Marlin 2.0 for Flying Bear 4S/5
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

119 lines
2.9 KiB

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Cheaptronic v2.0 pin assignments
* Built and sold by Michal Dyntar - RRO
* www.reprapobchod.cz
*/
#ifndef __AVR_ATmega2560__
#error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
#endif
#define BOARD_NAME "Cheaptronic v2.0"
#define LARGE_FLASH true
//
// Limit Switches
//
#define X_MIN_PIN 30
#define X_MAX_PIN 31
#define Y_MIN_PIN 32
#define Y_MAX_PIN 33
#define Z_MIN_PIN 34
#define Z_MAX_PIN 35
//
// Steppers
//
#define X_STEP_PIN 17
#define X_DIR_PIN 16
#define X_ENABLE_PIN 48
#define Y_STEP_PIN 54
#define Y_DIR_PIN 47
#define Y_ENABLE_PIN 55
#define Z_STEP_PIN 57
#define Z_DIR_PIN 56
#define Z_ENABLE_PIN 62
#define E0_STEP_PIN 23
#define E0_DIR_PIN 22
#define E0_ENABLE_PIN 24
#define E1_STEP_PIN 26
#define E1_DIR_PIN 25
#define E1_ENABLE_PIN 27
#define E2_STEP_PIN 29
#define E2_DIR_PIN 28
#define E2_ENABLE_PIN 39
//
// Temperature sensors
//
#define TEMP_0_PIN 15
#define TEMP_1_PIN 13
#define TEMP_2_PIN 14
#define TEMP_3_PIN 11
#define TEMP_BED_PIN 12
//
// Heaters / Fans
//
#define HEATER_0_PIN 6
#define HEATER_1_PIN 7
#define HEATER_2_PIN 8
#define HEATER_BED_PIN 9
//
// LCD
//
#define LCD_PINS_RS 19
#define LCD_PINS_ENABLE 42
#define LCD_PINS_D4 18
#define LCD_PINS_D5 38
#define LCD_PINS_D6 41
#define LCD_PINS_D7 40
//
// SD CARD, ROTARY ENCODER, BEEPER
//
#define SDPOWER -1
#define SDSS 53
#define SD_DETECT_PIN 49
#define BEEPER_PIN 44
#define BTN_EN1 11
#define BTN_EN2 12
#define BTN_ENC 43
//
// Other board specific pins
//
#define FILWIDTH_PIN 37
#define LED_PIN 13
#define SPINDLE_ENABLE_PIN 4
#define FAN_PIN 3
#define PS_ON_PIN 45
#define KILL_PIN 46