Marlin 2.0 for Flying Bear 4S/5
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

166 lines
9.2 KiB

/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
#include "tft.h"
#include "../../inc/MarlinConfig.h"
#define ILI9341_MADCTL_MY 0x80 // Row Address Order
#define ILI9341_MADCTL_MX 0x40 // Column Address Order
#define ILI9341_MADCTL_MV 0x20 // Row/Column Exchange
#define ILI9341_MADCTL_ML 0x10 // Vertical Refresh Order
#define ILI9341_MADCTL_BGR 0x08 // RGB-BGR ORDER
#define ILI9341_MADCTL_RGB 0x00
#define ILI9341_MADCTL_MH 0x04 // Horizontal Refresh Order
#define ILI9341_ORIENTATION_UP ILI9341_MADCTL_MY // 240x320 ; Cable on the upper side
#define ILI9341_ORIENTATION_RIGHT ILI9341_MADCTL_MV // 320x240 ; Cable on the right side
#define ILI9341_ORIENTATION_LEFT ILI9341_MADCTL_MY | ILI9341_MADCTL_MX | ILI9341_MADCTL_MV // 320x240 ; Cable on the left side
#define ILI9341_ORIENTATION_DOWN ILI9341_MADCTL_MX // 240x320 ; Cable on the upper side
#ifndef ILI9341_COLOR_RGB
#define ILI9341_COLOR_BGR
#endif
#ifndef ILI9341_ORIENTATION
#define ILI9341_ORIENTATION ILI9341_ORIENTATION_LEFT
#endif
#define ILI9341_MADCTL_DATA (ILI9341_ORIENTATION | TERN(ILI9341_COLOR_BGR, ILI9341_MADCTL_BGR, ILI9341_MADCTL_RGB))
#define ILI9341_NOP 0x00 // No Operation
#define ILI9341_SWRESET 0x01 // Software Reset
#define ILI9341_RDDIDIF 0x04 // Read display identification information
#define ILI9341_RDDST 0x09 // Read Display Status
#define ILI9341_RDDPM 0x0A // Read Display Power Mode
#define ILI9341_RDDMADCTL 0x0B // Read Display MADCTL
#define ILI9341_RDDCOLMOD 0x0C // Read Display Pixel Format
#define ILI9341_RDDIM 0x0D // Read Display Image Format
#define ILI9341_RDDSM 0x0E // Read Display Signal Mode
#define ILI9341_RDDSDR 0x0F // Read Display Self-Diagnostic Result
#define ILI9341_SPLIN 0x10 // Enter Sleep Mode
#define ILI9341_SLPOUT 0x11 // Sleep Out
#define ILI9341_PTLON 0x12 // Partial Mode ON
#define ILI9341_NORON 0x13 // Normal Display Mode ON
#define ILI9341_DINVOFF 0x20 // Display Inversion OFF
#define ILI9341_DINVON 0x21 // Display Inversion ON
#define ILI9341_GAMSET 0x26 // Gamma Set
#define ILI9341_DISPOFF 0x28 // Display OFF
#define ILI9341_DISPON 0x29 // Display ON
#define ILI9341_CASET 0x2A // Column Address Set
#define ILI9341_PASET 0x2B // Page Address Set
#define ILI9341_RAMWR 0x2C // Memory Write
#define ILI9341_RGBSET 0x2D // Color Set
#define ILI9341_RAMRD 0x2E // Memory Read
#define ILI9341_PLTAR 0x30 // Partial Area
#define ILI9341_VSCRDEF 0x33 // Vertical Scrolling Definition
#define ILI9341_TEOFF 0x34 // Tearing Effect Line OFF
#define ILI9341_TEON 0x35 // Tearing Effect Line ON
#define ILI9341_MADCTL 0x36 // Memory Access Control
#define ILI9341_VSCRSADD 0x37 // Vertical Scrolling Start Address
#define ILI9341_IDMOFF 0x38 // Idle Mode OFF
#define ILI9341_IDMON 0x39 // Idle Mode ON
#define ILI9341_PIXSET 0x3A // COLMOD: Pixel Format Set
#define ILI9341_WRMEMC 0x3C // Write Memory Continue
#define ILI9341_RDMEMC 0x3E // Read Memory Continue
#define ILI9341_STE 0x44 // Set Tear Scanline
#define ILI9341_GSCAN 0x45 // Get Scanline
#define ILI9341_WRDISBV 0x51 // Write Display Brightness
#define ILI9341_RDDISBV 0x52 // Read Display Brightness
#define ILI9341_WRCTRLD 0x53 // Write CTRL Display
#define ILI9341_RDCTRLD 0x54 // Read CTRL Display
#define ILI9341_WRCABC 0x55 // Write Content Adaptive Brightness Control
#define ILI9341_RDCABC 0x56 // Read Content Adaptive Brightness Control
#define ILI9341_WRCABCMB 0x5E // Write CABC Minimum Brightness / Backlight Control 1
#define ILI9341_RDCABCMB 0x5F // Read CABC Minimum Brightness / Backlight Control 1
