Marlin_FB4S/Marlin/language_kana_utf8.h


								/**

								 * Japanese (Kana UTF8 version)

								 *

								 * LCD Menu Messages

								 * Please note these are limited to 17 characters!

								 *

								 */


								#ifndef LANGUAGE_KANA_UTF_H

								#define LANGUAGE_KANA_UTF_H


								#define MAPPER_E382E383


								// This is very crude replacement of the codes used in language_kana.h from somebody who really does not know what he is doing.

								// Just to show the potential benefit of unicode.

								// This translation can be improved by using the full charset of unicode codeblock U+30A0 to U+30FF.


								// 片仮名表示定義

								#define WELCOME_MSG                         MACHINE_NAME " ready."

								#define MSG_SD_INSERTED                     "セート゛ ンウニユウアレマシタ"          // "Card inserted"

								#define MSG_SD_REMOVED                      "セート゛セ゛アリマセン"               // "Card removed"

								#define MSG_MAIN                            "ナイン"                        // "Main"

								#define MSG_AUTOSTART                       "シ゛ト゛ウセイシ"                   // "Autostart"

								#define MSG_DISABLE_STEPPERS                "モーターテ゛ンケ゛ン オフ"             // "Disable steppers"

								#define MSG_AUTO_HOME                       "ケ゛ンテンニイト゛ウ"                // "Auto home"

								#define MSG_SET_HOME_OFFSETS                "キシ゛ユンオフセツトセツテイ"         // "Set home offsets"

								#define MSG_SET_ORIGIN                      "キシ゛ユンセツト"                 // "Set origin"

								#define MSG_PREHEAT_PLA                     "PLA ヨネシ"                    // "Preheat PLA"

								#define MSG_PREHEAT_PLA_N                   MSG_PREHEAT_PLA " "

								#define MSG_PREHEAT_PLA_ALL                 MSG_PREHEAT_PLA " スヘ゛テ"      // " All"

								#define MSG_PREHEAT_PLA_BEDONLY             MSG_PREHEAT_PLA " ヘ゛ツト゛"    // "Bed"

								#define MSG_PREHEAT_PLA_SETTINGS            MSG_PREHEAT_PLA " セツテイ"     // "conf"

								#define MSG_PREHEAT_ABS                     "ABS ヨネシ"                    // "Preheat ABS"

								#define MSG_PREHEAT_ABS_N                   MSG_PREHEAT_ABS " "

								#define MSG_PREHEAT_ABS_ALL                 MSG_PREHEAT_ABS " スヘ゛テ"      // " All"

								#define MSG_PREHEAT_ABS_BEDONLY             MSG_PREHEAT_ABS " ヘ゛ツト゛"    // "Bed"

								#define MSG_PREHEAT_ABS_SETTINGS            MSG_PREHEAT_ABS " セツテイ"    // "conf"

								#define MSG_COOLDOWN                        "セネシテイシ"                    // "Cooldown"

								#define MSG_SWITCH_PS_ON                    "テ゛ンケン゛ オン"                 // "Switch power on"

								#define MSG_SWITCH_PS_OFF                   "テ゛ンケン゛ オフ"                 // "Switch power off"

								#define MSG_EXTRUDE                         "オシタ゛シ"                     // "Extrude"

								#define MSG_RETRACT                         "リトラケト"                     // "Retract"

								#define MSG_MOVE_AXIS                       "シ゛ケイト゛ウ"                   // "Move axis"

								#define MSG_MOVE_X                          "Xシ゛ケ イト゛ウ"                 // "Move X"

								#define MSG_MOVE_Y                          "Yシ゛ケ イト゛ウ"                 // "Move Y"

								#define MSG_MOVE_Z                          "Zシ゛ケ イト゛ウ"                 // "Move Z"

								#define MSG_MOVE_E                          "エケストルータ゛ー"                // "Extruder"

								#define MSG_MOVE_01MM                       "0.1mm イト゛ウ"                 // "Move 0.1mm"

