Marlin_FB4S/Marlin/language_it.h


								/**

								 * Marlin 3D Printer Firmware

								 * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]

								 *

								 * Based on Sprinter and grbl.

								 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm

								 *

								 * This program is free software: you can redistribute it and/or modify

								 * it under the terms of the GNU General Public License as published by

								 * the Free Software Foundation, either version 3 of the License, or

								 * (at your option) any later version.

								 *

								 * This program is distributed in the hope that it will be useful,

								 * but WITHOUT ANY WARRANTY; without even the implied warranty of

								 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

								 * GNU General Public License for more details.

								 *

								 * You should have received a copy of the GNU General Public License

								 * along with this program.  If not, see <http://www.gnu.org/licenses/>.

								 *

								 */


								/**

								 * Italian

								 *

								 * LCD Menu Messages

								 * See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language

								 *

								 */

								#ifndef LANGUAGE_IT_H

								#define LANGUAGE_IT_H


								// Define SIMULATE_ROMFONT to see what is seen on the character based display defined in Configuration.h

								//#define SIMULATE_ROMFONT

								#define DISPLAY_CHARSET_ISO10646_1


								#define WELCOME_MSG                         MACHINE_NAME " pronto."

								#define MSG_SD_INSERTED                     "SD Card inserita"

								#define MSG_SD_REMOVED                      "SD Card rimossa"

								#define MSG_LCD_ENDSTOPS                    "Endstop"

								#define MSG_MAIN                            "Menu principale"

								#define MSG_AUTOSTART                       "Autostart"

								#define MSG_DISABLE_STEPPERS                "Disabilita Motori"

								#define MSG_AUTO_HOME                       "Auto Home"

								#define MSG_AUTO_HOME_X                     "Home asse X"

								#define MSG_AUTO_HOME_Y                     "Home asse Y"

								#define MSG_AUTO_HOME_Z                     "Home asse Z"

								#define MSG_LEVEL_BED_HOMING                "Home assi XYZ"

								#define MSG_LEVEL_BED_WAITING               "Premi per Iniziare"

								#define MSG_LEVEL_BED_NEXT_POINT            "Punto successivo"

								#define MSG_LEVEL_BED_DONE                  "Livel. terminato!"

								#define MSG_LEVEL_BED_CANCEL                "Annulla"

								#define MSG_SET_HOME_OFFSETS                "Imp. offset home"

								#define MSG_HOME_OFFSETS_APPLIED            "Offset applicato"

								#define MSG_SET_ORIGIN                      "Imposta Origine"

								#define MSG_PREHEAT_1                       "Preriscalda PLA"

								#define MSG_PREHEAT_1_N                     MSG_PREHEAT_1 " "

								#define MSG_PREHEAT_1_ALL                   MSG_PREHEAT_1 " Tutto"

								#define MSG_PREHEAT_1_BEDONLY               MSG_PREHEAT_1 " Piatto"

								#define MSG_PREHEAT_1_SETTINGS              MSG_PREHEAT_1 " conf"

								#define MSG_PREHEAT_2                       "Preriscalda ABS"

								#define MSG_PREHEAT_2_N                     MSG_PREHEAT_2 " "

								#define MSG_PREHEAT_2_ALL                   MSG_PREHEAT_2 " Tutto"

								#define MSG_PREHEAT_2_BEDONLY               MSG_PREHEAT_2 " Piatto"

								#define MSG_PREHEAT_2_SETTINGS              MSG_PREHEAT_2 " conf"

								#define MSG_COOLDOWN                        "Raffredda"

								#define MSG_SWITCH_PS_ON                    "Accendi aliment."

								#define MSG_SWITCH_PS_OFF                   "Spegni aliment."

								#define MSG_EXTRUDE                         "Estrudi"

								#define MSG_RETRACT                         "Ritrai"

								#define MSG_MOVE_AXIS                       "Muovi Asse"

								#define MSG_LEVEL_BED                       "Livella piano"

								#define MSG_MOVE_X                          "Muovi X"

								#define MSG_MOVE_Y                          "Muovi Y"

								#define MSG_MOVE_Z                          "Muovi Z"

								#define MSG_MOVE_E                          "Estrusore"

								#define MSG_MOVE_01MM                       "Muovi di 0.1mm"

								#define MSG_MOVE_1MM                        "Muovi di   1mm"

								#define MSG_MOVE_10MM                       "Muovi di  10mm"

								#define MSG_SPEED                           "Velocità"

								#define MSG_BED_Z                           "piatto Z"

								#define MSG_NOZZLE                          "Ugello"

								#define MSG_BED                             "Piatto"

								#define MSG_FAN_SPEED                       "Velocità ventola"

								#define MSG_FLOW                            "Flusso"

								#define MSG_CONTROL                         "Controllo"

								#define MSG_MIN                             LCD_STR_THERMOMETER " Min"

								#define MSG_MAX                             LCD_STR_THERMOMETER " Max"

