Marlin 2.0 for Flying Bear 4S/5
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

243 lines
12 KiB

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Polish
*
* LCD Menu Messages
* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
*
*/
#ifndef LANGUAGE_PL_H
#define LANGUAGE_PL_H
#define DISPLAY_CHARSET_ISO10646_1
#define WELCOME_MSG MACHINE_NAME " gotowy."
#define MSG_SD_INSERTED "Karta wlozona"
#define MSG_SD_REMOVED "Karta usunieta"
#define MSG_LCD_ENDSTOPS "Krancow." // Max length 8 characters
#define MSG_MAIN "Menu glowne"
#define MSG_AUTOSTART "Autostart"
#define MSG_DISABLE_STEPPERS "Wylacz silniki"
#define MSG_AUTO_HOME "Pozycja zerowa"
#define MSG_AUTO_HOME_X "Home X"
#define MSG_AUTO_HOME_Y "Home Y"
#define MSG_AUTO_HOME_Z "Home Z"
#define MSG_LEVEL_BED_HOMING "Pozycja zerowa"
#define MSG_LEVEL_BED_WAITING "Kliknij by rozp."
#define MSG_LEVEL_BED_NEXT_POINT "Nastepny punkt"
#define MSG_LEVEL_BED_DONE "Wypoziomowano!"
#define MSG_LEVEL_BED_CANCEL "Anuluj"
#define MSG_SET_HOME_OFFSETS "Ust. poz. zer."
#define MSG_HOME_OFFSETS_APPLIED "Poz. zerowa ust."
#define MSG_SET_ORIGIN "Ustaw punkt zero"
#define MSG_PREHEAT_1 "Rozgrzej PLA"
#define MSG_PREHEAT_1_N MSG_PREHEAT_1 " "
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 " All"
#define MSG_PREHEAT_1_BEDONLY "Rozgrzej stol PLA"
#define MSG_PREHEAT_1_SETTINGS "Ustaw. rozg. PLA"
#define MSG_PREHEAT_2 "Rozgrzej ABS"
#define MSG_PREHEAT_2_N MSG_PREHEAT_2 " "
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 " All"
#define MSG_PREHEAT_2_BEDONLY "Rozgrzej stol ABS"
#define MSG_PREHEAT_2_SETTINGS "Ustaw. rozg. ABS"
#define MSG_COOLDOWN "Chlodzenie"
#define MSG_SWITCH_PS_ON "Wlacz zasilacz"
#define MSG_SWITCH_PS_OFF "Wylacz zasilacz"
#define MSG_EXTRUDE "Ekstruzja"
#define MSG_RETRACT "Wycofanie"
#define MSG_MOVE_AXIS "Ruch osi"
#define MSG_LEVEL_BED "Poziom. stolu"
#define MSG_MOVE_X "Przesun w X"
#define MSG_MOVE_Y "Przesun w Y"
#define MSG_MOVE_Z "Przesun w Z"
#define MSG_MOVE_E "Ekstruzja (os E)"
#define MSG_MOVE_01MM "Przesun co .1mm"
#define MSG_MOVE_1MM "Przesun co 1mm"
#define MSG_MOVE_10MM "Przesun co 10mm"
#define MSG_SPEED "Predkosc"
#define MSG_BED_Z "Stol Z"
#define MSG_NOZZLE "Dysza"
#define MSG_BED "Stol"
#define MSG_FAN_SPEED "Obroty wiatraka"
#define MSG_FLOW "Przeplyw"
#define MSG_CONTROL "Ustawienia"
#define MSG_MIN LCD_STR_THERMOMETER " Min"
#define MSG_MAX LCD_STR_THERMOMETER " Max"
#define MSG_FACTOR LCD_STR_THERMOMETER " Mnoznik"
#define MSG_AUTOTEMP "Auto. temperatura"
#define MSG_ON "Wl. "
#define MSG_OFF "Wyl."
#define MSG_PID_P "PID-P"
#define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
#define MSG_SELECT "Select"
#define MSG_ACC "Przyspieszenie"
#define MSG_VX_JERK "Zryw Vx"
#define MSG_VY_JERK "Zryw Vy"
#define MSG_VZ_JERK "Zryw Vz"
#define MSG_VE_JERK "Zryw Ve"
#define MSG_VMAX "Vmax "
#define MSG_VMIN "Vmin"
#define MSG_VTRAV_MIN "Vskok min"
#define MSG_AMAX "Amax"
#define MSG_A_RETRACT "A-wycofanie"
#define MSG_A_TRAVEL "A-przesun."
