You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
578 lines
46 KiB
578 lines
46 KiB
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
#pragma once
|
|
|
|
/**
|
|
* Polish - includes accented characters
|
|
*
|
|
* LCD Menu Messages
|
|
* See also http://marlinfw.org/docs/development/lcd_language.html
|
|
*
|
|
*/
|
|
|
|
#define DISPLAY_CHARSET_ISO10646_PL
|
|
|
|
namespace Language_pl {
|
|
using namespace Language_en; // Inherit undefined strings from English
|
|
|
|
constexpr uint8_t CHARSIZE = 2;
|
|
PROGMEM Language_Str LANGUAGE = _UxGT("Polish");
|
|
|
|
PROGMEM Language_Str WELCOME_MSG = MACHINE_NAME _UxGT(" gotowy.");
|
|
PROGMEM Language_Str MSG_YES = _UxGT("TAK");
|
|
PROGMEM Language_Str MSG_NO = _UxGT("NIE");
|
|
PROGMEM Language_Str MSG_BACK = _UxGT("Wstecz");
|
|
PROGMEM Language_Str MSG_MEDIA_ABORTING = _UxGT("Przerywanie...");
|
|
PROGMEM Language_Str MSG_MEDIA_INSERTED = _UxGT("Karta włożona");
|
|
PROGMEM Language_Str MSG_MEDIA_REMOVED = _UxGT("Karta usunięta");
|
|
PROGMEM Language_Str MSG_MEDIA_RELEASED = _UxGT("Karta zwolniona");
|
|
PROGMEM Language_Str MSG_MEDIA_WAITING = _UxGT("Oczekiwanie na kartę");
|
|
PROGMEM Language_Str MSG_MEDIA_READ_ERROR = _UxGT("Bład odczytu karty");
|
|
PROGMEM Language_Str MSG_MEDIA_USB_REMOVED = _UxGT("Urządzenie USB usunięte");
|
|
PROGMEM Language_Str MSG_MEDIA_USB_FAILED = _UxGT("Błąd uruchomienia USB");
|
|
PROGMEM Language_Str MSG_LCD_ENDSTOPS = _UxGT("Krańców."); // Max length 8 characters
|
|
PROGMEM Language_Str MSG_LCD_SOFT_ENDSTOPS = _UxGT("Progr. Krańcówki");
|
|
PROGMEM Language_Str MSG_MAIN = _UxGT("Menu główne");
|
|
PROGMEM Language_Str MSG_ADVANCED_SETTINGS = _UxGT("Ustawienie zaawansowane");
|
|
PROGMEM Language_Str MSG_CONFIGURATION = _UxGT("Konfiguracja");
|
|
PROGMEM Language_Str MSG_AUTOSTART = _UxGT("Autostart");
|
|
PROGMEM Language_Str MSG_DISABLE_STEPPERS = _UxGT("Wyłącz silniki");
|
|
PROGMEM Language_Str MSG_DEBUG_MENU = _UxGT("Menu Debugowania");
|
|
PROGMEM Language_Str MSG_PROGRESS_BAR_TEST = _UxGT("Testowy pasek postępu");
|
|
PROGMEM Language_Str MSG_AUTO_HOME = _UxGT("Pozycja zerowa");
|
|
PROGMEM Language_Str MSG_AUTO_HOME_X = _UxGT("Zeruj X");
|
|
PROGMEM Language_Str MSG_AUTO_HOME_Y = _UxGT("Zeruj Y");
|
|
PROGMEM Language_Str MSG_AUTO_HOME_Z = _UxGT("Zeruj Z");
|
|
PROGMEM Language_Str MSG_AUTO_Z_ALIGN = _UxGT("Autowyrównanie Z");
|
|
PROGMEM Language_Str MSG_LEVEL_BED_HOMING = _UxGT("Pozycja zerowa");
|
|
PROGMEM Language_Str MSG_LEVEL_BED_WAITING = _UxGT("Kliknij by rozp.");
|
|
PROGMEM Language_Str MSG_LEVEL_BED_NEXT_POINT = _UxGT("Następny punkt");
|
|
PROGMEM Language_Str MSG_LEVEL_BED_DONE = _UxGT("Wypoziomowano!");
|
|
PROGMEM Language_Str MSG_Z_FADE_HEIGHT = _UxGT("Wys. zanikania");
|
|
PROGMEM Language_Str MSG_SET_HOME_OFFSETS = _UxGT("Ust. poz. zer.");
|
|
PROGMEM Language_Str MSG_HOME_OFFSETS_APPLIED = _UxGT("Poz. zerowa ust.");
|
|
PROGMEM Language_Str MSG_SET_ORIGIN = _UxGT("Ustaw punkt zero");
|
|
PROGMEM Language_Str MSG_PREHEAT_1 = _UxGT("Rozgrzej ") PREHEAT_1_LABEL;
|
|
PROGMEM Language_Str MSG_PREHEAT_1_H = _UxGT("Rozgrzej ") PREHEAT_1_LABEL " ~";
|
|
PROGMEM Language_Str MSG_PREHEAT_1_END = _UxGT("Rozgrzej ") PREHEAT_1_LABEL _UxGT(" Dysza");
|
|
PROGMEM Language_Str MSG_PREHEAT_1_END_E = _UxGT("Rozgrzej ") PREHEAT_1_LABEL _UxGT(" Dysza ~");
|
|
PROGMEM Language_Str MSG_PREHEAT_1_ALL = _UxGT("Rozgrzej ") PREHEAT_1_LABEL _UxGT(" wsz.");
|
|
PROGMEM Language_Str MSG_PREHEAT_1_BEDONLY = _UxGT("Rozgrzej ") PREHEAT_1_LABEL _UxGT(" stół");
|
|
PROGMEM Language_Str MSG_PREHEAT_1_SETTINGS = _UxGT("Rozgrzej ") PREHEAT_1_LABEL _UxGT(" ustaw.");
|
|
PROGMEM Language_Str MSG_PREHEAT_2 = _UxGT("Rozgrzej ") PREHEAT_2_LABEL;
|
|
PROGMEM Language_Str MSG_PREHEAT_2_H = _UxGT("Rozgrzej ") PREHEAT_2_LABEL " ~";
|
|
PROGMEM Language_Str MSG_PREHEAT_2_END = _UxGT("Rozgrzej ") PREHEAT_2_LABEL _UxGT(" Dysza");
|
|
PROGMEM Language_Str MSG_PREHEAT_2_END_E = _UxGT("Rozgrzej ") PREHEAT_2_LABEL _UxGT(" Dysza ~");
|
|
PROGMEM Language_Str MSG_PREHEAT_2_ALL = _UxGT("Rozgrzej ") PREHEAT_2_LABEL _UxGT(" wsz.");
|
|
PROGMEM Language_Str MSG_PREHEAT_2_BEDONLY = _UxGT("Rozgrzej ") PREHEAT_2_LABEL _UxGT(" stół");
|
|
PROGMEM Language_Str MSG_PREHEAT_2_SETTINGS = _UxGT("Rozgrzej ") PREHEAT_2_LABEL _UxGT(" ustaw.");
|
|
PROGMEM Language_Str MSG_PREHEAT_CUSTOM = _UxGT("Rozgrzej własne ust.");
|
|
PROGMEM Language_Str MSG_COOLDOWN = _UxGT("Chłodzenie");
|
|
PROGMEM Language_Str MSG_LASER_MENU = _UxGT("Sterowanie Lasera");
|
|
PROGMEM Language_Str MSG_LASER_OFF = _UxGT("Wyłącz Laser");
|
|
PROGMEM Language_Str MSG_LASER_ON = _UxGT("Włącz Laser");
|
|
PROGMEM Language_Str MSG_LASER_POWER = _UxGT("Zasilanie Lasera");
|
|
PROGMEM Language_Str MSG_SPINDLE_MENU = _UxGT("Sterowanie wrzeciona");
|
|
PROGMEM Language_Str MSG_SPINDLE_OFF = _UxGT("Wyłącz wrzeciono");