								#define MSG_FACTOR                          LCD_STR_THERMOMETER " Fact"

								#define MSG_AUTOTEMP                        "Autotemp"

								#define MSG_ON                              "On "

								#define MSG_OFF                             "Off"

								#define MSG_PID_P                           "PID-P"

								#define MSG_PID_I                           "PID-I"

								#define MSG_PID_D                           "PID-D"

								#define MSG_PID_C                           "PID-C"

								#define MSG_ACC                             "Accel"

								#define MSG_VXY_JERK                        "Vxy-jerk"

								#define MSG_VZ_JERK                         "Vz-jerk"

								#define MSG_VE_JERK                         "Ve-jerk"

								#define MSG_VMAX                            "Vmax "

								#define MSG_X                               "X"

								#define MSG_Y                               "Y"

								#define MSG_Z                               "Z"

								#define MSG_E                               "E"

								#define MSG_VMIN                            "Vmin"

								#define MSG_VTRAV_MIN                       "VTrav min"

								#define MSG_AMAX                            "Amax "

								#define MSG_A_RETRACT                       "A-retract"

								#define MSG_A_TRAVEL                        "A-Spostamento"

								#define MSG_XSTEPS                          "Xpassi/mm"

								#define MSG_YSTEPS                          "Ypassi/mm"

								#define MSG_ZSTEPS                          "Zpassi/mm"

								#define MSG_ESTEPS                          "Epassi/mm"

								#define MSG_TEMPERATURE                     "Temperatura"

								#define MSG_MOTION                          "Movimento"

								#define MSG_VOLUMETRIC                      "Filamento"

								#define MSG_VOLUMETRIC_ENABLED              "E in mm3"

								#define MSG_FILAMENT_DIAM                   "Diam. filo"

								#define MSG_CONTRAST                        "Contrasto LCD"

								#define MSG_STORE_EPROM                     "Salva in memoria"

								#define MSG_LOAD_EPROM                      "Carica da memoria"

								#define MSG_RESTORE_FAILSAFE                "Ripristina imp."

								#define MSG_REFRESH                         "Aggiorna"

								#define MSG_WATCH                           "Guarda"

								#define MSG_PREPARE                         "Prepara"

								#define MSG_TUNE                            "Regola"

								#define MSG_PAUSE_PRINT                     "Pausa"

								#define MSG_RESUME_PRINT                    "Riprendi stampa"

								#define MSG_STOP_PRINT                      "Arresta stampa"

								#define MSG_CARD_MENU                       "Stampa da SD"

								#define MSG_NO_CARD                         "SD non presente"

								#define MSG_DWELL                           "Sospensione..."

								#define MSG_USERWAIT                        "Attendi Utente.."

								#define MSG_RESUMING                        "Riprendi Stampa"

								#define MSG_PRINT_ABORTED                   "Stampa annullata"

								#define MSG_NO_MOVE                         "Nessun Movimento"

								#define MSG_KILLED                          "UCCISO. "

								#define MSG_STOPPED                         "ARRESTATO. "

								#define MSG_CONTROL_RETRACT                 "Ritrai mm"

								#define MSG_CONTROL_RETRACT_SWAP            "Scamb. Ritrai mm"

								#define MSG_CONTROL_RETRACTF                "Ritrai  V"

								#define MSG_CONTROL_RETRACT_ZLIFT           "Salta mm"

								#define MSG_CONTROL_RETRACT_RECOVER         "UnRet +mm"

								#define MSG_CONTROL_RETRACT_RECOVER_SWAP    "Scamb. UnRet+mm"

								#define MSG_CONTROL_RETRACT_RECOVERF        "UnRet  V"

								#define MSG_AUTORETRACT                     "AutoRitrai"

								#define MSG_FILAMENTCHANGE                  "Cambia filamento"

								#define MSG_INIT_SDCARD                     "Iniz. SD-Card"

								#define MSG_CNG_SDCARD                      "Cambia SD-Card"

								#define MSG_ZPROBE_OUT                      "Z probe out. bed"

								#define MSG_HOME                            "Home"  // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST

								#define MSG_FIRST                           "first"

								#define MSG_ZPROBE_ZOFFSET                  "Z Offset"

								#define MSG_BABYSTEP_X                      "Babystep X"

								#define MSG_BABYSTEP_Y                      "Babystep Y"

								#define MSG_BABYSTEP_Z                      "Babystep Z"

								#define MSG_ENDSTOP_ABORT                   "Finecorsa abort"

								#define MSG_HEATING_FAILED_LCD              "Riscald. Fallito"

								#define MSG_ERR_REDUNDANT_TEMP              "Err: TEMP RIDONDANTI"

								#define MSG_THERMAL_RUNAWAY                 "TEMP FUORI CONTROLLO"

								#define MSG_ERR_MAXTEMP                     "Err: TEMP MASSIMA"

								#define MSG_ERR_MINTEMP                     "Err: TEMP MINIMA"

								#define MSG_ERR_MAXTEMP_BED                 "Err: TEMP MASSIMA PIATTO"

								#define MSG_ERR_MINTEMP_BED                 "Err: TEMP MINIMA PIATTO"

								#define MSG_HALTED                          "STAMPANTE FERMATA"

								#define MSG_PLEASE_RESET                    "Riavviare prego"

								#define MSG_HEATING                         "Riscaldamento.."

