andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Marlin 2.0 for Flying Bear 4S/5
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
19038 Commits
4 Branches
6 Tags
134 MiB
 
 
 
 
 
 
Tree: 3d102a77ca
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from '3d102a77ca'
${ noResults }
Marlin_FB4S/Marlin/src/lcd/extui/dgus/mks/DGUSScreenHandler.cpp

2030 lines
74 KiB
Raw Blame History

/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "../../../../inc/MarlinConfigPre.h"
#if ENABLED(DGUS_LCD_UI_MKS)
#include "../DGUSScreenHandler.h"
#include "../../../../inc/MarlinConfig.h"
#include "../../../../MarlinCore.h"
#include "../../../../module/settings.h"
#include "../../../../module/temperature.h"
#include "../../../../module/motion.h"
#include "../../../../module/planner.h"
#include "../../../../module/printcounter.h"
#include "../../../../gcode/gcode.h"
#if HAS_STEALTHCHOP
#include "../../../../module/stepper/trinamic.h"
#include "../../../../module/stepper/indirection.h"
#endif
#include "../../../../module/probe.h"
#if ENABLED(POWER_LOSS_RECOVERY)
#include "../../../../feature/powerloss.h"
#endif
#if ENABLED(SDSUPPORT)
static ExtUI::FileList filelist;
#endif
bool DGUSAutoTurnOff = false;
uint8_t mks_language_index; // Initialized by settings.load()
// endianness swap
uint32_t swap32(const uint32_t value) { return (value & 0x000000FFU) << 24U | (value & 0x0000FF00U) << 8U | (value & 0x00FF0000U) >> 8U | (value & 0xFF000000U) >> 24U; }
#if 0
void DGUSScreenHandler::sendinfoscreen_ch_mks(const uint16_t *line1, const uint16_t *line2, const uint16_t *line3, const uint16_t *line4) {
dgusdisplay.WriteVariable(VP_MSGSTR1, line1, 32, true);
dgusdisplay.WriteVariable(VP_MSGSTR2, line2, 32, true);
dgusdisplay.WriteVariable(VP_MSGSTR3, line3, 32, true);
dgusdisplay.WriteVariable(VP_MSGSTR4, line4, 32, true);
}
void DGUSScreenHandler::sendinfoscreen_en_mks(const char *line1, const char *line2, const char *line3, const char *line4) {
dgusdisplay.WriteVariable(VP_MSGSTR1, line1, 32, true);
dgusdisplay.WriteVariable(VP_MSGSTR2, line2, 32, true);
dgusdisplay.WriteVariable(VP_MSGSTR3, line3, 32, true);
dgusdisplay.WriteVariable(VP_MSGSTR4, line4, 32, true);
}
void DGUSScreenHandler::sendinfoscreen_mks(const void *line1, const void *line2, const void *line3, const void *line4, uint16_t language) {
if (language == MKS_English)
DGUSScreenHandler::sendinfoscreen_en_mks((char *)line1, (char *)line2, (char *)line3, (char *)line4);
else if (language == MKS_SimpleChinese)
DGUSScreenHandler::sendinfoscreen_ch_mks((uint16_t *)line1, (uint16_t *)line2, (uint16_t *)line3, (uint16_t *)line4);
}
#endif
void DGUSScreenHandler::DGUSLCD_SendFanToDisplay(DGUS_VP_Variable &var) {
if (var.memadr) {
//DEBUG_ECHOPGM(" DGUS_LCD_SendWordValueToDisplay ", var.VP);
//DEBUG_ECHOLNPGM(" data ", *(uint16_t *)var.memadr);
uint16_t tmp = *(uint8_t *) var.memadr; // +1 -> avoid rounding issues for the display.
// tmp = map(tmp, 0, 255, 0, 100);
dgusdisplay.WriteVariable(var.VP, tmp);
}
}
void DGUSScreenHandler::DGUSLCD_SendBabyStepToDisplay_MKS(DGUS_VP_Variable &var) {
float value = current_position.z;
DEBUG_ECHOLNPAIR_F(" >> ", value, 6);
value *= cpow(10, 2);
dgusdisplay.WriteVariable(VP_SD_Print_Baby, (uint16_t)value);
}
void DGUSScreenHandler::DGUSLCD_SendPrintTimeToDisplay_MKS(DGUS_VP_Variable &var) {
duration_t elapsed = print_job_timer.duration();
uint32_t time = elapsed.value;
dgusdisplay.WriteVariable(VP_PrintTime_H, uint16_t(time / 3600));
dgusdisplay.WriteVariable(VP_PrintTime_M, uint16_t(time % 3600 / 60));
dgusdisplay.WriteVariable(VP_PrintTime_S, uint16_t((time % 3600) % 60));
}
void DGUSScreenHandler::DGUSLCD_SetUint8(DGUS_VP_Variable &var, void *val_ptr) {
if (var.memadr) {
const uint16_t value = swap16(*(uint16_t*)val_ptr);
DEBUG_ECHOLNPGM("FAN value get:", value);
*(uint8_t*)var.memadr = map(constrain(value, 0, 255), 0, 255, 0, 255);
DEBUG_ECHOLNPGM("FAN value change:", *(uint8_t*)var.memadr);
}
}
void DGUSScreenHandler::DGUSLCD_SendGbkToDisplay(DGUS_VP_Variable &var) {
DEBUG_ECHOLNPGM(" data ", *(uint16_t *)var.memadr);
uint16_t *tmp = (uint16_t*) var.memadr;
dgusdisplay.WriteVariable(var.VP, tmp, var.size, true);
}
void DGUSScreenHandler::DGUSLCD_SendStringToDisplay_Language_MKS(DGUS_VP_Variable &var) {
if (mks_language_index == MKS_English) {
char *tmp = (char*) var.memadr;
dgusdisplay.WriteVariable(var.VP, tmp, var.size, true);
}
else if (mks_language_index == MKS_SimpleChinese) {
uint16_t *tmp = (uint16_t *)var.memadr;
dgusdisplay.WriteVariable(var.VP, tmp, var.size, true);
}
}
void DGUSScreenHandler::DGUSLCD_SendTMCStepValue(DGUS_VP_Variable &var) {
#if ENABLED(SENSORLESS_HOMING)
#if X_HAS_STEALTHCHOP
tmc_step.x = stepperX.homing_threshold();
dgusdisplay.WriteVariable(var.VP, *(int16_t*)var.memadr);
#endif
#if Y_HAS_STEALTHCHOP
tmc_step.y = stepperY.homing_threshold();
dgusdisplay.WriteVariable(var.VP, *(int16_t*)var.memadr);
#endif
#if Z_HAS_STEALTHCHOP
tmc_step.z = stepperZ.homing_threshold();
dgusdisplay.WriteVariable(var.VP, *(int16_t*)var.memadr);
#endif
#endif
}
#if ENABLED(SDSUPPORT)
void DGUSScreenHandler::DGUSLCD_SD_FileSelected(DGUS_VP_Variable &var, void *val_ptr) {
uint16_t touched_nr = (int16_t)swap16(*(uint16_t*)val_ptr) + top_file;
if (touched_nr != 0x0F && touched_nr > filelist.count()) return;
if (!filelist.seek(touched_nr) && touched_nr != 0x0F) return;
if (touched_nr == 0x0F) {
if (filelist.isAtRootDir())
GotoScreen(DGUSLCD_SCREEN_MAIN);
else
filelist.upDir();
return;
}
if (filelist.isDir()) {
filelist.changeDir(filelist.filename());
top_file = 0;
ForceCompleteUpdate();
return;
}
#if ENABLED(DGUS_PRINT_FILENAME)
// Send print filename
dgusdisplay.WriteVariable(VP_SD_Print_Filename, filelist.filename(), VP_SD_FileName_LEN, true);
#endif
// Setup Confirmation screen
file_to_print = touched_nr;
GotoScreen(MKSLCD_SCREEN_PRINT_CONFIRM);
}
void DGUSScreenHandler::DGUSLCD_SD_StartPrint(DGUS_VP_Variable &var, void *val_ptr) {
if (!filelist.seek(file_to_print)) return;
ExtUI::printFile(filelist.shortFilename());
GotoScreen(MKSLCD_SCREEN_PRINT);
z_offset_add = 0;
}
void DGUSScreenHandler::DGUSLCD_SD_ResumePauseAbort(DGUS_VP_Variable &var, void *val_ptr) {
if (!ExtUI::isPrintingFromMedia()) return; // avoid race condition when user stays in this menu and printer finishes.
switch (swap16(*(uint16_t*)val_ptr)) {
case 0: { // Resume
auto cs = getCurrentScreen();
if (runout_mks.runout_status != RUNOUT_WAITTING_STATUS && runout_mks.runout_status != UNRUNOUT_STATUS) {
if (cs == MKSLCD_SCREEN_PRINT || cs == MKSLCD_SCREEN_PAUSE)
GotoScreen(MKSLCD_SCREEN_PAUSE);
return;
}
else
runout_mks.runout_status = UNRUNOUT_STATUS;
GotoScreen(MKSLCD_SCREEN_PRINT);
if (ExtUI::isPrintingFromMediaPaused()) {
nozzle_park_mks.print_pause_start_flag = 0;
nozzle_park_mks.blstatus = true;
ExtUI::resumePrint();
}
} break;
case 1: // Pause
GotoScreen(MKSLCD_SCREEN_PAUSE);
if (!ExtUI::isPrintingFromMediaPaused()) {
nozzle_park_mks.print_pause_start_flag = 1;
nozzle_park_mks.blstatus = true;
ExtUI::pausePrint();
//ExtUI::mks_pausePrint();
}
break;
case 2: // Abort
HandleUserConfirmationPopUp(VP_SD_AbortPrintConfirmed, nullptr, PSTR("Abort printing"), filelist.filename(), PSTR("?"), true, true, false, true);
break;
}
}
void DGUSScreenHandler::DGUSLCD_SD_SendFilename(DGUS_VP_Variable& var) {
uint16_t target_line = (var.VP - VP_SD_FileName0) / VP_SD_FileName_LEN;
if (target_line > DGUS_SD_FILESPERSCREEN) return;
char tmpfilename[VP_SD_FileName_LEN + 1] = "";
var.memadr = (void*)tmpfilename;
uint16_t dir_icon_val = 25;
if (filelist.seek(top_file + target_line)) {
snprintf_P(tmpfilename, VP_SD_FileName_LEN, PSTR("%s%c"), filelist.filename(), filelist.isDir() ? '/' : 0); // snprintf_P(tmpfilename, VP_SD_FileName_LEN, PSTR("%s"), filelist.filename());
dir_icon_val = filelist.isDir() ? 0 : 1;
}
DGUSLCD_SendStringToDisplay(var);
dgusdisplay.WriteVariable(VP_File_Pictutr0 + target_line * 2, dir_icon_val);
}
void DGUSScreenHandler::SDCardInserted() {
top_file = 0;
filelist.refresh();
auto cs = getCurrentScreen();
if (cs == DGUSLCD_SCREEN_MAIN || cs == DGUSLCD_SCREEN_STATUS)
GotoScreen(MKSLCD_SCREEN_CHOOSE_FILE);
}
void DGUSScreenHandler::SDCardRemoved() {
if (current_screen == DGUSLCD_SCREEN_SDFILELIST
|| (current_screen == DGUSLCD_SCREEN_CONFIRM && (ConfirmVP == VP_SD_AbortPrintConfirmed || ConfirmVP == VP_SD_FileSelectConfirm))
|| current_screen == DGUSLCD_SCREEN_SDPRINTMANIPULATION
) filelist.refresh();
}
void DGUSScreenHandler::SDPrintingFinished() {
if (DGUSAutoTurnOff) {
queue.exhaust();
gcode.process_subcommands_now(F("M81"));
}
GotoScreen(MKSLCD_SCREEN_PrintDone);
}
#else
void DGUSScreenHandler::PrintReturn(DGUS_VP_Variable& var, void *val_ptr) {
uint16_t value = swap16(*(uint16_t*)val_ptr);
if (value == 0x0F) GotoScreen(DGUSLCD_SCREEN_MAIN);
}
#endif // SDSUPPORT
void DGUSScreenHandler::ScreenChangeHook(DGUS_VP_Variable &var, void *val_ptr) {
uint8_t *tmp = (uint8_t*)val_ptr;
// The keycode in target is coded as <from-frame><to-frame>, so 0x0100A means