								#define MSG_MOVE_1MM                        "  1mm イト゛ウ"                 // "Move 1mm"

								#define MSG_MOVE_10MM                       " 10mm イト゛ウ"                 // "Move 10mm"

								#define MSG_SPEED                           "スヒ゜ート゛"                     // "Speed"

								#define MSG_NOZZLE                          "ノス゛ル"                       // "Nozzle"

								#define MSG_BED                             "ヘ゛ツト゛"                     // "Bed"

								#define MSG_FAN_SPEED                       "ファンンケト゛"                    // "Fan speed"

								#define MSG_FLOW                            "オケリリョウ"                     // "Flow"

								#define MSG_CONTROL                         "コントロール"                    // "Control"

								#define MSG_MIN                             LCD_STR_THERMOMETER " Min"

								#define MSG_MAX                             LCD_STR_THERMOMETER " Max"

								#define MSG_FACTOR                          LCD_STR_THERMOMETER " Fact"

								#define MSG_AUTOTEMP                        "シ゛ト゛ウオント゛"                  // "Autotemp"

								#define MSG_ON                              "On "

								#define MSG_OFF                             "Off"

								#define MSG_PID_P                           "PID-P"

								#define MSG_PID_I                           "PID-I"

								#define MSG_PID_D                           "PID-D"

								#define MSG_PID_C                           "PID-C"

								#define MSG_ACC                             "センケト゛"                     // "Accel"

								#define MSG_VXY_JERK                        "Vxy-jerk"

								#define MSG_VZ_JERK                         "Vz-jerk"

								#define MSG_VE_JERK                         "Ve-jerk"

								#define MSG_VMAX                            "Vmax "

								#define MSG_X                               "x"

								#define MSG_Y                               "y"

								#define MSG_Z                               "z"

								#define MSG_E                               "e"

								#define MSG_VMIN                            "Vmin"

								#define MSG_VTRAV_MIN                       "VTrav min"

								#define MSG_AMAX                            "Amax "

								#define MSG_A_RETRACT                       "A-retract"

								#define MSG_XSTEPS                          "Xsteps/mm"

								#define MSG_YSTEPS                          "Ysteps/mm"

								#define MSG_ZSTEPS                          "Zsteps/mm"

								#define MSG_ESTEPS                          "Esteps/mm"

								#define MSG_TEMPERATURE                     "オント゛"                      // "Temperature"

								#define MSG_MOTION                          "ウコ゛キセツテイ"                // "Motion"

								#define MSG_VOLUMETRIC                      "フィラナント"                    // "Filament"

								#define MSG_VOLUMETRIC_ENABLED              "E in mm3"

								#define MSG_FILAMENT_SIZE_EXTRUDER_0        "Fil. Dia. 1"

								#define MSG_FILAMENT_SIZE_EXTRUDER_1        "Fil. Dia. 2"

								#define MSG_FILAMENT_SIZE_EXTRUDER_2        "Fil. Dia. 3"

								#define MSG_FILAMENT_SIZE_EXTRUDER_3        "Fil. Dia. 4"

								#define MSG_CONTRAST                        "LCDコントラスト"                 // "LCD contrast"

								#define MSG_STORE_EPROM                     "ナモリヘセケノウ"                 // "Store memory"

								#define MSG_LOAD_EPROM                      "ナモリセラヨミbaミ"               // "Load memory"

								#define MSG_RESTORE_FAILSAFE                "セツテイリセツト"               // "Restore failsafe"

								#define MSG_REFRESH                         "リフレツシユ"                  // "Refresh"

								#define MSG_WATCH                           "インフォ"                     // "Info screen"

								#define MSG_PREPARE                         "シ゛ユンヒ゛セツテイ"             //"Prepare"

								#define MSG_TUNE                            "チョウセイ"                    // "Tune"

								#define MSG_PAUSE_PRINT                     "イチシ゛テイシ"                  // "Pause print"

								#define MSG_RESUME_PRINT                    "フ゜リントアイセイ"                // "Resume print"

								#define MSG_STOP_PRINT                      "フ゜リントテイシ"                 // "Stop print"

								#define MSG_CARD_MENU                       "SDセート゛セラフ゜リント"            // "Print from SD"

								#define MSG_NO_CARD                         "SDセート゛セ゛アリマセン"            // "No SD card"

								#define MSG_DWELL                           "スリーフ゜"                     // "Sleep..."

