Marlin 2.0 for Flying Bear 4S/5
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
3dlabsio 645ca7af7a M141 Heated Chamber, Temperature rework (#12201) 6 years ago
..
Configuration.h M141 Heated Chamber, Temperature rework (#12201) 6 years ago
Configuration_adv.h M141 Heated Chamber, Temperature rework (#12201) 6 years ago
README.md Relocate configs above Marlin/src folder (#13299) 6 years ago
_Bootscreen.h Relocate configs above Marlin/src folder (#13299) 6 years ago
_Statusscreen.h Relocate configs above Marlin/src folder (#13299) 6 years ago

README.md

Creality Ender Support

This branch is a reverse-engineered version based on the unpublished firmware from Creality. It is not the authoritative source, but has been carefully re-built by looking at their firmware and inferring the base version and configuration they used. The basis is the firmware version from "Jul 31 2017 10:16:30". It is based on Marlin 1.0.1, because

  • 1.0.0 had very different serial output in setup() and overall code structure.
  • 1.0.2 changed the VERSION_STRING to include a leading space, and lcd_init uses SET_INPUT instead of pinMode.

Configurations were found by seeing what code was compiled into the firmware, and constants used there.

For U8Glib, at least version 1.14 and at most 1.17 is used, because

  • 1.12 didn't have the extra speed argument to u8g_InitCom.
  • 1.13 didn't have the soft reset instruction for UC1701 initialization.
  • 1.18 has a new directory structure.

Bitmaps

The bootscreen and custom status screens come from Creality's firmware.