#define MSG_XSTEPS "krokiX/mm"
#define MSG_YSTEPS "krokiY/mm"
#define MSG_ZSTEPS "krokiZ/mm"
#define MSG_ESTEPS "krokiE/mm"
#define MSG_TEMPERATURE "Temperatura"
#define MSG_MOTION "Ruch"
#define MSG_VOLUMETRIC "Filament"
#define MSG_VOLUMETRIC_ENABLED "E w mm3"
#define MSG_FILAMENT_DIAM "Śr. fil."
#define MSG_CONTRAST "Kontrast LCD"
#define MSG_STORE_EPROM "Zapisz w pamieci"
#define MSG_LOAD_EPROM "Wczytaj z pamieci"
#define MSG_RESTORE_FAILSAFE "Ustaw. fabryczne"
#define MSG_REFRESH "Odswiez"
#define MSG_WATCH "Ekran glowny"
#define MSG_PREPARE "Przygotuj"
#define MSG_TUNE "Strojenie"
#define MSG_PAUSE_PRINT "Pauza"
#define MSG_RESUME_PRINT "Wznowienie"
#define MSG_STOP_PRINT "Stop"
#define MSG_CARD_MENU "Menu karty SD"
#define MSG_NO_CARD "Brak karty"
#define MSG_DWELL "Uspij..."
#define MSG_USERWAIT "Oczekiwanie..."
#define MSG_RESUMING "Wznawianie druku"
#define MSG_PRINT_ABORTED "Druk przerwany"
#define MSG_NO_MOVE "Brak ruchu"
#define MSG_KILLED "Ubity. "
#define MSG_STOPPED "Zatrzymany. "
#define MSG_CONTROL_RETRACT "Wycofaj mm"
#define MSG_CONTROL_RETRACT_SWAP "Z Wycof. mm"
#define MSG_CONTROL_RETRACTF "Wycofaj V"
#define MSG_CONTROL_RETRACT_ZLIFT "Skok Z mm"
#define MSG_CONTROL_RETRACT_RECOVER "Cof. wycof. +mm"
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Z Cof. wyc. +mm"
#define MSG_CONTROL_RETRACT_RECOVERF "Cof. wycof. V"
#define MSG_AUTORETRACT "Auto. wycofanie"
#define MSG_FILAMENTCHANGE "Zmien filament"
#define MSG_INIT_SDCARD "Inicjal. karty SD"
#define MSG_CNG_SDCARD "Zmiana karty SD"
#define MSG_ZPROBE_OUT "Sonda Z za stolem"
#define MSG_BLTOUCH_SELFTEST "BLTouch Self-Test"
#define MSG_BLTOUCH_RESET "Reset BLTouch"
#define MSG_HOME "Home" // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST "first"
#define MSG_ZPROBE_ZOFFSET "Offset Z"
#define MSG_BABYSTEP_X "Babystep X"
#define MSG_BABYSTEP_Y "Babystep Y"
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Blad krancowki"
#define MSG_HEATING_FAILED_LCD "Rozgrz. nieudane"
#define MSG_ERR_REDUNDANT_TEMP "Blad temperatury"
#define MSG_THERMAL_RUNAWAY "Zanik temp."
#define MSG_ERR_MAXTEMP "Err max temp"
#define MSG_ERR_MINTEMP "Err min temp"
#define MSG_ERR_MAXTEMP_BED "Err max temp stolu"
#define MSG_ERR_MINTEMP_BED "Err min temp stolu"
#define MSG_ERR_Z_HOMING "G28 Z Forbidden"
#define MSG_HALTED "Drukarka zatrzym."
#define MSG_PLEASE_RESET "Prosze zresetowac"
#define MSG_SHORT_DAY "d" // One character only
#define MSG_SHORT_HOUR "g" // One character only
#define MSG_SHORT_MINUTE "m" // One character only
#define MSG_HEATING "Rozgrzewanie..."
#define MSG_HEATING_COMPLETE "Rozgrzano"
#define MSG_BED_HEATING "Rozgrzewanie stolu..."
