You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
637 lines
57 KiB
637 lines
57 KiB
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
#pragma once
|
|
|
|
/**
|
|
* Simplified Chinese
|
|
*
|
|
* LCD Menu Messages
|
|
* See also https://marlinfw.org/docs/development/lcd_language.html
|
|
*/
|
|
namespace Language_zh_CN {
|
|
using namespace Language_en; // Inherit undefined strings from English
|
|
|
|
constexpr uint8_t CHARSIZE = 3;
|
|
PROGMEM Language_Str LANGUAGE = _UxGT("简体中文");
|
|
|
|
PROGMEM Language_Str WELCOME_MSG = MACHINE_NAME _UxGT("已就绪."); //" ready."
|
|
PROGMEM Language_Str MSG_MARLIN = _UxGT("马林");
|
|
PROGMEM Language_Str MSG_YES = _UxGT("是");
|
|
PROGMEM Language_Str MSG_NO = _UxGT("否");
|
|
PROGMEM Language_Str MSG_BACK = _UxGT("返回"); // ”Back“
|
|
PROGMEM Language_Str MSG_MEDIA_ABORTING = _UxGT("放弃中...");
|
|
PROGMEM Language_Str MSG_MEDIA_INSERTED = _UxGT("存储卡已插入"); //"Card inserted"
|
|
PROGMEM Language_Str MSG_MEDIA_REMOVED = _UxGT("存储卡被拔出"); //"Card removed"
|
|
PROGMEM Language_Str MSG_MEDIA_WAITING = _UxGT("等待存储器");
|
|
PROGMEM Language_Str MSG_MEDIA_READ_ERROR = _UxGT("存储器读取错误");
|
|
PROGMEM Language_Str MSG_MEDIA_USB_REMOVED = _UxGT("USB设备已弹出");
|
|
PROGMEM Language_Str MSG_MEDIA_USB_FAILED = _UxGT("USB启动错误");
|
|
PROGMEM Language_Str MSG_KILL_SUBCALL_OVERFLOW = _UxGT("子响应溢出");
|
|
PROGMEM Language_Str MSG_LCD_ENDSTOPS = _UxGT("挡块"); //"Endstops" // Max length 8 characters
|
|
PROGMEM Language_Str MSG_LCD_SOFT_ENDSTOPS = _UxGT("软挡块");
|
|
PROGMEM Language_Str MSG_MAIN = _UxGT("主菜单"); //"Main"
|
|
PROGMEM Language_Str MSG_ADVANCED_SETTINGS = _UxGT("高级设置");
|
|
PROGMEM Language_Str MSG_CONFIGURATION = _UxGT("配置");
|
|
PROGMEM Language_Str MSG_AUTOSTART = _UxGT("自动开始"); //"Autostart"
|
|
PROGMEM Language_Str MSG_DISABLE_STEPPERS = _UxGT("关闭步进电机"); //"Disable steppers"
|
|
PROGMEM Language_Str MSG_DEBUG_MENU = _UxGT("调试菜单"); // "Debug Menu"
|
|
PROGMEM Language_Str MSG_PROGRESS_BAR_TEST = _UxGT("进度条测试"); // "Progress Bar Test"
|
|
PROGMEM Language_Str MSG_AUTO_HOME = _UxGT("自动回原点"); //"Auto home"
|
|
PROGMEM Language_Str MSG_AUTO_HOME_X = _UxGT("回X原位"); //"Home X"
|
|
PROGMEM Language_Str MSG_AUTO_HOME_Y = _UxGT("回Y原位"); //"Home Y"
|
|
PROGMEM Language_Str MSG_AUTO_HOME_Z = _UxGT("回Z原位"); //"Home Z"
|
|
PROGMEM Language_Str MSG_AUTO_Z_ALIGN = _UxGT("自动Z对齐");
|
|
PROGMEM Language_Str MSG_LEVEL_BED_HOMING = _UxGT("平台调平XYZ归原位"); //"Homing XYZ"
|
|
PROGMEM Language_Str MSG_LEVEL_BED_WAITING = _UxGT("单击开始热床调平"); //"Click to Begin"
|
|
PROGMEM Language_Str MSG_LEVEL_BED_NEXT_POINT = _UxGT("下个热床调平点"); //"Next Point"
|
|
PROGMEM Language_Str MSG_LEVEL_BED_DONE = _UxGT("完成热床调平"); //"Leveling Done!"
|
|
PROGMEM Language_Str MSG_Z_FADE_HEIGHT = _UxGT("淡出高度"); // "Fade Height"
|
|
PROGMEM Language_Str MSG_SET_HOME_OFFSETS = _UxGT("设置原点偏移"); //"Set home offsets"
|
|
PROGMEM Language_Str MSG_HOME_OFFSETS_APPLIED = _UxGT("偏移已启用"); //"Offsets applied"
|
|
PROGMEM Language_Str MSG_SET_ORIGIN = _UxGT("设置原点"); //"Set origin"
|
|
#if PREHEAT_COUNT
|
|
PROGMEM Language_Str MSG_PREHEAT_1 = _UxGT("预热 ") PREHEAT_1_LABEL; //"Preheat PREHEAT_2_LABEL"
|
|
PROGMEM Language_Str MSG_PREHEAT_1_H = _UxGT("预热 ") PREHEAT_1_LABEL " ~"; //"Preheat PREHEAT_2_LABEL"
|
|
PROGMEM Language_Str MSG_PREHEAT_1_END = _UxGT("预热 ") PREHEAT_1_LABEL _UxGT(" 喷嘴"); //MSG_PREHEAT_1 " "
|
|
PROGMEM Language_Str MSG_PREHEAT_1_END_E = _UxGT("预热 ") PREHEAT_1_LABEL _UxGT(" 喷嘴 ~"); //MSG_PREHEAT_1 " "
|
|
PROGMEM Language_Str MSG_PREHEAT_1_ALL = _UxGT("预热 ") PREHEAT_1_LABEL _UxGT(" 全部"); //MSG_PREHEAT_1 " All"
|
|
PROGMEM Language_Str MSG_PREHEAT_1_BEDONLY = _UxGT("预热 ") PREHEAT_1_LABEL _UxGT(" 热床"); //MSG_PREHEAT_1 " Bed"
|
|
PROGMEM Language_Str MSG_PREHEAT_1_SETTINGS = _UxGT("预热 ") PREHEAT_1_LABEL _UxGT(" 设置"); //MSG_PREHEAT_1 " conf"
|
|
|
|
PROGMEM Language_Str MSG_PREHEAT_M = _UxGT("预热 $"); //"Preheat PREHEAT_2_LABEL"
|
|
PROGMEM Language_Str MSG_PREHEAT_M_H = _UxGT("预热 $ ~"); //"Preheat PREHEAT_2_LABEL"
|
|
PROGMEM Language_Str MSG_PREHEAT_M_END = _UxGT("预热 $ 喷嘴"); //MSG_PREHEAT_1 " "
|
|
PROGMEM Language_Str MSG_PREHEAT_M_END_E = _UxGT("预热 $ 喷嘴 ~"); //MSG_PREHEAT_1 " "
|
|
PROGMEM Language_Str MSG_PREHEAT_M_ALL = _UxGT("预热 $ 全部"); //MSG_PREHEAT_1 " All"
|
|
PROGMEM Language_Str MSG_PREHEAT_M_BEDONLY = _UxGT("预热 $ 热床"); //MSG_PREHEAT_1 " Bed"
|
|
PROGMEM Language_Str MSG_PREHEAT_M_SETTINGS = _UxGT("预热 $ 设置"); //MSG_PREHEAT_1 " conf"
|
|
#endif
|
|
PROGMEM Language_Str MSG_PREHEAT_CUSTOM = _UxGT("预热自定义");
|
|
PROGMEM Language_Str MSG_COOLDOWN = _UxGT("降温"); //"Cooldown"
|
|
PROGMEM Language_Str MSG_CUTTER_FREQUENCY = _UxGT("切割频率");
|
|
PROGMEM Language_Str MSG_LASER_MENU = _UxGT("激光控制");
|
|
PROGMEM Language_Str MSG_LASER_OFF = _UxGT("激光关");
|
|
PROGMEM Language_Str MSG_LASER_ON = _UxGT("激光开");
|
|
PROGMEM Language_Str MSG_LASER_POWER = _UxGT("激光电源");
|