// from screen 1 (main) to 10 (temperature). DGUSLCD_SCREEN_POPUP is special,
// meaning "return to previous screen"
DGUSLCD_Screens target = (DGUSLCD_Screens)tmp[1];
DEBUG_ECHOLNPGM("\n DEBUG target", target);
// when the dgus had reboot, it will enter the DGUSLCD_SCREEN_MAIN page,
// so user can change any page to use this function, an it will check
// if robin nano is printing. when it is, dgus will enter the printing
// page to continue print;
//
//if (printJobOngoing() || printingIsPaused()) {
// if (target == MKSLCD_PAUSE_SETTING_MOVE || target == MKSLCD_PAUSE_SETTING_EX
// || target == MKSLCD_SCREEN_PRINT || target == MKSLCD_SCREEN_PAUSE
// ) {
// }
// else
// GotoScreen(MKSLCD_SCREEN_PRINT);
// return;
//}
if (target == DGUSLCD_SCREEN_POPUP) {
SetupConfirmAction(ExtUI::setUserConfirmed);
// Special handling for popup is to return to previous menu
if (current_screen == DGUSLCD_SCREEN_POPUP && confirm_action_cb) confirm_action_cb();
PopToOldScreen();
return;
}
UpdateNewScreen(target);
#ifdef DEBUG_DGUSLCD
if (!DGUSLCD_FindScreenVPMapList(target)) DEBUG_ECHOLNPGM("WARNING: No screen Mapping found for ", target);
#endif
}
void DGUSScreenHandler::ScreenBackChange(DGUS_VP_Variable &var, void *val_ptr) {
const uint16_t target = swap16(*(uint16_t *)val_ptr);
DEBUG_ECHOLNPGM(" back = 0x%x", target);
switch (target) {
}
}
void DGUSScreenHandler::ZoffsetConfirm(DGUS_VP_Variable &var, void *val_ptr) {
settings.save();
if (printJobOngoing())
GotoScreen(MKSLCD_SCREEN_PRINT);
else if (print_job_timer.isPaused)
GotoScreen(MKSLCD_SCREEN_PAUSE);
}
void DGUSScreenHandler::GetTurnOffCtrl(DGUS_VP_Variable &var, void *val_ptr) {
DEBUG_ECHOLNPGM("GetTurnOffCtrl\n");
const uint16_t value = swap16(*(uint16_t *)val_ptr);
switch (value) {
case 0 ... 1: DGUSAutoTurnOff = (bool)value; break;
default: break;
}
}
void DGUSScreenHandler::GetMinExtrudeTemp(DGUS_VP_Variable &var, void *val_ptr) {
DEBUG_ECHOLNPGM("GetMinExtrudeTemp");
const uint16_t value = swap16(*(uint16_t *)val_ptr);
TERN_(PREVENT_COLD_EXTRUSION, thermalManager.extrude_min_temp = value);
mks_min_extrusion_temp = value;
settings.save();
}
void DGUSScreenHandler::GetZoffsetDistance(DGUS_VP_Variable &var, void *val_ptr) {
DEBUG_ECHOLNPGM("GetZoffsetDistance");
const uint16_t value = swap16(*(uint16_t *)val_ptr);
float val_distance = 0;
switch (value) {
case 0: val_distance = 0.01; break;
case 1: val_distance = 0.1; break;
case 2: val_distance = 0.5; break;
case 3: val_distance = 1; break;
default: val_distance = 0.01; break;
}
ZOffset_distance = val_distance;
}
void DGUSScreenHandler::GetManualMovestep(DGUS_VP_Variable &var, void *val_ptr) {
DEBUG_ECHOLNPGM("\nGetManualMovestep");
*(uint16_t *)var.memadr = swap16(*(uint16_t *)val_ptr);
}
void DGUSScreenHandler::EEPROM_CTRL(DGUS_VP_Variable &var, void *val_ptr) {
const uint16_t eep_flag = swap16(*(uint16_t *)val_ptr);
switch (eep_flag) {
case 0:
settings.save();
settings.load(); // load eeprom data to check the data is right
GotoScreen(MKSLCD_SCREEN_EEP_Config);
break;
case 1:
settings.reset();
GotoScreen(MKSLCD_SCREEN_EEP_Config);
break;
default: break;
}
}
void DGUSScreenHandler::Z_offset_select(DGUS_VP_Variable &var, void *val_ptr) {
const uint16_t z_value = swap16(*(uint16_t *)val_ptr);
switch (z_value) {
case 0: Z_distance = 0.01; break;
case 1: Z_distance = 0.1; break;
case 2: Z_distance = 0.5; break;
default: Z_distance = 1; break;
}
}
void DGUSScreenHandler::GetOffsetValue(DGUS_VP_Variable &var, void *val_ptr) {
#if HAS_BED_PROBE
int32_t value = swap32(*(int32_t *)val_ptr);
float Offset = value / 100.0f;
DEBUG_ECHOLNPAIR_F("\nget int6 offset >> ", value, 6);
#endif
switch (var.VP) {
case VP_OFFSET_X: TERN_(HAS_BED_PROBE, probe.offset.x = Offset); break;
case VP_OFFSET_Y: TERN_(HAS_BED_PROBE, probe.offset.y = Offset); break;
case VP_OFFSET_Z: TERN_(HAS_BED_PROBE, probe.offset.z = Offset); break;
default: break;
}
settings.save();
}
void DGUSScreenHandler::LanguageChange_MKS(DGUS_VP_Variable &var, void *val_ptr) {
const uint16_t lag_flag = swap16(*(uint16_t *)val_ptr);
switch (lag_flag) {
case MKS_SimpleChinese:
DGUS_LanguageDisplay(MKS_SimpleChinese);
mks_language_index = MKS_SimpleChinese;
dgusdisplay.MKS_WriteVariable(VP_LANGUAGE_CHANGE1, MKS_Language_Choose);
dgusdisplay.MKS_WriteVariable(VP_LANGUAGE_CHANGE2, MKS_Language_NoChoose);
settings.save();
break;
case MKS_English:
DGUS_LanguageDisplay(MKS_English);
mks_language_index = MKS_English;
dgusdisplay.MKS_WriteVariable(VP_LANGUAGE_CHANGE1, MKS_Language_NoChoose);
dgusdisplay.MKS_WriteVariable(VP_LANGUAGE_CHANGE2, MKS_Language_Choose);
settings.save();
break;
default: break;
}
}
#if ENABLED(MESH_BED_LEVELING)
uint8_t mesh_point_count = GRID_MAX_POINTS;
#endif
void DGUSScreenHandler::Level_Ctrl_MKS(DGUS_VP_Variable &var, void *val_ptr) {
const uint16_t lev_but = swap16(*(uint16_t *)val_ptr);
#if ENABLED(MESH_BED_LEVELING)
auto cs = getCurrentScreen();
#endif
switch (lev_but) {
case 0:
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
static uint8_t a_first_level = 1;
if (a_first_level == 1) {
a_first_level = 0;
queue.enqueue_now_P(G28_STR);
}
queue.enqueue_now(F("G29"));
#elif ENABLED(MESH_BED_LEVELING)
mesh_point_count = GRID_MAX_POINTS;
if (mks_language_index == MKS_English) {
const char level_buf_en[] = "Start Level";
dgusdisplay.WriteVariable(VP_AutoLevel_1_Dis, level_buf_en, 32, true);
}
else if (mks_language_index == MKS_SimpleChinese) {
const uint16_t level_buf_ch[] = {0xAABF, 0xBCCA, 0xF7B5, 0xBDC6, 0x2000};
dgusdisplay.WriteVariable(VP_AutoLevel_1_Dis, level_buf_ch, 32, true);
}
cs = getCurrentScreen();
if (cs != MKSLCD_AUTO_LEVEL) GotoScreen(MKSLCD_AUTO_LEVEL);
#else
GotoScreen(MKSLCD_SCREEN_LEVEL);
#endif
break;
case 1:
soft_endstop._enabled = true;
GotoScreen(MKSLCD_SCREEM_TOOL);
break;
default: break;
}
}
void DGUSScreenHandler::MeshLevelDistanceConfig(DGUS_VP_Variable &var, void *val_ptr) {
const uint16_t mesh_dist = swap16(*(uint16_t *)val_ptr);
switch (mesh_dist) {
case 0: mesh_adj_distance = 0.01; break;
case 1: mesh_adj_distance = 0.1; break;
case 2: mesh_adj_distance = 1; break;
default: mesh_adj_distance = 0.1; break;
}
}
void DGUSScreenHandler::MeshLevel(DGUS_VP_Variable &var, void *val_ptr) {
#if ENABLED(MESH_BED_LEVELING)
const uint16_t mesh_value = swap16(*(uint16_t *)val_ptr);
// static uint8_t a_first_level = 1;
char cmd_buf[30];
float offset = mesh_adj_distance;
int16_t integer, Deci, Deci2;
if (!queue.ring_buffer.empty()) return;
switch (mesh_value) {
case 0:
offset = mesh_adj_distance;
integer = offset; // get int
Deci = (offset * 10);
Deci = Deci % 10;
Deci2 = offset * 100;
Deci2 = Deci2 % 10;
soft_endstop._enabled = false;
queue.enqueue_now(F("G91"));
snprintf_P(cmd_buf, 30, PSTR("G1 Z%d.%d%d"), integer, Deci, Deci2);
queue.enqueue_one_now(cmd_buf);
queue.enqueue_now(F("G90"));
//soft_endstop._enabled = true;
break;
case 1:
offset = mesh_adj_distance;
integer = offset; // get int
Deci = (offset * 10);
Deci = Deci % 10;
Deci2 = offset * 100;
Deci2 = Deci2 % 10;
soft_endstop._enabled = false;
queue.enqueue_now(F("G91"));
snprintf_P(cmd_buf, 30, PSTR("G1 Z-%d.%d%d"), integer, Deci, Deci2);
queue.enqueue_one_now(cmd_buf);
queue.enqueue_now(F("G90"));
break;
case 2:
if (mesh_point_count == GRID_MAX_POINTS) { // The first point
queue.enqueue_now(F("G28"));
queue.enqueue_now(F("G29S1"));
mesh_point_count--;
if (mks_language_index == MKS_English) {
const char level_buf_en1[] = "Next Point";
dgusdisplay.WriteVariable(VP_AutoLevel_1_Dis, level_buf_en1, 32, true);
}
else if (mks_language_index == MKS_SimpleChinese) {
const uint16_t level_buf_ch1[] = {0xC2CF, 0xBBD2, 0xE3B5, 0x2000};
dgusdisplay.WriteVariable(VP_AutoLevel_1_Dis, level_buf_ch1, 32, true);
}
}
else if (mesh_point_count > 1) { // 倒数第二个点
queue.enqueue_now(F("G29S2"));
mesh_point_count--;
if (mks_language_index == MKS_English) {
const char level_buf_en2[] = "Next Point";
dgusdisplay.WriteVariable(VP_AutoLevel_1_Dis, level_buf_en2, 32, true);
}
else if (mks_language_index == MKS_SimpleChinese) {
const uint16_t level_buf_ch2[] = {0xC2CF, 0xBBD2, 0xE3B5, 0x2000};
dgusdisplay.WriteVariable(VP_AutoLevel_1_Dis, level_buf_ch2, 32, true);
}
}
else if (mesh_point_count == 1) {
queue.enqueue_now(F("G29S2"));
mesh_point_count--;
if (mks_language_index == MKS_English) {
const char level_buf_en2[] = "Level Finsh";
dgusdisplay.WriteVariable(VP_AutoLevel_1_Dis, level_buf_en2, 32, true);
}
else if (mks_language_index == MKS_SimpleChinese) {
const uint16_t level_buf_ch2[] = {0xF7B5, 0xBDC6, 0xEACD, 0xC9B3, 0x2000};
dgusdisplay.WriteVariable(VP_AutoLevel_1_Dis, level_buf_ch2, 32, true);
}
settings.save();
}
else if (mesh_point_count == 0) {
mesh_point_count = GRID_MAX_POINTS;
soft_endstop._enabled = true;
settings.save();
GotoScreen(MKSLCD_SCREEM_TOOL);
}
break;
default:
break;
}
#endif // MESH_BED_LEVELING
}
void DGUSScreenHandler::SD_FileBack(DGUS_VP_Variable&, void*) {
GotoScreen(MKSLCD_SCREEN_HOME);
}
void DGUSScreenHandler::LCD_BLK_Adjust(DGUS_VP_Variable &var, void *val_ptr) {
