You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
173 lines
9.5 KiB
173 lines
9.5 KiB
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
#pragma once
|
|
|
|
constexpr uint8_t DGUS_LINE_LEN = 32;
|
|
constexpr uint8_t DGUS_STATUS_LEN = 32;
|
|
constexpr uint8_t DGUS_FILE_COUNT = 5;
|
|
constexpr uint8_t DGUS_FILENAME_LEN = 32;
|
|
constexpr uint8_t DGUS_ELLAPSED_LEN = 15;
|
|
constexpr uint8_t DGUS_LEVEL_GRID_SIZE = 25;
|
|
constexpr uint8_t DGUS_MACHINE_LEN = 24;
|
|
constexpr uint8_t DGUS_BUILDVOLUME_LEN = 24;
|
|
constexpr uint8_t DGUS_VERSION_LEN = 16;
|
|
constexpr uint8_t DGUS_PRINTTIME_LEN = 24;
|
|
constexpr uint8_t DGUS_LONGESTPRINT_LEN = 24;
|
|
constexpr uint8_t DGUS_FILAMENTUSED_LEN = 24;
|
|
constexpr uint8_t DGUS_GCODE_LEN = 32;
|
|
|
|
enum class DGUS_Addr : uint16_t {
|
|
MESSAGE_Line1 = 0x1100, // 0x1100 - 0x111F
|
|
MESSAGE_Line2 = 0x1120, // 0x1120 - 0x113F
|
|
MESSAGE_Line3 = 0x1140, // 0x1140 - 0x115F
|
|
MESSAGE_Line4 = 0x1160, // 0x1160 - 0x117F
|
|
|
|
// READ-ONLY VARIABLES
|
|
|
|
SCREENCHANGE = 0x2000, // Screen change request. Data contains target screen in low byte.
|
|
SCREENCHANGE_SD = 0x2001, // Only change if SD card present.
|
|
SCREENCHANGE_Idle = 0x2002, // Only change if not printing.
|
|
SCREENCHANGE_Printing = 0x2003, // Only change if printing.
|
|
SD_SelectFile = 0x2004, // Data: file index (0-4)
|
|
SD_Scroll = 0x2005, // Data: DGUS_Data::Scroll
|
|
SD_Print = 0x2006,
|
|
STATUS_Abort = 0x2007, // Popup / Data: DGUS_Data::Popup
|
|
STATUS_Pause = 0x2008, // Popup / Data: DGUS_Data::Popup
|
|
STATUS_Resume = 0x2009, // Popup / Data: DGUS_Data::Popup
|
|
ADJUST_SetFeedrate = 0x200A, // Type: Integer (16 bits signed)
|
|
ADJUST_SetFlowrate_CUR = 0x200B, // Type: Integer (16 bits signed)
|
|
#if HAS_MULTI_EXTRUDER
|
|
ADJUST_SetFlowrate_E0 = 0x200C, // Type: Integer (16 bits signed)
|
|
ADJUST_SetFlowrate_E1 = 0x200D, // Type: Integer (16 bits signed)
|
|
#endif
|
|
ADJUST_SetBabystep = 0x200E, // Type: Fixed point, 2 decimals (16 bits signed)
|
|
ADJUST_Babystep = 0x200F, // Data: DGUS_Data::Adjust
|
|
TEMP_Preset = 0x2010, // Popup / Data: DGUS_Data::TempPreset
|
|
TEMP_SetTarget_Bed = 0x2011, // Type: Integer (16 bits signed)
|
|
TEMP_SetTarget_H0 = 0x2012, // Type: Integer (16 bits signed)
|
|
#if HAS_MULTI_HOTEND
|
|
TEMP_SetTarget_H1 = 0x2013, // Type: Integer (16 bits signed)
|
|
#endif
|
|
TEMP_Cool = 0x2014, // Data: DGUS_Data::Heater
|
|
STEPPER_Control = 0x2015, // Popup / Data: DGUS_Data::Control
|
|
LEVEL_OFFSET_Set = 0x2016, // Type: Fixed point, 2 decimals (16 bits signed)
|
|
LEVEL_OFFSET_Step = 0x2017, // Data: DGUS_Data::Adjust
|
|
LEVEL_OFFSET_SetStep = 0x2018, // Data: DGUS_Data::StepSize