|
PROGMEM Language_Str MSG_SPINDLE_MENU = _UxGT("主轴控制");
|
|
PROGMEM Language_Str MSG_SPINDLE_OFF = _UxGT("主轴关");
|
|
PROGMEM Language_Str MSG_SPINDLE_ON = _UxGT("主轴开");
|
|
PROGMEM Language_Str MSG_SPINDLE_POWER = _UxGT("主轴电源");
|
|
PROGMEM Language_Str MSG_SPINDLE_REVERSE = _UxGT("主轴反转");
|
|
PROGMEM Language_Str MSG_SWITCH_PS_ON = _UxGT("电源打开"); //"Switch power on"
|
|
PROGMEM Language_Str MSG_SWITCH_PS_OFF = _UxGT("电源关闭"); //"Switch power off"
|
|
PROGMEM Language_Str MSG_EXTRUDE = _UxGT("挤出"); //"Extrude"
|
|
PROGMEM Language_Str MSG_RETRACT = _UxGT("回抽"); //"Retract"
|
|
PROGMEM Language_Str MSG_MOVE_AXIS = _UxGT("移动轴"); //"Move axis"
|
|
PROGMEM Language_Str MSG_BED_LEVELING = _UxGT("调平热床"); //"Bed leveling"
|
|
PROGMEM Language_Str MSG_LEVEL_BED = _UxGT("调平热床"); //"Level bed"
|
|
PROGMEM Language_Str MSG_LEVEL_CORNERS = _UxGT("调平边角"); // "Level corners"
|
|
PROGMEM Language_Str MSG_NEXT_CORNER = _UxGT("下个边角"); // "Next corner"
|
|
PROGMEM Language_Str MSG_MESH_EDITOR = _UxGT("网格编辑器");
|
|
PROGMEM Language_Str MSG_EDIT_MESH = _UxGT("编辑网格"); // "Edit Mesh"
|
|
PROGMEM Language_Str MSG_EDITING_STOPPED = _UxGT("网格编辑已停止"); // "Mesh Editing Stopped"
|
|
PROGMEM Language_Str MSG_PROBING_MESH = _UxGT("探测点");
|
|
PROGMEM Language_Str MSG_MESH_X = _UxGT("索引X");
|
|
PROGMEM Language_Str MSG_MESH_Y = _UxGT("索引Y");
|
|
PROGMEM Language_Str MSG_MESH_EDIT_Z = _UxGT("Z 值");
|
|
PROGMEM Language_Str MSG_USER_MENU = _UxGT("定制命令"); // "Custom Commands"
|
|
PROGMEM Language_Str MSG_M48_TEST = _UxGT("M48探测");
|
|
PROGMEM Language_Str MSG_M48_POINT = _UxGT("M48点");
|
|
PROGMEM Language_Str MSG_M48_DEVIATION = _UxGT("M48偏差");
|
|
PROGMEM Language_Str MSG_IDEX_MENU = _UxGT("IDEX模式");
|
|
PROGMEM Language_Str MSG_OFFSETS_MENU = _UxGT("工具偏移量");
|
|
PROGMEM Language_Str MSG_IDEX_MODE_AUTOPARK = _UxGT("自动停靠");
|
|
PROGMEM Language_Str MSG_IDEX_MODE_DUPLICATE = _UxGT("复制");
|
|
PROGMEM Language_Str MSG_IDEX_MODE_MIRRORED_COPY = _UxGT("镜像复制");
|
|
PROGMEM Language_Str MSG_IDEX_MODE_FULL_CTRL = _UxGT("完全控制");
|
|
PROGMEM Language_Str MSG_HOTEND_OFFSET_X = _UxGT("第二喷头是X");
|
|
PROGMEM Language_Str MSG_HOTEND_OFFSET_Y = _UxGT("第二喷头是Y");
|
|
PROGMEM Language_Str MSG_HOTEND_OFFSET_Z = _UxGT("第二喷头是Z");
|
|
PROGMEM Language_Str MSG_UBL_DOING_G29 = _UxGT("执行G29"); // "Doing G29"
|
|
PROGMEM Language_Str MSG_UBL_TOOLS = _UxGT("UBL工具"); // "UBL Tools"
|
|
PROGMEM Language_Str MSG_UBL_LEVEL_BED = _UxGT("统一热床调平(UBL)"); // "Unified Bed Leveling"
|
|
PROGMEM Language_Str MSG_LCD_TILTING_MESH = _UxGT("倾斜點");
|
|
PROGMEM Language_Str MSG_UBL_MANUAL_MESH = _UxGT("手工创设网格"); // "Manually Build Mesh"
|
|
PROGMEM Language_Str MSG_UBL_BC_INSERT = _UxGT("放置垫片并测量"); // "Place shim & measure"
|
|
PROGMEM Language_Str MSG_UBL_BC_INSERT2 = _UxGT("测量"); // "Measure"
|
|
PROGMEM Language_Str MSG_UBL_BC_REMOVE = _UxGT("移除并测量热床"); // "Remove & measure bed"
|
|
PROGMEM Language_Str MSG_UBL_MOVING_TO_NEXT = _UxGT("移动到下一个"); // "Moving to next"
|
|
PROGMEM Language_Str MSG_UBL_ACTIVATE_MESH = _UxGT("激活UBL"); // "Activate UBL"
|
|
PROGMEM Language_Str MSG_UBL_DEACTIVATE_MESH = _UxGT("关闭UBL"); // "Deactivate UBL"
|
|
PROGMEM Language_Str MSG_UBL_SET_TEMP_BED = _UxGT("热床温度"); // "Bed Temp"
|
|
PROGMEM Language_Str MSG_UBL_BED_TEMP_CUSTOM = _UxGT("热床温度");
|
|
PROGMEM Language_Str MSG_UBL_SET_TEMP_HOTEND = _UxGT("热端温度"); // "Hotend Temp"
|
|
PROGMEM Language_Str MSG_UBL_HOTEND_TEMP_CUSTOM = _UxGT("热端温度");
|
|
PROGMEM Language_Str MSG_UBL_MESH_EDIT = _UxGT("网格编辑"); // "Mesh Edit"
|
|
PROGMEM Language_Str MSG_UBL_EDIT_CUSTOM_MESH = _UxGT("编辑客户网格"); // "Edit Custom Mesh"
|
|
PROGMEM Language_Str MSG_UBL_FINE_TUNE_MESH = _UxGT("细调网格"); // "Fine Tuning Mesh"
|
|
PROGMEM Language_Str MSG_UBL_DONE_EDITING_MESH = _UxGT("完成编辑网格"); // "Done Editing Mesh"
|
|
PROGMEM Language_Str MSG_UBL_BUILD_CUSTOM_MESH = _UxGT("创设客户网格"); // "Build Custom Mesh"
|
|
PROGMEM Language_Str MSG_UBL_BUILD_MESH_MENU = _UxGT("创设网格"); // "Build Mesh"
|
|
#if PREHEAT_COUNT
|
|
PROGMEM Language_Str MSG_UBL_BUILD_MESH_M = _UxGT("创设 $ 网格"); // "Build PREHEAT_1_LABEL Mesh"
|
|
PROGMEM Language_Str MSG_UBL_VALIDATE_MESH_M = _UxGT("批准 $ 网格"); // "Validate PREHEAT_1_LABEL Mesh"
|
|
#endif
|
|
PROGMEM Language_Str MSG_UBL_BUILD_COLD_MESH = _UxGT("创设冷网格"); // "Build Cold Mesh"
|
|
PROGMEM Language_Str MSG_UBL_MESH_HEIGHT_ADJUST = _UxGT("调整网格高度"); // "Adjust Mesh Height"
|
|
PROGMEM Language_Str MSG_UBL_MESH_HEIGHT_AMOUNT = _UxGT("高度合计"); // "Height Amount"
|
|
PROGMEM Language_Str MSG_UBL_VALIDATE_MESH_MENU = _UxGT("批准网格"); // "Validate Mesh"
|
|
PROGMEM Language_Str MSG_UBL_VALIDATE_CUSTOM_MESH = _UxGT("批准客户网格"); // "Validate Custom Mesh"
|
|
PROGMEM Language_Str MSG_G26_HEATING_BED = _UxGT("G26加热热床");
|
|
PROGMEM Language_Str MSG_G26_HEATING_NOZZLE = _UxGT("G26加热喷嘴");
|
|
PROGMEM Language_Str MSG_G26_MANUAL_PRIME = _UxGT("手动填装中...");
|
|
