Marlin_FB4S/Marlin/language_gl.h


								/**

								 * Marlin 3D Printer Firmware

								 * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]

								 *

								 * Based on Sprinter and grbl.

								 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm

								 *

								 * This program is free software: you can redistribute it and/or modify

								 * it under the terms of the GNU General Public License as published by

								 * the Free Software Foundation, either version 3 of the License, or

								 * (at your option) any later version.

								 *

								 * This program is distributed in the hope that it will be useful,

								 * but WITHOUT ANY WARRANTY; without even the implied warranty of

								 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

								 * GNU General Public License for more details.

								 *

								 * You should have received a copy of the GNU General Public License

								 * along with this program.  If not, see <http://www.gnu.org/licenses/>.

								 *

								 */


								/**

								 * Galician language (ISO "gl")

								 *

								 * LCD Menu Messages

								 * See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language

								 *

								 */

								#ifndef LANGUAGE_GL_H

								#define LANGUAGE_GL_H


								#define MAPPER_C2C3

								#define DISPLAY_CHARSET_ISO10646_1


								#define WELCOME_MSG                         MACHINE_NAME " lista."

								#define MSG_SD_INSERTED                     "Tarxeta inserida"

								#define MSG_SD_REMOVED                      "Tarxeta retirada"

								#define MSG_LCD_ENDSTOPS                    "FinCarro"

								#define MSG_MAIN                            "Menu principal"

								#define MSG_AUTOSTART                       "Autoarranque"

								#define MSG_DISABLE_STEPPERS                "Apagar motores"

								#define MSG_AUTO_HOME                       "Ir a orixe"

								#define MSG_AUTO_HOME_X                     "Ir orixe X"

								#define MSG_AUTO_HOME_Y                     "Ir orixe Y"

								#define MSG_AUTO_HOME_Z                     "Ir orixe Z"

								#define MSG_LEVEL_BED_HOMING                "Ir orixes XYZ"

								#define MSG_LEVEL_BED_WAITING               "Prema pulsador"

								#define MSG_LEVEL_BED_NEXT_POINT            "Seguinte punto"

								#define MSG_LEVEL_BED_DONE                  "Nivelado feito"

								#define MSG_LEVEL_BED_CANCEL                "Cancelar"

								#define MSG_SET_HOME_OFFSETS                "Offsets na orixe"

								#define MSG_HOME_OFFSETS_APPLIED            "Offsets fixados"

								#define MSG_SET_ORIGIN                      "Fixar orixe"

								#define MSG_PREHEAT_1                       "Prequentar PLA"

								#define MSG_PREHEAT_1_N                     "Prequentar PLA "

								#define MSG_PREHEAT_1_ALL                   "Preque. PLA Todo"

								#define MSG_PREHEAT_1_BEDONLY               "Preque. PLA Cama"

								#define MSG_PREHEAT_1_SETTINGS              "Preque. PLA conf"

								#define MSG_PREHEAT_2                       "Prequentar ABS"

								#define MSG_PREHEAT_2_N                     "Prequentar ABS "

								#define MSG_PREHEAT_2_ALL                   "Preque. ABS Todo"

								#define MSG_PREHEAT_2_BEDONLY               "Preque. ABS Cama"

								#define MSG_PREHEAT_2_SETTINGS              "Preque. ABS conf"

								#define MSG_COOLDOWN                        "Arrefriar"

								#define MSG_SWITCH_PS_ON                    "Acender"

								#define MSG_SWITCH_PS_OFF                   "Apagar"

								#define MSG_EXTRUDE                         "Extrudir"

								#define MSG_RETRACT                         "Retraer"

								#define MSG_MOVE_AXIS                       "Mover eixe"

								#define MSG_LEVEL_BED                       "Nivelar cama"

								#define MSG_MOVE_X                          "Mover X"

								#define MSG_MOVE_Y                          "Mover Y"

								#define MSG_MOVE_Z                          "Mover Z"

								#define MSG_MOVE_E                          "Extrusor"

								#define MSG_MOVE_01MM                       "Mover 0.1mm"

								#define MSG_MOVE_1MM                        "Mover 1mm"

								#define MSG_MOVE_10MM                       "Mover 10mm"

								#define MSG_SPEED                           "Velocidade"

								#define MSG_BED_Z                           "Cama Z"

								#define MSG_NOZZLE                          "Bico"

								#define MSG_BED                             "Cama"

								#define MSG_FAN_SPEED                       "Velocidade vent."

