Marlin_FB4S/Marlin/language.h


								#ifndef LANGUAGE_H

								#define LANGUAGE_H


								// NOTE: IF YOU CHANGE THIS FILE / MERGE THIS FILE WITH CHANGES

								//

								//   ==> ALWAYS TRY TO COMPILE MARLIN WITH/WITHOUT "ULTIPANEL" / "ULTRALCD" / "SDSUPPORT" #define IN "Configuration.h"

								//   ==> ALSO TRY ALL AVAILABLE "LANGUAGE_CHOICE" OPTIONS


								// Languages

								// 1  English

								// 2  Polish

								// 3  French

								// 4  German

								// 5  Spanish

								// 6  Russian

								// 7  Italian

								// 8  Portuguese

								// 9  Finnish

								// 10 Aragonese

								// 11 Dutch

								// 12 Catalan

								// 13 Basque-Euskera


								#ifndef LANGUAGE_CHOICE

									#define LANGUAGE_CHOICE 1  // Pick your language from the list above

								#endif


								#define PROTOCOL_VERSION "1.0"


								#if MOTHERBOARD == 7 || MOTHERBOARD == 71 || MOTHERBOARD == 72

									#define MACHINE_NAME "Ultimaker"

									#define FIRMWARE_URL "http://firmware.ultimaker.com"

								#elif MOTHERBOARD == 80

									#define MACHINE_NAME "Rumba"

									#define FIRMWARE_URL "https://github.com/ErikZalm/Marlin/"

								#elif MOTHERBOARD == 77

									#define MACHINE_NAME "3Drag"

									#define FIRMWARE_URL "http://3dprint.elettronicain.it/"

								#elif MOTHERBOARD == 88

									#define MACHINE_NAME "Makibox"

									#define FIRMWARE_URL "https://github.com/ErikZalm/Marlin/"

								#else

									#ifdef CUSTOM_MENDEL_NAME

										#define MACHINE_NAME CUSTOM_MENDEL_NAME

									#else

										#define MACHINE_NAME "Mendel"

									#endif


								// Default firmware set to Mendel

									#define FIRMWARE_URL "https://github.com/ErikZalm/Marlin/"

								#endif


								#ifndef MACHINE_UUID

								   #define MACHINE_UUID "00000000-0000-0000-0000-000000000000"

								#endif


								#define STRINGIFY_(n) #n

								#define STRINGIFY(n) STRINGIFY_(n)


								// Common LCD messages

								/* nothing here as of yet */


								// Common serial messages

								#define MSG_MARLIN "Marlin"


								// Serial Console Messages (do not translate those!)


								#define MSG_Enqueing "enqueing \""

								#define MSG_POWERUP "PowerUp"

								#define MSG_EXTERNAL_RESET " External Reset"

								#define MSG_BROWNOUT_RESET " Brown out Reset"

								#define MSG_WATCHDOG_RESET " Watchdog Reset"

								#define MSG_SOFTWARE_RESET " Software Reset"

								#define MSG_AUTHOR " | Author: "

								#define MSG_CONFIGURATION_VER " Last Updated: "

								#define MSG_FREE_MEMORY " Free Memory: "

								#define MSG_PLANNER_BUFFER_BYTES "  PlannerBufferBytes: "

								#define MSG_OK "ok"

								#define MSG_FILE_SAVED "Done saving file."

								#define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line: "

								#define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: "

								#define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: "

								#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line: "

								#define MSG_FILE_PRINTED "Done printing file"

								#define MSG_BEGIN_FILE_LIST "Begin file list"

								#define MSG_END_FILE_LIST "End file list"

								#define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "

								#define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "

								#define MSG_M200_INVALID_EXTRUDER "M200 Invalid extruder "

								#define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder "

								#define MSG_M221_INVALID_EXTRUDER "M221 Invalid extruder "

								#define MSG_ERR_NO_THERMISTORS "No thermistors - no temperature"

								#define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "

								#define MSG_HEATING "Heating..."

								#define MSG_HEATING_COMPLETE "Heating done."

								#define MSG_BED_HEATING "Bed Heating."

								#define MSG_BED_DONE "Bed done."

								#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"

								#define MSG_COUNT_X " Count X: "

								#define MSG_ERR_KILLED "Printer halted. kill() called!"

								#define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"

								#define MSG_RESEND "Resend: "

								#define MSG_UNKNOWN_COMMAND "Unknown command: \""

								#define MSG_ACTIVE_EXTRUDER "Active Extruder: "

								#define MSG_INVALID_EXTRUDER "Invalid extruder"

								#define MSG_X_MIN "x_min: "

								#define MSG_X_MAX "x_max: "

								#define MSG_Y_MIN "y_min: "

								#define MSG_Y_MAX "y_max: "

								#define MSG_Z_MIN "z_min: "

								#define MSG_Z_MAX "z_max: "

								#define MSG_M119_REPORT "Reporting endstop status"

								#define MSG_ENDSTOP_HIT "TRIGGERED"

								#define MSG_ENDSTOP_OPEN "open"

								#define MSG_HOTEND_OFFSET "Hotend offsets:"


								#define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"

								#define MSG_SD_INIT_FAIL "SD init fail"

								#define MSG_SD_VOL_INIT_FAIL "volume.init failed"

								#define MSG_SD_OPENROOT_FAIL "openRoot failed"

								#define MSG_SD_CARD_OK "SD card ok"

								#define MSG_SD_WORKDIR_FAIL "workDir open failed"

								#define MSG_SD_OPEN_FILE_FAIL "open failed, File: "

								#define MSG_SD_FILE_OPENED "File opened: "

								#define MSG_SD_SIZE " Size: "

								#define MSG_SD_FILE_SELECTED "File selected"

								#define MSG_SD_WRITE_TO_FILE "Writing to file: "

								#define MSG_SD_PRINTING_BYTE "SD printing byte "

								#define MSG_SD_NOT_PRINTING "Not SD printing"

								#define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"

								#define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: "


								#define MSG_STEPPER_TOO_HIGH "Steprate too high: "

								#define MSG_ENDSTOPS_HIT "endstops hit: "

								#define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"

								#define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"

								#define MSG_BABYSTEPPING_X "Babystepping X"

								#define MSG_BABYSTEPPING_Y "Babystepping Y"

								#define MSG_BABYSTEPPING_Z "Babystepping Z"

								#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"


								#if LANGUAGE_CHOICE == 1


								// LCD Menu Messages

								// Please note these are limited to 17 characters!


									#define WELCOME_MSG MACHINE_NAME " ready."

									#define MSG_SD_INSERTED "Card inserted"

									#define MSG_SD_REMOVED "Card removed"

									#define MSG_MAIN "Main"

									#define MSG_AUTOSTART "Autostart"

									#define MSG_DISABLE_STEPPERS "Disable steppers"

									#define MSG_AUTO_HOME "Auto home"

									#define MSG_SET_ORIGIN "Set origin"

									#define MSG_PREHEAT_PLA "Preheat PLA"

									#define MSG_PREHEAT_PLA0 "Preheat PLA 1"

									#define MSG_PREHEAT_PLA1 "Preheat PLA 2"

									#define MSG_PREHEAT_PLA2 "Preheat PLA 3"

									#define MSG_PREHEAT_PLA012 "Preheat PLA All"

									#define MSG_PREHEAT_PLA_BEDONLY "Preheat PLA Bed"

									#define MSG_PREHEAT_PLA_SETTINGS "Preheat PLA conf"

									#define MSG_PREHEAT_ABS "Preheat ABS"

									#define MSG_PREHEAT_ABS0 "Preheat ABS 1"

									#define MSG_PREHEAT_ABS1 "Preheat ABS 2"

									#define MSG_PREHEAT_ABS2 "Preheat ABS 3"

									#define MSG_PREHEAT_ABS012 "Preheat ABS All"

									#define MSG_PREHEAT_ABS_BEDONLY "Preheat ABS Bed"

									#define MSG_PREHEAT_ABS_SETTINGS "Preheat ABS conf"

									#define MSG_COOLDOWN "Cooldown"

									#define MSG_SWITCH_PS_ON "Switch power on"

									#define MSG_SWITCH_PS_OFF "Switch power off"

									#define MSG_EXTRUDE "Extrude"

									#define MSG_RETRACT "Retract"

									#define MSG_MOVE_AXIS "Move axis"

									#define MSG_MOVE_X "Move X"

									#define MSG_MOVE_Y "Move Y"

									#define MSG_MOVE_Z "Move Z"

									#define MSG_MOVE_E "Extruder"

									#define MSG_MOVE_E1 "Extruder2"

									#define MSG_MOVE_E2 "Extruder3"

									#define MSG_MOVE_01MM "Move 0.1mm"

									#define MSG_MOVE_1MM "Move 1mm"

									#define MSG_MOVE_10MM "Move 10mm"

									#define MSG_SPEED "Speed"

									#define MSG_NOZZLE "Nozzle"

									#define MSG_NOZZLE1 "Nozzle2"

									#define MSG_NOZZLE2 "Nozzle3"

									#define MSG_BED "Bed"

									#define MSG_FAN_SPEED "Fan speed"

									#define MSG_FLOW "Flow"

									#define MSG_FLOW0 "Flow 0"

									#define MSG_FLOW1 "Flow 1"

									#define MSG_FLOW2 "Flow 2"

									#define MSG_CONTROL "Control"

									#define MSG_MIN " \002 Min"

									#define MSG_MAX " \002 Max"

									#define MSG_FACTOR " \002 Fact"

									#define MSG_AUTOTEMP "Autotemp"

									#define MSG_ON "On "

									#define MSG_OFF "Off"

									#define MSG_PID_P "PID-P"

									#define MSG_PID_I "PID-I"

									#define MSG_PID_D "PID-D"

									#define MSG_PID_C "PID-C"

									#define MSG_ACC  "Accel"

									#define MSG_VXY_JERK "Vxy-jerk"

									#define MSG_VZ_JERK "Vz-jerk"

									#define MSG_VE_JERK "Ve-jerk"

									#define MSG_VMAX "Vmax "

									#define MSG_X "x"

									#define MSG_Y "y"

									#define MSG_Z "z"

									#define MSG_E "e"

									#define MSG_VMIN "Vmin"

									#define MSG_VTRAV_MIN "VTrav min"

									#define MSG_AMAX "Amax "

									#define MSG_A_RETRACT "A-retract"

									#define MSG_XSTEPS "Xsteps/mm"

									#define MSG_YSTEPS "Ysteps/mm"

									#define MSG_ZSTEPS "Zsteps/mm"

									#define MSG_ESTEPS "Esteps/mm"

									#define MSG_RECTRACT "Rectract"

									#define MSG_TEMPERATURE "Temperature"

									#define MSG_MOTION "Motion"

									#define MSG_CONTRAST "LCD contrast"

									#define MSG_STORE_EPROM "Store memory"

									#define MSG_LOAD_EPROM "Load memory"

									#define MSG_RESTORE_FAILSAFE "Restore failsafe"

									#define MSG_REFRESH "Refresh"

									#define MSG_WATCH "Info screen"

									#define MSG_PREPARE "Prepare"

									#define MSG_TUNE "Tune"

									#define MSG_PAUSE_PRINT "Pause print"

									#define MSG_RESUME_PRINT "Resume print"

									#define MSG_STOP_PRINT "Stop print"

									#define MSG_CARD_MENU "Print from SD"

									#define MSG_NO_CARD "No SD card"

									#define MSG_DWELL "Sleep..."

									#define MSG_USERWAIT "Wait for user..."

									#define MSG_RESUMING "Resuming print"

									#define MSG_NO_MOVE "No move."

									#define MSG_KILLED "KILLED. "

									#define MSG_STOPPED "STOPPED. "

									#define MSG_CONTROL_RETRACT  "Retract mm"

									#define MSG_CONTROL_RETRACT_SWAP  "Swap Re.mm"

									#define MSG_CONTROL_RETRACTF "Retract  V"

									#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"

									#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"

									#define MSG_CONTROL_RETRACT_RECOVER_SWAP "S UnRet+mm"

									#define MSG_CONTROL_RETRACT_RECOVERF "UnRet  V"

									#define MSG_AUTORETRACT "AutoRetr."