|
|
PROGMEM Language_Str MSG_SPINDLE_ON = _UxGT("Włącz wrzeciono");
|
|
PROGMEM Language_Str MSG_SPINDLE_POWER = _UxGT("Zasilanie wrzeciona");
|
|
PROGMEM Language_Str MSG_SPINDLE_REVERSE = _UxGT("Rewers wrzeciona");
|
|
PROGMEM Language_Str MSG_SWITCH_PS_ON = _UxGT("Włącz zasilacz");
|
|
PROGMEM Language_Str MSG_SWITCH_PS_OFF = _UxGT("Wyłącz zasilacz");
|
|
PROGMEM Language_Str MSG_EXTRUDE = _UxGT("Ekstruzja");
|
|
PROGMEM Language_Str MSG_RETRACT = _UxGT("Wycofanie");
|
|
PROGMEM Language_Str MSG_MOVE_AXIS = _UxGT("Ruch osi");
|
|
PROGMEM Language_Str MSG_BED_LEVELING = _UxGT("Poziomowanie stołu");
|
|
PROGMEM Language_Str MSG_LEVEL_BED = _UxGT("Wypoziomuj stół");
|
|
PROGMEM Language_Str MSG_LEVEL_CORNERS = _UxGT("Narożniki poziomowania");
|
|
PROGMEM Language_Str MSG_NEXT_CORNER = _UxGT("Nastepny narożnik");
|
|
PROGMEM Language_Str MSG_MESH_EDITOR = _UxGT("Edytor siatki");
|
|
PROGMEM Language_Str MSG_EDIT_MESH = _UxGT("Edycja siatki");
|
|
PROGMEM Language_Str MSG_EDITING_STOPPED = _UxGT("Edycja siatki zatrzymana");
|
|
PROGMEM Language_Str MSG_PROBING_MESH = _UxGT("Punkt pomiarowy");
|
|
PROGMEM Language_Str MSG_MESH_X = _UxGT("Indeks X");
|
|
PROGMEM Language_Str MSG_MESH_Y = _UxGT("Indeks Y");
|
|
PROGMEM Language_Str MSG_MESH_EDIT_Z = _UxGT("Wartość Z");
|
|
PROGMEM Language_Str MSG_USER_MENU = _UxGT("Własne Polecenia");
|
|
PROGMEM Language_Str MSG_M48_TEST = _UxGT("M48 Test sondy");
|
|
PROGMEM Language_Str MSG_M48_POINT = _UxGT("M48 Punky");
|
|
PROGMEM Language_Str MSG_M48_DEVIATION = _UxGT("Odchylenie");
|
|
PROGMEM Language_Str MSG_IDEX_MENU = _UxGT("Tryb IDEX");
|
|
PROGMEM Language_Str MSG_OFFSETS_MENU = _UxGT("Przesunięcie narzędzia");
|
|
PROGMEM Language_Str MSG_IDEX_MODE_AUTOPARK = _UxGT("Auto-Parkowanie");
|
|
PROGMEM Language_Str MSG_IDEX_MODE_DUPLICATE = _UxGT("Duplikowanie");
|
|
PROGMEM Language_Str MSG_IDEX_MODE_MIRRORED_COPY = _UxGT("Kopia lustrzana");
|
|
PROGMEM Language_Str MSG_IDEX_MODE_FULL_CTRL = _UxGT("Pełne sterowanie");
|
|
PROGMEM Language_Str MSG_HOTEND_OFFSET_X = _UxGT("2ga dysza X");
|
|
PROGMEM Language_Str MSG_HOTEND_OFFSET_Y = _UxGT("2ga dysza Y");
|
|
PROGMEM Language_Str MSG_HOTEND_OFFSET_Z = _UxGT("2ga dysza Z");
|
|
PROGMEM Language_Str MSG_UBL_DOING_G29 = _UxGT("Wykonywanie G29");
|
|
PROGMEM Language_Str MSG_UBL_TOOLS = _UxGT("Narzędzia UBL");
|
|
PROGMEM Language_Str MSG_UBL_LEVEL_BED = _UxGT("Unified Bed Leveling");
|
|
PROGMEM Language_Str MSG_LCD_TILTING_MESH = _UxGT("Punkt pochylenia");
|
|
PROGMEM Language_Str MSG_UBL_MANUAL_MESH = _UxGT("Ręczne Budowanie Siatki");
|
|
PROGMEM Language_Str MSG_UBL_BC_INSERT = _UxGT("Umieść podkładkę i zmierz");
|
|
PROGMEM Language_Str MSG_UBL_BC_INSERT2 = _UxGT("Zmierz");
|
|
PROGMEM Language_Str MSG_UBL_BC_REMOVE = _UxGT("Usuń & Zmierz Stół");
|
|
PROGMEM Language_Str MSG_UBL_MOVING_TO_NEXT = _UxGT("Przesuwanie do następnego");
|
|
PROGMEM Language_Str MSG_UBL_ACTIVATE_MESH = _UxGT("Aktywacja UBL");
|
|
PROGMEM Language_Str MSG_UBL_DEACTIVATE_MESH = _UxGT("Dezaktywacja UBL");
|
|
PROGMEM Language_Str MSG_UBL_SET_TEMP_BED = _UxGT("Temperatura stołu");
|
|
PROGMEM Language_Str MSG_UBL_BED_TEMP_CUSTOM = _UxGT("Temperatura stołu");
|
|
PROGMEM Language_Str MSG_UBL_SET_TEMP_HOTEND = _UxGT("Temperatura dyszy");
|
|
PROGMEM Language_Str MSG_UBL_HOTEND_TEMP_CUSTOM = _UxGT("Temperatura dyszy");
|
|
PROGMEM Language_Str MSG_UBL_MESH_EDIT = _UxGT("Edycja siatki");
|
|
PROGMEM Language_Str MSG_UBL_EDIT_CUSTOM_MESH = _UxGT("Edycja własnej siatki");
|
|
PROGMEM Language_Str MSG_UBL_FINE_TUNE_MESH = _UxGT("Dostrajanie siatki");
|
|
PROGMEM Language_Str MSG_UBL_DONE_EDITING_MESH = _UxGT("Koniec edycji siati");
|
|
PROGMEM Language_Str MSG_UBL_BUILD_CUSTOM_MESH = _UxGT("Buduj własna siatkę");
|
|
PROGMEM Language_Str MSG_UBL_BUILD_MESH_MENU = _UxGT("Buduj siatkę");
|
|
PROGMEM Language_Str MSG_UBL_BUILD_MESH_M1 = _UxGT("Buduj siatkę (") PREHEAT_1_LABEL _UxGT(")");
|
|
PROGMEM Language_Str MSG_UBL_BUILD_MESH_M2 = _UxGT("Buduj siatkę (") PREHEAT_2_LABEL _UxGT(")");
|
|
PROGMEM Language_Str MSG_UBL_BUILD_COLD_MESH = _UxGT("Buduj siatkę na zimno");
|
|
PROGMEM Language_Str MSG_UBL_MESH_HEIGHT_ADJUST = _UxGT("Dostrojenie wysokości siatki");
|
|
PROGMEM Language_Str MSG_UBL_MESH_HEIGHT_AMOUNT = _UxGT("Wartość wysokości");
|
|
PROGMEM Language_Str MSG_UBL_VALIDATE_MESH_MENU = _UxGT("Sprawdzenie siatki");
|
|
PROGMEM Language_Str MSG_UBL_VALIDATE_MESH_M1 = _UxGT("Sprawdzenie siatki (") PREHEAT_1_LABEL _UxGT(")");
|
|
PROGMEM Language_Str MSG_UBL_VALIDATE_MESH_M2 = _UxGT("Sprawdzenie siatki (") PREHEAT_2_LABEL _UxGT(")");
|
|
PROGMEM Language_Str MSG_UBL_VALIDATE_CUSTOM_MESH = _UxGT("Sprawdzenie własnej siatki");
|
|
PROGMEM Language_Str MSG_G26_HEATING_BED = _UxGT("G26 Nagrzewanie stołu");
|
|
PROGMEM Language_Str MSG_G26_HEATING_NOZZLE = _UxGT("G26 Nagrzewanie dyszy");
