Marlin_FB4S/Marlin/language_fr.h


								/**

								 * Marlin 3D Printer Firmware

								 * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]

								 *

								 * Based on Sprinter and grbl.

								 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm

								 *

								 * This program is free software: you can redistribute it and/or modify

								 * it under the terms of the GNU General Public License as published by

								 * the Free Software Foundation, either version 3 of the License, or

								 * (at your option) any later version.

								 *

								 * This program is distributed in the hope that it will be useful,

								 * but WITHOUT ANY WARRANTY; without even the implied warranty of

								 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

								 * GNU General Public License for more details.

								 *

								 * You should have received a copy of the GNU General Public License

								 * along with this program.  If not, see <http://www.gnu.org/licenses/>.

								 *

								 */


								/**

								 * French

								 *

								 * LCD Menu Messages

								 * See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language

								 *

								 */

								#ifndef LANGUAGE_FR_H

								#define LANGUAGE_FR_H


								#define DISPLAY_CHARSET_ISO10646_1


								#define WELCOME_MSG                         MACHINE_NAME " prete."

								#define MSG_SD_INSERTED                     "Carte inseree"

								#define MSG_SD_REMOVED                      "Carte retiree"

								#define MSG_LCD_ENDSTOPS                    "Butées" // Max length 8 characters

								#define MSG_MAIN                            "Menu principal"

								#define MSG_AUTOSTART                       "Demarrage auto"

								#define MSG_DISABLE_STEPPERS                "Arreter moteurs"

								#define MSG_AUTO_HOME                       "Origine auto."

								#define MSG_AUTO_HOME_X                     "Origine X Auto."

								#define MSG_AUTO_HOME_Y                     "Origine Y Auto."

								#define MSG_AUTO_HOME_Z                     "Origine Z Auto."

								#define MSG_LEVEL_BED_HOMING                "Origine XYZ"

								#define MSG_LEVEL_BED_WAITING               "Clic pour commencer"

								#define MSG_LEVEL_BED_NEXT_POINT            "Point suivant"

								#define MSG_LEVEL_BED_DONE                  "Mise a niveau OK!"

								#define MSG_LEVEL_BED_CANCEL                "Annuler"

								#define MSG_SET_HOME_OFFSETS                "Regl. decal. origine"

								#define MSG_HOME_OFFSETS_APPLIED            "Decalages appliques"

								#define MSG_SET_ORIGIN                      "Regler origine"

								#define MSG_PREHEAT_1                       "Prechauffage PLA"

								#define MSG_PREHEAT_1_N                     "Prechauff. PLA "

								#define MSG_PREHEAT_1_ALL                   "Prech. PLA Tout"

								#define MSG_PREHEAT_1_BEDONLY               "Prech. PLA Plateau"

								#define MSG_PREHEAT_1_SETTINGS              "Regl. prech. PLA"

								#define MSG_PREHEAT_2                       "Prechauffage ABS"

								#define MSG_PREHEAT_2_N                     "Prechauff. ABS "

								#define MSG_PREHEAT_2_ALL                   "Prech. ABS Tout"

								#define MSG_PREHEAT_2_BEDONLY               "Prech. ABS Plateau"

								#define MSG_PREHEAT_2_SETTINGS              "Regl. prech. ABS"

								#define MSG_COOLDOWN                        "Refroidir"

								#define MSG_SWITCH_PS_ON                    "Allumer alim."

								#define MSG_SWITCH_PS_OFF                   "Eteindre alim."

								#define MSG_EXTRUDE                         "Extrusion"

								#define MSG_RETRACT                         "Retraction"

								#define MSG_MOVE_AXIS                       "Deplacer un axe"

								#define MSG_LEVEL_BED                       "Regl. Niv. Plateau"

								#define MSG_MOVE_X                          "Depl. X"

								#define MSG_MOVE_Y                          "Depl. Y"

								#define MSG_MOVE_Z                          "Depl. Z"

								#define MSG_MOVE_E                          "Extruder"

								#define MSG_MOVE_01MM                       "Depl. 0.1mm"

								#define MSG_MOVE_1MM                        "Depl. 1mm"

								#define MSG_MOVE_10MM                       "Depl. 10mm"

								#define MSG_SPEED                           " Vitesse"

								#define MSG_BED_Z                           "Plateau Z"

								#define MSG_NOZZLE                          "Buse"

								#define MSG_BED                             "Plateau"

								#define MSG_FAN_SPEED                       "Vitesse ventil."

								#define MSG_FLOW                            "Flux"

								#define MSG_CONTROL                         "Controler"

								#define MSG_MIN                             LCD_STR_THERMOMETER " Min"

								#define MSG_MAX                             LCD_STR_THERMOMETER " Max"

								#define MSG_FACTOR                          LCD_STR_THERMOMETER " Facteur"

								#define MSG_AUTOTEMP                        "Temp. Auto."