								#define MSG_FLOW                            "Fluxo"

								#define MSG_CONTROL                         "Control"

								#define MSG_MIN                             " " LCD_STR_THERMOMETER " Min"

								#define MSG_MAX                             " " LCD_STR_THERMOMETER " Max"

								#define MSG_FACTOR                          " " LCD_STR_THERMOMETER " Fact"

								#define MSG_AUTOTEMP                        "Autotemp"

								#define MSG_ON                              "On "

								#define MSG_OFF                             "Off"

								#define MSG_PID_P                           "PID-P"

								#define MSG_PID_I                           "PID-I"

								#define MSG_PID_D                           "PID-D"

								#define MSG_PID_C                           "PID-C"

								#define MSG_SELECT                          "Escolla"

								#define MSG_ACC                             "Acel"

								#define MSG_VX_JERK                         "Vx-jerk"

								#define MSG_VY_JERK                         "Vy-jerk"

								#define MSG_VZ_JERK                         "Vz-jerk"

								#define MSG_VE_JERK                         "Ve-jerk"

								#define MSG_VMAX                            "Vmax "

								#define MSG_VMIN                            "Vmin"

								#define MSG_VTRAV_MIN                       "VTrav min"

								#define MSG_AMAX                            "Amax "

								#define MSG_A_RETRACT                       "A-retract"

								#define MSG_A_TRAVEL                        "A-travel"

								#define MSG_XSTEPS                          "Xpasos/mm"

								#define MSG_YSTEPS                          "Ypasos/mm"

								#define MSG_ZSTEPS                          "Zpasos/mm"

								#define MSG_ESTEPS                          "Epasos/mm"

								#define MSG_TEMPERATURE                     "Temperatura"

								#define MSG_MOTION                          "Movemento"

								#define MSG_VOLUMETRIC                      "Filamento"

								#define MSG_VOLUMETRIC_ENABLED              "E en mm3"

								#define MSG_FILAMENT_DIAM                   "Diam. fil."

								#define MSG_CONTRAST                        "Constraste LCD"

								#define MSG_STORE_EPROM                     "Gardar en memo."

								#define MSG_LOAD_EPROM                      "Cargar de memo."

								#define MSG_RESTORE_FAILSAFE                "Cargar de firm."

								#define MSG_REFRESH                         "Volver a cargar"

								#define MSG_WATCH                           "Monitorizacion"

								#define MSG_PREPARE                         "Preparar"

								#define MSG_TUNE                            "Axustar"

								#define MSG_PAUSE_PRINT                     "Pausar impres."

								#define MSG_RESUME_PRINT                    "Seguir impres."

								#define MSG_STOP_PRINT                      "Deter impres."

								#define MSG_CARD_MENU                       "Tarxeta SD"

								#define MSG_NO_CARD                         "Sen tarxeta SD"

								#define MSG_DWELL                           "En repouso..."

								#define MSG_USERWAIT                        "A espera..."

								#define MSG_RESUMING                        "Imprimindo..."

								#define MSG_PRINT_ABORTED                   "Impre. cancelada"

								#define MSG_NO_MOVE                         "Sen movemento."