PROGMEM Language_Str MSG_G26_FIXED_LENGTH = _UxGT("固定距离填装");
|
|
PROGMEM Language_Str MSG_G26_PRIME_DONE = _UxGT("填装完成");
|
|
PROGMEM Language_Str MSG_G26_CANCELED = _UxGT("G26已取消");
|
|
PROGMEM Language_Str MSG_G26_LEAVING = _UxGT("离开G26");
|
|
PROGMEM Language_Str MSG_UBL_CONTINUE_MESH = _UxGT("继续热床网格"); // "Continue Bed Mesh"
|
|
PROGMEM Language_Str MSG_UBL_MESH_LEVELING = _UxGT("网格调平"); // "Mesh Leveling"
|
|
PROGMEM Language_Str MSG_UBL_3POINT_MESH_LEVELING = _UxGT("三点调平"); // "3-Point Leveling"
|
|
PROGMEM Language_Str MSG_UBL_GRID_MESH_LEVELING = _UxGT("格子网格调平"); // "Grid Mesh Leveling"
|
|
PROGMEM Language_Str MSG_UBL_MESH_LEVEL = _UxGT("调平网格"); // "Level Mesh"
|
|
PROGMEM Language_Str MSG_UBL_SIDE_POINTS = _UxGT("边点"); // "Side Points"
|
|
PROGMEM Language_Str MSG_UBL_MAP_TYPE = _UxGT("图类型"); // "Map Type"
|
|
PROGMEM Language_Str MSG_UBL_OUTPUT_MAP = _UxGT("输出网格图"); // "Output Mesh Map"
|
|
PROGMEM Language_Str MSG_UBL_OUTPUT_MAP_HOST = _UxGT("输出到主机"); // "Output for Host"
|
|
PROGMEM Language_Str MSG_UBL_OUTPUT_MAP_CSV = _UxGT("输出到CSV"); // "Output for CSV"
|
|
PROGMEM Language_Str MSG_UBL_OUTPUT_MAP_BACKUP = _UxGT("输出到备份"); // "Off Printer Backup"
|
|
PROGMEM Language_Str MSG_UBL_INFO_UBL = _UxGT("输出UBL信息"); // "Output UBL Info"
|
|
PROGMEM Language_Str MSG_UBL_FILLIN_AMOUNT = _UxGT("填充合计"); // "Fill-in Amount"
|
|
PROGMEM Language_Str MSG_UBL_MANUAL_FILLIN = _UxGT("手工填充"); // "Manual Fill-in"
|
|
PROGMEM Language_Str MSG_UBL_SMART_FILLIN = _UxGT("聪明填充"); // "Smart Fill-in"
|
|
PROGMEM Language_Str MSG_UBL_FILLIN_MESH = _UxGT("填充网格"); // "Fill-in Mesh"
|
|
PROGMEM Language_Str MSG_UBL_INVALIDATE_ALL = _UxGT("作废所有的"); // "Invalidate All"
|
|
PROGMEM Language_Str MSG_UBL_INVALIDATE_CLOSEST = _UxGT("作废最近的"); // "Invalidate Closest"
|
|
PROGMEM Language_Str MSG_UBL_FINE_TUNE_ALL = _UxGT("细调所有的"); // "Fine Tune All"
|
|
PROGMEM Language_Str MSG_UBL_FINE_TUNE_CLOSEST = _UxGT("细调最近的"); // "Fine Tune Closest"
|
|
PROGMEM Language_Str MSG_UBL_STORAGE_MESH_MENU = _UxGT("网格存储"); // "Mesh Storage"
|
|
PROGMEM Language_Str MSG_UBL_STORAGE_SLOT = _UxGT("存储槽"); // "Memory Slot"
|
|
PROGMEM Language_Str MSG_UBL_LOAD_MESH = _UxGT("装载热床网格"); // "Load Bed Mesh"
|
|
PROGMEM Language_Str MSG_UBL_SAVE_MESH = _UxGT("保存热床网格"); // "Save Bed Mesh"
|
|
PROGMEM Language_Str MSG_MESH_LOADED = _UxGT("网格 %i 已装载"); // "Mesh %i loaded"
|
|
PROGMEM Language_Str MSG_MESH_SAVED = _UxGT("网格 %i 已保存"); // "Mesh %i saved"
|
|
PROGMEM Language_Str MSG_UBL_NO_STORAGE = _UxGT("没有存储"); // "No storage"
|
|
PROGMEM Language_Str MSG_UBL_SAVE_ERROR = _UxGT("错误: UBL保存"); // "Err: UBL Save"
|
|
PROGMEM Language_Str MSG_UBL_RESTORE_ERROR = _UxGT("错误: UBL还原"); // "Err: UBL Restore"
|
|
PROGMEM Language_Str MSG_UBL_Z_OFFSET = _UxGT("Z偏移量: ");
|
|
PROGMEM Language_Str MSG_UBL_Z_OFFSET_STOPPED = _UxGT("Z偏移已停止"); // "Z-Offset Stopped"
|
|
PROGMEM Language_Str MSG_UBL_STEP_BY_STEP_MENU = _UxGT("一步步UBL"); // "Step-By-Step UBL"
|
|
PROGMEM Language_Str MSG_UBL_1_BUILD_COLD_MESH = _UxGT("1. 创设冷网格");
|
|
PROGMEM Language_Str MSG_UBL_2_SMART_FILLIN = _UxGT("2. 聪明填充");
|
|
PROGMEM Language_Str MSG_UBL_3_VALIDATE_MESH_MENU = _UxGT("3. 批准网格");
|
|
PROGMEM Language_Str MSG_UBL_4_FINE_TUNE_ALL = _UxGT("4. 细调所有的");
|
|
PROGMEM Language_Str MSG_UBL_5_VALIDATE_MESH_MENU = _UxGT("5. 批准网格");
|
|
PROGMEM Language_Str MSG_UBL_6_FINE_TUNE_ALL = _UxGT("6. 细调所有的");
|
|
PROGMEM Language_Str MSG_UBL_7_SAVE_MESH = _UxGT("7. 保存热床网格");
|
|
|
|
PROGMEM Language_Str MSG_LED_CONTROL = _UxGT("LED控制"); // "LED Control")
|
|
PROGMEM Language_Str MSG_LEDS = _UxGT("灯"); // "Lights")
|
|
PROGMEM Language_Str MSG_LED_PRESETS = _UxGT("灯预置"); // "Light Presets")
|
|
PROGMEM Language_Str MSG_SET_LEDS_RED = _UxGT("红"); // "Red")
|
|
PROGMEM Language_Str MSG_SET_LEDS_ORANGE = _UxGT("橙"); // "Orange")
|
|
PROGMEM Language_Str MSG_SET_LEDS_YELLOW = _UxGT("黄"); // "Yellow")
|
|
PROGMEM Language_Str MSG_SET_LEDS_GREEN = _UxGT("绿"); // "Green")
|
|
PROGMEM Language_Str MSG_SET_LEDS_BLUE = _UxGT("蓝"); // "Blue")
|
|
PROGMEM Language_Str MSG_SET_LEDS_INDIGO = _UxGT("青"); // "Indigo")
|
|
PROGMEM Language_Str MSG_SET_LEDS_VIOLET = _UxGT("紫"); // "Violet")
|
|
PROGMEM Language_Str MSG_SET_LEDS_WHITE = _UxGT("白"); // "White")
|
|
PROGMEM Language_Str MSG_SET_LEDS_DEFAULT = _UxGT("缺省"); // "Default")
|
|
PROGMEM Language_Str MSG_CUSTOM_LEDS = _UxGT("定制灯"); // "Custom Lights")
|
|
PROGMEM Language_Str MSG_INTENSITY_R = _UxGT("红饱和度"); // "Red Intensity")
|
|
PROGMEM Language_Str MSG_INTENSITY_G = _UxGT("绿饱和度"); // "Green Intensity")
|
|
PROGMEM Language_Str MSG_INTENSITY_B = _UxGT("蓝饱和度"); // "Blue Intensity")
|
|
PROGMEM Language_Str MSG_INTENSITY_W = _UxGT("白饱和度"); // "White Intensity")
|
|
PROGMEM Language_Str MSG_LED_BRIGHTNESS = _UxGT("亮度"); // "Brightness")
|
|
|
|
PROGMEM Language_Str MSG_MOVING = _UxGT("移动..."); // "Moving...")
