Marlin 2.0 for Flying Bear 4S/5
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

245 lines
24 KiB

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Turkish
*
* LCD Menu Messages
* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
*
*/
#ifndef LANGUAGE_TR_H
#define LANGUAGE_TR_H
//#define SIMULATE_ROMFONT
#define DISPLAY_CHARSET_ISO10646_TR
#define WELCOME_MSG MACHINE_NAME " haz\xfdr." //hazır.
#define MSG_SD_INSERTED "SD Yerle\xfeti." //SD Yerleşti.
#define MSG_SD_REMOVED "SD \xc7\xfdkar\xfdld\xfd." //SD Çıkarıldı.
#define MSG_LCD_ENDSTOPS "Endstops" // Max length 8 characters //Endstops
#define MSG_MAIN "Ana" //Ana
#define MSG_AUTOSTART "Otoba\xfelat" //Otobaşlat
#define MSG_DISABLE_STEPPERS "Motorlar\xfd Durdur" //Motorları Durdur
#define MSG_AUTO_HOME "Eksenleri S\xfd\x66\xfdrla" //Eksenleri Sıfırla
#define MSG_AUTO_HOME_X "X S\xfd\x66\xfdrla" //X Sıfırla
#define MSG_AUTO_HOME_Y "Y S\xfd\x66\xfdrla" //Y Sıfırla
#define MSG_AUTO_HOME_Z "Z S\xfd\x66\xfdrla" //Z Sıfırla
#define MSG_LEVEL_BED_HOMING "XYZ S\xfd\x66\xfdrlan\xfdyor" //XYZ Sıfırlanıyor
#define MSG_LEVEL_BED_WAITING "Ba\xfelatmak i\xe7in t\xfdkla" //Başlatmak için tıkla
#define MSG_LEVEL_BED_NEXT_POINT "S\xfdradaki Nokta" //Sıradaki Nokta
#define MSG_LEVEL_BED_DONE "Seviyeleme Tamam!" //Seviyeleme Tamam!
#define MSG_LEVEL_BED_CANCEL "\xddptal" //İptal
#define MSG_SET_HOME_OFFSETS "Offset Ayarla" //Offset Ayarla
#define MSG_HOME_OFFSETS_APPLIED "Offset Tamam" //Offset Tamam
#define MSG_SET_ORIGIN "S\xfd\x66\xfdr Belirle" //Sıfır Belirle
#define MSG_PREHEAT_1 "\xd6n Is\xfdnma PLA" //Ön Isınma PLA
#define MSG_PREHEAT_1_N MSG_PREHEAT_1 " " //
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 " T\xfcm" // Tüm
#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 " Tabla" // Tabla
#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 " Ayar" // Ayar
#define MSG_PREHEAT_2 "\xd6n Is\xfdnma ABS" //Ön Isınma ABS
#define MSG_PREHEAT_2_N MSG_PREHEAT_2 " " //
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 " T\xfcm" // Tüm
#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 " Tabla" // Tabla
#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 " Ayar" // Ayar
#define MSG_COOLDOWN "So\xf0ut" //Soğut
#define MSG_SWITCH_PS_ON "G\xfcc\xfc A\xe7" //Gücü Aç
#define MSG_SWITCH_PS_OFF "G\xfcc\xfc Kapat" //Gücü Kapat
#define MSG_EXTRUDE "Extrude" //Extrude
#define MSG_RETRACT "Geri \xc7ek" //Geri Çek
#define MSG_MOVE_AXIS "Eksen Y\xf6net" //Eksenleri Yönet
#define MSG_LEVEL_BED "Tabla Seviyele" //Tabla Seviyele
#define MSG_MOVE_X "X" //X
#define MSG_MOVE_Y "Y" //Y
#define MSG_MOVE_Z "Z" //Z
#define MSG_MOVE_E "Ekstruder" //Ekstruder
#define MSG_MOVE_01MM "0.1mm" //0.1mm
#define MSG_MOVE_1MM "1mm" //1mm
#define MSG_MOVE_10MM "10mm" //10mm
#define MSG_SPEED "H\xfdz" //Hız
#define MSG_BED_Z "Tabla Z" //Tabla Z
#define MSG_NOZZLE "Noz\xfcl" //Nozül
#define MSG_BED "Tabla" //Tabla
#define MSG_FAN_SPEED "Fan H\xfdz\xfd" //Fan Hızı
