/** * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ #pragma once /** * Traditional Chinese * * LCD Menu Messages * See also http://marlinfw.org/docs/development/lcd_language.html * */ namespace Language_zh_TW { using namespace Language_en; // Inherit undefined strings from English constexpr uint8_t CHARSIZE = 3; PROGMEM Language_Str LANGUAGE = _UxGT("Traditional Chinese"); PROGMEM Language_Str WELCOME_MSG = MACHINE_NAME _UxGT("已就緒."); //" ready." PROGMEM Language_Str MSG_BACK = _UxGT("返回"); // ”Back“ PROGMEM Language_Str MSG_MEDIA_INSERTED = _UxGT("記憶卡已插入"); //"Card inserted" PROGMEM Language_Str MSG_MEDIA_REMOVED = _UxGT("記憶卡被拔出"); //"Card removed" PROGMEM Language_Str MSG_LCD_ENDSTOPS = _UxGT("擋塊"); //"Endstops" // Max length 8 characters PROGMEM Language_Str MSG_MAIN = _UxGT("主選單"); //"Main" PROGMEM Language_Str MSG_AUTOSTART = _UxGT("自動開始"); //"Autostart" PROGMEM Language_Str MSG_DISABLE_STEPPERS = _UxGT("關閉步進馬達"); //"Disable steppers" PROGMEM Language_Str MSG_DEBUG_MENU = _UxGT("除錯選單"); // "Debug Menu" PROGMEM Language_Str MSG_PROGRESS_BAR_TEST = _UxGT("進度條測試"); // "Progress Bar Test" PROGMEM Language_Str MSG_AUTO_HOME = _UxGT("自動回原點"); //"Auto home" PROGMEM Language_Str MSG_AUTO_HOME_X = _UxGT("回X原點"); //"Home X" PROGMEM Language_Str MSG_AUTO_HOME_Y = _UxGT("回Y原點"); //"Home Y" PROGMEM Language_Str MSG_AUTO_HOME_Z = _UxGT("回Z原點"); //"Home Z" PROGMEM Language_Str MSG_LEVEL_BED_HOMING = _UxGT("平台調平XYZ歸原點"); //"Homing XYZ" PROGMEM Language_Str MSG_LEVEL_BED_WAITING = _UxGT("單擊開始熱床調平"); //"Click to Begin" PROGMEM Language_Str MSG_LEVEL_BED_NEXT_POINT = _UxGT("下個熱床調平點"); //"Next Point" PROGMEM Language_Str MSG_LEVEL_BED_DONE = _UxGT("完成熱床調平"); //"Leveling Done!" PROGMEM Language_Str MSG_Z_FADE_HEIGHT = _UxGT("淡出高度"); // "Fade Height" PROGMEM Language_Str MSG_SET_HOME_OFFSETS = _UxGT("設置原點偏移"); //"Set home offsets" PROGMEM Language_Str MSG_HOME_OFFSETS_APPLIED = _UxGT("偏移已啟用"); //"Offsets applied" PROGMEM Language_Str MSG_SET_ORIGIN = _UxGT("設置原點"); //"Set origin" PROGMEM Language_Str MSG_PREHEAT_1 = _UxGT("預熱 ") PREHEAT_1_LABEL; //"Preheat PREHEAT_1_LABEL" PROGMEM Language_Str MSG_PREHEAT_1_H = _UxGT("預熱 ") PREHEAT_1_LABEL " ~"; //"Preheat PREHEAT_1_LABEL" PROGMEM Language_Str MSG_PREHEAT_1_END = _UxGT("預熱 ") PREHEAT_1_LABEL _UxGT(" 噴嘴"); //MSG_PREHEAT_1 " " PROGMEM Language_Str