|
|
PROGMEM Language_Str MSG_FREE_XY = _UxGT("释放 XY"); // "Free XY")
|
|
PROGMEM Language_Str MSG_MOVE_X = _UxGT("移动X"); //"Move X"
|
|
PROGMEM Language_Str MSG_MOVE_Y = _UxGT("移动Y"); //"Move Y"
|
|
PROGMEM Language_Str MSG_MOVE_Z = _UxGT("移动Z"); //"Move Z"
|
|
PROGMEM Language_Str MSG_MOVE_E = _UxGT("挤出机"); //"Extruder"
|
|
PROGMEM Language_Str MSG_MOVE_EN = _UxGT("挤出机 *"); //"Extruder"
|
|
PROGMEM Language_Str MSG_HOTEND_TOO_COLD = _UxGT("热端太冷");
|
|
PROGMEM Language_Str MSG_MOVE_Z_DIST = _UxGT("移动 %s mm"); //"Move 0.025mm"
|
|
PROGMEM Language_Str MSG_MOVE_01MM = _UxGT("移动 0.1 mm"); //"Move 0.1mm"
|
|
PROGMEM Language_Str MSG_MOVE_1MM = _UxGT("移动 1 mm"); //"Move 1mm"
|
|
PROGMEM Language_Str MSG_MOVE_10MM = _UxGT("移动 10 mm"); //"Move 10mm"
|
|
PROGMEM Language_Str MSG_SPEED = _UxGT("速率"); //"Speed"
|
|
PROGMEM Language_Str MSG_BED_Z = _UxGT("热床Z"); //"Bed Z"
|
|
PROGMEM Language_Str MSG_NOZZLE = _UxGT("喷嘴"); //"Nozzle" 噴嘴
|
|
PROGMEM Language_Str MSG_NOZZLE_N = _UxGT("喷嘴 ~"); //"Nozzle" 噴嘴
|
|
PROGMEM Language_Str MSG_NOZZLE_PARKED = _UxGT("喷嘴已停靠");
|
|
PROGMEM Language_Str MSG_NOZZLE_STANDBY = _UxGT("喷嘴待命中");
|
|
PROGMEM Language_Str MSG_BED = _UxGT("热床"); //"Bed"
|
|
PROGMEM Language_Str MSG_CHAMBER = _UxGT("机箱壳");
|
|
PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("风扇速率"); //"Fan speed"
|
|
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("风扇速率 ~"); //"Fan speed"
|
|
PROGMEM Language_Str MSG_STORED_FAN_N = _UxGT("存储的风扇 ~");
|
|
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED = _UxGT("额外风扇速率"); // "Extra fan speed"
|
|
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("额外风扇速率 ~"); // "Extra fan speed"
|
|
PROGMEM Language_Str MSG_CONTROLLER_FAN = _UxGT("控制器风扇");
|
|
PROGMEM Language_Str MSG_CONTROLLER_FAN_IDLE_SPEED = _UxGT("空闲速度");
|
|
PROGMEM Language_Str MSG_CONTROLLER_FAN_AUTO_ON = _UxGT("自动模式");
|
|
PROGMEM Language_Str MSG_CONTROLLER_FAN_SPEED = _UxGT("工作速度");
|
|
PROGMEM Language_Str MSG_CONTROLLER_FAN_DURATION = _UxGT("空闲周期");
|
|
PROGMEM Language_Str MSG_FLOW = _UxGT("挤出速率"); //"Flow"
|
|
PROGMEM Language_Str MSG_FLOW_N = _UxGT("挤出速率 ~"); //"Flow"
|
|
PROGMEM Language_Str MSG_CONTROL = _UxGT("控制"); //"Control"
|
|
PROGMEM Language_Str MSG_MIN = " " LCD_STR_THERMOMETER _UxGT(" 最小"); //" " LCD_STR_THERMOMETER " Min"
|
|
PROGMEM Language_Str MSG_MAX = " " LCD_STR_THERMOMETER _UxGT(" 最大"); //" " LCD_STR_THERMOMETER " Max"
|
|
PROGMEM Language_Str MSG_FACTOR = " " LCD_STR_THERMOMETER _UxGT(" 因数"); //" " LCD_STR_THERMOMETER " Fact"
|
|
PROGMEM Language_Str MSG_AUTOTEMP = _UxGT("自动控温"); //"Autotemp"
|
|
PROGMEM Language_Str MSG_LCD_ON = _UxGT("开"); //"On"
|
|
PROGMEM Language_Str MSG_LCD_OFF = _UxGT("关"); //"Off"
|
|
PROGMEM Language_Str MSG_PID_AUTOTUNE = _UxGT("自动PID");
|
|
PROGMEM Language_Str MSG_PID_AUTOTUNE_E = _UxGT("自动PID *");
|
|
PROGMEM Language_Str MSG_PID_AUTOTUNE_DONE = _UxGT("PID调整完成");
|
|
PROGMEM Language_Str MSG_PID_BAD_EXTRUDER_NUM = _UxGT("自动调失败. 坏的挤出机");
|
|
PROGMEM Language_Str MSG_PID_TEMP_TOO_HIGH = _UxGT("自动调失败. 温度太高");
|
|
PROGMEM Language_Str MSG_PID_TIMEOUT = _UxGT("自动调失败! 超时");
|
|
PROGMEM Language_Str MSG_PID_P = _UxGT("PID-P");
|
|
PROGMEM Language_Str MSG_PID_P_E = _UxGT("PID-P *");
|
|
PROGMEM Language_Str MSG_PID_I = _UxGT("PID-I");
|
|
PROGMEM Language_Str MSG_PID_I_E = _UxGT("PID-I *");
|
|
PROGMEM Language_Str MSG_PID_D = _UxGT("PID-D");
|
|
PROGMEM Language_Str MSG_PID_D_E = _UxGT("PID-D *");
|
|
PROGMEM Language_Str MSG_PID_C = _UxGT("PID-C");
|
|
PROGMEM Language_Str MSG_PID_C_E = _UxGT("PID-C *");
|
|
PROGMEM Language_Str MSG_PID_F = _UxGT("PID-F");
|
|
PROGMEM Language_Str MSG_PID_F_E = _UxGT("PID-F *");
|
|
PROGMEM Language_Str MSG_SELECT = _UxGT("选择"); //"Select"
|
|
PROGMEM Language_Str MSG_SELECT_E = _UxGT("选择 *");
|
|
PROGMEM Language_Str MSG_ACC = _UxGT("加速度"); //"Accel" acceleration
|
|
PROGMEM Language_Str MSG_JERK = _UxGT("抖动速率"); // "Jerk"
|
|
PROGMEM Language_Str MSG_VA_JERK = _UxGT("轴抖动速率") LCD_STR_A; //"Va-jerk"
|
|
PROGMEM Language_Str MSG_VB_JERK = _UxGT("轴抖动速率") LCD_STR_B; //"Vb-jerk"
|
|
PROGMEM Language_Str MSG_VC_JERK = _UxGT("轴抖动速率") LCD_STR_C; //"Vc-jerk"
|
|
PROGMEM Language_Str MSG_VE_JERK = _UxGT("挤出机抖动速率"); //"Ve-jerk"
|
|
PROGMEM Language_Str MSG_JUNCTION_DEVIATION = _UxGT("接点差");
|
|
PROGMEM Language_Str MSG_VELOCITY = _UxGT("速度"); // "Velocity"
|
|
PROGMEM Language_Str MSG_VMAX_A = _UxGT("最大进料速率") LCD_STR_A; //"Vmax " max_feedrate_mm_s
|
|
PROGMEM Language_Str MSG_VMAX_B = _UxGT("最大进料速率") LCD_STR_B; //"Vmax " max_feedrate_mm_s
|
|
PROGMEM Language_Str MSG_VMAX_C = _UxGT("最大进料速率") LCD_STR_C; //"Vmax " max_feedrate_mm_s
|
|
PROGMEM Language_Str MSG_VMAX_E = _UxGT("最大进料速率") LCD_STR_E; //"Vmax " max_feedrate_mm_s
|
|
PROGMEM Language_Str MSG_VMAX_EN = _UxGT("最大进料速率 *"); //"Vmax " max_feedrate_mm_s
|
|
PROGMEM Language_Str MSG_VMIN = _UxGT("最小进料速率"); //"Vmin" min_feedrate_mm_s
|
|
PROGMEM Language_Str MSG_VTRAV_MIN = _UxGT("最小移动速率"); //"VTrav min" min_travel_feedrate_mm_s, (target) speed of the move
|
|
PROGMEM Language_Str MSG_ACCELERATION = _UxGT("加速度"); // "Acceleration"
|
|
PROGMEM Language_Str MSG_AMAX_A = _UxGT("最大打印加速度") LCD_STR_A; //"Amax " max_acceleration_mm_per_s2, acceleration in units/s^2 for print moves
|
|
PROGMEM Language_Str MSG_AMAX_B = _UxGT("最大打印加速度") LCD_STR_B; //"Amax " max_acceleration_mm_per_s2, acceleration in units/s^2 for print moves
|
|
PROGMEM Language_Str MSG_AMAX_C = _UxGT("最大打印加速度") LCD_STR_C; //"Amax " max_acceleration_mm_per_s2, acceleration in units/s^2 for print moves
|
|
PROGMEM Language_Str MSG_AMAX_E = _UxGT("最大打印加速度") LCD_STR_E; //"Amax " max_acceleration_mm_per_s2, acceleration in units/s^2 for print moves
|
|
PROGMEM Language_Str MSG_AMAX_EN = _UxGT("最大打印加速度 *"); //"Amax " max_acceleration_mm_per_s2, acceleration in units/s^2 for print moves
|
|
PROGMEM Language_Str MSG_A_RETRACT = _UxGT("收进加速度"); //"A-retract" retract_acceleration, E acceleration in mm/s^2 for retracts
|
|
PROGMEM Language_Str MSG_A_TRAVEL = _UxGT("非打印移动加速度"); //"A-travel" travel_acceleration, X, Y, Z acceleration in mm/s^2 for travel (non printing) moves
|
|
PROGMEM Language_Str MSG_XY_FREQUENCY_LIMIT = _UxGT("频率最大");
|
|
PROGMEM Language_Str MSG_XY_FREQUENCY_FEEDRATE = _UxGT("进给速度");
|
|
PROGMEM Language_Str MSG_STEPS_PER_MM = _UxGT("轴步数/mm"); //"Steps/mm" axis_steps_per_mm, axis steps-per-unit G92
|
|
PROGMEM Language_Str MSG_A_STEPS = LCD_STR_A _UxGT("步数/mm"); //"Asteps/mm"
|
|
PROGMEM Language_Str MSG_B_STEPS = LCD_STR_B _UxGT("步数/mm"); //"Bsteps/mm"
|
|
PROGMEM Language_Str MSG_C_STEPS = LCD_STR_C _UxGT("步数/mm"); //"Csteps/mm"
|
|
PROGMEM Language_Str MSG_E_STEPS = _UxGT("E 步数/mm"); //"Esteps/mm"
|
|
PROGMEM Language_Str MSG_EN_STEPS = _UxGT("* 步数/mm");
|
|
PROGMEM Language_Str MSG_TEMPERATURE = _UxGT("温度"); //"Temperature"
|
|
PROGMEM Language_Str MSG_MOTION = _UxGT("运动"); //"Motion"
|
|
PROGMEM Language_Str MSG_FILAMENT = _UxGT("料丝"); //"Filament" menu_advanced_filament
|
|
PROGMEM Language_Str MSG_VOLUMETRIC_ENABLED = _UxGT("E 在 mm³"); //"E in mm3" volumetric_enabled
|
|
PROGMEM Language_Str MSG_VOLUMETRIC_LIMIT = _UxGT("E 限制 在 mm³");
|
|
PROGMEM Language_Str MSG_VOLUMETRIC_LIMIT_E = _UxGT("E 限制 *");
|
|
PROGMEM Language_Str MSG_FILAMENT_DIAM = _UxGT("丝料直径"); //"Fil. Dia."