#define MSG_FLOW "Ak\xfd\xfe" //Akış
#define MSG_CONTROL "Kontrol" //Kontrol
#define MSG_MIN " " LCD_STR_THERMOMETER " Min" // Min
#define MSG_MAX " " LCD_STR_THERMOMETER " Max" // Max
#define MSG_FACTOR " " LCD_STR_THERMOMETER " \xc7\x61rpan" // Çarpan
#define MSG_AUTOTEMP "Autotemp" // Autotemp
#define MSG_ON "On " //On
#define MSG_OFF "Off" //Off
#define MSG_PID_P "PID-P" //PID-P
#define MSG_PID_I "PID-I" //PID-I
#define MSG_PID_D "PID-D" //PID-D
#define MSG_PID_C "PID-C" //PID-C
#define MSG_SELECT "Se\xe7" //Seç
#define MSG_ACC "\xddvme" //İvme
#define MSG_VX_JERK "Vx-Jerk" //Vx-Jerk
#define MSG_VY_JERK "Vy-Jerk" //Vy-Jerk
#define MSG_VZ_JERK "Vz-jerk" //Vz-Jerk
#define MSG_VE_JERK "Ve-jerk" //Ve-Jerk
#define MSG_VMAX "Vmax " //Vmax
#define MSG_VMIN "Vmin" //Vmin
#define MSG_VTRAV_MIN "VTrav min" //Vtrav min
#define MSG_AMAX "Amax " //Amax
#define MSG_A_RETRACT "A-retract" //A-retract
#define MSG_A_TRAVEL "A-travel" //A-travel
#define MSG_XSTEPS "Xsteps/mm" //Xsteps/mm
#define MSG_YSTEPS "Ysteps/mm" //Ysteps/mm
#define MSG_ZSTEPS "Zsteps/mm" //Zsteps/mm
#define MSG_ESTEPS "Esteps/mm" //Esteps/mm
#define MSG_TEMPERATURE "S\xfd\x63\x61kl\xfdk" //Sıcaklık
#define MSG_MOTION "Hareket" //Hareket
#define MSG_VOLUMETRIC "Filaman" //Filaman
#define MSG_VOLUMETRIC_ENABLED "E in mm3" //E in mm3
#define MSG_FILAMENT_DIAM "Fil. \xc7\x61p" //Fil. Çap
#define MSG_CONTRAST "LCD Kontrast" //LCD Kontrast
#define MSG_STORE_EPROM "Haf\xfdzaya Al" //Hafızaya Al
#define MSG_LOAD_EPROM "Haf\xfdzadan Y\xfckle" //Hafızadan Yükle
#define MSG_RESTORE_FAILSAFE "Fabrika Ayarlar\xfd" //Fabrika Ayarları
#define MSG_REFRESH "Yenile" //Yenile
#define MSG_WATCH "Bilgi Ekran\xfd" //Bilgi Ekranı
#define MSG_PREPARE "Haz\xfdrl\xfdk" //Hazırlık
#define MSG_TUNE "Ayar" //Ayar
#define MSG_PAUSE_PRINT "Duraklat" //Duraklat
#define MSG_RESUME_PRINT "S\xfcrd\xfcr" //Sürdür
#define MSG_STOP_PRINT "Durdur" //Durdur
#define MSG_CARD_MENU "SD den Yazd\xfdr" //SD den Yazdır
#define MSG_NO_CARD "SD Kart Yok" //SD Kart Yok
#define MSG_DWELL "Uyku..." //Uyku...
#define MSG_USERWAIT "Operat\xf6r bekleniyor..." //Operatör bekleniyor...
#define MSG_RESUMING "Bask\xfd S\xfcrd\xfcr\xfcl\xfcyor" //Baskı Sürdürülüyor
#define MSG_PRINT_ABORTED "Bask\xfd Durduruldu" //Baskı Durduruldu
#define MSG_NO_MOVE "\xdd\xfelem yok." //İşlem yok.
#define MSG_KILLED "Kilitlendi. " //Kilitlendi.
#define MSG_STOPPED "Durdu. " //Durdu.
#define MSG_CONTROL_RETRACT "Geri \xc7ek mm" //Geri Çek mm
#define MSG_CONTROL_RETRACT_SWAP "Swap Re.mm" //Swap Re.mm
#define MSG_CONTROL_RETRACTF "Geri \xc7ekme V" //Geri Çekme V
#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm" //Hop mm
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm" //UnRet +mm
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "S UnRet+mm" //S UnRet+mm
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V" //UnRet V
#define MSG_AUTORETRACT "AutoRetr." //AutoRetr.
