Marlin 2.0 for Flying Bear 4S/5
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

238 lines
14 KiB

/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Aragonese
*
* LCD Menu Messages
* See also https://marlinfw.org/docs/development/lcd_language.html
*/
#define DISPLAY_CHARSET_ISO10646_1
#define NOT_EXTENDED_ISO10646_1_5X7
namespace Language_an {
using namespace Language_en; // Inherit undefined strings from English
constexpr uint8_t CHARSIZE = 1;
LSTR LANGUAGE = _UxGT("Aragonese");
LSTR WELCOME_MSG = MACHINE_NAME _UxGT(" parada.");
LSTR MSG_MEDIA_INSERTED = _UxGT("Tarcheta mesa");
LSTR MSG_MEDIA_REMOVED = _UxGT("Tarcheta sacada");
LSTR MSG_LCD_ENDSTOPS = _UxGT("Endstops"); // Max length 8 characters
LSTR MSG_MAIN = _UxGT("Menu prencipal");
LSTR MSG_RUN_AUTO_FILES = _UxGT("Inicio automatico");
LSTR MSG_DISABLE_STEPPERS = _UxGT("Amortar motors");
LSTR MSG_HOMING = _UxGT("Orichen");
LSTR MSG_AUTO_HOME = _UxGT("Levar a l'orichen");
LSTR MSG_AUTO_HOME_X = _UxGT("Orichen X");
LSTR MSG_AUTO_HOME_Y = _UxGT("Orichen Y");
LSTR MSG_AUTO_HOME_Z = _UxGT("Orichen Z");
LSTR MSG_LEVEL_BED_HOMING = _UxGT("Orichen XYZ");
LSTR MSG_LEVEL_BED_WAITING = _UxGT("Encetar (pretar)");
LSTR MSG_LEVEL_BED_NEXT_POINT = _UxGT("Vinient punto");
LSTR MSG_LEVEL_BED_DONE = _UxGT("Nivelacion feita!");
LSTR MSG_SET_HOME_OFFSETS = _UxGT("Achustar desfases");
LSTR MSG_HOME_OFFSETS_APPLIED = _UxGT("Desfase aplicau");
LSTR MSG_SET_ORIGIN = _UxGT("Establir orichen");
#if HAS_PREHEAT
LSTR MSG_PREHEAT_1 = _UxGT("Precalentar ") PREHEAT_1_LABEL;
LSTR MSG_PREHEAT_1_H = _UxGT("Precalentar ") PREHEAT_1_LABEL " ~";
LSTR MSG_PREHEAT_1_END = _UxGT("Precal. ") PREHEAT_1_LABEL _UxGT(" Boquilla");
LSTR MSG_PREHEAT_1_END_E = _UxGT("Precal. ") PREHEAT_1_LABEL _UxGT(" Boquilla ~");
LSTR MSG_PREHEAT_1_ALL = _UxGT("Precalentar ") PREHEAT_1_LABEL _UxGT(" Tot");
LSTR MSG_PREHEAT_1_BEDONLY = _UxGT("Precalentar ") PREHEAT_1_LABEL _UxGT(" Base");
LSTR MSG_PREHEAT_1_SETTINGS = _UxGT("Precalentar ") PREHEAT_1_LABEL _UxGT(" Conf");
LSTR MSG_PREHEAT_M = _UxGT("Precalentar $");
LSTR MSG_PREHEAT_M_H = _UxGT("Precalentar $ ~");
LSTR MSG_PREHEAT_M_END = _UxGT("Precal. $ Boquilla");
LSTR MSG_PREHEAT_M_END_E = _UxGT("Precal. $ Boquilla ~");
LSTR MSG_PREHEAT_M_ALL = _UxGT("Precalentar $ Tot");
LSTR MSG_PREHEAT_M_BEDONLY = _UxGT("Precalentar $ Base");
LSTR MSG_PREHEAT_M_SETTINGS = _UxGT("Precalentar $ Conf");
#endif
LSTR MSG_COOLDOWN = _UxGT("Enfriar");
LSTR MSG_SWITCH_PS_ON = _UxGT("Enchegar Fuent");
