Marlin 2.0 for Flying Bear 4S/5
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

246 lines
12 KiB

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Danish
*
* LCD Menu Messages
* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
*
*/
#ifndef LANGUAGE_DA_H
#define LANGUAGE_DA_H
#define MAPPER_C2C3
#define DISPLAY_CHARSET_ISO10646_1
#define WELCOME_MSG MACHINE_NAME " er klar"
#define MSG_SD_INSERTED "Kort isat"
#define MSG_SD_REMOVED "Kort fjernet"
#define MSG_LCD_ENDSTOPS "Endstops" // Max length 8 characters
#define MSG_MAIN "Menu"
#define MSG_AUTOSTART "Autostart"
#define MSG_DISABLE_STEPPERS "Slå alle steppere fra"
#define MSG_AUTO_HOME "Auto Home" // G28
#define MSG_AUTO_HOME_X "Home X"
#define MSG_AUTO_HOME_Y "Home Y"
#define MSG_AUTO_HOME_Z "Home Z"
#define MSG_LEVEL_BED_HOMING "Homing XYZ"
#define MSG_LEVEL_BED_WAITING "Klik når du er klar"
#define MSG_LEVEL_BED_NEXT_POINT "Næste punkt"
#define MSG_LEVEL_BED_DONE "Bed level er færdig!"
#define MSG_LEVEL_BED_CANCEL "Annuller bed level"
#define MSG_SET_HOME_OFFSETS "Sæt forsk. af home"
#define MSG_HOME_OFFSETS_APPLIED "Forsk. er nu aktiv"
#define MSG_SET_ORIGIN "Sæt origin"
#define MSG_PREHEAT_1 "Forvarm PLA"
#define MSG_PREHEAT_1_N "Forvarm PLA "
#define MSG_PREHEAT_1_ALL "Forvarm PLA Alle"
#define MSG_PREHEAT_1_BEDONLY "Forvarm PLA Bed"
#define MSG_PREHEAT_1_SETTINGS "Forvarm PLA conf"
#define MSG_PREHEAT_2 "Forvarm ABS"
#define MSG_PREHEAT_2_N "Forvarm ABS "
#define MSG_PREHEAT_2_ALL "Forvarm ABS Alle"
#define MSG_PREHEAT_2_BEDONLY "Forvarm ABS Bed"
#define MSG_PREHEAT_2_SETTINGS "Forvarm ABS conf"
#define MSG_COOLDOWN "Afkøl"
#define MSG_SWITCH_PS_ON "Slå strøm til"
#define MSG_SWITCH_PS_OFF "Slå strøm fra"
#define MSG_EXTRUDE "Extruder"
#define MSG_RETRACT "Retract"
#define MSG_MOVE_AXIS "Flyt akser"
#define MSG_LEVEL_BED "Juster bed"
#define MSG_MOVE_X "Flyt X"
#define MSG_MOVE_Y "Flyt Y"
#define MSG_MOVE_Z "Flyt Z"
#define MSG_MOVE_E "Extruder"
#define MSG_MOVE_01MM "Flyt 0.1mm"
#define MSG_MOVE_1MM "Flyt 1mm"
#define MSG_MOVE_10MM "Flyt 10mm"
#define MSG_SPEED "Hastighed"
#define MSG_BED_Z "Plade Z"
#define MSG_NOZZLE "Dyse"
#define MSG_BED "Plade"
#define MSG_FAN_SPEED "Blæser hastighed"
#define MSG_FLOW "Flow"
#define MSG_CONTROL "Kontrol"
#define MSG_MIN " \002 Min"
#define MSG_MAX " \002 Max"
#define MSG_FACTOR " \002 Fact"
#define MSG_AUTOTEMP "Autotemp"
#define MSG_ON "Til "
#define MSG_OFF "Fra"
#define MSG_PID_P "PID-P"
#define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
#define MSG_SELECT "Vælg"
#define MSG_ACC "Accel"
#define MSG_VX_JERK "Vx-jerk"
#define MSG_VY_JERK "Vy-jerk"
#define MSG_VZ_JERK "Vz-jerk"
#define MSG_VE_JERK "Ve-jerk"
#define MSG_VMAX "Vmax "
#define MSG_VMIN "Vmin"
#define MSG_VTRAV_MIN "VTrav min"
#define MSG_AMAX "Amax "
#define MSG_A_RETRACT "A-retract"
#define MSG_A_TRAVEL "A-rejse"
#define MSG_XSTEPS "Xsteps/mm"
#define MSG_YSTEPS "Ysteps/mm"
#define MSG_ZSTEPS "Zsteps/mm"
#define MSG_ESTEPS "Esteps/mm"
#define MSG_E1STEPS "E1steps/mm"
#define MSG_E2STEPS "E2steps/mm"
#define MSG_E3STEPS "E3steps/mm"
#define MSG_E4STEPS "E4steps/mm"
#define MSG_TEMPERATURE "Temperatur"
#define MSG_MOTION "Bevægelse"
#define MSG_VOLUMETRIC "Filament"
#define MSG_VOLUMETRIC_ENABLED "E i mm3"
#define MSG_FILAMENT_DIAM "Fil. Dia."
