Marlin_FB4S/Marlin/language_da.h


								/**

								 * Marlin 3D Printer Firmware

								 * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]

								 *

								 * Based on Sprinter and grbl.

								 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm

								 *

								 * This program is free software: you can redistribute it and/or modify

								 * it under the terms of the GNU General Public License as published by

								 * the Free Software Foundation, either version 3 of the License, or

								 * (at your option) any later version.

								 *

								 * This program is distributed in the hope that it will be useful,

								 * but WITHOUT ANY WARRANTY; without even the implied warranty of

								 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

								 * GNU General Public License for more details.

								 *

								 * You should have received a copy of the GNU General Public License

								 * along with this program.  If not, see <http://www.gnu.org/licenses/>.

								 *

								 */


								/**

								 * Danish

								 *

								 * LCD Menu Messages

								 * See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language

								 *

								 */

								#ifndef LANGUAGE_DA_H

								#define LANGUAGE_DA_H


								#define MAPPER_C2C3

								// Define SIMULATE_ROMFONT to see what is seen on the character based display defined in Configuration.h

								//#define SIMULATE_ROMFONT

								#define DISPLAY_CHARSET_ISO10646_1


								#define WELCOME_MSG                         MACHINE_NAME " er klar"

								#define MSG_SD_INSERTED                     "Kort isat"

								#define MSG_SD_REMOVED                      "Kort fjernet"

								#define MSG_LCD_ENDSTOPS                    "Endstops" // Max length 8 characters

								#define MSG_MAIN                            "Menu"

								#define MSG_AUTOSTART                       "Autostart"

								#define MSG_DISABLE_STEPPERS                "Slå alle steppere fra"

								#define MSG_AUTO_HOME                       "Auto Home" // G28

								#define MSG_AUTO_HOME_X                     "Home X"

								#define MSG_AUTO_HOME_Y                     "Home Y"

								#define MSG_AUTO_HOME_Z                     "Home Z"

								#define MSG_LEVEL_BED_HOMING                "Homing XYZ"

								#define MSG_LEVEL_BED_WAITING               "Tryk for at starte bed level"

								#define MSG_LEVEL_BED_NEXT_POINT            "Næste punkt"

								#define MSG_LEVEL_BED_DONE                  "Bed level er færdig!"

								#define MSG_LEVEL_BED_CANCEL                "Annuller bed level"

								#define MSG_SET_HOME_OFFSETS                "Sæt forskyding af home"

								#define MSG_HOME_OFFSETS_APPLIED            "Forskydninger af home pos. er tilføjet"

								#define MSG_SET_ORIGIN                      "Sæt origin"

								#define MSG_PREHEAT_1                       "Forvarm PLA"

								#define MSG_PREHEAT_1_N                     "Forvarm PLA "

								#define MSG_PREHEAT_1_ALL                   "Forvarm PLA Alle"

								#define MSG_PREHEAT_1_BEDONLY               "Forvarm PLA Bed"

								#define MSG_PREHEAT_1_SETTINGS              "Forvarm PLA conf"

								#define MSG_PREHEAT_2                       "Forvarm ABS"

								#define MSG_PREHEAT_2_N                     "Forvarm ABS "

								#define MSG_PREHEAT_2_ALL                   "Forvarm ABS Alle"

								#define MSG_PREHEAT_2_BEDONLY               "Forvarm ABS Bed"

								#define MSG_PREHEAT_2_SETTINGS              "Forvarm ABS conf"

								#define MSG_COOLDOWN                        "Afkøl"

								#define MSG_SWITCH_PS_ON                    "Slå strøm til"

								#define MSG_SWITCH_PS_OFF                   "Slå strøm fra"

								#define MSG_EXTRUDE                         "Extruder"

								#define MSG_RETRACT                         "Retract"

								#define MSG_MOVE_AXIS                       "Flyt akser"

								#define MSG_LEVEL_BED                       "Juster bed"

								#define MSG_MOVE_X                          "Flyt X"

								#define MSG_MOVE_Y                          "Flyt Y"

								#define MSG_MOVE_Z                          "Flyt Z"

								#define MSG_MOVE_E                          "Extruder"

								#define MSG_MOVE_01MM                       "Flyt 0.1mm"

								#define MSG_MOVE_1MM                        "Flyt 1mm"

								#define MSG_MOVE_10MM                       "Flyt 10mm"

								#define MSG_SPEED                           "Hastighed"

								#define MSG_BED_Z                           "Plade Z"

								#define MSG_NOZZLE                          "Dyse"

								#define MSG_BED                             "Plade"

								#define MSG_FAN_SPEED                       "Blæser hastighed"

								#define MSG_FLOW                            "Flow"

								#define MSG_CONTROL                         "Kontrol"

								#define MSG_MIN                             " \002 Min"

								#define MSG_MAX                             " \002 Max"

								#define MSG_FACTOR                          " \002 Fact"

								#define MSG_AUTOTEMP                        "Autotemp"

								#define MSG_ON                              "Til "

								#define MSG_OFF                             "Fra"

								#define MSG_PID_P                           "PID-P"

								#define MSG_PID_I                           "PID-I"

								#define MSG_PID_D                           "PID-D"

								#define MSG_PID_C                           "PID-C"