LSTR MSG_SWITCH_PS_OFF = _UxGT("Amortar Fuent");
LSTR MSG_EXTRUDE = _UxGT("Extruir");
LSTR MSG_RETRACT = _UxGT("Retraer");
LSTR MSG_MOVE_AXIS = _UxGT("Mover Eixes");
LSTR MSG_BED_LEVELING = _UxGT("Nivelar base");
LSTR MSG_LEVEL_BED = _UxGT("Nivelar base");
LSTR MSG_MOVE_X = _UxGT("Mover X");
LSTR MSG_MOVE_Y = _UxGT("Mover Y");
LSTR MSG_MOVE_Z = _UxGT("Mover Z");
LSTR MSG_MOVE_E = _UxGT("Extrusor");
LSTR MSG_MOVE_EN = _UxGT("Extrusor *");
LSTR MSG_MOVE_N_MM = _UxGT("Mover %smm");
LSTR MSG_MOVE_01MM = _UxGT("Mover 0.1mm");
LSTR MSG_MOVE_1MM = _UxGT("Mover 1mm");
LSTR MSG_MOVE_10MM = _UxGT("Mover 10mm");
LSTR MSG_MOVE_100MM = _UxGT("Mover 100mm");
LSTR MSG_SPEED = _UxGT("Velocidat");
LSTR MSG_BED_Z = _UxGT("Base Z");
LSTR MSG_NOZZLE = _UxGT("Boquilla");
LSTR MSG_NOZZLE_N = _UxGT("Boquilla ~");
LSTR MSG_BED = _UxGT("Base");
LSTR MSG_FAN_SPEED = _UxGT("Ixoriador");
LSTR MSG_FAN_SPEED_N = _UxGT("Ixoriador ~");
LSTR MSG_FLOW = _UxGT("Fluxo");
LSTR MSG_FLOW_N = _UxGT("Fluxo ~");
LSTR MSG_CONTROL = _UxGT("Control");
LSTR MSG_AUTOTEMP = _UxGT("Temperatura Auto.");
LSTR MSG_SELECT = _UxGT("Trigar");
LSTR MSG_SELECT_E = _UxGT("Trigar *");
LSTR MSG_ACC = _UxGT("Aceleracion");
LSTR MSG_VTRAV_MIN = _UxGT("Vel. viache min");
LSTR MSG_ACCELERATION = _UxGT("Accel");
LSTR MSG_AMAX_A = _UxGT("Acel. max ") LCD_STR_A;
LSTR MSG_AMAX_B = _UxGT("Acel. max ") LCD_STR_B;
LSTR MSG_AMAX_C = _UxGT("Acel. max ") LCD_STR_C;
LSTR MSG_AMAX_I = _UxGT("Acel. max ") LCD_STR_I;
LSTR MSG_AMAX_J = _UxGT("Acel. max ") LCD_STR_J;
LSTR MSG_AMAX_K = _UxGT("Acel. max ") LCD_STR_K;
LSTR MSG_AMAX_E = _UxGT("Acel. max ") LCD_STR_E;
LSTR MSG_AMAX_EN = _UxGT("Acel. max *");
LSTR MSG_A_RETRACT = _UxGT("Acel. retrac.");
LSTR MSG_A_TRAVEL = _UxGT("Acel. Viaje");
LSTR MSG_STEPS_PER_MM = _UxGT("Trangos/mm");
LSTR MSG_A_STEPS = LCD_STR_A _UxGT(" trangos/mm");
LSTR MSG_B_STEPS = LCD_STR_B _UxGT(" trangos/mm");
LSTR MSG_C_STEPS = LCD_STR_C _UxGT(" trangos/mm");
LSTR MSG_I_STEPS = LCD_STR_I _UxGT(" trangos/mm");
LSTR MSG_J_STEPS = LCD_STR_J _UxGT(" trangos/mm");
LSTR MSG_K_STEPS = LCD_STR_K _UxGT(" trangos/mm");
LSTR MSG_E_STEPS = _UxGT("E trangos/mm");
LSTR MSG_EN_STEPS = _UxGT("* trangos/mm");
LSTR MSG_TEMPERATURE = _UxGT("Temperatura");
LSTR MSG_MOTION = _UxGT("Movimiento");
LSTR MSG_FILAMENT = _UxGT("Filamento");
LSTR MSG_VOLUMETRIC_ENABLED = _UxGT("E in mm") SUPERSCRIPT_THREE;
LSTR MSG_FILAMENT_DIAM = _UxGT("Fil. Dia.");
LSTR MSG_FILAMENT_DIAM_E = _UxGT("Fil. Dia. *");