|
|
PROGMEM Language_Str MSG_G26_MANUAL_PRIME = _UxGT("Napełnianie ręczne...");
|
|
PROGMEM Language_Str MSG_G26_FIXED_LENGTH = _UxGT("Napełnij kreśloną długością");
|
|
PROGMEM Language_Str MSG_G26_PRIME_DONE = _UxGT("Napełianie zakończone");
|
|
PROGMEM Language_Str MSG_G26_CANCELED = _UxGT("G26 Przewane");
|
|
PROGMEM Language_Str MSG_G26_LEAVING = _UxGT("Opuszczanie G26");
|
|
PROGMEM Language_Str MSG_UBL_CONTINUE_MESH = _UxGT("Kontynuuj tworzenie siatki");
|
|
PROGMEM Language_Str MSG_UBL_MESH_LEVELING = _UxGT("Poziomowanie siatką");
|
|
PROGMEM Language_Str MSG_UBL_3POINT_MESH_LEVELING = _UxGT("Poziomowaie 3-punktowe");
|
|
PROGMEM Language_Str MSG_UBL_GRID_MESH_LEVELING = _UxGT("Poziomowaie według siatki");
|
|
PROGMEM Language_Str MSG_UBL_MESH_LEVEL = _UxGT("Poziomuj siatkę");
|
|
PROGMEM Language_Str MSG_UBL_SIDE_POINTS = _UxGT("Punkty boczne");
|
|
PROGMEM Language_Str MSG_UBL_MAP_TYPE = _UxGT("Rodzaj mapy");
|
|
PROGMEM Language_Str MSG_UBL_OUTPUT_MAP = _UxGT("Wyslij mapę siatki");
|
|
PROGMEM Language_Str MSG_UBL_OUTPUT_MAP_HOST = _UxGT("Wyslij do Hosta");
|
|
PROGMEM Language_Str MSG_UBL_OUTPUT_MAP_CSV = _UxGT("Wyslij do CSV");
|
|
PROGMEM Language_Str MSG_UBL_OUTPUT_MAP_BACKUP = _UxGT("Kopia poza drukarką");
|
|
PROGMEM Language_Str MSG_UBL_INFO_UBL = _UxGT("Wyslij info UBL");
|
|
PROGMEM Language_Str MSG_UBL_FILLIN_AMOUNT = _UxGT("Stopień wypełnienia");
|
|
PROGMEM Language_Str MSG_UBL_MANUAL_FILLIN = _UxGT("Ręczne wypełnienie");
|
|
PROGMEM Language_Str MSG_UBL_SMART_FILLIN = _UxGT("Inteligentne wypełnienie");
|
|
PROGMEM Language_Str MSG_UBL_FILLIN_MESH = _UxGT("Wypełnienie siatki");
|
|
PROGMEM Language_Str MSG_UBL_INVALIDATE_ALL = _UxGT("Unieważnij wszystko");
|
|
PROGMEM Language_Str MSG_UBL_INVALIDATE_CLOSEST = _UxGT("Unieważnij najbliższy");
|
|
PROGMEM Language_Str MSG_UBL_FINE_TUNE_ALL = _UxGT("Dostrajaj wszystko");
|
|
PROGMEM Language_Str MSG_UBL_FINE_TUNE_CLOSEST = _UxGT("Dostrajaj najbliższy");
|
|
PROGMEM Language_Str MSG_UBL_STORAGE_MESH_MENU = _UxGT("Przechowywanie siatki");
|
|
PROGMEM Language_Str MSG_UBL_STORAGE_SLOT = _UxGT("Slot Pamięci");
|
|
PROGMEM Language_Str MSG_UBL_LOAD_MESH = _UxGT("Załaduj siatke stołu");
|
|
PROGMEM Language_Str MSG_UBL_SAVE_MESH = _UxGT("Zapisz siatke stołu");
|
|
PROGMEM Language_Str MSG_MESH_LOADED = _UxGT("M117 Siatka %i załadowana");
|
|
PROGMEM Language_Str MSG_MESH_SAVED = _UxGT("M117 Siatka %i Zapisana");
|
|
PROGMEM Language_Str MSG_UBL_NO_STORAGE = _UxGT("Brak magazynu");
|
|
PROGMEM Language_Str MSG_UBL_SAVE_ERROR = _UxGT("Błąd: Zapis UBL");
|
|
PROGMEM Language_Str MSG_UBL_RESTORE_ERROR = _UxGT("Bład: Odczyt UBL");
|
|
PROGMEM Language_Str MSG_UBL_Z_OFFSET = _UxGT("Przesunięcie Z: ");
|
|
PROGMEM Language_Str MSG_UBL_Z_OFFSET_STOPPED = _UxGT("Przesunięcie Z zatrzymane");
|
|
PROGMEM Language_Str MSG_UBL_STEP_BY_STEP_MENU = _UxGT("UBL Krok po kroku");
|
|
PROGMEM Language_Str MSG_UBL_1_BUILD_COLD_MESH = _UxGT("1. Tworzeni ezimnej siatki");
|
|
PROGMEM Language_Str MSG_UBL_2_SMART_FILLIN = _UxGT("2. Inteligentne wypełnienie");
|
|
PROGMEM Language_Str MSG_UBL_3_VALIDATE_MESH_MENU = _UxGT("3. Sprawdzenie siatki");
|
|
PROGMEM Language_Str MSG_UBL_4_FINE_TUNE_ALL = _UxGT("4. Dostrojenie wszystkiego");
|
|
PROGMEM Language_Str MSG_UBL_5_VALIDATE_MESH_MENU = _UxGT("5. Sprawdzenie siatki");
|
|
PROGMEM Language_Str MSG_UBL_6_FINE_TUNE_ALL = _UxGT("6. Dostrojenie wszystkiego");
|
|
PROGMEM Language_Str MSG_UBL_7_SAVE_MESH = _UxGT("7. Zapis siatki stołu");
|
|
|
|
PROGMEM Language_Str MSG_LED_CONTROL = _UxGT("Sterowanie LED");
|
|
PROGMEM Language_Str MSG_LEDS = _UxGT("Światła");
|
|
PROGMEM Language_Str MSG_LED_PRESETS = _UxGT("Ustawienia świateł");
|
|
PROGMEM Language_Str MSG_SET_LEDS_RED = _UxGT("Czerwony");
|
|
PROGMEM Language_Str MSG_SET_LEDS_ORANGE = _UxGT("Pomarańczowy");
|
|
PROGMEM Language_Str MSG_SET_LEDS_YELLOW = _UxGT("Zółty");
|
|
PROGMEM Language_Str MSG_SET_LEDS_GREEN = _UxGT("Zielony");
|
|
PROGMEM Language_Str MSG_SET_LEDS_BLUE = _UxGT("Niebieski");
|
|
PROGMEM Language_Str MSG_SET_LEDS_INDIGO = _UxGT("Indygo");
|
|
PROGMEM Language_Str MSG_SET_LEDS_VIOLET = _UxGT("Fioletowy");
|
|
PROGMEM Language_Str MSG_SET_LEDS_WHITE = _UxGT("Biały");
|
|
PROGMEM Language_Str MSG_SET_LEDS_DEFAULT = _UxGT("Domyślny");
|
|
PROGMEM Language_Str MSG_CUSTOM_LEDS = _UxGT("Własne światła");
|
|
PROGMEM Language_Str MSG_INTENSITY_R = _UxGT("Czerwony");
|
|
PROGMEM Language_Str MSG_INTENSITY_G = _UxGT("Zielony");
|
|
PROGMEM Language_Str MSG_INTENSITY_B = _UxGT("Niebieski");
|
|
PROGMEM Language_Str MSG_INTENSITY_W = _UxGT("Biały");
|
|
PROGMEM Language_Str MSG_LED_BRIGHTNESS = _UxGT("Jasność");
|
|
|
|
PROGMEM Language_Str MSG_MOVING = _UxGT("Ruch...");
|
|
PROGMEM Language_Str MSG_FREE_XY = _UxGT("Swobodne XY");
|
|