								#define MSG_ACC                             "Accel"

								#define MSG_VXY_JERK                        "Vxy-jerk"

								#define MSG_VZ_JERK                         "Vz-jerk"

								#define MSG_VE_JERK                         "Ve-jerk"

								#define MSG_VMAX                            "Vmax "

								#define MSG_VMIN                            "Vmin"

								#define MSG_VTRAV_MIN                       "VTrav min"

								#define MSG_AMAX                            "Amax "

								#define MSG_A_RETRACT                       "A-retract"

								#define MSG_A_TRAVEL                        "A-rejse"

								#define MSG_XSTEPS                          "Xsteps/mm"

								#define MSG_YSTEPS                          "Ysteps/mm"

								#define MSG_ZSTEPS                          "Zsteps/mm"

								#define MSG_ESTEPS                          "Esteps/mm"

								#define MSG_TEMPERATURE                     "Temperatur"

								#define MSG_MOTION                          "Bevægelse"

								#define MSG_VOLUMETRIC                      "Filament"

								#define MSG_VOLUMETRIC_ENABLED              "E in mm3"

								#define MSG_FILAMENT_DIAM                   "Fil. Dia."

								#define MSG_CONTRAST                        "LCD kontrast"

								#define MSG_STORE_EPROM                     "Gem i EEPROM"

								#define MSG_LOAD_EPROM                      "Hent fra EEPROM"

								#define MSG_RESTORE_FAILSAFE                "Gendan failsafe"

								#define MSG_REFRESH                         "Genopfrisk"

								#define MSG_WATCH                           "Info skærm"

								#define MSG_PREPARE                         "Forbered"

								#define MSG_TUNE                            "Tune"

								#define MSG_PAUSE_PRINT                     "Pause printet"

								#define MSG_RESUME_PRINT                    "Forsæt printet"

								#define MSG_STOP_PRINT                      "Stop printet"

								#define MSG_CARD_MENU                       "Print fra SD"

								#define MSG_NO_CARD                         "Intet SD kort"

								#define MSG_DWELL                           "Dvale..."

								#define MSG_USERWAIT                        "Venter på bruger..."

								#define MSG_RESUMING                        "Forsætter printet"

								#define MSG_PRINT_ABORTED                   "Print annulleret"

								#define MSG_NO_MOVE                         "Ingen bevægelse."

								#define MSG_KILLED                          "DRÆBT. "

								#define MSG_STOPPED                         "STOPPET. "

								#define MSG_CONTROL_RETRACT                 "Tilbagetræk mm"

								#define MSG_CONTROL_RETRACT_SWAP            "Skift Re.mm"

								#define MSG_CONTROL_RETRACTF                "Tilbagetræk V"

								#define MSG_CONTROL_RETRACT_ZLIFT           "Hop mm"

								#define MSG_CONTROL_RETRACT_RECOVER         "UnRet +mm"

								#define MSG_CONTROL_RETRACT_RECOVER_SWAP    "S UnRet+mm"

								#define MSG_CONTROL_RETRACT_RECOVERF        "UnRet  V"

								#define MSG_AUTORETRACT                     "AutoRetr."

								#define MSG_FILAMENTCHANGE                  "Skift filament"

								#define MSG_INIT_SDCARD                     "Init. SD card"

								#define MSG_CNG_SDCARD                      "Skift SD kort"

								#define MSG_ZPROBE_OUT                      "Probe udenfor plade"

								#define MSG_HOME                            "Home"  // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST

								#define MSG_FIRST                           "first"

								#define MSG_ZPROBE_ZOFFSET                  "Z Offset"

								#define MSG_BABYSTEP_X                      "Babystep X"

								#define MSG_BABYSTEP_Y                      "Babystep Y"

								#define MSG_BABYSTEP_Z                      "Babystep Z"

								#define MSG_ENDSTOP_ABORT                   "Endstop abort"

								#define MSG_HEATING_FAILED_LCD              "Opvarmning mislykkedes"

								#define MSG_ERR_REDUNDANT_TEMP              "Fejl: reserve temp"

								#define MSG_THERMAL_RUNAWAY                 "Temp løber løbsk"

								#define MSG_ERR_MAXTEMP                     "Fejl: Maks temp"

								#define MSG_ERR_MINTEMP                     "Fejl: Min temp"

								#define MSG_ERR_MAXTEMP_BED                 "Fejl: Maks Plsde temp"

								#define MSG_ERR_MINTEMP_BED                 "Fejl: Min Plade temp"

								#define MSG_HEATING                         "Opvarmer..."

								#define MSG_HEATING_COMPLETE                "Opvarmet"

								#define MSG_BED_HEATING                     "Opvarmer plade"

								#define MSG_BED_DONE                        "Plade opvarmet"

								#define MSG_DELTA_CALIBRATE                 "Delta Kalibrering"

								#define MSG_DELTA_CALIBRATE_X               "Kalibrer X"

								#define MSG_DELTA_CALIBRATE_Y               "Kalibrer Y"

								#define MSG_DELTA_CALIBRATE_Z               "Kalibrer Z"

								#define MSG_DELTA_CALIBRATE_CENTER          "Kalibrerings Center"


								#endif // LANGUAGE_DA_H