const uint16_t lcd_value = swap16(*(uint16_t *)val_ptr);
lcd_default_light = constrain(lcd_value, 10, 100);
const uint16_t lcd_data[2] = { lcd_default_light, lcd_default_light };
dgusdisplay.WriteVariable(0x0082, &lcd_data, 5, true);
}
void DGUSScreenHandler::ManualAssistLeveling(DGUS_VP_Variable &var, void *val_ptr) {
const int16_t point_value = swap16(*(uint16_t *)val_ptr);
// Insist on leveling first time at this screen
static bool first_level_flag = false;
if (!first_level_flag || point_value == 0x0001) {
queue.enqueue_now_P(G28_STR);
first_level_flag = true;
}
constexpr uint16_t level_speed = 1500;
auto enqueue_corner_move = [](int16_t lx, int16_t ly, uint16_t fr) {
char buf_level[32];
sprintf_P(buf_level, "G0X%dY%dF%d", lx, ly, fr);
queue.enqueue_one_now(buf_level);
};
if (WITHIN(point_value, 0x0001, 0x0005))
queue.enqueue_now(F("G1Z10"));
switch (point_value) {
case 0x0001:
enqueue_corner_move(X_MIN_POS + ABS(mks_corner_offsets[0].x),
Y_MIN_POS + ABS(mks_corner_offsets[0].y), level_speed);
queue.enqueue_now(F("G28Z"));
break;
case 0x0002:
enqueue_corner_move(X_MAX_POS - ABS(mks_corner_offsets[1].x),
Y_MIN_POS + ABS(mks_corner_offsets[1].y), level_speed);
break;
case 0x0003:
enqueue_corner_move(X_MAX_POS - ABS(mks_corner_offsets[2].x),
Y_MAX_POS - ABS(mks_corner_offsets[2].y), level_speed);
break;
case 0x0004:
enqueue_corner_move(X_MIN_POS + ABS(mks_corner_offsets[3].x),
Y_MAX_POS - ABS(mks_corner_offsets[3].y), level_speed);
break;
case 0x0005:
enqueue_corner_move(ABS(mks_corner_offsets[4].x),
ABS(mks_corner_offsets[4].y), level_speed);
break;
}
if (WITHIN(point_value, 0x0002, 0x0005)) {
//queue.enqueue_now(F("G28Z"));
queue.enqueue_now(F("G1Z-10"));
}
}
#define mks_min(a, b) ((a) < (b)) ? (a) : (b)
#define mks_max(a, b) ((a) > (b)) ? (a) : (b)
void DGUSScreenHandler::TMC_ChangeConfig(DGUS_VP_Variable &var, void *val_ptr) {
#if EITHER(HAS_TRINAMIC_CONFIG, HAS_STEALTHCHOP)
const uint16_t tmc_value = swap16(*(uint16_t*)val_ptr);
#endif
switch (var.VP) {
case VP_TMC_X_STEP:
#if USE_SENSORLESS
#if X_HAS_STEALTHCHOP
stepperX.homing_threshold(mks_min(tmc_value, 255));
settings.save();
//tmc_step.x = stepperX.homing_threshold();
#endif
#endif
break;
case VP_TMC_Y_STEP:
#if USE_SENSORLESS
#if Y_HAS_STEALTHCHOP
stepperY.homing_threshold(mks_min(tmc_value, 255));
settings.save();
//tmc_step.y = stepperY.homing_threshold();
#endif
#endif
break;
case VP_TMC_Z_STEP:
#if USE_SENSORLESS
#if Z_HAS_STEALTHCHOP
stepperZ.homing_threshold(mks_min(tmc_value, 255));
settings.save();
//tmc_step.z = stepperZ.homing_threshold();
#endif
#endif
break;
case VP_TMC_X_Current:
#if AXIS_IS_TMC(X)
stepperX.rms_current(tmc_value);
settings.save();
#endif
break;
case VP_TMC_X1_Current:
#if AXIS_IS_TMC(X2)
stepperX2.rms_current(tmc_value);
settings.save();
#endif
break;
case VP_TMC_Y_Current:
#if AXIS_IS_TMC(Y)
stepperY.rms_current(tmc_value);
settings.save();
#endif
break;
case VP_TMC_Y1_Current:
#if AXIS_IS_TMC(X2)
stepperY2.rms_current(tmc_value);
settings.save();
#endif
break;
case VP_TMC_Z_Current:
#if AXIS_IS_TMC(Z)
stepperZ.rms_current(tmc_value);
settings.save();
#endif
break;
case VP_TMC_Z1_Current:
#if AXIS_IS_TMC(Z2)
stepperZ2.rms_current(tmc_value);
settings.save();
#endif
break;
case VP_TMC_E0_Current:
#if AXIS_IS_TMC(E0)
stepperE0.rms_current(tmc_value);
settings.save();
#endif
break;
case VP_TMC_E1_Current:
#if AXIS_IS_TMC(E1)
stepperE1.rms_current(tmc_value);
settings.save();
#endif
break;
default:
break;
}
#if USE_SENSORLESS
TERN_(X_HAS_STEALTHCHOP, tmc_step.x = stepperX.homing_threshold());
TERN_(Y_HAS_STEALTHCHOP, tmc_step.y = stepperY.homing_threshold());
TERN_(Z_HAS_STEALTHCHOP, tmc_step.z = stepperZ.homing_threshold());
#endif
}
void DGUSScreenHandler::HandleManualMove(DGUS_VP_Variable &var, void *val_ptr) {
DEBUG_ECHOLNPGM("HandleManualMove");
int16_t movevalue = swap16(*(uint16_t*)val_ptr);
// Choose Move distance
if (manualMoveStep == 0x01) manualMoveStep = 10;
else if (manualMoveStep == 0x02) manualMoveStep = 100;
else if (manualMoveStep == 0x03) manualMoveStep = 1000;
DEBUG_ECHOLNPGM("QUEUE LEN:", queue.length);
if (!print_job_timer.isPaused() && !queue.ring_buffer.empty())
return;
char axiscode;
unsigned int speed = 1500; // FIXME: get default feedrate for manual moves, don't hardcode.
switch (var.VP) { // switch X Y Z or Home
default: return;
case VP_MOVE_X:
DEBUG_ECHOLNPGM("X Move");
axiscode = 'X';
if (!ExtUI::canMove(ExtUI::axis_t::X)) goto cannotmove;
break;
case VP_MOVE_Y:
DEBUG_ECHOLNPGM("Y Move");
axiscode = 'Y';
if (!ExtUI::canMove(ExtUI::axis_t::Y)) goto cannotmove;
break;
case VP_MOVE_Z:
DEBUG_ECHOLNPGM("Z Move");
axiscode = 'Z';
speed = 300; // default to 5mm/s
if (!ExtUI::canMove(ExtUI::axis_t::Z)) goto cannotmove;
break;
case VP_MOTOR_LOCK_UNLOK:
DEBUG_ECHOLNPGM("Motor Unlock");
movevalue = 5;
axiscode = '\0';
// return ;
break;
case VP_HOME_ALL: // only used for homing
DEBUG_ECHOLNPGM("Home all");
axiscode = '\0';
movevalue = 0; // ignore value sent from display, this VP is _ONLY_ for homing.
//return;
break;
case VP_X_HOME:
DEBUG_ECHOLNPGM("X Home");
axiscode = 'X';
movevalue = 0;
break;
case VP_Y_HOME:
DEBUG_ECHOLNPGM("Y Home");
axiscode = 'Y';
movevalue = 0;
break;
case VP_Z_HOME:
DEBUG_ECHOLNPGM("Z Home");
axiscode = 'Z';
movevalue = 0;
break;
}
DEBUG_ECHOPGM("movevalue = ", movevalue);
if (movevalue != 0 && movevalue != 5) { // get move distance
switch (movevalue) {
case 0x0001: movevalue = manualMoveStep; break;
case 0x0002: movevalue = -manualMoveStep; break;
default: movevalue = 0; break;
}
}
if (!movevalue) {
// homing
DEBUG_ECHOPGM(" homing ", AS_CHAR(axiscode));
// char buf[6] = "G28 X";
// buf[4] = axiscode;
char buf[6];
sprintf(buf, "G28 %c", axiscode);
//DEBUG_ECHOPGM(" ", buf);
queue.enqueue_one_now(buf);
//DEBUG_ECHOLNPGM(" ✓");
ForceCompleteUpdate();
return;
}
else if (movevalue == 5) {
DEBUG_ECHOPGM("send M84");
char buf[6];
snprintf_P(buf,6,PSTR("M84 %c"), axiscode);
queue.enqueue_one_now(buf);
ForceCompleteUpdate();
return;
}
else {
// movement
DEBUG_ECHOPGM(" move ", AS_CHAR(axiscode));
bool old_relative_mode = relative_mode;
if (!relative_mode) {
//DEBUG_ECHOPGM(" G91");
queue.enqueue_now(F("G91"));
//DEBUG_ECHOPGM(" ✓ ");
}
char buf[32]; // G1 X9999.99 F12345
// unsigned int backup_speed = MMS_TO_MMM(feedrate_mm_s);
char sign[] = "\0";
int16_t value = movevalue / 100;
if (movevalue < 0) { value = -value; sign[0] = '-'; }
int16_t fraction = ABS(movevalue) % 100;
snprintf_P(buf, 32, PSTR("G0 %c%s%d.%02d F%d"), axiscode, sign, value, fraction, speed);
queue.enqueue_one_now(buf);
//if (backup_speed != speed) {
// snprintf_P(buf, 32, PSTR("G0 F%d"), backup_speed);
// queue.enqueue_one_now(buf);
// //DEBUG_ECHOPGM(" ", buf);
//}
//while (!enqueue_and_echo_command(buf)) idle();
//DEBUG_ECHOLNPGM(" ✓ ");
if (!old_relative_mode) {
//DEBUG_ECHOPGM("G90");
//queue.enqueue_now(F("G90"));
queue.enqueue_now(F("G90"));
//DEBUG_ECHOPGM(" ✓ ");
}
}
ForceCompleteUpdate();
DEBUG_ECHOLNPGM("manmv done.");
return;
cannotmove:
DEBUG_ECHOLNPGM(" cannot move ", AS_CHAR(axiscode));
return;
}
void DGUSScreenHandler::GetParkPos_MKS(DGUS_VP_Variable &var, void *val_ptr) {
const int16_t value_pos = swap16(*(int16_t*)val_ptr);
switch (var.VP) {
case VP_X_PARK_POS: mks_park_pos.x = value_pos; break;
case VP_Y_PARK_POS: mks_park_pos.y = value_pos; break;
case VP_Z_PARK_POS: mks_park_pos.z = value_pos; break;
default: break;
}
skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel
}
void DGUSScreenHandler::HandleChangeLevelPoint_MKS(DGUS_VP_Variable &var, void *val_ptr) {
DEBUG_ECHOLNPGM("HandleChangeLevelPoint_MKS");
const int16_t value_raw = swap16(*(int16_t*)val_ptr);
DEBUG_ECHOLNPAIR_F("value_raw:", value_raw);
*(int16_t*)var.memadr = value_raw;
settings.save();
skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel
}
void DGUSScreenHandler::HandleStepPerMMChanged_MKS(DGUS_VP_Variable &var, void *val_ptr) {
DEBUG_ECHOLNPGM("HandleStepPerMMChanged_MKS");
const uint16_t value_raw = swap16(*(uint16_t*)val_ptr);
const float value = (float)value_raw;
DEBUG_ECHOLNPGM("value_raw:", value_raw);
DEBUG_ECHOLNPAIR_F("value:", value);
ExtUI::axis_t axis;
switch (var.VP) {
default: return;
case VP_X_STEP_PER_MM: axis = ExtUI::axis_t::X; break;
case VP_Y_STEP_PER_MM: axis = ExtUI::axis_t::Y; break;
case VP_Z_STEP_PER_MM: axis = ExtUI::axis_t::Z; break;
}
ExtUI::setAxisSteps_per_mm(value, axis);
DEBUG_ECHOLNPAIR_F("value_set:", ExtUI::getAxisSteps_per_mm(axis));
settings.save();
skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel
}
void DGUSScreenHandler::HandleStepPerMMExtruderChanged_MKS(DGUS_VP_Variable &var, void *val_ptr) {
DEBUG_ECHOLNPGM("HandleStepPerMMExtruderChanged_MKS");
const uint16_t value_raw = swap16(*(uint16_t*)val_ptr);
const float value = (float)value_raw;
DEBUG_ECHOLNPGM("value_raw:", value_raw);
DEBUG_ECHOLNPAIR_F("value:", value);
ExtUI::extruder_t extruder;
switch (var.VP) {
default: return;
#if HAS_HOTEND
