andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Marlin 2.0 for Flying Bear 4S/5
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
19320 Commits
4 Branches
6 Tags
134 MiB
 
 
 
 
 
 
Tree: f833f201aa
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from 'f833f201aa'
${ noResults }
Marlin_FB4S/Marlin/src/HAL/STM32F1/HAL.cpp

341 lines
14 KiB
Raw Blame History

/**
* Marlin 3D Printer Firmware
*
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
* Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
* Copyright (c) 2017 Victor Perez
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
/**
* HAL for stm32duino.com based on Libmaple and compatible (STM32F1)
*/
#ifdef __STM32F1__
#include "../../inc/MarlinConfig.h"
#include "HAL.h"
#include <STM32ADC.h>
// ------------------------
// Types
// ------------------------
#define __I
#define __IO volatile
typedef struct {
__I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
__IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
__IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
__IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
__IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
__IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
__IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
__IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
__IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
__IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
__IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
__IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
__IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
__IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
__I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
__I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
__I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
__I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
__I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
uint32_t RESERVED0[5];
__IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
} SCB_Type;
// ------------------------
// Local defines
// ------------------------
#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
/* SCB Application Interrupt and Reset Control Register Definitions */
#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */
#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
// ------------------------
// Serial ports
// ------------------------
#if defined(SERIAL_USB) && !HAS_SD_HOST_DRIVE
USBSerial SerialUSB;
DefaultSerial1 MSerial0(true, SerialUSB);
#if ENABLED(EMERGENCY_PARSER)
#include "../libmaple/usb/stm32f1/usb_reg_map.h"
#include "libmaple/usb_cdcacm.h"
// The original callback is not called (no way to retrieve address).
// That callback detects a special STM32 reset sequence: this functionality is not essential
// as M997 achieves the same.
void my_rx_callback(unsigned int, void*) {
// max length of 16 is enough to contain all emergency commands
uint8 buf[16];
//rx is usbSerialPart.endpoints[2]
uint16 len = usb_get_ep_rx_count(USB_CDCACM_RX_ENDP);
uint32 total = usb_cdcacm_data_available();
if (len == 0 || total == 0 || !WITHIN(total, len, COUNT(buf)))
return;
// cannot get character by character due to bug in composite_cdcacm_peek_ex
len = usb_cdcacm_peek(buf, total);
for (uint32 i = 0; i < len; i++)
emergency_parser.update(MSerial0.emergency_state, buf[i + total - len]);
}
