You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
2705 lines
114 KiB
2705 lines
114 KiB
#ifndef LANGUAGE_H
|
|
#define LANGUAGE_H
|
|
|
|
// NOTE: IF YOU CHANGE THIS FILE / MERGE THIS FILE WITH CHANGES
|
|
//
|
|
// ==> ALWAYS TRY TO COMPILE MARLIN WITH/WITHOUT "ULTIPANEL" / "ULTRALCD" / "SDSUPPORT" #define IN "Configuration.h"
|
|
// ==> ALSO TRY ALL AVAILABLE "LANGUAGE_CHOICE" OPTIONS
|
|
|
|
// Languages
|
|
// 1 English
|
|
// 2 Polish
|
|
// 3 French
|
|
// 4 German
|
|
// 5 Spanish
|
|
// 6 Russian
|
|
// 7 Italian
|
|
// 8 Portuguese
|
|
// 9 Finnish
|
|
// 10 Aragonese
|
|
// 11 Dutch
|
|
// 12 Catalan
|
|
// 13 Basque-Euskera
|
|
|
|
#ifndef LANGUAGE_CHOICE
|
|
#define LANGUAGE_CHOICE 1 // Pick your language from the list above
|
|
#endif
|
|
|
|
#define PROTOCOL_VERSION "1.0"
|
|
|
|
#if MOTHERBOARD == 7 || MOTHERBOARD == 71 || MOTHERBOARD == 72
|
|
#define MACHINE_NAME "Ultimaker"
|
|
#define FIRMWARE_URL "http://firmware.ultimaker.com"
|
|
#elif MOTHERBOARD == 80
|
|
#define MACHINE_NAME "Rumba"
|
|
#define FIRMWARE_URL "https://github.com/ErikZalm/Marlin/"
|
|
#elif MOTHERBOARD == 77
|
|
#define MACHINE_NAME "3Drag"
|
|
#define FIRMWARE_URL "http://3dprint.elettronicain.it/"
|
|
#elif MOTHERBOARD == 88
|
|
#define MACHINE_NAME "Makibox"
|
|
#define FIRMWARE_URL "https://github.com/ErikZalm/Marlin/"
|
|
#else
|
|
#ifdef CUSTOM_MENDEL_NAME
|
|
#define MACHINE_NAME CUSTOM_MENDEL_NAME
|
|
#else
|
|
#define MACHINE_NAME "Mendel"
|
|
#endif
|
|
|
|
// Default firmware set to Mendel
|
|
#define FIRMWARE_URL "https://github.com/ErikZalm/Marlin/"
|
|
#endif
|
|
|
|
|
|
#ifndef MACHINE_UUID
|
|
#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
|
|
#endif
|
|
|
|
|
|
#define STRINGIFY_(n) #n
|
|
#define STRINGIFY(n) STRINGIFY_(n)
|
|
|
|
|
|
// Common LCD messages
|
|
/* nothing here as of yet */
|
|
|
|
// Common serial messages
|
|
#define MSG_MARLIN "Marlin"
|
|
|
|
|
|
|
|
#if LANGUAGE_CHOICE == 1
|
|
|
|
// LCD Menu Messages
|
|
// Please note these are limited to 17 characters!
|
|
|
|
#define WELCOME_MSG MACHINE_NAME " ready."
|
|
#define MSG_SD_INSERTED "Card inserted"
|
|
#define MSG_SD_REMOVED "Card removed"
|
|
#define MSG_MAIN "Main"
|
|
#define MSG_AUTOSTART "Autostart"
|
|
#define MSG_DISABLE_STEPPERS "Disable steppers"
|
|
#define MSG_AUTO_HOME "Auto home"
|
|
#define MSG_SET_ORIGIN "Set origin"
|
|
#define MSG_PREHEAT_PLA "Preheat PLA"
|
|
#define MSG_PREHEAT_PLA0 "Preheat PLA 1"
|
|
#define MSG_PREHEAT_PLA1 "Preheat PLA 2"
|
|
#define MSG_PREHEAT_PLA2 "Preheat PLA 3"
|
|
#define MSG_PREHEAT_PLA012 "Preheat PLA All"
|
|
#define MSG_PREHEAT_PLA_BEDONLY "Preheat PLA Bed"
|
|
#define MSG_PREHEAT_PLA_SETTINGS "Preheat PLA conf"
|
|
#define MSG_PREHEAT_ABS "Preheat ABS"
|
|
#define MSG_PREHEAT_ABS0 "Preheat ABS 1"
|
|
#define MSG_PREHEAT_ABS1 "Preheat ABS 2"
|
|
#define MSG_PREHEAT_ABS2 "Preheat ABS 3"
|
|
#define MSG_PREHEAT_ABS012 "Preheat ABS All"
|
|
#define MSG_PREHEAT_ABS_BEDONLY "Preheat ABS Bed"
|
|
#define MSG_PREHEAT_ABS_SETTINGS "Preheat ABS conf"
|
|
#define MSG_COOLDOWN "Cooldown"
|
|
#define MSG_SWITCH_PS_ON "Switch power on"
|
|
#define MSG_SWITCH_PS_OFF "Switch power off"
|
|
#define MSG_EXTRUDE "Extrude"
|
|
#define MSG_RETRACT "Retract"
|
|
#define MSG_MOVE_AXIS "Move axis"
|
|
#define MSG_MOVE_X "Move X"
|
|
#define MSG_MOVE_Y "Move Y"
|
|
#define MSG_MOVE_Z "Move Z"
|
|
#define MSG_MOVE_E "Extruder"
|
|
#define MSG_MOVE_E1 "Extruder2"
|
|
#define MSG_MOVE_E2 "Extruder3"
|
|
#define MSG_MOVE_01MM "Move 0.1mm"
|
|
#define MSG_MOVE_1MM "Move 1mm"
|
|
#define MSG_MOVE_10MM "Move 10mm"
|
|
#define MSG_SPEED "Speed"
|
|
#define MSG_NOZZLE "Nozzle"
|
|
#define MSG_NOZZLE1 "Nozzle2"
|
|
#define MSG_NOZZLE2 "Nozzle3"
|
|
#define MSG_BED "Bed"
|
|
#define MSG_FAN_SPEED "Fan speed"
|
|
#define MSG_FLOW "Flow"
|
|
#define MSG_FLOW0 "Flow 0"
|
|
#define MSG_FLOW1 "Flow 1"
|
|
#define MSG_FLOW2 "Flow 2"
|
|
#define MSG_CONTROL "Control"
|
|
#define MSG_MIN " \002 Min"
|
|
#define MSG_MAX " \002 Max"
|
|
#define MSG_FACTOR " \002 Fact"
|
|
#define MSG_AUTOTEMP "Autotemp"
|
|
#define MSG_ON "On "
|
|
#define MSG_OFF "Off"
|
|
#define MSG_PID_P "PID-P"
|
|
#define MSG_PID_I "PID-I"
|
|
#define MSG_PID_D "PID-D"
|
|
#define MSG_PID_C "PID-C"
|
|
#define MSG_ACC "Accel"
|
|
#define MSG_VXY_JERK "Vxy-jerk"
|
|
#define MSG_VZ_JERK "Vz-jerk"
|
|
#define MSG_VE_JERK "Ve-jerk"
|
|
#define MSG_VMAX "Vmax "
|
|
#define MSG_X "x"
|
|
#define MSG_Y "y"
|
|
#define MSG_Z "z"
|
|
#define MSG_E "e"
|
|
#define MSG_VMIN "Vmin"
|
|
#define MSG_VTRAV_MIN "VTrav min"
|
|
#define MSG_AMAX "Amax "
|
|
#define MSG_A_RETRACT "A-retract"
|
|
#define MSG_XSTEPS "Xsteps/mm"
|
|
#define MSG_YSTEPS "Ysteps/mm"
|
|
#define MSG_ZSTEPS "Zsteps/mm"
|
|
#define MSG_ESTEPS "Esteps/mm"
|
|
#define MSG_RECTRACT "Rectract"
|
|
#define MSG_TEMPERATURE "Temperature"
|
|
#define MSG_MOTION "Motion"
|
|
#define MSG_CONTRAST "LCD contrast"
|
|
#define MSG_STORE_EPROM "Store memory"
|
|
#define MSG_LOAD_EPROM "Load memory"
|
|
#define MSG_RESTORE_FAILSAFE "Restore failsafe"
|
|
#define MSG_REFRESH "Refresh"
|
|
#define MSG_WATCH "Info screen"
|
|
#define MSG_PREPARE "Prepare"
|
|
#define MSG_TUNE "Tune"
|
|
#define MSG_PAUSE_PRINT "Pause print"
|
|
#define MSG_RESUME_PRINT "Resume print"
|
|
#define MSG_STOP_PRINT "Stop print"
|
|
#define MSG_CARD_MENU "Print from SD"
|
|
#define MSG_NO_CARD "No SD card"
|
|
#define MSG_DWELL "Sleep..."
|
|
#define MSG_USERWAIT "Wait for user..."
|
|
#define MSG_RESUMING "Resuming print"
|
|
#define MSG_NO_MOVE "No move."
|
|
#define MSG_KILLED "KILLED. "
|
|
#define MSG_STOPPED "STOPPED. "
|
|
#define MSG_CONTROL_RETRACT "Retract mm"
|
|
#define MSG_CONTROL_RETRACT_SWAP "Swap Re.mm"
|
|
#define MSG_CONTROL_RETRACTF "Retract V"
|
|
#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "S UnRet+mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"
|
|
#define MSG_AUTORETRACT "AutoRetr."
|
|
#define MSG_FILAMENTCHANGE "Change filament"
|
|
#define MSG_INIT_SDCARD "Init. SD card"
|
|
#define MSG_CNG_SDCARD "Change SD card"
|
|
#define MSG_ZPROBE_OUT "Z probe out. bed"
|
|
#define MSG_POSITION_UNKNOWN "Home X/Y before Z"
|
|
#define MSG_ZPROBE_ZOFFSET "Z Offset"
|
|
#define MSG_BABYSTEP_X "Babystep X"
|
|
#define MSG_BABYSTEP_Y "Babystep Y"
|
|
#define MSG_BABYSTEP_Z "Babystep Z"
|
|
#define MSG_ENDSTOP_ABORT "Endstop abort"
|
|
|
|
// Serial Console Messages
|
|
|
|
#define MSG_Enqueing "enqueing \""
|
|
#define MSG_POWERUP "PowerUp"
|
|
#define MSG_EXTERNAL_RESET " External Reset"
|
|
#define MSG_BROWNOUT_RESET " Brown out Reset"
|
|
#define MSG_WATCHDOG_RESET " Watchdog Reset"
|
|
#define MSG_SOFTWARE_RESET " Software Reset"
|
|
#define MSG_AUTHOR " | Author: "
|
|
#define MSG_CONFIGURATION_VER " Last Updated: "
|
|
#define MSG_FREE_MEMORY " Free Memory: "
|
|
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
|
|
#define MSG_OK "ok"
|
|
#define MSG_FILE_SAVED "Done saving file."
|
|
#define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line: "
|
|
#define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: "
|
|
#define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: "
|
|
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line: "
|
|
#define MSG_FILE_PRINTED "Done printing file"
|
|
#define MSG_BEGIN_FILE_LIST "Begin file list"
|
|
#define MSG_END_FILE_LIST "End file list"
|
|
#define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
|
|
#define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
|
|
#define MSG_M200_INVALID_EXTRUDER "M200 Invalid extruder "
|
|
#define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder "
|
|
#define MSG_M221_INVALID_EXTRUDER "M221 Invalid extruder "
|
|
#define MSG_ERR_NO_THERMISTORS "No thermistors - no temperature"
|
|
#define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
|
|
#define MSG_HEATING "Heating..."
|
|
#define MSG_HEATING_COMPLETE "Heating done."
|
|
#define MSG_BED_HEATING "Bed Heating."
|
|
#define MSG_BED_DONE "Bed done."
|
|
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
|
|
#define MSG_COUNT_X " Count X: "
|
|
#define MSG_ERR_KILLED "Printer halted. kill() called!"
|
|
#define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
|
|
#define MSG_RESEND "Resend: "
|
|
#define MSG_UNKNOWN_COMMAND "Unknown command: \""
|
|
#define MSG_ACTIVE_EXTRUDER "Active Extruder: "
|
|
#define MSG_INVALID_EXTRUDER "Invalid extruder"
|
|
#define MSG_X_MIN "x_min: "
|
|
#define MSG_X_MAX "x_max: "
|
|
#define MSG_Y_MIN "y_min: "
|
|
#define MSG_Y_MAX "y_max: "
|
|
#define MSG_Z_MIN "z_min: "
|
|
#define MSG_Z_MAX "z_max: "
|
|
#define MSG_M119_REPORT "Reporting endstop status"
|
|
#define MSG_ENDSTOP_HIT "TRIGGERED"
|
|
#define MSG_ENDSTOP_OPEN "open"
|
|
#define MSG_HOTEND_OFFSET "Hotend offsets:"
|
|
|
|
#define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
|
|
#define MSG_SD_INIT_FAIL "SD init fail"
|
|
#define MSG_SD_VOL_INIT_FAIL "volume.init failed"
|
|
#define MSG_SD_OPENROOT_FAIL "openRoot failed"
|
|
#define MSG_SD_CARD_OK "SD card ok"
|
|
#define MSG_SD_WORKDIR_FAIL "workDir open failed"
|
|
#define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
|
|
#define MSG_SD_FILE_OPENED "File opened: "
|
|
#define MSG_SD_SIZE " Size: "
|
|
#define MSG_SD_FILE_SELECTED "File selected"
|
|
#define MSG_SD_WRITE_TO_FILE "Writing to file: "
|
|
#define MSG_SD_PRINTING_BYTE "SD printing byte "
|
|
#define MSG_SD_NOT_PRINTING "Not SD printing"
|
|
#define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
|
|
#define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: "
|
|
|
|
#define MSG_STEPPER_TOO_HIGH "Steprate too high: "
|
|
#define MSG_ENDSTOPS_HIT "endstops hit: "
|
|
#define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
|
|
#define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"
|
|
#define MSG_BABYSTEPPING_X "Babystepping X"
|
|
#define MSG_BABYSTEPPING_Y "Babystepping Y"
|
|
#define MSG_BABYSTEPPING_Z "Babystepping Z"
|
|
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
|
|
|
|
#endif
|
|
|
|
|
|
#if LANGUAGE_CHOICE == 2
|
|
|
|
// LCD Menu Messages
|
|
// Please note these are limited to 17 characters!
|
|
|
|
#define WELCOME_MSG MACHINE_NAME " gotowy."
|
|
#define MSG_SD_INSERTED "Karta wlozona"
|
|
#define MSG_SD_REMOVED "Karta usunieta"
|
|
#define MSG_MAIN "Menu glowne"
|
|
#define MSG_AUTOSTART "Autostart"
|
|
#define MSG_DISABLE_STEPPERS "Wylacz silniki"
|
|
#define MSG_AUTO_HOME "Auto. poz. zerowa"
|
|
#define MSG_SET_ORIGIN "Ustaw punkt zero"
|
|
#define MSG_PREHEAT_PLA "Rozgrzej PLA"
|
|
#define MSG_PREHEAT_PLA0 "Rozgrzej PLA 1"
|
|
#define MSG_PREHEAT_PLA1 "Rozgrzej PLA 2"
|
|
#define MSG_PREHEAT_PLA2 "Rozgrzej PLA 3"
|
|
#define MSG_PREHEAT_PLA012 "Roz. PLA Wszystko"
|
|
#define MSG_PREHEAT_PLA_BEDONLY "Rozgrzej PLA Loze"
|
|
#define MSG_PREHEAT_PLA_SETTINGS "Ustaw. rozg. PLA"
|
|
#define MSG_PREHEAT_ABS "Rozgrzej ABS"
|
|
#define MSG_PREHEAT_ABS0 "Rozgrzej ABS 1"
|
|
#define MSG_PREHEAT_ABS1 "Rozgrzej ABS 2"
|
|
#define MSG_PREHEAT_ABS2 "Rozgrzej ABS 3"
|
|
#define MSG_PREHEAT_ABS012 "Roz. ABS Wszystko"
|
|
#define MSG_PREHEAT_ABS_BEDONLY "Rozgrzej ABS Loze"
|
|
#define MSG_PREHEAT_ABS_SETTINGS "Ustaw. rozg. ABS"
|
|
#define MSG_COOLDOWN "Chlodzenie"
|
|
#define MSG_SWITCH_PS_ON "Wlacz zasilacz"
|
|
#define MSG_SWITCH_PS_OFF "Wylacz zasilacz"
|
|
#define MSG_EXTRUDE "Ekstruzja"
|
|
#define MSG_RETRACT "Cofanie"
|
|
#define MSG_MOVE_AXIS "Ruch osi"
|
|
#define MSG_MOVE_X "Przesun w X"
|
|
#define MSG_MOVE_Y "Przesun w Y"
|
|
#define MSG_MOVE_Z "Przesun w Z"
|
|
#define MSG_MOVE_E "Ekstruzja (os E)"
|
|
#define MSG_MOVE_E1 "Extruder2"
|
|
#define MSG_MOVE_E2 "Extruder3"
|
|
#define MSG_MOVE_01MM "Przesuwaj co .1mm"
|
|
#define MSG_MOVE_1MM "Przesuwaj co 1mm"
|
|
#define MSG_MOVE_10MM "Przesuwaj co 10mm"
|
|
#define MSG_SPEED "Predkosc"
|
|
#define MSG_NOZZLE "Dysza"
|
|
#define MSG_NOZZLE1 "Dysza 2"
|
|
#define MSG_NOZZLE2 "Dysza 3"
|
|
#define MSG_BED "Loze"
|
|
#define MSG_FAN_SPEED "Obroty wiatraka"
|
|
#define MSG_FLOW "Przeplyw"
|
|
#define MSG_FLOW0 "Przeplyw 0"
|
|
#define MSG_FLOW1 "Przeplyw 1"
|
|
#define MSG_FLOW2 "Przeplyw 2"
|
|
#define MSG_CONTROL "Kontrola"
|
|
#define MSG_MIN " \002 Min"
|
|
#define MSG_MAX " \002 Max"
|
|
#define MSG_FACTOR " \002 Mnoznik"
|
|
#define MSG_AUTOTEMP "Auto. temperatura"
|
|
#define MSG_ON "Wl. "
|
|
#define MSG_OFF "Wyl."
|
|
#define MSG_PID_P "PID-P"
|
|
#define MSG_PID_I "PID-I"
|
|
#define MSG_PID_D "PID-D"
|
|
#define MSG_PID_C "PID-C"
|
|
#define MSG_ACC "Przyspieszenie"
|
|
#define MSG_VXY_JERK "Zryw Vxy"
|
|
#define MSG_VZ_JERK "Zryw Vz"
|
|
#define MSG_VE_JERK "Zryw Ve"
|
|
#define MSG_VMAX "Vmax"
|
|
#define MSG_X "x"
|
|
#define MSG_Y "y"
|
|
#define MSG_Z "z"
|
|
#define MSG_E "e"
|
|
#define MSG_VMIN "Vmin"
|
|
#define MSG_VTRAV_MIN "Vskok min"
|
|
#define MSG_AMAX "Amax"
|
|
#define MSG_A_RETRACT "A-wycofanie"
|
|
#define MSG_XSTEPS "krokiX/mm"
|
|
#define MSG_YSTEPS "krokiY/mm"
|
|
#define MSG_ZSTEPS "krokiZ/mm"
|
|
#define MSG_ESTEPS "krokiE/mm"
|
|
#define MSG_RECTRACT "Wycofanie"
|
|
#define MSG_TEMPERATURE "Temperatura"
|
|
#define MSG_MOTION "Ruch"
|
|
#define MSG_CONTRAST "Kontrast LCD"
|
|
#define MSG_STORE_EPROM "Zapisz w pamieci"
|
|
#define MSG_LOAD_EPROM "Wczytaj z pamieci"
|
|
#define MSG_RESTORE_FAILSAFE "Ustaw. fabryczne"
|
|
#define MSG_REFRESH "\004Odswiez"
|
|
#define MSG_WATCH "Ekran glowny"
|
|
#define MSG_PREPARE "Przygotuj"
|
|
#define MSG_CONTROL "Ustawienia"
|
|
#define MSG_TUNE "Strojenie"
|
|
#define MSG_PAUSE_PRINT "Pauza"
|
|
#define MSG_RESUME_PRINT "Wznowienie"
|
|
#define MSG_STOP_PRINT "Stop"
|
|
#define MSG_CARD_MENU "Menu karty SD"
|
|
#define MSG_NO_CARD "Brak karty"
|
|
#define MSG_DWELL "Uspij..."
|
|
#define MSG_USERWAIT "Oczekiwanie..."
|
|
#define MSG_RESUMING "Wznawianie druku"
|
|
#define MSG_NO_MOVE "Brak ruchu"
|
|
#define MSG_KILLED "Ubity. "
|
|
#define MSG_STOPPED "Zatrzymany. "
|
|
#define MSG_STEPPER_RELEASED "Zwolniony."
|
|
#define MSG_CONTROL_RETRACT "Wycofaj mm"
|
|
#define MSG_CONTROL_RETRACT_SWAP "Z Wycof. mm"
|
|
#define MSG_CONTROL_RETRACTF "Wycofaj V"
|
|
#define MSG_CONTROL_RETRACT_ZLIFT "Skok Z mm:"
|
|
#define MSG_CONTROL_RETRACT_RECOVER "Cof. wycof. +mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Z Cof. wyc. +mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVERF "Cof. wycof. V"
|
|
#define MSG_AUTORETRACT "Auto. wycofanie"
|
|
#define MSG_FILAMENTCHANGE "Zmien filament"
|
|
#define MSG_INIT_SDCARD "Inicjal. karty SD"
|
|
#define MSG_CNG_SDCARD "Zmiana karty SD"
|
|
#define MSG_ZPROBE_OUT "Sonda Z za lozem"
|
|
#define MSG_POSITION_UNKNOWN "Wroc w XY przed Z"
|
|
#define MSG_ZPROBE_ZOFFSET "Offset Z"
|
|
#define MSG_BABYSTEP_X "Babystep X"
|
|
#define MSG_BABYSTEP_Y "Babystep Y"
|
|
#define MSG_BABYSTEP_Z "Babystep Z"
|
|
#define MSG_ENDSTOP_ABORT "Blad wyl. kranc."