								#define MSG_KILLED                          "PROGRAMA MORTO"

								#define MSG_STOPPED                         "PROGRAMA PARADO"

								#define MSG_CONTROL_RETRACT                 "Retraccion mm"

								#define MSG_CONTROL_RETRACT_SWAP            "Cambio retra. mm"

								#define MSG_CONTROL_RETRACTF                "Retraccion V"

								#define MSG_CONTROL_RETRACT_ZLIFT           "Alzar Z mm"

								#define MSG_CONTROL_RETRACT_RECOVER         "Recup. retra. mm"

								#define MSG_CONTROL_RETRACT_RECOVER_SWAP    "Cambio recup. mm"

								#define MSG_CONTROL_RETRACT_RECOVERF        "Recuperacion V"

								#define MSG_AUTORETRACT                     "Retraccion auto."

								#define MSG_FILAMENTCHANGE                  "Cambiar filamen."

								#define MSG_INIT_SDCARD                     "Iniciando SD"

								#define MSG_CNG_SDCARD                      "Cambiar SD"

								#define MSG_ZPROBE_OUT                      "Sonda-Z sen cama"

								#define MSG_HOME                            "Home"  // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST

								#define MSG_BLTOUCH_SELFTEST                "Comprobar BLTouch"

								#define MSG_BLTOUCH_RESET                   "Iniciar BLTouch"

								#define MSG_FIRST                           "first"

								#define MSG_ZPROBE_ZOFFSET                  "Offset Z"

								#define MSG_BABYSTEP_X                      "Micropaso X"

								#define MSG_BABYSTEP_Y                      "Micropaso Y"

								#define MSG_BABYSTEP_Z                      "Micropaso Z"

								#define MSG_ENDSTOP_ABORT                   "Erro fin carro"

								#define MSG_HEATING_FAILED_LCD              "Fallo quentando"

								#define MSG_ERR_REDUNDANT_TEMP              "Erro temperatura"

								#define MSG_THERMAL_RUNAWAY                 "Temp. excesiva"

								#define MSG_ERR_MAXTEMP                     "Err: temp. max."

								#define MSG_ERR_MINTEMP                     "Err: temp. min."

								#define MSG_ERR_MAXTEMP_BED                 "Err: MAXTEMP BED"

								#define MSG_ERR_MINTEMP_BED                 "Err: MINTEMP BED"

								#define MSG_ERR_Z_HOMING                    "G28 Z impedido"

								#define MSG_HALTED                          "SISTEMA MORTO"

								#define MSG_PLEASE_RESET                    "Debe reiniciar!"

								#define MSG_SHORT_DAY                       "d" // One character only

								#define MSG_SHORT_HOUR                      "h" // One character only

								#define MSG_SHORT_MINUTE                    "m" // One character only

								#define MSG_HEATING                         "Quentando..."

								#define MSG_HEATING_COMPLETE                "Xa esta quente"

								#define MSG_BED_HEATING                     "Quentando cama"

								#define MSG_BED_DONE                        "Cama esta quente"

								#define MSG_DELTA_CALIBRATE                 "Calibracion Delta"

								#define MSG_DELTA_CALIBRATE_X               "Calibrar X"

								#define MSG_DELTA_CALIBRATE_Y               "Calibrar Y"

								#define MSG_DELTA_CALIBRATE_Z               "Calibrar Z"

								#define MSG_DELTA_CALIBRATE_CENTER          "Calibrar Centro"

								#define MSG_INFO_MENU                       "Acerca de..."

								#define MSG_INFO_PRINTER_MENU               "Informacion"

								#define MSG_INFO_STATS_MENU                 "Estadisticas"

								#define MSG_INFO_BOARD_MENU                 "Placa nai"

								#define MSG_INFO_THERMISTOR_MENU            "Termistores"

								#define MSG_INFO_EXTRUDERS                  "Extrusores"

								#define MSG_INFO_BAUDRATE                   "Baudios"

								#define MSG_INFO_PROTOCOL                   "Protocolo"

								#define MSG_LIGHTS_ON                       "Acender a luz"

								#define MSG_LIGHTS_OFF                      "Apagar a luz"

