Marlin 2.0 for Flying Bear 4S/5
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

302 lines
12 KiB

/**********************************************************************
* $Id$ lpc17xx_adc.h 2008-07-27
*//**
* @file lpc17xx_adc.h
* @brief Contains the NXP ABL typedefs for C standard types.
* It is intended to be used in ISO C conforming development
* environments and checks for this insofar as it is possible
* to do so.
* @version 2.0
* @date 27 Jul. 2008
* @author NXP MCU SW Application Team
*
* Copyright(C) 2008, NXP Semiconductor
* All rights reserved.
*
***********************************************************************
* Software that is described herein is for illustrative purposes only
* which provides customers with programming information regarding the
* products. This software is supplied "AS IS" without any warranties.
* NXP Semiconductors assumes no responsibility or liability for the
* use of the software, conveys no license or title under any patent,
* copyright, or mask work right to the product. NXP Semiconductors
* reserves the right to make changes in the software without
* notification. NXP Semiconductors also make no representation or
* warranty that such application will be suitable for the specified
* use without further testing or modification.
* Permission to use, copy, modify, and distribute this software and its
* documentation is hereby granted, under NXP Semiconductors'
* relevant copyright in the software, without fee, provided that it
* is used in conjunction with NXP Semiconductors microcontrollers. This
* copyright, permission, and disclaimer notice must appear in all copies of
* this code.
**********************************************************************/
/* Peripheral group ----------------------------------------------------------- */
/** @defgroup ADC ADC (Analog-to-Digital Converter)
* @ingroup LPC1700CMSIS_FwLib_Drivers
* @{
*/
#ifndef LPC17XX_ADC_H_
#define LPC17XX_ADC_H_
/* Includes ------------------------------------------------------------------- */
#include "LPC17xx.h"
#include "lpc_types.h"
#ifdef __cplusplus
extern "C"
{
#endif
/* Private macros ------------------------------------------------------------- */
/** @defgroup ADC_Private_Macros ADC Private Macros
* @{
*/
/* -------------------------- BIT DEFINITIONS ----------------------------------- */
/*********************************************************************//**
* Macro defines for ADC control register
**********************************************************************/
/** Selects which of the AD0.0:7 pins is (are) to be sampled and converted */
#define ADC_CR_CH_SEL(n) ((1UL << n))
/** The APB clock (PCLK) is divided by (this value plus one)
* to produce the clock for the A/D */
#define ADC_CR_CLKDIV(n) ((n<<8))
/** Repeated conversions A/D enable bit */
#define ADC_CR_BURST ((1UL<<16))
/** ADC convert in power down mode */
#define ADC_CR_PDN ((1UL<<21))
/** Start mask bits */
#define ADC_CR_START_MASK ((7UL<<24))
/** Select Start Mode */
#define ADC_CR_START_MODE_SEL(SEL) ((SEL<<24))
/** Start conversion now */
#define ADC_CR_START_NOW ((1UL<<24))
/** Start conversion when the edge selected by bit 27 occurs on P2.10/EINT0 */
#define ADC_CR_START_EINT0 ((2UL<<24))
/** Start conversion when the edge selected by bit 27 occurs on P1.27/CAP0.1 */
#define ADC_CR_START_CAP01 ((3UL<<24))
/** Start conversion when the edge selected by bit 27 occurs on MAT0.1 */
#define ADC_CR_START_MAT01 ((4UL<<24))
/** Start conversion when the edge selected by bit 27 occurs on MAT0.3 */
#define ADC_CR_START_MAT03 ((5UL<<24))
/** Start conversion when the edge selected by bit 27 occurs on MAT1.0 */
#define ADC_CR_START_MAT10 ((6UL<<24))
/** Start conversion when the edge selected by bit 27 occurs on MAT1.1 */
#define ADC_CR_START_MAT11 ((7UL<<24))
/** Start conversion on a falling edge on the selected CAP/MAT signal */