|
|
PROGMEM Language_Str MSG_FILAMENT_DIAM_E = _UxGT("丝料直径 *");
|
|
PROGMEM Language_Str MSG_FILAMENT_UNLOAD = _UxGT("卸载 mm"); // "Unload mm"
|
|
PROGMEM Language_Str MSG_FILAMENT_LOAD = _UxGT("装载 mm"); // "Load mm"
|
|
PROGMEM Language_Str MSG_ADVANCE_K = _UxGT("Advance K");
|
|
PROGMEM Language_Str MSG_ADVANCE_K_E = _UxGT("Advance K *");
|
|
PROGMEM Language_Str MSG_CONTRAST = _UxGT("LCD对比度"); //"LCD contrast"
|
|
PROGMEM Language_Str MSG_STORE_EEPROM = _UxGT("保存设置"); //"Store memory"
|
|
PROGMEM Language_Str MSG_LOAD_EEPROM = _UxGT("装载设置"); //"Load memory"
|
|
PROGMEM Language_Str MSG_RESTORE_DEFAULTS = _UxGT("恢复安全值"); //"Restore Defaults"
|
|
PROGMEM Language_Str MSG_INIT_EEPROM = _UxGT("初始化设置"); // "Initialize EEPROM"
|
|
PROGMEM Language_Str MSG_ERR_EEPROM_CRC = _UxGT("EEPROM CRC 错误");
|
|
PROGMEM Language_Str MSG_ERR_EEPROM_INDEX = _UxGT("EEPROM Index 错误");
|
|
PROGMEM Language_Str MSG_ERR_EEPROM_VERSION = _UxGT("EEPROM Version 错误");
|
|
PROGMEM Language_Str MSG_SETTINGS_STORED = _UxGT("设置已保存");
|
|
PROGMEM Language_Str MSG_MEDIA_UPDATE = _UxGT("存储器更新");
|
|
PROGMEM Language_Str MSG_RESET_PRINTER = _UxGT("复位打印机");
|
|
PROGMEM Language_Str MSG_REFRESH = LCD_STR_REFRESH _UxGT("刷新");
|
|
PROGMEM Language_Str MSG_INFO_SCREEN = _UxGT("信息屏"); //"Info screen"
|
|
PROGMEM Language_Str MSG_PREPARE = _UxGT("准备"); //"Prepare"
|
|
PROGMEM Language_Str MSG_TUNE = _UxGT("调整"); //"Tune"
|
|
PROGMEM Language_Str MSG_POWER_MONITOR = _UxGT("电源监控");
|
|
PROGMEM Language_Str MSG_CURRENT = _UxGT("电流");
|
|
PROGMEM Language_Str MSG_VOLTAGE = _UxGT("电压");
|
|
PROGMEM Language_Str MSG_POWER = _UxGT("功率");
|
|
PROGMEM Language_Str MSG_START_PRINT = _UxGT("开始打印");
|
|
PROGMEM Language_Str MSG_BUTTON_NEXT = _UxGT("下一个");
|
|
PROGMEM Language_Str MSG_BUTTON_INIT = _UxGT("初始");
|
|
PROGMEM Language_Str MSG_BUTTON_STOP = _UxGT("停止");
|
|
PROGMEM Language_Str MSG_BUTTON_PRINT = _UxGT("打印");
|
|
PROGMEM Language_Str MSG_BUTTON_RESET = _UxGT("复位");
|
|
PROGMEM Language_Str MSG_BUTTON_IGNORE = _UxGT("忽略");
|
|
PROGMEM Language_Str MSG_BUTTON_CANCEL = _UxGT("取消");
|
|
PROGMEM Language_Str MSG_BUTTON_DONE = _UxGT("完成");
|
|
PROGMEM Language_Str MSG_BUTTON_BACK = _UxGT("返回");
|
|
PROGMEM Language_Str MSG_BUTTON_PROCEED = _UxGT("继续");
|
|
PROGMEM Language_Str MSG_PAUSING = _UxGT("暂停中...");
|
|
PROGMEM Language_Str MSG_PAUSE_PRINT = _UxGT("暂停打印"); //"Pause print"
|
|
PROGMEM Language_Str MSG_RESUME_PRINT = _UxGT("恢复打印"); //"Resume print"
|
|
PROGMEM Language_Str MSG_STOP_PRINT = _UxGT("停止打印"); //"Stop print"
|
|
PROGMEM Language_Str MSG_PRINTING_OBJECT = _UxGT("打印物体");
|
|
PROGMEM Language_Str MSG_CANCEL_OBJECT = _UxGT("取消物体");
|
|
PROGMEM Language_Str MSG_CANCEL_OBJECT_N = _UxGT("取消物体 =");
|
|
PROGMEM Language_Str MSG_OUTAGE_RECOVERY = _UxGT("中断恢复");
|
|
PROGMEM Language_Str MSG_MEDIA_MENU = _UxGT("从存储卡上打印"); //"Print from SD"
|
|
PROGMEM Language_Str MSG_NO_MEDIA = _UxGT("无存储卡"); //"No SD card"
|
|
PROGMEM Language_Str MSG_DWELL = _UxGT("休眠中 ..."); //"Sleep..."
|
|
PROGMEM Language_Str MSG_USERWAIT = _UxGT("点击继续 ..."); //"Click to resume..."
|
|
PROGMEM Language_Str MSG_PRINT_PAUSED = _UxGT("暫停打印"); // "Print paused"
|
|
PROGMEM Language_Str MSG_PRINTING = _UxGT("打印中...");
|
|
PROGMEM Language_Str MSG_PRINT_ABORTED = _UxGT("已取消打印"); //"Print aborted"
|
|
PROGMEM Language_Str MSG_PRINT_DONE = _UxGT("打印已完成");
|
|
PROGMEM Language_Str MSG_NO_MOVE = _UxGT("无移动"); //"No move."