#define MSG_FILAMENTCHANGE "Filaman De\xf0i\xfetir" //Filaman Değiştir
#define MSG_INIT_SDCARD "Init. SD" //Init. SD
#define MSG_CNG_SDCARD "SD De\xf0i\xfetir" //SD Değiştir
#define MSG_ZPROBE_OUT "Z Prob A\xe7\xfdk. Tabla" //Z Prob Açık. Tabla
#define MSG_BLTOUCH_SELFTEST "BLTouch Self-Test" //BLTouch Self-Test
#define MSG_BLTOUCH_RESET "S\xfd\x66\xfdrla BLTouch" //Sıfırla BLTouch
#define MSG_HOME "S\xfd\x66\xfdrla" //Sıfırla
#define MSG_FIRST "\xf6nce" //Önce
#define MSG_ZPROBE_ZOFFSET "Z Offset" //Z Offset
#define MSG_BABYSTEP_X "Miniad\xfdm X" //Miniadım X
#define MSG_BABYSTEP_Y "Miniad\xfdm Y" //Miniadım Y
#define MSG_BABYSTEP_Z "Miniad\xfdm Z" //Miniadım Z
#define MSG_ENDSTOP_ABORT "Endstop iptal" //Endstop iptal
#define MSG_HEATING_FAILED_LCD "Is\xfdnma ba\xfe\x61\x72\xfds\xfdz" //Isınma başarısız
#define MSG_ERR_REDUNDANT_TEMP "Hata: Ge\xe7ersiz S\xfd\x63akl\xfdk" //Hata: Geçersiz Sıcaklık
#define MSG_THERMAL_RUNAWAY "TERMAL PROBLEM" //TERMAL PROBLEM
#define MSG_ERR_MAXTEMP "Hata: MAXSICAKLIK" //Hata: MAXSICAKLIK
#define MSG_ERR_MINTEMP "Hata: MINSICAKLIK" //Hata: MINSICAKLIK
#define MSG_ERR_MAXTEMP_BED "Hata: MAXSIC. TABLA" //Hata: MAXSIC. TABLA
#define MSG_ERR_MINTEMP_BED "Hata: MINSIC. TABLA" //Hata: MINSIC. TABLA
#define MSG_ERR_Z_HOMING "G28 Z Yap\xfdlamaz" //G28 Z Yapılamaz
#define MSG_HALTED "YAZICI DURDURULDU" //YAZICI DURDURULDU
#define MSG_PLEASE_RESET "L\xfctfen resetleyin" //Lütfen resetleyin
#define MSG_SHORT_DAY "G" // One character only //G
#define MSG_SHORT_HOUR "S" // One character only //S
#define MSG_SHORT_MINUTE "D" // One character only //D
#define MSG_HEATING "Is\xfdn\xfdyor..." //Isınıyor...
#define MSG_HEATING_COMPLETE "Is\xfdnma tamam." //Isınma tamam.
#define MSG_BED_HEATING "Tabla Is\xfdn\xfdyor." //Tabla Isınıyor.
#define MSG_BED_DONE "Tabla haz\xfdr." //Tabla hazır.
#define MSG_DELTA_CALIBRATE "Delta Kalibrasyonu" //Delta Kalibrasyonu
#define MSG_DELTA_CALIBRATE_X "Ayarla X" //Ayarla X
#define MSG_DELTA_CALIBRATE_Y "Ayarla Y" //Ayarla Y
#define MSG_DELTA_CALIBRATE_Z "Ayarla Z" //Ayarla Z
#define MSG_DELTA_CALIBRATE_CENTER "Ayarla Merkez" //Ayarla Merkez
#define MSG_INFO_MENU "Yaz\xfd\x63\xfd Hakk\xfdnda" //Yazıcı Hakkında
#define MSG_INFO_PRINTER_MENU "Yaz\xfd\x63\xfd Bilgisi" //Yazıcı Bilgisi
#define MSG_INFO_STATS_MENU "\xddstatistikler" //İstatistikler
#define MSG_INFO_BOARD_MENU "Kontrol\xf6r Bilgisi" //Kontrol Bilgisi
#define MSG_INFO_THERMISTOR_MENU "Termist\xf6rler" //Termistörler
#define MSG_INFO_EXTRUDERS "Ekstruderler" //Ekstruderler
#define MSG_INFO_BAUDRATE "\xddleti\xfeim H\xfdz\xfd" //İletişim Hızı
#define MSG_INFO_PROTOCOL "Protokol" //Protokol
#define MSG_LIGHTS_ON "Ayd\xfdnlatmay\xfd A\xe7" //Aydınlatmayı Aç
#define MSG_LIGHTS_OFF "Ayd\xfdnlatmay\xfd Kapa" //Aydınlaymayı Kapa
#if LCD_WIDTH > 19
#define MSG_INFO_PRINT_COUNT "Bask\xfd Say\xfds\xfd" //Baskı Sayısı
#define MSG_INFO_COMPLETED_PRINTS "Tamamlanan" //Tamamlanan
#define MSG_INFO_PRINT_TIME "Toplam Bask\xfd S\xfcresi" //Toplam Baskı Süresi
#define MSG_INFO_PRINT_LONGEST "En Uzun Bask\xfd S\xfcresi" //En Uzun Baskı Süresi
#define MSG_INFO_PRINT_FILAMENT "Toplam Filaman" //Toplam Filaman
#else
#define MSG_INFO_PRINT_COUNT "Bask\xfd" //Baskı
#define MSG_INFO_COMPLETED_PRINTS "Tamamlanan" //Tamamlanan
#define MSG_INFO_PRINT_TIME "S\xfcre" //Süre
#define MSG_INFO_PRINT_LONGEST "En Uzun" //En Uzun
#define MSG_INFO_PRINT_FILAMENT "Filaman" //Filaman
#endif
#define MSG_INFO_MIN_TEMP "Min S\xfd\x63." //Min Sıcak.