#define ADC_CR_EDGE ((1UL<<27))
/*********************************************************************//**
* Macro defines for ADC Global Data register
**********************************************************************/
/** When DONE is 1, this field contains result value of ADC conversion */
#define ADC_GDR_RESULT(n) (((n>>4)&0xFFF))
/** These bits contain the channel from which the LS bits were converted */
#define ADC_GDR_CH(n) (((n>>24)&0x7))
/** This bit is 1 in burst mode if the results of one or
* more conversions was (were) lost */
#define ADC_GDR_OVERRUN_FLAG ((1UL<<30))
/** This bit is set to 1 when an A/D conversion completes */
#define ADC_GDR_DONE_FLAG ((1UL<<31))
/** This bits is used to mask for Channel */
#define ADC_GDR_CH_MASK ((7UL<<24))
/*********************************************************************//**
* Macro defines for ADC Interrupt register
**********************************************************************/
/** These bits allow control over which A/D channels generate
* interrupts for conversion completion */
#define ADC_INTEN_CH(n) ((1UL<<n))
/** When 1, enables the global DONE flag in ADDR to generate an interrupt */
#define ADC_INTEN_GLOBAL ((1UL<<8))
/*********************************************************************//**
* Macro defines for ADC Data register
**********************************************************************/
/** When DONE is 1, this field contains result value of ADC conversion */
#define ADC_DR_RESULT(n) (((n>>4)&0xFFF))
/** These bits mirror the OVERRRUN status flags that appear in the
* result register for each A/D channel */
#define ADC_DR_OVERRUN_FLAG ((1UL<<30))
/** This bit is set to 1 when an A/D conversion completes. It is cleared
* when this register is read */
#define ADC_DR_DONE_FLAG ((1UL<<31))
/*********************************************************************//**
* Macro defines for ADC Status register
**********************************************************************/
/** These bits mirror the DONE status flags that appear in the result
* register for each A/D channel */
#define ADC_STAT_CH_DONE_FLAG(n) ((n&0xFF))
/** These bits mirror the OVERRRUN status flags that appear in the
* result register for each A/D channel */
#define ADC_STAT_CH_OVERRUN_FLAG(n) (((n>>8)&0xFF))
/** This bit is the A/D interrupt flag */
#define ADC_STAT_INT_FLAG ((1UL<<16))
/*********************************************************************//**
* Macro defines for ADC Trim register
**********************************************************************/
/** Offset trim bits for ADC operation */
#define ADC_ADCOFFS(n) (((n&0xF)<<4))
/** Written to boot code*/
#define ADC_TRIM(n) (((n&0xF)<<8))
/* ------------------- CHECK PARAM DEFINITIONS ------------------------- */
/** Check ADC parameter */
#define PARAM_ADCx(n) (((uint32_t *)n)==((uint32_t *)LPC_ADC))
/** Check ADC state parameter */
#define PARAM_ADC_START_ON_EDGE_OPT(OPT) ((OPT == ADC_START_ON_RISING)||(OPT == ADC_START_ON_FALLING))
/** Check ADC state parameter */
#define PARAM_ADC_DATA_STATUS(OPT) ((OPT== ADC_DATA_BURST)||(OPT== ADC_DATA_DONE))
/** Check ADC rate parameter */
#define PARAM_ADC_RATE(rate) ((rate>0)&&(rate<=200000))
/** Check ADC channel selection parameter */
#define PARAM_ADC_CHANNEL_SELECTION(SEL) ((SEL == ADC_CHANNEL_0)||(ADC_CHANNEL_1)\
||(SEL == ADC_CHANNEL_2)|(ADC_CHANNEL_3)\
||(SEL == ADC_CHANNEL_4)||(ADC_CHANNEL_5)\
||(SEL == ADC_CHANNEL_6)||(ADC_CHANNEL_7))
/** Check ADC start option parameter */
#define PARAM_ADC_START_OPT(OPT) ((OPT == ADC_START_CONTINUOUS)||(OPT == ADC_START_NOW)\
||(OPT == ADC_START_ON_EINT0)||(OPT == ADC_START_ON_CAP01)\
||(OPT == ADC_START_ON_MAT01)||(OPT == ADC_START_ON_MAT03)\
||(OPT == ADC_START_ON_MAT10)||(OPT == ADC_START_ON_MAT11))
/** Check ADC interrupt type parameter */
#define PARAM_ADC_TYPE_INT_OPT(OPT) ((OPT == ADC_ADINTEN0)||(OPT == ADC_ADINTEN1)\
