Marlin 2.0 for Flying Bear 4S/5
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

231 lines
7.0 KiB

/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
//
// Tune Menu
//
#include "../../inc/MarlinConfigPre.h"
#if HAS_LCD_MENU
#include "menu.h"
#include "../../module/motion.h"
#include "../../module/planner.h"
#include "../../module/temperature.h"
#include "../../Marlin.h"
#if HAS_LEVELING
#include "../../feature/bedlevel/bedlevel.h"
#endif
#if ENABLED(SINGLENOZZLE)
#include "../../module/tool_change.h"
#endif
#if ENABLED(BABYSTEPPING)
#include "../../feature/babystep.h"
#include "../lcdprint.h"
#if HAS_GRAPHICAL_LCD
#include "../dogm/ultralcd_DOGM.h"
#endif
void _lcd_babystep(const AxisEnum axis, PGM_P const msg) {
if (ui.use_click()) return ui.goto_previous_screen_no_defer();
if (ui.encoderPosition) {
const int16_t steps = int16_t(ui.encoderPosition) * (
#if ENABLED(BABYSTEP_XY)
axis != Z_AXIS ? BABYSTEP_MULTIPLICATOR_XY :
#endif
BABYSTEP_MULTIPLICATOR_Z
);
ui.encoderPosition = 0;
ui.refresh(LCDVIEW_REDRAW_NOW);
babystep.add_steps(axis, steps);
}
if (ui.should_draw()) {
const float spm = planner.steps_to_mm[axis];
draw_edit_screen(msg, ftostr54sign(spm * babystep.accum));
#if ENABLED(BABYSTEP_DISPLAY_TOTAL)
const bool in_view = (true
#if HAS_GRAPHICAL_LCD
&& PAGE_CONTAINS(LCD_PIXEL_HEIGHT - MENU_FONT_HEIGHT, LCD_PIXEL_HEIGHT - 1)
#endif
);
if (in_view) {
#if HAS_GRAPHICAL_LCD
ui.set_font(FONT_MENU);
lcd_moveto(0, LCD_PIXEL_HEIGHT - MENU_FONT_DESCENT);
#else
lcd_moveto(0, LCD_HEIGHT - 1);
#endif
lcd_put_u8str_P(GET_TEXT(MSG_BABYSTEP_TOTAL));
lcd_put_wchar(':');
lcd_put_u8str(ftostr54sign(spm * babystep.axis_total[BS_TOTAL_AXIS(axis)]));
}
#endif
}
}
inline void _lcd_babystep_go(const screenFunc_t screen) {
ui.goto_screen(screen);
ui.defer_status_screen();
babystep.accum = 0;
}
#if ENABLED(BABYSTEP_XY)
void _lcd_babystep_x() { _lcd_babystep(X_AXIS, GET_TEXT(MSG_BABYSTEP_X)); }
void _lcd_babystep_y() { _lcd_babystep(Y_AXIS, GET_TEXT(MSG_BABYSTEP_Y)); }
#endif
#if DISABLED(BABYSTEP_ZPROBE_OFFSET)
void _lcd_babystep_z() { _lcd_babystep(Z_AXIS, GET_TEXT(MSG_BABYSTEP_Z)); }
void lcd_babystep_z() { _lcd_babystep_go(_lcd_babystep_z); }
#endif
#endif // BABYSTEPPING
void menu_tune() {
START_MENU();
BACK_ITEM(MSG_MAIN);
//
// Speed:
//
EDIT_ITEM(int3, MSG_SPEED, &feedrate_percentage, 10, 999);
//
// Manual bed leveling, Bed Z:
//
#if BOTH(MESH_BED_LEVELING, LCD_BED_LEVELING)
EDIT_ITEM(float43, MSG_BED_Z, &mbl.z_offset, -1, 1);
#endif
//
// Nozzle:
// Nozzle [1-4]:
//
#if HOTENDS == 1
EDIT_ITEM_FAST(int3, MSG_NOZZLE, &thermalManager.temp_hotend[0].target, 0, HEATER_0_MAXTEMP - 15, []{ thermalManager.start_watching_hotend(0); });
#elif HOTENDS > 1
#define EDIT_NOZZLE(N) EDIT_ITEM_FAST(int3, MSG_NOZZLE_##N, &thermalManager.temp_hotend[N].target, 0, HEATER_##N##_MAXTEMP - 15, []{ thermalManager.start_watching_hotend(N); })