								#define MSG_HEATING_COMPLETE                "Risc. completato"

								#define MSG_BED_HEATING                     "Risc. Piatto.."

								#define MSG_BED_DONE                        "Piatto Pronto"

								#define MSG_DELTA_CALIBRATE                 "Calibraz. Delta"

								#define MSG_DELTA_CALIBRATE_X               "Calibra X"

								#define MSG_DELTA_CALIBRATE_Y               "Calibra Y"

								#define MSG_DELTA_CALIBRATE_Z               "Calibra Z"

								#define MSG_DELTA_CALIBRATE_CENTER          "Calibra Center"

								#define MSG_INFO_MENU                       "Riguardo stampante"

								#define MSG_INFO_PRINTER_MENU               "Info. stampante"

								#define MSG_INFO_STATS_MENU                 "Statistiche"

								#define MSG_INFO_BOARD_MENU                 "Info. scheda"

								#define MSG_INFO_THERMISTOR_MENU            "Termistori"

								#define MSG_INFO_EXTRUDERS                  "Estrusori"

								#define MSG_INFO_BAUDRATE                   "Baud"

								#define MSG_INFO_PROTOCOL                   "Protocollo"

								#if LCD_WIDTH > 19

								  #define MSG_INFO_PRINT_COUNT              "Contat. stampa"

								  #define MSG_INFO_FINISHED_PRINTS          "Finiti        "

								  #define MSG_INFO_PRINT_TIME               "Tempo totale  "

								#else

								  #define MSG_INFO_PRINT_COUNT              "Stampe   "

								  #define MSG_INFO_FINISHED_PRINTS          "Finiti   "

								  #define MSG_INFO_PRINT_TIME               "Durata   "

								#endif

								#define MSG_INFO_MIN_TEMP                   "Temp min"

								#define MSG_INFO_MAX_TEMP                   "Temp max"

								#define MSG_INFO_PSU                        "Alimentatore"


								#define MSG_FILAMENT_CHANGE_HEADER          "CAMBIA FILAMENTO"

								#define MSG_FILAMENT_CHANGE_OPTION_HEADER   "CAMBIA OPZIONI:"

								#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  "Estrusione"

								#define MSG_FILAMENT_CHANGE_OPTION_RESUME   "Riprendi stampa"

								#if LCD_HEIGHT >= 4

								  #define MSG_FILAMENT_CHANGE_INIT_1          "Attendere avvio"

								  #define MSG_FILAMENT_CHANGE_INIT_2          "del cambio"

								  #define MSG_FILAMENT_CHANGE_INIT_3          "di filamento"

								  #define MSG_FILAMENT_CHANGE_UNLOAD_1        "Attendere"

								  #define MSG_FILAMENT_CHANGE_UNLOAD_2        "l'espulsione"

								  #define MSG_FILAMENT_CHANGE_UNLOAD_3        "del filamento"

								  #define MSG_FILAMENT_CHANGE_INSERT_1        "Inserisci il"

								  #define MSG_FILAMENT_CHANGE_INSERT_2        "filamento e"

								  #define MSG_FILAMENT_CHANGE_INSERT_3        "premi per cont"

								  #define MSG_FILAMENT_CHANGE_LOAD_1          "Attendere"

								  #define MSG_FILAMENT_CHANGE_LOAD_2          "il caricamento"

								  #define MSG_FILAMENT_CHANGE_LOAD_3          "del filamento"

								  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       "Attendere"

								  #define MSG_FILAMENT_CHANGE_EXTRUDE_2       "l'estrusione"

								  #define MSG_FILAMENT_CHANGE_EXTRUDE_3       "del filamento"

								  #define MSG_FILAMENT_CHANGE_RESUME_1        "Attendere"

								  #define MSG_FILAMENT_CHANGE_RESUME_2        "la ripresa"

								  #define MSG_FILAMENT_CHANGE_RESUME_3        "della stampa"

								#else // LCD_HEIGHT < 4

								  #define MSG_FILAMENT_CHANGE_INIT_1          "Attendere..."

								  #define MSG_FILAMENT_CHANGE_UNLOAD_1        "Espulsione..."

								  #define MSG_FILAMENT_CHANGE_INSERT_1        "Inserisci e premi"

								  #define MSG_FILAMENT_CHANGE_LOAD_1          "Caricamento..."

								  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       "Estrusione..."

								  #define MSG_FILAMENT_CHANGE_RESUME_1        "Ripresa..."

								#endif // LCD_HEIGHT < 4


								#endif // LANGUAGE_IT_H