PROGMEM Language_Str MSG_MOVE_X = _UxGT("Przesuń w X");
|
|
PROGMEM Language_Str MSG_MOVE_Y = _UxGT("Przesuń w Y");
|
|
PROGMEM Language_Str MSG_MOVE_Z = _UxGT("Przesuń w Z");
|
|
PROGMEM Language_Str MSG_MOVE_E = _UxGT("Ekstruzja (os E)");
|
|
PROGMEM Language_Str MSG_MOVE_EN = _UxGT("Ekstruzja (os E) *");
|
|
PROGMEM Language_Str MSG_HOTEND_TOO_COLD = _UxGT("Dysza za zimna");
|
|
PROGMEM Language_Str MSG_MOVE_Z_DIST = _UxGT("Przesuń co %smm");
|
|
PROGMEM Language_Str MSG_MOVE_01MM = _UxGT("Przesuń co .1mm");
|
|
PROGMEM Language_Str MSG_MOVE_1MM = _UxGT("Przesuń co 1mm");
|
|
PROGMEM Language_Str MSG_MOVE_10MM = _UxGT("Przesuń co 10mm");
|
|
PROGMEM Language_Str MSG_SPEED = _UxGT("Predkość");
|
|
PROGMEM Language_Str MSG_BED_Z = _UxGT("Stół Z");
|
|
PROGMEM Language_Str MSG_NOZZLE = _UxGT("Dysza");
|
|
PROGMEM Language_Str MSG_NOZZLE_N = _UxGT("Dysza ~");
|
|
PROGMEM Language_Str MSG_BED = _UxGT("Stół");
|
|
PROGMEM Language_Str MSG_CHAMBER = _UxGT("Obudowa");
|
|
PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Obroty wiatraka");
|
|
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Obroty wiatraka =");
|
|
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED = _UxGT("Obroty dodatkowego wiatraka");
|
|
PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("Obroty dodatkowego wiatraka =");
|
|
PROGMEM Language_Str MSG_FLOW = _UxGT("Przepływ");
|
|
PROGMEM Language_Str MSG_FLOW_N = _UxGT("Przepływ ~");
|
|
PROGMEM Language_Str MSG_CONTROL = _UxGT("Ustawienia");
|
|
PROGMEM Language_Str MSG_MIN = " " LCD_STR_THERMOMETER _UxGT(" Min");
|
|
PROGMEM Language_Str MSG_MAX = " " LCD_STR_THERMOMETER _UxGT(" Max");
|
|
PROGMEM Language_Str MSG_FACTOR = " " LCD_STR_THERMOMETER _UxGT(" Mnożnik");
|
|
PROGMEM Language_Str MSG_AUTOTEMP = _UxGT("Auto. temperatura");
|
|
PROGMEM Language_Str MSG_LCD_ON = _UxGT("Wł.");
|
|
PROGMEM Language_Str MSG_LCD_OFF = _UxGT("Wył.");
|
|
PROGMEM Language_Str MSG_PID_AUTOTUNE = _UxGT("PID Autostrojenie");
|
|
PROGMEM Language_Str MSG_PID_AUTOTUNE_E = _UxGT("PID Autostrojenie *");
|
|
PROGMEM Language_Str MSG_PID_P = _UxGT("PID-P");
|
|
PROGMEM Language_Str MSG_PID_P_E = _UxGT("PID-P *");
|
|
PROGMEM Language_Str MSG_PID_I = _UxGT("PID-I");
|
|
PROGMEM Language_Str MSG_PID_I_E = _UxGT("PID-I *");
|
|
PROGMEM Language_Str MSG_PID_D = _UxGT("PID-D");
|
|
PROGMEM Language_Str MSG_PID_D_E = _UxGT("PID-D *");
|
|
PROGMEM Language_Str MSG_PID_C = _UxGT("PID-C");
|
|
PROGMEM Language_Str MSG_PID_C_E = _UxGT("PID-C *");
|
|
PROGMEM Language_Str MSG_SELECT = _UxGT("Wybierz");
|
|
PROGMEM Language_Str MSG_SELECT_E = _UxGT("Wybierz *");
|
|
PROGMEM Language_Str MSG_ACC = _UxGT("Przyspieszenie");
|
|
PROGMEM Language_Str MSG_JERK = _UxGT("Zryw");
|
|
PROGMEM Language_Str MSG_VA_JERK = _UxGT("Zryw V") LCD_STR_A;
|
|
PROGMEM Language_Str MSG_VB_JERK = _UxGT("Zryw V") LCD_STR_B;
|
|
PROGMEM Language_Str MSG_VC_JERK = _UxGT("Zryw V") LCD_STR_C;
|
|
PROGMEM Language_Str MSG_VE_JERK = _UxGT("Zryw Ve");
|
|
PROGMEM Language_Str MSG_JUNCTION_DEVIATION = _UxGT("Junction Dev");
|
|
PROGMEM Language_Str MSG_VELOCITY = _UxGT("Prędkość (V)");
|
|
PROGMEM Language_Str MSG_VMAX_A = _UxGT("Vmax ") LCD_STR_A;
|
|
PROGMEM Language_Str MSG_VMAX_B = _UxGT("Vmax ") LCD_STR_B;
|
|
PROGMEM Language_Str MSG_VMAX_C = _UxGT("Vmax ") LCD_STR_C;
|
|
PROGMEM Language_Str MSG_VMAX_E = _UxGT("Vmax ") LCD_STR_E;
|
|
PROGMEM Language_Str MSG_VMAX_EN = _UxGT("Vmax *");
|
|
PROGMEM Language_Str MSG_VMIN = _UxGT("Vmin");
|
|
PROGMEM Language_Str MSG_VTRAV_MIN = _UxGT("Vskok min");
|
|
PROGMEM Language_Str MSG_ACCELERATION = _UxGT("Przyspieszenie (A)");
|
|
PROGMEM Language_Str MSG_AMAX_A = _UxGT("Amax ") LCD_STR_A;
|
|
PROGMEM Language_Str MSG_AMAX_B = _UxGT("Amax ") LCD_STR_B;
|
|
PROGMEM Language_Str MSG_AMAX_C = _UxGT("Amax ") LCD_STR_C;
|
|
PROGMEM Language_Str MSG_AMAX_E = _UxGT("Amax ") LCD_STR_E;
|
|
PROGMEM Language_Str MSG_AMAX_EN = _UxGT("Amax *");
|
|
PROGMEM Language_Str MSG_A_RETRACT = _UxGT("A-wycofanie");
|
|
PROGMEM Language_Str MSG_A_TRAVEL = _UxGT("A-przesuń.");
|
|
PROGMEM Language_Str MSG_STEPS_PER_MM = _UxGT("kroki/mm");
|
|
PROGMEM Language_Str MSG_A_STEPS = _UxGT("kroki") LCD_STR_A _UxGT("/mm");
|
|
PROGMEM Language_Str MSG_B_STEPS = _UxGT("kroki") LCD_STR_B _UxGT("/mm");
|
|
PROGMEM Language_Str MSG_C_STEPS = _UxGT("kroki") LCD_STR_C _UxGT("/mm");
|
|
PROGMEM Language_Str MSG_E_STEPS = _UxGT("krokiE/mm");
|
|
PROGMEM Language_Str MSG_EN_STEPS = _UxGT("kroki */mm");
|
|
PROGMEM Language_Str MSG_TEMPERATURE = _UxGT("Temperatura");
|
|
PROGMEM Language_Str MSG_MOTION = _UxGT("Ruch");
|
|
PROGMEM Language_Str MSG_FILAMENT = _UxGT("Filament");
|
|
PROGMEM Language_Str MSG_VOLUMETRIC_ENABLED = _UxGT("E w mm3");
|
|
PROGMEM Language_Str MSG_FILAMENT_DIAM = _UxGT("Śr. fil.");
|
|
PROGMEM Language_Str MSG_FILAMENT_DIAM_E = _UxGT("Śr. fil. *");
|
|