									#define MSG_FILAMENTCHANGE "Change filament"

									#define MSG_INIT_SDCARD "Init. SD card"

									#define MSG_CNG_SDCARD "Change SD card"

									#define MSG_ZPROBE_OUT "Z probe out. bed"

									#define MSG_POSITION_UNKNOWN "Home X/Y before Z"

									#define MSG_ZPROBE_ZOFFSET "Z Offset"

									#define MSG_BABYSTEP_X "Babystep X"

									#define MSG_BABYSTEP_Y "Babystep Y"

									#define MSG_BABYSTEP_Z "Babystep Z"

									#define MSG_ENDSTOP_ABORT "Endstop abort"


								#endif


								#if LANGUAGE_CHOICE == 2


								// LCD Menu Messages

								// Please note these are limited to 17 characters!


									#define WELCOME_MSG MACHINE_NAME " gotowy."

									#define MSG_SD_INSERTED "Karta wlozona"

									#define MSG_SD_REMOVED "Karta usunieta"

									#define MSG_MAIN "Menu glowne"

									#define MSG_AUTOSTART "Autostart"

									#define MSG_DISABLE_STEPPERS "Wylacz silniki"

									#define MSG_AUTO_HOME "Auto. poz. zerowa"

									#define MSG_SET_ORIGIN "Ustaw punkt zero"

									#define MSG_PREHEAT_PLA "Rozgrzej PLA"

									#define MSG_PREHEAT_PLA0 "Rozgrzej PLA 1"

									#define MSG_PREHEAT_PLA1 "Rozgrzej PLA 2"

									#define MSG_PREHEAT_PLA2 "Rozgrzej PLA 3"

									#define MSG_PREHEAT_PLA012 "Roz. PLA Wszystko"

									#define MSG_PREHEAT_PLA_BEDONLY "Rozgrzej PLA Loze"

									#define MSG_PREHEAT_PLA_SETTINGS "Ustaw. rozg. PLA"

									#define MSG_PREHEAT_ABS "Rozgrzej ABS"

									#define MSG_PREHEAT_ABS0 "Rozgrzej ABS 1"

									#define MSG_PREHEAT_ABS1 "Rozgrzej ABS 2"

									#define MSG_PREHEAT_ABS2 "Rozgrzej ABS 3"

									#define MSG_PREHEAT_ABS012 "Roz. ABS Wszystko"

									#define MSG_PREHEAT_ABS_BEDONLY "Rozgrzej ABS Loze"

									#define MSG_PREHEAT_ABS_SETTINGS "Ustaw. rozg. ABS"

									#define MSG_COOLDOWN "Chlodzenie"

									#define MSG_SWITCH_PS_ON "Wlacz zasilacz"

									#define MSG_SWITCH_PS_OFF "Wylacz zasilacz"

									#define MSG_EXTRUDE "Ekstruzja"

									#define MSG_RETRACT "Cofanie"

									#define MSG_MOVE_AXIS "Ruch osi"

									#define MSG_MOVE_X "Przesun w X"

									#define MSG_MOVE_Y "Przesun w Y"

									#define MSG_MOVE_Z "Przesun w Z"

									#define MSG_MOVE_E "Ekstruzja (os E)"

									#define MSG_MOVE_E1 "Extruder2"

									#define MSG_MOVE_E2 "Extruder3"

									#define MSG_MOVE_01MM "Przesuwaj co .1mm"

									#define MSG_MOVE_1MM "Przesuwaj co 1mm"

									#define MSG_MOVE_10MM "Przesuwaj co 10mm"

									#define MSG_SPEED "Predkosc"

									#define MSG_NOZZLE "Dysza"

									#define MSG_NOZZLE1 "Dysza 2"

									#define MSG_NOZZLE2 "Dysza 3"

									#define MSG_BED "Loze"

									#define MSG_FAN_SPEED "Obroty wiatraka"

									#define MSG_FLOW "Przeplyw"

									#define MSG_FLOW0 "Przeplyw 0"

									#define MSG_FLOW1 "Przeplyw 1"

									#define MSG_FLOW2 "Przeplyw 2"

									#define MSG_CONTROL "Kontrola"

									#define MSG_MIN " \002 Min"

									#define MSG_MAX " \002 Max"

									#define MSG_FACTOR " \002 Mnoznik"

									#define MSG_AUTOTEMP "Auto. temperatura"

									#define MSG_ON "Wl. "

									#define MSG_OFF "Wyl."

									#define MSG_PID_P "PID-P"

									#define MSG_PID_I "PID-I"

									#define MSG_PID_D "PID-D"

									#define MSG_PID_C "PID-C"

									#define MSG_ACC  "Przyspieszenie"

									#define MSG_VXY_JERK "Zryw Vxy"

									#define MSG_VZ_JERK "Zryw Vz"

									#define MSG_VE_JERK "Zryw Ve"

									#define MSG_VMAX "Vmax"

									#define MSG_X "x"

									#define MSG_Y "y"

									#define MSG_Z "z"

									#define MSG_E "e"

									#define MSG_VMIN "Vmin"

									#define MSG_VTRAV_MIN "Vskok min"

									#define MSG_AMAX "Amax"

									#define MSG_A_RETRACT "A-wycofanie"

									#define MSG_XSTEPS "krokiX/mm"

									#define MSG_YSTEPS "krokiY/mm"

									#define MSG_ZSTEPS "krokiZ/mm"

									#define MSG_ESTEPS "krokiE/mm"

									#define MSG_RECTRACT "Wycofanie"

									#define MSG_TEMPERATURE "Temperatura"

									#define MSG_MOTION "Ruch"

									#define MSG_CONTRAST "Kontrast LCD"

									#define MSG_STORE_EPROM "Zapisz w pamieci"

									#define MSG_LOAD_EPROM "Wczytaj z pamieci"

									#define MSG_RESTORE_FAILSAFE "Ustaw. fabryczne"

									#define MSG_REFRESH "\004Odswiez"

									#define MSG_WATCH "Ekran glowny"

									#define MSG_PREPARE "Przygotuj"

									#define MSG_CONTROL "Ustawienia"

									#define MSG_TUNE "Strojenie"

									#define MSG_PAUSE_PRINT "Pauza"

									#define MSG_RESUME_PRINT "Wznowienie"

									#define MSG_STOP_PRINT "Stop"

									#define MSG_CARD_MENU "Menu karty SD"

									#define MSG_NO_CARD "Brak karty"

									#define MSG_DWELL "Uspij..."

									#define MSG_USERWAIT "Oczekiwanie..."

									#define MSG_RESUMING "Wznawianie druku"

									#define MSG_NO_MOVE "Brak ruchu"

									#define MSG_KILLED "Ubity. "

									#define MSG_STOPPED "Zatrzymany. "

									#define MSG_STEPPER_RELEASED "Zwolniony."

									#define MSG_CONTROL_RETRACT  "Wycofaj mm"

									#define MSG_CONTROL_RETRACT_SWAP  "Z Wycof. mm"

									#define MSG_CONTROL_RETRACTF "Wycofaj  V"

									#define MSG_CONTROL_RETRACT_ZLIFT "Skok Z mm:"

									#define MSG_CONTROL_RETRACT_RECOVER "Cof. wycof. +mm"

									#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Z Cof. wyc. +mm"

									#define MSG_CONTROL_RETRACT_RECOVERF "Cof. wycof.  V"

									#define MSG_AUTORETRACT "Auto. wycofanie"

									#define MSG_FILAMENTCHANGE "Zmien filament"

									#define MSG_INIT_SDCARD "Inicjal. karty SD"

									#define MSG_CNG_SDCARD "Zmiana karty SD"

									#define MSG_ZPROBE_OUT "Sonda Z za lozem"

									#define MSG_POSITION_UNKNOWN "Wroc w XY przed Z"

									#define MSG_ZPROBE_ZOFFSET "Offset Z"

									#define MSG_BABYSTEP_X "Babystep X"

									#define MSG_BABYSTEP_Y "Babystep Y"

									#define MSG_BABYSTEP_Z "Babystep Z"

									#define MSG_ENDSTOP_ABORT "Blad wyl. kranc."

									#define MSG_CONTRAST "Kontrast"


								#endif


								#if LANGUAGE_CHOICE == 3


								// LCD Menu Messages

								// Please note these are limited to 17 characters!


									#define WELCOME_MSG MACHINE_NAME " prete."

									#define MSG_SD_INSERTED "Carte inseree"

									#define MSG_SD_REMOVED "Carte retiree"

									#define MSG_MAIN "Menu principal"

									#define MSG_AUTOSTART "Demarrage auto"

									#define MSG_DISABLE_STEPPERS "Arreter moteurs"

									#define MSG_AUTO_HOME "Home auto."

									#define MSG_SET_ORIGIN "Regler origine"

									#define MSG_PREHEAT_PLA " Prechauffage PLA"

									#define MSG_PREHEAT_PLA0 "Prechauff. PLA 1"

								        #define MSG_PREHEAT_PLA1 "Prechauff. PLA 2"

									#define MSG_PREHEAT_PLA2 "Prechauff. PLA 3"

									#define MSG_PREHEAT_PLA012 "Prech. PLA Tout"

									#define MSG_PREHEAT_PLA_BEDONLY "Prech. PLA Plateau"

									#define MSG_PREHEAT_PLA_SETTINGS "Regl. prech. PLA"

									#define MSG_PREHEAT_ABS "Prechauffage ABS"

									#define MSG_PREHEAT_ABS0 "Prechauff. ABS 1"

									#define MSG_PREHEAT_ABS1 "Prechauff. ABS 2"

									#define MSG_PREHEAT_ABS2 "Prechauff. ABS 3"

									#define MSG_PREHEAT_ABS012 "Prech. ABS Tout"

									#define MSG_PREHEAT_ABS_BEDONLY "Prech. ABS Plateau"

									#define MSG_PREHEAT_ABS_SETTINGS "Regl. prech. ABS"

									#define MSG_COOLDOWN "Refroidir"

									#define MSG_SWITCH_PS_ON "Allumer alim."

									#define MSG_SWITCH_PS_OFF "Eteindre alim."

									#define MSG_EXTRUDE "Extrusion"

									#define MSG_RETRACT "Retraction"

									#define MSG_PREHEAT_PLA "Prechauffage PLA"

									#define MSG_PREHEAT_ABS "Prechauffage ABS"

									#define MSG_MOVE_AXIS "Deplacer un axe"

									#define MSG_MOVE_X "Move X"

									#define MSG_MOVE_Y "Move Y"

									#define MSG_MOVE_Z "Move Z"

									#define MSG_MOVE_E "Extruder"

									#define MSG_MOVE_E1 "Extruder2"

									#define MSG_MOVE_E2 "Extruder3"

									#define MSG_MOVE_01MM "Move 0.1mm"

									#define MSG_MOVE_1MM "Move 1mm"

									#define MSG_MOVE_10MM "Move 10mm"

									#define MSG_SPEED " Vitesse"

									#define MSG_NOZZLE "Buse"

									#define MSG_NOZZLE1 "Buse2"

									#define MSG_NOZZLE2 "Buse3"

									#define MSG_BED "Plateau"

									#define MSG_FAN_SPEED "Vite. ventilateur"

									#define MSG_FLOW "Flux"

									#define MSG_FLOW0 "Flux 0"

									#define MSG_FLOW1 "Flux 1"

									#define MSG_FLOW2 "Flux 2"

									#define MSG_CONTROL "Controler"

									#define MSG_MIN " \002 Min"

									#define MSG_MAX " \002 Max"

									#define MSG_FACTOR " \002 Facteur"

									#define MSG_AUTOTEMP "Temp. Auto."

									#define MSG_ON "Marche "

									#define MSG_OFF "Arret"

									#define MSG_PID_P "PID-P"

									#define MSG_PID_I "PID-I"

									#define MSG_PID_D "PID-D"

									#define MSG_PID_C "PID-C"

									#define MSG_ACC "Accel"

									#define MSG_VXY_JERK "Vxy-jerk"

									#define MSG_VZ_JERK "Vz-jerk"

									#define MSG_VE_JERK "Ve-jerk"

									#define MSG_VMAX "Vmax"

									#define MSG_X "x"

									#define MSG_Y "y"

									#define MSG_Z "z"

									#define MSG_E "e"

									#define MSG_VMIN "Vmin"

									#define MSG_VTRAV_MIN "Vdepl min"

									#define MSG_AMAX "Amax "

									#define MSG_A_RETRACT "A-retract"

									#define MSG_XSTEPS "Xpas/mm"

									#define MSG_YSTEPS "Ypas/mm"

									#define MSG_ZSTEPS "Zpas/mm"

									#define MSG_ESTEPS "Epas/mm"

									#define MSG_TEMPERATURE "Temperature"

									#define MSG_MOTION "Mouvement"

									#define MSG_CONTRAST "Contraste LCD"

									#define MSG_STORE_EPROM "Sauver config"

									#define MSG_LOAD_EPROM "Lire config"

									#define MSG_RESTORE_FAILSAFE "Restaurer defauts"

									#define MSG_REFRESH "Actualiser"

									#define MSG_WATCH "Surveiller"

									#define MSG_PREPARE "Preparer"

									#define MSG_TUNE "Regler"

									#define MSG_PAUSE_PRINT "Interrompre impr."