MSG_PREHEAT_1_END_E = _UxGT("預熱 ") PREHEAT_1_LABEL _UxGT(" 噴嘴 ~"); //MSG_PREHEAT_1 " " PROGMEM Language_Str MSG_PREHEAT_1_ALL = _UxGT("預熱 ") PREHEAT_1_LABEL _UxGT(" 全部"); //MSG_PREHEAT_1 " All" PROGMEM Language_Str MSG_PREHEAT_1_BEDONLY = _UxGT("預熱 ") PREHEAT_1_LABEL _UxGT(" 熱床"); //MSG_PREHEAT_1 " Bed" PROGMEM Language_Str MSG_PREHEAT_1_SETTINGS = _UxGT("預熱 ") PREHEAT_1_LABEL _UxGT(" 設置"); //MSG_PREHEAT_1 " conf" PROGMEM Language_Str MSG_PREHEAT_2 = _UxGT("預熱 ") PREHEAT_2_LABEL; //"Preheat PREHEAT_2_LABEL" PROGMEM Language_Str MSG_PREHEAT_2_H = _UxGT("預熱 ") PREHEAT_2_LABEL " ~"; //"Preheat PREHEAT_2_LABEL" PROGMEM Language_Str MSG_PREHEAT_2_END = _UxGT("預熱 ") PREHEAT_2_LABEL _UxGT(" 噴嘴"); //MSG_PREHEAT_2 " " PROGMEM Language_Str MSG_PREHEAT_2_END_E = _UxGT("預熱 ") PREHEAT_2_LABEL _UxGT(" 噴嘴 ~"); //MSG_PREHEAT_2 " " PROGMEM Language_Str MSG_PREHEAT_2_ALL = _UxGT("預熱 ") PREHEAT_2_LABEL _UxGT(" 全部"); //MSG_PREHEAT_2 " All" PROGMEM Language_Str MSG_PREHEAT_2_BEDONLY = _UxGT("預熱 ") PREHEAT_2_LABEL _UxGT(" 熱床"); //MSG_PREHEAT_2 " Bed" PROGMEM Language_Str MSG_PREHEAT_2_SETTINGS = _UxGT("預熱 ") PREHEAT_2_LABEL _UxGT(" 設置"); //MSG_PREHEAT_2 " conf" PROGMEM Language_Str MSG_COOLDOWN = _UxGT("降溫"); //"Cooldown" PROGMEM Language_Str MSG_SWITCH_PS_ON = _UxGT("電源打開"); //"Switch power on" PROGMEM Language_Str MSG_SWITCH_PS_OFF = _UxGT("電源關閉"); //"Switch power off" PROGMEM Language_Str MSG_EXTRUDE = _UxGT("擠出"); //"Extrude" PROGMEM Language_Str MSG_RETRACT = _UxGT("回縮"); //"Retract" PROGMEM Language_Str MSG_MOVE_AXIS = _UxGT("移動軸"); //"Move axis" PROGMEM Language_Str MSG_BED_LEVELING = _UxGT("調平熱床"); //"Bed leveling" PROGMEM Language_Str MSG_LEVEL_BED = _UxGT("調平熱床"); //"Level bed" PROGMEM Language_Str MSG_LEVEL_CORNERS = _UxGT("調平邊角"); // "Level corners" PROGMEM Language_Str MSG_NEXT_CORNER = _UxGT("下個邊角"); // "Next corner" PROGMEM Language_Str MSG_EDIT_MESH = _UxGT("編輯網格"); // "Edit Mesh" PROGMEM Language_Str MSG_EDITING_STOPPED = _UxGT("網格編輯已停止"); // "Mesh Editing Stopped" PROGMEM Language_Str MSG_USER_MENU = _UxGT("客制命令"); // "Custom Commands" PROGMEM Language_Str MSG_UBL_DOING_G29 = _UxGT("執行G29"); // "Doing G29" PROGMEM Language_Str MSG_UBL_TOOLS = _UxGT("UBL工具"); // "UBL Tools" PROGMEM Language_Str MSG_UBL_LEVEL_BED = _UxGT("統一熱床調平(UBL)"); // "Unified Bed Leveling" PROGMEM Language_Str MSG_UBL_MANUAL_MESH = _UxGT("手工建網"); // "Manually Build Mesh" PROGMEM Language_Str MSG_UBL_BC_INSERT = _UxGT("放置墊片並測量"); // "Place shim & measure" PROGMEM Language_Str MSG_UBL_BC_INSERT2 = _UxGT("測量"); // "Measure" PROGMEM Language_Str MSG_UBL_BC_REMOVE = _UxGT("移除並測量熱床"); // "Remove & measure bed" PROGMEM Language_Str MSG_UBL_MOVING_TO_NEXT = _UxGT("移動到下一個"); // "Moving to next" PROGMEM Language_Str MSG_UBL_ACTIVATE_MESH = _UxGT("啟動UBL"); // "Activate UBL" PROGMEM Language_Str MSG_UBL_DEACTIVATE_MESH = _UxGT("關閉UBL"); // "Deactivate UBL" PROGMEM Language_Str MSG_UBL_SET_TEMP_BED = _UxGT("設置熱床溫度"); // "Bed Temp" PROGMEM Language_Str MSG_UBL_SET_TEMP_HOTEND = _UxGT("熱端溫度"); // "Hotend Temp" PROGMEM Language_Str MSG_UBL_MESH_EDIT = _UxGT("網格編輯"); // "Mesh Edit" PROGMEM Language_Str MSG_UBL_EDIT_CUSTOM_MESH = _UxGT("編輯客戶網格"); // "Edit Custom Mesh" PROGMEM Language_Str MSG_UBL_FINE_TUNE_MESH = _UxGT("細調網格"); // "Fine Tuning Mesh" PROGMEM Language_Str MSG_UBL_DONE_EDITING_MESH = _UxGT("完成編輯網格"); // "Done Editing Mesh" PROGMEM Language_Str MSG_UBL_BUILD_CUSTOM_MESH = _UxGT("創設客戶網格"); // "Build Custom Mesh" PROGMEM Language_Str MSG_UBL_BUILD_MESH_MENU = _UxGT("創設網格"); // "Build Mesh" PROGMEM Language_Str MSG_UBL_BUILD_MESH_M1 = _UxGT("創設 ") PREHEAT_1_LABEL _UxGT(" 網格"); // "Build PREHEAT_1_LABEL Mesh" PROGMEM Language_Str MSG_UBL_BUILD_MESH_M2 = _UxGT("創設 ") PREHEAT_2_LABEL _UxGT(" 網格"); // "Build PREHEAT_2_LABEL Mesh" PROGMEM Language_Str MSG_UBL_BUILD_COLD_MESH = _UxGT("創設冷網格"); // "Build Cold Mesh" PROGMEM Language_Str MSG_UBL_MESH_HEIGHT_ADJUST = _UxGT("調整網格高度"); // "Adjust Mesh Height" PROGMEM Language_Str MSG_UBL_MESH_HEIGHT_AMOUNT = _UxGT("高度合計"); // "Height Amount" PROGMEM Language_Str MSG_UBL_VALIDATE_MESH_MENU = _UxGT("批准網格"); // "Validate Mesh" PROGMEM Language_Str MSG_UBL_VALIDATE_MESH_M1 = _UxGT("批准 ") PREHEAT_1_LABEL _UxGT(" 網格"); // "Validate PREHEAT_1_LABEL Mesh" PROGMEM Language_Str MSG_UBL_VALIDATE_MESH_M2 = _UxGT("批准 ") PREHEAT_2_LABEL _UxGT(" 網格"); // "Validate PREHEAT_2_LABEL Mesh" PROGMEM Language_Str MSG_UBL_VALIDATE_CUSTOM_MESH = _UxGT("批准客戶網格"); // "Validate Custom Mesh" PROGMEM Language_Str MSG_UBL_CONTINUE_MESH = _UxGT("繼續熱床網格"); // "Continue Bed Mesh" PROGMEM Language_Str MSG_UBL_MESH_LEVELING = _UxGT("網格調平"); // "Mesh Leveling" PROGMEM Language_Str MSG_UBL_3POINT_MESH_LEVELING = _UxGT("三點調平"); // "3-Point Leveling" PROGMEM Language_Str MSG_UBL_GRID_MESH_LEVELING = _UxGT("格子網格調平"); // "Grid Mesh Leveling" PROGMEM Language_Str MSG_UBL_MESH_LEVEL = _UxGT("調平網格"); // "Level Mesh" PROGMEM Language_Str MSG_UBL_SIDE_POINTS = _UxGT("邊點"); // "Side Points" PROGMEM Language_Str MSG_UBL_MAP_TYPE = _UxGT("圖類型"); // "Map Type" PROGMEM Language_Str MSG_UBL_OUTPUT_MAP = _UxGT("輸出網格圖"); // "Output Mesh Map" PROGMEM Language_Str MSG_UBL_OUTPUT_MAP_HOST = _UxGT("輸出到主機"); // "Output for Host" PROGMEM Language_Str MSG_UBL_OUTPUT_MAP_CSV = _UxGT("輸出到CSV"); // "Output for CSV" PROGMEM Language_Str MSG_UBL_OUTPUT_MAP_BACKUP = _UxGT("輸出到備份"); // "Off Printer Backup" PROGMEM Language_Str MSG_UBL_INFO_UBL = _UxGT("輸出UBL信息"); // "Output UBL Info" PROGMEM Language_Str MSG_UBL_FILLIN_AMOUNT = _UxGT("填充合計"); // "Fill-in Amount" PROGMEM Language_Str MSG_UBL_MANUAL_FILLIN = _UxGT("手工填充"); // "Manual Fill-in" PROGMEM Language_Str MSG_UBL_SMART_FILLIN = _UxGT("聰明填充"); // "Smart Fill-in" PROGMEM Language_Str MSG_UBL_FILLIN_MESH = _UxGT("填充網格"); // "Fill-in Mesh" PROGMEM Language_Str MSG_UBL_INVALIDATE_ALL = _UxGT("作廢所有的"); // "Invalidate All" PROGMEM Language_Str MSG_UBL_INVALIDATE_CLOSEST = _UxGT("作廢最近的"); // "Invalidate Closest" PROGMEM Language_Str MSG_UBL_FINE_TUNE_ALL = _UxGT("細調所有的"); // "Fine Tune All" PROGMEM Language_Str MSG_UBL_FINE_TUNE_CLOSEST = _UxGT("細調最近的"); // "Fine Tune Closest" PROGMEM Language_Str MSG_UBL_STORAGE_MESH_MENU = _UxGT("網格存儲"); // "Mesh Storage" PROGMEM Language_Str MSG_UBL_STORAGE_SLOT = _UxGT("存儲槽"); // "Memory Slot" PROGMEM Language_Str MSG_UBL_LOAD_MESH = _UxGT("裝載熱床網格"); // "Load Bed Mesh" PROGMEM Language_Str MSG_UBL_SAVE_MESH = _UxGT("保存熱床網格"); // "Save Bed Mesh" PROGMEM Language_Str MSG_MESH_LOADED = _UxGT("M117 網格 %i 已裝載"); // "Mesh %i loaded" PROGMEM Language_Str MSG_MESH_SAVED = _UxGT("M117 網格 %i 已保存"); // "Mesh %i saved" PROGMEM Language_Str MSG_UBL_NO_STORAGE = _UxGT("沒有存儲"); // "No storage" PROGMEM Language_Str MSG_UBL_SAVE_ERROR = _UxGT("錯誤: UBL保存"); // "Err: UBL Save" PROGMEM Language_Str MSG_UBL_RESTORE_ERROR = _UxGT("錯誤: UBL還原"); // "Err: UBL Restore" PROGMEM Language_Str MSG_UBL_Z_OFFSET_STOPPED = _UxGT("Z偏移已停止"); // "Z-Offset Stopped" PROGMEM Language_Str MSG_UBL_STEP_BY_STEP_MENU = _UxGT("一步步UBL"); // "Step-By-Step UBL" PROGMEM Language_Str MSG_UBL_1_BUILD_COLD_MESH = _UxGT("1. 