PROGMEM Language_Str MSG_FILAMENT_UNLOAD = _UxGT("Wyładuj mm");
|
|
PROGMEM Language_Str MSG_FILAMENT_LOAD = _UxGT("Załaduj mm");
|
|
PROGMEM Language_Str MSG_ADVANCE_K = _UxGT("Advance K");
|
|
PROGMEM Language_Str MSG_ADVANCE_K_E = _UxGT("Advance K *");
|
|
PROGMEM Language_Str MSG_CONTRAST = _UxGT("Kontrast LCD");
|
|
PROGMEM Language_Str MSG_STORE_EEPROM = _UxGT("Zapisz w pamięci");
|
|
PROGMEM Language_Str MSG_LOAD_EEPROM = _UxGT("Wczytaj z pamięci");
|
|
PROGMEM Language_Str MSG_RESTORE_FAILSAFE = _UxGT("Ustaw. fabryczne");
|
|
PROGMEM Language_Str MSG_INIT_EEPROM = _UxGT("Initializuj EEPROM");
|
|
PROGMEM Language_Str MSG_MEDIA_UPDATE = _UxGT("Uaktualnij kartę");
|
|
PROGMEM Language_Str MSG_RESET_PRINTER = _UxGT("Resetuj drukarkę");
|
|
PROGMEM Language_Str MSG_REFRESH = LCD_STR_REFRESH _UxGT("Odswież");
|
|
PROGMEM Language_Str MSG_WATCH = _UxGT("Ekran główny");
|
|
PROGMEM Language_Str MSG_PREPARE = _UxGT("Przygotuj");
|
|
PROGMEM Language_Str MSG_TUNE = _UxGT("Strojenie");
|
|
PROGMEM Language_Str MSG_START_PRINT = _UxGT("Start wydruku");
|
|
PROGMEM Language_Str MSG_BUTTON_NEXT = _UxGT("Następny");
|
|
PROGMEM Language_Str MSG_BUTTON_INIT = _UxGT("Inic.");
|
|
PROGMEM Language_Str MSG_BUTTON_STOP = _UxGT("Stop");
|
|
PROGMEM Language_Str MSG_BUTTON_PRINT = _UxGT("Drukuj");
|
|
PROGMEM Language_Str MSG_BUTTON_RESET = _UxGT("Resetuj");
|
|
PROGMEM Language_Str MSG_BUTTON_CANCEL = _UxGT("Przerwij");
|
|
PROGMEM Language_Str MSG_BUTTON_DONE = _UxGT("Gotowe");
|
|
PROGMEM Language_Str MSG_PAUSE_PRINT = _UxGT("Wstrzymaj druk");
|
|
PROGMEM Language_Str MSG_RESUME_PRINT = _UxGT("Wznowienie");
|
|
PROGMEM Language_Str MSG_STOP_PRINT = _UxGT("Stop");
|
|
PROGMEM Language_Str MSG_OUTAGE_RECOVERY = _UxGT("Odzyskiwanie po awarii");
|
|
PROGMEM Language_Str MSG_MEDIA_MENU = _UxGT("Karta SD");
|
|
PROGMEM Language_Str MSG_NO_MEDIA = _UxGT("Brak karty");
|
|
PROGMEM Language_Str MSG_DWELL = _UxGT("Uśpij...");
|
|
PROGMEM Language_Str MSG_USERWAIT = _UxGT("Oczekiwanie...");
|
|
PROGMEM Language_Str MSG_PRINT_PAUSED = _UxGT("Druk wstrzymany");
|
|
PROGMEM Language_Str MSG_PRINTING = _UxGT("Drukowanie...");
|
|
PROGMEM Language_Str MSG_PRINT_ABORTED = _UxGT("Druk przerwany");
|
|
PROGMEM Language_Str MSG_NO_MOVE = _UxGT("Brak ruchu");
|
|
PROGMEM Language_Str MSG_KILLED = _UxGT("Ubity. ");
|
|
PROGMEM Language_Str MSG_STOPPED = _UxGT("Zatrzymany. ");
|
|
PROGMEM Language_Str MSG_CONTROL_RETRACT = _UxGT("Wycofaj mm");
|
|
PROGMEM Language_Str MSG_CONTROL_RETRACT_SWAP = _UxGT("Z Wycof. mm");
|
|
PROGMEM Language_Str MSG_CONTROL_RETRACTF = _UxGT("Wycofaj V");
|
|
PROGMEM Language_Str MSG_CONTROL_RETRACT_ZHOP = _UxGT("Skok Z mm");
|
|
PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVER = _UxGT("Cof. wycof. mm");
|
|
PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVER_SWAP = _UxGT("Z Cof. wyc. mm");
|
|
PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVERF = _UxGT("Cof. wycof. V");
|
|
PROGMEM Language_Str MSG_AUTORETRACT = _UxGT("Auto. wycofanie");
|
|
PROGMEM Language_Str MSG_FILAMENT_SWAP_LENGTH = _UxGT("Długość zmiany");
|
|
PROGMEM Language_Str MSG_FILAMENT_PURGE_LENGTH = _UxGT("Długość oczyszczania");
|
|
PROGMEM Language_Str MSG_TOOL_CHANGE = _UxGT("Zmiana narzędzia");
|
|
PROGMEM Language_Str MSG_TOOL_CHANGE_ZLIFT = _UxGT("Podniesienie Z");
|
|
PROGMEM Language_Str MSG_SINGLENOZZLE_PRIME_SPD = _UxGT("Prędkość napełniania");
|
|
PROGMEM Language_Str MSG_SINGLENOZZLE_RETRACT_SPD = _UxGT("Prędkość wycofania");
|
|
PROGMEM Language_Str MSG_NOZZLE_STANDBY = _UxGT("Dysza w oczekiwaniu");
|
|
PROGMEM Language_Str MSG_FILAMENTCHANGE = _UxGT("Zmień filament");
|
|
PROGMEM Language_Str MSG_FILAMENTCHANGE_E = _UxGT("Zmień filament *");
|
|
PROGMEM Language_Str MSG_FILAMENTLOAD = _UxGT("Załaduj Filament");
|
|
PROGMEM Language_Str MSG_FILAMENTLOAD_E = _UxGT("Załaduj Filament *");
|
|
PROGMEM Language_Str MSG_FILAMENTUNLOAD = _UxGT("Wyładuj Filament");
|
|
PROGMEM Language_Str MSG_FILAMENTUNLOAD_E = _UxGT("Wyładuj Filament *");
|
|
PROGMEM Language_Str MSG_FILAMENTUNLOAD_ALL = _UxGT("Wyładuj wszystkie");
|
|
PROGMEM Language_Str MSG_INIT_MEDIA = _UxGT("Inicjal. karty SD");
|
|
PROGMEM Language_Str MSG_CHANGE_MEDIA = _UxGT("Zmiana karty SD");
|
|
PROGMEM Language_Str MSG_RELEASE_MEDIA = _UxGT("Zwolnienie karty");
|
|
PROGMEM Language_Str MSG_ZPROBE_OUT = _UxGT("Sonda Z za stołem");
|
|
PROGMEM Language_Str MSG_SKEW_FACTOR = _UxGT("Współczynik skrzywienia");
|
|
PROGMEM Language_Str MSG_BLTOUCH = _UxGT("BLTouch");
|
|
PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("BLTouch Self-Test");
|
|
PROGMEM Language_Str MSG_BLTOUCH_RESET = _UxGT("Reset BLTouch");
|
|
PROGMEM Language_Str MSG_BLTOUCH_STOW = _UxGT("Cmd: Stow");
|
|
PROGMEM Language_Str MSG_BLTOUCH_DEPLOY = _UxGT("Cmd: Deploy");
|
|
PROGMEM Language_Str MSG_BLTOUCH_SW_MODE = _UxGT("Cmd: SW-Mode");