									#define MSG_RESUME_PRINT "Reprendre impr."

									#define MSG_STOP_PRINT "Arreter impr."

									#define MSG_CARD_MENU "Impr. depuis SD"

									#define MSG_NO_CARD "Pas de carte"

									#define MSG_DWELL "Repos..."

									#define MSG_USERWAIT "Atten. de l'util."

									#define MSG_RESUMING "Repri. de l'impr."

									#define MSG_NO_MOVE "Aucun mouvement."

									#define MSG_KILLED "MORT."

									#define MSG_STOPPED "STOPPE."

									#define MSG_STEPPER_RELEASED "RELACHE."

									#define MSG_CONTROL_RETRACT "Retraction mm"

									#define MSG_CONTROL_RETRACT_SWAP "Ech. Retr. mm"

									#define MSG_CONTROL_RETRACTF "Retraction V"

									#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"

									#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"

									#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Ech. UnRet +mm"

									#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"

									#define MSG_AUTORETRACT "Retract. Auto."

									#define MSG_FILAMENTCHANGE "Changer filament"

									#define MSG_INIT_SDCARD "Init. la carte SD"

									#define MSG_CNG_SDCARD "Changer de carte"

									#define MSG_ZPROBE_OUT "Z sonde exte. lit"

									#define MSG_POSITION_UNKNOWN "Rev. dans XY av.Z"

									#define MSG_ZPROBE_ZOFFSET "Offset Z"

									#define MSG_BABYSTEP_X "Babystep X"

									#define MSG_BABYSTEP_Y "Babystep Y"

									#define MSG_BABYSTEP_Z "Babystep Z"

									#define MSG_ENDSTOP_ABORT "Butee abandon"

									#define MSG_CONTRAST "Contrast"


								#endif


								#if LANGUAGE_CHOICE == 4


								// LCD Menu Messages

								// Please note these are limited to 17 characters!


									#define WELCOME_MSG MACHINE_NAME " Bereit."


									#define MSG_SD_INSERTED      "SDKarte erkannt"

									#define MSG_SD_REMOVED       "SDKarte entfernt"

									#define MSG_MAIN             "Hauptmenü"

									#define MSG_AUTOSTART        "Autostart"

									#define MSG_DISABLE_STEPPERS "Stepper abschalt."

									#define MSG_AUTO_HOME        "Auto Nullpunkt"

									#define MSG_SET_ORIGIN       "Setze Nullpunkt"

									#define MSG_PREHEAT_PLA      "Vorwärmen PLA"

									#define MSG_PREHEAT_PLA0     "Vorwärmen PLA 1"

									#define MSG_PREHEAT_PLA1     "Vorwärmen PLA 2"

									#define MSG_PREHEAT_PLA2     "Vorwärmen PLA 3"

									#define MSG_PREHEAT_PLA012   "Vorw. PLA Alle"

									#define MSG_PREHEAT_PLA_BEDONLY "Vorw. PLA Bett"

									#define MSG_PREHEAT_PLA_SETTINGS "Vorwärm. PLA Ein."

									#define MSG_PREHEAT_ABS      "Vorwärmen ABS"

									#define MSG_PREHEAT_ABS0     "Vorwärmen ABS 1"

									#define MSG_PREHEAT_ABS1     "Vorwärmen ABS 2"

									#define MSG_PREHEAT_ABS2     "Vorwärmen ABS 3"

									#define MSG_PREHEAT_ABS012   "Vorw. ABS Alle"

									#define MSG_PREHEAT_ABS_BEDONLY "Vorw. ABS Bett"

									#define MSG_PREHEAT_ABS_SETTINGS "Vorwärm. ABS Ein."

									#define MSG_COOLDOWN         "Abkühlen"

									#define MSG_SWITCH_PS_ON     "Switch Power On"

									#define MSG_SWITCH_PS_OFF    "Switch Power Off"

									#define MSG_EXTRUDE          "Extrude"

									#define MSG_RETRACT          "Retract"

									#define MSG_MOVE_AXIS        "Achsen bewegen"

									#define MSG_MOVE_X           "X bewegen"

									#define MSG_MOVE_Y           "Y bewegen"

									#define MSG_MOVE_Z           "Z bewegen"

									#define MSG_MOVE_E           "Extruder"

									#define MSG_MOVE_E1 		 "Extruder2"

									#define MSG_MOVE_E2 		 "Extruder3"

									#define MSG_MOVE_01MM        "0.1mm bewegen"

									#define MSG_MOVE_1MM         "1mm bewegen"

									#define MSG_MOVE_10MM        "10mm bewegen"

									#define MSG_SPEED            "Geschw"

									#define MSG_NOZZLE           "Düse"

									#define MSG_NOZZLE1          "Düse2"

									#define MSG_NOZZLE2          "Düse3"

									#define MSG_BED              "Bett"

									#define MSG_FAN_SPEED        "Lüftergeschw."

									#define MSG_FLOW             "Fluss"

									#define MSG_FLOW0            "Fluss 0"

									#define MSG_FLOW1            "Fluss 1"

									#define MSG_FLOW2            "Fluss 2"

									#define MSG_CONTROL          "Einstellungen"

									#define MSG_MIN              "\002 Min"

									#define MSG_MAX              "\002 Max"

									#define MSG_FACTOR           "\002 Faktor"

									#define MSG_AUTOTEMP         "AutoTemp"

									#define MSG_ON               "Ein"

									#define MSG_OFF              "Aus"

									#define MSG_PID_P            "PID-P"

									#define MSG_PID_I            "PID-I"

									#define MSG_PID_D            "PID-D"

									#define MSG_PID_C            "PID-C"

									#define MSG_ACC              "Acc"

									#define MSG_VXY_JERK         "Vxy-jerk"

									#define MSG_VZ_JERK          "Vz-jerk"

									#define MSG_VE_JERK          "Ve-jerk"

									#define MSG_VMAX             "Vmax "

									#define MSG_X                "x"

									#define MSG_Y                "y"

									#define MSG_Z                "z"

									#define MSG_E                "e"

									#define MSG_VMIN             "Vmin"

									#define MSG_VTRAV_MIN        "VTrav min"

									#define MSG_AMAX             "Amax "

									#define MSG_A_RETRACT        "A-Retract"

									#define MSG_XSTEPS           "Xsteps/mm"

									#define MSG_YSTEPS           "Ysteps/mm"

									#define MSG_ZSTEPS           "Zsteps/mm"

									#define MSG_ESTEPS           "Esteps/mm"

									#define MSG_RECTRACT_WIDE    "Rectract"

									#define MSG_WATCH            "Beobachten"

									#define MSG_TEMPERATURE      "Temperatur"

									#define MSG_MOTION           "Bewegung"

									#define MSG_CONTRAST "LCD contrast"

									#define MSG_STORE_EPROM      "EPROM speichern"

									#define MSG_LOAD_EPROM       "EPROM laden"

									#define MSG_RESTORE_FAILSAFE "Standardkonfig."

									#define MSG_REFRESH          "Aktualisieren"

									#define MSG_PREPARE          "Vorbereitung"

									#define MSG_CONTROL          "Einstellungen"

									#define MSG_TUNE             "Justierung"

									#define MSG_PAUSE_PRINT      "Druck anhalten"

									#define MSG_RESUME_PRINT     "Druck fortsetz"

									#define MSG_STOP_PRINT       "Druck stoppen"

									#define MSG_CARD_MENU        "SDKarten Menü"

									#define MSG_NO_CARD          "Keine SDKarte"

									#define MSG_DWELL            "Warten..."

									#define MSG_USERWAIT         "Warte auf Nutzer"

									#define MSG_RESUMING         "Druck fortsetzung"

									#define MSG_NO_MOVE          "Kein Zug."

									#define MSG_KILLED           "KILLED"

									#define MSG_STOPPED          "GESTOPPT"

									#define MSG_STEPPER_RELEASED "Stepper frei"

									#define MSG_CONTROL_RETRACT  "Retract mm"

									#define MSG_CONTROL_RETRACT_SWAP  "Wechs. Retract mm"

									#define MSG_CONTROL_RETRACTF "Retract  V"

									#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"

									#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"

									#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Wechs. UnRet +mm"

									#define MSG_CONTROL_RETRACT_RECOVERF "UnRet  V"

									#define MSG_AUTORETRACT      "AutoRetr."

									#define MSG_FILAMENTCHANGE "Filament wechseln"

									#define MSG_INIT_SDCARD "Init. SD-Card"

									#define MSG_CNG_SDCARD "Change SD-Card"

									#define MSG_ZPROBE_OUT "Z probe out. bed"

									#define MSG_POSITION_UNKNOWN "Home X/Y before Z"

									#define MSG_ZPROBE_ZOFFSET "Z Offset"

									#define MSG_BABYSTEP_X "Babystep X"

									#define MSG_BABYSTEP_Y "Babystep Y"

									#define MSG_BABYSTEP_Z "Babystep Z"

									#define MSG_ENDSTOP_ABORT "Endstop abort"

									#define MSG_CONTRAST "Contrast"


								#endif


								#if LANGUAGE_CHOICE == 5


								// LCD Menu Messages

								// Please note these are limited to 17 characters!


									#define WELCOME_MSG MACHINE_NAME " lista."

									#define MSG_SD_INSERTED "Tarjeta colocada"

									#define MSG_SD_REMOVED "Tarjeta retirada"

									#define MSG_MAIN "Menu principal"

									#define MSG_AUTOSTART " Autostart"

									#define MSG_DISABLE_STEPPERS "Apagar motores"

									#define MSG_AUTO_HOME "Llevar al origen"

									#define MSG_SET_ORIGIN "Establecer cero"

									#define MSG_PREHEAT_PLA "Precalentar PLA"

									#define MSG_PREHEAT_PLA0 "Precalentar PLA 1"

									#define MSG_PREHEAT_PLA1 "Precalentar PLA 2"

									#define MSG_PREHEAT_PLA2 "Precalentar PLA 3"

									#define MSG_PREHEAT_PLA012 "Precal. PLA Todo"

									#define MSG_PREHEAT_PLA_BEDONLY "Precal. PLA Base"

									#define MSG_PREHEAT_PLA_SETTINGS "Ajustar temp. PLA"

									#define MSG_PREHEAT_ABS "Precalentar ABS"

									#define MSG_PREHEAT_ABS0 "Precalentar ABS 1"

									#define MSG_PREHEAT_ABS1 "Precalentar ABS 2"

									#define MSG_PREHEAT_ABS2 "Precalentar ABS 3"

									#define MSG_PREHEAT_ABS012 "Precal. ABS Todo"

									#define MSG_PREHEAT_ABS_BEDONLY "Precal. ABS Base"

									#define MSG_PREHEAT_ABS_SETTINGS "Ajustar temp. ABS"

									#define MSG_COOLDOWN "Enfriar"

									#define MSG_SWITCH_PS_ON "Switch Power On"

									#define MSG_SWITCH_PS_OFF "Switch Power Off"

									#define MSG_EXTRUDE "Extruir"

									#define MSG_RETRACT "Retraer"

									#define MSG_MOVE_AXIS "Mover ejes"

									#define MSG_MOVE_X "Mover X"

									#define MSG_MOVE_Y "Mover Y"

									#define MSG_MOVE_Z "Mover Z"

									#define MSG_MOVE_E "Extrusor"

									#define MSG_MOVE_E1 "Extrusor2"

									#define MSG_MOVE_E2 "Extrusor3"

									#define MSG_MOVE_01MM "Mover 0.1mm"

									#define MSG_MOVE_1MM "Mover 1mm"

									#define MSG_MOVE_10MM "Mover 10mm"

									#define MSG_SPEED "Velocidad"

									#define MSG_NOZZLE "Nozzle"

									#define MSG_NOZZLE1 "Nozzle2"

									#define MSG_NOZZLE2 "Nozzle3"

									#define MSG_BED "Base"

									#define MSG_FAN_SPEED "Ventilador"

									#define MSG_FLOW "Flujo"

									#define MSG_FLOW0 "Flujo 0"

									#define MSG_FLOW1 "Flujo 1"

									#define MSG_FLOW2 "Flujo 2"

									#define MSG_CONTROL "Control"

									#define MSG_MIN "\002 Min"

									#define MSG_MAX "\002 Max"

									#define MSG_FACTOR "\002 Fact"

									#define MSG_AUTOTEMP "Autotemp"

									#define MSG_ON "On"

									#define MSG_OFF "Off"

									#define MSG_PID_P "PID-P"

									#define MSG_PID_I "PID-I"

									#define MSG_PID_D "PID-D"

									#define MSG_PID_C "PID-C"

									#define MSG_ACC  "Acel"

									#define MSG_VXY_JERK "Vxy-jerk"

									#define MSG_VZ_JERK "Vz-jerk"

									#define MSG_VE_JERK "Ve-jerk"

									#define MSG_VMAX "Vmax"

									#define MSG_X "x"

									#define MSG_Y "y"

									#define MSG_Z "z"

									#define MSG_E "e"

									#define MSG_VMIN "Vmin"

									#define MSG_VTRAV_MIN "VTrav min"

									#define MSG_AMAX "Amax"

									#define MSG_A_RETRACT "A-retrac."