#define MSG_CONTRAST "LCD kontrast"
#define MSG_STORE_EPROM "Gem i EEPROM"
#define MSG_LOAD_EPROM "Hent fra EEPROM"
#define MSG_RESTORE_FAILSAFE "Gendan failsafe"
#define MSG_REFRESH "Genopfrisk"
#define MSG_WATCH "Info skærm"
#define MSG_PREPARE "Forbered"
#define MSG_TUNE "Tune"
#define MSG_PAUSE_PRINT "Pause printet"
#define MSG_RESUME_PRINT "Forsæt printet"
#define MSG_STOP_PRINT "Stop printet"
#define MSG_CARD_MENU "Print fra SD"
#define MSG_NO_CARD "Intet SD kort"
#define MSG_DWELL "Dvale..."
#define MSG_USERWAIT "Venter på bruger..."
#define MSG_RESUMING "Forsætter printet"
#define MSG_PRINT_ABORTED "Print annulleret"
#define MSG_NO_MOVE "Ingen bevægelse."
#define MSG_KILLED "DRÆBT. "
#define MSG_STOPPED "STOPPET. "
#define MSG_CONTROL_RETRACT "Tilbagetræk mm"
#define MSG_CONTROL_RETRACT_SWAP "Skift Re.mm"
#define MSG_CONTROL_RETRACTF "Tilbagetræk V"
#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Skift UnRet+mm"
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"
#define MSG_AUTORETRACT "AutoRetr."
#define MSG_FILAMENTCHANGE "Skift filament"
#define MSG_INIT_SDCARD "Init. SD card"
#define MSG_CNG_SDCARD "Skift SD kort"
#define MSG_ZPROBE_OUT "Probe udenfor plade"
#define MSG_BLTOUCH_SELFTEST "BLTouch Selv-Test"
#define MSG_BLTOUCH_RESET "Reset BLTouch"
#define MSG_HOME "Home" // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST "først"
#define MSG_ZPROBE_ZOFFSET "Z Offset"
#define MSG_BABYSTEP_X "Babystep X"
#define MSG_BABYSTEP_Y "Babystep Y"
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Endstop abort"
#define MSG_HEATING_FAILED_LCD "Opvarmning fejlet"
#define MSG_ERR_REDUNDANT_TEMP "Fejl: reserve temp"
#define MSG_THERMAL_RUNAWAY "Temp løber løbsk"
#define MSG_ERR_MAXTEMP "Fejl: Maks temp"
#define MSG_ERR_MINTEMP "Fejl: Min temp"
#define MSG_ERR_MAXTEMP_BED "Fejl: Maks Plade temp"
#define MSG_ERR_MINTEMP_BED "Fejl: Min Plade temp"
#define MSG_ERR_Z_HOMING "G28 Z Forbudt"
#define MSG_HALTED "PRINTER STOPPET"
#define MSG_PLEASE_RESET "Reset Venligst"
#define MSG_SHORT_DAY "d" // Kun et bogstav
#define MSG_SHORT_HOUR "h" // Kun et bogstav
#define MSG_SHORT_MINUTE "m" // Kun et bogstav
#define MSG_HEATING "Opvarmer..."