|
|
PROGMEM Language_Str MSG_BLTOUCH_5V_MODE = _UxGT("Cmd: 5V-Mode");
|
|
PROGMEM Language_Str MSG_BLTOUCH_OD_MODE = _UxGT("Cmd: OD-Mode");
|
|
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE = _UxGT("Cmd: Mode-Store");
|
|
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_5V = _UxGT("Set BLTouch to 5V");
|
|
PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_OD = _UxGT("Set BLTouch to OD");
|
|
PROGMEM Language_Str MSG_BLTOUCH_MODE_ECHO = _UxGT("Report Drain");
|
|
PROGMEM Language_Str MSG_BLTOUCH_MODE_CHANGE = _UxGT("NIEBEZPIECZNE: Złe ustawienia mogą uszkodzić drukarkę. Kontynuować?");
|
|
PROGMEM Language_Str MSG_TOUCHMI_PROBE = _UxGT("TouchMI");
|
|
PROGMEM Language_Str MSG_TOUCHMI_INIT = _UxGT("Init TouchMI");
|
|
PROGMEM Language_Str MSG_TOUCHMI_ZTEST = _UxGT("Z Offset Test");
|
|
PROGMEM Language_Str MSG_TOUCHMI_SAVE = _UxGT("Save");
|
|
PROGMEM Language_Str MSG_MANUAL_DEPLOY_TOUCHMI = _UxGT("Deploy TouchMI");
|
|
PROGMEM Language_Str MSG_MANUAL_DEPLOY = _UxGT("Deploy Z-Probe");
|
|
PROGMEM Language_Str MSG_MANUAL_STOW = _UxGT("Stow Z-Probe");
|
|
PROGMEM Language_Str MSG_HOME_FIRST = _UxGT("Najpierw Home %s%s%s");
|
|
PROGMEM Language_Str MSG_ZPROBE_ZOFFSET = _UxGT("Offset Z");
|
|
PROGMEM Language_Str MSG_BABYSTEP_X = _UxGT("Babystep X");
|
|
PROGMEM Language_Str MSG_BABYSTEP_Y = _UxGT("Babystep Y");
|
|
PROGMEM Language_Str MSG_BABYSTEP_Z = _UxGT("Babystep Z");
|
|
PROGMEM Language_Str MSG_BABYSTEP_TOTAL = _UxGT("Łącznie");
|
|
PROGMEM Language_Str MSG_ENDSTOP_ABORT = _UxGT("Błąd krańcówki");
|
|
PROGMEM Language_Str MSG_HEATING_FAILED_LCD = _UxGT("Rozgrz. nieudane");
|
|
PROGMEM Language_Str MSG_HEATING_FAILED_LCD_BED = _UxGT("Rozgrz. stołu nieudane");
|
|
PROGMEM Language_Str MSG_HEATING_FAILED_LCD_CHAMBER = _UxGT("Rozgrz. komory nieudane");
|
|
PROGMEM Language_Str MSG_ERR_REDUNDANT_TEMP = _UxGT("Błąd temperatury");
|
|
PROGMEM Language_Str MSG_THERMAL_RUNAWAY = _UxGT("ZANIK TEMPERATURY");
|
|
PROGMEM Language_Str MSG_THERMAL_RUNAWAY_BED = _UxGT("ZANIK TEMP. STOŁU");
|
|
PROGMEM Language_Str MSG_THERMAL_RUNAWAY_CHAMBER = _UxGT("ZANIK TEMP.KOMORY");
|
|
PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("Błąd: MAXTEMP");
|
|
PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("Błąd: MINTEMP");
|
|
PROGMEM Language_Str MSG_ERR_MAXTEMP_BED = _UxGT("Błąd: MAXTEMP STÓŁ");
|
|
PROGMEM Language_Str MSG_ERR_MINTEMP_BED = _UxGT("Błąd: MINTEMP STÓŁ");
|
|
PROGMEM Language_Str MSG_ERR_MAXTEMP_CHAMBER = _UxGT("Błąd: MAXTEMP KOMORA");
|
|
PROGMEM Language_Str MSG_ERR_MINTEMP_CHAMBER = _UxGT("Błąd: MINTEMP KOMORA");
|
|
PROGMEM Language_Str MSG_ERR_Z_HOMING = _UxGT("Najpierw Home XY");
|
|
PROGMEM Language_Str MSG_HALTED = _UxGT("Drukarka zatrzym.");
|
|
PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("Proszę zresetować");
|
|
PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("d"); // One character only
|
|
PROGMEM Language_Str MSG_SHORT_HOUR = _UxGT("g"); // One character only
|
|
PROGMEM Language_Str MSG_SHORT_MINUTE = _UxGT("m"); // One character only
|
|
PROGMEM Language_Str MSG_HEATING = _UxGT("Rozgrzewanie...");
|
|
PROGMEM Language_Str MSG_COOLING = _UxGT("Chłodzenie...");
|
|
PROGMEM Language_Str MSG_BED_HEATING = _UxGT("Rozgrzewanie stołu...");
|
|
PROGMEM Language_Str MSG_BED_COOLING = _UxGT("Chłodzenie stołu...");
|
|
PROGMEM Language_Str MSG_CHAMBER_HEATING = _UxGT("Rozgrzewanie komory...");
|
|
PROGMEM Language_Str MSG_CHAMBER_COOLING = _UxGT("Chłodzenie komory...");
|
|
PROGMEM Language_Str MSG_DELTA_CALIBRATE = _UxGT("Kalibrowanie Delty");
|
|
PROGMEM Language_Str MSG_DELTA_CALIBRATE_X = _UxGT("Kalibruj X");
|
|
PROGMEM Language_Str MSG_DELTA_CALIBRATE_Y = _UxGT("Kalibruj Y");
|
|
PROGMEM Language_Str MSG_DELTA_CALIBRATE_Z = _UxGT("Kalibruj Z");
|
|
PROGMEM Language_Str MSG_DELTA_CALIBRATE_CENTER = _UxGT("Kalibruj środek");
|
|
PROGMEM Language_Str MSG_DELTA_SETTINGS = _UxGT("Ustawienia delty");
|
|
PROGMEM Language_Str MSG_DELTA_AUTO_CALIBRATE = _UxGT("Auto kalibrowanie");
|
|
PROGMEM Language_Str MSG_DELTA_HEIGHT_CALIBRATE = _UxGT("Ustaw wysokość delty");
|
|
PROGMEM Language_Str MSG_DELTA_Z_OFFSET_CALIBRATE = _UxGT("Przesun. Z sondy");
|
|
PROGMEM Language_Str MSG_DELTA_DIAG_ROD = _UxGT("Ukośne ramię");
|
|
PROGMEM Language_Str MSG_DELTA_HEIGHT = _UxGT("Wysokość");
|
|
PROGMEM Language_Str MSG_DELTA_RADIUS = _UxGT("Promień");
|
|
PROGMEM Language_Str MSG_INFO_MENU = _UxGT("O drukarce");
|
|
PROGMEM Language_Str MSG_INFO_PRINTER_MENU = _UxGT("Info drukarki");
|
|
PROGMEM Language_Str MSG_3POINT_LEVELING = _UxGT("Poziomowanie 3-punktowe");
|
|
PROGMEM Language_Str MSG_LINEAR_LEVELING = _UxGT("Poziomowanie liniowe");
|
|
PROGMEM Language_Str MSG_BILINEAR_LEVELING = _UxGT("Poziomowanie biliniowe");
|
|
PROGMEM Language_Str MSG_UBL_LEVELING = _UxGT("Unified Bed Leveling");