#define ILI9341_RDID1 0xDA // Read ID1
#define ILI9341_RDID2 0xDB // Read ID2
#define ILI9341_RDID3 0xDC // Read ID3
#define ILI9341_IFMODE 0xB0 // RGB Interface Signal Control
#define ILI9341_FRMCTR1 0xB1 // Frame Rate Control (In Normal Mode/Full Colors)
#define ILI9341_FRMCTR2 0xB2 // Frame Rate Control (In Idle Mode/8 colors)
#define ILI9341_FRMCTR3 0xB3 // Frame Rate control (In Partial Mode/Full Colors)
#define ILI9341_INVTR 0xB4 // Display Inversion Control
#define ILI9341_PRCTR 0xB5 // Blanking Porch Control
#define ILI9341_DISCTRL 0xB6 // Display Function Control
#define ILI9341_ETMOD 0xB7 // Entry Mode Set
#define ILI9341_BLCTL1 0xB8 // Backlight Control 1
#define ILI9341_BLCTL2 0xB9 // Backlight Control 2
#define ILI9341_BLCTL3 0xBA // Backlight Control 3
#define ILI9341_BLCTL4 0xBB // Backlight Control 4
#define ILI9341_BLCTL5 0xBC // Backlight Control 5
#define ILI9341_BLCTL7 0xBE // Backlight Control 7
#define ILI9341_BLCTL8 0xBF // Backlight Control 8
#define ILI9341_PWCTRL1 0xC0 // Power Control 1
#define ILI9341_PWCTRL2 0xC1 // Power Control 2
#define ILI9341_VMCTRL1 0xC5 // VCOM Control 1
#define ILI9341_VMCTRL2 0xC7 // VCOM Control 2
#define ILI9341_PWCTRLA 0xCB // Power control A
#define ILI9341_PWCTRLB 0xCF // Power control B
#define ILI9341_NVMWR 0xD0 // NV Memory Write
#define ILI9341_NVMPKEY 0xD1 // NV Memory Protection Key
#define ILI9341_RDNVM 0xD2 // NV Memory Status Read
#define ILI9341_RDID4 0xD3 // Read ID4 - 0x009341
#define ILI9341_PGAMCTRL 0xE0 // Positive Gamma Correction
#define ILI9341_NGAMCTRL 0xE1 // Negative Gamma Correction
#define ILI9341_DGAMCTRL1 0xE2 // Digital Gamma Control 1
#define ILI9341_DGAMCTRL2 0xE3 // Digital Gamma Control 2
#define ILI9341_DRVTCTLA1 0xE8 // Driver timing control A
#define ILI9341_DRVTCTLA2 0xE9 // Driver timing control A
#define ILI9341_DRVTCTLB 0xEA // Driver timing control B
#define ILI9341_PONSEQCTL 0xED // Power on sequence control
#define ILI9341_EN3G 0xF2 // Enable 3G - 3 gamma control
#define ILI9341_IFCTL 0xF6 // Interface Control
#define ILI9341_PUMPRCTL 0xF7 // Pump ratio control
static const uint16_t ili9341_init[] = {
DATASIZE_8BIT,
ESC_REG(ILI9341_SWRESET), ESC_DELAY(100),
ESC_REG(ILI9341_SLPOUT), ESC_DELAY(20),
/*
ESC_REG(ILI9341_PWCTRLA), 0x0039, 0x002C, 0x0000, 0x0034, 0x0002, // Power control A
ESC_REG(ILI9341_PWCTRLB), 0x0000, 0x00C1, 0x0030, // Power control B
ESC_REG(ILI9341_DRVTCTLA1), 0x0085, 0x0000, 0x0078, // Driver timing control A
ESC_REG(ILI9341_DRVTCTLB), 0x0000, 0x0000, // Driver timing control B
ESC_REG(ILI9341_PONSEQCTL), 0x0064, 0x0003, 0x0012, 0x0081, // Power on sequence control
ESC_REG(ILI9341_DISCTRL), 0x0008, 0x0082, 0x0027, // Display Function Control
ESC_REG(ILI9341_PUMPRCTL), 0x0020, // Pump ratio control
ESC_REG(ILI9341_VMCTRL1), 0x003E, 0x0028, // VCOM Control 1
ESC_REG(ILI9341_VMCTRL2), 0x0086, // VCOM Control 2
ESC_REG(ILI9341_FRMCTR1), 0x0000, 0x0018, // Frame Rate Control (In Normal Mode/Full Colors)
ESC_REG(ILI9341_PWCTRL1), 0x0023, // Power Control 1
ESC_REG(ILI9341_PWCTRL2), 0x0010, // Power Control 2
*/
ESC_REG(ILI9341_MADCTL), ILI9341_MADCTL_DATA,
ESC_REG(ILI9341_PIXSET), 0x0055,
/* Gamma Correction */
ESC_REG(ILI9341_EN3G), 0x0000, // 3Gamma Function Disable
ESC_REG(ILI9341_GAMSET), 0x0001, // Gamma curve selected
ESC_REG(ILI9341_PGAMCTRL), 0x000F, 0x0031, 0x002B, 0x000C, 0x000E, 0x0008, 0x004E, 0x00F1, 0x0037, 0x0007, 0x0010, 0x0003, 0x000E, 0x0009, 0x0000,
ESC_REG(ILI9341_NGAMCTRL), 0x0000, 0x000E, 0x0014, 0x0003, 0x0011, 0x0007, 0x0031, 0x00C1, 0x0048, 0x0008, 0x000F, 0x000C, 0x0031, 0x0036, 0x000F,
ESC_REG(ILI9341_NORON),
ESC_REG(ILI9341_DISPON),
ESC_END
};