									#define MSG_XSTEPS "X pasos/mm"

									#define MSG_YSTEPS "Y pasos/mm"

									#define MSG_ZSTEPS "Z pasos/mm"

									#define MSG_ESTEPS "E pasos/mm"

									#define MSG_RECTRACT "Retraer"

									#define MSG_TEMPERATURE "Temperatura"

									#define MSG_MOTION "Movimiento"

									#define MSG_STORE_EPROM "Guardar memoria"

									#define MSG_LOAD_EPROM "Cargar memoria"

									#define MSG_RESTORE_FAILSAFE "Rest. de emergen."

									#define MSG_REFRESH "Volver a cargar"

									#define MSG_WATCH "Monitorizar"

									#define MSG_PREPARE "Preparar"

									#define MSG_TUNE "Ajustar"

									#define MSG_PAUSE_PRINT "Pausar impresion"

									#define MSG_RESUME_PRINT "Reanudar impres."

									#define MSG_STOP_PRINT "Detener impresion"

									#define MSG_CARD_MENU "Menu de SD"

									#define MSG_NO_CARD "No hay tarjeta SD"

									#define MSG_DWELL "Reposo..."

									#define MSG_USERWAIT "Esperando ordenes"

									#define MSG_RESUMING "Resumiendo impre."

									#define MSG_NO_MOVE "Sin movimiento"

									#define MSG_KILLED "PARADA DE EMERG."

									#define MSG_STOPPED "PARADA"

									#define MSG_CONTROL_RETRACT  "Retraer mm"

									#define MSG_CONTROL_RETRACT_SWAP  "Interc. Retraer mm"

									#define MSG_CONTROL_RETRACTF "Retraer  V"

									#define MSG_CONTROL_RETRACT_ZLIFT "Levantar mm"

									#define MSG_CONTROL_RETRACT_RECOVER "DesRet +mm"

									#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Interc. DesRet +mm"

									#define MSG_CONTROL_RETRACT_RECOVERF "DesRet V"

									#define MSG_AUTORETRACT "AutoRetr."

									#define MSG_FILAMENTCHANGE "Cambiar filamento"

									#define MSG_INIT_SDCARD "Iniciando tarjeta"

									#define MSG_CNG_SDCARD "Cambiar tarjeta"

									#define MSG_RECTRACT_WIDE "Retraer"

									#define MSG_TEMPERATURE_WIDE "Temperatura"

									#define MSG_TEMPERATURE_RTN  "Temperatura"

									#define MSG_MAIN_WIDE "Menu principal"

									#define MSG_MOTION_WIDE "Movimiento"

									#define MSG_PREPARE_ALT "Preparar"

									#define MSG_CONTROL_ARROW "Control"

									#define MSG_RETRACT_ARROW "Retraer"

									#define MSG_STEPPER_RELEASED "Desacoplada."

									#define MSG_ZPROBE_OUT "Z probe out. bed"

									#define MSG_POSITION_UNKNOWN "Home X/Y before Z"

									#define MSG_ZPROBE_ZOFFSET "Z Offset"

									#define MSG_BABYSTEP_X "Babystep X"

									#define MSG_BABYSTEP_Y "Babystep Y"

									#define MSG_BABYSTEP_Z "Babystep Z"

									#define MSG_ENDSTOP_ABORT "Endstop abort"

									#define MSG_CONTRAST "Contrast"


								#endif


								#if LANGUAGE_CHOICE == 6


								// LCD Menu Messages

								// Please note these are limited to 17 characters!


									#define WELCOME_MSG MACHINE_NAME			        "Готов."

									#define MSG_SD_INSERTED						"Карта вставлена"

									#define MSG_SD_REMOVED						"Карта извлечена"

									#define MSG_MAIN							"Меню \003"

									#define MSG_AUTOSTART						"Автостарт"

									#define MSG_DISABLE_STEPPERS 				"Выкл. двигатели"

									#define MSG_AUTO_HOME						"Парковка"

									#define MSG_SET_ORIGIN						"Запомнить ноль"

									#define MSG_PREHEAT_PLA 					"Преднагрев PLA"

									#define MSG_PREHEAT_PLA0					"Преднагрев PLA0"

									#define MSG_PREHEAT_PLA1					"Преднагрев PLA1"

									#define MSG_PREHEAT_PLA2					"Преднагрев PLA2"

									#define MSG_PREHEAT_PLA012 					"Преднаг. PLA все"

									#define MSG_PREHEAT_PLA_BEDONLY 			"Пред. PLA Кровать"

									#define MSG_PREHEAT_PLA_SETTINGS  			"Настройки PLA"

									#define MSG_PREHEAT_ABS						"Преднагрев ABS"

									#define MSG_PREHEAT_ABS0					"Преднагрев ABS0"

									#define MSG_PREHEAT_ABS1					"Преднагрев ABS1"

									#define MSG_PREHEAT_ABS2					"Преднагрев ABS2"

									#define MSG_PREHEAT_ABS012 					"Преднаг. ABS все "

									#define MSG_PREHEAT_ABS_BEDONLY 			"Пред. ABS Кровать"

									#define MSG_PREHEAT_ABS_SETTINGS  			"Настройки ABS"

									#define MSG_COOLDOWN						"Охлаждение"

									#define MSG_SWITCH_PS_ON					"Switch Power On"

									#define MSG_SWITCH_PS_OFF					"Switch Power Off"

									#define MSG_EXTRUDE							"Экструзия"

									#define MSG_RETRACT							"Откат"

									#define MSG_MOVE_AXIS  						"Движение по осям"

									#define MSG_MOVE_X                          "Move X"

									#define MSG_MOVE_Y                          "Move Y"

									#define MSG_MOVE_Z                          "Move Z"

									#define MSG_MOVE_E                          "Extruder"

									#define MSG_MOVE_E1 						"Extruder2"

									#define MSG_MOVE_E2 						"Extruder3"

									#define MSG_MOVE_01MM                       "Move 0.1mm"

									#define MSG_MOVE_1MM                        "Move 1mm"

									#define MSG_MOVE_10MM                       "Move 10mm"

									#define MSG_SPEED							"Скорость:"

									#define MSG_NOZZLE							"\002 Фильера:"

									#define MSG_NOZZLE1							"\002 Фильера2:"

									#define MSG_NOZZLE2							"\002 Фильера3:"

									#define MSG_BED								"\002 Кровать:"

									#define MSG_FAN_SPEED						"Куллер:"

									#define MSG_FLOW							"Поток:"

									#define MSG_FLOW0 " Поток0:"

									#define MSG_FLOW1 " Поток1:"

									#define MSG_FLOW2 " Поток2:"

									#define MSG_CONTROL							"Настройки \003"

									#define MSG_MIN								"\002 Минимум:"

									#define MSG_MAX								"\002 Максимум:"

									#define MSG_FACTOR							"\002 Фактор:"

									#define MSG_AUTOTEMP						"Autotemp:"

									#define MSG_ON								"Вкл. "

									#define MSG_OFF								"Выкл. "

									#define MSG_PID_P							"PID-P: "

									#define MSG_PID_I							"PID-I: "

									#define MSG_PID_D							"PID-D: "

									#define MSG_PID_C							"PID-C: "

									#define MSG_ACC								"Acc:"

									#define MSG_VXY_JERK						"Vxy-jerk: "

									#define MSG_VZ_JERK                         "Vz-jerk"

									#define MSG_VE_JERK                         "Ve-jerk"

									#define MSG_VMAX							"Vmax "

									#define MSG_X								"x:"

									#define MSG_Y								"y:"

									#define MSG_Z								"z:"

									#define MSG_E								"e:"

									#define MSG_VMIN							"Vmin:"

									#define MSG_VTRAV_MIN						"VTrav min:"

									#define MSG_AMAX							"Amax "

									#define MSG_A_RETRACT						"A-retract:"

									#define MSG_XSTEPS							"X шаг/mm:"

									#define MSG_YSTEPS							"Y шаг/mm:"

									#define MSG_ZSTEPS							"Z шаг/mm:"

									#define MSG_ESTEPS							"E шаг/mm:"

									#define MSG_RECTRACT    					"Откат подачи    \x7E"

									#define MSG_TEMPERATURE  					"Температура     \x7E"

									#define MSG_MOTION							"Скорости        \x7E"

									#define MSG_CONTRAST  						"LCD contrast"

									#define MSG_STORE_EPROM  					"Сохранить в EPROM"

									#define MSG_LOAD_EPROM  					"Загруз. из EPROM"

									#define MSG_RESTORE_FAILSAFE				"Сброс настроек"

									#define MSG_REFRESH							"\004Обновить"

									#define MSG_WATCH							"Обзор           \003"

									#define MSG_PREPARE							"Действия        \x7E"

									#define MSG_TUNE							"Настройки       \x7E"

									#define MSG_PAUSE_PRINT  					"Продолжить печать"

									#define MSG_RESUME_PRINT					"возобн. печать"

									#define MSG_STOP_PRINT 						"Остановить печать"

									#define MSG_CARD_MENU						"Меню карты      \x7E"

									#define MSG_NO_CARD							"Нет карты"

									#define MSG_DWELL							"Сон..."

									#define MSG_USERWAIT  						"Ожиданиие"

									#define MSG_RESUMING 						"Resuming print"

									#define MSG_NO_MOVE							"Нет движения."

									#define MSG_KILLED							"УБИТО."

									#define MSG_STOPPED							"ОСТАНОВЛЕНО."

									#define MSG_CONTROL_RETRACT					"Откат mm:"

									#define MSG_CONTROL_RETRACT_SWAP				"своп Откат mm:"

									#define MSG_CONTROL_RETRACTF				"Откат  V:"

									#define MSG_CONTROL_RETRACT_ZLIFT			"Прыжок mm:"

									#define MSG_CONTROL_RETRACT_RECOVER			"Возврат +mm:"

									#define MSG_CONTROL_RETRACT_RECOVER_SWAP		"своп Возврат +mm:"

									#define MSG_CONTROL_RETRACT_RECOVERF		"Возврат  V:"

									#define MSG_AUTORETRACT						"АвтоОткат:"

									#define MSG_FILAMENTCHANGE 					"Change filament"

									#define MSG_INIT_SDCARD 					"Init. SD-Card"

									#define MSG_CNG_SDCARD 						"Change SD-Card"

									#define MSG_ZPROBE_OUT 						"Z probe out. bed"

									#define MSG_POSITION_UNKNOWN 				"Home X/Y before Z"

									#define MSG_ZPROBE_ZOFFSET 					"Z Offset"

									#define MSG_BABYSTEP_X 						"Babystep X"

									#define MSG_BABYSTEP_Y 						"Babystep Y"

									#define MSG_BABYSTEP_Z 						"Babystep Z"

									#define MSG_ENDSTOP_ABORT 					"Endstop abort"

									#define MSG_CONTRAST 						"Contrast"


								#endif


								#if LANGUAGE_CHOICE == 7


								// LCD Menu Messages

								// Please note these are limited to 17 characters!


									#define WELCOME_MSG MACHINE_NAME " pronto."