EDIT_NOZZLE(0);
EDIT_NOZZLE(1);
#if HOTENDS > 2
EDIT_NOZZLE(2);
#if HOTENDS > 3
EDIT_NOZZLE(3);
#if HOTENDS > 4
EDIT_NOZZLE(4);
#if HOTENDS > 5
EDIT_NOZZLE(5);
#endif // HOTENDS > 5
#endif // HOTENDS > 4
#endif // HOTENDS > 3
#endif // HOTENDS > 2
#endif // HOTENDS > 1
#if ENABLED(SINGLENOZZLE)
EDIT_ITEM_FAST(uint16_3, MSG_NOZZLE_STANDBY, &singlenozzle_temp[active_extruder ? 0 : 1], 0, HEATER_0_MAXTEMP - 15);
#endif
//
// Bed:
//
#if HAS_HEATED_BED
EDIT_ITEM_FAST(int3, MSG_BED, &thermalManager.temp_bed.target, 0, BED_MAXTEMP - 10, thermalManager.start_watching_bed);
#endif
//
// Fan Speed:
//
#if FAN_COUNT > 0
#if HAS_FAN0
editable.uint8 = thermalManager.fan_speed[0];
EDIT_ITEM_FAST(percent, MSG_FIRST_FAN_SPEED, &editable.uint8, 0, 255, []{ thermalManager.set_fan_speed(0, editable.uint8); });
#if ENABLED(EXTRA_FAN_SPEED)
EDIT_ITEM_FAST(percent, MSG_FIRST_EXTRA_FAN_SPEED, &thermalManager.new_fan_speed[0], 3, 255);
#endif
#endif
#if HAS_FAN1
editable.uint8 = thermalManager.fan_speed[1];
EDIT_ITEM_FAST(percent, MSG_FAN_SPEED_2, &editable.uint8, 0, 255, []{ thermalManager.set_fan_speed(1, editable.uint8); });
#if ENABLED(EXTRA_FAN_SPEED)
EDIT_ITEM_FAST(percent, MSG_EXTRA_FAN_SPEED_2, &thermalManager.new_fan_speed[1], 3, 255);
#endif
#endif
#if HAS_FAN2
editable.uint8 = thermalManager.fan_speed[2];
EDIT_ITEM_FAST(percent, MSG_FAN_SPEED_3, &editable.uint8, 0, 255, []{ thermalManager.set_fan_speed(2, editable.uint8); });
#if ENABLED(EXTRA_FAN_SPEED)
EDIT_ITEM_FAST(percent, MSG_EXTRA_FAN_SPEED_3, &thermalManager.new_fan_speed[2], 3, 255);
#endif
#endif
#endif // FAN_COUNT > 0
//
// Flow:
// Flow [1-5]:
//
#if EXTRUDERS == 1
EDIT_ITEM(int3, MSG_FLOW, &planner.flow_percentage[0], 10, 999, []{ planner.refresh_e_factor(0); });
#elif EXTRUDERS
EDIT_ITEM(int3, MSG_FLOW, &planner.flow_percentage[active_extruder], 10, 999, []{ planner.refresh_e_factor(active_extruder); });
#define EDIT_FLOW(N) EDIT_ITEM(int3, MSG_FLOW_##N, &planner.flow_percentage[N], 10, 999, []{ planner.refresh_e_factor(N); })
EDIT_FLOW(0);
EDIT_FLOW(1);
#if EXTRUDERS > 2
EDIT_FLOW(2);
#if EXTRUDERS > 3
EDIT_FLOW(3);
#if EXTRUDERS > 4
EDIT_FLOW(4);
#if EXTRUDERS > 5
EDIT_FLOW(5);
#endif // EXTRUDERS > 5
#endif // EXTRUDERS > 4
#endif // EXTRUDERS > 3
#endif // EXTRUDERS > 2
#endif // EXTRUDERS
//
// Babystep X:
// Babystep Y:
// Babystep Z:
//
#if ENABLED(BABYSTEPPING)
#if ENABLED(BABYSTEP_XY)
SUBMENU(MSG_BABYSTEP_X, []{ _lcd_babystep_go(_lcd_babystep_x); });
SUBMENU(MSG_BABYSTEP_Y, []{ _lcd_babystep_go(_lcd_babystep_y); });
#endif
#if ENABLED(BABYSTEP_ZPROBE_OFFSET)
SUBMENU(MSG_ZPROBE_ZOFFSET, lcd_babystep_zoffset);
#else
SUBMENU(MSG_BABYSTEP_Z, lcd_babystep_z);
#endif
#endif
END_MENU();
}
#endif // HAS_LCD_MENU