|
|
#define MSG_CONTRAST "Kontrast"
|
|
|
|
// Serial Console Messages
|
|
|
|
#define MSG_Enqueing "Kolejkowanie \""
|
|
#define MSG_POWERUP "Zasilanie wlaczone"
|
|
#define MSG_EXTERNAL_RESET " Reset (zewnetrzny)"
|
|
#define MSG_BROWNOUT_RESET " Reset (spadek napiecia)"
|
|
#define MSG_WATCHDOG_RESET " Reset (watchdog)"
|
|
#define MSG_SOFTWARE_RESET " Reset (programowy)"
|
|
#define MSG_AUTHOR " | Autor: "
|
|
#define MSG_CONFIGURATION_VER " Ostatnia aktualizacja: "
|
|
#define MSG_FREE_MEMORY " Wolna pamiec: "
|
|
#define MSG_PLANNER_BUFFER_BYTES " Bufor planisty krokow (w bajtach): "
|
|
#define MSG_OK "OK"
|
|
#define MSG_FILE_SAVED "Plik zapisany."
|
|
#define MSG_ERR_LINE_NO "Numer linijki nie jest ostatnim numerem linijki+1; ostatnia linijka:"
|
|
#define MSG_ERR_CHECKSUM_MISMATCH "Niezgodna suma kontrolna; ostatnia linijka: "
|
|
#define MSG_ERR_NO_CHECKSUM "Brak sumy kontrolnej w linijce; ostatnia linijka:"
|
|
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Brak numery linijki przy sumie kontrolnej; ostatnia linijka:"
|
|
#define MSG_FILE_PRINTED "Ukonczono wydruk z pliku"
|
|
#define MSG_BEGIN_FILE_LIST "Start listy plikow"
|
|
#define MSG_END_FILE_LIST "Koniec listy plikow"
|
|
#define MSG_M104_INVALID_EXTRUDER "M104 Niepoprawny ekstruder "
|
|
#define MSG_M105_INVALID_EXTRUDER "M105 Niepoprawny ekstruder "
|
|
#define MSG_M200_INVALID_EXTRUDER "M200 Niepoprawny ekstruder "
|
|
#define MSG_M218_INVALID_EXTRUDER "M218 Niepoprawny ekstruder "
|
|
#define MSG_M221_INVALID_EXTRUDER "M221 Niepoprawny ekstruder "
|
|
#define MSG_ERR_NO_THERMISTORS "Brak termistorow - brak temperatury :("
|
|
#define MSG_M109_INVALID_EXTRUDER "M109 Niepoprawny ekstruder "
|
|
#define MSG_HEATING "Nagrzewanie ekstrudera..."
|
|
#define MSG_HEATING_COMPLETE "Nagrzewanie ekstrudera zakonczone."
|
|
#define MSG_BED_HEATING "Nagrzewanie loza..."
|
|
#define MSG_BED_DONE "Nagrzewanie loza zakonczone."
|
|
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
|
|
#define MSG_COUNT_X " Licznik X: "
|
|
#define MSG_ERR_KILLED "Drukarka zatrzymana. Wywolano kill()"
|
|
#define MSG_ERR_STOPPED "Drukarka zatrzymana z powodu bledu. Usun problem i zrestartuj drukartke komenda M999. (temperatura zostala zresetowana; ustaw temperature po restarcie)"
|
|
#define MSG_RESEND "Wyslij ponownie: "
|
|
#define MSG_UNKNOWN_COMMAND "Nieznane polecenie: \""
|
|
#define MSG_ACTIVE_EXTRUDER "Aktywny ekstruder: "
|
|
#define MSG_INVALID_EXTRUDER "Niepoprawny ekstruder"
|
|
#define MSG_X_MIN "x_min: "
|
|
#define MSG_X_MAX "x_max: "
|
|
#define MSG_Y_MIN "y_min: "
|
|
#define MSG_Y_MAX "y_max: "
|
|
#define MSG_Z_MIN "z_min: "
|
|
#define MSG_Z_MAX "z_max: "
|
|
#define MSG_M119_REPORT "Zgloszenie statusu wylacznikow krancowych"
|
|
#define MSG_ENDSTOP_HIT "Wyzwolony"
|
|
#define MSG_ENDSTOP_OPEN "Otwarty"
|
|
#define MSG_HOTEND_OFFSET "Offsety dysz:"
|
|
|
|
#define MSG_SD_CANT_OPEN_SUBDIR "Nie mozna otworzyc podkatalogu"
|
|
#define MSG_SD_INIT_FAIL "Blad inicjalizacji karty SD"
|
|
#define MSG_SD_VOL_INIT_FAIL "Blad inizjalizacji wolumenu"
|
|
#define MSG_SD_OPENROOT_FAIL "Blad odczytywania katalogu glownego"
|
|
#define MSG_SD_CARD_OK "Karta SD zainicjalizowana"
|
|
#define MSG_SD_WORKDIR_FAIL "Blad odczytywania katalogu roboczego"
|
|
#define MSG_SD_OPEN_FILE_FAIL "Nie mozna otworzyc pliku: "
|
|
#define MSG_SD_FILE_OPENED "Otwarto plik:"
|
|
#define MSG_SD_SIZE " Rozmiar:"
|
|
#define MSG_SD_FILE_SELECTED "Wybrano plik"
|
|
#define MSG_SD_WRITE_TO_FILE "Zapisywanie do pliku: "
|
|
#define MSG_SD_PRINTING_BYTE "Drukowanie z karty SD, bajt "
|
|
#define MSG_SD_NOT_PRINTING "Nie trwa drukowanie z karty SD"
|
|
#define MSG_SD_ERR_WRITE_TO_FILE "Wystapil blad podczas zapisu do pliku"
|
|
#define MSG_SD_CANT_ENTER_SUBDIR "Nie mozna odczytac podkatalogu: "
|
|
|
|
#define MSG_STEPPER_TOO_HIGH "Za duza czestotliwosc krokow: "
|
|
#define MSG_ENDSTOPS_HIT "Wylacznik krancowy zostal wyzwolony na pozycji: "
|
|
#define MSG_ERR_COLD_EXTRUDE_STOP " uniemozliwiono zimna ekstruzje"
|
|
#define MSG_ERR_LONG_EXTRUDE_STOP " uniemozliwiono zbyt dluga ekstruzje"
|
|
#define MSG_BABYSTEPPING_X "Babystepping w osi X"
|
|
#define MSG_BABYSTEPPING_Y "Babystepping w osi Y"
|
|
#define MSG_BABYSTEPPING_Z "Babystepping w osi Z"
|
|
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
|
|
|
|
#endif
|
|
|
|
|
|
#if LANGUAGE_CHOICE == 3
|
|
|
|
// LCD Menu Messages
|
|
// Please note these are limited to 17 characters!
|
|
|
|
#define WELCOME_MSG MACHINE_NAME " prete."
|
|
#define MSG_SD_INSERTED "Carte inseree"
|
|
#define MSG_SD_REMOVED "Carte retiree"
|
|
#define MSG_MAIN "Menu principal"
|
|
#define MSG_AUTOSTART "Demarrage auto"
|
|
#define MSG_DISABLE_STEPPERS "Arreter moteurs"
|
|
#define MSG_AUTO_HOME "Home auto."
|
|
#define MSG_SET_ORIGIN "Regler origine"
|
|
#define MSG_PREHEAT_PLA " Prechauffage PLA"
|
|
#define MSG_PREHEAT_PLA0 "Prechauff. PLA 1"
|
|
#define MSG_PREHEAT_PLA1 "Prechauff. PLA 2"
|
|
#define MSG_PREHEAT_PLA2 "Prechauff. PLA 3"
|
|
#define MSG_PREHEAT_PLA012 "Prech. PLA Tout"
|
|
#define MSG_PREHEAT_PLA_BEDONLY "Prech. PLA Plateau"
|
|
#define MSG_PREHEAT_PLA_SETTINGS "Regl. prech. PLA"
|
|
#define MSG_PREHEAT_ABS "Prechauffage ABS"
|
|
#define MSG_PREHEAT_ABS0 "Prechauff. ABS 1"
|
|
#define MSG_PREHEAT_ABS1 "Prechauff. ABS 2"
|
|
#define MSG_PREHEAT_ABS2 "Prechauff. ABS 3"
|
|
#define MSG_PREHEAT_ABS012 "Prech. ABS Tout"
|
|
#define MSG_PREHEAT_ABS_BEDONLY "Prech. ABS Plateau"
|
|
#define MSG_PREHEAT_ABS_SETTINGS "Regl. prech. ABS"
|
|
#define MSG_COOLDOWN "Refroidir"
|
|
#define MSG_SWITCH_PS_ON "Allumer alim."
|
|
#define MSG_SWITCH_PS_OFF "Eteindre alim."
|
|
#define MSG_EXTRUDE "Extrusion"
|
|
#define MSG_RETRACT "Retraction"
|
|
#define MSG_PREHEAT_PLA "Prechauffage PLA"
|
|
#define MSG_PREHEAT_ABS "Prechauffage ABS"
|
|
#define MSG_MOVE_AXIS "Deplacer un axe"
|
|
#define MSG_MOVE_X "Move X"
|
|
#define MSG_MOVE_Y "Move Y"
|
|
#define MSG_MOVE_Z "Move Z"
|
|
#define MSG_MOVE_E "Extruder"
|
|
#define MSG_MOVE_E1 "Extruder2"
|
|
#define MSG_MOVE_E2 "Extruder3"
|
|
#define MSG_MOVE_01MM "Move 0.1mm"
|
|
#define MSG_MOVE_1MM "Move 1mm"
|
|
#define MSG_MOVE_10MM "Move 10mm"
|
|
#define MSG_SPEED " Vitesse"
|
|
#define MSG_NOZZLE "Buse"
|
|
#define MSG_NOZZLE1 "Buse2"
|
|
#define MSG_NOZZLE2 "Buse3"
|
|
#define MSG_BED "Plateau"
|
|
#define MSG_FAN_SPEED "Vite. ventilateur"
|
|
#define MSG_FLOW "Flux"
|
|
#define MSG_FLOW0 "Flux 0"
|
|
#define MSG_FLOW1 "Flux 1"
|
|
#define MSG_FLOW2 "Flux 2"
|
|
#define MSG_CONTROL "Controler"
|
|
#define MSG_MIN " \002 Min"
|
|
#define MSG_MAX " \002 Max"
|
|
#define MSG_FACTOR " \002 Facteur"
|
|
#define MSG_AUTOTEMP "Temp. Auto."
|
|
#define MSG_ON "Marche "
|
|
#define MSG_OFF "Arret"
|
|
#define MSG_PID_P "PID-P"
|
|
#define MSG_PID_I "PID-I"
|
|
#define MSG_PID_D "PID-D"
|
|
#define MSG_PID_C "PID-C"
|
|
#define MSG_ACC "Accel"
|
|
#define MSG_VXY_JERK "Vxy-jerk"
|
|
#define MSG_VZ_JERK "Vz-jerk"
|
|
#define MSG_VE_JERK "Ve-jerk"
|
|
#define MSG_VMAX "Vmax"
|
|
#define MSG_X "x"
|
|
#define MSG_Y "y"
|
|
#define MSG_Z "z"
|
|
#define MSG_E "e"
|
|
#define MSG_VMIN "Vmin"
|
|
#define MSG_VTRAV_MIN "Vdepl min"
|
|
#define MSG_AMAX "Amax "
|
|
#define MSG_A_RETRACT "A-retract"
|
|
#define MSG_XSTEPS "Xpas/mm"
|
|
#define MSG_YSTEPS "Ypas/mm"
|
|
#define MSG_ZSTEPS "Zpas/mm"
|
|
#define MSG_ESTEPS "Epas/mm"
|
|
#define MSG_TEMPERATURE "Temperature"
|
|
#define MSG_MOTION "Mouvement"
|
|
#define MSG_CONTRAST "Contraste LCD"
|
|
#define MSG_STORE_EPROM "Sauver config"
|
|
#define MSG_LOAD_EPROM "Lire config"
|
|
#define MSG_RESTORE_FAILSAFE "Restaurer defauts"
|
|
#define MSG_REFRESH "Actualiser"
|
|
#define MSG_WATCH "Surveiller"
|
|
#define MSG_PREPARE "Preparer"
|
|
#define MSG_TUNE "Regler"
|
|
#define MSG_PAUSE_PRINT "Interrompre impr."
|
|
#define MSG_RESUME_PRINT "Reprendre impr."
|
|
#define MSG_STOP_PRINT "Arreter impr."
|
|
#define MSG_CARD_MENU "Impr. depuis SD"
|
|
#define MSG_NO_CARD "Pas de carte"
|
|
#define MSG_DWELL "Repos..."
|
|
#define MSG_USERWAIT "Atten. de l'util."
|
|
#define MSG_RESUMING "Repri. de l'impr."
|
|
#define MSG_NO_MOVE "Aucun mouvement."
|
|
#define MSG_KILLED "MORT."
|
|
#define MSG_STOPPED "STOPPE."
|
|
#define MSG_STEPPER_RELEASED "RELACHE."
|
|
#define MSG_CONTROL_RETRACT "Retraction mm"
|
|
#define MSG_CONTROL_RETRACT_SWAP "Ech. Retr. mm"
|
|
#define MSG_CONTROL_RETRACTF "Retraction V"
|
|
#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Ech. UnRet +mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"
|
|
#define MSG_AUTORETRACT "Retract. Auto."
|
|
#define MSG_FILAMENTCHANGE "Changer filament"
|
|
#define MSG_INIT_SDCARD "Init. la carte SD"
|
|
#define MSG_CNG_SDCARD "Changer de carte"
|
|
#define MSG_ZPROBE_OUT "Z sonde exte. lit"
|
|
#define MSG_POSITION_UNKNOWN "Rev. dans XY av.Z"
|
|
#define MSG_ZPROBE_ZOFFSET "Offset Z"
|
|
#define MSG_BABYSTEP_X "Babystep X"
|
|
#define MSG_BABYSTEP_Y "Babystep Y"
|
|
#define MSG_BABYSTEP_Z "Babystep Z"
|
|
#define MSG_ENDSTOP_ABORT "Butee abandon"
|
|
#define MSG_CONTRAST "Contrast"
|
|
|
|
// Serial Console Messages
|
|
|
|
#define MSG_Enqueing "Mise en tampon \""
|
|
#define MSG_POWERUP "Allumage"
|
|
#define MSG_EXTERNAL_RESET " RAZ Externe"
|
|
#define MSG_BROWNOUT_RESET " RAZ defaut alim."
|
|
#define MSG_WATCHDOG_RESET " RAZ Watchdog"
|
|
#define MSG_SOFTWARE_RESET " RAZ logicielle"
|
|
#define MSG_AUTHOR " | Auteur: "
|
|
#define MSG_CONFIGURATION_VER " Derniere MaJ: "
|
|
#define MSG_FREE_MEMORY " Memoire libre: "
|
|
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
|
|
#define MSG_OK "ok"
|
|
#define MSG_FILE_SAVED "Fichier enregistre."
|
|
#define MSG_ERR_LINE_NO "Le numero de ligne n'est pas la derniere ligne + 1, derniere ligne: "
|
|
#define MSG_ERR_CHECKSUM_MISMATCH "Erreur somme de controle, derniere ligne: "
|
|
#define MSG_ERR_NO_CHECKSUM "Pas de somme de controle avec le numero de ligne, derniere ligne: "
|
|
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Pas de numero de ligne avec somme de controle, derniere ligne: "
|
|
#define MSG_FILE_PRINTED "Impression terminee"
|
|
#define MSG_BEGIN_FILE_LIST "Debut de la liste de fichiers"
|
|
#define MSG_END_FILE_LIST "Fin de la liste de fichiers"
|
|
#define MSG_M104_INVALID_EXTRUDER "M104 Extruder invalide"
|
|
#define MSG_M105_INVALID_EXTRUDER "M105 Extruder invalide"
|
|
#define MSG_M200_INVALID_EXTRUDER "M200 Extruder invalide"
|
|
#define MSG_M218_INVALID_EXTRUDER "M218 Extruder invalide"
|
|
#define MSG_M221_INVALID_EXTRUDER "M221 Extruder invalide"
|
|
#define MSG_ERR_NO_THERMISTORS "Pas de thermistor, pas de temperature"
|
|
#define MSG_M109_INVALID_EXTRUDER "M109 Extruder invalide "
|
|
#define MSG_HEATING "En chauffe..."
|
|
#define MSG_HEATING_COMPLETE "Chauffe terminee."
|
|
#define MSG_BED_HEATING "Chauffe du lit."
|
|
#define MSG_BED_DONE "Chauffe du lit terminee."
|
|
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
|
|
#define MSG_COUNT_X " Compteur X: "
|
|
#define MSG_ERR_KILLED "Impression arretee. kill() appelee!"
|
|
#define MSG_ERR_STOPPED "Impression arretee a cause d'erreurs. Corriger les erreurs et utiliser M999 pour la reprendre. (Temperature remise a zero. Reactivez la apres redemarrage)"
|
|
#define MSG_RESEND "Renvoie: "
|
|
#define MSG_UNKNOWN_COMMAND "Commande inconnue: \""
|
|
#define MSG_ACTIVE_EXTRUDER "Extrudeur actif: "
|
|
#define MSG_INVALID_EXTRUDER "Extrudeur invalide"
|
|
#define MSG_X_MIN "x_min: "
|
|
#define MSG_X_MAX "x_max: "
|
|
#define MSG_Y_MIN "y_min: "
|
|
#define MSG_Y_MAX "y_max: "
|
|
#define MSG_Z_MIN "z_min: "
|
|
#define MSG_Z_MAX "z_max: "
|
|
#define MSG_M119_REPORT "Affichage du status des fin de course"
|
|
#define MSG_ENDSTOP_HIT "DECLENCHE"
|
|
#define MSG_ENDSTOP_OPEN "OUVERT"
|
|
#define MSG_HOTEND_OFFSET "Hotend offsets:"
|
|
|
|
#define MSG_SD_CANT_OPEN_SUBDIR "Impossible d'ouvrir le sous-repertoire"
|
|
#define MSG_SD_INIT_FAIL "Echec de l'initialisation de la SD"
|
|
#define MSG_SD_VOL_INIT_FAIL "Echec de volume.init"
|
|
#define MSG_SD_OPENROOT_FAIL "Echec openRoot"
|
|
#define MSG_SD_CARD_OK "Carte SD Ok"
|
|
#define MSG_SD_WORKDIR_FAIL "Echec d'ouverture workDir"
|
|
#define MSG_SD_OPEN_FILE_FAIL "Echec d'ouverture, Fichier: "
|
|
#define MSG_SD_FILE_OPENED "Fichier ouvert: "
|
|
#define MSG_SD_SIZE " Taille: "
|
|
#define MSG_SD_FILE_SELECTED "Fichier selectionne"
|
|
#define MSG_SD_WRITE_TO_FILE "Ecriture dans le fichier: "
|
|
#define MSG_SD_PRINTING_BYTE "Octet impression SD "
|
|
#define MSG_SD_NOT_PRINTING "Pas d'impression SD"
|
|
#define MSG_SD_ERR_WRITE_TO_FILE "Erreur d'ecriture dans le fichier"
|
|
#define MSG_SD_CANT_ENTER_SUBDIR "Impossible d'entrer dans le sous-repertoire: "
|
|
|
|
#define MSG_STEPPER_TOO_HIGH "Steprate trop eleve: "
|
|
#define MSG_ENDSTOPS_HIT "Fin de course atteint: "
|
|
#define MSG_ERR_COLD_EXTRUDE_STOP " Extrusion a froid evitee"
|
|
#define MSG_ERR_LONG_EXTRUDE_STOP " Extrusion longue evitee"
|
|
#define MSG_BABYSTEPPING_X "Babystepping X"
|
|
#define MSG_BABYSTEPPING_Y "Babystepping Y"
|
|
#define MSG_BABYSTEPPING_Z "Babystepping Z"
|
|
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
|
|
|
|
#endif
|
|
|
|
|
|
#if LANGUAGE_CHOICE == 4
|
|
|
|
// LCD Menu Messages
|
|
// Please note these are limited to 17 characters!
|
|
|
|
#define WELCOME_MSG MACHINE_NAME " Bereit."
|
|
|
|
#define MSG_SD_INSERTED "SDKarte erkannt"
|
|
#define MSG_SD_REMOVED "SDKarte entfernt"
|
|
#define MSG_MAIN "Hauptmenü"
|
|
#define MSG_AUTOSTART "Autostart"
|
|
#define MSG_DISABLE_STEPPERS "Stepper abschalt."
|
|
#define MSG_AUTO_HOME "Auto Nullpunkt"
|
|
#define MSG_SET_ORIGIN "Setze Nullpunkt"
|
|
#define MSG_PREHEAT_PLA "Vorwärmen PLA"
|
|
#define MSG_PREHEAT_PLA0 "Vorwärmen PLA 1"
|
|
#define MSG_PREHEAT_PLA1 "Vorwärmen PLA 2"
|
|
#define MSG_PREHEAT_PLA2 "Vorwärmen PLA 3"
|
|
#define MSG_PREHEAT_PLA012 "Vorw. PLA Alle"
|
|
#define MSG_PREHEAT_PLA_BEDONLY "Vorw. PLA Bett"
|
|
#define MSG_PREHEAT_PLA_SETTINGS "Vorwärm. PLA Ein."
|
|
#define MSG_PREHEAT_ABS "Vorwärmen ABS"
|
|
#define MSG_PREHEAT_ABS0 "Vorwärmen ABS 1"
|
|
#define MSG_PREHEAT_ABS1 "Vorwärmen ABS 2"
|
|
#define MSG_PREHEAT_ABS2 "Vorwärmen ABS 3"
|
|
#define MSG_PREHEAT_ABS012 "Vorw. ABS Alle"
|
|
#define MSG_PREHEAT_ABS_BEDONLY "Vorw. ABS Bett"
|
|
#define MSG_PREHEAT_ABS_SETTINGS "Vorwärm. ABS Ein."