||(OPT == ADC_ADINTEN2)||(OPT == ADC_ADINTEN3)\
||(OPT == ADC_ADINTEN4)||(OPT == ADC_ADINTEN5)\
||(OPT == ADC_ADINTEN6)||(OPT == ADC_ADINTEN7)\
||(OPT == ADC_ADGINTEN))
/**
* @}
*/
/* Public Types --------------------------------------------------------------- */
/** @defgroup ADC_Public_Types ADC Public Types
* @{
*/
/*********************************************************************//**
* @brief ADC enumeration
**********************************************************************/
/** @brief Channel Selection */
typedef enum
{
ADC_CHANNEL_0 = 0, /*!< Channel 0 */
ADC_CHANNEL_1, /*!< Channel 1 */
ADC_CHANNEL_2, /*!< Channel 2 */
ADC_CHANNEL_3, /*!< Channel 3 */
ADC_CHANNEL_4, /*!< Channel 4 */
ADC_CHANNEL_5, /*!< Channel 5 */
ADC_CHANNEL_6, /*!< Channel 6 */
ADC_CHANNEL_7 /*!< Channel 7 */
}ADC_CHANNEL_SELECTION;
/** @brief Type of start option */
typedef enum
{
ADC_START_CONTINUOUS =0, /*!< Continuous mode */
ADC_START_NOW, /*!< Start conversion now */
ADC_START_ON_EINT0, /*!< Start conversion when the edge selected
* by bit 27 occurs on P2.10/EINT0 */
ADC_START_ON_CAP01, /*!< Start conversion when the edge selected
* by bit 27 occurs on P1.27/CAP0.1 */
ADC_START_ON_MAT01, /*!< Start conversion when the edge selected
* by bit 27 occurs on MAT0.1 */
ADC_START_ON_MAT03, /*!< Start conversion when the edge selected
* by bit 27 occurs on MAT0.3 */
ADC_START_ON_MAT10, /*!< Start conversion when the edge selected
* by bit 27 occurs on MAT1.0 */
ADC_START_ON_MAT11 /*!< Start conversion when the edge selected
* by bit 27 occurs on MAT1.1 */
} ADC_START_OPT;
/** @brief Type of edge when start conversion on the selected CAP/MAT signal */
typedef enum
{
ADC_START_ON_RISING = 0, /*!< Start conversion on a rising edge
*on the selected CAP/MAT signal */
ADC_START_ON_FALLING /*!< Start conversion on a falling edge
*on the selected CAP/MAT signal */
} ADC_START_ON_EDGE_OPT;
/** @brief* ADC type interrupt enum */
typedef enum
{
ADC_ADINTEN0 = 0, /*!< Interrupt channel 0 */
ADC_ADINTEN1, /*!< Interrupt channel 1 */
ADC_ADINTEN2, /*!< Interrupt channel 2 */
ADC_ADINTEN3, /*!< Interrupt channel 3 */
ADC_ADINTEN4, /*!< Interrupt channel 4 */
ADC_ADINTEN5, /*!< Interrupt channel 5 */
ADC_ADINTEN6, /*!< Interrupt channel 6 */
ADC_ADINTEN7, /*!< Interrupt channel 7 */
ADC_ADGINTEN /*!< Individual channel/global flag done generate an interrupt */
}ADC_TYPE_INT_OPT;
/** @brief ADC Data status */
typedef enum
{
ADC_DATA_BURST = 0, /*Burst bit*/
ADC_DATA_DONE /*Done bit*/
}ADC_DATA_STATUS;
/**
* @}
*/
/* Public Functions ----------------------------------------------------------- */
/** @defgroup ADC_Public_Functions ADC Public Functions
* @{
*/
/* Init/DeInit ADC peripheral ----------------*/
void ADC_Init(LPC_ADC_TypeDef *ADCx, uint32_t rate);
void ADC_DeInit(LPC_ADC_TypeDef *ADCx);
/* Enable/Disable ADC functions --------------*/
void ADC_BurstCmd(LPC_ADC_TypeDef *ADCx, FunctionalState NewState);
void ADC_PowerdownCmd(LPC_ADC_TypeDef *ADCx, FunctionalState NewState);
void ADC_StartCmd(LPC_ADC_TypeDef *ADCx, uint8_t start_mode);
void ADC_ChannelCmd (LPC_ADC_TypeDef *ADCx, uint8_t Channel, FunctionalState NewState);
/* Configure ADC functions -------------------*/
void ADC_EdgeStartConfig(LPC_ADC_TypeDef *ADCx, uint8_t EdgeOption);
void ADC_IntConfig (LPC_ADC_TypeDef *ADCx, ADC_TYPE_INT_OPT IntType, FunctionalState NewState);
/* Get ADC information functions -------------------*/
uint16_t ADC_ChannelGetData(LPC_ADC_TypeDef *ADCx, uint8_t channel);
FlagStatus ADC_ChannelGetStatus(LPC_ADC_TypeDef *ADCx, uint8_t channel, uint32_t StatusType);
uint32_t ADC_GlobalGetData(LPC_ADC_TypeDef *ADCx);
FlagStatus ADC_GlobalGetStatus(LPC_ADC_TypeDef *ADCx, uint32_t StatusType);
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* LPC17XX_ADC_H_ */
/**
* @}
*/
/* --------------------------------- End Of File ------------------------------ */