								#if LCD_WIDTH >= 20

								  #define MSG_INFO_PRINT_COUNT              "Total traballos"

								  #define MSG_INFO_COMPLETED_PRINTS         "Total completos"

								  #define MSG_INFO_PRINT_TIME               "Tempo impresion"

								  #define MSG_INFO_PRINT_LONGEST            "Traballo +longo"

								  #define MSG_INFO_PRINT_FILAMENT           "Total extruido"

								#else

								  #define MSG_INFO_PRINT_COUNT              "Traballos"

								  #define MSG_INFO_COMPLETED_PRINTS         "Completos"

								  #define MSG_INFO_PRINT_TIME               "Tempo"

								  #define MSG_INFO_PRINT_LONGEST            "O +longo"

								  #define MSG_INFO_PRINT_FILAMENT           "Extruido"

								#endif

								#define MSG_INFO_MIN_TEMP                   "Min Temp"

								#define MSG_INFO_MAX_TEMP                   "Max Temp"

								#define MSG_INFO_PSU                        "Fonte alime."

								#define MSG_DRIVE_STRENGTH                  "Potencia motor"

								#define MSG_DAC_PERCENT                     "Motor %"

								#define MSG_DAC_EEPROM_WRITE                "Garda DAC EEPROM"

								#define MSG_FILAMENT_CHANGE_HEADER          "TROCO FILAMENTO"

								#define MSG_FILAMENT_CHANGE_OPTION_HEADER   "OPCIONS TROCO:"

								#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE  "Extruir mais"

								#define MSG_FILAMENT_CHANGE_OPTION_RESUME   "Segue traballo"

								#if LCD_HEIGHT >= 4

								  #define MSG_FILAMENT_CHANGE_INIT_1          "Agarde para"

								  #define MSG_FILAMENT_CHANGE_INIT_2          "iniciar troco"

								  #define MSG_FILAMENT_CHANGE_INIT_3          "de filamento"

								  #define MSG_FILAMENT_CHANGE_UNLOAD_1        "Agarde pola"

								  #define MSG_FILAMENT_CHANGE_UNLOAD_2        "descarga do"

								  #define MSG_FILAMENT_CHANGE_UNLOAD_3        "filamento"

								  #define MSG_FILAMENT_CHANGE_INSERT_1        "Introduza o"

								  #define MSG_FILAMENT_CHANGE_INSERT_2        "filamento e"

								  #define MSG_FILAMENT_CHANGE_INSERT_3        "faga click"

								  #define MSG_FILAMENT_CHANGE_LOAD_1          "Agarde pola"

								  #define MSG_FILAMENT_CHANGE_LOAD_2          "carga do"

								  #define MSG_FILAMENT_CHANGE_LOAD_3          "filamento"

								  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       "Agarde pola"

								  #define MSG_FILAMENT_CHANGE_EXTRUDE_2       "extrusion do"

								  #define MSG_FILAMENT_CHANGE_EXTRUDE_3       "filamento"

								  #define MSG_FILAMENT_CHANGE_RESUME_1        "Agarde para"

								  #define MSG_FILAMENT_CHANGE_RESUME_2        "seguir co"

								  #define MSG_FILAMENT_CHANGE_RESUME_3        "traballo"

								#else // LCD_HEIGHT < 4

								  #define MSG_FILAMENT_CHANGE_INIT_1          "Agarde..."

								  #define MSG_FILAMENT_CHANGE_UNLOAD_1        "Descargando..."

								  #define MSG_FILAMENT_CHANGE_INSERT_1        "Introduza e click"

								  #define MSG_FILAMENT_CHANGE_LOAD_1          "Cargando..."

								  #define MSG_FILAMENT_CHANGE_EXTRUDE_1       "Extruindo..."

								  #define MSG_FILAMENT_CHANGE_RESUME_1        "Seguindo..."

								#endif // LCD_HEIGHT < 4


								#endif // LANGUAGE_GL_H