|
|
#define MSG_COOLDOWN "Abkühlen"
|
|
#define MSG_SWITCH_PS_ON "Switch Power On"
|
|
#define MSG_SWITCH_PS_OFF "Switch Power Off"
|
|
#define MSG_EXTRUDE "Extrude"
|
|
#define MSG_RETRACT "Retract"
|
|
#define MSG_MOVE_AXIS "Achsen bewegen"
|
|
#define MSG_MOVE_X "X bewegen"
|
|
#define MSG_MOVE_Y "Y bewegen"
|
|
#define MSG_MOVE_Z "Z bewegen"
|
|
#define MSG_MOVE_E "Extruder"
|
|
#define MSG_MOVE_E1 "Extruder2"
|
|
#define MSG_MOVE_E2 "Extruder3"
|
|
#define MSG_MOVE_01MM "0.1mm bewegen"
|
|
#define MSG_MOVE_1MM "1mm bewegen"
|
|
#define MSG_MOVE_10MM "10mm bewegen"
|
|
#define MSG_SPEED "Geschw"
|
|
#define MSG_NOZZLE "Düse"
|
|
#define MSG_NOZZLE1 "Düse2"
|
|
#define MSG_NOZZLE2 "Düse3"
|
|
#define MSG_BED "Bett"
|
|
#define MSG_FAN_SPEED "Lüftergeschw."
|
|
#define MSG_FLOW "Fluss"
|
|
#define MSG_FLOW0 "Fluss 0"
|
|
#define MSG_FLOW1 "Fluss 1"
|
|
#define MSG_FLOW2 "Fluss 2"
|
|
#define MSG_CONTROL "Einstellungen"
|
|
#define MSG_MIN "\002 Min"
|
|
#define MSG_MAX "\002 Max"
|
|
#define MSG_FACTOR "\002 Faktor"
|
|
#define MSG_AUTOTEMP "AutoTemp"
|
|
#define MSG_ON "Ein"
|
|
#define MSG_OFF "Aus"
|
|
#define MSG_PID_P "PID-P"
|
|
#define MSG_PID_I "PID-I"
|
|
#define MSG_PID_D "PID-D"
|
|
#define MSG_PID_C "PID-C"
|
|
#define MSG_ACC "Acc"
|
|
#define MSG_VXY_JERK "Vxy-jerk"
|
|
#define MSG_VZ_JERK "Vz-jerk"
|
|
#define MSG_VE_JERK "Ve-jerk"
|
|
#define MSG_VMAX "Vmax "
|
|
#define MSG_X "x"
|
|
#define MSG_Y "y"
|
|
#define MSG_Z "z"
|
|
#define MSG_E "e"
|
|
#define MSG_VMIN "Vmin"
|
|
#define MSG_VTRAV_MIN "VTrav min"
|
|
#define MSG_AMAX "Amax "
|
|
#define MSG_A_RETRACT "A-Retract"
|
|
#define MSG_XSTEPS "Xsteps/mm"
|
|
#define MSG_YSTEPS "Ysteps/mm"
|
|
#define MSG_ZSTEPS "Zsteps/mm"
|
|
#define MSG_ESTEPS "Esteps/mm"
|
|
#define MSG_RECTRACT_WIDE "Rectract"
|
|
#define MSG_WATCH "Beobachten"
|
|
#define MSG_TEMPERATURE "Temperatur"
|
|
#define MSG_MOTION "Bewegung"
|
|
#define MSG_CONTRAST "LCD contrast"
|
|
#define MSG_STORE_EPROM "EPROM speichern"
|
|
#define MSG_LOAD_EPROM "EPROM laden"
|
|
#define MSG_RESTORE_FAILSAFE "Standardkonfig."
|
|
#define MSG_REFRESH "Aktualisieren"
|
|
#define MSG_PREPARE "Vorbereitung"
|
|
#define MSG_CONTROL "Einstellungen"
|
|
#define MSG_TUNE "Justierung"
|
|
#define MSG_PAUSE_PRINT "Druck anhalten"
|
|
#define MSG_RESUME_PRINT "Druck fortsetz"
|
|
#define MSG_STOP_PRINT "Druck stoppen"
|
|
#define MSG_CARD_MENU "SDKarten Menü"
|
|
#define MSG_NO_CARD "Keine SDKarte"
|
|
#define MSG_DWELL "Warten..."
|
|
#define MSG_USERWAIT "Warte auf Nutzer"
|
|
#define MSG_RESUMING "Druck fortsetzung"
|
|
#define MSG_NO_MOVE "Kein Zug."
|
|
#define MSG_KILLED "KILLED"
|
|
#define MSG_STOPPED "GESTOPPT"
|
|
#define MSG_STEPPER_RELEASED "Stepper frei"
|
|
#define MSG_CONTROL_RETRACT "Retract mm"
|
|
#define MSG_CONTROL_RETRACT_SWAP "Wechs. Retract mm"
|
|
#define MSG_CONTROL_RETRACTF "Retract V"
|
|
#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Wechs. UnRet +mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"
|
|
#define MSG_AUTORETRACT "AutoRetr."
|
|
#define MSG_FILAMENTCHANGE "Filament wechseln"
|
|
#define MSG_INIT_SDCARD "Init. SD-Card"
|
|
#define MSG_CNG_SDCARD "Change SD-Card"
|
|
#define MSG_ZPROBE_OUT "Z probe out. bed"
|
|
#define MSG_POSITION_UNKNOWN "Home X/Y before Z"
|
|
#define MSG_ZPROBE_ZOFFSET "Z Offset"
|
|
#define MSG_BABYSTEP_X "Babystep X"
|
|
#define MSG_BABYSTEP_Y "Babystep Y"
|
|
#define MSG_BABYSTEP_Z "Babystep Z"
|
|
#define MSG_ENDSTOP_ABORT "Endstop abort"
|
|
#define MSG_CONTRAST "Contrast"
|
|
|
|
// Serial Console Messages
|
|
|
|
#define MSG_Enqueing "enqueing \""
|
|
#define MSG_POWERUP "PowerUp"
|
|
#define MSG_EXTERNAL_RESET " External Reset"
|
|
#define MSG_BROWNOUT_RESET " Brown out Reset"
|
|
#define MSG_WATCHDOG_RESET " Watchdog Reset"
|
|
#define MSG_SOFTWARE_RESET " Software Reset"
|
|
#define MSG_AUTHOR " | Author: "
|
|
#define MSG_CONFIGURATION_VER " Last Updated: "
|
|
#define MSG_FREE_MEMORY " Free Memory: "
|
|
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
|
|
#define MSG_OK "ok"
|
|
#define MSG_FILE_SAVED "Done saving file."
|
|
#define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line:"
|
|
#define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line:"
|
|
#define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line:"
|
|
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line:"
|
|
#define MSG_FILE_PRINTED "Done printing file"
|
|
#define MSG_BEGIN_FILE_LIST "Begin file list"
|
|
#define MSG_END_FILE_LIST "End file list"
|
|
#define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
|
|
#define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
|
|
#define MSG_M200_INVALID_EXTRUDER "M200 Invalid extruder "
|
|
#define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder "
|
|
#define MSG_M221_INVALID_EXTRUDER "M221 Invalid extruder "
|
|
#define MSG_ERR_NO_THERMISTORS "No thermistors - no temp"
|
|
#define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
|
|
#define MSG_HEATING "Heating..."
|
|
#define MSG_HEATING_COMPLETE "Heating done."
|
|
#define MSG_BED_HEATING "Bed Heating."
|
|
#define MSG_BED_DONE "Bed done."
|
|
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
|
|
#define MSG_COUNT_X " Count X:"
|
|
#define MSG_ERR_KILLED "Printer halted. kill() called !!"
|
|
#define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart!"
|
|
#define MSG_RESEND "Resend:"
|
|
#define MSG_UNKNOWN_COMMAND "Unknown command:\""
|
|
#define MSG_ACTIVE_EXTRUDER "Active Extruder: "
|
|
#define MSG_INVALID_EXTRUDER "Invalid extruder"
|
|
#define MSG_X_MIN "x_min: "
|
|
#define MSG_X_MAX "x_max: "
|
|
#define MSG_Y_MIN "y_min: "
|
|
#define MSG_Y_MAX "y_max: "
|
|
#define MSG_Z_MIN "z_min: "
|
|
#define MSG_Z_MAX "z_max: "
|
|
#define MSG_M119_REPORT "Reporting endstop status"
|
|
#define MSG_ENDSTOP_HIT "TRIGGERED"
|
|
#define MSG_ENDSTOP_OPEN "open"
|
|
#define MSG_HOTEND_OFFSET "Hotend offsets:"
|
|
|
|
#define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
|
|
#define MSG_SD_INIT_FAIL "SD init fail"
|
|
#define MSG_SD_VOL_INIT_FAIL "volume.init failed"
|
|
#define MSG_SD_OPENROOT_FAIL "openRoot failed"
|
|
#define MSG_SD_CARD_OK "SD card ok"
|
|
#define MSG_SD_WORKDIR_FAIL "workDir open failed"
|
|
#define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
|
|
#define MSG_SD_FILE_OPENED "File opened:"
|
|
#define MSG_SD_SIZE " Size:"
|
|
#define MSG_SD_FILE_SELECTED "File selected"
|
|
#define MSG_SD_WRITE_TO_FILE "Writing to file: "
|
|
#define MSG_SD_PRINTING_BYTE "SD printing byte "
|
|
#define MSG_SD_NOT_PRINTING "Not SD printing"
|
|
#define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
|
|
#define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir:"
|
|
|
|
#define MSG_STEPPER_TOO_HIGH "Steprate too high : "
|
|
#define MSG_ENDSTOPS_HIT "endstops hit: "
|
|
#define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
|
|
#define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"
|
|
#define MSG_BABYSTEPPING_X "Babystepping X"
|
|
#define MSG_BABYSTEPPING_Y "Babystepping Y"
|
|
#define MSG_BABYSTEPPING_Z "Babystepping Z"
|
|
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
|
|
|
|
#endif
|
|
|
|
|
|
#if LANGUAGE_CHOICE == 5
|
|
|
|
// LCD Menu Messages
|
|
// Please note these are limited to 17 characters!
|
|
|
|
#define WELCOME_MSG MACHINE_NAME " lista."
|
|
#define MSG_SD_INSERTED "Tarjeta colocada"
|
|
#define MSG_SD_REMOVED "Tarjeta retirada"
|
|
#define MSG_MAIN "Menu principal"
|
|
#define MSG_AUTOSTART " Autostart"
|
|
#define MSG_DISABLE_STEPPERS "Apagar motores"
|
|
#define MSG_AUTO_HOME "Llevar al origen"
|
|
#define MSG_SET_ORIGIN "Establecer cero"
|
|
#define MSG_PREHEAT_PLA "Precalentar PLA"
|
|
#define MSG_PREHEAT_PLA0 "Precalentar PLA 1"
|
|
#define MSG_PREHEAT_PLA1 "Precalentar PLA 2"
|
|
#define MSG_PREHEAT_PLA2 "Precalentar PLA 3"
|
|
#define MSG_PREHEAT_PLA012 "Precal. PLA Todo"
|
|
#define MSG_PREHEAT_PLA_BEDONLY "Precal. PLA Base"
|
|
#define MSG_PREHEAT_PLA_SETTINGS "Ajustar temp. PLA"
|
|
#define MSG_PREHEAT_ABS "Precalentar ABS"
|
|
#define MSG_PREHEAT_ABS0 "Precalentar ABS 1"
|
|
#define MSG_PREHEAT_ABS1 "Precalentar ABS 2"
|
|
#define MSG_PREHEAT_ABS2 "Precalentar ABS 3"
|
|
#define MSG_PREHEAT_ABS012 "Precal. ABS Todo"
|
|
#define MSG_PREHEAT_ABS_BEDONLY "Precal. ABS Base"
|
|
#define MSG_PREHEAT_ABS_SETTINGS "Ajustar temp. ABS"
|
|
#define MSG_COOLDOWN "Enfriar"
|
|
#define MSG_SWITCH_PS_ON "Switch Power On"
|
|
#define MSG_SWITCH_PS_OFF "Switch Power Off"
|
|
#define MSG_EXTRUDE "Extruir"
|
|
#define MSG_RETRACT "Retraer"
|
|
#define MSG_MOVE_AXIS "Mover ejes"
|
|
#define MSG_MOVE_X "Mover X"
|
|
#define MSG_MOVE_Y "Mover Y"
|
|
#define MSG_MOVE_Z "Mover Z"
|
|
#define MSG_MOVE_E "Extrusor"
|
|
#define MSG_MOVE_E1 "Extrusor2"
|
|
#define MSG_MOVE_E2 "Extrusor3"
|
|
#define MSG_MOVE_01MM "Mover 0.1mm"
|
|
#define MSG_MOVE_1MM "Mover 1mm"
|
|
#define MSG_MOVE_10MM "Mover 10mm"
|
|
#define MSG_SPEED "Velocidad"
|
|
#define MSG_NOZZLE "Nozzle"
|
|
#define MSG_NOZZLE1 "Nozzle2"
|
|
#define MSG_NOZZLE2 "Nozzle3"
|
|
#define MSG_BED "Base"
|
|
#define MSG_FAN_SPEED "Ventilador"
|
|
#define MSG_FLOW "Flujo"
|
|
#define MSG_FLOW0 "Flujo 0"
|
|
#define MSG_FLOW1 "Flujo 1"
|
|
#define MSG_FLOW2 "Flujo 2"
|
|
#define MSG_CONTROL "Control"
|
|
#define MSG_MIN "\002 Min"
|
|
#define MSG_MAX "\002 Max"
|
|
#define MSG_FACTOR "\002 Fact"
|
|
#define MSG_AUTOTEMP "Autotemp"
|
|
#define MSG_ON "On"
|
|
#define MSG_OFF "Off"
|
|
#define MSG_PID_P "PID-P"
|
|
#define MSG_PID_I "PID-I"
|
|
#define MSG_PID_D "PID-D"
|
|
#define MSG_PID_C "PID-C"
|
|
#define MSG_ACC "Acel"
|
|
#define MSG_VXY_JERK "Vxy-jerk"
|
|
#define MSG_VZ_JERK "Vz-jerk"
|
|
#define MSG_VE_JERK "Ve-jerk"
|
|
#define MSG_VMAX "Vmax"
|
|
#define MSG_X "x"
|
|
#define MSG_Y "y"
|
|
#define MSG_Z "z"
|
|
#define MSG_E "e"
|
|
#define MSG_VMIN "Vmin"
|
|
#define MSG_VTRAV_MIN "VTrav min"
|
|
#define MSG_AMAX "Amax"
|
|
#define MSG_A_RETRACT "A-retrac."
|
|
#define MSG_XSTEPS "X pasos/mm"
|
|
#define MSG_YSTEPS "Y pasos/mm"
|
|
#define MSG_ZSTEPS "Z pasos/mm"
|
|
#define MSG_ESTEPS "E pasos/mm"
|
|
#define MSG_RECTRACT "Retraer"
|
|
#define MSG_TEMPERATURE "Temperatura"
|
|
#define MSG_MOTION "Movimiento"
|
|
#define MSG_STORE_EPROM "Guardar memoria"
|
|
#define MSG_LOAD_EPROM "Cargar memoria"
|
|
#define MSG_RESTORE_FAILSAFE "Rest. de emergen."
|
|
#define MSG_REFRESH "Volver a cargar"
|
|
#define MSG_WATCH "Monitorizar"
|
|
#define MSG_PREPARE "Preparar"
|
|
#define MSG_TUNE "Ajustar"
|
|
#define MSG_PAUSE_PRINT "Pausar impresion"
|
|
#define MSG_RESUME_PRINT "Reanudar impres."
|
|
#define MSG_STOP_PRINT "Detener impresion"
|
|
#define MSG_CARD_MENU "Menu de SD"
|
|
#define MSG_NO_CARD "No hay tarjeta SD"
|
|
#define MSG_DWELL "Reposo..."
|
|
#define MSG_USERWAIT "Esperando ordenes"
|
|
#define MSG_RESUMING "Resumiendo impre."
|
|
#define MSG_NO_MOVE "Sin movimiento"
|
|
#define MSG_KILLED "PARADA DE EMERG."
|
|
#define MSG_STOPPED "PARADA"
|
|
#define MSG_CONTROL_RETRACT "Retraer mm"
|
|
#define MSG_CONTROL_RETRACT_SWAP "Interc. Retraer mm"
|
|
#define MSG_CONTROL_RETRACTF "Retraer V"
|
|
#define MSG_CONTROL_RETRACT_ZLIFT "Levantar mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVER "DesRet +mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Interc. DesRet +mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVERF "DesRet V"
|
|
#define MSG_AUTORETRACT "AutoRetr."
|
|
#define MSG_FILAMENTCHANGE "Cambiar filamento"
|
|
#define MSG_INIT_SDCARD "Iniciando tarjeta"
|
|
#define MSG_CNG_SDCARD "Cambiar tarjeta"
|
|
#define MSG_RECTRACT_WIDE "Retraer"
|
|
#define MSG_TEMPERATURE_WIDE "Temperatura"
|
|
#define MSG_TEMPERATURE_RTN "Temperatura"
|
|
#define MSG_MAIN_WIDE "Menu principal"
|
|
#define MSG_MOTION_WIDE "Movimiento"
|
|
#define MSG_PREPARE_ALT "Preparar"
|
|
#define MSG_CONTROL_ARROW "Control"
|
|
#define MSG_RETRACT_ARROW "Retraer"
|
|
#define MSG_STEPPER_RELEASED "Desacoplada."
|
|
#define MSG_ZPROBE_OUT "Z probe out. bed"
|
|
#define MSG_POSITION_UNKNOWN "Home X/Y before Z"
|
|
#define MSG_ZPROBE_ZOFFSET "Z Offset"
|
|
#define MSG_BABYSTEP_X "Babystep X"
|
|
#define MSG_BABYSTEP_Y "Babystep Y"
|
|
#define MSG_BABYSTEP_Z "Babystep Z"
|
|
#define MSG_ENDSTOP_ABORT "Endstop abort"
|
|
#define MSG_CONTRAST "Contrast"
|
|
|
|
// Serial Console Messages
|
|
|
|
#define MSG_Enqueing "En cola \""
|
|
#define MSG_POWERUP "PowerUp"
|
|
#define MSG_EXTERNAL_RESET " Reset Externo"
|
|
#define MSG_BROWNOUT_RESET " Reset por Voltaje Incorrecto"
|
|
#define MSG_WATCHDOG_RESET " Reset por Bloqueo"
|
|
#define MSG_SOFTWARE_RESET " Reset por Software"
|
|
#define MSG_AUTHOR " | Autor: "
|
|
#define MSG_CONFIGURATION_VER " Ultima actualizacion: "
|
|
#define MSG_FREE_MEMORY " Memoria libre: "
|
|
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
|
|
#define MSG_OK "ok"
|
|
#define MSG_FILE_SAVED "Guardado."
|
|
#define MSG_ERR_LINE_NO "El Numero de Linea no es igual al Ultimo Numero de Linea+1, Ultima Linea:"
|
|
#define MSG_ERR_CHECKSUM_MISMATCH "el checksum no coincide, Ultima Linea:"
|
|
#define MSG_ERR_NO_CHECKSUM "No se pudo hallar el Checksum con el numero de linea, Ultima Linea:"
|
|
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No se hallo el Numero de Linea con el Checksum, Ultima Linea:"
|
|
#define MSG_FILE_PRINTED "Impresion terminada"
|
|
#define MSG_BEGIN_FILE_LIST "Comienzo de la lista de archivos"
|
|
#define MSG_END_FILE_LIST "Fin de la lista de archivos"
|
|
#define MSG_M104_INVALID_EXTRUDER "M104 Extrusor Invalido "
|
|
#define MSG_M105_INVALID_EXTRUDER "M105 Extrusor Invalido "
|
|
#define MSG_M200_INVALID_EXTRUDER "M200 Extrusor Invalido "
|
|
#define MSG_M218_INVALID_EXTRUDER "M218 Extrusor Invalido "
|
|
#define MSG_M221_INVALID_EXTRUDER "M221 Extrusor Invalido "
|
|
#define MSG_ERR_NO_THERMISTORS "No hay termistores - no temp"
|
|
#define MSG_M109_INVALID_EXTRUDER "M109 Extrusor Invalido "
|
|
#define MSG_HEATING "Calentando..."
|
|
#define MSG_HEATING_COMPLETE "Calentamiento Hecho."
|
|
#define MSG_BED_HEATING "Calentando la base."
|
|
#define MSG_BED_DONE "Base Caliente."
|
|
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
|
|
#define MSG_COUNT_X " Cuenta X:"
|
|
#define MSG_ERR_KILLED "¡¡Impresora Parada con kill()!!"
|
|
#define MSG_ERR_STOPPED "¡Impresora parada por errores. Arregle el error y use M999 Para reiniciar!. (La temperatura se reestablece. Ajustela despues de continuar)"
|
|
#define MSG_RESEND "Reenviar:"
|
|
#define MSG_UNKNOWN_COMMAND "Comando Desconocido:\""
|
|
#define MSG_ACTIVE_EXTRUDER "Extrusor Activo: "
|
|
#define MSG_INVALID_EXTRUDER "Extrusor Invalido"
|
|
#define MSG_X_MIN "x_min: "
|
|
#define MSG_X_MAX "x_max: "
|
|
#define MSG_Y_MIN "y_min: "
|
|
#define MSG_Y_MAX "y_max: "
|
|
#define MSG_Z_MIN "z_min: "
|
|
#define MSG_Z_MAX "z_max: "
|
|
#define MSG_M119_REPORT "Comprobando fines de carrera."
|
|
#define MSG_ENDSTOP_HIT "PULSADO"
|
|
#define MSG_ENDSTOP_OPEN "abierto"
|
|
#define MSG_HOTEND_OFFSET "Hotend offsets:"
|
|
#define MSG_SD_CANT_OPEN_SUBDIR "No se pudo abrir la subcarpeta."