									#define MSG_SD_INSERTED          "SD Card inserita"

									#define MSG_SD_REMOVED           "SD Card rimossa"

									#define MSG_MAIN                 "Menu principale"

									#define MSG_AUTOSTART            "Autostart"

									#define MSG_DISABLE_STEPPERS     "Disabilita Motori"

									#define MSG_AUTO_HOME            "Auto Home"

									#define MSG_SET_ORIGIN           "Imposta Origine"

									#define MSG_PREHEAT_PLA          "Preriscalda PLA"

									#define MSG_PREHEAT_PLA0         "Preriscalda PLA 1"

									#define MSG_PREHEAT_PLA1         "Preriscalda PLA 2"

									#define MSG_PREHEAT_PLA2         "Preriscalda PLA 3"

									#define MSG_PREHEAT_PLA012       "Preris. PLA Tutto"

									#define MSG_PREHEAT_PLA_BEDONLY  "Preri. PLA Piatto"

									#define MSG_PREHEAT_PLA_SETTINGS "Preris. PLA Conf"

									#define MSG_PREHEAT_ABS          "Preriscalda ABS"

									#define MSG_PREHEAT_ABS0         "Preriscalda ABS 1"

									#define MSG_PREHEAT_ABS1         "Preriscalda ABS 2"

									#define MSG_PREHEAT_ABS2         "Preriscalda ABS 3"

									#define MSG_PREHEAT_ABS012       "Preris. ABS Tutto"

									#define MSG_PREHEAT_ABS_BEDONLY  "Preri. ABS Piatto"

									#define MSG_PREHEAT_ABS_SETTINGS "Preris. ABS Conf"

									#define MSG_COOLDOWN             "Raffredda"

									#define MSG_SWITCH_PS_ON         "Switch Power On"

									#define MSG_SWITCH_PS_OFF        "Switch Power Off"

									#define MSG_EXTRUDE              "Estrudi"

									#define MSG_RETRACT              "Ritrai"

									#define MSG_MOVE_AXIS            "Muovi Asse"

									#define MSG_MOVE_X               "Move X"

									#define MSG_MOVE_Y               "Move Y"

									#define MSG_MOVE_Z               "Move Z"

									#define MSG_MOVE_E               "Extruder"

									#define MSG_MOVE_E1 			 "Extruder2"

									#define MSG_MOVE_E2 			 "Extruder3"

									#define MSG_MOVE_01MM            "Move 0.1mm"

									#define MSG_MOVE_1MM             "Move 1mm"

									#define MSG_MOVE_10MM            "Move 10mm"

									#define MSG_SPEED                "Velcità"

									#define MSG_NOZZLE               "Ugello"

									#define MSG_NOZZLE1              "Ugello2"

									#define MSG_NOZZLE2              "Ugello3"

									#define MSG_BED                  "Piatto"

									#define MSG_FAN_SPEED            "Ventola"

									#define MSG_FLOW                 "Flusso"

									#define MSG_FLOW0                "Flusso 0"

									#define MSG_FLOW1                "Flusso 1"

									#define MSG_FLOW2                "Flusso 2"

									#define MSG_CONTROL              "Controllo"

									#define MSG_MIN                  " \002 Min:"

									#define MSG_MAX                  " \002 Max:"

									#define MSG_FACTOR               " \002 Fact:"

									#define MSG_AUTOTEMP             "Autotemp"

									#define MSG_ON                   "On "

									#define MSG_OFF                  "Off"

									#define MSG_PID_P                "PID-P"

									#define MSG_PID_I                "PID-I"

									#define MSG_PID_D                "PID-D"

									#define MSG_PID_C                "PID-C"

									#define MSG_ACC                  "Accel"

									#define MSG_VXY_JERK             "Vxy-jerk"

									#define MSG_VZ_JERK              "Vz-jerk"

									#define MSG_VE_JERK              "Ve-jerk"

									#define MSG_VMAX                 "Vmax"

									#define MSG_X                    "x"

									#define MSG_Y                    "y"

									#define MSG_Z                    "z"

									#define MSG_E                    "e"

									#define MSG_VMIN                 "Vmin"

									#define MSG_VTRAV_MIN            "VTrav min"

									#define MSG_AMAX                 "Amax"

									#define MSG_A_RETRACT            "A-retract"

									#define MSG_XSTEPS               "Xpassi/mm"

									#define MSG_YSTEPS               "Ypassi/mm"

									#define MSG_ZSTEPS               "Zpassi/mm"

									#define MSG_ESTEPS               "Epassi/mm"

									#define MSG_RECTRACT             "Ritrai"

									#define MSG_TEMPERATURE          "Temperatura"

									#define MSG_MOTION               "Movimento"

									#define MSG_CONTRAST "LCD contrast"

									#define MSG_STORE_EPROM          "Salva in EEPROM"

									#define MSG_LOAD_EPROM           "Carica da EEPROM"

									#define MSG_RESTORE_FAILSAFE     "Impostaz. default"

									#define MSG_REFRESH              "Aggiorna"

									#define MSG_WATCH                "Guarda"

									#define MSG_PREPARE              "Prepara"

									#define MSG_TUNE                 "Adatta"

									#define MSG_PAUSE_PRINT          "Pausa"

									#define MSG_RESUME_PRINT         "Riprendi Stampa"

									#define MSG_STOP_PRINT           "Arresta Stampa"

									#define MSG_CARD_MENU            "SD Card Menu"

									#define MSG_NO_CARD              "No SD Card"

									#define MSG_DWELL                "Sospensione..."

									#define MSG_USERWAIT             "Attendi Utente..."

									#define MSG_RESUMING             "Riprendi Stampa"

									#define MSG_NO_MOVE              "Nessun Movimento."

									#define MSG_KILLED               "UCCISO. "

									#define MSG_STOPPED              "ARRESTATO. "

									#define MSG_CONTROL_RETRACT      "Ritrai mm"

									#define MSG_CONTROL_RETRACT_SWAP "Scamb. Ritrai mm"

									#define MSG_CONTROL_RETRACTF     "Ritrai  V"

									#define MSG_CONTROL_RETRACT_ZLIFT "Salta mm"

									#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"

									#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Scamb. UnRet +mm"

									#define MSG_CONTROL_RETRACT_RECOVERF "UnRet  V"

									#define MSG_AUTORETRACT          "AutoArretramento"

									#define MSG_FILAMENTCHANGE       "Cambia filamento"

									#define MSG_INIT_SDCARD          "Iniz. SD-Card"

									#define MSG_CNG_SDCARD           "Cambia SD-Card"

									#define MSG_ZPROBE_OUT "Z probe out. bed"

									#define MSG_POSITION_UNKNOWN "Home X/Y before Z"

									#define MSG_ZPROBE_ZOFFSET "Z Offset"

									#define MSG_BABYSTEP_X "Babystep X"

									#define MSG_BABYSTEP_Y "Babystep Y"

									#define MSG_BABYSTEP_Z "Babystep Z"

									#define MSG_ENDSTOP_ABORT "Endstop abort"

									#define MSG_CONTRAST "Contrast"


								#endif


								#if LANGUAGE_CHOICE == 8


								// LCD Menu Messages

								// Please note these are limited to 17 characters!


									#define WELCOME_MSG MACHINE_NAME " pronto."

									#define MSG_SD_INSERTED "Cartao inserido"

									#define MSG_SD_REMOVED "Cartao removido"

									#define MSG_MAIN " Menu principal \003"

									#define MSG_AUTOSTART "Autostart"

									#define MSG_DISABLE_STEPPERS " Apagar motores"

									#define MSG_AUTO_HOME "Ir para origen"

									#define MSG_SET_ORIGIN "Estabelecer orig."

									#define MSG_PREHEAT_PLA "Pre-aquecer PLA"

									#define MSG_PREHEAT_PLA0 " pre-aquecer PLA 1"

									#define MSG_PREHEAT_PLA1 " pre-aquecer PLA 2"

									#define MSG_PREHEAT_PLA2 " pre-aquecer PLA 3"

									#define MSG_PREHEAT_PLA012 " pre-aq. PLA Tudo"

									#define MSG_PREHEAT_PLA_BEDONLY  " pre-aq. PLA \002Base"

									#define MSG_PREHEAT_PLA_SETTINGS "PLA setting"

									#define MSG_PREHEAT_ABS "Pre-aquecer ABS"

									#define MSG_PREHEAT_ABS0 " pre-aquecer ABS 1"

									#define MSG_PREHEAT_ABS1 " pre-aquecer ABS 2"

									#define MSG_PREHEAT_ABS2 " pre-aquecer ABS 3"

									#define MSG_PREHEAT_ABS012 " pre-aq. ABS Tudo"

									#define MSG_PREHEAT_ABS_BEDONLY  " pre-aq. ABS \002Base"

									#define MSG_PREHEAT_ABS_SETTINGS "ABS setting"

									#define MSG_COOLDOWN "Esfriar"

									#define MSG_SWITCH_PS_ON "Switch Power On"

									#define MSG_SWITCH_PS_OFF "Switch Power Off"

									#define MSG_EXTRUDE "Extrudar"

									#define MSG_RETRACT "Retrair"

									#define MSG_PREHEAT_PLA "Pre-aquecer PLA"

									#define MSG_PREHEAT_ABS "Pre-aquecer ABS"

									#define MSG_MOVE_AXIS "Mover eixo      \x7E"

									#define MSG_MOVE_X "Move X"

									#define MSG_MOVE_Y "Move Y"

									#define MSG_MOVE_Z "Move Z"

									#define MSG_MOVE_E "Extruder"

									#define MSG_MOVE_E1 "Extruder2"

									#define MSG_MOVE_E2 "Extruder3"

									#define MSG_MOVE_01MM "Move 0.1mm"

									#define MSG_MOVE_1MM "Move 1mm"

									#define MSG_MOVE_10MM "Move 10mm"

									#define MSG_SPEED "Velocidade:"

									#define MSG_NOZZLE "\002Nozzle:"

									#define MSG_NOZZLE1 "\002Nozzle2:"

									#define MSG_NOZZLE2 "\002Nozzle3:"

									#define MSG_BED "\002Base:"

									#define MSG_FAN_SPEED "Velocidade vento."

									#define MSG_FLOW "Fluxo:"

									#define MSG_FLOW0 "Fluxo0:"

									#define MSG_FLOW1 "Fluxo1:"

									#define MSG_FLOW2 "Fluxo2:"

									#define MSG_CONTROL "Controle \003"

									#define MSG_MIN "\002 Min:"

									#define MSG_MAX "\002 Max:"

									#define MSG_FACTOR "\002 Fact:"

									#define MSG_AUTOTEMP "Autotemp:"

									#define MSG_ON "On "

									#define MSG_OFF "Off"

									#define MSG_PID_P "PID-P: "

									#define MSG_PID_I "PID-I: "

									#define MSG_PID_D "PID-D: "

									#define MSG_PID_C "PID-C: "

									#define MSG_ACC  "Acc:"

									#define MSG_VXY_JERK "Vxy-jerk: "

									#define MSG_VZ_JERK "Vz-jerk"

									#define MSG_VE_JERK "Ve-jerk"

									#define MSG_VMAX " Vmax "

									#define MSG_X "x:"

									#define MSG_Y "y:"

									#define MSG_Z "z:"

									#define MSG_E "e:"

									#define MSG_VMIN "Vmin:"

									#define MSG_VTRAV_MIN "VTrav min:"

									#define MSG_AMAX "Amax "

									#define MSG_A_RETRACT "A-retract:"

									#define MSG_XSTEPS "Xpasso/mm:"

									#define MSG_YSTEPS "Ypasso/mm:"

									#define MSG_ZSTEPS "Zpasso/mm:"

									#define MSG_ESTEPS "Epasso/mm:"

									#define MSG_MAIN_WIDE "Menu Principal  \003"

									#define MSG_RECTRACT "Retrair"

									#define MSG_TEMPERATURE "Temperatura"

									#define MSG_MOTION "Movimento"

									#define MSG_STORE_EPROM "Guardar memoria"

									#define MSG_LOAD_EPROM "Carregar memoria"

									#define MSG_RESTORE_FAILSAFE "Rest. de emergen."

									#define MSG_REFRESH "\004Recarregar"

									#define MSG_WATCH "Monitorar   \003"

									#define MSG_PREPARE "Preparar \x7E"

									#define MSG_PREPARE_ALT "Preparar \003"

									#define MSG_CONTROL_ARROW "Controle \x7E"

									#define MSG_RETRACT_ARROW "Retrair \x7E"

									#define MSG_TUNE "Tune    \x7E"

									#define MSG_PAUSE_PRINT "Pausar impressao"

									#define MSG_RESUME_PRINT "Resumir impressao"

									#define MSG_STOP_PRINT "Parar impressao"

									#define MSG_CARD_MENU "Menu cartao SD"

									#define MSG_NO_CARD "Sem cartao SD"

									#define MSG_DWELL "Repouso..."