|
|
LEVEL_MANUAL_Point = 0x2019, // Data: point index (1-5)
|
|
LEVEL_AUTO_Probe = 0x201A,
|
|
LEVEL_AUTO_Disable = 0x201B,
|
|
FILAMENT_Select = 0x201C, // Data: DGUS_Data::Extruder
|
|
FILAMENT_SetLength = 0x201D, // Type: Integer (16 bits unsigned)
|
|
FILAMENT_Move = 0x201E, // Data: DGUS_Data::FilamentMove
|
|
MOVE_Home = 0x201F, // Data: DGUS_Data::Axis
|
|
MOVE_SetX = 0x2020, // Type: Fixed point, 1 decimal (16 bits signed)
|
|
MOVE_SetY = 0x2021, // Type: Fixed point, 1 decimal (16 bits signed)
|
|
MOVE_SetZ = 0x2022, // Type: Fixed point, 1 decimal (16 bits signed)
|
|
MOVE_Step = 0x2023, // Data: DGUS_Data::MoveDirection
|
|
MOVE_SetStep = 0x2024, // Data: DGUS_Data::StepSize
|
|
GCODE_Clear = 0x2025,
|
|
GCODE_Execute = 0x2026,
|
|
EEPROM_Reset = 0x2027, // Popup / Data: DGUS_Data::Popup
|
|
SETTINGS2_Extra = 0x2028, // Data: DGUS_Data::Extra
|
|
PID_Select = 0x2029, // Data: DGUS_Data::Heater
|
|
PID_SetTemp = 0x202A, // Type: Integer (16 bits unsigned)
|
|
PID_Run = 0x202B,
|
|
POWERLOSS_Abort = 0x202C, // Popup / Data: DGUS_Data::Popup
|
|
POWERLOSS_Resume = 0x202D, // Popup / Data: DGUS_Data::Popup
|
|
WAIT_Abort = 0x202E, // Popup / Data: DGUS_Data::Popup
|
|
WAIT_Continue = 0x202F,
|
|
|
|
// WRITE-ONLY VARIABLES
|
|
|
|
MESSAGE_Status = 0x3000, // 0x3000 - 0x301F
|
|
SD_Type = 0x3020, // 0x3020 - 0x3024 / Data: DGUS_Data::SDType
|
|
SD_FileName0 = 0x3025, // 0x3025 - 0x3044
|
|
SD_FileName1 = 0x3045, // 0x3045 - 0x3064
|
|
SD_FileName2 = 0x3065, // 0x3065 - 0x3084
|
|
SD_FileName3 = 0x3085, // 0x3085 - 0x30A4
|
|
SD_FileName4 = 0x30A5, // 0x30A5 - 0x30C4
|
|
SD_ScrollIcons = 0x30C5, // Bits: DGUS_Data::ScrollIcon
|
|
SD_SelectedFileName = 0x30C6, // 0x30C6 - 0x30E5
|
|
STATUS_PositionZ = 0x30E6, // Type: Fixed point, 1 decimal (16 bits signed)
|
|
STATUS_Ellapsed = 0x30E7, // 0x30E7 - 0x30F5
|
|
STATUS_Percent = 0x30F6, // Type: Integer (16 bits unsigned)
|
|
STATUS_Icons = 0x30F7, // Bits: DGUS_Data::StatusIcon
|
|
ADJUST_Feedrate = 0x30F8, // Type: Integer (16 bits signed)
|
|
ADJUST_Flowrate_CUR = 0x30F9, // Type: Integer (16 bits signed)
|
|
#if HAS_MULTI_EXTRUDER
|
|
ADJUST_Flowrate_E0 = 0x30FA, // Type: Integer (16 bits signed)
|
|
ADJUST_Flowrate_E1 = 0x30FB, // Type: Integer (16 bits signed)
|
|
#endif
|
|
TEMP_Current_Bed = 0x30FC, // Type: Integer (16 bits signed)
|
|
TEMP_Target_Bed = 0x30FD, // Type: Integer (16 bits signed)
|
|
TEMP_Max_Bed = 0x30FE, // Type: Integer (16 bits unsigned)
|
|
TEMP_Current_H0 = 0x30FF, // Type: Integer (16 bits signed)
|
|
TEMP_Target_H0 = 0x3100, // Type: Integer (16 bits signed)
|
|
TEMP_Max_H0 = 0x3101, // Type: Integer (16 bits unsigned)
|
|
#if HAS_MULTI_HOTEND