|
|
#define MSG_SD_INIT_FAIL "Fallo al iniciar la SD"
|
|
#define MSG_SD_VOL_INIT_FAIL "Fallo al montar el volumen"
|
|
#define MSG_SD_OPENROOT_FAIL "Fallo al abrir la carpeta raiz"
|
|
#define MSG_SD_CARD_OK "Tarjeta SD OK"
|
|
#define MSG_SD_WORKDIR_FAIL "Fallo al abrir la carpeta de trabajo"
|
|
#define MSG_SD_OPEN_FILE_FAIL "Error al abrir, Archivo: "
|
|
#define MSG_SD_FILE_OPENED "Archivo abierto:"
|
|
#define MSG_SD_SIZE " Tamaño:"
|
|
#define MSG_SD_FILE_SELECTED "Archivo Seleccionado"
|
|
#define MSG_SD_WRITE_TO_FILE "Escribiendo en el archivo: "
|
|
#define MSG_SD_PRINTING_BYTE "SD imprimiendo el byte "
|
|
#define MSG_SD_NOT_PRINTING "No se esta imprimiendo con SD"
|
|
#define MSG_SD_ERR_WRITE_TO_FILE "Error al escribir en el archivo"
|
|
#define MSG_SD_CANT_ENTER_SUBDIR "No se puede abrir la carpeta:"
|
|
|
|
#define MSG_STEPPER_TOO_HIGH "Steprate demasiado alto : "
|
|
#define MSG_ENDSTOPS_HIT "Se ha tocado el fin de carril: "
|
|
#define MSG_ERR_COLD_EXTRUDE_STOP " extrusion fria evitada"
|
|
#define MSG_ERR_LONG_EXTRUDE_STOP " extrusion demasiado larga evitada"
|
|
#define MSG_BABYSTEPPING_X "Babystepping X"
|
|
#define MSG_BABYSTEPPING_Y "Babystepping Y"
|
|
#define MSG_BABYSTEPPING_Z "Babystepping Z"
|
|
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
|
|
|
|
#endif
|
|
|
|
#if LANGUAGE_CHOICE == 6
|
|
|
|
|
|
// LCD Menu Messages
|
|
// Please note these are limited to 17 characters!
|
|
|
|
#define WELCOME_MSG MACHINE_NAME "Готов."
|
|
#define MSG_SD_INSERTED "Карта вставлена"
|
|
#define MSG_SD_REMOVED "Карта извлечена"
|
|
#define MSG_MAIN "Меню \003"
|
|
#define MSG_AUTOSTART "Автостарт"
|
|
#define MSG_DISABLE_STEPPERS "Выкл. двигатели"
|
|
#define MSG_AUTO_HOME "Парковка"
|
|
#define MSG_SET_ORIGIN "Запомнить ноль"
|
|
#define MSG_PREHEAT_PLA "Преднагрев PLA"
|
|
#define MSG_PREHEAT_PLA0 "Преднагрев PLA0"
|
|
#define MSG_PREHEAT_PLA1 "Преднагрев PLA1"
|
|
#define MSG_PREHEAT_PLA2 "Преднагрев PLA2"
|
|
#define MSG_PREHEAT_PLA012 "Преднаг. PLA все"
|
|
#define MSG_PREHEAT_PLA_BEDONLY "Пред. PLA Кровать"
|
|
#define MSG_PREHEAT_PLA_SETTINGS "Настройки PLA"
|
|
#define MSG_PREHEAT_ABS "Преднагрев ABS"
|
|
#define MSG_PREHEAT_ABS0 "Преднагрев ABS0"
|
|
#define MSG_PREHEAT_ABS1 "Преднагрев ABS1"
|
|
#define MSG_PREHEAT_ABS2 "Преднагрев ABS2"
|
|
#define MSG_PREHEAT_ABS012 "Преднаг. ABS все "
|
|
#define MSG_PREHEAT_ABS_BEDONLY "Пред. ABS Кровать"
|
|
#define MSG_PREHEAT_ABS_SETTINGS "Настройки ABS"
|
|
#define MSG_COOLDOWN "Охлаждение"
|
|
#define MSG_SWITCH_PS_ON "Switch Power On"
|
|
#define MSG_SWITCH_PS_OFF "Switch Power Off"
|
|
#define MSG_EXTRUDE "Экструзия"
|
|
#define MSG_RETRACT "Откат"
|
|
#define MSG_MOVE_AXIS "Движение по осям"
|
|
#define MSG_MOVE_X "Move X"
|
|
#define MSG_MOVE_Y "Move Y"
|
|
#define MSG_MOVE_Z "Move Z"
|
|
#define MSG_MOVE_E "Extruder"
|
|
#define MSG_MOVE_E1 "Extruder2"
|
|
#define MSG_MOVE_E2 "Extruder3"
|
|
#define MSG_MOVE_01MM "Move 0.1mm"
|
|
#define MSG_MOVE_1MM "Move 1mm"
|
|
#define MSG_MOVE_10MM "Move 10mm"
|
|
#define MSG_SPEED "Скорость:"
|
|
#define MSG_NOZZLE "\002 Фильера:"
|
|
#define MSG_NOZZLE1 "\002 Фильера2:"
|
|
#define MSG_NOZZLE2 "\002 Фильера3:"
|
|
#define MSG_BED "\002 Кровать:"
|
|
#define MSG_FAN_SPEED "Куллер:"
|
|
#define MSG_FLOW "Поток:"
|
|
#define MSG_FLOW0 " Поток0:"
|
|
#define MSG_FLOW1 " Поток1:"
|
|
#define MSG_FLOW2 " Поток2:"
|
|
#define MSG_CONTROL "Настройки \003"
|
|
#define MSG_MIN "\002 Минимум:"
|
|
#define MSG_MAX "\002 Максимум:"
|
|
#define MSG_FACTOR "\002 Фактор:"
|
|
#define MSG_AUTOTEMP "Autotemp:"
|
|
#define MSG_ON "Вкл. "
|
|
#define MSG_OFF "Выкл. "
|
|
#define MSG_PID_P "PID-P: "
|
|
#define MSG_PID_I "PID-I: "
|
|
#define MSG_PID_D "PID-D: "
|
|
#define MSG_PID_C "PID-C: "
|
|
#define MSG_ACC "Acc:"
|
|
#define MSG_VXY_JERK "Vxy-jerk: "
|
|
#define MSG_VZ_JERK "Vz-jerk"
|
|
#define MSG_VE_JERK "Ve-jerk"
|
|
#define MSG_VMAX "Vmax "
|
|
#define MSG_X "x:"
|
|
#define MSG_Y "y:"
|
|
#define MSG_Z "z:"
|
|
#define MSG_E "e:"
|
|
#define MSG_VMIN "Vmin:"
|
|
#define MSG_VTRAV_MIN "VTrav min:"
|
|
#define MSG_AMAX "Amax "
|
|
#define MSG_A_RETRACT "A-retract:"
|
|
#define MSG_XSTEPS "X шаг/mm:"
|
|
#define MSG_YSTEPS "Y шаг/mm:"
|
|
#define MSG_ZSTEPS "Z шаг/mm:"
|
|
#define MSG_ESTEPS "E шаг/mm:"
|
|
#define MSG_RECTRACT "Откат подачи \x7E"
|
|
#define MSG_TEMPERATURE "Температура \x7E"
|
|
#define MSG_MOTION "Скорости \x7E"
|
|
#define MSG_CONTRAST "LCD contrast"
|
|
#define MSG_STORE_EPROM "Сохранить в EPROM"
|
|
#define MSG_LOAD_EPROM "Загруз. из EPROM"
|
|
#define MSG_RESTORE_FAILSAFE "Сброс настроек"
|
|
#define MSG_REFRESH "\004Обновить"
|
|
#define MSG_WATCH "Обзор \003"
|
|
#define MSG_PREPARE "Действия \x7E"
|
|
#define MSG_TUNE "Настройки \x7E"
|
|
#define MSG_PAUSE_PRINT "Продолжить печать"
|
|
#define MSG_RESUME_PRINT "возобн. печать"
|
|
#define MSG_STOP_PRINT "Остановить печать"
|
|
#define MSG_CARD_MENU "Меню карты \x7E"
|
|
#define MSG_NO_CARD "Нет карты"
|
|
#define MSG_DWELL "Сон..."
|
|
#define MSG_USERWAIT "Ожиданиие"
|
|
#define MSG_RESUMING "Resuming print"
|
|
#define MSG_NO_MOVE "Нет движения."
|
|
#define MSG_KILLED "УБИТО."
|
|
#define MSG_STOPPED "ОСТАНОВЛЕНО."
|
|
#define MSG_CONTROL_RETRACT "Откат mm:"
|
|
#define MSG_CONTROL_RETRACT_SWAP "своп Откат mm:"
|
|
#define MSG_CONTROL_RETRACTF "Откат V:"
|
|
#define MSG_CONTROL_RETRACT_ZLIFT "Прыжок mm:"
|
|
#define MSG_CONTROL_RETRACT_RECOVER "Возврат +mm:"
|
|
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "своп Возврат +mm:"
|
|
#define MSG_CONTROL_RETRACT_RECOVERF "Возврат V:"
|
|
#define MSG_AUTORETRACT "АвтоОткат:"
|
|
#define MSG_FILAMENTCHANGE "Change filament"
|
|
#define MSG_INIT_SDCARD "Init. SD-Card"
|
|
#define MSG_CNG_SDCARD "Change SD-Card"
|
|
#define MSG_ZPROBE_OUT "Z probe out. bed"
|
|
#define MSG_POSITION_UNKNOWN "Home X/Y before Z"
|
|
#define MSG_ZPROBE_ZOFFSET "Z Offset"
|
|
#define MSG_BABYSTEP_X "Babystep X"
|
|
#define MSG_BABYSTEP_Y "Babystep Y"
|
|
#define MSG_BABYSTEP_Z "Babystep Z"
|
|
#define MSG_ENDSTOP_ABORT "Endstop abort"
|
|
#define MSG_CONTRAST "Contrast"
|
|
|
|
// Serial Console Messages
|
|
|
|
#define MSG_Enqueing "Запланировано \""
|
|
#define MSG_POWERUP "Включение питания"
|
|
#define MSG_EXTERNAL_RESET " Внешний сброс"
|
|
#define MSG_BROWNOUT_RESET " Brown out сброс"
|
|
#define MSG_WATCHDOG_RESET " Watchdog сброс"
|
|
#define MSG_SOFTWARE_RESET " программный сброс"
|
|
#define MSG_AUTHOR " | Автор: "
|
|
#define MSG_CONFIGURATION_VER " Последнее обновление: "
|
|
#define MSG_FREE_MEMORY " Памяти свободно: "
|
|
#define MSG_PLANNER_BUFFER_BYTES " Буффер очереди команд Bytes: "
|
|
#define MSG_OK "ok"
|
|
#define MSG_FILE_SAVED "Файл записан."
|
|
#define MSG_ERR_LINE_NO "Номен строки это не последняя строка+1, последняя строка:"
|
|
#define MSG_ERR_CHECKSUM_MISMATCH "контрольная сумма не совпадает, последняя строка:"
|
|
#define MSG_ERR_NO_CHECKSUM "нет контрольной суммы для строки, последняя строка:"
|
|
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "нет строки для контрольной суммы, последняя строка:"
|
|
#define MSG_FILE_PRINTED "Печать файла завершена"
|
|
#define MSG_BEGIN_FILE_LIST "Список файлов"
|
|
#define MSG_END_FILE_LIST "Конец списка файлов"
|
|
#define MSG_M104_INVALID_EXTRUDER "M104 ошибка экструдера "
|
|
#define MSG_M105_INVALID_EXTRUDER "M105 ошибка экструдера "
|
|
#define MSG_M200_INVALID_EXTRUDER "M200 ошибка экструдера "
|
|
#define MSG_M218_INVALID_EXTRUDER "M218 ошибка экструдера "
|
|
#define MSG_M221_INVALID_EXTRUDER "M221 ошибка экструдера "
|
|
#define MSG_ERR_NO_THERMISTORS "Нет термистра - нет температуры"
|
|
#define MSG_M109_INVALID_EXTRUDER "M109 ошибка экструдера "
|
|
#define MSG_HEATING "Нагрев... "
|
|
#define MSG_HEATING_COMPLETE "Наргето. "
|
|
#define MSG_BED_HEATING "Нагрев стола... "
|
|
#define MSG_BED_DONE "Стол нагрет. "
|
|
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
|
|
#define MSG_COUNT_X " Count X:"
|
|
#define MSG_ERR_KILLED "Принтер остановлен. вызов kill() !!"
|
|
#define MSG_ERR_STOPPED "Ошибка принтера, останов. Устраните неисправность и используйте M999 для перезагрузки!. (Температура недоступна. Проверьте датчики)"
|
|
#define MSG_RESEND "Переотправка:"
|
|
#define MSG_UNKNOWN_COMMAND "Неизвестная команда:\""
|
|
#define MSG_ACTIVE_EXTRUDER "Активный экструдер: "
|
|
#define MSG_INVALID_EXTRUDER "Ошибка экструдера"
|
|
#define MSG_X_MIN "x_min:"
|
|
#define MSG_X_MAX "x_max:"
|
|
#define MSG_Y_MIN "y_min:"
|
|
#define MSG_Y_MAX "y_max:"
|
|
#define MSG_Z_MIN "z_min:"
|
|
#define MSG_Z_MAX "z_max:"
|
|
#define MSG_M119_REPORT "Статус концевиков"
|
|
#define MSG_ENDSTOP_HIT "Срабатывание концевика"
|
|
#define MSG_ENDSTOP_OPEN "Концевик освобожден"
|
|
#define MSG_HOTEND_OFFSET "Hotend offsets:"
|
|
#define MSG_SD_CANT_OPEN_SUBDIR "Не открыть папку"
|
|
#define MSG_SD_INIT_FAIL "Ошибка инициализации SD"
|
|
#define MSG_SD_VOL_INIT_FAIL "Ошибка инициализации раздела"
|
|
#define MSG_SD_OPENROOT_FAIL "Не прочесть содержимое корня"
|
|
#define MSG_SD_CARD_OK "SD карта в порядке"
|
|
#define MSG_SD_WORKDIR_FAIL "не открыть рабочую папку"
|
|
#define MSG_SD_OPEN_FILE_FAIL "Ошибка чтения, файл: "
|
|
#define MSG_SD_FILE_OPENED "Файл открыт:"
|
|
#define MSG_SD_SIZE " Размер:"
|
|
#define MSG_SD_FILE_SELECTED "Файл выбран"
|
|
#define MSG_SD_WRITE_TO_FILE "Запись в файл: "
|
|
#define MSG_SD_PRINTING_BYTE "SD печать byte "
|
|
#define MSG_SD_NOT_PRINTING "нет SD печати"
|
|
#define MSG_SD_ERR_WRITE_TO_FILE "ошибка записи в файл"
|
|
#define MSG_SD_CANT_ENTER_SUBDIR "Не зайти в папку:"
|
|
#define MSG_STEPPER_TOO_HIGH "Частота шагов очень высока : "
|
|
#define MSG_ENDSTOPS_HIT "концевик сработал: "
|
|
#define MSG_ERR_COLD_EXTRUDE_STOP " защита холодной экструзии"
|
|
#define MSG_ERR_LONG_EXTRUDE_STOP " защита превышения длинны экструзии"
|
|
#define MSG_BABYSTEPPING_X "Babystepping X"
|
|
#define MSG_BABYSTEPPING_Y "Babystepping Y"
|
|
#define MSG_BABYSTEPPING_Z "Babystepping Z"
|
|
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
|
|
|
|
#endif
|
|
|
|
|
|
#if LANGUAGE_CHOICE == 7
|
|
|
|
// LCD Menu Messages
|
|
// Please note these are limited to 17 characters!
|
|
|
|
#define WELCOME_MSG MACHINE_NAME " pronto."
|
|
#define MSG_SD_INSERTED "SD Card inserita"
|
|
#define MSG_SD_REMOVED "SD Card rimossa"
|
|
#define MSG_MAIN "Menu principale"
|
|
#define MSG_AUTOSTART "Autostart"
|
|
#define MSG_DISABLE_STEPPERS "Disabilita Motori"
|
|
#define MSG_AUTO_HOME "Auto Home"
|
|
#define MSG_SET_ORIGIN "Imposta Origine"
|
|
#define MSG_PREHEAT_PLA "Preriscalda PLA"
|
|
#define MSG_PREHEAT_PLA0 "Preriscalda PLA 1"
|
|
#define MSG_PREHEAT_PLA1 "Preriscalda PLA 2"
|
|
#define MSG_PREHEAT_PLA2 "Preriscalda PLA 3"
|
|
#define MSG_PREHEAT_PLA012 "Preris. PLA Tutto"
|
|
#define MSG_PREHEAT_PLA_BEDONLY "Preri. PLA Piatto"
|
|
#define MSG_PREHEAT_PLA_SETTINGS "Preris. PLA Conf"
|
|
#define MSG_PREHEAT_ABS "Preriscalda ABS"
|
|
#define MSG_PREHEAT_ABS0 "Preriscalda ABS 1"
|
|
#define MSG_PREHEAT_ABS1 "Preriscalda ABS 2"
|
|
#define MSG_PREHEAT_ABS2 "Preriscalda ABS 3"
|
|
#define MSG_PREHEAT_ABS012 "Preris. ABS Tutto"
|
|
#define MSG_PREHEAT_ABS_BEDONLY "Preri. ABS Piatto"
|
|
#define MSG_PREHEAT_ABS_SETTINGS "Preris. ABS Conf"
|
|
#define MSG_COOLDOWN "Raffredda"
|
|
#define MSG_SWITCH_PS_ON "Switch Power On"
|
|
#define MSG_SWITCH_PS_OFF "Switch Power Off"
|
|
#define MSG_EXTRUDE "Estrudi"
|
|
#define MSG_RETRACT "Ritrai"
|
|
#define MSG_MOVE_AXIS "Muovi Asse"
|
|
#define MSG_MOVE_X "Move X"
|
|
#define MSG_MOVE_Y "Move Y"
|
|
#define MSG_MOVE_Z "Move Z"
|
|
#define MSG_MOVE_E "Extruder"
|
|
#define MSG_MOVE_E1 "Extruder2"
|
|
#define MSG_MOVE_E2 "Extruder3"
|
|
#define MSG_MOVE_01MM "Move 0.1mm"
|
|
#define MSG_MOVE_1MM "Move 1mm"
|
|
#define MSG_MOVE_10MM "Move 10mm"
|
|
#define MSG_SPEED "Velcità"
|
|
#define MSG_NOZZLE "Ugello"
|
|
#define MSG_NOZZLE1 "Ugello2"
|
|
#define MSG_NOZZLE2 "Ugello3"
|
|
#define MSG_BED "Piatto"
|
|
#define MSG_FAN_SPEED "Ventola"
|
|
#define MSG_FLOW "Flusso"
|
|
#define MSG_FLOW0 "Flusso 0"
|
|
#define MSG_FLOW1 "Flusso 1"
|
|
#define MSG_FLOW2 "Flusso 2"
|
|
#define MSG_CONTROL "Controllo"
|
|
#define MSG_MIN " \002 Min:"
|
|
#define MSG_MAX " \002 Max:"
|
|
#define MSG_FACTOR " \002 Fact:"
|
|
#define MSG_AUTOTEMP "Autotemp"
|
|
#define MSG_ON "On "
|
|
#define MSG_OFF "Off"
|
|
#define MSG_PID_P "PID-P"
|
|
#define MSG_PID_I "PID-I"
|
|
#define MSG_PID_D "PID-D"
|
|
#define MSG_PID_C "PID-C"
|
|
#define MSG_ACC "Accel"
|
|
#define MSG_VXY_JERK "Vxy-jerk"
|
|
#define MSG_VZ_JERK "Vz-jerk"
|
|
#define MSG_VE_JERK "Ve-jerk"
|
|
#define MSG_VMAX "Vmax"
|
|
#define MSG_X "x"
|
|
#define MSG_Y "y"
|
|
#define MSG_Z "z"
|
|
#define MSG_E "e"
|
|
#define MSG_VMIN "Vmin"
|
|
#define MSG_VTRAV_MIN "VTrav min"
|
|
#define MSG_AMAX "Amax"
|
|
#define MSG_A_RETRACT "A-retract"
|
|
#define MSG_XSTEPS "Xpassi/mm"
|
|
#define MSG_YSTEPS "Ypassi/mm"
|
|
#define MSG_ZSTEPS "Zpassi/mm"
|
|
#define MSG_ESTEPS "Epassi/mm"
|
|
#define MSG_RECTRACT "Ritrai"
|
|
#define MSG_TEMPERATURE "Temperatura"
|
|
#define MSG_MOTION "Movimento"
|
|
#define MSG_CONTRAST "LCD contrast"
|
|
#define MSG_STORE_EPROM "Salva in EEPROM"
|
|
#define MSG_LOAD_EPROM "Carica da EEPROM"
|
|
#define MSG_RESTORE_FAILSAFE "Impostaz. default"
|
|
#define MSG_REFRESH "Aggiorna"
|
|
#define MSG_WATCH "Guarda"
|
|
#define MSG_PREPARE "Prepara"
|
|
#define MSG_TUNE "Adatta"
|
|
#define MSG_PAUSE_PRINT "Pausa"
|
|
#define MSG_RESUME_PRINT "Riprendi Stampa"
|
|
#define MSG_STOP_PRINT "Arresta Stampa"
|
|
#define MSG_CARD_MENU "SD Card Menu"
|
|
#define MSG_NO_CARD "No SD Card"
|
|
#define MSG_DWELL "Sospensione..."
|
|
#define MSG_USERWAIT "Attendi Utente..."
|
|
#define MSG_RESUMING "Riprendi Stampa"
|
|
#define MSG_NO_MOVE "Nessun Movimento."
