You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
264 lines
8.6 KiB
264 lines
8.6 KiB
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
#pragma once
|
|
|
|
/**
|
|
* MKS Robin E3 & E3D (STM32F103RCT6) common board pin assignments
|
|
*/
|
|
|
|
#include "env_validate.h"
|
|
|
|
#define BOARD_WEBSITE_URL "github.com/makerbase-mks"
|
|
|
|
#define BOARD_NO_NATIVE_USB
|
|
#define USES_DIAG_JUMPERS
|
|
|
|
//#define DISABLE_DEBUG
|
|
#define DISABLE_JTAG
|
|
|
|
//
|
|
// EEPROM
|
|
//
|
|
#if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION)
|
|
#define FLASH_EEPROM_EMULATION
|
|
#define EEPROM_PAGE_SIZE (0x800U) // 2KB
|
|
#define EEPROM_START_ADDRESS (0x8000000UL + (STM32_FLASH_SIZE) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL)
|
|
#define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE // 2KB
|
|
#endif
|
|
|
|
//
|
|
// Servos
|
|
//
|
|
#define SERVO0_PIN PA3
|
|
|
|
//
|
|
// Limit Switches
|
|
//
|
|
#define X_STOP_PIN PA12
|
|
#define Y_STOP_PIN PA11
|
|
#define Z_STOP_PIN PC6
|
|
|
|
//
|
|
// Z Probe
|
|
//
|
|
#ifndef Z_MIN_PROBE_PIN
|
|
#define Z_MIN_PROBE_PIN PB1
|
|
#endif
|
|
|
|
//
|
|
// Steppers
|
|
//
|
|
#define X_STEP_PIN PC0
|
|
#define X_DIR_PIN PB2
|
|
#define X_ENABLE_PIN PC13
|
|
|
|
#define Y_STEP_PIN PC2
|
|
#define Y_DIR_PIN PB9
|
|
#define Y_ENABLE_PIN PB12
|
|
|
|
#ifndef Z_STEP_PIN
|
|
#define Z_STEP_PIN PB7
|
|
#endif
|
|
#ifndef Z_DIR_PIN
|
|
#define Z_DIR_PIN PB6
|
|
#endif
|
|
#define Z_ENABLE_PIN PB8
|
|
|
|
#define E0_STEP_PIN PB4
|
|
#define E0_DIR_PIN PB3
|
|
#define E0_ENABLE_PIN PB5
|
|
|
|
#if HAS_TMC_UART
|
|
/**
|
|
* TMC2208/TMC2209 stepper drivers
|
|
*
|
|
* Hardware serial communication ports.
|
|
* If undefined software serial is used according to the pins below
|
|
*/
|
|
//#define X_HARDWARE_SERIAL MSerial1
|
|
//#define Y_HARDWARE_SERIAL MSerial1
|
|
//#define Z_HARDWARE_SERIAL MSerial1
|
|
//#define E0_HARDWARE_SERIAL MSerial1
|
|
|
|
#define X_SERIAL_TX_PIN PC7
|
|
#define X_SERIAL_RX_PIN PC7
|
|
|
|
#define Y_SERIAL_TX_PIN PD2
|
|
#define Y_SERIAL_RX_PIN PD2
|
|
|
|
#define Z_SERIAL_TX_PIN PC12
|
|
#define Z_SERIAL_RX_PIN PC12
|
|
|
|
#define E0_SERIAL_TX_PIN PC11
|
|
#define E0_SERIAL_RX_PIN PC11
|
|
|
|
// Reduce baud rate to improve software serial reliability
|
|
#define TMC_BAUD_RATE 19200
|
|
#endif
|
|
|
|
//
|
|
// Heaters 0,1 / Fans / Bed
|
|
//
|
|
#define HEATER_0_PIN PC9
|
|
#define FAN_PIN PA8
|
|
#define HEATER_BED_PIN PC8
|
|
|
|
//
|
|
// Temperature Sensors
|
|
//
|
|
#define TEMP_BED_PIN PA1 // TB
|
|
#define TEMP_0_PIN PA0 // TH1
|
|
|
|
#define FIL_RUNOUT_PIN PB10 // MT_DET
|
|
|
|
//
|
|
// Power Supply Control
|
|
//
|
|
#if ENABLED(MKS_PWC)
|
|
#define PS_ON_PIN PA14 // PW_OFF
|
|
#define KILL_PIN PB10 // PW_DET
|
|
#define KILL_PIN_STATE HIGH
|
|
#endif
|
|
|
|
/**
|
|
* ------ ------ ------
|
|
* (BEEPER) PC1 |10 9 | PC3 (BTN_ENC) (MISO) PB14 |10 9 | PB13 (SD_SCK) (BEEPER) PC1 |10 9 | PC3 (BTN_ENC)
|
|
* (LCD_EN) PA4 | 8 7 | PA5 (LCD_RS) (BTN_EN1) PB11 | 8 7 | PA15 (SD_SS) (BTN_EN1) PB11 | 8 7 | RESET
|
|
* (LCD_D4) PA6 6 5 | PA7 (LCD_D5) (BTN_EN2) PB0 6 5 | PB15 (SD_MOSI) (BTN_EN2) PB0 6 5 | PA6 (LCD_D4)
|
|
* (LCD_D6) PC4 | 4 3 | PC5 (LCD_D7) (SD_DETECT) PC10 | 4 3 | RESET (LCD_RS) PA5 | 4 3 | PA4 (LCD_EN)