#endif
#endif
// ------------------------
// ADC
// ------------------------
// Watch out for recursion here! Our pin_t is signed, so pass through to Arduino -> analogRead(uint8_t)
uint16_t analogRead(const pin_t pin) {
const bool is_analog = _GET_MODE(pin) == GPIO_INPUT_ANALOG;
return is_analog ? analogRead(uint8_t(pin)) : 0;
}
// Wrapper to maple unprotected analogWrite
void analogWrite(const pin_t pin, int pwm_val8) {
if (PWM_PIN(pin)) analogWrite(uint8_t(pin), pwm_val8);
}
uint16_t MarlinHAL::adc_result;
// ------------------------
// Private functions
// ------------------------
static void NVIC_SetPriorityGrouping(uint32_t PriorityGroup) {
uint32_t reg_value;
uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); // only values 0..7 are used
reg_value = SCB->AIRCR; // read old register configuration
reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); // clear bits to change
reg_value = (reg_value |
((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) |
(PriorityGroupTmp << 8)); // Insert write key & priority group
SCB->AIRCR = reg_value;
}
// ------------------------
// Public functions
// ------------------------
void flashFirmware(const int16_t) { hal.reboot(); }
//
// Leave PA11/PA12 intact if USBSerial is not used
//
#if SERIAL_USB
namespace wirish { namespace priv {
#if SERIAL_PORT > 0
#if SERIAL_PORT2
#if SERIAL_PORT2 > 0
void board_setup_usb() {}
#endif
#else
void board_setup_usb() {}
#endif
#endif
} }
#endif
TERN_(POSTMORTEM_DEBUGGING, extern void install_min_serial());
// ------------------------
// MarlinHAL class
// ------------------------
void MarlinHAL::init() {
NVIC_SetPriorityGrouping(0x3);
#if PIN_EXISTS(LED)
OUT_WRITE(LED_PIN, LOW);
#endif
#if HAS_SD_HOST_DRIVE
MSC_SD_init();
#elif BOTH(SERIAL_USB, EMERGENCY_PARSER)
usb_cdcacm_set_hooks(USB_CDCACM_HOOK_RX, my_rx_callback);
#endif
#if PIN_EXISTS(USB_CONNECT)
OUT_WRITE(USB_CONNECT_PIN, !USB_CONNECT_INVERTING); // USB clear connection
delay(1000); // Give OS time to notice
WRITE(USB_CONNECT_PIN, USB_CONNECT_INVERTING);
#endif
TERN_(POSTMORTEM_DEBUGGING, install_min_serial()); // Install the minimal serial handler
}
// HAL idle task
void MarlinHAL::idletask() {
#if HAS_SHARED_MEDIA
// If Marlin is using the SD card we need to lock it to prevent access from
// a PC via USB.
// Other HALs use IS_SD_PRINTING() and IS_SD_FILE_OPEN() to check for access but
// this will not reliably detect delete operations. To be safe we will lock
// the disk if Marlin has it mounted. Unfortunately there is currently no way
// to unmount the disk from the LCD menu.
// if (IS_SD_PRINTING() || IS_SD_FILE_OPEN())
/* copy from lpc1768 framework, should be fixed later for process HAS_SD_HOST_DRIVE*/
// process USB mass storage device class loop
MarlinMSC.loop();
#endif
}
void MarlinHAL::reboot() { nvic_sys_reset(); }
extern "C" {
extern unsigned int _ebss; // end of bss section
}
/**
* TODO: Change this to correct it for libmaple
*/
// return free memory between end of heap (or end bss) and whatever is current
/*
#include <wirish/syscalls.c>
//extern caddr_t _sbrk(int incr);
#ifndef CONFIG_HEAP_END
extern char _lm_heap_end;
#define CONFIG_HEAP_END ((caddr_t)&_lm_heap_end)
#endif
extern "C" {
static int freeMemory() {
char top = 't';
return &top - reinterpret_cast<char*>(sbrk(0));
}
int freeMemory() {
int free_memory;
int heap_end = (int)_sbrk(0);
free_memory = ((int)&free_memory) - ((int)heap_end);
