Marlin 2.0 for Flying Bear 4S/5
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
Tim Moore 940c59d9da Overlord i2c LCD with LEDs and buzzer (#14801) 5 years ago
..
Configuration.h Overlord i2c LCD with LEDs and buzzer (#14801) 5 years ago
Configuration_adv.h Add support for M575 (#14757) 5 years ago
README.md Relocate configs above Marlin/src folder (#13299) 6 years ago
_Bootscreen.h Add include guards to some headers 5 years ago
_Statusscreen.h Add include guards to some headers 5 years ago

README.md

Creality Ender Support

This branch is a reverse-engineered version based on the unpublished firmware from Creality. It is not the authoritative source, but has been carefully re-built by looking at their firmware and inferring the base version and configuration they used. The basis is the firmware version from "Jul 31 2017 10:16:30". It is based on Marlin 1.0.1, because

  • 1.0.0 had very different serial output in setup() and overall code structure.
  • 1.0.2 changed the VERSION_STRING to include a leading space, and lcd_init uses SET_INPUT instead of pinMode.

Configurations were found by seeing what code was compiled into the firmware, and constants used there.

For U8Glib, at least version 1.14 and at most 1.17 is used, because

  • 1.12 didn't have the extra speed argument to u8g_InitCom.
  • 1.13 didn't have the soft reset instruction for UC1701 initialization.
  • 1.18 has a new directory structure.

Bitmaps

The bootscreen and custom status screens come from Creality's firmware.

Creality Ender-2 firmware status

The firmware source code has been published on 2018/07/10. It is based on Marlin 1.1. The source code and .hex binaries for all printers (including Ender-2) can be obtained from: https://www.creality3d.cn/download/firmware_c0001

And repositories for CR-10S and Ender-3 can be found here: https://github.com/Creality3DPrinting

The configuration files have been verified to match the original configuration, but further investigation is needed to ensure there aren't any extra changes in the source code.

Ender-2 specific changelog:

  • 2018/10/08 - Updated BED_MAXTEMP to 75 to match the original Creality Ender-2 Firmware (which is now open source)