|
|
PROGMEM Language_Str MSG_MESH_LEVELING = _UxGT("Poziomowanie siatką");
|
|
PROGMEM Language_Str MSG_INFO_STATS_MENU = _UxGT("Statystyki");
|
|
PROGMEM Language_Str MSG_INFO_BOARD_MENU = _UxGT("Info płyty");
|
|
PROGMEM Language_Str MSG_INFO_THERMISTOR_MENU = _UxGT("Termistory");
|
|
PROGMEM Language_Str MSG_INFO_EXTRUDERS = _UxGT("Ekstrudery");
|
|
PROGMEM Language_Str MSG_INFO_BAUDRATE = _UxGT("Predkość USB");
|
|
PROGMEM Language_Str MSG_INFO_PROTOCOL = _UxGT("Protokół");
|
|
PROGMEM Language_Str MSG_INFO_RUNAWAY_OFF = _UxGT("Zegar pracy: OFF");
|
|
PROGMEM Language_Str MSG_INFO_RUNAWAY_ON = _UxGT("Zegar pracy: ON");
|
|
|
|
PROGMEM Language_Str MSG_CASE_LIGHT = _UxGT("Oświetlenie obudowy");
|
|
PROGMEM Language_Str MSG_CASE_LIGHT_BRIGHTNESS = _UxGT("Jasność oświetlenia");
|
|
PROGMEM Language_Str MSG_EXPECTED_PRINTER = _UxGT("Niepoprawna drukarka");
|
|
|
|
#if LCD_WIDTH >= 20
|
|
PROGMEM Language_Str MSG_INFO_PRINT_COUNT = _UxGT("Wydrukowano");
|
|
PROGMEM Language_Str MSG_INFO_COMPLETED_PRINTS = _UxGT("Ukończono");
|
|
PROGMEM Language_Str MSG_INFO_PRINT_TIME = _UxGT("Czas druku");
|
|
PROGMEM Language_Str MSG_INFO_PRINT_LONGEST = _UxGT("Najdł. druk");
|
|
PROGMEM Language_Str MSG_INFO_PRINT_FILAMENT = _UxGT("Użyty fil.");
|
|
#else
|
|
PROGMEM Language_Str MSG_INFO_PRINT_COUNT = _UxGT("Wydrukowano");
|
|
PROGMEM Language_Str MSG_INFO_COMPLETED_PRINTS = _UxGT("Ukończono");
|
|
PROGMEM Language_Str MSG_INFO_PRINT_TIME = _UxGT("Razem");
|
|
PROGMEM Language_Str MSG_INFO_PRINT_LONGEST = _UxGT("Najdł. druk");
|
|
PROGMEM Language_Str MSG_INFO_PRINT_FILAMENT = _UxGT("Użyty fil.");
|
|
#endif
|
|
|
|
PROGMEM Language_Str MSG_INFO_MIN_TEMP = _UxGT("Min Temp");
|
|
PROGMEM Language_Str MSG_INFO_MAX_TEMP = _UxGT("Max Temp");
|
|
PROGMEM Language_Str MSG_INFO_PSU = _UxGT("Zasilacz");
|
|
PROGMEM Language_Str MSG_DRIVE_STRENGTH = _UxGT("Siła silnika");
|
|
PROGMEM Language_Str MSG_DAC_PERCENT = _UxGT("Siła %");
|
|
PROGMEM Language_Str MSG_ERROR_TMC = _UxGT("TMC BŁĄD POŁĄCZENIA");
|
|
PROGMEM Language_Str MSG_DAC_EEPROM_WRITE = _UxGT("Zapisz DAC EEPROM");
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER = _UxGT("ZMIEŃ FILAMENT");
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER_PAUSE = _UxGT("WYDRUK WSTRZYMANY");
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER_LOAD = _UxGT("ZAŁADUJ FILAMENT");
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER_UNLOAD = _UxGT("WYŁADUJ FILAMENT");
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_OPTION_HEADER = _UxGT("OPCJE WZNOWIENIA:");
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_OPTION_PURGE = _UxGT("Oczyść więcej");
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_OPTION_RESUME = _UxGT("Kontynuuj");
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_NOZZLE = _UxGT(" Dysza: ");
|
|
PROGMEM Language_Str MSG_RUNOUT_SENSOR = _UxGT("Czujnik filamentu");
|
|
PROGMEM Language_Str MSG_RUNOUT_DISTANCE_MM = _UxGT("Dystans do czujnika mm");
|
|
PROGMEM Language_Str MSG_LCD_HOMING_FAILED = _UxGT("Zerowanie nieudane");
|
|
PROGMEM Language_Str MSG_LCD_PROBING_FAILED = _UxGT("Sondowanie nieudane");
|
|
PROGMEM Language_Str MSG_M600_TOO_COLD = _UxGT("M600: za zimne");
|
|
|
|
PROGMEM Language_Str MSG_MMU2_CHOOSE_FILAMENT_HEADER = _UxGT("WYBIERZ FILAMENT");
|
|
PROGMEM Language_Str MSG_MMU2_MENU = _UxGT("MMU");
|
|
PROGMEM Language_Str MSG_MMU2_WRONG_FIRMWARE = _UxGT("Uaktualnij firmware MMU!");
|
|
PROGMEM Language_Str MSG_MMU2_NOT_RESPONDING = _UxGT("MMU wymaga uwagi.");
|
|
PROGMEM Language_Str MSG_MMU2_RESUME = _UxGT("Wznów wydruk");
|
|
PROGMEM Language_Str MSG_MMU2_RESUMING = _UxGT("Wznawianie...");
|
|
PROGMEM Language_Str MSG_MMU2_LOAD_FILAMENT = _UxGT("Załaduj filament");
|
|
PROGMEM Language_Str MSG_MMU2_LOAD_ALL = _UxGT("Załaduj wszystko");
|
|
PROGMEM Language_Str MSG_MMU2_LOAD_TO_NOZZLE = _UxGT("Załaduj do dyszy");
|
|
PROGMEM Language_Str MSG_MMU2_EJECT_FILAMENT = _UxGT("Wysuń filament");
|
|
PROGMEM Language_Str MSG_MMU2_EJECT_FILAMENT_N = _UxGT("Wysuń filament ~");
|
|
PROGMEM Language_Str MSG_MMU2_UNLOAD_FILAMENT = _UxGT("Wyładuj filament");
|
|
PROGMEM Language_Str MSG_MMU2_LOADING_FILAMENT = _UxGT("Ładowanie fil. %i...");
|
|
PROGMEM Language_Str MSG_MMU2_EJECTING_FILAMENT = _UxGT("Wysuwanie fil. ...");
|
|
PROGMEM Language_Str MSG_MMU2_UNLOADING_FILAMENT = _UxGT("Wyładowywanie fil....");
|
|
PROGMEM Language_Str MSG_MMU2_ALL = _UxGT("Wszystko");
|
|
PROGMEM Language_Str MSG_MMU2_FILAMENT_N = _UxGT("Filament ~");
|
|
PROGMEM Language_Str MSG_MMU2_RESET = _UxGT("Resetuj MMU");
|
|
PROGMEM Language_Str MSG_MMU2_RESETTING = _UxGT("Resetowanie MMU...");
|
|
PROGMEM Language_Str MSG_MMU2_EJECT_RECOVER = _UxGT("Usuń, kliknij");
|
|
|
|
PROGMEM Language_Str MSG_MIX = _UxGT("Miks");
|
|
PROGMEM Language_Str MSG_MIX_COMPONENT_N = _UxGT("Komponent ~");