|
|
#define MSG_KILLED "UCCISO. "
|
|
#define MSG_STOPPED "ARRESTATO. "
|
|
#define MSG_CONTROL_RETRACT "Ritrai mm"
|
|
#define MSG_CONTROL_RETRACT_SWAP "Scamb. Ritrai mm"
|
|
#define MSG_CONTROL_RETRACTF "Ritrai V"
|
|
#define MSG_CONTROL_RETRACT_ZLIFT "Salta mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Scamb. UnRet +mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"
|
|
#define MSG_AUTORETRACT "AutoArretramento"
|
|
#define MSG_FILAMENTCHANGE "Cambia filamento"
|
|
#define MSG_INIT_SDCARD "Iniz. SD-Card"
|
|
#define MSG_CNG_SDCARD "Cambia SD-Card"
|
|
#define MSG_ZPROBE_OUT "Z probe out. bed"
|
|
#define MSG_POSITION_UNKNOWN "Home X/Y before Z"
|
|
#define MSG_ZPROBE_ZOFFSET "Z Offset"
|
|
#define MSG_BABYSTEP_X "Babystep X"
|
|
#define MSG_BABYSTEP_Y "Babystep Y"
|
|
#define MSG_BABYSTEP_Z "Babystep Z"
|
|
#define MSG_ENDSTOP_ABORT "Endstop abort"
|
|
#define MSG_CONTRAST "Contrast"
|
|
|
|
// Serial Console Messages
|
|
|
|
#define MSG_Enqueing "accodamento \""
|
|
#define MSG_POWERUP "Accensione"
|
|
#define MSG_EXTERNAL_RESET " Reset Esterno"
|
|
#define MSG_BROWNOUT_RESET " Brown out Reset"
|
|
#define MSG_WATCHDOG_RESET " Watchdog Reset"
|
|
#define MSG_SOFTWARE_RESET " Software Reset"
|
|
#define MSG_AUTHOR " | Autore: "
|
|
#define MSG_CONFIGURATION_VER " Ultimo Aggiornamento: "
|
|
#define MSG_FREE_MEMORY " Memoria Libera: "
|
|
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
|
|
#define MSG_OK "ok"
|
|
#define MSG_FILE_SAVED "File Salvato."
|
|
#define MSG_ERR_LINE_NO "Il Numero della Linea non corrisponde al Numero dell'Ultima Linea+1, Ultima Linea: "
|
|
#define MSG_ERR_CHECKSUM_MISMATCH "checksum non corrispondente, Ultima Linea: "
|
|
#define MSG_ERR_NO_CHECKSUM "Nessun Checksum con Numero di Linea, Ultima Linea: "
|
|
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Nessun Numero di Linea con Checksum, Ultima Linea: "
|
|
#define MSG_FILE_PRINTED "File stampato"
|
|
#define MSG_BEGIN_FILE_LIST "Inizio Lista File"
|
|
#define MSG_END_FILE_LIST "Fine Lista File"
|
|
#define MSG_M104_INVALID_EXTRUDER "M104 Estrusore non valido "
|
|
#define MSG_M105_INVALID_EXTRUDER "M105 Estrusore non valido "
|
|
#define MSG_M200_INVALID_EXTRUDER "M200 Estrusore non valido "
|
|
#define MSG_M218_INVALID_EXTRUDER "M218 Estrusore non valido "
|
|
#define MSG_M221_INVALID_EXTRUDER "M221 Estrusore non valido "
|
|
#define MSG_ERR_NO_THERMISTORS "Nessun Termistore - nessuna temperatura"
|
|
#define MSG_M109_INVALID_EXTRUDER "M109 Estrusore non valido "
|
|
#define MSG_HEATING "Riscaldamento..."
|
|
#define MSG_HEATING_COMPLETE "Stampante Calda."
|
|
#define MSG_BED_HEATING "Riscaldamento Piatto."
|
|
#define MSG_BED_DONE "Piatto Pronto."
|
|
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
|
|
#define MSG_COUNT_X " Calcola X: "
|
|
#define MSG_ERR_KILLED "Stampante Calda. kill() chiamata !!"
|
|
#define MSG_ERR_STOPPED "Stampante fermata a causa di errori. Risolvi l'errore e usa M999 per ripartire!. (Reset temperatura. Impostala prima di ripartire)"
|
|
#define MSG_RESEND "Reinviato:"
|
|
#define MSG_UNKNOWN_COMMAND "Comando sconosciuto: \""
|
|
#define MSG_ACTIVE_EXTRUDER "Attiva Estrusore: "
|
|
#define MSG_INVALID_EXTRUDER "Estrusore non valido"
|
|
#define MSG_X_MIN "x_min: "
|
|
#define MSG_X_MAX "x_max: "
|
|
#define MSG_Y_MIN "y_min: "
|
|
#define MSG_Y_MAX "y_max: "
|
|
#define MSG_Z_MIN "z_min: "
|
|
#define MSG_Z_MAX "z_max: "
|
|
#define MSG_M119_REPORT "Segnalazione stato degli endstop"
|
|
#define MSG_ENDSTOP_HIT "INNESCATO"
|
|
#define MSG_ENDSTOP_OPEN "aperto"
|
|
#define MSG_HOTEND_OFFSET "Hotend offsets:"
|
|
|
|
#define MSG_SD_CANT_OPEN_SUBDIR "Impossibile aprire sottocartella"
|
|
#define MSG_SD_INIT_FAIL "Fallita Inizializzazione SD"
|
|
#define MSG_SD_VOL_INIT_FAIL "Fallito il montaggio del Volume"
|
|
#define MSG_SD_OPENROOT_FAIL "Fallita l'apertura Cartella Principale"
|
|
#define MSG_SD_CARD_OK "SD card ok"
|
|
#define MSG_SD_WORKDIR_FAIL "Fallita l'apertura Cartella di Lavoro"
|
|
#define MSG_SD_OPEN_FILE_FAIL "Fallita l'apertura del File: "
|
|
#define MSG_SD_FILE_OPENED "File aperto: "
|
|
#define MSG_SD_SIZE " Dimensione: "
|
|
#define MSG_SD_FILE_SELECTED "File selezionato"
|
|
#define MSG_SD_WRITE_TO_FILE "Scrittura su file: "
|
|
#define MSG_SD_PRINTING_BYTE "Si sta scrivendo il byte su SD "
|
|
#define MSG_SD_NOT_PRINTING "Non si sta scrivendo su SD"
|
|
#define MSG_SD_ERR_WRITE_TO_FILE "Errore nella scrittura su file"
|
|
#define MSG_SD_CANT_ENTER_SUBDIR "Impossibile entrare nella sottocartella: "
|
|
|
|
#define MSG_STEPPER_TOO_HIGH "Steprate troppo alto: "
|
|
#define MSG_ENDSTOPS_HIT "Raggiunto il fondo carrello: "
|
|
#define MSG_ERR_COLD_EXTRUDE_STOP " prevenuta estrusione fredda"
|
|
#define MSG_ERR_LONG_EXTRUDE_STOP " prevenuta estrusione troppo lunga"
|
|
#define MSG_BABYSTEPPING_X "Babystepping X"
|
|
#define MSG_BABYSTEPPING_Y "Babystepping Y"
|
|
#define MSG_BABYSTEPPING_Z "Babystepping Z"
|
|
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Qualcosa non va in MenuStructure."
|
|
|
|
#endif
|
|
|
|
|
|
#if LANGUAGE_CHOICE == 8
|
|
|
|
// LCD Menu Messages
|
|
// Please note these are limited to 17 characters!
|
|
|
|
#define WELCOME_MSG MACHINE_NAME " pronto."
|
|
#define MSG_SD_INSERTED "Cartao inserido"
|
|
#define MSG_SD_REMOVED "Cartao removido"
|
|
#define MSG_MAIN " Menu principal \003"
|
|
#define MSG_AUTOSTART "Autostart"
|
|
#define MSG_DISABLE_STEPPERS " Apagar motores"
|
|
#define MSG_AUTO_HOME "Ir para origen"
|
|
#define MSG_SET_ORIGIN "Estabelecer orig."
|
|
#define MSG_PREHEAT_PLA "Pre-aquecer PLA"
|
|
#define MSG_PREHEAT_PLA0 " pre-aquecer PLA 1"
|
|
#define MSG_PREHEAT_PLA1 " pre-aquecer PLA 2"
|
|
#define MSG_PREHEAT_PLA2 " pre-aquecer PLA 3"
|
|
#define MSG_PREHEAT_PLA012 " pre-aq. PLA Tudo"
|
|
#define MSG_PREHEAT_PLA_BEDONLY " pre-aq. PLA \002Base"
|
|
#define MSG_PREHEAT_PLA_SETTINGS "PLA setting"
|
|
#define MSG_PREHEAT_ABS "Pre-aquecer ABS"
|
|
#define MSG_PREHEAT_ABS0 " pre-aquecer ABS 1"
|
|
#define MSG_PREHEAT_ABS1 " pre-aquecer ABS 2"
|
|
#define MSG_PREHEAT_ABS2 " pre-aquecer ABS 3"
|
|
#define MSG_PREHEAT_ABS012 " pre-aq. ABS Tudo"
|
|
#define MSG_PREHEAT_ABS_BEDONLY " pre-aq. ABS \002Base"
|
|
#define MSG_PREHEAT_ABS_SETTINGS "ABS setting"
|
|
#define MSG_COOLDOWN "Esfriar"
|
|
#define MSG_SWITCH_PS_ON "Switch Power On"
|
|
#define MSG_SWITCH_PS_OFF "Switch Power Off"
|
|
#define MSG_EXTRUDE "Extrudar"
|
|
#define MSG_RETRACT "Retrair"
|
|
#define MSG_PREHEAT_PLA "Pre-aquecer PLA"
|
|
#define MSG_PREHEAT_ABS "Pre-aquecer ABS"
|
|
#define MSG_MOVE_AXIS "Mover eixo \x7E"
|
|
#define MSG_MOVE_X "Move X"
|
|
#define MSG_MOVE_Y "Move Y"
|
|
#define MSG_MOVE_Z "Move Z"
|
|
#define MSG_MOVE_E "Extruder"
|
|
#define MSG_MOVE_E1 "Extruder2"
|
|
#define MSG_MOVE_E2 "Extruder3"
|
|
#define MSG_MOVE_01MM "Move 0.1mm"
|
|
#define MSG_MOVE_1MM "Move 1mm"
|
|
#define MSG_MOVE_10MM "Move 10mm"
|
|
#define MSG_SPEED "Velocidade:"
|
|
#define MSG_NOZZLE "\002Nozzle:"
|
|
#define MSG_NOZZLE1 "\002Nozzle2:"
|
|
#define MSG_NOZZLE2 "\002Nozzle3:"
|
|
#define MSG_BED "\002Base:"
|
|
#define MSG_FAN_SPEED "Velocidade vento."
|
|
#define MSG_FLOW "Fluxo:"
|
|
#define MSG_FLOW0 "Fluxo0:"
|
|
#define MSG_FLOW1 "Fluxo1:"
|
|
#define MSG_FLOW2 "Fluxo2:"
|
|
#define MSG_CONTROL "Controle \003"
|
|
#define MSG_MIN "\002 Min:"
|
|
#define MSG_MAX "\002 Max:"
|
|
#define MSG_FACTOR "\002 Fact:"
|
|
#define MSG_AUTOTEMP "Autotemp:"
|
|
#define MSG_ON "On "
|
|
#define MSG_OFF "Off"
|
|
#define MSG_PID_P "PID-P: "
|
|
#define MSG_PID_I "PID-I: "
|
|
#define MSG_PID_D "PID-D: "
|
|
#define MSG_PID_C "PID-C: "
|
|
#define MSG_ACC "Acc:"
|
|
#define MSG_VXY_JERK "Vxy-jerk: "
|
|
#define MSG_VZ_JERK "Vz-jerk"
|
|
#define MSG_VE_JERK "Ve-jerk"
|
|
#define MSG_VMAX " Vmax "
|
|
#define MSG_X "x:"
|
|
#define MSG_Y "y:"
|
|
#define MSG_Z "z:"
|
|
#define MSG_E "e:"
|
|
#define MSG_VMIN "Vmin:"
|
|
#define MSG_VTRAV_MIN "VTrav min:"
|
|
#define MSG_AMAX "Amax "
|
|
#define MSG_A_RETRACT "A-retract:"
|
|
#define MSG_XSTEPS "Xpasso/mm:"
|
|
#define MSG_YSTEPS "Ypasso/mm:"
|
|
#define MSG_ZSTEPS "Zpasso/mm:"
|
|
#define MSG_ESTEPS "Epasso/mm:"
|
|
#define MSG_MAIN_WIDE "Menu Principal \003"
|
|
#define MSG_RECTRACT "Retrair"
|
|
#define MSG_TEMPERATURE "Temperatura"
|
|
#define MSG_MOTION "Movimento"
|
|
#define MSG_STORE_EPROM "Guardar memoria"
|
|
#define MSG_LOAD_EPROM "Carregar memoria"
|
|
#define MSG_RESTORE_FAILSAFE "Rest. de emergen."
|
|
#define MSG_REFRESH "\004Recarregar"
|
|
#define MSG_WATCH "Monitorar \003"
|
|
#define MSG_PREPARE "Preparar \x7E"
|
|
#define MSG_PREPARE_ALT "Preparar \003"
|
|
#define MSG_CONTROL_ARROW "Controle \x7E"
|
|
#define MSG_RETRACT_ARROW "Retrair \x7E"
|
|
#define MSG_TUNE "Tune \x7E"
|
|
#define MSG_PAUSE_PRINT "Pausar impressao"
|
|
#define MSG_RESUME_PRINT "Resumir impressao"
|
|
#define MSG_STOP_PRINT "Parar impressao"
|
|
#define MSG_CARD_MENU "Menu cartao SD"
|
|
#define MSG_NO_CARD "Sem cartao SD"
|
|
#define MSG_DWELL "Repouso..."
|
|
#define MSG_USERWAIT "Esperando ordem"
|
|
#define MSG_RESUMING "Resuming print"
|
|
#define MSG_NO_MOVE "Sem movimento"
|
|
#define MSG_KILLED "PARADA DE EMERG."
|
|
#define MSG_STOPPED "PARADA. "
|
|
#define MSG_STEPPER_RELEASED "Lancado."
|
|
#define MSG_CONTROL_RETRACT " Retrair mm:"
|
|
#define MSG_CONTROL_RETRACT_SWAP "Troca Retrair mm:"
|
|
#define MSG_CONTROL_RETRACTF " Retrair V:"
|
|
#define MSG_CONTROL_RETRACT_ZLIFT " Levantar mm:"
|
|
#define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm:"
|
|
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Troca DesRet +mm:"
|
|
#define MSG_CONTROL_RETRACT_RECOVERF " DesRet V:"
|
|
#define MSG_AUTORETRACT " AutoRetr.:"
|
|
#define MSG_FILAMENTCHANGE "Change filament"
|
|
#define MSG_INIT_SDCARD "Init. SD-Card"
|
|
#define MSG_CNG_SDCARD "Change SD-Card"
|
|
#define MSG_ZPROBE_OUT "Son. fora da mesa"
|
|
#define MSG_POSITION_UNKNOWN "XY antes de Z"
|
|
#define MSG_ZPROBE_ZOFFSET "Z Offset"
|
|
#define MSG_BABYSTEP_X "Babystep X"
|
|
#define MSG_BABYSTEP_Y "Babystep Y"
|
|
#define MSG_BABYSTEP_Z "Babystep Z"
|
|
#define MSG_ENDSTOP_ABORT "Endstop abort"
|
|
#define MSG_CONTRAST "Contrast"
|
|
|
|
// Serial Console Messages
|
|
|
|
#define MSG_Enqueing "enqueing \""
|
|
#define MSG_POWERUP "PowerUp"
|
|
#define MSG_EXTERNAL_RESET " Reset Externo"
|
|
#define MSG_BROWNOUT_RESET " Reset por voltagem incorreta"
|
|
#define MSG_WATCHDOG_RESET " Reset por Bloqueio"
|
|
#define MSG_SOFTWARE_RESET " Reset por Software"
|
|
#define MSG_AUTHOR " | Author: "
|
|
#define MSG_CONFIGURATION_VER " Ultima atualizacao: "
|
|
#define MSG_FREE_MEMORY " memoria Livre: "
|
|
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
|
|
#define MSG_OK "ok"
|
|
#define MSG_FILE_SAVED "Guardado."
|
|
#define MSG_ERR_LINE_NO "O Numero da linha Nao e igual ao ultimo Numero da linha+1, Ultima linha:"
|
|
#define MSG_ERR_CHECKSUM_MISMATCH "O checksum Nao coincide, Ultima linha:"
|
|
#define MSG_ERR_NO_CHECKSUM "Nao foi possivel encontrar o checksum com o numero da linha, Ultima linha :"
|
|
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Nao ha o numero da linha com o checksum, Ultima linha:"
|
|
#define MSG_FILE_PRINTED "Impressao terminada"
|
|
#define MSG_BEGIN_FILE_LIST "Começo da lista de arquivos"
|
|
#define MSG_END_FILE_LIST "Fim da lista de arquivos"
|
|
#define MSG_M104_INVALID_EXTRUDER "M104 Extrusor inválido "
|
|
#define MSG_M105_INVALID_EXTRUDER "M105 Extrusor inválido "
|
|
#define MSG_M200_INVALID_EXTRUDER "M200 Extrusor inválido "
|
|
#define MSG_M218_INVALID_EXTRUDER "M218 Extrusor inválido "
|
|
#define MSG_M221_INVALID_EXTRUDER "M221 Extrusor inválido "
|
|
#define MSG_ERR_NO_THERMISTORS "Nao ha termistor - no temp"
|
|
#define MSG_M109_INVALID_EXTRUDER "M109 Extrusor inválido "
|
|
#define MSG_HEATING "Aquecendo..."
|
|
#define MSG_HEATING_COMPLETE "Aquecido."
|
|
#define MSG_BED_HEATING "Aquecendo a Base."
|
|
#define MSG_BED_DONE "Base quente."
|
|
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
|
|
#define MSG_COUNT_X " Conta X:"
|
|
#define MSG_ERR_KILLED "Impressora parada com kill() !!"
|
|
#define MSG_ERR_STOPPED "Impressora parada por erros. Coserte o erro e use M999 para recomeçar!. (Temperatura reiniciada. Ajuste antes de recomeçar)"
|
|
#define MSG_RESEND "Reenviar:"
|
|
#define MSG_UNKNOWN_COMMAND "Comando desconhecido:\""
|
|
#define MSG_ACTIVE_EXTRUDER "Extrusor ativo: "
|
|
#define MSG_INVALID_EXTRUDER "Extrusor invalido"
|
|
#define MSG_X_MIN "x_min: "
|
|
#define MSG_X_MAX "x_max: "
|
|
#define MSG_Y_MIN "y_min: "
|
|
#define MSG_Y_MAX "y_max: "
|
|
#define MSG_Z_MIN "z_min: "
|
|
#define MSG_Z_MAX "z_max: "
|
|
#define MSG_M119_REPORT "Relatando estado do ponto final"
|
|
#define MSG_ENDSTOP_HIT "PULSADO"
|
|
#define MSG_ENDSTOP_OPEN "Aberto"
|
|
#define MSG_HOTEND_OFFSET "Hotend offsets:"
|
|
|
|
#define MSG_SD_CANT_OPEN_SUBDIR "Nao pode abrir sub diretorio"
|
|
#define MSG_SD_INIT_FAIL "Falha ao iniciar SD"
|
|
#define MSG_SD_VOL_INIT_FAIL "Falha ao montar volume"
|
|
#define MSG_SD_OPENROOT_FAIL "Falha ao abrir diretorio raiz"
|
|
#define MSG_SD_CARD_OK "cartao SD ok"
|
|
#define MSG_SD_WORKDIR_FAIL "Falha ao abrir diretorio de trabalho"
|
|
#define MSG_SD_OPEN_FILE_FAIL "Erro ao abrir, Arquivo: "
|
|
#define MSG_SD_FILE_OPENED "Arquivo aberto:"
|
|
#define MSG_SD_SIZE " Size:"
|
|
#define MSG_SD_FILE_SELECTED "Arquivo selecionado"
|
|
#define MSG_SD_WRITE_TO_FILE "Escrevendo no arquivo: "
|
|
#define MSG_SD_PRINTING_BYTE "SD imprimindo o byte "
|
|
#define MSG_SD_NOT_PRINTING "Nao esta se imprimindo com o SD"
|
|
#define MSG_SD_ERR_WRITE_TO_FILE "Erro ao escrever no arquivo"
|
|
#define MSG_SD_CANT_ENTER_SUBDIR "Nao pode abrir o sub diretorio:"
|
|
|
|
#define MSG_STEPPER_TOO_HIGH "Steprate muito alto : "
|
|
#define MSG_ENDSTOPS_HIT "O ponto final foi tocado: "
|
|
#define MSG_ERR_COLD_EXTRUDE_STOP " Extrusao a frio evitada"
|
|
#define MSG_ERR_LONG_EXTRUDE_STOP " Extrusao muito larga evitada"
|
|
#define MSG_BABYSTEPPING_X "Babystepping X"
|
|
#define MSG_BABYSTEPPING_Y "Babystepping Y"
|
|
#define MSG_BABYSTEPPING_Z "Babystepping Z"
|
|
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Algo esta errado na estrutura do Menu."