#define MSG_BED_DONE "Rozgrzano stol"
#define MSG_DELTA_CALIBRATE "Kalibrowanie Delty"
#define MSG_DELTA_CALIBRATE_X "Kalibruj X"
#define MSG_DELTA_CALIBRATE_Y "Kalibruj Y"
#define MSG_DELTA_CALIBRATE_Z "Kalibruj Z"
#define MSG_DELTA_CALIBRATE_CENTER "Kalibruj środek"
#define MSG_INFO_MENU "O drukarce"
#define MSG_INFO_PRINTER_MENU "Info drukarki"
#define MSG_INFO_STATS_MENU "Statystyki"
#define MSG_INFO_BOARD_MENU "Board Info"
#define MSG_INFO_THERMISTOR_MENU "Thermistory"
#define MSG_INFO_EXTRUDERS "Ekstrudery"
#define MSG_INFO_BAUDRATE "Prędkosc USB"
#define MSG_INFO_PROTOCOL "Protokol"
#define MSG_LIGHTS_ON "Oswietlenie wl."
#define MSG_LIGHTS_OFF "Oswietlenie wyl."
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT "Wydrukowano"
#define MSG_INFO_COMPLETED_PRINTS "Ukończono"
#define MSG_INFO_PRINT_TIME "Czas druku"
#define MSG_INFO_PRINT_LONGEST "Najdl. druk"
#define MSG_INFO_PRINT_FILAMENT "Uzyty fil."
#else
#define MSG_INFO_PRINT_COUNT "Wydrukowano"
#define MSG_INFO_COMPLETED_PRINTS "Ukonczono"
#define MSG_INFO_PRINT_TIME "Razem"
#define MSG_INFO_PRINT_LONGEST "Najdl. druk"
#define MSG_INFO_PRINT_FILAMENT "Uzyty fil."
#endif
#define MSG_INFO_MIN_TEMP "Min Temp"
#define MSG_INFO_MAX_TEMP "Max Temp"
#define MSG_INFO_PSU "Zasilacz"
#define MSG_DRIVE_STRENGTH "Siła silnika"
#define MSG_DAC_PERCENT "Siła %"
#define MSG_DAC_EEPROM_WRITE "Zapisz DAC EEPROM"
#define MSG_FILAMENT_CHANGE_HEADER "ZMIEN FILAMENT"
#define MSG_FILAMENT_CHANGE_OPTION_HEADER "ZMIEN OPCJE:"
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE "Ekstruduj wiecej"
#define MSG_FILAMENT_CHANGE_OPTION_RESUME "Wznow drukowanie"
#if LCD_HEIGHT >= 4
// Up to 3 lines allowed
#define MSG_FILAMENT_CHANGE_INIT_1 "Czekam na "
#define MSG_FILAMENT_CHANGE_INIT_2 "zmiane filamentu"
#define MSG_FILAMENT_CHANGE_UNLOAD_1 "Czekam na"
#define MSG_FILAMENT_CHANGE_UNLOAD_2 "wyjecie filamentu"
#define MSG_FILAMENT_CHANGE_INSERT_1 "Wloz filament"
#define MSG_FILAMENT_CHANGE_INSERT_2 "i nacisnij przycisk"
#define MSG_FILAMENT_CHANGE_INSERT_3 "aby kontynuowac..."
#define MSG_FILAMENT_CHANGE_LOAD_1 "Czekam na"
#define MSG_FILAMENT_CHANGE_LOAD_2 "wlozenie filamentu"
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Czekam na"
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 "ekstruzje filamentu"
#define MSG_FILAMENT_CHANGE_RESUME_1 "Czekam na"
#define MSG_FILAMENT_CHANGE_RESUME_2 "wznowienie druku"
#else // LCD_HEIGHT < 4
// Up to 2 lines allowed
#define MSG_FILAMENT_CHANGE_INIT_1 "Prosze czekac..."
#define MSG_FILAMENT_CHANGE_UNLOAD_1 "Wysuwanie..."
#define MSG_FILAMENT_CHANGE_INSERT_1 "Wloz i nacisnij prz."
#define MSG_FILAMENT_CHANGE_LOAD_1 "Ladowanie..."
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Ekstruzja..."
#define MSG_FILAMENT_CHANGE_RESUME_1 "Wznowienie..."
#endif // LCD_HEIGHT < 4
#endif // LANGUAGE_PL_H