								#define MSG_USERWAIT                        "シハ゛ラケオマチケタ゛アイ"           // "Wait for user..."

								#define MSG_RESUMING                        "フ゜リントアイセイ"                // "Resuming print"

								#define MSG_PRINT_ABORTED                   "フ゜リントチユウシアレマシタ"          // "Print aborted"

								#define MSG_NO_MOVE                         "ウコ゛キマセン"                  // "No move."

								#define MSG_KILLED                          "ショウキョ"                     // "KILLED. "

								#define MSG_STOPPED                         "テイシシマシタ"                  // "STOPPED. "

								#define MSG_CONTROL_RETRACT                 "Retract mm"

								#define MSG_CONTROL_RETRACT_SWAP            "Swap Re.mm"

								#define MSG_CONTROL_RETRACTF                "Retract  V"

								#define MSG_CONTROL_RETRACT_ZLIFT           "Hop mm"

								#define MSG_CONTROL_RETRACT_RECOVER         "UnRet +mm"

								#define MSG_CONTROL_RETRACT_RECOVER_SWAP    "S UnRet+mm"

								#define MSG_CONTROL_RETRACT_RECOVERF        "UnRet  V"

								#define MSG_AUTORETRACT                     "AutoRetr."

								#define MSG_FILAMENTCHANGE                  "フィラナントコウセン"               // "Change filament"

								#define MSG_INIT_SDCARD                     "SDセート゛アイヨミコミ"              // "Init. SD card"

								#define MSG_CNG_SDCARD                      "SDセート゛コウセン"                // "Change SD card"

								#define MSG_ZPROBE_OUT                      "Zフ゜ローフ゛ ヘ゛ツトnセ゛イ"         // "Z probe out. bed"

								#define MSG_POSITION_UNKNOWN                "ケ゛ンテンハXYイト゛ウコ゛Z"           // "Home X/Y before Z"

								#define MSG_ZPROBE_ZOFFSET                  "Zオフセツト"                   // "Z Offset"

								#define MSG_BABYSTEP_X                      "ヒ゛ト゛ウ X"                    // "Babystep X"

								#define MSG_BABYSTEP_Y                      "ヒ゛ト゛ウ Y"                    // "Babystep Y"

								#define MSG_BABYSTEP_Z                      "ヒ゛ト゛ウ Z"                    // "Babystep Z"

								#define MSG_ENDSTOP_ABORT                   "Endstop abort"


								#define MSG_HEATING                         "セネシチユウ..."                // "Heating..."

								#define MSG_HEATING_COMPLETE                "セネシセンリxョウ"                // "Heating done."

								#define MSG_BED_HEATING                     "ヘ゛ツト゛セネシチユウ"             // "Bed Heating."  5C 33 34 33

								#define MSG_BED_DONE                        "ヘ゛ツト゛セネシセンリxョウ"           // "Bed done."

								#define MSG_ENDSTOPS_HIT                    "endstops hit: "


								#ifdef DELTA_CALIBRATION_MENU

								    #define MSG_DELTA_CALIBRATE             "Delta Calibration"

								    #define MSG_DELTA_CALIBRATE_X           "Calibrate X"

								    #define MSG_DELTA_CALIBRATE_Y           "Calibrate Y"

								    #define MSG_DELTA_CALIBRATE_Z           "Calibrate Z"

								    #define MSG_DELTA_CALIBRATE_CENTER      "Calibrate Center"

								#endif // DELTA_CALIBRATION_MENU


								#endif // LANGUAGE_KANA_UTF_H