case VP_E0_STEP_PER_MM: extruder = ExtUI::extruder_t::E0; break;
#endif
#if HAS_MULTI_HOTEND
case VP_E1_STEP_PER_MM: extruder = ExtUI::extruder_t::E1; break;
#endif
}
ExtUI::setAxisSteps_per_mm(value, extruder);
DEBUG_ECHOLNPAIR_F("value_set:", ExtUI::getAxisSteps_per_mm(extruder));
settings.save();
skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel
}
void DGUSScreenHandler::HandleMaxSpeedChange_MKS(DGUS_VP_Variable &var, void *val_ptr) {
DEBUG_ECHOLNPGM("HandleMaxSpeedChange_MKS");
const uint16_t value_raw = swap16(*(uint16_t*)val_ptr);
const float value = (float)value_raw;
DEBUG_ECHOLNPGM("value_raw:", value_raw);
DEBUG_ECHOLNPAIR_F("value:", value);
ExtUI::axis_t axis;
switch (var.VP) {
case VP_X_MAX_SPEED: axis = ExtUI::axis_t::X; break;
case VP_Y_MAX_SPEED: axis = ExtUI::axis_t::Y; break;
case VP_Z_MAX_SPEED: axis = ExtUI::axis_t::Z; break;
default: return;
}
ExtUI::setAxisMaxFeedrate_mm_s(value, axis);
DEBUG_ECHOLNPAIR_F("value_set:", ExtUI::getAxisMaxFeedrate_mm_s(axis));
settings.save();
skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel
}
void DGUSScreenHandler::HandleExtruderMaxSpeedChange_MKS(DGUS_VP_Variable &var, void *val_ptr) {
DEBUG_ECHOLNPGM("HandleExtruderMaxSpeedChange_MKS");
const uint16_t value_raw = swap16(*(uint16_t*)val_ptr);
const float value = (float)value_raw;
DEBUG_ECHOLNPGM("value_raw:", value_raw);
DEBUG_ECHOLNPAIR_F("value:", value);
ExtUI::extruder_t extruder;
switch (var.VP) {
default: return;
#if HAS_HOTEND
case VP_E0_MAX_SPEED: extruder = ExtUI::extruder_t::E0; break;
#endif
#if HAS_MULTI_HOTEND
#endif
case VP_E1_MAX_SPEED: extruder = ExtUI::extruder_t::E1; break;
}
ExtUI::setAxisMaxFeedrate_mm_s(value, extruder);
DEBUG_ECHOLNPAIR_F("value_set:", ExtUI::getAxisMaxFeedrate_mm_s(extruder));
settings.save();
skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel
}
void DGUSScreenHandler::HandleMaxAccChange_MKS(DGUS_VP_Variable &var, void *val_ptr) {
DEBUG_ECHOLNPGM("HandleMaxAccChange_MKS");
const uint16_t value_raw = swap16(*(uint16_t*)val_ptr);
const float value = (float)value_raw;
DEBUG_ECHOLNPGM("value_raw:", value_raw);
DEBUG_ECHOLNPAIR_F("value:", value);
ExtUI::axis_t axis;
switch (var.VP) {
default: return;
case VP_X_ACC_MAX_SPEED: axis = ExtUI::axis_t::X; break;
case VP_Y_ACC_MAX_SPEED: axis = ExtUI::axis_t::Y; break;
case VP_Z_ACC_MAX_SPEED: axis = ExtUI::axis_t::Z; break;
}
ExtUI::setAxisMaxAcceleration_mm_s2(value, axis);
DEBUG_ECHOLNPAIR_F("value_set:", ExtUI::getAxisMaxAcceleration_mm_s2(axis));
settings.save();
skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel
}
void DGUSScreenHandler::HandleExtruderAccChange_MKS(DGUS_VP_Variable &var, void *val_ptr) {
DEBUG_ECHOLNPGM("HandleExtruderAccChange_MKS");
uint16_t value_raw = swap16(*(uint16_t*)val_ptr);
DEBUG_ECHOLNPGM("value_raw:", value_raw);
float value = (float)value_raw;
ExtUI::extruder_t extruder;
switch (var.VP) {
default: return;
#if HAS_HOTEND
case VP_E0_ACC_MAX_SPEED: extruder = ExtUI::extruder_t::E0; settings.load(); break;
#endif
#if HAS_MULTI_HOTEND
case VP_E1_ACC_MAX_SPEED: extruder = ExtUI::extruder_t::E1; settings.load(); break;
#endif
}
DEBUG_ECHOLNPAIR_F("value:", value);
ExtUI::setAxisMaxAcceleration_mm_s2(value, extruder);
DEBUG_ECHOLNPAIR_F("value_set:", ExtUI::getAxisMaxAcceleration_mm_s2(extruder));
settings.save();
skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel
}
void DGUSScreenHandler::HandleTravelAccChange_MKS(DGUS_VP_Variable &var, void *val_ptr) {
uint16_t value_travel = swap16(*(uint16_t*)val_ptr);
planner.settings.travel_acceleration = (float)value_travel;
skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel
}
void DGUSScreenHandler::HandleFeedRateMinChange_MKS(DGUS_VP_Variable &var, void *val_ptr) {
uint16_t value_t = swap16(*(uint16_t*)val_ptr);
planner.settings.min_feedrate_mm_s = (float)value_t;
skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel
}
void DGUSScreenHandler::HandleMin_T_F_MKS(DGUS_VP_Variable &var, void *val_ptr) {
uint16_t value_t_f = swap16(*(uint16_t*)val_ptr);
planner.settings.min_travel_feedrate_mm_s = (float)value_t_f;
skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel
}
void DGUSScreenHandler::HandleAccChange_MKS(DGUS_VP_Variable &var, void *val_ptr) {
uint16_t value_acc = swap16(*(uint16_t*)val_ptr);
planner.settings.acceleration = (float)value_acc;
skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel
}
#if ENABLED(PREVENT_COLD_EXTRUSION)
void DGUSScreenHandler::HandleGetExMinTemp_MKS(DGUS_VP_Variable &var, void *val_ptr) {
const uint16_t value_ex_min_temp = swap16(*(uint16_t*)val_ptr);
thermalManager.extrude_min_temp = value_ex_min_temp;
skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel
}
#endif
#if HAS_PID_HEATING
void DGUSScreenHandler::HandleTemperaturePIDChanged(DGUS_VP_Variable &var, void *val_ptr) {
const uint16_t rawvalue = swap16(*(uint16_t*)val_ptr);
DEBUG_ECHOLNPGM("V1:", rawvalue);
const float value = 1.0f * rawvalue;
DEBUG_ECHOLNPGM("V2:", value);
float newvalue = 0;
switch (var.VP) {
default: return;
#if HAS_HOTEND
case VP_E0_PID_P: newvalue = value; break;
case VP_E0_PID_I: newvalue = scalePID_i(value); break;
case VP_E0_PID_D: newvalue = scalePID_d(value); break;
#endif
#if HAS_MULTI_HOTEND
case VP_E1_PID_P: newvalue = value; break;
case VP_E1_PID_I: newvalue = scalePID_i(value); break;
case VP_E1_PID_D: newvalue = scalePID_d(value); break;
#endif
#if HAS_HEATED_BED
case VP_BED_PID_P: newvalue = value; break;
case VP_BED_PID_I: newvalue = scalePID_i(value); break;
case VP_BED_PID_D: newvalue = scalePID_d(value); break;
#endif
}
DEBUG_ECHOLNPAIR_F("V3:", newvalue);
*(float *)var.memadr = newvalue;
settings.save();
skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel
}
#endif // HAS_PID_HEATING
#if ENABLED(BABYSTEPPING)
void DGUSScreenHandler::HandleLiveAdjustZ(DGUS_VP_Variable &var, void *val_ptr) {
DEBUG_ECHOLNPGM("HandleLiveAdjustZ");
char babystep_buf[30];
float step = ZOffset_distance;
uint16_t flag = swap16(*(uint16_t*)val_ptr);
switch (flag) {
case 0:
if (step == 0.01)
queue.inject(F("M290 Z-0.01"));
else if (step == 0.1)
queue.inject(F("M290 Z-0.1"));
else if (step == 0.5)
queue.inject(F("M290 Z-0.5"));
else if (step == 1)
queue.inject(F("M290 Z-1"));
else
queue.inject(F("M290 Z-0.01"));
z_offset_add = z_offset_add - ZOffset_distance;
break;
case 1:
if (step == 0.01)
queue.inject(F("M290 Z0.01"));
else if (step == 0.1)
queue.inject(F("M290 Z0.1"));
else if (step == 0.5)
queue.inject(F("M290 Z0.5"));
else if (step == 1)
queue.inject(F("M290 Z1"));
else
queue.inject(F("M290 Z-0.01"));
z_offset_add = z_offset_add + ZOffset_distance;
break;
default:
break;
}
ForceCompleteUpdate();
}
#endif // BABYSTEPPING
void DGUSScreenHandler::GetManualFilament(DGUS_VP_Variable &var, void *val_ptr) {
DEBUG_ECHOLNPGM("GetManualFilament");
uint16_t value_len = swap16(*(uint16_t*)val_ptr);
float value = (float)value_len;
DEBUG_ECHOLNPAIR_F("Get Filament len value:", value);
distanceFilament = value;
skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel
}
void DGUSScreenHandler::GetManualFilamentSpeed(DGUS_VP_Variable &var, void *val_ptr) {
DEBUG_ECHOLNPGM("GetManualFilamentSpeed");
uint16_t value_len = swap16(*(uint16_t*)val_ptr);
DEBUG_ECHOLNPAIR_F("filamentSpeed_mm_s value:", value_len);
filamentSpeed_mm_s = value_len;
skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel
}
void DGUSScreenHandler::MKS_FilamentLoadUnload(DGUS_VP_Variable &var, void *val_ptr, const int filamentDir) {
#if EITHER(HAS_MULTI_HOTEND, SINGLENOZZLE)
uint8_t swap_tool = 0;
#else
constexpr uint8_t swap_tool = 1; // T0 (or none at all)
#endif
#if HAS_HOTEND
uint8_t hotend_too_cold = 0;
#endif
if (!print_job_timer.isPaused() && !queue.ring_buffer.empty())
return;
const uint16_t val_t = swap16(*(uint16_t*)val_ptr);
switch (val_t) {
default: break;
case 0:
#if HAS_HOTEND
if (thermalManager.tooColdToExtrude(0))
hotend_too_cold = 1;
else {
#if EITHER(HAS_MULTI_HOTEND, SINGLENOZZLE)
swap_tool = 1;
#endif
}
#endif
break;
case 1:
#if HAS_MULTI_HOTEND
if (thermalManager.tooColdToExtrude(1)) hotend_too_cold = 2; else swap_tool = 2;
#elif ENABLED(SINGLENOZZLE)
if (thermalManager.tooColdToExtrude(0)) hotend_too_cold = 1; else swap_tool = 2;
#endif
break;
}
#if BOTH(HAS_HOTEND, PREVENT_COLD_EXTRUSION)
if (hotend_too_cold) {
if (thermalManager.targetTooColdToExtrude(hotend_too_cold - 1)) thermalManager.setTargetHotend(thermalManager.extrude_min_temp, hotend_too_cold - 1);
sendinfoscreen(F("NOTICE"), nullptr, F("Please wait."), F("Nozzle heating!"), true, true, true, true);
SetupConfirmAction(nullptr);
GotoScreen(DGUSLCD_SCREEN_POPUP);
}
#endif
if (swap_tool) {
char buf[30];
snprintf_P(buf, 30
#if EITHER(HAS_MULTI_HOTEND, SINGLENOZZLE)
, PSTR("M1002T%cE%dF%d"), char('0' + swap_tool - 1)
#else
, PSTR("M1002E%dF%d")
#endif
, (int)distanceFilament * filamentDir, filamentSpeed_mm_s * 60
);
queue.inject(buf);
}
}
/**
* M1002: Do a tool-change and relative move for MKS_FilamentLoadUnload
* within the G-code execution window for best concurrency.