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#if LANGUAGE_CHOICE == 9
|
|
|
|
// LCD Menu Messages
|
|
// Please note these are limited to 17 characters!
|
|
|
|
#define WELCOME_MSG MACHINE_NAME " valmis."
|
|
#define MSG_SD_INSERTED "Kortti asetettu"
|
|
#define MSG_SD_REMOVED "Kortti poistettu"
|
|
#define MSG_MAIN "Palaa"
|
|
#define MSG_AUTOSTART "Automaatti"
|
|
#define MSG_DISABLE_STEPPERS "Vapauta moottorit"
|
|
#define MSG_AUTO_HOME "Aja referenssiin"
|
|
#define MSG_SET_ORIGIN "Aseta origo"
|
|
#define MSG_PREHEAT_PLA "Esilammita PLA"
|
|
#define MSG_PREHEAT_PLA0 "Esilammita PLA 1"
|
|
#define MSG_PREHEAT_PLA1 "Esilammita PLA 2"
|
|
#define MSG_PREHEAT_PLA2 "Esilammita PLA 3"
|
|
#define MSG_PREHEAT_PLA012 "Esila. PLA Kaikki"
|
|
#define MSG_PREHEAT_PLA_BEDONLY "Esila. PLA Alusta"
|
|
#define MSG_PREHEAT_PLA_SETTINGS "Esilamm. PLA konf"
|
|
#define MSG_PREHEAT_ABS "Esilammita ABS"
|
|
#define MSG_PREHEAT_ABS0 "Esilammita ABS 1"
|
|
#define MSG_PREHEAT_ABS1 "Esilammita ABS 2"
|
|
#define MSG_PREHEAT_ABS2 "Esilammita ABS 3"
|
|
#define MSG_PREHEAT_ABS012 "Esila. ABS Kaikki"
|
|
#define MSG_PREHEAT_ABS_BEDONLY "Esila. ABS Alusta"
|
|
#define MSG_PREHEAT_ABS_SETTINGS "Esilamm. ABS konf"
|
|
#define MSG_COOLDOWN "Jaahdyta"
|
|
#define MSG_SWITCH_PS_ON "Virta paalle"
|
|
#define MSG_SWITCH_PS_OFF "Virta pois"
|
|
#define MSG_EXTRUDE "Pursota"
|
|
#define MSG_RETRACT "Veda takaisin"
|
|
#define MSG_MOVE_AXIS "Liikuta akseleita"
|
|
#define MSG_MOVE_X "Move X"
|
|
#define MSG_MOVE_Y "Move Y"
|
|
#define MSG_MOVE_Z "Move Z"
|
|
#define MSG_MOVE_E "Extruder"
|
|
#define MSG_MOVE_E1 "Extruder2"
|
|
#define MSG_MOVE_E2 "Extruder3"
|
|
#define MSG_MOVE_01MM "Move 0.1mm"
|
|
#define MSG_MOVE_1MM "Move 1mm"
|
|
#define MSG_MOVE_10MM "Move 10mm"
|
|
#define MSG_SPEED "Nopeus"
|
|
#define MSG_NOZZLE "Suutin"
|
|
#define MSG_NOZZLE1 "Suutin2"
|
|
#define MSG_NOZZLE2 "Suutin3"
|
|
#define MSG_BED "Alusta"
|
|
#define MSG_FAN_SPEED "Tuul. nopeus"
|
|
#define MSG_FLOW "Virtaus"
|
|
#define MSG_FLOW0 "Virtaus 0"
|
|
#define MSG_FLOW1 "Virtaus 1"
|
|
#define MSG_FLOW2 "Virtaus 2"
|
|
#define MSG_CONTROL "Kontrolli"
|
|
#define MSG_MIN " \002 Min"
|
|
#define MSG_MAX " \002 Max"
|
|
#define MSG_FACTOR " \002 Kerr"
|
|
#define MSG_AUTOTEMP "Autotemp"
|
|
#define MSG_ON "On "
|
|
#define MSG_OFF "Off"
|
|
#define MSG_PID_P "PID-P"
|
|
#define MSG_PID_I "PID-I"
|
|
#define MSG_PID_D "PID-D"
|
|
#define MSG_PID_C "PID-C"
|
|
#define MSG_ACC "Kiihtyv"
|
|
#define MSG_VXY_JERK "Vxy-jerk"
|
|
#define MSG_VZ_JERK "Vz-jerk"
|
|
#define MSG_VE_JERK "Ve-jerk"
|
|
#define MSG_VMAX "Vmax "
|
|
#define MSG_X "x"
|
|
#define MSG_Y "y"
|
|
#define MSG_Z "z"
|
|
#define MSG_E "e"
|
|
#define MSG_VMIN "Vmin"
|
|
#define MSG_VTRAV_MIN "VLiike min"
|
|
#define MSG_AMAX "Amax "
|
|
#define MSG_A_RETRACT "A-peruuta"
|
|
#define MSG_XSTEPS "Xsteps/mm"
|
|
#define MSG_YSTEPS "Ysteps/mm"
|
|
#define MSG_ZSTEPS "Zsteps/mm"
|
|
#define MSG_ESTEPS "Esteps/mm"
|
|
#define MSG_RECTRACT "Veda takaisin"
|
|
#define MSG_TEMPERATURE "Lampotila"
|
|
#define MSG_MOTION "Liike"
|
|
#define MSG_CONTRAST "LCD contrast"
|
|
#define MSG_STORE_EPROM "Tallenna muistiin"
|
|
#define MSG_LOAD_EPROM "Lataa muistista"
|
|
#define MSG_RESTORE_FAILSAFE "Palauta oletus"
|
|
#define MSG_REFRESH "Paivita"
|
|
#define MSG_WATCH "Seuraa"
|
|
#define MSG_PREPARE "Valmistele"
|
|
#define MSG_TUNE "Saada"
|
|
#define MSG_PAUSE_PRINT "Keskeyta tulostus"
|
|
#define MSG_RESUME_PRINT "Jatka tulostusta"
|
|
#define MSG_STOP_PRINT "Pysayta tulostus"
|
|
#define MSG_CARD_MENU "Korttivalikko"
|
|
#define MSG_NO_CARD "Ei korttia"
|
|
#define MSG_DWELL "Nukkumassa..."
|
|
#define MSG_USERWAIT "Odotet. valintaa"
|
|
#define MSG_RESUMING "Jatke. tulostusta"
|
|
#define MSG_NO_MOVE "Ei liiketta."
|
|
#define MSG_KILLED "KILLED. "
|
|
#define MSG_STOPPED "STOPPED. "
|
|
#define MSG_CONTROL_RETRACT "Veda mm"
|
|
#define MSG_CONTROL_RETRACT_SWAP "Va. Veda mm"
|
|
#define MSG_CONTROL_RETRACTF "Veda V"
|
|
#define MSG_CONTROL_RETRACT_ZLIFT "Z mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Va. UnRet +mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"
|
|
#define MSG_AUTORETRACT "AutoVeto."
|
|
#define MSG_FILAMENTCHANGE "Change filament"
|
|
#define MSG_INIT_SDCARD "Init. SD-Card"
|
|
#define MSG_CNG_SDCARD "Change SD-Card"
|
|
#define MSG_ZPROBE_OUT "Z probe out. bed"
|
|
#define MSG_POSITION_UNKNOWN "Home X/Y before Z"
|
|
#define MSG_ZPROBE_ZOFFSET "Z Offset"
|
|
#define MSG_BABYSTEP_X "Babystep X"
|
|
#define MSG_BABYSTEP_Y "Babystep Y"
|
|
#define MSG_BABYSTEP_Z "Babystep Z"
|
|
#define MSG_ENDSTOP_ABORT "Endstop abort"
|
|
|
|
// Serial Console Messages
|
|
|
|
#define MSG_Enqueing "jonoon \""
|
|
#define MSG_POWERUP "Kaynnistys"
|
|
#define MSG_EXTERNAL_RESET " Ulkoinen Reset"
|
|
#define MSG_BROWNOUT_RESET " Alajannite Reset"
|
|
#define MSG_WATCHDOG_RESET " Vahtikoira Reset"
|
|
#define MSG_SOFTWARE_RESET " Ohjelmisto Reset"
|
|
#define MSG_AUTHOR " | Author: "
|
|
#define MSG_CONFIGURATION_VER " Paivitetty viimeksi: "
|
|
#define MSG_FREE_MEMORY " Vapaata muistia: "
|
|
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
|
|
#define MSG_OK "ok"
|
|
#define MSG_FILE_SAVED "Tiedosto tallennettu."
|
|
#define MSG_ERR_LINE_NO "Rivinumero ei ole Viimeisin rivi+1, Viimeisin rivi: "
|
|
#define MSG_ERR_CHECKSUM_MISMATCH "Tarkistesummassa virhe, Viimeisin rivi: "
|
|
#define MSG_ERR_NO_CHECKSUM "Rivilla ei tarkistesummaa, Viimeisin rivi: "
|
|
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Ei rivinumeroa tarkistesumman kanssa, Viimeisin rivi: "
|
|
#define MSG_FILE_PRINTED "Tiedoston tulostus valmis"
|
|
#define MSG_BEGIN_FILE_LIST "Tiedostolistauksen alku"
|
|
#define MSG_END_FILE_LIST "Tiedostolistauksen loppu"
|
|
#define MSG_M104_INVALID_EXTRUDER "M104 Virheellinen suutin "
|
|
#define MSG_M105_INVALID_EXTRUDER "M105 Virheellinen suutin "
|
|
#define MSG_M200_INVALID_EXTRUDER "M200 Virheellinen suutin "
|
|
#define MSG_M218_INVALID_EXTRUDER "M218 Virheellinen suutin "
|
|
#define MSG_M221_INVALID_EXTRUDER "M221 Virheellinen suutin "
|
|
#define MSG_ERR_NO_THERMISTORS "Ei termistoreja - ei lampotiloja"
|
|
#define MSG_M109_INVALID_EXTRUDER "M109 Virheellinen suutin "
|
|
#define MSG_HEATING "Lammitan..."
|
|
#define MSG_HEATING_COMPLETE "Lammitys valmis."
|
|
#define MSG_BED_HEATING "Alusta lampiaa."
|
|
#define MSG_BED_DONE "Alusta valmis."
|
|
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
|
|
#define MSG_COUNT_X " Laskuri X: "
|
|
#define MSG_ERR_KILLED "Tulostin pysaytetty. kill():ia kutsuttu!"
|
|
#define MSG_ERR_STOPPED "Tulostin pysaytetty virheiden vuoksi. Korjaa virheet ja kayta M999 kaynnistaaksesi uudelleen. (Lampotila nollattiin. Aseta lampotila sen jalkeen kun jatkat.)"
|
|
#define MSG_RESEND "Uudelleenlahetys: "
|
|
#define MSG_UNKNOWN_COMMAND "Tuntematon komento: \""
|
|
#define MSG_ACTIVE_EXTRUDER "Aktiivinen suutin: "
|
|
#define MSG_INVALID_EXTRUDER "Virheellinen suutin"
|
|
#define MSG_X_MIN "x_min: "
|
|
#define MSG_X_MAX "x_max: "
|
|
#define MSG_Y_MIN "y_min: "
|
|
#define MSG_Y_MAX "y_max: "
|
|
#define MSG_Z_MIN "z_min: "
|
|
#define MSG_Z_MAX "z_max: "
|
|
#define MSG_M119_REPORT "Rajakytkimien tilaraportti"
|
|
#define MSG_ENDSTOP_HIT "AKTIIVISENA"
|
|
#define MSG_ENDSTOP_OPEN "avoinna"
|
|
#define MSG_HOTEND_OFFSET "Hotend offsets:"
|
|
|
|
#define MSG_SD_CANT_OPEN_SUBDIR "Alihakemistoa ei voitu avata"
|
|
#define MSG_SD_INIT_FAIL "SD alustus epaonnistui"
|
|
#define MSG_SD_VOL_INIT_FAIL "volume.init epaonnistui"
|
|
#define MSG_SD_OPENROOT_FAIL "openRoot epaonnistui"
|
|
#define MSG_SD_CARD_OK "SD kortti ok"
|
|
#define MSG_SD_WORKDIR_FAIL "workDir open epaonnistui"
|
|
#define MSG_SD_OPEN_FILE_FAIL "avaus epaonnistui, Tiedosto: "
|
|
#define MSG_SD_FILE_OPENED "Tiedosto avattu: "
|
|
#define MSG_SD_SIZE " Koko: "
|
|
#define MSG_SD_FILE_SELECTED "Tiedosto valittu"
|
|
#define MSG_SD_WRITE_TO_FILE "Kirjoitetaan tiedostoon: "
|
|
#define MSG_SD_PRINTING_BYTE "SD tulostus byte "
|
|
#define MSG_SD_NOT_PRINTING "Ei SD tulostus"
|
|
#define MSG_SD_ERR_WRITE_TO_FILE "virhe kirjoitettaessa tiedostoon"
|
|
#define MSG_SD_CANT_ENTER_SUBDIR "Alihakemistoon ei voitu siirtya: "
|
|
|
|
#define MSG_STEPPER_TOO_HIGH "Askellustaajuus liian suuri: "
|
|
#define MSG_ENDSTOPS_HIT "paatyrajat aktivoitu: "
|
|
#define MSG_ERR_COLD_EXTRUDE_STOP " kylmana pursotus estetty"
|
|
#define MSG_ERR_LONG_EXTRUDE_STOP " liian pitka pursotus estetty"
|
|
#define MSG_BABYSTEPPING_X "Babystepping X"
|
|
#define MSG_BABYSTEPPING_Y "Babystepping Y"
|
|
#define MSG_BABYSTEPPING_Z "Babystepping Z"
|
|
#define MSG_ENDSTOP_ABORT "Endstop abort"
|
|
#define MSG_CONTRAST "Kontrasti"
|
|
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Virhe valikon rakenteessa"
|
|
|
|
#endif
|
|
|
|
#if LANGUAGE_CHOICE == 10
|
|
|
|
// LCD Menu Messages
|
|
// Please note these are limited to 17 characters!
|
|
|
|
#define WELCOME_MSG MACHINE_NAME " parada."
|
|
#define MSG_SD_INSERTED "Tarcheta colocada"
|
|
#define MSG_SD_REMOVED "Tarcheta retirada"
|
|
#define MSG_MAIN "Menu prencipal"
|
|
#define MSG_AUTOSTART " Autostart"
|
|
#define MSG_DISABLE_STEPPERS "Amortar motors"
|
|
#define MSG_AUTO_HOME "Levar a l'orichen"
|
|
#define MSG_SET_ORIGIN "Establir zero"
|
|
#define MSG_PREHEAT_PLA "Precalentar PLA"
|
|
#define MSG_PREHEAT_PLA0 "Precalentar PLA0"
|
|
#define MSG_PREHEAT_PLA1 "Precalentar PLA1"
|
|
#define MSG_PREHEAT_PLA2 "Precalentar PLA2"
|
|
#define MSG_PREHEAT_PLA012 "Precalentar PLA a"
|
|
#define MSG_PREHEAT_PLA_BEDONLY "Prec. PLA Base"
|
|
#define MSG_PREHEAT_PLA_SETTINGS "Achustar tem. PLA"
|
|
#define MSG_PREHEAT_ABS "Precalentar ABS"
|
|
#define MSG_PREHEAT_ABS0 "Precalentar ABS0"
|
|
#define MSG_PREHEAT_ABS1 "Precalentar ABS1"
|
|
#define MSG_PREHEAT_ABS2 "Precalentar ABS2"
|
|
#define MSG_PREHEAT_ABS012 "Precalentar ABS a"
|
|
#define MSG_PREHEAT_ABS_BEDONLY "Prec. ABS Base"
|
|
#define MSG_PREHEAT_ABS_SETTINGS "Achustar tem. ABS"
|
|
#define MSG_COOLDOWN "Enfriar"
|
|
#define MSG_SWITCH_PS_ON "Enchegar Fuent"
|
|
#define MSG_SWITCH_PS_OFF "Desenchegar Fuent"
|
|
#define MSG_EXTRUDE "Extruir"
|
|
#define MSG_RETRACT "Retraer"
|
|
#define MSG_MOVE_AXIS "Mover Eixes"
|
|
#define MSG_MOVE_X "Move X"
|
|
#define MSG_MOVE_Y "Move Y"
|
|
#define MSG_MOVE_Z "Move Z"
|
|
#define MSG_MOVE_E "Extruder"
|
|
#define MSG_MOVE_E1 "Extruder2"
|
|
#define MSG_MOVE_E2 "Extruder3"
|
|
#define MSG_MOVE_01MM "Move 0.1mm"
|
|
#define MSG_MOVE_1MM "Move 1mm"
|
|
#define MSG_MOVE_10MM "Move 10mm"
|
|
#define MSG_SPEED "Velocidat"
|
|
#define MSG_NOZZLE "Nozzle"
|
|
#define MSG_NOZZLE1 "Nozzle2"
|
|
#define MSG_NOZZLE2 "Nozzle3"
|
|
#define MSG_BED "Base"
|
|
#define MSG_FAN_SPEED "Ixoriador"
|
|
#define MSG_FLOW "Fluxo"
|
|
#define MSG_FLOW0 "Fluxo 0"
|
|
#define MSG_FLOW1 "Fluxo 1"
|
|
#define MSG_FLOW2 "Fluxo 2"
|
|
#define MSG_CONTROL "Control"
|
|
#define MSG_MIN "\002 Min"
|
|
#define MSG_MAX "\002 Max"
|
|
#define MSG_FACTOR "\002 Fact"
|
|
#define MSG_AUTOTEMP "Autotemp"
|
|
#define MSG_ON "On"
|
|
#define MSG_OFF "Off"
|
|
#define MSG_PID_P "PID-P"
|
|
#define MSG_PID_I "PID-I"
|
|
#define MSG_PID_D "PID-D"
|
|
#define MSG_PID_C "PID-C"
|
|
#define MSG_ACC "Acel"
|
|
#define MSG_VXY_JERK "Vxy-jerk"
|
|
#define MSG_VZ_JERK "Vz-jerk"
|
|
#define MSG_VE_JERK "Ves-jerk"
|
|
#define MSG_VMAX "Vmax"
|
|
#define MSG_X "x"
|
|
#define MSG_Y "y"
|
|
#define MSG_Z "z"
|
|
#define MSG_E "y"
|
|
#define MSG_VMIN "Vmin"
|
|
#define MSG_VTRAV_MIN "VTrav min"
|
|
#define MSG_AMAX "Amax"
|
|
#define MSG_A_RETRACT "A-retrac."
|
|
#define MSG_XSTEPS "X trangos/mm"
|
|
#define MSG_YSTEPS "Y trangos/mm"
|
|
#define MSG_ZSTEPS "Z trangos/mm"
|
|
#define MSG_ESTEPS "E trangos/mm"
|
|
#define MSG_RECTRACT "Retraer"
|
|
#define MSG_TEMPERATURE "Temperatura"
|
|
#define MSG_MOTION "Movimiento"
|
|
#define MSG_STORE_EPROM "Alzar Memoria"
|
|
#define MSG_LOAD_EPROM "Cargar Memoria"
|
|
#define MSG_RESTORE_FAILSAFE "Rest. d'emerchen."
|
|
#define MSG_REFRESH "Tornar a cargar"
|
|
#define MSG_WATCH "Monitorizar"
|
|
#define MSG_PREPARE "Preparar"
|
|
#define MSG_TUNE "Achustar"
|
|
#define MSG_PAUSE_PRINT "Pausar impresion"
|
|
#define MSG_RESUME_PRINT "Contin. impresion"
|
|
#define MSG_STOP_PRINT "Detener Impresion"
|
|
#define MSG_CARD_MENU "Menu de SD"
|
|
#define MSG_NO_CARD "No i hai tarcheta"
|
|
#define MSG_DWELL "Reposo..."
|
|
#define MSG_USERWAIT "Asperan. ordines"
|
|
#define MSG_RESUMING "Contin. impresion"
|
|
#define MSG_NO_MOVE "Sin movimiento"
|
|
#define MSG_KILLED "ATURADA D'EMERCH."
|
|
#define MSG_STOPPED "ATURADA."
|
|
#define MSG_CONTROL_RETRACT "Retraer mm"
|
|
#define MSG_CONTROL_RETRACT_SWAP "Swap Retraer mm"
|
|
#define MSG_CONTROL_RETRACTF "Retraer F"
|
|
#define MSG_CONTROL_RETRACT_ZLIFT "Devantar mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVER "DesRet +mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Swap DesRet +mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVERF "DesRet F"
|
|
#define MSG_AUTORETRACT "AutoRetr."
|
|
#define MSG_FILAMENTCHANGE "Cambear"
|
|
#define MSG_INIT_SDCARD "Encetan. tarcheta"
|
|
#define MSG_CNG_SDCARD "Cambiar tarcheta"
|
|
#define MSG_RECTRACT_WIDE "Retraer"
|
|
#define MSG_TEMPERATURE_WIDE "Temperatura"
|
|
#define MSG_TEMPERATURE_RTN "Temperatura"
|
|
#define MSG_MAIN_WIDE "Menu Prencipal"
|
|
#define MSG_MOTION_WIDE "Movimiento"
|
|
#define MSG_PREPARE_ALT "Preparar"
|
|
#define MSG_CONTROL_ARROW "Control"
|
|
#define MSG_RETRACT_ARROW "Retraer"
|
|
#define MSG_STEPPER_RELEASED "Desacoplada."
|
|
#define MSG_ZPROBE_OUT "Z probe out. bed"
|
|
#define MSG_POSITION_UNKNOWN "Home X/Y before Z"
|
|
#define MSG_ZPROBE_ZOFFSET "Z Offset"
|
|
#define MSG_BABYSTEP_X "Babystep X"
|
|
#define MSG_BABYSTEP_Y "Babystep Y"
|
|
#define MSG_BABYSTEP_Z "Babystep Z"
|
|
#define MSG_ENDSTOP_ABORT "Endstop abort"
|
|
#define MSG_CONTRAST "Contrast"
|
|
|
|
// Serial Console Messages
|
|
|
|
#define MSG_Enqueing "En coda \""
|
|
#define MSG_POWERUP "PowerUp"
|
|
#define MSG_EXTERNAL_RESET " Reset Externo"
|
|
#define MSG_BROWNOUT_RESET " Reset por Voltaje Incorrecto"
|
|
#define MSG_WATCHDOG_RESET " Reset por Bloqueo"
|
|
#define MSG_SOFTWARE_RESET " Reset por Software"
|
|
#define MSG_AUTHOR " | Autor: "
|
|
#define MSG_CONFIGURATION_VER " Zaguer esvielle: "
|
|
#define MSG_FREE_MEMORY " Memoria libre: "
|
|
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
|
|
#define MSG_OK "ok"
|
|
#define MSG_FILE_SAVED "Guardau."
|
|
#define MSG_ERR_LINE_NO "O Numero de Linea no ye igual a l'Ultimo Numero de Linea+1, Ultima Linea:"
|
|
#define MSG_ERR_CHECKSUM_MISMATCH "o checksum no coincide, Ultima Linea:"
|
|
#define MSG_ERR_NO_CHECKSUM "No se podió trobar o Checksum con o numero de linea, Ultima Linea:"
|
|
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No se trobo o Numero de Linea con o Checksum, Ultima Linea:"
|
|
#define MSG_FILE_PRINTED "Impresion rematada"
|
|
#define MSG_BEGIN_FILE_LIST "Prencipio d'a lista de fichero"
|
|
#define MSG_END_FILE_LIST "Fin d'a lista de fichero"
|
|
#define MSG_M104_INVALID_EXTRUDER "M104 Extrusor Invalido "
|
|
#define MSG_M105_INVALID_EXTRUDER "M105 Extrusor Invalido "
|
|
#define MSG_M200_INVALID_EXTRUDER "M200 Extrusor Invalido "
|
|
#define MSG_M218_INVALID_EXTRUDER "M218 Extrusor Invalido "
|
|
#define MSG_M221_INVALID_EXTRUDER "M221 Extrusor Invalido "
|
|
#define MSG_ERR_NO_THERMISTORS "No i hai termistores - no temp"
|
|
#define MSG_M109_INVALID_EXTRUDER "M109 Extrusor Invalido "
|
|
#define MSG_HEATING "Calentando..."
