andrey/Marlin_FB4S
Archived
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
This repository has been archived on 2025-12-23. You can view files and clone it. You cannot open issues or pull requests or push a commit.
Files
efbd705eda30e18f807799bd991662852afea94e
Marlin_FB4S/Marlin
History
AnHardt efbd705eda Replace the "ok" in M280, M301, M304, M851 with output not including an "ok" 
Replace the "ok" in M280, M301, M304, M851 with output not including an "ok"
to avoid senting two "ok"s for a single g-code.

Doing the same for M105 would break the input filters of the hosts.
For M105 the other "ok" is omitted.
2016-02-09 13:36:03 +01:00
..
configurator
Remove obsolete HEATER_BED_DUTY_CYCLE_DIVIDER #2977
2016-02-07 08:02:11 -06:00
example_configurations
Remove obsolete HEATER_BED_DUTY_CYCLE_DIVIDER #2977
2016-02-07 08:02:11 -06:00
fonts
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
scripts
Repair formula mangled by PR#1319 in Jan 2015
2016-01-15 10:06:27 -06:00
blinkm.cpp
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
blinkm.h
…
boards.h
Split RAMPS 1.3 an 1.4 (PR#2741)
2015-11-13 07:13:48 -06:00
buzzer.cpp
Suppress some compiler warnings
2015-08-16 06:56:47 -05:00
buzzer.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
cardreader.cpp
Getting rid of SDEXTRASLOW, SDSLOW variables.
2016-02-07 07:58:52 -06:00
cardreader.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
Conditionals.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
Configuration_adv.h
Clean up spacing and duplicate entries
2015-12-10 07:20:52 -06:00
configuration_store.cpp
Use "UNUSED" to squash compiler warnings
2015-11-12 00:03:22 -06:00
configuration_store.h
Overridable Options - Part 11 (PR#2563)
2015-07-31 01:07:04 -05:00
Configuration.h
Remove obsolete HEATER_BED_DUTY_CYCLE_DIVIDER #2977
2016-02-07 08:02:11 -06:00
Default_Version.h
Marlin 1.1.0 Release Candidate 3 - 01 December 2015
2015-12-01 07:24:45 -06:00
digipot_mcp4451.cpp
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
dogm_bitmaps.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
dogm_font_data_6x9_marlin.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
dogm_font_data_HD44780_C.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
dogm_font_data_HD44780_J.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
dogm_font_data_HD44780_W.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
dogm_font_data_ISO10646_1.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
dogm_font_data_ISO10646_5_Cyrillic.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
dogm_font_data_ISO10646_CN.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
dogm_font_data_ISO10646_Kana.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
dogm_font_data_Marlin_symbols.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
dogm_lcd_implementation.h
Use "defined" with LCD_PIN_BL and LCD_PIN_RESET
2015-11-12 00:03:22 -06:00
fastio.h
Clean up "else" and other spacing
2015-11-12 00:03:21 -06:00
language_an.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
language_bg.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
language_ca.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
language_cn.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
language_cz.h
Show nozzles, heaters, and extruders numbered 1-4
2015-09-12 07:40:18 -05:00
language_da.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
language_de.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
language_en.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
language_es.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
language_eu.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
language_fi.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
language_fr.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
language_gl.h
Galician (gl) language.
2015-09-30 14:46:01 -05:00
language_it.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
language_kana_utf8.h
Update language_kana_utf8.h
2015-11-12 00:00:32 -06:00
language_kana.h
Update language_kana.h
2015-11-12 00:00:51 -06:00
language_nl.h
Back port language translation
2015-12-10 06:31:41 -06:00
language_pl.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
language_pt-br.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
language_pt.h
Fix Portuguese (Portugal) strings (PR#2700)
2015-11-12 00:08:42 -06:00
language_ru.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
language_test.h
Cleanup file formatting
2015-09-12 07:48:27 -05:00
language.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
M100_Free_Mem_Chk.cpp
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
macros.h
Add COUNT macro and apply
2015-07-22 18:16:05 -05:00
Makefile
Split RAMPS 1.3 an 1.4 (PR#2741)
2015-11-13 07:13:48 -06:00
Marlin_main.cpp
Replace the "ok" in M280, M301, M304, M851 with output not including an "ok"
2016-02-09 13:36:03 +01:00
Marlin.h
Host parseble output for M109, M190 and M303
2015-12-07 15:37:53 -06:00
Marlin.ino
Apply ENABLED / DISABLED to Marlin core files (PR#2558)
2015-07-31 01:03:58 -05:00
MarlinSerial.cpp
Clean up "else" and other spacing
2015-11-12 00:03:21 -06:00
MarlinSerial.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
mesh_bed_leveling.cpp
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
mesh_bed_leveling.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
pins_3DRAG.h
Rename BEEPER to BEEPER_PIN
2015-07-31 17:13:53 -05:00
pins_5DPRINT.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
pins_99.h
…