*/
void GcodeSuite::M1002() {
#if EITHER(HAS_MULTI_HOTEND, SINGLENOZZLE)
{
char buf[3];
sprintf_P(buf, PSTR("T%c"), char('0' + parser.intval('T')));
process_subcommands_now(buf);
}
#endif
const uint8_t old_axis_relative = axis_relative;
set_e_relative(); // M83
{
char buf[20];
snprintf_P(buf, 20, PSTR("G1E%dF%d"), parser.intval('E'), parser.intval('F'));
process_subcommands_now(buf);
}
axis_relative = old_axis_relative;
}
void DGUSScreenHandler::MKS_FilamentLoad(DGUS_VP_Variable &var, void *val_ptr) {
DEBUG_ECHOLNPGM("MKS_FilamentLoad");
MKS_FilamentLoadUnload(var, val_ptr, 1);
}
void DGUSScreenHandler::MKS_FilamentUnLoad(DGUS_VP_Variable &var, void *val_ptr) {
DEBUG_ECHOLNPGM("MKS_FilamentUnLoad");
MKS_FilamentLoadUnload(var, val_ptr, -1);
}
#if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
void DGUSScreenHandler::HandleFilamentOption(DGUS_VP_Variable &var, void *val_ptr) {
DEBUG_ECHOLNPGM("HandleFilamentOption");
uint8_t e_temp = 0;
filament_data.heated = false;
uint16_t preheat_option = swap16(*(uint16_t*)val_ptr);
if (preheat_option >= 10) { // Unload filament type
preheat_option -= 10;
filament_data.action = 2;
filament_data.purge_length = DGUS_FILAMENT_PURGE_LENGTH;
}
else if (preheat_option <= 8) // Load filament type
filament_data.action = 1;
else // Cancel filament operation
filament_data.action = 0;
switch (preheat_option) {
case 0: // Load PLA
#ifdef PREHEAT_1_TEMP_HOTEND
e_temp = PREHEAT_1_TEMP_HOTEND;
#endif
break;
case 1: // Load ABS
TERN_(PREHEAT_2_TEMP_HOTEND, e_temp = PREHEAT_2_TEMP_HOTEND);
break;
case 2: // Load PET
#ifdef PREHEAT_3_TEMP_HOTEND
e_temp = PREHEAT_3_TEMP_HOTEND;
#endif
break;
case 3: // Load FLEX
#ifdef PREHEAT_4_TEMP_HOTEND
e_temp = PREHEAT_4_TEMP_HOTEND;
#endif
break;
case 9: // Cool down
default:
e_temp = 0;
break;
}
if (filament_data.action == 0) { // Go back to utility screen
#if HAS_HOTEND
thermalManager.setTargetHotend(e_temp, ExtUI::extruder_t::E0);
#endif
#if HAS_MULTI_HOTEND
thermalManager.setTargetHotend(e_temp, ExtUI::extruder_t::E1);
#endif
GotoScreen(DGUSLCD_SCREEN_UTILITY);
}
else { // Go to the preheat screen to show the heating progress
switch (var.VP) {
default: return;
#if HAS_HOTEND
case VP_E0_FILAMENT_LOAD_UNLOAD:
filament_data.extruder = ExtUI::extruder_t::E0;
thermalManager.setTargetHotend(e_temp, filament_data.extruder);
break;
#endif
#if HAS_MULTI_HOTEND
case VP_E1_FILAMENT_LOAD_UNLOAD:
filament_data.extruder = ExtUI::extruder_t::E1;
thermalManager.setTargetHotend(e_temp, filament_data.extruder);
break;
#endif
}
}
}
void DGUSScreenHandler::HandleFilamentLoadUnload(DGUS_VP_Variable &var) {
DEBUG_ECHOLNPGM("HandleFilamentLoadUnload");
if (filament_data.action <= 0) return;
// If we close to the target temperature, we can start load or unload the filament
if (thermalManager.hotEnoughToExtrude(filament_data.extruder) && \
thermalManager.targetHotEnoughToExtrude(filament_data.extruder)) {
float movevalue = DGUS_FILAMENT_LOAD_LENGTH_PER_TIME;
if (filament_data.action == 1) { // load filament
if (!filament_data.heated) {
filament_data.heated = true;
}
movevalue = ExtUI::getAxisPosition_mm(filament_data.extruder) + movevalue;
}
else { // unload filament
if (!filament_data.heated) {
GotoScreen(DGUSLCD_SCREEN_FILAMENT_UNLOADING);
filament_data.heated = true;
}
// Before unloading extrude to prevent jamming
if (filament_data.purge_length >= 0) {
movevalue = ExtUI::getAxisPosition_mm(filament_data.extruder) + movevalue;
filament_data.purge_length -= movevalue;
}
else {
movevalue = ExtUI::getAxisPosition_mm(filament_data.extruder) - movevalue;
}
}
ExtUI::setAxisPosition_mm(movevalue, filament_data.extruder);
}
}
#endif // DGUS_FILAMENT_LOADUNLOAD
bool DGUSScreenHandler::loop() {
dgusdisplay.loop();
const millis_t ms = millis();
static millis_t next_event_ms = 0;
static uint8_t language_times = 2;
if (!IsScreenComplete() || ELAPSED(ms, next_event_ms)) {
next_event_ms = ms + DGUS_UPDATE_INTERVAL_MS;
UpdateScreenVPData();
}
if (language_times != 0) {
LanguagePInit();
DGUS_LanguageDisplay(mks_language_index);
language_times--;
}
#if ENABLED(SHOW_BOOTSCREEN)
static bool booted = false;
if (!booted && ELAPSED(ms, TERN(USE_MKS_GREEN_UI, 1000, BOOTSCREEN_TIMEOUT))) {
booted = true;
#if USE_SENSORLESS
TERN_(X_HAS_STEALTHCHOP, tmc_step.x = stepperX.homing_threshold());
TERN_(Y_HAS_STEALTHCHOP, tmc_step.y = stepperY.homing_threshold());
TERN_(Z_HAS_STEALTHCHOP, tmc_step.z = stepperZ.homing_threshold());
#endif
#if ENABLED(PREVENT_COLD_EXTRUSION)
if (mks_min_extrusion_temp != 0)
thermalManager.extrude_min_temp = mks_min_extrusion_temp;
#endif
DGUS_ExtrudeLoadInit();
TERN_(DGUS_MKS_RUNOUT_SENSOR, DGUS_RunoutInit());
if (TERN0(POWER_LOSS_RECOVERY, recovery.valid()))
GotoScreen(DGUSLCD_SCREEN_POWER_LOSS);
else
GotoScreen(DGUSLCD_SCREEN_MAIN);
}
#if ENABLED(DGUS_MKS_RUNOUT_SENSOR)
if (booted && printingIsActive()) DGUS_Runout_Idle();
#endif
#endif // SHOW_BOOTSCREEN
return IsScreenComplete();
}
void DGUSScreenHandler::LanguagePInit() {
switch (mks_language_index) {
case MKS_SimpleChinese:
dgusdisplay.MKS_WriteVariable(VP_LANGUAGE_CHANGE1, MKS_Language_Choose);
dgusdisplay.MKS_WriteVariable(VP_LANGUAGE_CHANGE2, MKS_Language_NoChoose);
break;
case MKS_English:
dgusdisplay.MKS_WriteVariable(VP_LANGUAGE_CHANGE1, MKS_Language_NoChoose);
dgusdisplay.MKS_WriteVariable(VP_LANGUAGE_CHANGE2, MKS_Language_Choose);
break;
default:
break;
}
}
void DGUSScreenHandler::DGUS_ExtrudeLoadInit(void) {
ex_filament.ex_length = distanceFilament;
ex_filament.ex_load_unload_flag = 0;
ex_filament.ex_need_time = filamentSpeed_mm_s;
ex_filament.ex_speed = 0;
ex_filament.ex_status = EX_NONE;
ex_filament.ex_tick_end = 0;
ex_filament.ex_tick_start = 0;
}
void DGUSScreenHandler::DGUS_RunoutInit(void) {
#if PIN_EXISTS(MT_DET_1)
SET_INPUT_PULLUP(MT_DET_1_PIN);
#endif
runout_mks.de_count = 0;
runout_mks.de_times = 10;
runout_mks.pin_status = 1;
runout_mks.runout_status = UNRUNOUT_STATUS;
}
void DGUSScreenHandler::DGUS_Runout_Idle(void) {
#if ENABLED(DGUS_MKS_RUNOUT_SENSOR)
// scanf runout pin
switch (runout_mks.runout_status) {
case RUNOUT_STATUS:
runout_mks.runout_status = RUNOUT_BEGIN_STATUS;
queue.inject(F("M25"));
GotoScreen(MKSLCD_SCREEN_PAUSE);
sendinfoscreen(F("NOTICE"), nullptr, F("Please change filament!"), nullptr, true, true, true, true);
//SetupConfirmAction(nullptr);
GotoScreen(DGUSLCD_SCREEN_POPUP);
break;
case UNRUNOUT_STATUS:
if (READ(MT_DET_1_PIN) == MT_DET_PIN_STATE)
runout_mks.runout_status = RUNOUT_STATUS;
break;
case RUNOUT_BEGIN_STATUS:
if (READ(MT_DET_1_PIN) != MT_DET_PIN_STATE)
runout_mks.runout_status = RUNOUT_WAITTING_STATUS;
break;
case RUNOUT_WAITTING_STATUS:
if (READ(MT_DET_1_PIN) == MT_DET_PIN_STATE)
runout_mks.runout_status = RUNOUT_BEGIN_STATUS;
break;
default: break;
}
#endif
}
void DGUSScreenHandler::DGUS_LanguageDisplay(uint8_t var) {
if (var == MKS_English) {
const char home_buf_en[] = "Home";
dgusdisplay.WriteVariable(VP_HOME_Dis, home_buf_en, 32, true);
const char setting_buf_en[] = "Setting";
dgusdisplay.WriteVariable(VP_Setting_Dis, setting_buf_en, 32, true);
const char Tool_buf_en[] = "Tool";
dgusdisplay.WriteVariable(VP_Tool_Dis, Tool_buf_en, 32, true);
const char Print_buf_en[] = "Print";
dgusdisplay.WriteVariable(VP_Print_Dis, Print_buf_en, 32, true);
const char Language_buf_en[] = "Language";
dgusdisplay.WriteVariable(VP_Language_Dis, Language_buf_en, 32, true);
const char About_buf_en[] = "About";
dgusdisplay.WriteVariable(VP_About_Dis, About_buf_en, 32, true);
const char Config_buf_en[] = "Config";
dgusdisplay.WriteVariable(VP_Config_Dis, Config_buf_en, 32, true);
const char MotorConfig_buf_en[] = "MotorConfig";