|
|
PROGMEM Language_Str MSG_KILLED = _UxGT("已杀掉"); //"KILLED. "
|
|
PROGMEM Language_Str MSG_STOPPED = _UxGT("已停止"); //"STOPPED. "
|
|
PROGMEM Language_Str MSG_CONTROL_RETRACT = _UxGT("回抽长度mm"); //"Retract mm" retract_length, retract length (positive mm)
|
|
PROGMEM Language_Str MSG_CONTROL_RETRACT_SWAP = _UxGT("换手回抽长度mm"); //"Swap Re.mm" swap_retract_length, swap retract length (positive mm), for extruder change
|
|
PROGMEM Language_Str MSG_CONTROL_RETRACTF = _UxGT("回抽速率mm/s"); //"Retract V" retract_feedrate_mm_s, feedrate for retracting (mm/s)
|
|
PROGMEM Language_Str MSG_CONTROL_RETRACT_ZHOP = _UxGT("Hop mm"); //"Hop mm" retract_zraise, retract Z-lift
|
|
PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVER = _UxGT("回抽恢复长度mm"); //"UnRet +mm" retract_recover_extra, additional recover length (mm, added to retract length when recovering)
|
|
PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVER_SWAP = _UxGT("换手回抽恢复长度mm"); //"S UnRet+mm" swap_retract_recover_extra, additional swap recover length (mm, added to retract length when recovering from extruder change)
|
|
PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVERF = _UxGT("回抽恢复后进料速率mm/s"); //"Unretract V" retract_recover_feedrate_mm_s, feedrate for recovering from retraction (mm/s)
|
|
PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVER_SWAPF = _UxGT("S UnRet V"); // "S UnRet V"
|
|
PROGMEM Language_Str MSG_AUTORETRACT = _UxGT("自动抽回"); //"Auto-Retract" autoretract_enabled,
|
|
PROGMEM Language_Str MSG_FILAMENT_SWAP_LENGTH = _UxGT("交换长度");
|
|
PROGMEM Language_Str MSG_FILAMENT_SWAP_EXTRA = _UxGT("额外的交换");
|
|
PROGMEM Language_Str MSG_FILAMENT_PURGE_LENGTH = _UxGT("清洗长度");
|
|
PROGMEM Language_Str MSG_TOOL_CHANGE = _UxGT("换工具");
|
|
PROGMEM Language_Str MSG_TOOL_CHANGE_ZLIFT = _UxGT("Z抬起");
|
|
PROGMEM Language_Str MSG_SINGLENOZZLE_PRIME_SPEED = _UxGT("进给速度");
|
|
PROGMEM Language_Str MSG_SINGLENOZZLE_RETRACT_SPEED = _UxGT("回抽速度");
|
|
PROGMEM Language_Str MSG_FILAMENT_PARK_ENABLED = _UxGT("停靠头");
|
|
PROGMEM Language_Str MSG_SINGLENOZZLE_UNRETRACT_SPEED = _UxGT("恢复速度");
|
|
PROGMEM Language_Str MSG_SINGLENOZZLE_FAN_SPEED = _UxGT("风扇速度");
|
|
PROGMEM Language_Str MSG_SINGLENOZZLE_FAN_TIME = _UxGT("风扇时间");
|
|
PROGMEM Language_Str MSG_TOOL_MIGRATION_ON = _UxGT("自动开");
|
|
PROGMEM Language_Str MSG_TOOL_MIGRATION_OFF = _UxGT("自动关");
|
|
PROGMEM Language_Str MSG_TOOL_MIGRATION = _UxGT("工具迁移");
|
|
PROGMEM Language_Str MSG_TOOL_MIGRATION_AUTO = _UxGT("自动迁移");
|
|
PROGMEM Language_Str MSG_TOOL_MIGRATION_END = _UxGT("上一个挤出机");
|
|
PROGMEM Language_Str MSG_TOOL_MIGRATION_SWAP = _UxGT("迁移至 *");
|
|
PROGMEM Language_Str MSG_FILAMENTCHANGE = _UxGT("更换丝料"); //"Change filament"
|
|
PROGMEM Language_Str MSG_FILAMENTCHANGE_E = _UxGT("更换丝料 *"); //"Change filament"
|
|
PROGMEM Language_Str MSG_FILAMENTLOAD = _UxGT("装载丝料"); // "Load filament"
|
|
PROGMEM Language_Str MSG_FILAMENTLOAD_E = _UxGT("装载丝料 *"); // "Load filament"
|
|
PROGMEM Language_Str MSG_FILAMENTUNLOAD = _UxGT("卸载丝料"); // "Unload filament"
|
|
PROGMEM Language_Str MSG_FILAMENTUNLOAD_E = _UxGT("卸载丝料 *"); // "Unload filament"
|
|
PROGMEM Language_Str MSG_FILAMENTUNLOAD_ALL = _UxGT("卸载全部"); // "Unload All"
|
|
PROGMEM Language_Str MSG_ATTACH_MEDIA = _UxGT("初始化存储卡"); //"Init. SD card"
|
|
PROGMEM Language_Str MSG_CHANGE_MEDIA = _UxGT("更换存储卡"); //"Change SD card"
|
|
PROGMEM Language_Str MSG_RELEASE_MEDIA = _UxGT("释放存储卡");
|
|
PROGMEM Language_Str MSG_ZPROBE_OUT = _UxGT("Z探针在热床之外"); //"Z probe out. bed" Z probe is not within the physical limits
|
|
PROGMEM Language_Str MSG_SKEW_FACTOR = _UxGT("偏斜因数"); // "Skew Factor"
|
|
PROGMEM Language_Str MSG_BLTOUCH = _UxGT("BLTouch"); // "BLTouch"
|
|
PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("自检");
|
|
PROGMEM Language_Str MSG_BLTOUCH_RESET = _UxGT("重置");
|
|
PROGMEM Language_Str MSG_BLTOUCH_STOW = _UxGT("装载");
|
|
PROGMEM Language_Str MSG_BLTOUCH_DEPLOY = _UxGT("部署");
|
|
PROGMEM Language_Str MSG_BLTOUCH_SW_MODE = _UxGT("SW模式");
|
|
PROGMEM Language_Str MSG_BLTOUCH_5V_MODE = _UxGT("5V模式");
|
|
PROGMEM Language_Str MSG_BLTOUCH_OD_MODE = _UxGT("OD模式");
|
|
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE = _UxGT("模式保存");
|
|
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_5V = _UxGT("设置BLTouch为5V");
|
|
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_OD = _UxGT("设置BLTouch为OD");
|
|
PROGMEM Language_Str MSG_BLTOUCH_MODE_ECHO = _UxGT("报告开漏");
|
|
PROGMEM Language_Str MSG_BLTOUCH_MODE_CHANGE = _UxGT("危险: 错误的设置将引起损坏! 是否继续?");
|
|
PROGMEM Language_Str MSG_TOUCHMI_PROBE = _UxGT("TouchMI");
|
|
PROGMEM Language_Str MSG_TOUCHMI_INIT = _UxGT("初始化TouchMI");
|
|
PROGMEM Language_Str MSG_TOUCHMI_ZTEST = _UxGT("Z偏移量测试");
|
|
PROGMEM Language_Str MSG_TOUCHMI_SAVE = _UxGT("保存");
|
|
PROGMEM Language_Str MSG_MANUAL_DEPLOY_TOUCHMI = _UxGT("部署TouchMI");
|
|
PROGMEM Language_Str MSG_MANUAL_DEPLOY = _UxGT("部署Z探针");
|
|
PROGMEM Language_Str MSG_MANUAL_STOW = _UxGT("收好Z探针");
|
|
PROGMEM Language_Str MSG_HOME_FIRST = _UxGT("归位 %s%s%s 先"); //"Home ... first"
|
|
PROGMEM Language_Str MSG_ZPROBE_OFFSETS = _UxGT("探针偏移量");
|
|
PROGMEM Language_Str MSG_ZPROBE_XOFFSET = _UxGT("探针X偏移");
|
|
PROGMEM Language_Str MSG_ZPROBE_YOFFSET = _UxGT("探针Y偏移");
|
|
PROGMEM Language_Str MSG_ZPROBE_ZOFFSET = _UxGT("探针Z偏移"); //"Z Offset"
|
|
PROGMEM Language_Str MSG_BABYSTEP_X = _UxGT("微量调整X轴"); //"Babystep X" lcd_babystep_x, Babystepping enables the user to control the axis in tiny amounts
|
|
PROGMEM Language_Str MSG_BABYSTEP_Y = _UxGT("微量调整Y轴"); //"Babystep Y"
|
|
PROGMEM Language_Str MSG_BABYSTEP_Z = _UxGT("微量调整Z轴"); //"Babystep Z"
|
|
PROGMEM Language_Str MSG_BABYSTEP_TOTAL = _UxGT("总计");
|
|
PROGMEM Language_Str MSG_ENDSTOP_ABORT = _UxGT("挡块终止"); //"Endstop abort"
|
|
PROGMEM Language_Str MSG_HEATING_FAILED_LCD = _UxGT("加热失败"); //"Heating failed"
|
|
PROGMEM Language_Str MSG_ERR_REDUNDANT_TEMP = _UxGT("错误：冗余温度"); //"Err: REDUNDANT TEMP"
|
|
PROGMEM Language_Str MSG_THERMAL_RUNAWAY = _UxGT("温控失控"); //"THERMAL RUNAWAY"
|
|
PROGMEM Language_Str MSG_THERMAL_RUNAWAY_BED = _UxGT("热床热量失控");
|
|
PROGMEM Language_Str MSG_THERMAL_RUNAWAY_CHAMBER = _UxGT("机箱热量失控");
|
|
PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("错误：最高温度"); //"Err: MAXTEMP"
|
|
PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("错误：最低温度"); //"Err: MINTEMP"
|
|
PROGMEM Language_Str MSG_HALTED = _UxGT("打印停机"); //"PRINTER HALTED"
|
|
PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("请重置"); //"Please reset"
|
|
PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("天"); //"d" // One character only
|
|
PROGMEM Language_Str MSG_SHORT_HOUR = _UxGT("时"); //"h" // One character only
|
|
PROGMEM Language_Str MSG_SHORT_MINUTE = _UxGT("分"); //"m" // One character only
|
|
PROGMEM Language_Str MSG_HEATING = _UxGT("加热中 ..."); //"Heating..."
|
|
PROGMEM Language_Str MSG_COOLING = _UxGT("冷却中 ...");
|
|
PROGMEM Language_Str MSG_BED_HEATING = _UxGT("加热热床中 ..."); //"Bed Heating..."