LSTR MSG_CONTRAST = _UxGT("Contraste");
LSTR MSG_STORE_EEPROM = _UxGT("Alzar memoria");
LSTR MSG_LOAD_EEPROM = _UxGT("Cargar memoria");
LSTR MSG_RESTORE_DEFAULTS = _UxGT("Restaurar memoria");
LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("Tornar a cargar");
LSTR MSG_INFO_SCREEN = _UxGT("Informacion");
LSTR MSG_PREPARE = _UxGT("Preparar");
LSTR MSG_TUNE = _UxGT("Achustar");
LSTR MSG_PAUSE_PRINT = _UxGT("Pausar impresion");
LSTR MSG_RESUME_PRINT = _UxGT("Contin. impresion");
LSTR MSG_STOP_PRINT = _UxGT("Detener Impresion");
LSTR MSG_MEDIA_MENU = _UxGT("Menu de SD");
LSTR MSG_NO_MEDIA = _UxGT("No i hai tarcheta");
LSTR MSG_DWELL = _UxGT("Reposo...");
LSTR MSG_USERWAIT = _UxGT("Aguardand ordines");
LSTR MSG_PRINT_ABORTED = _UxGT("Impres. cancelada");
LSTR MSG_NO_MOVE = _UxGT("Sin movimiento");
LSTR MSG_KILLED = _UxGT("Aturada d'emerch.");
LSTR MSG_STOPPED = _UxGT("Aturada.");
LSTR MSG_CONTROL_RETRACT = _UxGT("Retraer mm");
LSTR MSG_CONTROL_RETRACT_SWAP = _UxGT("Swap Retraer mm");
LSTR MSG_CONTROL_RETRACTF = _UxGT("Retraer F");
LSTR MSG_CONTROL_RETRACT_ZHOP = _UxGT("Devantar mm");
LSTR MSG_CONTROL_RETRACT_RECOVER = _UxGT("DesRet mm");
LSTR MSG_CONTROL_RETRACT_RECOVER_SWAP = _UxGT("Swap DesRet mm");
LSTR MSG_CONTROL_RETRACT_RECOVERF = _UxGT("DesRet F");
LSTR MSG_AUTORETRACT = _UxGT("Retraccion auto.");
LSTR MSG_FILAMENTCHANGE = _UxGT("Cambear filamento");
LSTR MSG_FILAMENTCHANGE_E = _UxGT("Cambear filamento *");
LSTR MSG_ATTACH_MEDIA = _UxGT("Encetan. tarcheta");
LSTR MSG_CHANGE_MEDIA = _UxGT("Cambiar tarcheta");
LSTR MSG_ZPROBE_OUT = _UxGT("Sonda Z fuera");
LSTR MSG_BLTOUCH_RESET = _UxGT("Reset BLTouch");
LSTR MSG_ZPROBE_ZOFFSET = _UxGT("Desfase Z");
LSTR MSG_BABYSTEP_X = _UxGT("Micropaso X");
LSTR MSG_BABYSTEP_Y = _UxGT("Micropaso Y");
LSTR MSG_BABYSTEP_Z = _UxGT("Micropaso Z");
LSTR MSG_ENDSTOP_ABORT = _UxGT("Cancelado - Endstop");
LSTR MSG_HEATING_FAILED_LCD = _UxGT("Error: en calentar");
LSTR MSG_ERR_REDUNDANT_TEMP = _UxGT("Error: temperatura");
LSTR MSG_THERMAL_RUNAWAY = _UxGT("Error de temperatura");
LSTR MSG_ERR_MAXTEMP = _UxGT("Error: Temp Max");
LSTR MSG_ERR_MINTEMP = _UxGT("Error: Temp Min");
LSTR MSG_HALTED = _UxGT("IMPRESORA ATURADA");
LSTR MSG_PLEASE_RESET = _UxGT("Per favor reinic.");
LSTR MSG_HEATING = _UxGT("Calentando...");
LSTR MSG_BED_HEATING = _UxGT("Calentando base...");
LSTR MSG_DELTA_CALIBRATE = _UxGT("Calibracion Delta");
LSTR MSG_DELTA_CALIBRATE_X = _UxGT("Calibrar X");
LSTR MSG_DELTA_CALIBRATE_Y = _UxGT("Calibrar Y");