									#define MSG_USERWAIT "Esperando ordem"

									#define MSG_RESUMING "Resuming print"

									#define MSG_NO_MOVE "Sem movimento"

									#define MSG_KILLED "PARADA DE EMERG."

									#define MSG_STOPPED "PARADA. "

									#define MSG_STEPPER_RELEASED "Lancado."

									#define MSG_CONTROL_RETRACT  " Retrair mm:"

									#define MSG_CONTROL_RETRACT_SWAP  "Troca Retrair mm:"

									#define MSG_CONTROL_RETRACTF " Retrair  V:"

									#define MSG_CONTROL_RETRACT_ZLIFT " Levantar mm:"

									#define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm:"

									#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Troca DesRet +mm:"

									#define MSG_CONTROL_RETRACT_RECOVERF " DesRet  V:"

									#define MSG_AUTORETRACT " AutoRetr.:"

									#define MSG_FILAMENTCHANGE "Change filament"

									#define MSG_INIT_SDCARD "Init. SD-Card"

									#define MSG_CNG_SDCARD "Change SD-Card"

									#define MSG_ZPROBE_OUT "Son. fora da mesa"

									#define MSG_POSITION_UNKNOWN "XY antes de Z"

									#define MSG_ZPROBE_ZOFFSET "Z Offset"

									#define MSG_BABYSTEP_X "Babystep X"

									#define MSG_BABYSTEP_Y "Babystep Y"

									#define MSG_BABYSTEP_Z "Babystep Z"

									#define MSG_ENDSTOP_ABORT "Endstop abort"

									#define MSG_CONTRAST "Contrast"


								#endif


								#if LANGUAGE_CHOICE == 9


								// LCD Menu Messages

								// Please note these are limited to 17 characters!


									#define WELCOME_MSG MACHINE_NAME " valmis."

									#define MSG_SD_INSERTED "Kortti asetettu"

									#define MSG_SD_REMOVED "Kortti poistettu"

									#define MSG_MAIN "Palaa"

									#define MSG_AUTOSTART "Automaatti"

									#define MSG_DISABLE_STEPPERS "Vapauta moottorit"

									#define MSG_AUTO_HOME "Aja referenssiin"

									#define MSG_SET_ORIGIN "Aseta origo"

									#define MSG_PREHEAT_PLA "Esilammita PLA"

									#define MSG_PREHEAT_PLA0 "Esilammita PLA 1"

									#define MSG_PREHEAT_PLA1 "Esilammita PLA 2"

									#define MSG_PREHEAT_PLA2 "Esilammita PLA 3"

									#define MSG_PREHEAT_PLA012 "Esila. PLA Kaikki"

									#define MSG_PREHEAT_PLA_BEDONLY  "Esila. PLA Alusta"

									#define MSG_PREHEAT_PLA_SETTINGS "Esilamm. PLA konf"

									#define MSG_PREHEAT_ABS "Esilammita ABS"

									#define MSG_PREHEAT_ABS0 "Esilammita ABS 1"

									#define MSG_PREHEAT_ABS1 "Esilammita ABS 2"

									#define MSG_PREHEAT_ABS2 "Esilammita ABS 3"

									#define MSG_PREHEAT_ABS012 "Esila. ABS Kaikki"

									#define MSG_PREHEAT_ABS_BEDONLY  "Esila. ABS Alusta"

									#define MSG_PREHEAT_ABS_SETTINGS "Esilamm. ABS konf"

									#define MSG_COOLDOWN "Jaahdyta"

									#define MSG_SWITCH_PS_ON "Virta paalle"

									#define MSG_SWITCH_PS_OFF "Virta pois"

									#define MSG_EXTRUDE "Pursota"

									#define MSG_RETRACT "Veda takaisin"

									#define MSG_MOVE_AXIS "Liikuta akseleita"

									#define MSG_MOVE_X "Move X"

									#define MSG_MOVE_Y "Move Y"

									#define MSG_MOVE_Z "Move Z"

									#define MSG_MOVE_E "Extruder"

									#define MSG_MOVE_E1 "Extruder2"

									#define MSG_MOVE_E2 "Extruder3"

									#define MSG_MOVE_01MM "Move 0.1mm"

									#define MSG_MOVE_1MM "Move 1mm"

									#define MSG_MOVE_10MM "Move 10mm"

									#define MSG_SPEED "Nopeus"

									#define MSG_NOZZLE "Suutin"

									#define MSG_NOZZLE1 "Suutin2"

									#define MSG_NOZZLE2 "Suutin3"

									#define MSG_BED "Alusta"

									#define MSG_FAN_SPEED "Tuul. nopeus"

									#define MSG_FLOW "Virtaus"

									#define MSG_FLOW0 "Virtaus 0"

									#define MSG_FLOW1 "Virtaus 1"

									#define MSG_FLOW2 "Virtaus 2"

									#define MSG_CONTROL "Kontrolli"

									#define MSG_MIN " \002 Min"

									#define MSG_MAX " \002 Max"

									#define MSG_FACTOR " \002 Kerr"

									#define MSG_AUTOTEMP "Autotemp"

									#define MSG_ON "On "

									#define MSG_OFF "Off"

									#define MSG_PID_P "PID-P"

									#define MSG_PID_I "PID-I"

									#define MSG_PID_D "PID-D"

									#define MSG_PID_C "PID-C"

									#define MSG_ACC  "Kiihtyv"

									#define MSG_VXY_JERK "Vxy-jerk"

									#define MSG_VZ_JERK "Vz-jerk"

									#define MSG_VE_JERK "Ve-jerk"

									#define MSG_VMAX "Vmax "

									#define MSG_X "x"

									#define MSG_Y "y"

									#define MSG_Z "z"

									#define MSG_E "e"

									#define MSG_VMIN "Vmin"

									#define MSG_VTRAV_MIN "VLiike min"

									#define MSG_AMAX "Amax "

									#define MSG_A_RETRACT "A-peruuta"

									#define MSG_XSTEPS "Xsteps/mm"

									#define MSG_YSTEPS "Ysteps/mm"

									#define MSG_ZSTEPS "Zsteps/mm"

									#define MSG_ESTEPS "Esteps/mm"

									#define MSG_RECTRACT "Veda takaisin"

									#define MSG_TEMPERATURE "Lampotila"

									#define MSG_MOTION "Liike"

									#define MSG_CONTRAST "LCD contrast"

									#define MSG_STORE_EPROM "Tallenna muistiin"

									#define MSG_LOAD_EPROM "Lataa muistista"

									#define MSG_RESTORE_FAILSAFE "Palauta oletus"

									#define MSG_REFRESH "Paivita"

									#define MSG_WATCH "Seuraa"

									#define MSG_PREPARE "Valmistele"

									#define MSG_TUNE "Saada"

									#define MSG_PAUSE_PRINT "Keskeyta tulostus"

									#define MSG_RESUME_PRINT "Jatka tulostusta"

									#define MSG_STOP_PRINT "Pysayta tulostus"

									#define MSG_CARD_MENU "Korttivalikko"

									#define MSG_NO_CARD "Ei korttia"

									#define MSG_DWELL "Nukkumassa..."

									#define MSG_USERWAIT "Odotet. valintaa"

									#define MSG_RESUMING "Jatke. tulostusta"

									#define MSG_NO_MOVE "Ei liiketta."

									#define MSG_KILLED "KILLED. "

									#define MSG_STOPPED "STOPPED. "

									#define MSG_CONTROL_RETRACT  "Veda mm"

									#define MSG_CONTROL_RETRACT_SWAP  "Va. Veda mm"

									#define MSG_CONTROL_RETRACTF "Veda V"

									#define MSG_CONTROL_RETRACT_ZLIFT "Z mm"

									#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"

									#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Va. UnRet +mm"

									#define MSG_CONTROL_RETRACT_RECOVERF "UnRet  V"

									#define MSG_AUTORETRACT "AutoVeto."

									#define MSG_FILAMENTCHANGE "Change filament"

									#define MSG_INIT_SDCARD "Init. SD-Card"

									#define MSG_CNG_SDCARD "Change SD-Card"

									#define MSG_ZPROBE_OUT "Z probe out. bed"

									#define MSG_POSITION_UNKNOWN "Home X/Y before Z"

									#define MSG_ZPROBE_ZOFFSET "Z Offset"

									#define MSG_BABYSTEP_X "Babystep X"

									#define MSG_BABYSTEP_Y "Babystep Y"

									#define MSG_BABYSTEP_Z "Babystep Z"

									#define MSG_ENDSTOP_ABORT "Endstop abort"


								#endif


								#if LANGUAGE_CHOICE == 10


								// LCD Menu Messages

								// Please note these are limited to 17 characters!


									#define WELCOME_MSG MACHINE_NAME " parada."

									#define MSG_SD_INSERTED "Tarcheta colocada"

									#define MSG_SD_REMOVED "Tarcheta retirada"

									#define MSG_MAIN "Menu prencipal"

									#define MSG_AUTOSTART " Autostart"

									#define MSG_DISABLE_STEPPERS "Amortar motors"

									#define MSG_AUTO_HOME "Levar a l'orichen"

									#define MSG_SET_ORIGIN "Establir zero"

									#define MSG_PREHEAT_PLA "Precalentar PLA"

									#define MSG_PREHEAT_PLA0 "Precalentar PLA0"

									#define MSG_PREHEAT_PLA1 "Precalentar PLA1"

									#define MSG_PREHEAT_PLA2 "Precalentar PLA2"

									#define MSG_PREHEAT_PLA012 "Precalentar PLA a"

									#define MSG_PREHEAT_PLA_BEDONLY  "Prec. PLA Base"

									#define MSG_PREHEAT_PLA_SETTINGS "Achustar tem. PLA"

									#define MSG_PREHEAT_ABS "Precalentar ABS"

									#define MSG_PREHEAT_ABS0 "Precalentar ABS0"

									#define MSG_PREHEAT_ABS1 "Precalentar ABS1"

									#define MSG_PREHEAT_ABS2 "Precalentar ABS2"

									#define MSG_PREHEAT_ABS012 "Precalentar ABS a"

									#define MSG_PREHEAT_ABS_BEDONLY  "Prec. ABS Base"

									#define MSG_PREHEAT_ABS_SETTINGS "Achustar tem. ABS"

									#define MSG_COOLDOWN "Enfriar"

									#define MSG_SWITCH_PS_ON "Enchegar Fuent"

									#define MSG_SWITCH_PS_OFF "Desenchegar Fuent"

									#define MSG_EXTRUDE "Extruir"

									#define MSG_RETRACT "Retraer"

									#define MSG_MOVE_AXIS "Mover Eixes"

									#define MSG_MOVE_X "Move X"

									#define MSG_MOVE_Y "Move Y"

									#define MSG_MOVE_Z "Move Z"

									#define MSG_MOVE_E "Extruder"

									#define MSG_MOVE_E1 "Extruder2"

									#define MSG_MOVE_E2 "Extruder3"

									#define MSG_MOVE_01MM "Move 0.1mm"

									#define MSG_MOVE_1MM "Move 1mm"

									#define MSG_MOVE_10MM "Move 10mm"

									#define MSG_SPEED "Velocidat"

									#define MSG_NOZZLE "Nozzle"

									#define MSG_NOZZLE1 "Nozzle2"

									#define MSG_NOZZLE2 "Nozzle3"

									#define MSG_BED "Base"

									#define MSG_FAN_SPEED "Ixoriador"

									#define MSG_FLOW "Fluxo"

									#define MSG_FLOW0 "Fluxo 0"

									#define MSG_FLOW1 "Fluxo 1"

									#define MSG_FLOW2 "Fluxo 2"

									#define MSG_CONTROL "Control"

									#define MSG_MIN "\002 Min"

									#define MSG_MAX "\002 Max"

									#define MSG_FACTOR "\002 Fact"

									#define MSG_AUTOTEMP "Autotemp"

									#define MSG_ON "On"

									#define MSG_OFF "Off"

									#define MSG_PID_P "PID-P"

									#define MSG_PID_I "PID-I"

									#define MSG_PID_D "PID-D"

									#define MSG_PID_C "PID-C"

									#define MSG_ACC  "Acel"

									#define MSG_VXY_JERK "Vxy-jerk"

									#define MSG_VZ_JERK "Vz-jerk"

									#define MSG_VE_JERK "Ves-jerk"

									#define MSG_VMAX "Vmax"

									#define MSG_X "x"

									#define MSG_Y "y"

									#define MSG_Z "z"

									#define MSG_E "y"

									#define MSG_VMIN "Vmin"

									#define MSG_VTRAV_MIN "VTrav min"

									#define MSG_AMAX "Amax"

									#define MSG_A_RETRACT "A-retrac."