dgusdisplay.WriteVariable(VP_MotorConfig_Dis, MotorConfig_buf_en, 32, true);
const char LevelConfig_buf_en[] = "LevelConfig";
dgusdisplay.WriteVariable(VP_LevelConfig_Dis, LevelConfig_buf_en, 32, true);
const char TemperatureConfig_buf_en[] = "Temperature";
dgusdisplay.WriteVariable(VP_TemperatureConfig_Dis, TemperatureConfig_buf_en, 32, true);
const char Advance_buf_en[] = "Advance";
dgusdisplay.WriteVariable(VP_Advance_Dis, Advance_buf_en, 32, true);
const char Filament_buf_en[] = "Extrude";
dgusdisplay.WriteVariable(VP_Filament_Dis, Filament_buf_en, 32, true);
const char Move_buf_en[] = "Move";
dgusdisplay.WriteVariable(VP_Move_Dis, Move_buf_en, 32, true);
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
const char Level_buf_en[] = "AutoLevel";
dgusdisplay.WriteVariable(VP_Level_Dis, Level_buf_en, 32, true);
#elif ENABLED(MESH_BED_LEVELING)
const char Level_buf_en[] = "MeshLevel";
dgusdisplay.WriteVariable(VP_Level_Dis, Level_buf_en, 32, true);
#else
const char Level_buf_en[] = "Level";
dgusdisplay.WriteVariable(VP_Level_Dis, Level_buf_en, 32, true);
#endif
const char MotorPluse_buf_en[] = "MotorPluse";
dgusdisplay.WriteVariable(VP_MotorPluse_Dis, MotorPluse_buf_en, 32, true);
const char MotorMaxSpeed_buf_en[] = "MotorMaxSpeed";
dgusdisplay.WriteVariable(VP_MotorMaxSpeed_Dis, MotorMaxSpeed_buf_en, 32, true);
const char MotorMaxAcc_buf_en[] = "MotorAcc";
dgusdisplay.WriteVariable(VP_MotorMaxAcc_Dis, MotorMaxAcc_buf_en, 32, true);
const char TravelAcc_buf_en[] = "TravelAcc";
dgusdisplay.WriteVariable(VP_TravelAcc_Dis, TravelAcc_buf_en, 32, true);
const char FeedRateMin_buf_en[] = "FeedRateMin";
dgusdisplay.WriteVariable(VP_FeedRateMin_Dis, FeedRateMin_buf_en, 32, true);
const char TravelFeeRateMin_buf_en[] = "TravelFeedRateMin";
dgusdisplay.WriteVariable(VP_TravelFeeRateMin_Dis, TravelFeeRateMin_buf_en, 32, true);
const char Acc_buf_en[] = "Acc";
dgusdisplay.WriteVariable(VP_ACC_Dis, Acc_buf_en, 32, true);
const char Point_One_buf_en[] = "Point_First";
dgusdisplay.WriteVariable(VP_Point_One_Dis, Point_One_buf_en, 32, true);
const char Point_Two_buf_en[] = "Point_Second";
dgusdisplay.WriteVariable(VP_Point_Two_Dis, Point_Two_buf_en, 32, true);
const char Point_Three_buf_en[] = "Point_Third";
dgusdisplay.WriteVariable(VP_Point_Three_Dis, Point_Three_buf_en, 32, true);
const char Point_Four_buf_en[] = "Point_Fourth";
dgusdisplay.WriteVariable(VP_Point_Four_Dis, Point_Four_buf_en, 32, true);
const char Point_Five_buf_en[] = "Point_Fifth";
dgusdisplay.WriteVariable(VP_Point_Five_Dis, Point_Five_buf_en, 32, true);
const char Extrusion_buf_en[] = "Extrusion";
dgusdisplay.WriteVariable(VP_Extrusion_Dis, Extrusion_buf_en, 32, true);
const char HeatBed_buf_en[] = "HeatBed";
dgusdisplay.WriteVariable(VP_HeatBed_Dis, HeatBed_buf_en, 32, true);
const char FactoryDefaults_buf_en[] = "FactoryDefaults";
dgusdisplay.WriteVariable(VP_FactoryDefaults_Dis, FactoryDefaults_buf_en, 32, true);
const char StoreSetting_buf_en[] = "StoreSetting";
dgusdisplay.WriteVariable(VP_StoreSetting_Dis, StoreSetting_buf_en, 32, true);
const char PrintPauseConfig_buf_en[] = "PrintPauseConfig";
dgusdisplay.WriteVariable(VP_PrintPauseConfig_Dis, PrintPauseConfig_buf_en, 32, true);
const char X_Pluse_buf_en[] = "X_Pluse";
dgusdisplay.WriteVariable(VP_X_Pluse_Dis, X_Pluse_buf_en, 32, true);
const char Y_Pluse_buf_en[] = "Y_Pluse";
dgusdisplay.WriteVariable(VP_Y_Pluse_Dis, Y_Pluse_buf_en, 32, true);
const char Z_Pluse_buf_en[] = "Z_Pluse";
dgusdisplay.WriteVariable(VP_Z_Pluse_Dis, Z_Pluse_buf_en, 32, true);
const char E0_Pluse_buf_en[] = "E0_Pluse";
dgusdisplay.WriteVariable(VP_E0_Pluse_Dis, E0_Pluse_buf_en, 32, true);
const char E1_Pluse_buf_en[] = "E1_Pluse";
dgusdisplay.WriteVariable(VP_E1_Pluse_Dis, E1_Pluse_buf_en, 32, true);
const char X_Max_Speed_buf_en[] = "X_Max_Speed";
dgusdisplay.WriteVariable(VP_X_Max_Speed_Dis, X_Max_Speed_buf_en, 32, true);
const char Y_Max_Speed_buf_en[] = "Y_Max_Speed";
dgusdisplay.WriteVariable(VP_Y_Max_Speed_Dis, Y_Max_Speed_buf_en, 32, true);
const char Z_Max_Speed_buf_en[] = "Z_Max_Speed";
dgusdisplay.WriteVariable(VP_Z_Max_Speed_Dis, Z_Max_Speed_buf_en, 32, true);
const char E0_Max_Speed_buf_en[] = "E0_Max_Speed";
dgusdisplay.WriteVariable(VP_E0_Max_Speed_Dis, E0_Max_Speed_buf_en, 32, true);
const char E1_Max_Speed_buf_en[] = "E1_Max_Speed";
dgusdisplay.WriteVariable(VP_E1_Max_Speed_Dis, E1_Max_Speed_buf_en, 32, true);
const char X_Max_Acc_Speed_buf_en[] = "X_Max_Acc_Speed";
dgusdisplay.WriteVariable(VP_X_Max_Acc_Speed_Dis, X_Max_Acc_Speed_buf_en, 32, true);
const char Y_Max_Acc_Speed_buf_en[] = "Y_Max_Acc_Speed";
dgusdisplay.WriteVariable(VP_Y_Max_Acc_Speed_Dis, Y_Max_Acc_Speed_buf_en, 32, true);
const char Z_Max_Acc_Speed_buf_en[] = "Z_Max_Acc_Speed";
dgusdisplay.WriteVariable(VP_Z_Max_Acc_Speed_Dis, Z_Max_Acc_Speed_buf_en, 32, true);
const char E0_Max_Acc_Speed_buf_en[] = "E0_Max_Acc_Speed";
dgusdisplay.WriteVariable(VP_E0_Max_Acc_Speed_Dis, E0_Max_Acc_Speed_buf_en, 32, true);
const char E1_Max_Acc_Speed_buf_en[] = "E1_Max_Acc_Speed";
dgusdisplay.WriteVariable(VP_E1_Max_Acc_Speed_Dis, E1_Max_Acc_Speed_buf_en, 32, true);
const char X_PARK_POS_buf_en[] = "X_PARK_POS";
dgusdisplay.WriteVariable(VP_X_PARK_POS_Dis, X_PARK_POS_buf_en, 32, true);
const char Y_PARK_POS_buf_en[] = "Y_PARK_POS";
dgusdisplay.WriteVariable(VP_Y_PARK_POS_Dis, Y_PARK_POS_buf_en, 32, true);
const char Z_PARK_POS_buf_en[] = "Z_PARK_POS";
dgusdisplay.WriteVariable(VP_Z_PARK_POS_Dis, Z_PARK_POS_buf_en, 32, true);
const char Length_buf_en[] = "Length";
dgusdisplay.WriteVariable(VP_Length_Dis, Length_buf_en, 32, true);
const char Speed_buf_en[] = "Speed";
dgusdisplay.WriteVariable(VP_Speed_Dis, Speed_buf_en, 32, true);
const char InOut_buf_en[] = "InOut";
dgusdisplay.WriteVariable(VP_InOut_Dis, InOut_buf_en, 32, true);
const char PrintTimet_buf_en[] = "PrintTime";
dgusdisplay.WriteVariable(VP_PrintTime_Dis, PrintTimet_buf_en, 32, true);
const char E0_Temp_buf_en[] = "E0_Temp";
dgusdisplay.WriteVariable(VP_E0_Temp_Dis, E0_Temp_buf_en, 32, true);
const char E1_Temp_buf_en[] = "E1_Temp";
dgusdisplay.WriteVariable(VP_E1_Temp_Dis, E1_Temp_buf_en, 32, true);
const char HB_Temp_buf_en[] = "HB_Temp";
dgusdisplay.WriteVariable(VP_HB_Temp_Dis, HB_Temp_buf_en, 32, true);
const char Feedrate_buf_en[] = "Feedrate";
dgusdisplay.WriteVariable(VP_Feedrate_Dis, Feedrate_buf_en, 32, true);
const char PrintAcc_buf_en[] = "PrintSpeed";
dgusdisplay.WriteVariable(VP_PrintAcc_Dis, PrintAcc_buf_en, 32, true);
const char FAN_Speed_buf_en[] = "FAN_Speed";
dgusdisplay.WriteVariable(VP_Fan_Speed_Dis, FAN_Speed_buf_en, 32, true);
const char Printing_buf_en[] = "Printing";
dgusdisplay.WriteVariable(VP_Printing_Dis, Printing_buf_en, 32, true);
const char Info_EEPROM_1_buf_en[] = "Store setting?";
dgusdisplay.WriteVariable(VP_Info_EEPROM_1_Dis, Info_EEPROM_1_buf_en, 32, true);
const char Info_EEPROM_2_buf_en[] = "Revert setting?";
dgusdisplay.WriteVariable(VP_Info_EEPROM_2_Dis, Info_EEPROM_2_buf_en, 32, true);
const char Info_PrinfFinsh_1_buf_en[] = "Print Done";
dgusdisplay.WriteVariable(VP_Info_PrinfFinsh_1_Dis, Info_PrinfFinsh_1_buf_en, 32, true);
const char TMC_X_Step_buf_en[] = "X_SenSitivity";
dgusdisplay.WriteVariable(VP_TMC_X_Step_Dis, TMC_X_Step_buf_en, 32, true);
const char TMC_Y_Step_buf_en[] = "Y_SenSitivity";
dgusdisplay.WriteVariable(VP_TMC_Y_Step_Dis, TMC_Y_Step_buf_en, 32, true);
const char TMC_Z_Step_buf_en[] = "Z_SenSitivity";
dgusdisplay.WriteVariable(VP_TMC_Z_Step_Dis, TMC_Z_Step_buf_en, 32, true);
const char TMC_X_Current_buf_en[] = "X_Current";
dgusdisplay.WriteVariable(VP_TMC_X_Current_Dis, TMC_X_Current_buf_en, 32, true);
const char TMC_Y_Current_buf_en[] = "Y_Current";