|
|
PROGMEM Language_Str MSG_BED_COOLING = _UxGT("热床冷却中 ...");
|
|
PROGMEM Language_Str MSG_CHAMBER_HEATING = _UxGT("机箱加热中 ...");
|
|
PROGMEM Language_Str MSG_CHAMBER_COOLING = _UxGT("机箱冷却中 ...");
|
|
PROGMEM Language_Str MSG_DELTA_CALIBRATE = _UxGT("⊿校准"); //"Delta Calibration"
|
|
PROGMEM Language_Str MSG_DELTA_CALIBRATE_X = _UxGT("⊿校准X"); //"Calibrate X"
|
|
PROGMEM Language_Str MSG_DELTA_CALIBRATE_Y = _UxGT("⊿校准Y"); //"Calibrate Y"
|
|
PROGMEM Language_Str MSG_DELTA_CALIBRATE_Z = _UxGT("⊿校准Z"); //"Calibrate Z"
|
|
PROGMEM Language_Str MSG_DELTA_CALIBRATE_CENTER = _UxGT("⊿校准中心"); //"Calibrate Center"
|
|
PROGMEM Language_Str MSG_DELTA_SETTINGS = _UxGT("⊿设置"); // "Delta Settings"
|
|
PROGMEM Language_Str MSG_DELTA_AUTO_CALIBRATE = _UxGT("⊿自动校准"); // "Auto Calibration"
|
|
PROGMEM Language_Str MSG_DELTA_HEIGHT_CALIBRATE = _UxGT("设置⊿高度"); // "Set Delta Height"
|
|
PROGMEM Language_Str MSG_DELTA_Z_OFFSET_CALIBRATE = _UxGT("探针Z偏移量");
|
|
PROGMEM Language_Str MSG_DELTA_DIAG_ROD = _UxGT("⊿斜柱"); // "Diag Rod"
|
|
PROGMEM Language_Str MSG_DELTA_HEIGHT = _UxGT("⊿高度"); // "Height"
|
|
PROGMEM Language_Str MSG_DELTA_RADIUS = _UxGT("⊿半径"); // "Radius"
|
|
PROGMEM Language_Str MSG_INFO_MENU = _UxGT("关于打印机"); //"About Printer"
|
|
PROGMEM Language_Str MSG_INFO_PRINTER_MENU = _UxGT("打印机信息"); //"Printer Info"
|
|
PROGMEM Language_Str MSG_3POINT_LEVELING = _UxGT("三点调平"); // "3-Point Leveling"
|
|
PROGMEM Language_Str MSG_LINEAR_LEVELING = _UxGT("线性调平"); // "Linear Leveling"
|
|
PROGMEM Language_Str MSG_BILINEAR_LEVELING = _UxGT("双线性调平"); // "Bilinear Leveling"
|
|
PROGMEM Language_Str MSG_UBL_LEVELING = _UxGT("统一热床调平(UBL)"); // "Unified Bed Leveling"
|
|
PROGMEM Language_Str MSG_MESH_LEVELING = _UxGT("网格调平"); // "Mesh Leveling"
|
|
PROGMEM Language_Str MSG_INFO_STATS_MENU = _UxGT("打印机统计"); //"Printer Stats"
|
|
PROGMEM Language_Str MSG_INFO_BOARD_MENU = _UxGT("主板信息"); //"Board Info"
|
|
PROGMEM Language_Str MSG_INFO_THERMISTOR_MENU = _UxGT("温度计"); //"Thermistors"
|
|
PROGMEM Language_Str MSG_INFO_EXTRUDERS = _UxGT("挤出机"); //"Extruders"
|
|
PROGMEM Language_Str MSG_INFO_BAUDRATE = _UxGT("波特率"); //"Baud"
|
|
PROGMEM Language_Str MSG_INFO_PROTOCOL = _UxGT("协议"); //"Protocol"
|
|
PROGMEM Language_Str MSG_INFO_RUNAWAY_OFF = _UxGT("监控温度失控:关");
|
|
PROGMEM Language_Str MSG_INFO_RUNAWAY_ON = _UxGT("监控温度失控:开");
|
|
PROGMEM Language_Str MSG_HOTEND_IDLE_TIMEOUT = _UxGT("热端空闲超时");
|
|
|
|
PROGMEM Language_Str MSG_CASE_LIGHT = _UxGT("外壳灯"); // "Case light"
|
|
PROGMEM Language_Str MSG_CASE_LIGHT_BRIGHTNESS = _UxGT("灯亮度"); // "Light BRIGHTNESS"
|
|
|
|
PROGMEM Language_Str MSG_KILL_EXPECTED_PRINTER = _UxGT("打印机不正确"); // "The printer is incorrect"
|
|
|
|
#if LCD_WIDTH >= 20
|
|
PROGMEM Language_Str MSG_INFO_PRINT_COUNT = _UxGT("打印计数"); //"Print Count"
|
|
PROGMEM Language_Str MSG_INFO_COMPLETED_PRINTS = _UxGT("完成了"); //"Completed"
|
|
PROGMEM Language_Str MSG_INFO_PRINT_TIME = _UxGT("总打印时间"); //"Total print time"
|
|
PROGMEM Language_Str MSG_INFO_PRINT_LONGEST = _UxGT("最长工作时间"); //"Longest job time"
|
|
PROGMEM Language_Str MSG_INFO_PRINT_FILAMENT = _UxGT("总计挤出"); //"Extruded total"
|
|
#else
|
|
PROGMEM Language_Str MSG_INFO_PRINT_COUNT = _UxGT("打印数"); //"Prints"
|
|
PROGMEM Language_Str MSG_INFO_COMPLETED_PRINTS = _UxGT("完成"); //"Completed"
|
|
PROGMEM Language_Str MSG_INFO_PRINT_TIME = _UxGT("总共"); //"Total"
|
|
PROGMEM Language_Str MSG_INFO_PRINT_LONGEST = _UxGT("最长"); //"Longest"
|
|
PROGMEM Language_Str MSG_INFO_PRINT_FILAMENT = _UxGT("已挤出"); //"Extruded"
|
|
#endif
|
|
|
|
PROGMEM Language_Str MSG_INFO_MIN_TEMP = _UxGT("最低温度"); //"Min Temp"
|
|
PROGMEM Language_Str MSG_INFO_MAX_TEMP = _UxGT("最高温度"); //"Max Temp"
|
|
PROGMEM Language_Str MSG_INFO_PSU = _UxGT("电源供应"); //"Power Supply"
|
|
PROGMEM Language_Str MSG_DRIVE_STRENGTH = _UxGT("驱动力度"); // "Drive Strength"
|
|
PROGMEM Language_Str MSG_DAC_PERCENT_X = _UxGT("X 驱动 %"); // "X Driver %"
|
|
PROGMEM Language_Str MSG_DAC_PERCENT_Y = _UxGT("Y 驱动 %"); // "Y Driver %"
|
|
PROGMEM Language_Str MSG_DAC_PERCENT_Z = _UxGT("Z 驱动 %"); // "Z Driver %"
|
|
PROGMEM Language_Str MSG_DAC_PERCENT_E = _UxGT("E 驱动 %"); // "E Driver %"
|
|
PROGMEM Language_Str MSG_ERROR_TMC = _UxGT("TMC 连接错误");
|
|
PROGMEM Language_Str MSG_DAC_EEPROM_WRITE = _UxGT("保存驱动设置"); // "DAC EEPROM Write"
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER = _UxGT("更换料");
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER_PAUSE = _UxGT("打印已暂停"); // "PRINT PAUSED"
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER_LOAD = _UxGT("装载丝料"); // "LOAD FILAMENT"
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER_UNLOAD = _UxGT("卸载丝料"); // "UNLOAD FILAMENT"
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_OPTION_HEADER = _UxGT("恢复选项:"); // "RESUME OPTIONS:"
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_OPTION_PURGE = _UxGT("清除更多"); // "Purge more"
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_OPTION_RESUME = _UxGT("恢复打印"); //"Resume print"
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_NOZZLE = _UxGT(" 喷嘴: "); // " Nozzle: "
|
|
PROGMEM Language_Str MSG_RUNOUT_SENSOR = _UxGT("断料传感器");
|
|
PROGMEM Language_Str MSG_RUNOUT_DISTANCE_MM = _UxGT("断料距离mm");
|
|
PROGMEM Language_Str MSG_KILL_HOMING_FAILED = _UxGT("归原位失败"); // "Homing failed"
|
|
PROGMEM Language_Str MSG_LCD_PROBING_FAILED = _UxGT("探针探测失败"); // "Probing failed"
|
|
|
|
PROGMEM Language_Str MSG_MMU2_CHOOSE_FILAMENT_HEADER = _UxGT("选择料");
|
|
PROGMEM Language_Str MSG_MMU2_MENU = _UxGT("MMU");
|
|
PROGMEM Language_Str MSG_KILL_MMU2_FIRMWARE = _UxGT("升级MMU固件!");
|
|
PROGMEM Language_Str MSG_MMU2_NOT_RESPONDING = _UxGT("MMU需要专注.");
|
|
PROGMEM Language_Str MSG_MMU2_RESUME = _UxGT("MMU恢复");
|
|
PROGMEM Language_Str MSG_MMU2_RESUMING = _UxGT("MMU恢复中...");
|
|
PROGMEM Language_Str MSG_MMU2_LOAD_FILAMENT = _UxGT("MMU加载");
|
|
PROGMEM Language_Str MSG_MMU2_LOAD_ALL = _UxGT("MMU加载全部");
|
|
PROGMEM Language_Str MSG_MMU2_LOAD_TO_NOZZLE = _UxGT("MMU加载到喷嘴");
|
|