									#define MSG_XSTEPS "X trangos/mm"

									#define MSG_YSTEPS "Y trangos/mm"

									#define MSG_ZSTEPS "Z trangos/mm"

									#define MSG_ESTEPS "E trangos/mm"

									#define MSG_RECTRACT "Retraer"

									#define MSG_TEMPERATURE "Temperatura"

									#define MSG_MOTION "Movimiento"

									#define MSG_STORE_EPROM "Alzar Memoria"

									#define MSG_LOAD_EPROM "Cargar Memoria"

									#define MSG_RESTORE_FAILSAFE "Rest. d'emerchen."

									#define MSG_REFRESH "Tornar a cargar"

									#define MSG_WATCH "Monitorizar"

									#define MSG_PREPARE "Preparar"

									#define MSG_TUNE "Achustar"

									#define MSG_PAUSE_PRINT "Pausar impresion"

									#define MSG_RESUME_PRINT "Contin. impresion"

									#define MSG_STOP_PRINT "Detener Impresion"

									#define MSG_CARD_MENU "Menu de SD"

									#define MSG_NO_CARD "No i hai tarcheta"

									#define MSG_DWELL "Reposo..."

									#define MSG_USERWAIT "Asperan. ordines"

									#define MSG_RESUMING "Contin. impresion"

									#define MSG_NO_MOVE "Sin movimiento"

									#define MSG_KILLED "ATURADA D'EMERCH."

									#define MSG_STOPPED "ATURADA."

									#define MSG_CONTROL_RETRACT  "Retraer mm"

									#define MSG_CONTROL_RETRACT_SWAP  "Swap Retraer mm"

									#define MSG_CONTROL_RETRACTF "Retraer  F"

									#define MSG_CONTROL_RETRACT_ZLIFT "Devantar mm"

									#define MSG_CONTROL_RETRACT_RECOVER "DesRet +mm"

									#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Swap DesRet +mm"

									#define MSG_CONTROL_RETRACT_RECOVERF "DesRet F"

									#define MSG_AUTORETRACT "AutoRetr."

									#define MSG_FILAMENTCHANGE "Cambear"

									#define MSG_INIT_SDCARD "Encetan. tarcheta"

									#define MSG_CNG_SDCARD "Cambiar tarcheta"

									#define MSG_RECTRACT_WIDE "Retraer"

									#define MSG_TEMPERATURE_WIDE "Temperatura"

									#define MSG_TEMPERATURE_RTN  "Temperatura"

									#define MSG_MAIN_WIDE "Menu Prencipal"

									#define MSG_MOTION_WIDE "Movimiento"

									#define MSG_PREPARE_ALT "Preparar"

									#define MSG_CONTROL_ARROW "Control"

									#define MSG_RETRACT_ARROW "Retraer"

									#define MSG_STEPPER_RELEASED "Desacoplada."

									#define MSG_ZPROBE_OUT "Z probe out. bed"

									#define MSG_POSITION_UNKNOWN "Home X/Y before Z"

									#define MSG_ZPROBE_ZOFFSET "Z Offset"

									#define MSG_BABYSTEP_X "Babystep X"

									#define MSG_BABYSTEP_Y "Babystep Y"

									#define MSG_BABYSTEP_Z "Babystep Z"

									#define MSG_ENDSTOP_ABORT "Endstop abort"

									#define MSG_CONTRAST "Contrast"


								#endif


								#if LANGUAGE_CHOICE == 11 //Dutch


								// LCD Menu Messages

								// Please note these are limited to 17 characters!


									#define WELCOME_MSG MACHINE_NAME " gereed."

									#define MSG_SD_INSERTED "Kaart ingestoken"

									#define MSG_SD_REMOVED "Kaart verwijderd"

									#define MSG_MAIN "Main"

									#define MSG_AUTOSTART "Autostart"

									#define MSG_DISABLE_STEPPERS "Motoren uit"

									#define MSG_AUTO_HOME "Auto home"

									#define MSG_SET_ORIGIN "Nulpunt instellen"

									#define MSG_PREHEAT_PLA "PLA voorverwarmen"

									#define MSG_PREHEAT_PLA0 "PLA voorverw. 0"

									#define MSG_PREHEAT_PLA1 "PLA voorverw. 1"

									#define MSG_PREHEAT_PLA2 "PLA voorverw. 2"

									#define MSG_PREHEAT_PLA012 "PLA voorverw. aan"

									#define MSG_PREHEAT_PLA_BEDONLY  "PLA voorverw. Bed"

									#define MSG_PREHEAT_PLA_SETTINGS "PLA verw. conf"

									#define MSG_PREHEAT_ABS "ABS voorverwarmen"

									#define MSG_PREHEAT_ABS0 "ABS voorverw. 0"

									#define MSG_PREHEAT_ABS1 "ABS voorverw. 1"

									#define MSG_PREHEAT_ABS2 "ABS voorverw. 2"

									#define MSG_PREHEAT_ABS012 "ABS voorverw. aan"

									#define MSG_PREHEAT_ABS_BEDONLY  "ABS voorverw. Bed"

									#define MSG_PREHEAT_ABS_SETTINGS "ABS verw. conf"

									#define MSG_COOLDOWN "Afkoelen"

									#define MSG_SWITCH_PS_ON "Stroom aan"

									#define MSG_SWITCH_PS_OFF "Stroom uit"

									#define MSG_EXTRUDE "Extrude"

									#define MSG_RETRACT "Retract"

									#define MSG_MOVE_AXIS "As verplaatsen"

									#define MSG_MOVE_X "Verplaats X"

									#define MSG_MOVE_Y "Verplaats Y"

									#define MSG_MOVE_Z "Verplaats Z"

									#define MSG_MOVE_E "Extruder"

									#define MSG_MOVE_E1 "Extruder2"

									#define MSG_MOVE_E2 "Extruder3"

									#define MSG_MOVE_01MM "Verplaats 0.1mm"

									#define MSG_MOVE_1MM "Verplaats 1mm"

									#define MSG_MOVE_10MM "Verplaats 10mm"

									#define MSG_SPEED "Snelheid"

									#define MSG_NOZZLE "Nozzle"

									#define MSG_NOZZLE1 "Nozzle2"

									#define MSG_NOZZLE2 "Nozzle3"

									#define MSG_BED "Bed"

									#define MSG_FAN_SPEED "Fan snelheid"

									#define MSG_FLOW "Flow"

									#define MSG_FLOW0 "Flow 0"

									#define MSG_FLOW1 "Flow 1"

									#define MSG_FLOW2 "Flow 2"

									#define MSG_CONTROL "Control"

									#define MSG_MIN " \002 Min"

									#define MSG_MAX " \002 Max"

									#define MSG_FACTOR " \002 Fact"

									#define MSG_AUTOTEMP "Autotemp"

									#define MSG_ON "Aan "

									#define MSG_OFF "Uit"

									#define MSG_PID_P "PID-P"

									#define MSG_PID_I "PID-I"

									#define MSG_PID_D "PID-D"

									#define MSG_PID_C "PID-C"

									#define MSG_ACC  "Versn"

									#define MSG_VXY_JERK "Vxy-jerk"

									#define MSG_VZ_JERK "Vz-jerk"

									#define MSG_VE_JERK "Ve-jerk"

									#define MSG_VMAX "Vmax "

									#define MSG_X "x"

									#define MSG_Y "y"

									#define MSG_Z "z"

									#define MSG_E "e"

									#define MSG_VMIN "Vmin"

									#define MSG_VTRAV_MIN "VTrav min"

									#define MSG_AMAX "Amax "

									#define MSG_A_RETRACT "A-retract"

									#define MSG_XSTEPS "Xsteps/mm"

									#define MSG_YSTEPS "Ysteps/mm"

									#define MSG_ZSTEPS "Zsteps/mm"

									#define MSG_ESTEPS "Esteps/mm"

									#define MSG_RECTRACT "Terugtrekken"

									#define MSG_TEMPERATURE "Temperatuur"

									#define MSG_MOTION "Beweging"

									#define MSG_CONTRAST "LCD contrast"

									#define MSG_STORE_EPROM "Geheugen opslaan"

									#define MSG_LOAD_EPROM "Geheugen laden"

									#define MSG_RESTORE_FAILSAFE "Noodstop reset"

									#define MSG_REFRESH "Ververs"

									#define MSG_WATCH "Info scherm"

									#define MSG_PREPARE "Voorbereiden"

									#define MSG_TUNE "Afstellen"

									#define MSG_PAUSE_PRINT "Print pauzeren"

									#define MSG_RESUME_PRINT "Print hervatten"

									#define MSG_STOP_PRINT "Print stoppen"

									#define MSG_CARD_MENU "Print van SD"

									#define MSG_NO_CARD "Geen SD kaart"

									#define MSG_DWELL "Slapen..."

									#define MSG_USERWAIT "Wachten..."

									#define MSG_RESUMING "Print hervatten"

									#define MSG_NO_MOVE "Geen beweging."

									#define MSG_KILLED "AFGEBROKEN. "

									#define MSG_STOPPED "GESTOPT. "

									#define MSG_CONTROL_RETRACT  "Retract mm"

									#define MSG_CONTROL_RETRACT_SWAP "Ruil Retract mm"

									#define MSG_CONTROL_RETRACTF "Retract  F"

									#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"

									#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"

									#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Ruil UnRet +mm"

									#define MSG_CONTROL_RETRACT_RECOVERF "UnRet  F"

									#define MSG_AUTORETRACT "AutoRetr."

									#define MSG_FILAMENTCHANGE "Verv. Filament"

									#define MSG_INIT_SDCARD "Init. SD kaart"

									#define MSG_CNG_SDCARD "Verv. SD card"

									#define MSG_ZPROBE_OUT "Z probe uit. bed"

									#define MSG_POSITION_UNKNOWN "Home X/Y voor Z"

									#define MSG_ZPROBE_ZOFFSET "Z Offset"

									#define MSG_BABYSTEP_X "Babystap X"

									#define MSG_BABYSTEP_Y "Babystap Y"

									#define MSG_BABYSTEP_Z "Babystap Z"

									#define MSG_ENDSTOP_ABORT "Endstop afbr."


								#endif


								#if LANGUAGE_CHOICE == 12


								// LCD Menu Messages


								// Please note these are limited to 17 characters!


									#define WELCOME_MSG MACHINE_NAME " preparada."

									#define MSG_SD_INSERTED "SD detectada."

									#define MSG_SD_REMOVED "SD expulsada."

