Marlin 2.0 for Flying Bear 4S/5
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

290 lines
7.0 KiB

---
language: c
#
before_install:
#
# Fetch the tag information for the current branch
- git fetch origin --tags
#
# Publish the buildroot script folder
- chmod +x ${TRAVIS_BUILD_DIR}/buildroot/bin/*
- ln -s ${TRAVIS_BUILD_DIR}/buildroot/bin/ ~/bin
#
# Start fb X server
- "/sbin/start-stop-daemon --start --quiet --pidfile /tmp/custom_xvfb_1.pid --make-pidfile --background --exec /usr/bin/Xvfb -- :1 -ac -screen 0 1280x1024x16"
- sleep 3
- export DISPLAY=:1.0
#
install:
#
# Install arduino 1.6.8
- wget http://downloads-02.arduino.cc/arduino-1.6.8-linux64.tar.xz
- tar xf arduino-1.6.8-linux64.tar.xz
- sudo mv arduino-1.6.8 /usr/local/share/arduino
- ln -s /usr/local/share/arduino/arduino ${TRAVIS_BUILD_DIR}/buildroot/bin/arduino
#
# Install: LiquidCrystal_I2C library
- git clone https://github.com/kiyoshigawa/LiquidCrystal_I2C.git
- mv LiquidCrystal_I2C/LiquidCrystal_I2C /usr/local/share/arduino/libraries/LiquidCrystal_I2C
#
# Install: LiquidTWI2 library
- git clone https://github.com/lincomatic/LiquidTWI2.git
- sudo mv LiquidTWI2 /usr/local/share/arduino/libraries/LiquidTWI2
#
# Install: Monochrome Graphics Library for LCDs and OLEDs
- arduino --install-library "U8glib"
#
# Install: L6470 Stepper Motor Driver library
- git clone https://github.com/ameyer/Arduino-L6470.git
- sudo mv Arduino-L6470/L6470 /usr/local/share/arduino/libraries/L6470
#
# Install: TMC26X Stepper Motor Controller library
- git clone https://github.com/trinamic/TMC26XStepper.git
- sudo mv TMC26XStepper /usr/local/share/arduino/libraries/TMC26XStepper
#
before_script:
#
# Change current working directory to the build dir
- cd ${TRAVIS_BUILD_DIR}
#
# Generate custom version include
- generate_version_header_for_marlin ${TRAVIS_BUILD_DIR}/Marlin
- cat ${TRAVIS_BUILD_DIR}/Marlin/_Version.h
#
script:
#
# Backup Configuration.h, Configuration_adv.h, and pins_RAMPS_14.h
#
- cp Marlin/Configuration.h Marlin/Configuration.h.backup
- cp Marlin/Configuration_adv.h Marlin/Configuration_adv.h.backup
- cp Marlin/pins_RAMPS_14.h Marlin/pins_RAMPS_14.h.backup
#
# Build with the default configurations
#
- build_marlin
#
# Test heated bed temperature sensor
#
- opt_set TEMP_SENSOR_BED 1
- build_marlin
#
# Test 2 extruders on basic RAMPS 1.4
#
- opt_set MOTHERBOARD BOARD_RAMPS_14_EEB
- opt_set EXTRUDERS 2
- opt_set TEMP_SENSOR_1 1
- build_marlin
#
# Test 3 extruders on RUMBA (can use any board with >=3 extruders defined)
#
- opt_set MOTHERBOARD BOARD_RUMBA
- opt_set EXTRUDERS 3
- opt_set TEMP_SENSOR_2 1
- build_marlin
#
# Test PIDTEMPBED
#
- restore_configs
- opt_enable PIDTEMPBED
- build_marlin
#
# Test AUTO_BED_LEVELING & DEBUG_LEVELING_FEATURE
#
- restore_configs
- opt_enable ENABLE_AUTO_BED_LEVELING DEBUG_LEVELING_FEATURE
- build_marlin
#
# Test MESH_BED_LEVELING feature, with LCD
#
- restore_configs
- opt_enable MESH_BED_LEVELING MESH_G28_REST_ORIGIN MANUAL_BED_LEVELING ULTIMAKERCONTROLLER
- build_marlin
#
# Test AUTO_BED_LEVELING & DEBUG_LEVELING_FEATURE with Servos
#
- opt_enable NUM_SERVOS Z_ENDSTOP_SERVO_NR SERVO_ENDSTOP_ANGLES DEACTIVATE_SERVOS_AFTER_MOVE
- build_marlin
#
# Test EEPROM_SETTINGS, EEPROM_CHITCHAT, M100_FREE_MEMORY_WATCHER, INCH_MODE_SUPPORT, TEMPERATURE_UNITS_SUPPORT
#
- restore_configs
- opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT M100_FREE_MEMORY_WATCHER INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT
- build_marlin
#
# Test DUAL_X_CARRIAGE
#
- restore_configs
- opt_set MOTHERBOARD BOARD_RUMBA
- opt_set EXTRUDERS 2
- opt_set TEMP_SENSOR_1 1
- opt_enable USE_XMAX_PLUG
- opt_enable_adv DUAL_X_CARRIAGE
- build_marlin
#
### LCDS ###
#
#
# ULTIMAKERCONTROLLER
#
- restore_configs
- opt_enable ULTIMAKERCONTROLLER
- build_marlin
#
# MAKRPANEL
# Needs to use Melzi and Sanguino hardware
#
#- restore_configs
#- opt_enable MAKRPANEL
#- build_marlin
#
# REPRAP_DISCOUNT_SMART_CONTROLLER, SDSUPPORT, and BABYSTEPPING
#
- restore_configs
- opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT BABYSTEPPING
- build_marlin
#
# G3D_PANEL
#
- restore_configs
- opt_enable G3D_PANEL SDSUPPORT
- build_marlin
#
# REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
#
- restore_configs
- opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT
- build_marlin
#
# REPRAPWORLD_KEYPAD
#
# Cant find configuration details to get it to compile
#- restore_configs
#- opt_enable ULTRA_LCD REPRAPWORLD_KEYPAD REPRAPWORLD_KEYPAD_MOVE_STEP
#- build_marlin
#
# RA_CONTROL_PANEL
#
- restore_configs
- opt_enable RA_CONTROL_PANEL
- build_marlin
#
### I2C PANELS ###
#
# LCD_I2C_SAINSMART_YWROBOT
# Failing at the moment needs different library
#- restore_configs
#- opt_enable LCD_I2C_SAINSMART_YWROBOT
#- build_marlin
#
# LCD_I2C_PANELOLU2
#
- restore_configs
- opt_enable LCD_I2C_PANELOLU2
- build_marlin
#
# LCD_I2C_VIKI
#
- restore_configs
- opt_enable LCD_I2C_VIKI
- build_marlin
#
# LCM1602
#
- restore_configs
- opt_enable LCM1602
- build_marlin
#
# Enable FILAMENTCHANGEENABLE
#
- restore_configs
- opt_enable FILAMENTCHANGEENABLE ULTIMAKERCONTROLLER
- build_marlin
#
# Enable filament sensor
#
- restore_configs
- opt_enable FILAMENT_WIDTH_SENSOR
- build_marlin
#
# Enable filament sensor with LCD display
#
- opt_enable ULTIMAKERCONTROLLER FILAMENT_LCD_DISPLAY
- build_marlin
#
# Enable BEZIER_CURVE_SUPPORT
#
- restore_configs
- opt_enable_adv BEZIER_CURVE_SUPPORT
- build_marlin
#
# Enable COREXY
#
- restore_configs
- opt_enable COREXY
- build_marlin
#
# Enable COREXZ
#
- restore_configs
- opt_enable COREXZ
- build_marlin
#
# Enable Z_DUAL_STEPPER_DRIVERS, Z_DUAL_ENDSTOPS
#
- restore_configs
- opt_enable_adv Z_DUAL_STEPPER_DRIVERS Z_DUAL_ENDSTOPS
- pins_set RAMPS_14 X_MAX_PIN -1
- opt_set_adv Z2_MAX_PIN 2
- build_marlin
#
# Test PRINTCOUNTER
#
- restore_configs
- opt_enable PRINTCOUNTER
- build_marlin
#
#
######## Example Configurations ##############
#
# BQ Hephestos 2
- restore_configs
- use_example_configs Hephestos_2
- build_marlin
#
# Delta Config (generic)
- restore_configs
- use_example_configs delta/generic
- build_marlin
#
# Delta Config (generic) + ABL + ALLEN_KEY
#
- use_example_configs delta/generic
- opt_disable DISABLE_MIN_ENDSTOPS
- opt_enable AUTO_BED_LEVELING_FEATURE Z_PROBE_ALLEN_KEY
- build_marlin
#
# Delta Config (Mini Kossel)
#
- use_example_configs delta/kossel_mini
- build_marlin
#
# Makibox Config need to check board type for Teensy++ 2.0
#
#- use_example_configs makibox
#- build_marlin
#
# SCARA Config
#
- use_example_configs SCARA
- build_marlin
#
# tvrrug Config need to check board type for sanguino atmega644p
#
#- use_example_configs tvrrug/Round2
#- build_marlin
#
#
######## Board Types #############
#
# To be added in nightly test branch
#