Marlin 2.0 for Flying Bear 4S/5
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

177 lines
5.5 KiB

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Rev B 2 JUN 2017
*
* Converted to Arduino pin numbering
*/
/**
* There are two Arduino IDE extensions that are compatible with this board
* and with the mainstream Marlin software.
*
* Teensyduino - http://www.pjrc.com/teensy/teensyduino.html
* Select Teensy++ 2.0 in Arduino IDE from the 'Tools -> Boards' menu
*
* Installation instructions are at the above URL. Don't bother loading the
* libraries - they are not used with the Marlin software.
*
* Printrboard - https://github.com/scwimbush/Printrboard-HID-Arduino-IDE-Support
*
* Installation:
*
* 1. Go to the above URL, click on the "Clone or Download" button and then
* click on "Download ZIP" button.
* 2. Unzip the file, find the "printrboard" directory and then copy it to the
* hardware directory in Arduino. The Arduino hardware directory will probably
* be located in a path similar to this: C:\Program Files (x86)\Arduino\hardware.
* 3. Restart Arduino.
* 4. Select "Printrboard" from the 'Tools -> Boards' menu.
*
* Teensyduino is the most popular option. Printrboard is used if your board doesn't have
* the Teensyduino bootloader on it.
*/
/**
* To burn the bootloader that comes with Printrboard:
*
* 1. Connect your programmer to the board.
* 2. In the Arduino IDE select "Printrboard" and then select the programmer.
* 3. In the Arduino IDE click on "burn bootloader". Don't worry about the "verify failed at 1F000" error message.
* 4. The programmer is no longer needed. Remove it.
*/
#ifndef __AVR_AT90USB1286__
#error "Oops! Make sure you have 'Teensy++ 2.0' or 'Printrboard' selected from the 'Tools -> Boards' menu."
#endif
#define BOARD_NAME "Printrboard"
#define LARGE_FLASH true
// Disable JTAG pins so they can be used for the Extrudrboard
#define DISABLE_JTAG true
//
// Limit Switches
//
#define X_STOP_PIN 47 // E3
#if ENABLED(SDSUPPORT)
#define Y_STOP_PIN 37 // E5 - Move Ystop to Estop socket
#else
#define Y_STOP_PIN 20 // B0 SS - Ystop in Ystop socket
#endif
#define Z_STOP_PIN 36 // E4
//
// Steppers
//
#define X_STEP_PIN 28 // A0
#define X_DIR_PIN 29 // A1
#define X_ENABLE_PIN 19 // E7
#define Y_STEP_PIN 30 // A2
#define Y_DIR_PIN 31 // A3
#define Y_ENABLE_PIN 18 // E6
#define Z_STEP_PIN 32 // A4
#define Z_DIR_PIN 33 // A5
#define Z_ENABLE_PIN 17 // C7
#define E0_STEP_PIN 34 // A6
#define E0_DIR_PIN 35 // A7
#define E0_ENABLE_PIN 13 // C3
//
// Temperature Sensors
//
#define TEMP_0_PIN 1 // Analog Input
#define TEMP_BED_PIN 0 // Analog Input
//
// Heaters / Fans
//
#define HEATER_0_PIN 15 // C5 PWM3B - Extruder
#define HEATER_1_PIN 44 // F6
#define HEATER_2_PIN 45 // F7
#define HEATER_BED_PIN 14 // C4 PWM3C
#define FAN_PIN 16 // C6 PWM3A
//
// Misc. Functions
//
#define SDSS 20 // B0 SS
#define FILWIDTH_PIN 2 // Analog Input
//
// LCD / Controller
//
#if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)
// we have no buzzer installed
#define BEEPER_PIN -1
// LCD Pins
#if ENABLED(LCD_I2C_PANELOLU2)
#define BTN_EN1 3 // D3 RX1 JP2-7
#define BTN_EN2 2 // D2 TX1 JP2-5
#define BTN_ENC 41 // F3 JP2-4
#define SDSS 38 // F0 B-THERM connector - use SD card on Panelolu2
#else
#define BTN_EN1 10 // C0 JP11-12
#define BTN_EN2 11 // C1 JP11-13
#define BTN_ENC 12 // C2 JP11-14
#endif
// not connected
#define SD_DETECT_PIN -1
#define LCD_PINS_RS 9 // E1 JP11-11
#define LCD_PINS_ENABLE 8 // E0 JP11-10
#define LCD_PINS_D4 7 // D7 JP11-8
#define LCD_PINS_D5 6 // D6 JP11-7
#define LCD_PINS_D6 5 // D5 JP11-6
#define LCD_PINS_D7 4 // D4 JP11-5
#endif // ULTRA_LCD && NEWPANEL
#if ENABLED(VIKI2) || ENABLED(miniVIKI)
#define BEEPER_PIN 8 // E0 JP11-10
// Pins for DOGM SPI LCD Support
#define DOGLCD_A0 40 // F2 JP2-2
#define DOGLCD_CS 41 // F3 JP2-4
#define LCD_SCREEN_ROT_180
// The encoder and click button
#define BTN_EN1 2 // D2 TX1 JP2-5
#define BTN_EN2 3 // D3 RX1 JP2-7
#define BTN_ENC 45 // F7 TDI JP2-12
#define SDSS 43 // F5 TMS JP2-8
#define SD_DETECT_PIN -1
#define STAT_LED_RED_PIN 12 // C2 JP11-14
#define STAT_LED_BLUE_PIN 10 // C0 JP11-12
#endif