dgusdisplay.WriteVariable(VP_TMC_Y_Current_Dis, TMC_Y_Current_buf_en, 32, true);
const char TMC_Z_Current_buf_en[] = "Z_Current";
dgusdisplay.WriteVariable(VP_TMC_Z_Current_Dis, TMC_Z_Current_buf_en, 32, true);
const char TMC_E0_Current_buf_en[] = "E0_Current";
dgusdisplay.WriteVariable(VP_TMC_E0_Current_Dis, TMC_E0_Current_buf_en, 32, true);
const char TMC_X1_Current_buf_en[] = "X1_Current";
dgusdisplay.WriteVariable(VP_TMC_X1_Current_Dis, TMC_X1_Current_buf_en, 32, true);
const char TMC_Y1_Current_buf_en[] = "Y1_Current";
dgusdisplay.WriteVariable(VP_TMC_Y1_Current_Dis, TMC_Y1_Current_buf_en, 32, true);
const char TMC_Z1_Current_buf_en[] = "Z1_Current";
dgusdisplay.WriteVariable(VP_TMC_Z1_Current_Dis, TMC_Z1_Current_buf_en, 32, true);
const char TMC_E1_Current_buf_en[] = "E1_Current";
dgusdisplay.WriteVariable(VP_TMC_E1_Current_Dis, TMC_E1_Current_buf_en, 32, true);
const char Min_Ex_Temp_buf_en[] = "Min_Ex_Temp";
dgusdisplay.WriteVariable(VP_Min_Ex_Temp_Dis, Min_Ex_Temp_buf_en, 32, true);
const char AutoLEVEL_INFO1_buf_en[] = "Please Press Button!";
dgusdisplay.WriteVariable(VP_AutoLEVEL_INFO1, AutoLEVEL_INFO1_buf_en, 32, true);
const char EX_TEMP_INFO2_buf_en[] = "Please wait a monent";
dgusdisplay.WriteVariable(VP_EX_TEMP_INFO2_Dis, EX_TEMP_INFO2_buf_en, 32, true);
const char EX_TEMP_INFO3_buf_en[] = "Cancle";
dgusdisplay.WriteVariable(VP_EX_TEMP_INFO3_Dis, EX_TEMP_INFO3_buf_en, 32, true);
const char PrintConfrim_Info_buf_en[] = "Start Print?";
dgusdisplay.WriteVariable(VP_PrintConfrim_Info_Dis, PrintConfrim_Info_buf_en, 32, true);
const char StopPrintConfrim_Info_buf_en[] = "Stop Print?";
dgusdisplay.WriteVariable(VP_StopPrintConfrim_Info_Dis, StopPrintConfrim_Info_buf_en, 32, true);
const char Printting_buf_en[] = "Printing";
dgusdisplay.WriteVariable(VP_Printting_Dis, Printting_buf_en, 32, true);
const char LCD_BLK_buf_en[] = "Backlight";
dgusdisplay.WriteVariable(VP_LCD_BLK_Dis, LCD_BLK_buf_en, 32, true);
}
else if (var == MKS_SimpleChinese) {
uint16_t home_buf_ch[] = { 0xF7D6, 0xB3D2 };
dgusdisplay.WriteVariable(VP_HOME_Dis, home_buf_ch, 4, true);
const uint16_t Setting_Dis[] = { 0xE8C9, 0xC3D6, 0x2000, 0x2000, 0x2000 };
dgusdisplay.WriteVariable(VP_Setting_Dis, Setting_Dis, 7, true);
const uint16_t Tool_Dis[] = { 0xA4B9, 0xDFBE };
dgusdisplay.WriteVariable(VP_Tool_Dis, Tool_Dis, 4, true);
const uint16_t Print_buf_ch[] = { 0xF2B4, 0xA1D3, 0x2000 };
dgusdisplay.WriteVariable(VP_Print_Dis, Print_buf_ch, 6, true);
const uint16_t Language_buf_ch[] = { 0xEFD3, 0xD4D1, 0x2000, 0x2000 };
dgusdisplay.WriteVariable(VP_Language_Dis, Language_buf_ch, 8, true);
const uint16_t About_buf_ch[] = { 0xD8B9, 0xDAD3, 0x2000 };
dgusdisplay.WriteVariable(VP_About_Dis, About_buf_ch, 6, true);
const uint16_t Config_buf_ch[] = { 0xE4C5, 0xC3D6, 0x2000 };
dgusdisplay.WriteVariable(VP_Config_Dis, Config_buf_ch, 6, true);
const uint16_t MotorConfig_buf_ch[] = { 0xE7B5, 0xFABB, 0xE4C5, 0xC3D6, 0x2000 };
dgusdisplay.WriteVariable(VP_MotorConfig_Dis, MotorConfig_buf_ch, 12, true);
const uint16_t LevelConfig_buf_ch[] = { 0xD6CA, 0xAFB6, 0xF7B5, 0xBDC6, 0xE8C9, 0xC3D6, 0x2000 };
dgusdisplay.WriteVariable(VP_LevelConfig_Dis, LevelConfig_buf_ch, 32, true);
const uint16_t TemperatureConfig_buf_ch[] = { 0xC2CE, 0xC8B6, 0x2000 };
dgusdisplay.WriteVariable(VP_TemperatureConfig_Dis, TemperatureConfig_buf_ch, 11, true);
const uint16_t Advance_buf_ch[] = { 0xDFB8, 0xB6BC, 0xE8C9, 0xC3D6, 0x2000 };
dgusdisplay.WriteVariable(VP_Advance_Dis, Advance_buf_ch, 16, true);
const uint16_t Filament_buf_ch[] = { 0xB7BC, 0xF6B3, 0x2000 };
dgusdisplay.WriteVariable(VP_Filament_Dis, Filament_buf_ch, 8, true);
const uint16_t Move_buf_ch[] = { 0xC6D2, 0xAFB6, 0x2000 };
dgusdisplay.WriteVariable(VP_Move_Dis, Move_buf_ch, 4, true);
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
const uint16_t Level_buf_ch[] = { 0xD4D7, 0xAFB6, 0xF7B5, 0xBDC6, 0x2000 };
dgusdisplay.WriteVariable(VP_Level_Dis, Level_buf_ch, 32, true);
#elif ENABLED(MESH_BED_LEVELING)
const uint16_t Level_buf_ch[] = { 0xF8CD, 0xF1B8, 0xF7B5, 0xBDC6, 0x2000 };
dgusdisplay.WriteVariable(VP_Level_Dis, Level_buf_ch, 32, true);
#else
const uint16_t Level_buf_ch[] = { 0xD6CA, 0xAFB6, 0xF7B5, 0xBDC6, 0x2000 };
dgusdisplay.WriteVariable(VP_Level_Dis, Level_buf_ch, 32, true);
#endif
const uint16_t MotorPluse_buf_ch[] = { 0xF6C2, 0xE5B3, 0x2000 };
dgusdisplay.WriteVariable(VP_MotorPluse_Dis, MotorPluse_buf_ch, 16, true);
const uint16_t MotorMaxSpeed_buf_ch[] = { 0xEED7, 0xF3B4, 0xD9CB, 0xC8B6, 0x2000 };
dgusdisplay.WriteVariable(VP_MotorMaxSpeed_Dis, MotorMaxSpeed_buf_ch, 16, true);
const uint16_t MotorMaxAcc_buf_ch[] = { 0xEED7, 0xF3B4, 0xD3BC, 0xD9CB, 0xC8B6, 0x2000 };
dgusdisplay.WriteVariable(VP_MotorMaxAcc_Dis, MotorMaxAcc_buf_ch, 16, true);
const uint16_t TravelAcc_buf_ch[] = { 0xD5BF, 0xD0D0, 0xD3BC, 0xD9CB, 0xC8B6, 0x2000 };
dgusdisplay.WriteVariable(VP_TravelAcc_Dis, TravelAcc_buf_ch, 16, true);
const uint16_t FeedRateMin_buf_ch[] = { 0xEED7, 0xA1D0, 0xD9CB, 0xC8B6, 0x2000 };
dgusdisplay.WriteVariable(VP_FeedRateMin_Dis, FeedRateMin_buf_ch, 12, true);
const uint16_t TravelFeeRateMin_buf_ch[] = { 0xD5BF, 0xD0D0, 0xEED7, 0xA1D0, 0xD9CB, 0xC8B6, 0x2000 };
dgusdisplay.WriteVariable(VP_TravelFeeRateMin_Dis, TravelFeeRateMin_buf_ch, 24, true);
const uint16_t Acc_buf_ch[] = { 0xD3BC, 0xD9CB, 0xC8B6, 0x2000 };
dgusdisplay.WriteVariable(VP_ACC_Dis, Acc_buf_ch, 16, true);
const uint16_t Point_One_buf_ch[] = { 0xDAB5, 0xBBD2, 0xE3B5, 0x2000 };
dgusdisplay.WriteVariable(VP_Point_One_Dis, Point_One_buf_ch, 12, true);
const uint16_t Point_Two_buf_ch[] = { 0xDAB5, 0xFEB6, 0xE3B5, 0x2000 };
dgusdisplay.WriteVariable(VP_Point_Two_Dis, Point_Two_buf_ch, 12, true);
const uint16_t Point_Three_buf_ch[] = { 0xDAB5, 0xFDC8, 0xE3B5, 0x2000 };
dgusdisplay.WriteVariable(VP_Point_Three_Dis, Point_Three_buf_ch, 12, true);
const uint16_t Point_Four_buf_ch[] = { 0xDAB5, 0xC4CB, 0xE3B5, 0x2000 };
dgusdisplay.WriteVariable(VP_Point_Four_Dis, Point_Four_buf_ch, 12, true);
const uint16_t Point_Five_buf_ch[] = { 0xDAB5, 0xE5CE, 0xE3B5, 0x2000 };
dgusdisplay.WriteVariable(VP_Point_Five_Dis, Point_Five_buf_ch, 12, true);
const uint16_t Extrusion_buf_ch[] = { 0xB7BC, 0xF6B3, 0xB7CD, 0x2000 };
dgusdisplay.WriteVariable(VP_Extrusion_Dis, Extrusion_buf_ch, 12, true);
const uint16_t HeatBed_buf_ch[] = { 0xC8C8, 0xB2B4, 0x2000 };
dgusdisplay.WriteVariable(VP_HeatBed_Dis, HeatBed_buf_ch, 12, true);
const uint16_t FactoryDefaults_buf_ch[] = { 0xD6BB, 0xB4B8, 0xF6B3, 0xA7B3, 0xE8C9, 0xC3D6, 0x2000 };
dgusdisplay.WriteVariable(VP_FactoryDefaults_Dis, FactoryDefaults_buf_ch, 16, true);
const uint16_t StoreSetting_buf_ch[] = { 0xA3B1, 0xE6B4, 0xE8C9, 0xC3D6, 0x2000 };
dgusdisplay.WriteVariable(VP_StoreSetting_Dis, StoreSetting_buf_ch, 16, true);
const uint16_t PrintPauseConfig_buf_ch[] = { 0xDDD4, 0xA3CD, 0xBBCE, 0xC3D6, 0x2000 };
dgusdisplay.WriteVariable(VP_PrintPauseConfig_Dis, PrintPauseConfig_buf_ch, 32, true);
const uint16_t X_Pluse_buf_ch[] = { 0x2058, 0xE1D6, 0xF6C2, 0xE5B3, 0x2000 };
dgusdisplay.WriteVariable(VP_X_Pluse_Dis, X_Pluse_buf_ch, 16, true);
const uint16_t Y_Pluse_buf_ch[] = { 0x2059, 0xE1D6, 0xF6C2, 0xE5B3, 0x2000 };
dgusdisplay.WriteVariable(VP_Y_Pluse_Dis, Y_Pluse_buf_ch, 16, true);
const uint16_t Z_Pluse_buf_ch[] = { 0x205A, 0xE1D6, 0xF6C2, 0xE5B3, 0x2000 };
dgusdisplay.WriteVariable(VP_Z_Pluse_Dis, Z_Pluse_buf_ch, 16, true);
const uint16_t E0_Pluse_buf_ch[] = { 0x3045, 0xE1D6, 0xF6C2, 0xE5B3, 0x2000 };
dgusdisplay.WriteVariable(VP_E0_Pluse_Dis, E0_Pluse_buf_ch, 16, true);
const uint16_t E1_Pluse_buf_ch[] = { 0x3145, 0xE1D6, 0xF6C2, 0xE5B3, 0x2000 };