								#define MSG_ON                              "Marche "

								#define MSG_OFF                             "Arret"

								#define MSG_PID_P                           "PID-P"

								#define MSG_PID_I                           "PID-I"

								#define MSG_PID_D                           "PID-D"

								#define MSG_PID_C                           "PID-C"

								#define MSG_SELECT                          "Selectionner"

								#define MSG_ACC                             "Acceleration"

								#define MSG_VX_JERK                         "Vx-jerk"

								#define MSG_VY_JERK                         "Vy-jerk"

								#define MSG_VZ_JERK                         "Vz-jerk"

								#define MSG_VE_JERK                         "Ve-jerk"

								#define MSG_VMAX                            "Vmax"

								#define MSG_VMIN                            "Vmin"

								#define MSG_VTRAV_MIN                       "Vdepl min"

								#define MSG_AMAX                            "Amax "

								#define MSG_A_RETRACT                       "A-retract"

								#define MSG_A_TRAVEL                        "A-Depl."

								#define MSG_XSTEPS                          "Xpas/mm"

								#define MSG_YSTEPS                          "Ypas/mm"

								#define MSG_ZSTEPS                          "Zpas/mm"

								#define MSG_ESTEPS                          "Epas/mm"

								#define MSG_TEMPERATURE                     "Temperature"

								#define MSG_MOTION                          "Mouvement"

								#define MSG_VOLUMETRIC                      "Filament"

								#define MSG_VOLUMETRIC_ENABLED              "E en mm3"

								#define MSG_FILAMENT_DIAM                   "Diam. Fil."

								#define MSG_CONTRAST                        "Contraste LCD"

								#define MSG_STORE_EPROM                     "Sauver config"

								#define MSG_LOAD_EPROM                      "Lire config"

								#define MSG_RESTORE_FAILSAFE                "Restaurer defauts"

								#define MSG_REFRESH                         "Actualiser"

								#define MSG_WATCH                           "Surveiller"

								#define MSG_PREPARE                         "Preparer"

								#define MSG_TUNE                            "Regler"

								#define MSG_PAUSE_PRINT                     "Interrompre impr."

								#define MSG_RESUME_PRINT                    "Reprendre impr."

								#define MSG_STOP_PRINT                      "Arreter impr."

								#define MSG_CARD_MENU                       "Impr. depuis SD"

								#define MSG_NO_CARD                         "Pas de carte"

								#define MSG_DWELL                           "Repos..."

								#define MSG_USERWAIT                        "Atten. de l'util."

								#define MSG_RESUMING                        "Repri. de l'impr."

								#define MSG_PRINT_ABORTED                   "Impr. Annulee"

								#define MSG_NO_MOVE                         "Aucun mouvement."

								#define MSG_KILLED                          "MORT."

								#define MSG_STOPPED                         "STOPPE."

								#define MSG_CONTROL_RETRACT                 "Retraction mm"

								#define MSG_CONTROL_RETRACT_SWAP            "Ech. Retr. mm"

								#define MSG_CONTROL_RETRACTF                "Retraction V"

								#define MSG_CONTROL_RETRACT_ZLIFT           "Hop mm"

								#define MSG_CONTROL_RETRACT_RECOVER         "UnRet +mm"

								#define MSG_CONTROL_RETRACT_RECOVER_SWAP    "Ech. UnRet +mm"

								#define MSG_CONTROL_RETRACT_RECOVERF        "UnRet V"

								#define MSG_AUTORETRACT                     "Retract. Auto."

								#define MSG_FILAMENTCHANGE                  "Changer filament"

								#define MSG_INIT_SDCARD                     "Init. la carte SD"

								#define MSG_CNG_SDCARD                      "Changer de carte"

								#define MSG_ZPROBE_OUT                      "Z sonde exte. lit"

								#define MSG_HOME                            "Origine"  // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST

								#define MSG_FIRST                           "Premier"

								#define MSG_ZPROBE_ZOFFSET                  "Decalage Z"

								#define MSG_BABYSTEP_X                      "Babystep X"

								#define MSG_BABYSTEP_Y                      "Babystep Y"

								#define MSG_BABYSTEP_Z                      "Babystep Z"

								#define MSG_ENDSTOP_ABORT                   "Butee abandon"

								#define MSG_HEATING_FAILED_LCD              "Erreur de chauffe"

								#define MSG_ERR_REDUNDANT_TEMP              "Err: TEMP. REDONDANT"

								#define MSG_THERMAL_RUNAWAY                 "EMBALLEMENT THERM."

								#define MSG_ERR_MAXTEMP                     "Err: TEMP. MAX"

								#define MSG_ERR_MINTEMP                     "Err: TEMP. MIN"

								#define MSG_ERR_MAXTEMP_BED                 "Err: TEMP. MAX LIT"

								#define MSG_ERR_MINTEMP_BED                 "Err: TEMP. MIN LIT"


								#define MSG_HALTED                          "IMPR. STOPPEE"

								#define MSG_PLEASE_RESET                    "RaZ. SVP"

								#define MSG_SHORT_DAY                       "j" // One character only

								#define MSG_SHORT_HOUR                      "h" // One character only

								#define MSG_SHORT_MINUTE                    "m" // One character only


								#define MSG_HEATING                         "En chauffe..."