|
|
#define MSG_HEATING_COMPLETE "Calentamiento Feito."
|
|
#define MSG_BED_HEATING "Calentando la base."
|
|
#define MSG_BED_DONE "Base Calient."
|
|
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
|
|
#define MSG_COUNT_X " Cuenta X:"
|
|
#define MSG_ERR_KILLED "Impresora Aturada con kill()!!"
|
|
#define MSG_ERR_STOPPED "Impresora aturada por errors. Apanye a error y use M999 Ta reiniciar!. (a temperatura se reestablece. Ajustela antes de continar)"
|
|
#define MSG_RESEND "Reninviar:"
|
|
#define MSG_UNKNOWN_COMMAND "Comando Desconoixiu:\""
|
|
#define MSG_ACTIVE_EXTRUDER "Extrusor Activo: "
|
|
#define MSG_INVALID_EXTRUDER "Extrusor Invalido"
|
|
#define MSG_X_MIN "x_min: "
|
|
#define MSG_X_MAX "x_max: "
|
|
#define MSG_Y_MIN "y_min: "
|
|
#define MSG_Y_MAX "y_max: "
|
|
#define MSG_Z_MIN "z_min: "
|
|
#define MSG_Z_MAX "z_max: "
|
|
#define MSG_M119_REPORT "Comprobando fins de corrida."
|
|
#define MSG_ENDSTOP_HIT "PULSAU"
|
|
#define MSG_ENDSTOP_OPEN "ubierto"
|
|
#define MSG_HOTEND_OFFSET "Hotend offsets:"
|
|
#define MSG_SD_CANT_OPEN_SUBDIR "No se podió ubrir a subcarpeta."
|
|
#define MSG_SD_INIT_FAIL "Fallo en encetar a SD"
|
|
#define MSG_SD_VOL_INIT_FAIL "Fallo en amontar o volumen"
|
|
#define MSG_SD_OPENROOT_FAIL "Fallo en ubrir a carpeta raiz"
|
|
#define MSG_SD_CARD_OK "Tarcheta SD OK"
|
|
#define MSG_SD_WORKDIR_FAIL "Fallo en ubrir a carpeta de treballo"
|
|
#define MSG_SD_OPEN_FILE_FAIL "Error en ubrir, Fichero: "
|
|
#define MSG_SD_FILE_OPENED "Fichero ubierto:"
|
|
#define MSG_SD_SIZE " Grandaria:"
|
|
#define MSG_SD_FILE_SELECTED "Fichero Seleccionau"
|
|
#define MSG_SD_WRITE_TO_FILE "Escribindo en o fichero: "
|
|
#define MSG_SD_PRINTING_BYTE "SD imprentando o byte "
|
|
#define MSG_SD_NOT_PRINTING "No se ye imprentando con SD"
|
|
#define MSG_SD_ERR_WRITE_TO_FILE "Error en escribir en o fichero"
|
|
#define MSG_SD_CANT_ENTER_SUBDIR "No se puede ubrir a carpeta:"
|
|
|
|
#define MSG_STEPPER_TOO_HIGH "Steprate masiau alto : "
|
|
#define MSG_ENDSTOPS_HIT "S'ha tocau a fin de carril: "
|
|
#define MSG_ERR_COLD_EXTRUDE_STOP " extrusion fria privada"
|
|
#define MSG_ERR_LONG_EXTRUDE_STOP " extrusion masiau larga privada"
|
|
#define MSG_BABYSTEPPING_X "Babystepping X"
|
|
#define MSG_BABYSTEPPING_Y "Babystepping Y"
|
|
#define MSG_BABYSTEPPING_Z "Babystepping Z"
|
|
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
|
|
|
|
#endif
|
|
|
|
#if LANGUAGE_CHOICE == 11 //Dutch
|
|
|
|
// LCD Menu Messages
|
|
// Please note these are limited to 17 characters!
|
|
|
|
#define WELCOME_MSG MACHINE_NAME " gereed."
|
|
#define MSG_SD_INSERTED "Kaart ingestoken"
|
|
#define MSG_SD_REMOVED "Kaart verwijderd"
|
|
#define MSG_MAIN "Main"
|
|
#define MSG_AUTOSTART "Autostart"
|
|
#define MSG_DISABLE_STEPPERS "Motoren uit"
|
|
#define MSG_AUTO_HOME "Auto home"
|
|
#define MSG_SET_ORIGIN "Nulpunt instellen"
|
|
#define MSG_PREHEAT_PLA "PLA voorverwarmen"
|
|
#define MSG_PREHEAT_PLA0 "PLA voorverw. 0"
|
|
#define MSG_PREHEAT_PLA1 "PLA voorverw. 1"
|
|
#define MSG_PREHEAT_PLA2 "PLA voorverw. 2"
|
|
#define MSG_PREHEAT_PLA012 "PLA voorverw. aan"
|
|
#define MSG_PREHEAT_PLA_BEDONLY "PLA voorverw. Bed"
|
|
#define MSG_PREHEAT_PLA_SETTINGS "PLA verw. conf"
|
|
#define MSG_PREHEAT_ABS "ABS voorverwarmen"
|
|
#define MSG_PREHEAT_ABS0 "ABS voorverw. 0"
|
|
#define MSG_PREHEAT_ABS1 "ABS voorverw. 1"
|
|
#define MSG_PREHEAT_ABS2 "ABS voorverw. 2"
|
|
#define MSG_PREHEAT_ABS012 "ABS voorverw. aan"
|
|
#define MSG_PREHEAT_ABS_BEDONLY "ABS voorverw. Bed"
|
|
#define MSG_PREHEAT_ABS_SETTINGS "ABS verw. conf"
|
|
#define MSG_COOLDOWN "Afkoelen"
|
|
#define MSG_SWITCH_PS_ON "Stroom aan"
|
|
#define MSG_SWITCH_PS_OFF "Stroom uit"
|
|
#define MSG_EXTRUDE "Extrude"
|
|
#define MSG_RETRACT "Retract"
|
|
#define MSG_MOVE_AXIS "As verplaatsen"
|
|
#define MSG_MOVE_X "Verplaats X"
|
|
#define MSG_MOVE_Y "Verplaats Y"
|
|
#define MSG_MOVE_Z "Verplaats Z"
|
|
#define MSG_MOVE_E "Extruder"
|
|
#define MSG_MOVE_E1 "Extruder2"
|
|
#define MSG_MOVE_E2 "Extruder3"
|
|
#define MSG_MOVE_01MM "Verplaats 0.1mm"
|
|
#define MSG_MOVE_1MM "Verplaats 1mm"
|
|
#define MSG_MOVE_10MM "Verplaats 10mm"
|
|
#define MSG_SPEED "Snelheid"
|
|
#define MSG_NOZZLE "Nozzle"
|
|
#define MSG_NOZZLE1 "Nozzle2"
|
|
#define MSG_NOZZLE2 "Nozzle3"
|
|
#define MSG_BED "Bed"
|
|
#define MSG_FAN_SPEED "Fan snelheid"
|
|
#define MSG_FLOW "Flow"
|
|
#define MSG_FLOW0 "Flow 0"
|
|
#define MSG_FLOW1 "Flow 1"
|
|
#define MSG_FLOW2 "Flow 2"
|
|
#define MSG_CONTROL "Control"
|
|
#define MSG_MIN " \002 Min"
|
|
#define MSG_MAX " \002 Max"
|
|
#define MSG_FACTOR " \002 Fact"
|
|
#define MSG_AUTOTEMP "Autotemp"
|
|
#define MSG_ON "Aan "
|
|
#define MSG_OFF "Uit"
|
|
#define MSG_PID_P "PID-P"
|
|
#define MSG_PID_I "PID-I"
|
|
#define MSG_PID_D "PID-D"
|
|
#define MSG_PID_C "PID-C"
|
|
#define MSG_ACC "Versn"
|
|
#define MSG_VXY_JERK "Vxy-jerk"
|
|
#define MSG_VZ_JERK "Vz-jerk"
|
|
#define MSG_VE_JERK "Ve-jerk"
|
|
#define MSG_VMAX "Vmax "
|
|
#define MSG_X "x"
|
|
#define MSG_Y "y"
|
|
#define MSG_Z "z"
|
|
#define MSG_E "e"
|
|
#define MSG_VMIN "Vmin"
|
|
#define MSG_VTRAV_MIN "VTrav min"
|
|
#define MSG_AMAX "Amax "
|
|
#define MSG_A_RETRACT "A-retract"
|
|
#define MSG_XSTEPS "Xsteps/mm"
|
|
#define MSG_YSTEPS "Ysteps/mm"
|
|
#define MSG_ZSTEPS "Zsteps/mm"
|
|
#define MSG_ESTEPS "Esteps/mm"
|
|
#define MSG_RECTRACT "Terugtrekken"
|
|
#define MSG_TEMPERATURE "Temperatuur"
|
|
#define MSG_MOTION "Beweging"
|
|
#define MSG_CONTRAST "LCD contrast"
|
|
#define MSG_STORE_EPROM "Geheugen opslaan"
|
|
#define MSG_LOAD_EPROM "Geheugen laden"
|
|
#define MSG_RESTORE_FAILSAFE "Noodstop reset"
|
|
#define MSG_REFRESH "Ververs"
|
|
#define MSG_WATCH "Info scherm"
|
|
#define MSG_PREPARE "Voorbereiden"
|
|
#define MSG_TUNE "Afstellen"
|
|
#define MSG_PAUSE_PRINT "Print pauzeren"
|
|
#define MSG_RESUME_PRINT "Print hervatten"
|
|
#define MSG_STOP_PRINT "Print stoppen"
|
|
#define MSG_CARD_MENU "Print van SD"
|
|
#define MSG_NO_CARD "Geen SD kaart"
|
|
#define MSG_DWELL "Slapen..."
|
|
#define MSG_USERWAIT "Wachten..."
|
|
#define MSG_RESUMING "Print hervatten"
|
|
#define MSG_NO_MOVE "Geen beweging."
|
|
#define MSG_KILLED "AFGEBROKEN. "
|
|
#define MSG_STOPPED "GESTOPT. "
|
|
#define MSG_CONTROL_RETRACT "Retract mm"
|
|
#define MSG_CONTROL_RETRACT_SWAP "Ruil Retract mm"
|
|
#define MSG_CONTROL_RETRACTF "Retract F"
|
|
#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Ruil UnRet +mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet F"
|
|
#define MSG_AUTORETRACT "AutoRetr."
|
|
#define MSG_FILAMENTCHANGE "Verv. Filament"
|
|
#define MSG_INIT_SDCARD "Init. SD kaart"
|
|
#define MSG_CNG_SDCARD "Verv. SD card"
|
|
#define MSG_ZPROBE_OUT "Z probe uit. bed"
|
|
#define MSG_POSITION_UNKNOWN "Home X/Y voor Z"
|
|
#define MSG_ZPROBE_ZOFFSET "Z Offset"
|
|
#define MSG_BABYSTEP_X "Babystap X"
|
|
#define MSG_BABYSTEP_Y "Babystap Y"
|
|
#define MSG_BABYSTEP_Z "Babystap Z"
|
|
#define MSG_ENDSTOP_ABORT "Endstop afbr."
|
|
|
|
// Serial Console Messages
|
|
|
|
#define MSG_Enqueing "enqueing \""
|
|
#define MSG_POWERUP "Opstarten"
|
|
#define MSG_EXTERNAL_RESET " Externe Reset"
|
|
#define MSG_BROWNOUT_RESET " Lage voedingsspanning Reset"
|
|
#define MSG_WATCHDOG_RESET " Watchdog Reset"
|
|
#define MSG_SOFTWARE_RESET " Software Reset"
|
|
#define MSG_AUTHOR " | Auteur: "
|
|
#define MSG_CONFIGURATION_VER " Laatst bijgewerkt: "
|
|
#define MSG_FREE_MEMORY " Vrij Geheugen: "
|
|
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
|
|
#define MSG_OK "ok"
|
|
#define MSG_FILE_SAVED "Bestand opslaan voltooid."
|
|
#define MSG_ERR_LINE_NO "Regelnummer is niet het laatste regelnummer+1, Laatste regel: "
|
|
#define MSG_ERR_CHECKSUM_MISMATCH "Checksum fout, Laatste regel: "
|
|
#define MSG_ERR_NO_CHECKSUM "Regel zonder checksum, Laatste regel: "
|
|
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Geen regelnummer met checksum, Laatste regel: "
|
|
#define MSG_FILE_PRINTED "Bestand afdrukken klaar"
|
|
#define MSG_BEGIN_FILE_LIST "Begin bestandslijst"
|
|
#define MSG_END_FILE_LIST "Einde bestandslijst"
|
|
#define MSG_M104_INVALID_EXTRUDER "M104 Ongeldige extruder "
|
|
#define MSG_M105_INVALID_EXTRUDER "M105 Ongeldige extruder "
|
|
#define MSG_M200_INVALID_EXTRUDER "M200 Ongeldige extruder "
|
|
#define MSG_M218_INVALID_EXTRUDER "M218 Ongeldige extruder "
|
|
#define MSG_M221_INVALID_EXTRUDER "M221 Ongeldige extruder "
|
|
#define MSG_ERR_NO_THERMISTORS "Geen thermistors - geen temperatuur"
|
|
#define MSG_M109_INVALID_EXTRUDER "M109 Ongeldige extruder "
|
|
#define MSG_HEATING "Opwarmen..."
|
|
#define MSG_HEATING_COMPLETE "Opwarmen klaar."
|
|
#define MSG_BED_HEATING "Bed opwarmen."
|
|
#define MSG_BED_DONE "Bed klaar."
|
|
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup voor gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
|
|
#define MSG_COUNT_X " Aantal X: "
|
|
#define MSG_ERR_KILLED "Printer stopgezet. kill() aangeroepen!"
|
|
#define MSG_ERR_STOPPED "Printer gestopt vanwege fouten. Los de fout op en gebruik M999 om opnieuw te starten. (Temperatuur is gereset, stel deze opnieuw in na herstart)"
|
|
#define MSG_RESEND "Opnieuw sturen: "
|
|
#define MSG_UNKNOWN_COMMAND "Onbekend commando: \""
|
|
#define MSG_ACTIVE_EXTRUDER "Actieve Extruder: "
|
|
#define MSG_INVALID_EXTRUDER "Ongeldige extruder"
|
|
#define MSG_X_MIN "x_min: "
|
|
#define MSG_X_MAX "x_max: "
|
|
#define MSG_Y_MIN "y_min: "
|
|
#define MSG_Y_MAX "y_max: "
|
|
#define MSG_Z_MIN "z_min: "
|
|
#define MSG_Z_MAX "z_max: "
|
|
#define MSG_M119_REPORT "Eindstop statusrapportage:"
|
|
#define MSG_ENDSTOP_HIT "GERAAKT"
|
|
#define MSG_ENDSTOP_OPEN "open"
|
|
#define MSG_HOTEND_OFFSET "Hotend afwijking:"
|
|
|
|
#define MSG_SD_CANT_OPEN_SUBDIR "Kan subdirectory niet openen"
|
|
#define MSG_SD_INIT_FAIL "SD initialiseren mislukt"
|
|
#define MSG_SD_VOL_INIT_FAIL "volume.init mislukt"
|
|
#define MSG_SD_OPENROOT_FAIL "openRoot mislukt"
|
|
#define MSG_SD_CARD_OK "SD kaart ok"
|
|
#define MSG_SD_WORKDIR_FAIL "workDir openen mislukt"
|
|
#define MSG_SD_OPEN_FILE_FAIL "Openen mislukt, bestand: "
|
|
#define MSG_SD_FILE_OPENED "Bestand geopend: "
|
|
#define MSG_SD_SIZE " Grootte: "
|
|
#define MSG_SD_FILE_SELECTED "Bestanden geselecteerd:"
|
|
#define MSG_SD_WRITE_TO_FILE "Schrijven naar bestand: "
|
|
#define MSG_SD_PRINTING_BYTE "SD printen byte: "
|
|
#define MSG_SD_NOT_PRINTING "Niet SD printen"
|
|
#define MSG_SD_ERR_WRITE_TO_FILE "Fout tijdens het schrijven naar bestand:"
|
|
#define MSG_SD_CANT_ENTER_SUBDIR "Kan subdirectory niet in: "
|
|
|
|
#define MSG_STEPPER_TOO_HIGH "stapsnelheid te hoog:"
|
|
#define MSG_ENDSTOPS_HIT "endstops geraakt: "
|
|
#define MSG_ERR_COLD_EXTRUDE_STOP " Koude extrusie voorkomen"
|
|
#define MSG_ERR_LONG_EXTRUDE_STOP " te lange extrusie voorkomen"
|
|
#define MSG_BABYSTEPPING_X "Babystepping X"
|
|
#define MSG_BABYSTEPPING_Y "Babystepping Y"
|
|
#define MSG_BABYSTEPPING_Z "Babystepping Z"
|
|
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Fout in menustructuur"
|
|
|
|
#endif
|
|
|
|
|
|
#if LANGUAGE_CHOICE == 12
|
|
|
|
// LCD Menu Messages
|
|
|
|
// Please note these are limited to 17 characters!
|
|
|
|
#define WELCOME_MSG MACHINE_NAME " preparada."
|
|
#define MSG_SD_INSERTED "SD detectada."
|
|
#define MSG_SD_REMOVED "SD expulsada."
|
|
#define MSG_MAIN "Menu principal"
|
|
#define MSG_AUTOSTART "Inici automatic"
|
|
#define MSG_DISABLE_STEPPERS "Apagar motors"
|
|
#define MSG_AUTO_HOME "Home global"
|
|
#define MSG_SET_ORIGIN "Establir origen"
|
|
#define MSG_PREHEAT_PLA "Preescalfar PLA"
|
|
#define MSG_PREHEAT_PLA0 "Preescalfar PLA 1"
|
|
#define MSG_PREHEAT_PLA1 "Preescalfar PLA 2"
|
|
#define MSG_PREHEAT_PLA2 "Preescalfar PLA 3"
|
|
#define MSG_PREHEAT_PLA012 "Preesc. tot PLA"
|
|
#define MSG_PREHEAT_PLA_BEDONLY "Preesc. llit PLA"
|
|
#define MSG_PREHEAT_PLA_SETTINGS "Configuració PLA"
|
|
#define MSG_PREHEAT_ABS "Preescalfar ABS"
|
|
#define MSG_PREHEAT_ABS0 "Preescalfar ABS 1"
|
|
#define MSG_PREHEAT_ABS1 "Preescalfar ABS 2"
|
|
#define MSG_PREHEAT_ABS2 "Preescalfar ABS 3"
|
|
#define MSG_PREHEAT_ABS012 "Preesc. tot ABS"
|
|
#define MSG_PREHEAT_ABS_BEDONLY "Preesc. llit ABS"
|
|
#define MSG_PREHEAT_ABS_SETTINGS "Configuració ABS"
|
|
#define MSG_COOLDOWN "Refredar"
|
|
#define MSG_SWITCH_PS_ON "Switch power on"
|
|
#define MSG_SWITCH_PS_OFF "Switch power off"
|
|
#define MSG_EXTRUDE "Extruir"
|
|
#define MSG_RETRACT "Refredar"
|
|
#define MSG_MOVE_AXIS "Moure eixos"
|
|
#define MSG_MOVE_X "Moure X"
|
|
#define MSG_MOVE_Y "Moure Y"
|
|
#define MSG_MOVE_Z "Moure Z"
|
|
#define MSG_MOVE_E "Extrusor"
|
|
#define MSG_MOVE_E1 "Extruder2"
|
|
#define MSG_MOVE_E2 "Extruder3"
|
|
#define MSG_MOVE_01MM "Moure 0.1mm"
|
|
#define MSG_MOVE_1MM "Moure 1mm"
|
|
#define MSG_MOVE_10MM "Moure 10mm"
|
|
#define MSG_SPEED "Velocitat"
|
|
#define MSG_NOZZLE "Nozzle"
|
|
#define MSG_NOZZLE1 "Nozzle2"
|
|
#define MSG_NOZZLE2 "Nozzle3"
|
|
#define MSG_BED "Llit"
|
|
#define MSG_FAN_SPEED "Vel. Ventilador"
|
|
#define MSG_FLOW "Fluxe"
|
|
#define MSG_FLOW0 "Fluxe 0"
|
|
#define MSG_FLOW1 "Fluxe 1"
|
|
#define MSG_FLOW2 "Fluxe 2"
|
|
#define MSG_CONTROL "Control"
|
|
#define MSG_MIN " \002 Min"
|
|
#define MSG_MAX " \002 Max"
|
|
#define MSG_FACTOR " \002 Fact"
|
|
#define MSG_AUTOTEMP "Autotemp"
|
|
#define MSG_ON "On "
|
|
#define MSG_OFF "Off"
|
|
#define MSG_PID_P "PID-P"
|
|
#define MSG_PID_I "PID-I"
|
|
#define MSG_PID_D "PID-D"
|
|
#define MSG_PID_C "PID-C"
|
|
#define MSG_ACC "Accel"
|
|
#define MSG_VXY_JERK "Vxy-jerk"
|
|
#define MSG_VZ_JERK "Vz-jerk"
|
|
#define MSG_VE_JERK "Ve-jerk"
|
|
#define MSG_VMAX "Vmax "
|
|
#define MSG_X "x"
|
|
#define MSG_Y "y"
|
|
#define MSG_Z "z"
|
|
#define MSG_E "e"
|
|
#define MSG_VMIN "Vmin"
|
|
#define MSG_VTRAV_MIN "VTrav min"
|
|
#define MSG_AMAX "Amax "
|
|
#define MSG_A_RETRACT "A-retract"
|
|
#define MSG_XSTEPS "Xpassos/mm"
|
|
#define MSG_YSTEPS "Ypassos/mm"
|
|
#define MSG_ZSTEPS "Zpassos/mm"
|
|
#define MSG_ESTEPS "Epassos/mm"
|
|
#define MSG_RECTRACT "Retreure"
|
|
#define MSG_TEMPERATURE "Temperatura"
|
|
#define MSG_MOTION "Moviment"
|
|
#define MSG_CONTRAST "Contrast de LCD"
|
|
#define MSG_STORE_EPROM "Desar a memoria"
|
|
#define MSG_LOAD_EPROM "Carregar de mem."