									#define MSG_MAIN "Menu principal"

									#define MSG_AUTOSTART "Inici automatic"

									#define MSG_DISABLE_STEPPERS "Apagar motors"

									#define MSG_AUTO_HOME "Home global"

									#define MSG_SET_ORIGIN "Establir origen"

									#define MSG_PREHEAT_PLA "Preescalfar PLA"

									#define MSG_PREHEAT_PLA0 "Preescalfar PLA 1"

									#define MSG_PREHEAT_PLA1 "Preescalfar PLA 2"

									#define MSG_PREHEAT_PLA2 "Preescalfar PLA 3"

									#define MSG_PREHEAT_PLA012 "Preesc. tot PLA"

									#define MSG_PREHEAT_PLA_BEDONLY "Preesc. llit PLA"

									#define MSG_PREHEAT_PLA_SETTINGS "Configuració PLA"

									#define MSG_PREHEAT_ABS "Preescalfar ABS"

									#define MSG_PREHEAT_ABS0 "Preescalfar ABS 1"

									#define MSG_PREHEAT_ABS1 "Preescalfar ABS 2"

									#define MSG_PREHEAT_ABS2 "Preescalfar ABS 3"

									#define MSG_PREHEAT_ABS012 "Preesc. tot ABS"

									#define MSG_PREHEAT_ABS_BEDONLY "Preesc. llit ABS"

									#define MSG_PREHEAT_ABS_SETTINGS "Configuració ABS"

									#define MSG_COOLDOWN "Refredar"

									#define MSG_SWITCH_PS_ON "Switch power on"

									#define MSG_SWITCH_PS_OFF "Switch power off"

									#define MSG_EXTRUDE "Extruir"

									#define MSG_RETRACT "Refredar"

									#define MSG_MOVE_AXIS "Moure eixos"

									#define MSG_MOVE_X "Moure X"

									#define MSG_MOVE_Y "Moure Y"

									#define MSG_MOVE_Z "Moure Z"

									#define MSG_MOVE_E "Extrusor"

									#define MSG_MOVE_E1 "Extruder2"

									#define MSG_MOVE_E2 "Extruder3"

									#define MSG_MOVE_01MM "Moure 0.1mm"

									#define MSG_MOVE_1MM "Moure 1mm"

									#define MSG_MOVE_10MM "Moure 10mm"

									#define MSG_SPEED "Velocitat"

									#define MSG_NOZZLE "Nozzle"

									#define MSG_NOZZLE1 "Nozzle2"

									#define MSG_NOZZLE2 "Nozzle3"

									#define MSG_BED "Llit"

									#define MSG_FAN_SPEED "Vel. Ventilador"

									#define MSG_FLOW "Fluxe"

									#define MSG_FLOW0 "Fluxe 0"

									#define MSG_FLOW1 "Fluxe 1"

									#define MSG_FLOW2 "Fluxe 2"

									#define MSG_CONTROL "Control"

									#define MSG_MIN " \002 Min"

									#define MSG_MAX " \002 Max"

									#define MSG_FACTOR " \002 Fact"

									#define MSG_AUTOTEMP "Autotemp"

									#define MSG_ON "On "

									#define MSG_OFF "Off"

									#define MSG_PID_P "PID-P"

									#define MSG_PID_I "PID-I"

									#define MSG_PID_D "PID-D"

									#define MSG_PID_C "PID-C"

									#define MSG_ACC  "Accel"

									#define MSG_VXY_JERK "Vxy-jerk"

									#define MSG_VZ_JERK "Vz-jerk"

									#define MSG_VE_JERK "Ve-jerk"

									#define MSG_VMAX "Vmax "

									#define MSG_X "x"

									#define MSG_Y "y"

									#define MSG_Z "z"

									#define MSG_E "e"

									#define MSG_VMIN "Vmin"

									#define MSG_VTRAV_MIN "VTrav min"

									#define MSG_AMAX "Amax "

									#define MSG_A_RETRACT "A-retract"

									#define MSG_XSTEPS "Xpassos/mm"

									#define MSG_YSTEPS "Ypassos/mm"

									#define MSG_ZSTEPS "Zpassos/mm"

									#define MSG_ESTEPS "Epassos/mm"

									#define MSG_RECTRACT "Retreure"

									#define MSG_TEMPERATURE "Temperatura"

									#define MSG_MOTION "Moviment"

									#define MSG_CONTRAST "Contrast de LCD"

									#define MSG_STORE_EPROM "Desar a memoria"

									#define MSG_LOAD_EPROM "Carregar de mem."

									#define MSG_RESTORE_FAILSAFE "Rest. emergencia"

									#define MSG_REFRESH "Refrescar"

									#define MSG_WATCH "Pantalla Info."

									#define MSG_PREPARE "Preparar"

									#define MSG_TUNE "Calibrar"

									#define MSG_PAUSE_PRINT "Pausa imp."

									#define MSG_RESUME_PRINT "Reprendre imp."

									#define MSG_STOP_PRINT "Parar inp."

									#define MSG_CARD_MENU "Imprimir de SD"

									#define MSG_NO_CARD "-Sense targeta SD"

									#define MSG_DWELL "Repos..."

									#define MSG_USERWAIT "Esperant usuari.."

									#define MSG_RESUMING "Reprenent imp."

									#define MSG_NO_MOVE "Sense moviment."

									#define MSG_KILLED "PARADA DE EMERG. "

									#define MSG_STOPPED "ATURAT. "

									#define MSG_CONTROL_RETRACT  "Retreure mm"

									#define MSG_CONTROL_RETRACT_SWAP  "Swap Retreure mm"

									#define MSG_CONTROL_RETRACTF "Retreure  F"

									#define MSG_CONTROL_RETRACT_ZLIFT "Aixecar mm"

									#define MSG_CONTROL_RETRACT_RECOVER "DesRet +mm"

									#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Swap DesRet +mm"

									#define MSG_CONTROL_RETRACT_RECOVERF "DesRet  F"

									#define MSG_AUTORETRACT "AutoRetr."

									#define MSG_FILAMENTCHANGE "Canviar filament"

									#define MSG_INIT_SDCARD "Iniciant SD"

									#define MSG_CNG_SDCARD "Canviar SD"

									#define MSG_ZPROBE_OUT "Z probe out. bed"

									#define MSG_POSITION_UNKNOWN "Home X/Y abans Z"

									#define MSG_ZPROBE_ZOFFSET "Z Offset"

									#define MSG_BABYSTEP_X "Babystep X"

									#define MSG_BABYSTEP_Y "Babystep Y"

									#define MSG_BABYSTEP_Z "Babystep Z"

									#define MSG_ENDSTOP_ABORT "Endstop abort"


								#endif


								//Basque-Euskera

								#if LANGUAGE_CHOICE == 13


								// LCD Menu Messages

								// Please note these are limited to 17 characters!


									#define WELCOME_MSG MACHINE_NAME " prest."

									#define MSG_SD_INSERTED "Txartela sartuta"

									#define MSG_SD_REMOVED "Txartela kenduta"

									#define MSG_MAIN "Menu nagusia"

									#define MSG_AUTOSTART "Auto hasiera"

									#define MSG_DISABLE_STEPPERS "Itzali motoreak"

									#define MSG_AUTO_HOME "Hasierara joan"

									#define MSG_SET_ORIGIN "Hasiera ipini"

									#define MSG_PREHEAT_PLA "Aurreberotu PLA"

									#define MSG_PREHEAT_PLA0 "Aurreberotu PLA1"

									#define MSG_PREHEAT_PLA1 "Aurreberotu PLA2"

									#define MSG_PREHEAT_PLA2 "Aurreberotu PLA3"

									#define MSG_PREHEAT_PLA012 "Berotu PLA Guztia"

									#define MSG_PREHEAT_PLA_BEDONLY "Berotu PLA Ohea"

									#define MSG_PREHEAT_PLA_SETTINGS "Berotu PLA Konfig"

									#define MSG_PREHEAT_ABS "Aurreberotu ABS"

									#define MSG_PREHEAT_ABS0 "Aurreberotu ABS 1"

									#define MSG_PREHEAT_ABS1 "Aurreberotu ABS 2"

									#define MSG_PREHEAT_ABS2 "Aurreberotu ABS 3"

									#define MSG_PREHEAT_ABS012 "Berotu ABS Guztia"

									#define MSG_PREHEAT_ABS_BEDONLY "Berotu ABS Ohea"

									#define MSG_PREHEAT_ABS_SETTINGS "Berotu ABS Konfig"

									#define MSG_COOLDOWN "Hoztu"

									#define MSG_SWITCH_PS_ON "Energia piztu"

									#define MSG_SWITCH_PS_OFF "Energia itzali"

									#define MSG_EXTRUDE "Estruitu"

									#define MSG_RETRACT "Atzera eragin"

									#define MSG_MOVE_AXIS "Ardatzak mugitu"

									#define MSG_MOVE_X "Mugitu X"

									#define MSG_MOVE_Y "Mugitu Y"

									#define MSG_MOVE_Z "Mugitu Z"

									#define MSG_MOVE_E "Estrusorea"

									#define MSG_MOVE_E1 "Estrusorea2"

									#define MSG_MOVE_E2 "Estrusorea3"

									#define MSG_MOVE_01MM "Mugitu 0.1mm"

									#define MSG_MOVE_1MM "Mugitu 1mm"

									#define MSG_MOVE_10MM "Mugitu 10mm"

									#define MSG_SPEED "Abiadura"

									#define MSG_NOZZLE "Pita"

									#define MSG_NOZZLE1 "Pita2"

									#define MSG_NOZZLE2 "Pita3"

									#define MSG_BED "Ohea"

									#define MSG_FAN_SPEED "Haizagailua"

									#define MSG_FLOW "Fluxua"

									#define MSG_FLOW0 "Fluxua 0"

									#define MSG_FLOW1 "Fluxua 1"

									#define MSG_FLOW2 "Fluxua 2"

									#define MSG_CONTROL "Kontrola"

									#define MSG_MIN " \002 Min"

									#define MSG_MAX " \002 Max"

									#define MSG_FACTOR " \002 Faktorea"

									#define MSG_AUTOTEMP "Auto tenperatura"

									#define MSG_ON "On "

									#define MSG_OFF "Off"

									#define MSG_PID_P "PID-P"

									#define MSG_PID_I "PID-I"

									#define MSG_PID_D "PID-D"

									#define MSG_PID_C "PID-C"

									#define MSG_ACC  "Azelerazioa"

									#define MSG_VXY_JERK "Vxy-astindua"

									#define MSG_VZ_JERK "Vz-astindua"

									#define MSG_VE_JERK "Ve-astindua"

									#define MSG_VMAX "Vmax "

									#define MSG_X "x"

									#define MSG_Y "y"

									#define MSG_Z "z"

									#define MSG_E "e"

									#define MSG_VMIN "Vmin"

									#define MSG_VTRAV_MIN "VTrav min"

									#define MSG_AMAX "Amax "

									#define MSG_A_RETRACT "A-retrakt"

									#define MSG_XSTEPS "X pausoak/mm"

									#define MSG_YSTEPS "Y pausoak/mm"

									#define MSG_ZSTEPS "Z pausoak/mm"

									#define MSG_ESTEPS "E pausoak/mm"

									#define MSG_RECTRACT "Atzera eragin"

									#define MSG_TEMPERATURE "Tenperatura"

									#define MSG_MOTION "Mugimendua"

									#define MSG_CONTRAST "LCD kontrastea"

									#define MSG_STORE_EPROM "Gorde memoria"

									#define MSG_LOAD_EPROM "Kargatu memoria"

									#define MSG_RESTORE_FAILSAFE "Larri. berriz."

									#define MSG_REFRESH "Berriz kargatu"

									#define MSG_WATCH "Pantaila info"

									#define MSG_PREPARE "Prestatu"

									#define MSG_TUNE "Doitu"

									#define MSG_PAUSE_PRINT "Pausatu inprimak."

									#define MSG_RESUME_PRINT "Jarraitu inprima."

									#define MSG_STOP_PRINT "Gelditu inprima."

									#define MSG_CARD_MENU "SD-tik inprimatu"

									#define MSG_NO_CARD "Ez dago txartelik"

									#define MSG_DWELL "Lo egin..."

									#define MSG_USERWAIT "Aginduak zain..."

									#define MSG_RESUMING "Jarraitzen inpri."

									#define MSG_NO_MOVE "Mugimendu gabe"

									#define MSG_KILLED "LARRIALDI GELDIA"

									#define MSG_STOPPED "GELDITUTA. "

									#define MSG_CONTROL_RETRACT  "Atzera egin mm"

									#define MSG_CONTROL_RETRACT_SWAP  "Swap Atzera egin mm"

									#define MSG_CONTROL_RETRACTF "Atzera egin V"

									#define MSG_CONTROL_RETRACT_ZLIFT "Igo mm"

									#define MSG_CONTROL_RETRACT_RECOVER "Atzera egin +mm"

									#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Swap Atzera egin +mm"

									#define MSG_CONTROL_RETRACT_RECOVERF "Atzera egin V"

									#define MSG_AUTORETRACT "Atzera egin"

									#define MSG_FILAMENTCHANGE "Aldatu filament."

									#define MSG_INIT_SDCARD "Hasieratu txartela"

									#define MSG_CNG_SDCARD "Aldatu txartela"

									#define MSG_ZPROBE_OUT "Z ohe hasiera"

									#define MSG_POSITION_UNKNOWN "Posizio ezezaguna"

									#define MSG_ZPROBE_ZOFFSET "Z konpentsatu"

									#define MSG_BABYSTEP_X "Babystep X"

									#define MSG_BABYSTEP_Y "Babystep Y"

									#define MSG_BABYSTEP_Z "Babystep Z"

									#define MSG_ENDSTOP_ABORT "Endstop deuseztat"


								#endif


								#endif // ifndef LANGUAGE_H