								#define MSG_HEATING_COMPLETE                "Chauffe terminee"

								#define MSG_BED_HEATING                     "Plateau en chauffe.."

								#define MSG_BED_DONE                        "Chauffe lit terminee"

								#define MSG_DELTA_CALIBRATE                 "Calibration Delta"

								#define MSG_DELTA_CALIBRATE_X               "Calibrer X"

								#define MSG_DELTA_CALIBRATE_Y               "Calibrer Y"

								#define MSG_DELTA_CALIBRATE_Z               "Calibrer Z"

								#define MSG_DELTA_CALIBRATE_CENTER          "Calibrer centre"


								#define MSG_INFO_MENU                       "Infos imprimante"

								#define MSG_INFO_PRINTER_MENU               "Infos imprimante"

								#define MSG_INFO_STATS_MENU                 "Stats. imprimante"

								#define MSG_INFO_BOARD_MENU                 "Infos carte"

								#define MSG_INFO_THERMISTOR_MENU            "Thermistors"

								#define MSG_INFO_EXTRUDERS                  "Extruders"

								#define MSG_INFO_BAUDRATE                   "Baud"

								#define MSG_INFO_PROTOCOL                   "Protocole"


								#if LCD_WIDTH > 19

								  #define MSG_INFO_PRINT_COUNT              "Nbre impressions"

								  #define MSG_INFO_COMPLETED_PRINTS         "Terminees"

								  #define MSG_INFO_PRINT_TIME               "Tps impr. total"

								  #define MSG_INFO_PRINT_LONGEST            "Impr. la + longue"

								  #define MSG_INFO_PRINT_FILAMENT           "Total filament"

								#else

								    #define MSG_INFO_PRINT_COUNT              "Impressions"

								    #define MSG_INFO_COMPLETED_PRINTS         "Terminees"

								    #define MSG_INFO_PRINT_TIME               "Total"

								    #define MSG_INFO_PRINT_LONGEST            "+ long"

								    #define MSG_INFO_PRINT_FILAMENT           "Filament"

								#endif


								#define MSG_INFO_MIN_TEMP                   "Temp Min"

								#define MSG_INFO_MAX_TEMP                   "Temp Max"

								#define MSG_INFO_PSU                        "Alimentation"


								#define MSG_FILAMENT_CHANGE_HEADER          "CHANGER FILAMENT"

								#define MSG_FILAMENT_CHANGE_OPTION_HEADER   "CHANGER OPTIONS:"

								#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  "+ extrusion"

								#define MSG_FILAMENT_CHANGE_OPTION_RESUME   "Reprendre impr."


								#if LCD_HEIGHT >= 4

								    #define MSG_FILAMENT_CHANGE_INIT_1          "Attente Demarrage"

								    #define MSG_FILAMENT_CHANGE_INIT_2          "du filament"

								    #define MSG_FILAMENT_CHANGE_INIT_3          "changer"

								    #define MSG_FILAMENT_CHANGE_UNLOAD_1        "attente de"

								    #define MSG_FILAMENT_CHANGE_UNLOAD_2        "decharger filament"

								    #define MSG_FILAMENT_CHANGE_UNLOAD_3        ""

								    #define MSG_FILAMENT_CHANGE_INSERT_1        "inserer filament"

								    #define MSG_FILAMENT_CHANGE_INSERT_2        "et app. bouton"

								    #define MSG_FILAMENT_CHANGE_INSERT_3        "pour continuer..."

								    #define MSG_FILAMENT_CHANGE_LOAD_1          "attente de"

								    #define MSG_FILAMENT_CHANGE_LOAD_2          "charger filament"

								    #define MSG_FILAMENT_CHANGE_LOAD_3          ""

								    #define MSG_FILAMENT_CHANGE_EXTRUDE_1       "attente de"

								    #define MSG_FILAMENT_CHANGE_EXTRUDE_2       "extrusion fil."

								    #define MSG_FILAMENT_CHANGE_EXTRUDE_3       ""

								    #define MSG_FILAMENT_CHANGE_RESUME_1        "attente impression"

								    #define MSG_FILAMENT_CHANGE_RESUME_2        "pour reprendre"

								    #define MSG_FILAMENT_CHANGE_RESUME_3        ""

								#else // LCD_HEIGHT < 4

								    #define MSG_FILAMENT_CHANGE_INIT_1          "Patientez..."

								    #define MSG_FILAMENT_CHANGE_UNLOAD_1        "Ejection..."

								    #define MSG_FILAMENT_CHANGE_INSERT_1        "Inserer et click"

								    #define MSG_FILAMENT_CHANGE_LOAD_1          "Chargement..."

								    #define MSG_FILAMENT_CHANGE_EXTRUDE_1       "Extrusion..."

								    #define MSG_FILAMENT_CHANGE_RESUME_1        "Reprise..."

								#endif // LCD_HEIGHT < 4


								#endif // LANGUAGE_FR_H