return free_memory;
}
}
*/
//
// ADC
//
enum ADCIndex : uint8_t {
OPTITEM(HAS_TEMP_ADC_0, TEMP_0)
OPTITEM(HAS_TEMP_ADC_1, TEMP_1)
OPTITEM(HAS_TEMP_ADC_2, TEMP_2)
OPTITEM(HAS_TEMP_ADC_3, TEMP_3)
OPTITEM(HAS_TEMP_ADC_4, TEMP_4)
OPTITEM(HAS_TEMP_ADC_5, TEMP_5)
OPTITEM(HAS_TEMP_ADC_6, TEMP_6)
OPTITEM(HAS_TEMP_ADC_7, TEMP_7)
OPTITEM(HAS_HEATED_BED, TEMP_BED)
OPTITEM(HAS_TEMP_CHAMBER, TEMP_CHAMBER)
OPTITEM(HAS_TEMP_ADC_PROBE, TEMP_PROBE)
OPTITEM(HAS_TEMP_COOLER, TEMP_COOLER)
OPTITEM(HAS_TEMP_BOARD, TEMP_BOARD)
OPTITEM(FILAMENT_WIDTH_SENSOR, FILWIDTH)
OPTITEM(HAS_ADC_BUTTONS, ADC_KEY)
OPTITEM(HAS_JOY_ADC_X, JOY_X)
OPTITEM(HAS_JOY_ADC_Y, JOY_Y)
OPTITEM(HAS_JOY_ADC_Z, JOY_Z)
OPTITEM(POWER_MONITOR_CURRENT, POWERMON_CURRENT)
OPTITEM(POWER_MONITOR_VOLTAGE, POWERMON_VOLTS)
ADC_COUNT
};
static uint16_t adc_results[ADC_COUNT];
// Init the AD in continuous capture mode
void MarlinHAL::adc_init() {
static const uint8_t adc_pins[] = {
OPTITEM(HAS_TEMP_ADC_0, TEMP_0_PIN)
OPTITEM(HAS_TEMP_ADC_1, TEMP_1_PIN)
OPTITEM(HAS_TEMP_ADC_2, TEMP_2_PIN)
OPTITEM(HAS_TEMP_ADC_3, TEMP_3_PIN)
OPTITEM(HAS_TEMP_ADC_4, TEMP_4_PIN)
OPTITEM(HAS_TEMP_ADC_5, TEMP_5_PIN)
OPTITEM(HAS_TEMP_ADC_6, TEMP_6_PIN)
OPTITEM(HAS_TEMP_ADC_7, TEMP_7_PIN)
OPTITEM(HAS_HEATED_BED, TEMP_BED_PIN)
OPTITEM(HAS_TEMP_CHAMBER, TEMP_CHAMBER_PIN)
OPTITEM(HAS_TEMP_ADC_PROBE, TEMP_PROBE_PIN)
OPTITEM(HAS_TEMP_COOLER, TEMP_COOLER_PIN)
OPTITEM(HAS_TEMP_BOARD, TEMP_BOARD_PIN)
OPTITEM(FILAMENT_WIDTH_SENSOR, FILWIDTH_PIN)
OPTITEM(HAS_ADC_BUTTONS, ADC_KEYPAD_PIN)
OPTITEM(HAS_JOY_ADC_X, JOY_X_PIN)
OPTITEM(HAS_JOY_ADC_Y, JOY_Y_PIN)
OPTITEM(HAS_JOY_ADC_Z, JOY_Z_PIN)
OPTITEM(POWER_MONITOR_CURRENT, POWER_MONITOR_CURRENT_PIN)
OPTITEM(POWER_MONITOR_VOLTAGE, POWER_MONITOR_VOLTAGE_PIN)
};
static STM32ADC adc(ADC1);
// configure the ADC
adc.calibrate();
adc.setSampleRate((F_CPU > 72000000) ? ADC_SMPR_71_5 : ADC_SMPR_41_5); // 71.5 or 41.5 ADC cycles
adc.setPins((uint8_t *)adc_pins, ADC_COUNT);
adc.setDMA(adc_results, uint16_t(ADC_COUNT), uint32_t(DMA_MINC_MODE | DMA_CIRC_MODE), nullptr);
adc.setScanMode();
adc.setContinuous();
adc.startConversion();
}
void MarlinHAL::adc_start(const pin_t pin) {
#define __TCASE(N,I) case N: pin_index = I; break;
#define _TCASE(C,N,I) TERN_(C, __TCASE(N, I))
ADCIndex pin_index;
switch (pin) {
default: return;
_TCASE(HAS_TEMP_ADC_0, TEMP_0_PIN, TEMP_0)
_TCASE(HAS_TEMP_ADC_1, TEMP_1_PIN, TEMP_1)
_TCASE(HAS_TEMP_ADC_2, TEMP_2_PIN, TEMP_2)
_TCASE(HAS_TEMP_ADC_3, TEMP_3_PIN, TEMP_3)
_TCASE(HAS_TEMP_ADC_4, TEMP_4_PIN, TEMP_4)
_TCASE(HAS_TEMP_ADC_5, TEMP_5_PIN, TEMP_5)
_TCASE(HAS_TEMP_ADC_6, TEMP_6_PIN, TEMP_6)
_TCASE(HAS_TEMP_ADC_7, TEMP_7_PIN, TEMP_7)
_TCASE(HAS_HEATED_BED, TEMP_BED_PIN, TEMP_BED)
_TCASE(HAS_TEMP_CHAMBER, TEMP_CHAMBER_PIN, TEMP_CHAMBER)
_TCASE(HAS_TEMP_ADC_PROBE, TEMP_PROBE_PIN, TEMP_PROBE)
_TCASE(HAS_TEMP_COOLER, TEMP_COOLER_PIN, TEMP_COOLER)
_TCASE(HAS_TEMP_BOARD, TEMP_BOARD_PIN, TEMP_BOARD)
_TCASE(HAS_JOY_ADC_X, JOY_X_PIN, JOY_X)
_TCASE(HAS_JOY_ADC_Y, JOY_Y_PIN, JOY_Y)
_TCASE(HAS_JOY_ADC_Z, JOY_Z_PIN, JOY_Z)
_TCASE(FILAMENT_WIDTH_SENSOR, FILWIDTH_PIN, FILWIDTH)
_TCASE(HAS_ADC_BUTTONS, ADC_KEYPAD_PIN, ADC_KEY)
_TCASE(POWER_MONITOR_CURRENT, POWER_MONITOR_CURRENT_PIN, POWERMON_CURRENT)
_TCASE(POWER_MONITOR_VOLTAGE, POWER_MONITOR_VOLTAGE_PIN, POWERMON_VOLTS)
}
adc_result = (adc_results[(int)pin_index] & 0xFFF) >> (12 - HAL_ADC_RESOLUTION); // shift out unused bits
}
#endif // __STM32F1__