pins_AZTEEG_X1.h
…
pins_AZTEEG_X3_PRO.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
pins_AZTEEG_X3.h
SDCARDDETECT -> SD_DETECT, added docs
2015-08-02 21:59:41 -05:00
pins_BAM_DICE_DUE.h
…
pins_BRAINWAVE_PRO.h
Call the probe pin a probe pin and not a min endstop
2015-12-10 07:20:52 -06:00
pins_BRAINWAVE.h
Overridable Options - Part 4 (PR#2556)
2015-07-31 00:44:53 -05:00
pins_CHEAPTRONIC.h
SDCARDDETECT -> SD_DETECT, added docs
2015-08-02 21:59:41 -05:00
pins_ELEFU_3.h
SDCARDDETECT -> SD_DETECT, added docs
2015-08-02 21:59:41 -05:00
pins_FELIX2.h
SDCARDDETECT -> SD_DETECT, added docs
2015-08-02 21:59:41 -05:00
pins_GEN3_MONOLITHIC.h
…
pins_GEN3_PLUS.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
pins_GEN6_DELUXE.h
…
pins_GEN6.h
…
pins_GEN7_12.h
…
pins_GEN7_13.h
…
pins_GEN7_14.h
…
pins_GEN7_CUSTOM.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
pins_K8200.h
…
pins_LEAPFROG.h
Move Y2 and Z2 pins defines to pins.h
2015-09-07 09:41:06 -05:00
pins_MEGACONTROLLER.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
pins_MEGATRONICS_2.h
SDCARDDETECT -> SD_DETECT, added docs
2015-08-02 21:59:41 -05:00
pins_MEGATRONICS_3.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
pins_MEGATRONICS.h
Apply remaining ENABLED/DISABLED conditionals
2015-08-03 16:04:48 -05:00
pins_MELZI_MAKR3D.h
Rename and repair MELZI_1284 (PR#2301)
2015-06-22 22:30:07 -04:00
pins_MELZI.h
…
pins_MINIRAMBO.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
pins_MINITRONICS.h
SDCARDDETECT -> SD_DETECT, added docs
2015-08-02 21:59:41 -05:00
pins_MKS_BASE.h
…
pins_OMCA_A.h
Rename BEEPER to BEEPER_PIN
2015-08-02 22:09:08 -05:00
pins_OMCA.h
SDCARDDETECT -> SD_DETECT, added docs
2015-08-02 21:59:41 -05:00
pins_PRINTRBOARD.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
pins_RAMBO.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
pins_RAMPS_13_EFB.h
…
pins_RAMPS_13.h
If unused, just don’t define it.
2015-12-10 07:20:52 -06:00
pins_RAMPS_OLD.h
Overridable Options - Part 4 (PR#2556)
2015-07-31 00:44:53 -05:00
pins_RIGIDBOARD.h
Fixing Rigidbot LCD Panel Support
2016-02-07 07:58:52 -06:00
pins_RUMBA.h
Fix up probe pin define and test
2015-09-10 10:54:03 -05:00
pins_SANGUINOLOLU_11.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
pins_SANGUINOLOLU_12.h
Rename and repair MELZI_1284 (PR#2301)
2015-06-22 22:30:07 -04:00
pins_SAV_MKI.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
pins_SETHI.h
…
pins_STB_11.h
…
pins_TEENSY2.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
pins_TEENSYLU.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
pins_ULTIMAIN_2.h
SDCARDDETECT -> SD_DETECT, added docs
2015-08-02 21:59:41 -05:00
pins_ULTIMAKER_OLD.h
…
pins_ULTIMAKER.h
Define servo pins just like other pins
2015-08-02 23:26:58 -05:00
pins.h
Split RAMPS 1.3 an 1.4 (PR#2741)
2015-11-13 07:13:48 -06:00
planner.cpp
Improve planner & stepper PR #263
2015-12-10 07:24:37 -06:00
planner.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
qr_solve.cpp
Use a ternary in qr_solve.cpp
2015-11-12 00:03:22 -06:00
qr_solve.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
SanityCheck.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
Sd2Card.cpp
Clean up "else" and other spacing
2015-11-12 00:03:21 -06:00
Sd2Card.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
Sd2PinMap.h
Clean up "else" and other spacing
2015-11-12 00:03:21 -06:00
SdBaseFile.cpp
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
SdBaseFile.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
SdFatConfig.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
SdFatStructs.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
SdFatUtil.cpp
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
SdFatUtil.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
SdFile.cpp
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
SdFile.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
SdInfo.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
SdVolume.cpp
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
SdVolume.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
servo.cpp
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
servo.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
speed_lookuptable.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
stepper_indirection.cpp
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
stepper_indirection.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
stepper.cpp
Update stepper.cpp
2016-01-15 16:50:43 +01:00
stepper.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
temperature.cpp
Host parseble output for M109, M190 and M303
2015-12-07 15:37:53 -06:00
temperature.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
thermistortables.h
Allow Thermistor #12 to be used on hotends also
2015-12-10 06:31:31 -06:00
ultralcd_implementation_hitachi_HD44780.h
Change XY formatting on LCD (PR#2740)
2015-11-13 06:46:11 -06:00
ultralcd_st7920_u8glib_rrd.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
ultralcd.cpp
Using SET_INPUT instead of pinMode
2016-02-07 07:58:52 -06:00
ultralcd.h
Cleaning up, getting rid of the fake encoder count variable.
2016-02-07 07:58:52 -06:00
utf_mapper.h
Use static locals in utf_mapper.h
2015-11-12 00:03:21 -06:00
vector_3.cpp
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
vector_3.h
Styling adjustments (PR#2668 & PR#2670)
2015-10-03 22:02:45 -05:00
watchdog.cpp
Clean up watchdog impl.
2015-11-12 00:03:22 -06:00
watchdog.h
Clean up watchdog impl.
2015-11-12 00:03:22 -06:00