|
|
#define MSG_RESTORE_FAILSAFE "Rest. emergencia"
|
|
#define MSG_REFRESH "Refrescar"
|
|
#define MSG_WATCH "Pantalla Info."
|
|
#define MSG_PREPARE "Preparar"
|
|
#define MSG_TUNE "Calibrar"
|
|
#define MSG_PAUSE_PRINT "Pausa imp."
|
|
#define MSG_RESUME_PRINT "Reprendre imp."
|
|
#define MSG_STOP_PRINT "Parar inp."
|
|
#define MSG_CARD_MENU "Imprimir de SD"
|
|
#define MSG_NO_CARD "-Sense targeta SD"
|
|
#define MSG_DWELL "Repos..."
|
|
#define MSG_USERWAIT "Esperant usuari.."
|
|
#define MSG_RESUMING "Reprenent imp."
|
|
#define MSG_NO_MOVE "Sense moviment."
|
|
#define MSG_KILLED "PARADA DE EMERG. "
|
|
#define MSG_STOPPED "ATURAT. "
|
|
#define MSG_CONTROL_RETRACT "Retreure mm"
|
|
#define MSG_CONTROL_RETRACT_SWAP "Swap Retreure mm"
|
|
#define MSG_CONTROL_RETRACTF "Retreure F"
|
|
#define MSG_CONTROL_RETRACT_ZLIFT "Aixecar mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVER "DesRet +mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Swap DesRet +mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVERF "DesRet F"
|
|
#define MSG_AUTORETRACT "AutoRetr."
|
|
#define MSG_FILAMENTCHANGE "Canviar filament"
|
|
#define MSG_INIT_SDCARD "Iniciant SD"
|
|
#define MSG_CNG_SDCARD "Canviar SD"
|
|
#define MSG_ZPROBE_OUT "Z probe out. bed"
|
|
#define MSG_POSITION_UNKNOWN "Home X/Y abans Z"
|
|
#define MSG_ZPROBE_ZOFFSET "Z Offset"
|
|
#define MSG_BABYSTEP_X "Babystep X"
|
|
#define MSG_BABYSTEP_Y "Babystep Y"
|
|
#define MSG_BABYSTEP_Z "Babystep Z"
|
|
#define MSG_ENDSTOP_ABORT "Endstop abort"
|
|
|
|
// Serial Console Messages
|
|
|
|
#define MSG_Enqueing "en cua \""
|
|
#define MSG_POWERUP "PowerUp"
|
|
#define MSG_EXTERNAL_RESET " Reset Extern"
|
|
#define MSG_BROWNOUT_RESET " Reset per Voltatge Incorrecte"
|
|
#define MSG_WATCHDOG_RESET " Reset per Bloqueix"
|
|
#define MSG_SOFTWARE_RESET " Reset per Software"
|
|
#define MSG_AUTHOR " | Author: "
|
|
#define MSG_CONFIGURATION_VER "Ultima actualitzacio: "
|
|
#define MSG_FREE_MEMORY " Memoria lliure: "
|
|
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
|
|
#define MSG_OK "ok"
|
|
#define MSG_FILE_SAVED "Fitxer desat."
|
|
#define MSG_ERR_LINE_NO "El Numero de la Linia no es igual al Ultimo Numero de Linia+1, Ultima Linia:"
|
|
#define MSG_ERR_CHECKSUM_MISMATCH "el checksum no coincideix, Ultima Linia:"
|
|
#define MSG_ERR_NO_CHECKSUM "No s'ha trobat el Checksum amb el numero de linea, Ultima Linea:"
|
|
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No s'ha trobat Numero de Linea amb el Checksum, Ultima Linea:"
|
|
#define MSG_FILE_PRINTED "Impresio acabada"
|
|
#define MSG_BEGIN_FILE_LIST "Inici de la llista d'arxius"
|
|
#define MSG_END_FILE_LIST "Fi de la llista d'arxius"
|
|
#define MSG_M104_INVALID_EXTRUDER "M104 Extrusor Invalid "
|
|
#define MSG_M105_INVALID_EXTRUDER "M105 Extrusor Invalid "
|
|
#define MSG_M200_INVALID_EXTRUDER "M200 Extrusor Invalid "
|
|
#define MSG_M218_INVALID_EXTRUDER "M218 Extrusor Invalid "
|
|
#define MSG_M221_INVALID_EXTRUDER "M221 Extrusor Invalid "
|
|
#define MSG_ERR_NO_THERMISTORS "No hi ha termistors - sense temperatura"
|
|
#define MSG_M109_INVALID_EXTRUDER "M109 Extrusor Invalid "
|
|
#define MSG_HEATING "Escalfant..."
|
|
#define MSG_HEATING_COMPLETE "Escalfament acabat."
|
|
#define MSG_BED_HEATING "Escalfant llit."
|
|
#define MSG_BED_DONE "Llit Calent."
|
|
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
|
|
#define MSG_COUNT_X " Count X: "
|
|
#define MSG_ERR_KILLED "Impressora Parada per kill()!"
|
|
#define MSG_ERR_STOPPED "Impressora Parada per errors. Repara l'error i utilitza M999 per reiniciar!. (Hi ha un reset de temperatura, cal ajustarla abans de continuuar)"
|
|
#define MSG_RESEND "Reenviar: "
|
|
#define MSG_UNKNOWN_COMMAND "Comanda Desconeguda: \""
|
|
#define MSG_ACTIVE_EXTRUDER "Extrusor Actiu: "
|
|
#define MSG_INVALID_EXTRUDER "Extrusor Invalid"
|
|
#define MSG_X_MIN "x_min: "
|
|
#define MSG_X_MAX "x_max: "
|
|
#define MSG_Y_MIN "y_min: "
|
|
#define MSG_Y_MAX "y_max: "
|
|
#define MSG_Z_MIN "z_min: "
|
|
#define MSG_Z_MAX "z_max: "
|
|
#define MSG_M119_REPORT "Comprobant finals de carrera."
|
|
#define MSG_ENDSTOP_HIT "Activat"
|
|
#define MSG_ENDSTOP_OPEN "obert"
|
|
#define MSG_HOTEND_OFFSET "Hotend offsets:"
|
|
|
|
#define MSG_SD_CANT_OPEN_SUBDIR "No s'ha pogut obrir la carpeta"
|
|
#define MSG_SD_INIT_FAIL "Error al iniciar la SD"
|
|
#define MSG_SD_VOL_INIT_FAIL "Error al montar el volum"
|
|
#define MSG_SD_OPENROOT_FAIL "Error al obrir la carpeta arrel"
|
|
#define MSG_SD_CARD_OK "Targeta SD OK"
|
|
#define MSG_SD_WORKDIR_FAIL "Error al obrir la carpeta de treball"
|
|
#define MSG_SD_OPEN_FILE_FAIL "Error al obrir, Fitxer: "
|
|
#define MSG_SD_FILE_OPENED "Fitxer obert:"
|
|
#define MSG_SD_SIZE " Mida: "
|
|
#define MSG_SD_FILE_SELECTED "Fitxer Seleccionat"
|
|
#define MSG_SD_WRITE_TO_FILE "Desant al fitxer: "
|
|
#define MSG_SD_PRINTING_BYTE "SD imprimint el byte "
|
|
#define MSG_SD_NOT_PRINTING "No s'està imprimint amb SD"
|
|
#define MSG_SD_ERR_WRITE_TO_FILE "Error al esciure al fitxer"
|
|
#define MSG_SD_CANT_ENTER_SUBDIR "No es pot obrir la carpeta: "
|
|
|
|
#define MSG_STEPPER_TOO_HIGH "Steprate massa alt: "
|
|
#define MSG_ENDSTOPS_HIT "S'ha tocat el final de carrera: "
|
|
#define MSG_ERR_COLD_EXTRUDE_STOP " extrusio freda evitada"
|
|
#define MSG_ERR_LONG_EXTRUDE_STOP " extrusio massa llarga evitada"
|
|
#define MSG_BABYSTEPPING_X "Babystepping X"
|
|
#define MSG_BABYSTEPPING_Y "Babystepping Y"
|
|
#define MSG_BABYSTEPPING_Z "Babystepping Z"
|
|
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error a l'estructura dels menus"
|
|
|
|
#endif
|
|
|
|
//Basque-Euskera
|
|
#if LANGUAGE_CHOICE == 13
|
|
|
|
// LCD Menu Messages
|
|
// Please note these are limited to 17 characters!
|
|
|
|
#define WELCOME_MSG MACHINE_NAME " prest."
|
|
#define MSG_SD_INSERTED "Txartela sartuta"
|
|
#define MSG_SD_REMOVED "Txartela kenduta"
|
|
#define MSG_MAIN "Menu nagusia"
|
|
#define MSG_AUTOSTART "Auto hasiera"
|
|
#define MSG_DISABLE_STEPPERS "Itzali motoreak"
|
|
#define MSG_AUTO_HOME "Hasierara joan"
|
|
#define MSG_SET_ORIGIN "Hasiera ipini"
|
|
#define MSG_PREHEAT_PLA "Aurreberotu PLA"
|
|
#define MSG_PREHEAT_PLA0 "Aurreberotu PLA1"
|
|
#define MSG_PREHEAT_PLA1 "Aurreberotu PLA2"
|
|
#define MSG_PREHEAT_PLA2 "Aurreberotu PLA3"
|
|
#define MSG_PREHEAT_PLA012 "Berotu PLA Guztia"
|
|
#define MSG_PREHEAT_PLA_BEDONLY "Berotu PLA Ohea"
|
|
#define MSG_PREHEAT_PLA_SETTINGS "Berotu PLA Konfig"
|
|
#define MSG_PREHEAT_ABS "Aurreberotu ABS"
|
|
#define MSG_PREHEAT_ABS0 "Aurreberotu ABS 1"
|
|
#define MSG_PREHEAT_ABS1 "Aurreberotu ABS 2"
|
|
#define MSG_PREHEAT_ABS2 "Aurreberotu ABS 3"
|
|
#define MSG_PREHEAT_ABS012 "Berotu ABS Guztia"
|
|
#define MSG_PREHEAT_ABS_BEDONLY "Berotu ABS Ohea"
|
|
#define MSG_PREHEAT_ABS_SETTINGS "Berotu ABS Konfig"
|
|
#define MSG_COOLDOWN "Hoztu"
|
|
#define MSG_SWITCH_PS_ON "Energia piztu"
|
|
#define MSG_SWITCH_PS_OFF "Energia itzali"
|
|
#define MSG_EXTRUDE "Estruitu"
|
|
#define MSG_RETRACT "Atzera eragin"
|
|
#define MSG_MOVE_AXIS "Ardatzak mugitu"
|
|
#define MSG_MOVE_X "Mugitu X"
|
|
#define MSG_MOVE_Y "Mugitu Y"
|
|
#define MSG_MOVE_Z "Mugitu Z"
|
|
#define MSG_MOVE_E "Estrusorea"
|
|
#define MSG_MOVE_E1 "Estrusorea2"
|
|
#define MSG_MOVE_E2 "Estrusorea3"
|
|
#define MSG_MOVE_01MM "Mugitu 0.1mm"
|
|
#define MSG_MOVE_1MM "Mugitu 1mm"
|
|
#define MSG_MOVE_10MM "Mugitu 10mm"
|
|
#define MSG_SPEED "Abiadura"
|
|
#define MSG_NOZZLE "Pita"
|
|
#define MSG_NOZZLE1 "Pita2"
|
|
#define MSG_NOZZLE2 "Pita3"
|
|
#define MSG_BED "Ohea"
|
|
#define MSG_FAN_SPEED "Haizagailua"
|
|
#define MSG_FLOW "Fluxua"
|
|
#define MSG_FLOW0 "Fluxua 0"
|
|
#define MSG_FLOW1 "Fluxua 1"
|
|
#define MSG_FLOW2 "Fluxua 2"
|
|
#define MSG_CONTROL "Kontrola"
|
|
#define MSG_MIN " \002 Min"
|
|
#define MSG_MAX " \002 Max"
|
|
#define MSG_FACTOR " \002 Faktorea"
|
|
#define MSG_AUTOTEMP "Auto tenperatura"
|
|
#define MSG_ON "On "
|
|
#define MSG_OFF "Off"
|
|
#define MSG_PID_P "PID-P"
|
|
#define MSG_PID_I "PID-I"
|
|
#define MSG_PID_D "PID-D"
|
|
#define MSG_PID_C "PID-C"
|
|
#define MSG_ACC "Azelerazioa"
|
|
#define MSG_VXY_JERK "Vxy-astindua"
|
|
#define MSG_VZ_JERK "Vz-astindua"
|
|
#define MSG_VE_JERK "Ve-astindua"
|
|
#define MSG_VMAX "Vmax "
|
|
#define MSG_X "x"
|
|
#define MSG_Y "y"
|
|
#define MSG_Z "z"
|
|
#define MSG_E "e"
|
|
#define MSG_VMIN "Vmin"
|
|
#define MSG_VTRAV_MIN "VTrav min"
|
|
#define MSG_AMAX "Amax "
|
|
#define MSG_A_RETRACT "A-retrakt"
|
|
#define MSG_XSTEPS "X pausoak/mm"
|
|
#define MSG_YSTEPS "Y pausoak/mm"
|
|
#define MSG_ZSTEPS "Z pausoak/mm"
|
|
#define MSG_ESTEPS "E pausoak/mm"
|
|
#define MSG_RECTRACT "Atzera eragin"
|
|
#define MSG_TEMPERATURE "Tenperatura"
|
|
#define MSG_MOTION "Mugimendua"
|
|
#define MSG_CONTRAST "LCD kontrastea"
|
|
#define MSG_STORE_EPROM "Gorde memoria"
|
|
#define MSG_LOAD_EPROM "Kargatu memoria"
|
|
#define MSG_RESTORE_FAILSAFE "Larri. berriz."
|
|
#define MSG_REFRESH "Berriz kargatu"
|
|
#define MSG_WATCH "Pantaila info"
|
|
#define MSG_PREPARE "Prestatu"
|
|
#define MSG_TUNE "Doitu"
|
|
#define MSG_PAUSE_PRINT "Pausatu inprimak."
|
|
#define MSG_RESUME_PRINT "Jarraitu inprima."
|
|
#define MSG_STOP_PRINT "Gelditu inprima."
|
|
#define MSG_CARD_MENU "SD-tik inprimatu"
|
|
#define MSG_NO_CARD "Ez dago txartelik"
|
|
#define MSG_DWELL "Lo egin..."
|
|
#define MSG_USERWAIT "Aginduak zain..."
|
|
#define MSG_RESUMING "Jarraitzen inpri."
|
|
#define MSG_NO_MOVE "Mugimendu gabe"
|
|
#define MSG_KILLED "LARRIALDI GELDIA"
|
|
#define MSG_STOPPED "GELDITUTA. "
|
|
#define MSG_CONTROL_RETRACT "Atzera egin mm"
|
|
#define MSG_CONTROL_RETRACT_SWAP "Swap Atzera egin mm"
|
|
#define MSG_CONTROL_RETRACTF "Atzera egin V"
|
|
#define MSG_CONTROL_RETRACT_ZLIFT "Igo mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVER "Atzera egin +mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Swap Atzera egin +mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVERF "Atzera egin V"
|
|
#define MSG_AUTORETRACT "Atzera egin"
|
|
#define MSG_FILAMENTCHANGE "Aldatu filament."
|
|
#define MSG_INIT_SDCARD "Hasieratu txartela"
|
|
#define MSG_CNG_SDCARD "Aldatu txartela"
|
|
#define MSG_ZPROBE_OUT "Z ohe hasiera"
|
|
#define MSG_POSITION_UNKNOWN "Posizio ezezaguna"
|
|
#define MSG_ZPROBE_ZOFFSET "Z konpentsatu"
|
|
#define MSG_BABYSTEP_X "Babystep X"
|
|
#define MSG_BABYSTEP_Y "Babystep Y"
|
|
#define MSG_BABYSTEP_Z "Babystep Z"
|
|
#define MSG_ENDSTOP_ABORT "Endstop deuseztat"
|
|
|
|
// Serial Console Messages
|
|
|
|
#define MSG_Enqueing "Zerrendan \""
|
|
#define MSG_POWERUP "Pizketa"
|
|
#define MSG_EXTERNAL_RESET " Kanpoko Reset"
|
|
#define MSG_BROWNOUT_RESET " Tentsio Okerra Reset"
|
|
#define MSG_WATCHDOG_RESET " Reset Blokeoa"
|
|
#define MSG_SOFTWARE_RESET " Software Reset"
|
|
#define MSG_AUTHOR " | Egilea: "
|
|
#define MSG_CONFIGURATION_VER " Azken Aktualizazio: "
|
|
#define MSG_FREE_MEMORY " Aske Memoria: "
|
|
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
|
|
#define MSG_OK "ok"
|
|
#define MSG_FILE_SAVED "Gordetuta."
|
|
#define MSG_ERR_LINE_NO "Lerro zenbakia ez da azken zenbakia+1 berdina, Azken Lerroa: "
|
|
#define MSG_ERR_CHECKSUM_MISMATCH "checksum-ak ez du aldiberekotasuna, Azken Lerroa: "
|
|
#define MSG_ERR_NO_CHECKSUM "Ez da checksum-ik aurkitu lerro zenbakian, Azken Lerroa: "
|
|
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Ez da lerro zenbakia aurkitu checksum-arekin, Azken Lerroa: "
|
|
#define MSG_FILE_PRINTED "Inprimaketa bukatua"
|
|
#define MSG_BEGIN_FILE_LIST "Hasi artxibo zerrenda"
|
|
#define MSG_END_FILE_LIST "Amaitu artxibo zerrenda"
|
|
#define MSG_M104_INVALID_EXTRUDER "M104 Balio gabeko Estrusorea "
|
|
#define MSG_M105_INVALID_EXTRUDER "M105 Balio gabeko Estrusorea "
|
|
#define MSG_M200_INVALID_EXTRUDER "M200 Balio gabeko Estrusorea "
|
|
#define MSG_M218_INVALID_EXTRUDER "M218 Balio gabeko Estrusorea "
|
|
#define MSG_M221_INVALID_EXTRUDER "M221 Balio gabeko Estrusorea "
|
|
#define MSG_ERR_NO_THERMISTORS "Termistorerik ez dago - Tenperaturarik gabe"
|
|
#define MSG_M109_INVALID_EXTRUDER "M109 Balio gabeko Estrusorea "
|
|
#define MSG_HEATING "Berotzen..."
|
|
#define MSG_HEATING_COMPLETE "berotuta."
|
|
#define MSG_BED_HEATING "Ohea berotzen."
|
|
#define MSG_BED_DONE "Ohea berotuta."
|
|
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
|
|
#define MSG_COUNT_X " X Kontu: "
|
|
#define MSG_ERR_KILLED "Inprimagailua geldituta. kill() called!"
|
|
#define MSG_ERR_STOPPED "Akatsen eraginez inprimagailua geldituta. Errorea konpondu eta M999 erabili berrabiarazteko. (Tenperatura galdu egin da. Berriro ipini)"
|
|
#define MSG_RESEND "Bidali berriro: "
|
|
#define MSG_UNKNOWN_COMMAND "Agindu ezezaguna: \""
|
|
#define MSG_ACTIVE_EXTRUDER "Estrusore Aktiboa: "
|
|
#define MSG_INVALID_EXTRUDER "Balio gabeko Estrusorea"
|
|
#define MSG_X_MIN "x_min: "
|
|
#define MSG_X_MAX "x_max: "
|
|
#define MSG_Y_MIN "y_min: "
|
|
#define MSG_Y_MAX "y_max: "
|
|
#define MSG_Z_MIN "z_min: "
|
|
#define MSG_Z_MAX "z_max: "
|
|
#define MSG_M119_REPORT "Bide amaiera egiaztatzen"
|
|
#define MSG_ENDSTOP_HIT "Sakatuta"
|
|
#define MSG_ENDSTOP_OPEN "irekia"
|
|
#define MSG_HOTEND_OFFSET "Hotend offsets:"
|
|
|
|
#define MSG_SD_CANT_OPEN_SUBDIR "Azpidirektorio ezin da ireki"
|
|
#define MSG_SD_INIT_FAIL "Akatsa txartela hasterakoan"
|
|
#define MSG_SD_VOL_INIT_FAIL "Akatsa partizioa hasterakoan"
|
|
#define MSG_SD_OPENROOT_FAIL "Akatsa direktorio nagusian"
|
|
#define MSG_SD_CARD_OK "SD card ok"
|
|
#define MSG_SD_WORKDIR_FAIL "Akatsa lan direktorioan"
|
|
#define MSG_SD_OPEN_FILE_FAIL "Akatsa irekitzean, File: "
|
|
#define MSG_SD_FILE_OPENED "Artxiboa irekita: "
|
|
#define MSG_SD_SIZE " Tamaina: "
|
|
#define MSG_SD_FILE_SELECTED "Artxiboa aukeratuta"
|
|
#define MSG_SD_WRITE_TO_FILE "Artxiboa idazten: "
|
|
#define MSG_SD_PRINTING_BYTE "SD byte idazten "
|
|
#define MSG_SD_NOT_PRINTING "Ez dago SD-tik inprimatzen"
|
|
#define MSG_SD_ERR_WRITE_TO_FILE "Akatsak artxiboa idazten"
|
|
#define MSG_SD_CANT_ENTER_SUBDIR "Azpidirektorio ezin da ireki: "
|
|
|
|
#define MSG_STEPPER_TOO_HIGH "Motorra oso goi dago: "
|
|
#define MSG_ENDSTOPS_HIT "Bide amaiera ukitu da: "
|
|
#define MSG_ERR_COLD_EXTRUDE_STOP " estrusio hotza saihestua"
|
|
#define MSG_ERR_LONG_EXTRUDE_STOP " estrusio oso luzea saihestua"
|
|
#define MSG_BABYSTEPPING_X "Babystepping X"
|
|
#define MSG_BABYSTEPPING_Y "Babystepping Y"
|
|
#define MSG_BABYSTEPPING_Z "Babystepping Z"
|
|
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Akatsak menu-an"
|
|
|
|
#endif
|
|
|
|
#endif // ifndef LANGUAGE_H
|
|
|