|
|
TEMP_Current_H1 = 0x3102, // Type: Integer (16 bits signed)
|
|
TEMP_Target_H1 = 0x3103, // Type: Integer (16 bits signed)
|
|
TEMP_Max_H1 = 0x3104, // Type: Integer (16 bits unsigned)
|
|
#endif
|
|
STEPPER_Status = 0x3105, // Data: DGUS_Data::Status
|
|
LEVEL_OFFSET_Current = 0x3106, // Type: Fixed point, 2 decimals (16 bits signed)
|
|
LEVEL_OFFSET_StepIcons = 0x3107, // Bits: DGUS_Data::StepIcon
|
|
LEVEL_AUTO_DisableIcon = 0x3108, // Data: DGUS_Data::Status
|
|
LEVEL_AUTO_Grid = 0x3109, // 0x3109 - 0x3121 / Type: Fixed point, 3 decimals (16 bits signed)
|
|
LEVEL_PROBING_Icons1 = 0x3122, // Type: Integer (16 bits unsigned) / Each bit represents a grid point
|
|
LEVEL_PROBING_Icons2 = 0x3123, // Type: Integer (16 bits unsigned) / Each bit represents a grid point
|
|
FILAMENT_ExtruderIcons = 0x3124, // Data: DGUS_Data::ExtruderIcon
|
|
FILAMENT_Length = 0x3125, // Type: Integer (16 bits unsigned)
|
|
MOVE_CurrentX = 0x3126, // Type: Fixed point, 1 decimal (16 bits signed)
|
|
MOVE_CurrentY = 0x3127, // Type: Fixed point, 1 decimal (16 bits signed)
|
|
MOVE_CurrentZ = 0x3128, // Type: Fixed point, 1 decimal (16 bits signed)
|
|
MOVE_StepIcons = 0x3129, // Bits: DGUS_Data::StepIcon
|
|
SETTINGS2_BLTouch = 0x312A, // Data: DGUS_Data::Status
|
|
PID_HeaterIcons = 0x312B, // Data: DGUS_Data::HeaterIcon
|
|
PID_Temp = 0x312C, // Type: Integer (16 bits unsigned)
|
|
PID_Kp = 0x312D, // Type: Fixed point, 2 decimals (32 bits signed)
|
|
PID_Ki = 0x312F, // Type: Fixed point, 2 decimals (32 bits signed)
|
|
PID_Kd = 0x3131, // Type: Fixed point, 2 decimals (32 bits signed)
|
|
INFOS_Machine = 0x3133, // 0x3133 - 0x314A
|
|
INFOS_BuildVolume = 0x314B, // 0x314B - 0x3162
|
|
INFOS_Version = 0x3163, // 0x3163 - 0x3172
|
|
INFOS_TotalPrints = 0x3173, // Type: Integer (16 bits unsigned)
|
|
INFOS_FinishedPrints = 0x3174, // Type: Integer (16 bits unsigned)
|
|
INFOS_PrintTime = 0x3175, // 0x3175 - 0x318C
|
|
INFOS_LongestPrint = 0x318D, // 0x318D - 0x31A4
|
|
INFOS_FilamentUsed = 0x31A5, // 0x31A5 - 0x31BC
|
|
WAIT_Icons = 0x31BD, // Bits: DGUS_Data::WaitIcon
|
|
|
|
// READ-WRITE VARIABLES
|
|
|
|
FAN0_Speed = 0x4000, // Type: Integer (16 bits unsigned) / Data: fan speed as percent (0-100)
|
|
GCODE_Data = 0x4001, // 0x4001 - 0x4020
|
|
PID_Cycles = 0x4021, // Type: Integer (16 bits unsigned)
|
|
VOLUME_Level = 0x4022, // Type: Integer (16 bits unsigned) / Data: volume as percent (0-100)
|
|
BRIGHTNESS_Level = 0x4023, // Type: Integer (16 bits unsigned) / Data: brightness as percent (0-100)
|
|
|
|
// SPECIAL CASES
|
|
|
|
STATUS_Percent_Complete = 0x5000, // Same as STATUS_Percent, but always 100%
|
|
INFOS_Debug = 0x5001,
|
|
|
|
};
|
|
|