LSTR MSG_DELTA_CALIBRATE_Z = _UxGT("Calibrar Z");
LSTR MSG_DELTA_CALIBRATE_CENTER = _UxGT("Calibrar Centro");
LSTR MSG_INFO_MENU = _UxGT("Inf. Impresora");
LSTR MSG_INFO_PRINTER_MENU = _UxGT("Inf. Impresora");
LSTR MSG_INFO_STATS_MENU = _UxGT("Estadisticas Imp.");
LSTR MSG_INFO_BOARD_MENU = _UxGT("Inf. Controlador");
LSTR MSG_INFO_THERMISTOR_MENU = _UxGT("Termistors");
LSTR MSG_INFO_EXTRUDERS = _UxGT("Extrusors");
LSTR MSG_INFO_BAUDRATE = _UxGT("Baudios");
LSTR MSG_INFO_PROTOCOL = _UxGT("Protocolo");
LSTR MSG_CASE_LIGHT = _UxGT("Luz");
#if LCD_WIDTH >= 20
LSTR MSG_INFO_PRINT_COUNT = _UxGT("Conteo de impresion");
LSTR MSG_INFO_COMPLETED_PRINTS = _UxGT("Completadas");
LSTR MSG_INFO_PRINT_TIME = _UxGT("Tiempo total d'imp.");
LSTR MSG_INFO_PRINT_LONGEST = _UxGT("Impresion mas larga");
LSTR MSG_INFO_PRINT_FILAMENT = _UxGT("Total d'extrusion");
#else
LSTR MSG_INFO_PRINT_COUNT = _UxGT("Impresions");
LSTR MSG_INFO_COMPLETED_PRINTS = _UxGT("Completadas");
LSTR MSG_INFO_PRINT_TIME = _UxGT("Total");
LSTR MSG_INFO_PRINT_LONGEST = _UxGT("Mas larga");
LSTR MSG_INFO_PRINT_FILAMENT = _UxGT("Extrusion");
#endif
LSTR MSG_INFO_MIN_TEMP = _UxGT("Temperatura menima");
LSTR MSG_INFO_MAX_TEMP = _UxGT("Temperatura maxima");
LSTR MSG_INFO_PSU = _UxGT("Fuente de aliment");
LSTR MSG_DRIVE_STRENGTH = _UxGT("Fuerza d'o driver");
LSTR MSG_DAC_EEPROM_WRITE = _UxGT("Escri. DAC EEPROM");
LSTR MSG_FILAMENT_CHANGE_OPTION_RESUME = _UxGT("Resumir imp.");
//
// Filament Change screens show up to 3 lines on a 4-line display
// ...or up to 2 lines on a 3-line display
//
#if LCD_HEIGHT >= 4
// Up to 3 lines allowed
LSTR MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_3_LINE("Aguardand iniciar", "d'o filamento", "cambear"));
LSTR MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_3_LINE("Meta o filamento", "y prete lo boton", "pa continar..."));
#else // LCD_HEIGHT < 4
// Up to 2 lines allowed
LSTR MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_2_LINE("Aguardand iniciar", "d'o fil. cambear"));
LSTR MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_2_LINE("Meta o filamento", "y prete lo boton"));
#endif // LCD_HEIGHT < 4
LSTR MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_2_LINE("Aguardando a", "expulsar filament"));
LSTR MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_2_LINE("Aguardando a", "cargar filamento"));
LSTR MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_2_LINE("Aguardando impre.", "pa continar"));
}