|
|
PROGMEM Language_Str MSG_MIXER = _UxGT("Mikser");
|
|
PROGMEM Language_Str MSG_GRADIENT = _UxGT("Gradient");
|
|
PROGMEM Language_Str MSG_FULL_GRADIENT = _UxGT("Pełny gradient");
|
|
PROGMEM Language_Str MSG_TOGGLE_MIX = _UxGT("Przełacz miks");
|
|
PROGMEM Language_Str MSG_CYCLE_MIX = _UxGT("Cycle Mix");
|
|
PROGMEM Language_Str MSG_GRADIENT_MIX = _UxGT("Gradient Mix");
|
|
PROGMEM Language_Str MSG_REVERSE_GRADIENT = _UxGT("Odwrotny gradient");
|
|
PROGMEM Language_Str MSG_ACTIVE_VTOOL = _UxGT("Active V-tool");
|
|
PROGMEM Language_Str MSG_START_VTOOL = _UxGT("Start V-tool");
|
|
PROGMEM Language_Str MSG_END_VTOOL = _UxGT(" End V-tool");
|
|
PROGMEM Language_Str MSG_GRADIENT_ALIAS = _UxGT("Alias V-tool");
|
|
PROGMEM Language_Str MSG_RESET_VTOOLS = _UxGT("Reset V-tools");
|
|
PROGMEM Language_Str MSG_COMMIT_VTOOL = _UxGT("Commit V-tool Mix");
|
|
PROGMEM Language_Str MSG_VTOOLS_RESET = _UxGT("V-tools Were Reset");
|
|
PROGMEM Language_Str MSG_START_Z = _UxGT("Start Z:");
|
|
PROGMEM Language_Str MSG_END_Z = _UxGT(" End Z:");
|
|
|
|
PROGMEM Language_Str MSG_GAMES = _UxGT("Games");
|
|
PROGMEM Language_Str MSG_BRICKOUT = _UxGT("Brickout");
|
|
PROGMEM Language_Str MSG_INVADERS = _UxGT("Invaders");
|
|
PROGMEM Language_Str MSG_SNAKE = _UxGT("Sn4k3");
|
|
PROGMEM Language_Str MSG_MAZE = _UxGT("Maze");
|
|
|
|
#define MSG_1_LINE(A) A "\0" "\0"
|
|
#define MSG_2_LINE(A,B) A "\0" B "\0"
|
|
#define MSG_3_LINE(A,B,C) A "\0" B "\0" C
|
|
|
|
//
|
|
// Filament Change screens show up to 3 lines on a 4-line display
|
|
// ...or up to 2 lines on a 3-line display
|
|
//
|
|
#if LCD_HEIGHT >= 4
|
|
PROGMEM Language_Str MSG_ADVANCED_PAUSE_WAITING = _UxGT(MSG_2_LINE("Nacisnik przycisk", "by wznowić drukowanie"));
|
|
PROGMEM Language_Str MSG_PAUSE_PRINT_INIT = _UxGT(MSG_1_LINE("Parkowanie..."));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_3_LINE("Czekam na", "zmianę filamentu", "by wystartować"));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_3_LINE("Włóż filament", "i naciśnij przycisk", "by kontynuować"));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEAT = _UxGT(MSG_2_LINE("Naciśnij przycisk", "by nagrzać dyszę"));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEATING = _UxGT(MSG_2_LINE("Nagrzewanie dyszy", "Proszę czekać..."));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_2_LINE("Czekam na", "wyjęcie filamentu"));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_2_LINE("Czekam na", "włożenie filamentu"));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_PURGE = _UxGT(MSG_2_LINE("Czekam na", "oczyszczenie filamentu"));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_CONT_PURGE = _UxGT(MSG_2_LINE("Kliknij by zakończyć", "oczyszczanie filamentu"));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_2_LINE("Czekam na", "wznowienie wydruku..."));
|
|
#else
|
|
PROGMEM Language_Str MSG_ADVANCED_PAUSE_WAITING = _UxGT(MSG_1_LINE("Kliknij by kontynuować"));
|
|
PROGMEM Language_Str MSG_PAUSE_PRINT_INIT = _UxGT(MSG_1_LINE("Parkowanie..."));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_1_LINE("Proszę czekać..."));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_1_LINE("Włóż i kliknij"));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEAT = _UxGT(MSG_1_LINE("Kliknij by nagrzać"));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEATING = _UxGT(MSG_1_LINE("Nagrzewanie..."));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_1_LINE("Wysuwanie..."));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_1_LINE("Ładowanie..."));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_PURGE = _UxGT(MSG_1_LINE("Oczyszczanie..."));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_CONT_PURGE = _UxGT(MSG_1_LINE("Kliknij by zakończyć"));
|
|
PROGMEM Language_Str MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_1_LINE("Wznawianie..."));
|
|
#endif
|
|
PROGMEM Language_Str MSG_TMC_DRIVERS = _UxGT("TMC Drivers");
|
|
PROGMEM Language_Str MSG_TMC_CURRENT = _UxGT("Driver Current");
|
|
PROGMEM Language_Str MSG_TMC_HYBRID_THRS = _UxGT("Hybrid Threshold");
|
|
PROGMEM Language_Str MSG_TMC_HOMING_THRS = _UxGT("Sensorless Homing");
|
|
PROGMEM Language_Str MSG_TMC_STEPPING_MODE = _UxGT("Stepping Mode");
|
|
PROGMEM Language_Str MSG_TMC_STEALTH_ENABLED = _UxGT("StealthChop Enabled");
|
|
PROGMEM Language_Str MSG_SERVICE_RESET = _UxGT("Reset");
|
|
PROGMEM Language_Str MSG_SERVICE_IN = _UxGT(" in:");
|
|
PROGMEM Language_Str MSG_BACKLASH = _UxGT("Backlash");
|
|
PROGMEM Language_Str MSG_BACKLASH_A = LCD_STR_A;
|
|
PROGMEM Language_Str MSG_BACKLASH_B = LCD_STR_B;
|
|
PROGMEM Language_Str MSG_BACKLASH_C = LCD_STR_C;
|
|
PROGMEM Language_Str MSG_BACKLASH_CORRECTION = _UxGT("Correction");
|
|
PROGMEM Language_Str MSG_BACKLASH_SMOOTHING = _UxGT("Smoothing");
|
|
}
|
|
|