PROGMEM Language_Str MSG_MMU2_EJECT_FILAMENT = _UxGT("MMU弹出");
|
|
PROGMEM Language_Str MSG_MMU2_EJECT_FILAMENT_N = _UxGT("MMU弹出 ~");
|
|
PROGMEM Language_Str MSG_MMU2_UNLOAD_FILAMENT = _UxGT("MMU卸载");
|
|
PROGMEM Language_Str MSG_MMU2_LOADING_FILAMENT = _UxGT("加载填充. %i...");
|
|
PROGMEM Language_Str MSG_MMU2_EJECTING_FILAMENT = _UxGT("弹出填充. ...");
|
|
PROGMEM Language_Str MSG_MMU2_UNLOADING_FILAMENT = _UxGT("卸载填充....");
|
|
PROGMEM Language_Str MSG_MMU2_ALL = _UxGT("全部");
|
|
PROGMEM Language_Str MSG_MMU2_FILAMENT_N = _UxGT("料 ~");
|
|
PROGMEM Language_Str MSG_MMU2_RESET = _UxGT("复位MMU");
|
|
PROGMEM Language_Str MSG_MMU2_RESETTING = _UxGT("MMU复位中...");
|
|
PROGMEM Language_Str MSG_MMU2_EJECT_RECOVER = _UxGT("移出, 按下");
|
|
|
|
PROGMEM Language_Str MSG_MIX = _UxGT("混合");
|
|
PROGMEM Language_Str MSG_MIX_COMPONENT_N = _UxGT("器件 =");
|
|
PROGMEM Language_Str MSG_MIXER = _UxGT("混合器");
|
|
PROGMEM Language_Str MSG_GRADIENT = _UxGT("梯度");
|
|
PROGMEM Language_Str MSG_FULL_GRADIENT = _UxGT("全梯度");
|
|
PROGMEM Language_Str MSG_TOGGLE_MIX = _UxGT("开关混合");
|
|
PROGMEM Language_Str MSG_CYCLE_MIX = _UxGT("循环混合");
|
|
PROGMEM Language_Str MSG_GRADIENT_MIX = _UxGT("梯度混合");
|
|
PROGMEM Language_Str MSG_REVERSE_GRADIENT = _UxGT("反向梯度");
|
|
PROGMEM Language_Str MSG_ACTIVE_VTOOL = _UxGT("激活 V-tool");
|
|
PROGMEM Language_Str MSG_START_VTOOL = _UxGT("开始 V-tool");
|
|
PROGMEM Language_Str MSG_END_VTOOL = _UxGT(" 结束 V-tool");
|
|
PROGMEM Language_Str MSG_GRADIENT_ALIAS = _UxGT("别名 V-tool");
|
|
PROGMEM Language_Str MSG_RESET_VTOOLS = _UxGT("复位 V-tools");
|
|
PROGMEM Language_Str MSG_COMMIT_VTOOL = _UxGT("提交 V-tool Mix");
|
|
PROGMEM Language_Str MSG_VTOOLS_RESET = _UxGT("V-tools 已复位");
|
|
PROGMEM Language_Str MSG_START_Z = _UxGT("开始 Z:");
|
|
PROGMEM Language_Str MSG_END_Z = _UxGT(" 结束 Z:");
|
|
|
|
PROGMEM Language_Str MSG_GAMES = _UxGT("游戏");
|
|
PROGMEM Language_Str MSG_BRICKOUT = _UxGT("敲方块");
|
|
PROGMEM Language_Str MSG_INVADERS = _UxGT("入侵者");
|
|
PROGMEM Language_Str MSG_SNAKE = _UxGT("贪吃蛇");
|
|
PROGMEM Language_Str MSG_MAZE = _UxGT("迷宫");
|
|
|
|
PROGMEM Language_Str MSG_BAD_PAGE = _UxGT("错误页面索引");
|
|
PROGMEM Language_Str MSG_BAD_PAGE_SPEED = _UxGT("错误页面速度");
|
|
|
|
//
|
|
// Filament Change screens show up to 3 lines on a 4-line display
|
|
// ...or up to 2 lines on a 3-line display
|
|
//
|
|
#if LCD_HEIGHT >= 4
|
|
PROGMEM Language_Str MSG_ADVANCED_PAUSE_WAITING = _UxGT(MSG_2_LINE("按下按钮", "恢复打印"));
|
|
PROGMEM Language_Str MSG_PAUSE_PRINT_PARKING = _UxGT(MSG_1_LINE("停靠中..."));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_3_LINE("等待开始", "丝料", "变更")); // "Wait for start of the filament change"
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_3_LINE("插入料", "并按下", "以继续"));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEAT = _UxGT(MSG_2_LINE("按下按钮来", "加热喷嘴.")); // "Press button to heat nozzle."
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEATING = _UxGT(MSG_2_LINE("加热喷嘴", "请等待 ...")); // "Heating nozzle Please wait..."
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_2_LINE("等待", "卸下丝料")); // "Wait for filament unload"
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_2_LINE("等待", "进料")); // "Wait for filament load"
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_PURGE = _UxGT(MSG_2_LINE("等待", "丝料清除")); // "Wait for filament purge"
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_CONT_PURGE = _UxGT(MSG_2_LINE("按下已完成", "料的清洗"));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_2_LINE("等待打印", "恢复")); // "Wait for print to resume"
|
|
#else
|
|
PROGMEM Language_Str MSG_ADVANCED_PAUSE_WAITING = _UxGT(MSG_1_LINE("按下继续"));
|
|
PROGMEM Language_Str MSG_PAUSE_PRINT_PARKING = _UxGT(MSG_1_LINE("停靠中..."));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_1_LINE("请等待 ...")); //"Please wait..."
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_1_LINE("插入并单击")); //"Insert and Click"
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEAT = _UxGT(MSG_1_LINE("按下加热"));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEATING = _UxGT(MSG_1_LINE("加热中 ...")); // "Heating..."
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_1_LINE("退出中 ...")); //"Ejecting..."
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_1_LINE("装载中 ...")); //"Loading..."
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_PURGE = _UxGT(MSG_1_LINE("清除中 ...")); // "Purging..."
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_CONT_PURGE = _UxGT(MSG_1_LINE("按下完成"));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_1_LINE("恢复中 ...")); //"Resuming..."
|
|
#endif
|
|
PROGMEM Language_Str MSG_TMC_DRIVERS = _UxGT("TMC驱动器");
|
|
PROGMEM Language_Str MSG_TMC_CURRENT = _UxGT("驱动电流");
|
|
PROGMEM Language_Str MSG_TMC_HYBRID_THRS = _UxGT("混合阈值");
|
|
PROGMEM Language_Str MSG_TMC_HOMING_THRS = _UxGT("无感回零");
|
|
PROGMEM Language_Str MSG_TMC_STEPPING_MODE = _UxGT("步进模式");
|
|
PROGMEM Language_Str MSG_TMC_STEALTH_ENABLED = _UxGT("StealthChop已使能");
|
|
PROGMEM Language_Str MSG_SERVICE_RESET = _UxGT("复位");
|
|
PROGMEM Language_Str MSG_SERVICE_IN = _UxGT(" 在:");
|
|
PROGMEM Language_Str MSG_BACKLASH = _UxGT("回差");
|
|
PROGMEM Language_Str MSG_BACKLASH_A = LCD_STR_A;
|
|
PROGMEM Language_Str MSG_BACKLASH_B = LCD_STR_B;
|
|
PROGMEM Language_Str MSG_BACKLASH_C = LCD_STR_C;
|
|
PROGMEM Language_Str MSG_BACKLASH_CORRECTION = _UxGT("校正");
|
|
PROGMEM Language_Str MSG_BACKLASH_SMOOTHING = _UxGT("平滑的");
|
|
|
|
PROGMEM Language_Str MSG_LEVEL_X_AXIS = _UxGT("X轴调平");
|
|
PROGMEM Language_Str MSG_AUTO_CALIBRATE = _UxGT("自动校准");
|
|
PROGMEM Language_Str MSG_HEATER_TIMEOUT = _UxGT("加热器超时");
|
|
PROGMEM Language_Str MSG_REHEAT = _UxGT("重新加热");
|
|
PROGMEM Language_Str MSG_REHEATING = _UxGT("重新加热中...");
|
|
}
|
|
|
|
#if FAN_COUNT == 1
|
|
#define MSG_FIRST_FAN_SPEED MSG_FAN_SPEED
|
|
#define MSG_EXTRA_FIRST_FAN_SPEED MSG_EXTRA_FAN_SPEED
|
|
#else
|
|
#define MSG_FIRST_FAN_SPEED MSG_FAN_SPEED_N
|
|
#define MSG_EXTRA_FIRST_FAN_SPEED MSG_EXTRA_FAN_SPEED_N
|
|
#endif
|
|
|