|
|
* GND | 2 1 | 5V GND | 2 1 | -- GND | 2 1 | 5V
|
|
* ------ ------ ------
|
|
* EXP1 EXP2 "Ender-3 EXP1"
|
|
*/
|
|
#define EXP1_03_PIN PC5
|
|
#define EXP1_04_PIN PC4
|
|
#define EXP1_05_PIN PA7
|
|
#define EXP1_06_PIN PA6
|
|
#define EXP1_07_PIN PA5
|
|
#define EXP1_08_PIN PA4
|
|
#define EXP1_09_PIN PC3
|
|
#define EXP1_10_PIN PC1
|
|
|
|
#define EXP2_03_PIN -1 // RESET
|
|
#define EXP2_04_PIN PC10
|
|
#define EXP2_05_PIN PB15
|
|
#define EXP2_06_PIN PB0
|
|
#define EXP2_07_PIN PA15
|
|
#define EXP2_08_PIN PB11
|
|
#define EXP2_09_PIN PB13
|
|
#define EXP2_10_PIN PB14
|
|
|
|
// "Ender-3 EXP1"
|
|
#define E3_EXP1_03_PIN PA4
|
|
#define E3_EXP1_04_PIN PA5
|
|
#define E3_EXP1_05_PIN PA6
|
|
#define E3_EXP1_06_PIN PB0
|
|
#define E3_EXP1_07_PIN -1 // RESET
|
|
#define E3_EXP1_08_PIN PB11
|
|
#define E3_EXP1_09_PIN PC3
|
|
#define E3_EXP1_10_PIN PC1
|
|
|
|
#if HAS_WIRED_LCD
|
|
|
|
#define BEEPER_PIN EXP1_10_PIN
|
|
#define BTN_ENC EXP1_09_PIN
|
|
#define LCD_PINS_ENABLE EXP1_08_PIN
|
|
#define LCD_PINS_RS EXP1_07_PIN
|
|
#define BTN_EN1 EXP2_08_PIN
|
|
#define BTN_EN2 EXP2_06_PIN
|
|
|
|
// MKS MINI12864 and MKS LCD12864B; If using MKS LCD12864A (Need to remove RPK2 resistor)
|
|
#if ENABLED(MKS_MINI_12864)
|
|
|
|
#define LCD_BACKLIGHT_PIN -1
|
|
#define LCD_RESET_PIN -1
|
|
#define DOGLCD_A0 EXP1_04_PIN
|
|
#define DOGLCD_CS EXP1_05_PIN
|
|
#define DOGLCD_SCK EXP2_09_PIN
|
|
#define DOGLCD_MOSI EXP2_05_PIN
|
|
|
|
#elif ENABLED(FYSETC_MINI_12864_2_1)
|
|
#define DOGLCD_CS EXP1_08_PIN
|
|
#define DOGLCD_A0 EXP1_07_PIN
|
|
#define LCD_PINS_DC DOGLCD_A0
|
|
#define LCD_BACKLIGHT_PIN -1
|
|
#define LCD_RESET_PIN EXP1_06_PIN
|
|
#define NEOPIXEL_PIN EXP1_05_PIN
|
|
#define DOGLCD_MOSI EXP2_05_PIN
|
|
#define DOGLCD_SCK EXP2_09_PIN
|
|
#define FORCE_SOFT_SPI
|
|
#define SOFTWARE_SPI
|
|
//#define LCD_SCREEN_ROT_180
|
|
|
|
#else
|
|
|
|
#define LCD_PINS_D4 EXP1_06_PIN
|
|
#if IS_ULTIPANEL
|
|
#define LCD_PINS_D5 EXP1_05_PIN
|
|
#define LCD_PINS_D6 EXP1_04_PIN
|
|
#define LCD_PINS_D7 EXP1_03_PIN
|
|
|
|
#if !defined(BTN_ENC_EN) && ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
|
|
#define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder
|
|
#endif
|
|
|
|
#endif
|
|
|
|
#endif // !MKS_MINI_12864
|
|
|
|
#endif // HAS_WIRED_LCD
|
|
|
|
// Alter timing for graphical display
|
|
#if IS_U8GLIB_ST7920
|
|
#ifndef BOARD_ST7920_DELAY_1
|
|
#define BOARD_ST7920_DELAY_1 125
|
|
#endif
|
|
#ifndef BOARD_ST7920_DELAY_2
|
|
#define BOARD_ST7920_DELAY_2 125
|
|
#endif
|
|
#ifndef BOARD_ST7920_DELAY_3
|
|
#define BOARD_ST7920_DELAY_3 125
|
|
#endif
|
|
#endif
|
|
|
|
// LED driving pin
|
|
#ifndef NEOPIXEL_PIN
|
|
#define NEOPIXEL_PIN PA2
|
|
#endif
|
|
|
|
//
|
|
// SD Card
|
|
//
|
|
#define SDCARD_CONNECTION ONBOARD
|
|
#define SPI_DEVICE 2
|
|
#define ONBOARD_SPI_DEVICE 2
|
|
#define SDSS SD_SS_PIN
|
|
#define ONBOARD_SD_CS_PIN SD_SS_PIN
|
|
#define SD_DETECT_PIN PC10 // EXP2_04_PIN
|
|
#define NO_SD_HOST_DRIVE
|
|
|
|
// TODO: This is the only way to set SPI for SD on STM32 (for now)
|
|
#define ENABLE_SPI2
|
|
#define SD_SCK_PIN EXP2_09_PIN
|
|
#define SD_MISO_PIN EXP2_10_PIN
|
|
#define SD_MOSI_PIN EXP2_05_PIN
|
|
#define SD_SS_PIN EXP2_07_PIN
|
|
|