#define MSG_INFO_MAX_TEMP "Max S\xfd\x63." //Max Sıcak.
#define MSG_INFO_PSU "G\xfc\xe7 Kayna\xf0\xfd" //Güç Kaynağı
#define MSG_DRIVE_STRENGTH "\x53\xfc\x72\xfc\x63\xfc \x47\xfc\x63\xfc" //Sürücü Gücü
#define MSG_DAC_PERCENT "\x53\xfc\x72\xfc\x63\xfc %" //Sürücü %
#define MSG_DAC_EEPROM_WRITE "DAC\x27\xfd EEPROM\x27\x61 Yaz" //DAC'ı EEPROM'a Yaz
#define MSG_FILAMENT_CHANGE_HEADER "Filaman De\xf0i\xfetir" //Filaman Değiştir
#define MSG_FILAMENT_CHANGE_OPTION_HEADER "Se\xe7enekler:" //Seçenekler:
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE "Daha Ak\xfdt" //Daha Akıt
#define MSG_FILAMENT_CHANGE_OPTION_RESUME "Bask\xfdy\xfd s\xfcrd\xfcr" //Baskıyı sürdür
#if LCD_HEIGHT >= 4
#define MSG_FILAMENT_CHANGE_INIT_1 "Ba\xfelama bekleniyor" //Başlama bekleniyor
#define MSG_FILAMENT_CHANGE_INIT_2 "filaman\xfdn" //filamanın
#define MSG_FILAMENT_CHANGE_INIT_3 "de\xf0i\xfeimi" //değişimi
#define MSG_FILAMENT_CHANGE_UNLOAD_1 "Bekleniyor" //Bekleniyor
#define MSG_FILAMENT_CHANGE_UNLOAD_2 "filaman\xfdn \xe7\xfdkmas\xfd" //filamanın çıkması
#define MSG_FILAMENT_CHANGE_UNLOAD_3 "" //
#define MSG_FILAMENT_CHANGE_INSERT_1 "Filaman\xfd y\xfckle" //Filamanı yükle
#define MSG_FILAMENT_CHANGE_INSERT_2 "ve devam i\xe7in" //ve devam için
#define MSG_FILAMENT_CHANGE_INSERT_3 "tu\xfea bas..." //tuşa bas...
#define MSG_FILAMENT_CHANGE_LOAD_1 "Bekleniyor" //Bekleniyor
#define MSG_FILAMENT_CHANGE_LOAD_2 "filaman\xfdn y\xfcklenmesi" //filamanın yüklenmesi
#define MSG_FILAMENT_CHANGE_LOAD_3 "" //
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Bekleniyor" //Bekleniyor
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 "filaman akmas\xfd" //filaman akması
#define MSG_FILAMENT_CHANGE_EXTRUDE_3 "" //
#define MSG_FILAMENT_CHANGE_RESUME_1 "Bask\xfdn\xfdn s\xfcrd\xfcr\xfclmesini" //Baskının sürdürülmesini
#define MSG_FILAMENT_CHANGE_RESUME_2 "bekle" //bekle
#define MSG_FILAMENT_CHANGE_RESUME_3 "" //
#else // LCD_HEIGHT < 4
#define MSG_FILAMENT_CHANGE_INIT_1 "L\xfctfen bekleyiniz..." //Lütfen bekleyiniz...
#define MSG_FILAMENT_CHANGE_UNLOAD_1 "\xc7\xfdkart\xfdl\xfdyor..." //Çıkartılıyor...
#define MSG_FILAMENT_CHANGE_INSERT_1 "Y\xfckle ve bas" //Yükle ve bas
#define MSG_FILAMENT_CHANGE_LOAD_1 "Y\xfckl\xfcyor..." //Yüklüyor...
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Ak\xfdt\xfdl\xfdyor..." //Akıtılıyor...
#define MSG_FILAMENT_CHANGE_RESUME_1 "S\xfcrd\xfcr\xfcl\xfcyor..." //Sürdürülüyor...
#endif // LCD_HEIGHT < 4
#endif // LANGUAGE_TR_H