#define MSG_HEATING_COMPLETE "Opvarmet"
#define MSG_BED_HEATING "Opvarmer plade"
#define MSG_BED_DONE "Plade opvarmet"
#define MSG_DELTA_CALIBRATE "Delta Kalibrering"
#define MSG_DELTA_CALIBRATE_X "Kalibrer X"
#define MSG_DELTA_CALIBRATE_Y "Kalibrer Y"
#define MSG_DELTA_CALIBRATE_Z "Kalibrer Z"
#define MSG_DELTA_CALIBRATE_CENTER "Kalibrerings Center"
#define MSG_INFO_MENU "Om Printer"
#define MSG_INFO_PRINTER_MENU "Printer Info"
#define MSG_INFO_STATS_MENU "Printer Stats"
#define MSG_INFO_BOARD_MENU "Kort Info"
#define MSG_INFO_THERMISTOR_MENU "Thermistors"
#define MSG_INFO_EXTRUDERS "Extruders"
#define MSG_INFO_BAUDRATE "Baud"
#define MSG_INFO_PROTOCOL "Protocol"
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT "Ant. Prints"
#define MSG_INFO_COMPLETED_PRINTS "Færdige"
#define MSG_INFO_PRINT_TIME "Total print tid"
#define MSG_INFO_PRINT_LONGEST "Længste print"
#define MSG_INFO_PRINT_FILAMENT "Total Extruderet"
#else
#define MSG_INFO_PRINT_COUNT "Prints"
#define MSG_INFO_COMPLETED_PRINTS "Færdige"
#define MSG_INFO_PRINT_TIME "Total"
#define MSG_INFO_PRINT_LONGEST "Længste"
#define MSG_INFO_PRINT_FILAMENT "Extruderet"
#endif
#define MSG_INFO_MIN_TEMP "Min Temp"
#define MSG_INFO_MAX_TEMP "Max Temp"
#define MSG_INFO_PSU "Strømfors."
#define MSG_DRIVE_STRENGTH "Driv Styrke"
#define MSG_DAC_PERCENT "Driv %"
#define MSG_DAC_EEPROM_WRITE "DAC EEPROM Skriv"
#define MSG_FILAMENT_CHANGE_HEADER "SKIFT FILAMENT"
#define MSG_FILAMENT_CHANGE_OPTION_HEADER "Skift muligheder:"
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE "Extruder mere"
#define MSG_FILAMENT_CHANGE_OPTION_RESUME "Forsæt print"
#if LCD_HEIGHT >= 4
#define MSG_FILAMENT_CHANGE_INIT_1 "Vent på start"
#define MSG_FILAMENT_CHANGE_INIT_2 "af filament"
#define MSG_FILAMENT_CHANGE_INIT_3 "skift"
#define MSG_FILAMENT_CHANGE_UNLOAD_1 "Vent på"
#define MSG_FILAMENT_CHANGE_UNLOAD_2 "filament udskyd."
#define MSG_FILAMENT_CHANGE_INSERT_1 "Indsæt filament"
#define MSG_FILAMENT_CHANGE_INSERT_2 "og tryk på knap"
#define MSG_FILAMENT_CHANGE_INSERT_3 "for at fortsætte..."
#define MSG_FILAMENT_CHANGE_LOAD_1 "Vent på"
#define MSG_FILAMENT_CHANGE_LOAD_2 "filament indtag"
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Vent på"
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 "filament extrudering"
#define MSG_FILAMENT_CHANGE_RESUME_1 "Vent på at print"
#define MSG_FILAMENT_CHANGE_RESUME_2 "fortsætter"
#else // LCD_HEIGHT < 4
#define MSG_FILAMENT_CHANGE_INIT_1 "Vent venligst..."
#define MSG_FILAMENT_CHANGE_UNLOAD_1 "Udskyder..."
#define MSG_FILAMENT_CHANGE_INSERT_1 "Indsæt og klik"
#define MSG_FILAMENT_CHANGE_LOAD_1 "Indtager..."
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Extrudere..."
#define MSG_FILAMENT_CHANGE_RESUME_1 "Fortsætter..."
#endif // LCD_HEIGHT < 4
#endif // LANGUAGE_DA_H