dgusdisplay.WriteVariable(VP_E1_Pluse_Dis, E1_Pluse_buf_ch, 16, true);
const uint16_t X_Max_Speed_buf_ch[] = { 0x2058, 0xEED7, 0xF3B4, 0xD9CB, 0xC8B6, 0x2000 };
dgusdisplay.WriteVariable(VP_X_Max_Speed_Dis, X_Max_Speed_buf_ch, 16, true);
const uint16_t Y_Max_Speed_buf_ch[] = { 0x2059, 0xEED7, 0xF3B4, 0xD9CB, 0xC8B6, 0x2000 };
dgusdisplay.WriteVariable(VP_Y_Max_Speed_Dis, Y_Max_Speed_buf_ch, 16, true);
const uint16_t Z_Max_Speed_buf_ch[] = { 0x205A, 0xEED7, 0xF3B4, 0xD9CB, 0xC8B6, 0x2000 };
dgusdisplay.WriteVariable(VP_Z_Max_Speed_Dis, Z_Max_Speed_buf_ch, 16, true);
const uint16_t E0_Max_Speed_buf_ch[] = { 0x3045, 0xEED7, 0xF3B4, 0xD9CB, 0xC8B6, 0x2000 };
dgusdisplay.WriteVariable(VP_E0_Max_Speed_Dis, E0_Max_Speed_buf_ch, 16, true);
const uint16_t E1_Max_Speed_buf_ch[] = { 0x3145, 0xEED7, 0xF3B4, 0xD9CB, 0xC8B6, 0x2000 };
dgusdisplay.WriteVariable(VP_E1_Max_Speed_Dis, E1_Max_Speed_buf_ch, 16, true);
const uint16_t X_Max_Acc_Speed_buf_ch[] = { 0x2058, 0xEED7, 0xF3B4, 0xD3BC, 0xD9CB, 0xC8B6, 0x2000 };
dgusdisplay.WriteVariable(VP_X_Max_Acc_Speed_Dis, X_Max_Acc_Speed_buf_ch, 16, true);
const uint16_t Y_Max_Acc_Speed_buf_ch[] = { 0x2059, 0xEED7, 0xF3B4, 0xD3BC, 0xD9CB, 0xC8B6, 0x2000 };
dgusdisplay.WriteVariable(VP_Y_Max_Acc_Speed_Dis, Y_Max_Acc_Speed_buf_ch, 16, true);
const uint16_t Z_Max_Acc_Speed_buf_ch[] = { 0x205A, 0xEED7, 0xF3B4, 0xD3BC, 0xD9CB, 0xC8B6, 0x2000 };
dgusdisplay.WriteVariable(VP_Z_Max_Acc_Speed_Dis, Z_Max_Acc_Speed_buf_ch, 16, true);
const uint16_t E0_Max_Acc_Speed_buf_ch[] = { 0x3045, 0xEED7, 0xF3B4, 0xD3BC, 0xD9CB, 0xC8B6, 0x2000 };
dgusdisplay.WriteVariable(VP_E0_Max_Acc_Speed_Dis, E0_Max_Acc_Speed_buf_ch, 16, true);
const uint16_t E1_Max_Acc_Speed_buf_ch[] = { 0x3145, 0xEED7, 0xF3B4, 0xD3BC, 0xD9CB, 0xC8B6, 0x2000 };
dgusdisplay.WriteVariable(VP_E1_Max_Acc_Speed_Dis, E1_Max_Acc_Speed_buf_ch, 16, true);
const uint16_t X_PARK_POS_buf_ch[] = { 0x2058, 0xDDD4, 0xA3CD, 0xBBCE, 0xC3D6, 0x2000 };
dgusdisplay.WriteVariable(VP_X_PARK_POS_Dis, X_PARK_POS_buf_ch, 16, true);
const uint16_t Y_PARK_POS_buf_ch[] = { 0x2059, 0xDDD4, 0xA3CD, 0xBBCE, 0xC3D6, 0x2000 };
dgusdisplay.WriteVariable(VP_Y_PARK_POS_Dis, Y_PARK_POS_buf_ch, 16, true);
const uint16_t Z_PARK_POS_buf_ch[] = { 0x205A, 0xDDD4, 0xA3CD, 0xBBCE, 0xC3D6, 0x2000 };
dgusdisplay.WriteVariable(VP_Z_PARK_POS_Dis, Z_PARK_POS_buf_ch, 16, true);
const uint16_t Length_buf_ch[] = { 0xBDB2, 0xA4B3, 0x2000 };
dgusdisplay.WriteVariable(VP_Length_Dis, Length_buf_ch, 8, true);
const uint16_t Speed_buf_ch[] = { 0xD9CB, 0xC8B6, 0x2000 };
dgusdisplay.WriteVariable(VP_Speed_Dis, Speed_buf_ch, 8, true);
const uint16_t InOut_buf_ch[] = { 0xF8BD, 0xF6B3, 0x2000 };
dgusdisplay.WriteVariable(VP_InOut_Dis, InOut_buf_ch, 8, true);
const uint16_t PrintTimet_buf_en[] = { 0xF2B4, 0xA1D3, 0xB1CA, 0xE4BC, 0x2000 };
dgusdisplay.WriteVariable(VP_PrintTime_Dis, PrintTimet_buf_en, 16, true);
const uint16_t E0_Temp_buf_ch[] = { 0x3045, 0xC2CE, 0xC8B6, 0x2000 };
dgusdisplay.WriteVariable(VP_E0_Temp_Dis, E0_Temp_buf_ch, 16, true);
const uint16_t E1_Temp_buf_ch[] = { 0x3145, 0xC2CE, 0xC8B6, 0x2000 };
dgusdisplay.WriteVariable(VP_E1_Temp_Dis, E1_Temp_buf_ch, 16, true);
const uint16_t HB_Temp_buf_ch[] = { 0xC8C8, 0xB2B4, 0xC2CE, 0xC8B6, 0x2000 };
dgusdisplay.WriteVariable(VP_HB_Temp_Dis, HB_Temp_buf_ch, 16, true);
const uint16_t Feedrate_buf_ch[] = { 0xB7BC, 0xF6B3, 0xD9CB, 0xC8B6, 0x2000 };
dgusdisplay.WriteVariable(VP_Feedrate_Dis, Feedrate_buf_ch, 16, true);
const uint16_t PrintAcc_buf_ch[] = { 0xF2B4, 0xA1D3, 0xD9CB, 0xC8B6, 0x2000 };
dgusdisplay.WriteVariable(VP_PrintAcc_Dis, PrintAcc_buf_ch, 16, true);
const uint16_t FAN_Speed_buf_ch[] = { 0xE7B7, 0xC8C9, 0xD9CB, 0xC8B6, 0x2000 };
dgusdisplay.WriteVariable(VP_Fan_Speed_Dis, FAN_Speed_buf_ch, 16, true);
const uint16_t Printing_buf_ch[] = { 0xF2B4, 0xA1D3, 0xD0D6, 0x2000 };
dgusdisplay.WriteVariable(VP_Printing_Dis, Printing_buf_ch, 16, true);
const uint16_t Info_EEPROM_1_buf_ch[] = { 0xC7CA, 0xF1B7, 0xA3B1, 0xE6B4, 0xE8C9, 0xC3D6, 0xBFA3, 0x2000 };
dgusdisplay.WriteVariable(VP_Info_EEPROM_1_Dis, Info_EEPROM_1_buf_ch, 32, true);
const uint16_t Info_EEPROM_2_buf_ch[] = { 0xC7CA, 0xF1B7, 0xD6BB, 0xB4B8, 0xF6B3, 0xA7B3, 0xE8C9, 0xC3D6, 0xBFA3, 0x2000 };
dgusdisplay.WriteVariable(VP_Info_EEPROM_2_Dis, Info_EEPROM_2_buf_ch, 32, true);
const uint16_t TMC_X_Step_buf_ch[] = { 0x2058, 0xE9C1, 0xF4C3, 0xC8B6, 0x2000 };
dgusdisplay.WriteVariable(VP_TMC_X_Step_Dis, TMC_X_Step_buf_ch, 16, true);
const uint16_t TMC_Y_Step_buf_ch[] = { 0x2059, 0xE9C1, 0xF4C3, 0xC8B6, 0x2000 };
dgusdisplay.WriteVariable(VP_TMC_Y_Step_Dis, TMC_Y_Step_buf_ch, 16, true);
const uint16_t TMC_Z_Step_buf_ch[] = { 0x205A, 0xE9C1, 0xF4C3, 0xC8B6, 0x2000 };
dgusdisplay.WriteVariable(VP_TMC_Z_Step_Dis, TMC_Z_Step_buf_ch, 16, true);
const uint16_t Info_PrinfFinsh_1_buf_ch[] = { 0xF2B4, 0xA1D3, 0xEACD, 0xC9B3, 0x2000 };
dgusdisplay.WriteVariable(VP_Info_PrinfFinsh_1_Dis, Info_PrinfFinsh_1_buf_ch, 32, true);
const uint16_t TMC_X_Current_buf_ch[] = { 0x2058, 0xE1D6, 0xE7B5, 0xF7C1, 0x2000 };
dgusdisplay.WriteVariable(VP_TMC_X_Current_Dis, TMC_X_Current_buf_ch, 16, true);
const uint16_t TMC_Y_Current_buf_ch[] = { 0x2059, 0xE1D6, 0xE7B5, 0xF7C1, 0x2000 };
dgusdisplay.WriteVariable(VP_TMC_Y_Current_Dis, TMC_Y_Current_buf_ch, 16, true);
const uint16_t TMC_Z_Current_buf_ch[] = { 0x205A, 0xE1D6, 0xE7B5, 0xF7C1, 0x2000 };
dgusdisplay.WriteVariable(VP_TMC_Z_Current_Dis, TMC_Z_Current_buf_ch, 16, true);
const uint16_t TMC_E0_Current_buf_ch[] = { 0x3045, 0xE1D6, 0xE7B5, 0xF7C1, 0x2000 };
dgusdisplay.WriteVariable(VP_TMC_E0_Current_Dis, TMC_E0_Current_buf_ch, 16, true);
const uint16_t TMC_X1_Current_buf_ch[] = { 0x3158, 0xE1D6, 0xE7B5, 0xF7C1, 0x2000 };
dgusdisplay.WriteVariable(VP_TMC_X1_Current_Dis, TMC_X1_Current_buf_ch, 16, true);
const uint16_t TMC_Y1_Current_buf_ch[] = { 0x3159, 0xE1D6, 0xE7B5, 0xF7C1, 0x2000 };
dgusdisplay.WriteVariable(VP_TMC_Y1_Current_Dis, TMC_Y1_Current_buf_ch, 16, true);
const uint16_t TMC_Z1_Current_buf_ch[] = { 0x315A, 0xE1D6, 0xE7B5, 0xF7C1, 0x2000 };
dgusdisplay.WriteVariable(VP_TMC_Z1_Current_Dis, TMC_Z1_Current_buf_ch, 16, true);
const uint16_t TMC_E1_Current_buf_ch[] = { 0x3145, 0xE1D6, 0xE7B5, 0xF7C1, 0x2000 };
dgusdisplay.WriteVariable(VP_TMC_E1_Current_Dis, TMC_E1_Current_buf_ch, 16, true);
const uint16_t Min_Ex_Temp_buf_ch[] = { 0xEED7, 0xA1D0, 0xB7BC, 0xF6B3, 0xC2CE, 0xC8B6, 0x2000 };
dgusdisplay.WriteVariable(VP_Min_Ex_Temp_Dis, Min_Ex_Temp_buf_ch, 32, true);
const uint16_t AutoLEVEL_INFO1_buf_ch[] = { 0xEBC7, 0xB4B0, 0xC2CF, 0xB4B0, 0xA5C5, 0x2000 };
dgusdisplay.WriteVariable(VP_AutoLEVEL_INFO1, AutoLEVEL_INFO1_buf_ch, 32, true);
const uint16_t EX_TEMP_INFO2_buf_ch[] = { 0xEBC7, 0xD4C9, 0xC8B5, 0x2000 };
dgusdisplay.WriteVariable(VP_EX_TEMP_INFO2_Dis, EX_TEMP_INFO2_buf_ch, 32, true);
const uint16_t EX_TEMP_INFO3_buf_ch[] = { 0xA1C8, 0xFBCF, 0xD3BC, 0xC8C8, 0x2000 };
dgusdisplay.WriteVariable(VP_EX_TEMP_INFO3_Dis, EX_TEMP_INFO3_buf_ch, 32, true);
const uint16_t PrintConfrim_Info_buf_ch[] = { 0xC7CA, 0xF1B7, 0xAABF, 0xBCCA, 0xF2B4, 0xA1D3, 0x2000 };
dgusdisplay.WriteVariable(VP_PrintConfrim_Info_Dis, PrintConfrim_Info_buf_ch, 32, true);
const uint16_t StopPrintConfrim_Info_buf_ch[] = { 0xC7CA, 0xF1B7, 0xA3CD, 0xB9D6, 0xF2B4, 0xA1D3, 0x2000 };
dgusdisplay.WriteVariable(VP_StopPrintConfrim_Info_Dis, StopPrintConfrim_Info_buf_ch, 32, true);
const uint16_t Printting_buf_ch[] = { 0xF2B4, 0xA1D3, 0xD0D6, 0x2000 };
dgusdisplay.WriteVariable(VP_Printting_Dis, Printting_buf_ch, 32, true);
const uint16_t LCD_BLK_buf_ch[] = { 0xB3B1, 0xE2B9, 0xE8C9, 0xC3D6, 0x2000 };
dgusdisplay.WriteVariable(VP_LCD_BLK_Dis, LCD_BLK_buf_ch, 32, true);
}
}
#endif // DGUS_LCD_UI_MKS