創設冷網格"); PROGMEM Language_Str MSG_UBL_2_SMART_FILLIN = _UxGT("2. 聰明填充"); PROGMEM Language_Str MSG_UBL_3_VALIDATE_MESH_MENU = _UxGT("3. 批准網格"); PROGMEM Language_Str MSG_UBL_4_FINE_TUNE_ALL = _UxGT("4. 細調所有的"); PROGMEM Language_Str MSG_UBL_5_VALIDATE_MESH_MENU = _UxGT("5. 批准網格"); PROGMEM Language_Str MSG_UBL_6_FINE_TUNE_ALL = _UxGT("6. 細調所有的"); PROGMEM Language_Str MSG_UBL_7_SAVE_MESH = _UxGT("7. 保存熱床網格"); PROGMEM Language_Str MSG_LED_CONTROL = _UxGT("燈管控制"); // "LED Control") PROGMEM Language_Str MSG_LEDS = _UxGT("燈"); // "Lights") PROGMEM Language_Str MSG_LED_PRESETS = _UxGT("燈預置"); // "Light Presets") PROGMEM Language_Str MSG_SET_LEDS_RED = _UxGT("红"); // "Red") PROGMEM Language_Str MSG_SET_LEDS_ORANGE = _UxGT("橙"); // "Orange") PROGMEM Language_Str MSG_SET_LEDS_YELLOW = _UxGT("黃"); // "Yellow") PROGMEM Language_Str MSG_SET_LEDS_GREEN = _UxGT("綠"); // "Green") PROGMEM Language_Str MSG_SET_LEDS_BLUE = _UxGT("藍"); // "Blue") PROGMEM Language_Str MSG_SET_LEDS_INDIGO = _UxGT("青"); // "Indigo") PROGMEM Language_Str MSG_SET_LEDS_VIOLET = _UxGT("紫"); // "Violet") PROGMEM Language_Str MSG_SET_LEDS_WHITE = _UxGT("白"); // "White") PROGMEM Language_Str MSG_SET_LEDS_DEFAULT = _UxGT("缺省"); // "Default") PROGMEM Language_Str MSG_CUSTOM_LEDS = _UxGT("定制燈"); // "Custom Lights") PROGMEM Language_Str MSG_INTENSITY_R = _UxGT("紅飽和度"); // "Red Intensity") PROGMEM Language_Str MSG_INTENSITY_G = _UxGT("綠飽和度"); // "Green Intensity") PROGMEM Language_Str MSG_INTENSITY_B = _UxGT("藍飽和度"); // "Blue Intensity") PROGMEM Language_Str MSG_INTENSITY_W = _UxGT("白飽和度"); // "White Intensity") PROGMEM Language_Str MSG_LED_BRIGHTNESS = _UxGT("亮度"); // "Brightness") PROGMEM Language_Str MSG_MOVING = _UxGT("移動 ..."); // "Moving...") PROGMEM Language_Str MSG_FREE_XY = _UxGT("釋放 XY"); // "Free XY") PROGMEM Language_Str MSG_MOVE_X = _UxGT("移動X"); //"Move X" PROGMEM Language_Str MSG_MOVE_Y = _UxGT("移動Y"); //"Move Y" PROGMEM Language_Str MSG_MOVE_Z = _UxGT("移動Z"); //"Move Z" PROGMEM Language_Str MSG_MOVE_E = _UxGT("擠出機"); //"Extruder" PROGMEM Language_Str MSG_MOVE_EN = _UxGT("擠出機 *"); PROGMEM Language_Str MSG_MOVE_Z_DIST = _UxGT("移動 %s mm"); //"Move 0.025mm" PROGMEM Language_Str MSG_MOVE_01MM = _UxGT("移動 0.1 mm"); //"Move 0.1mm" PROGMEM Language_Str MSG_MOVE_1MM = _UxGT("移動 1 mm"); //"Move 1mm" PROGMEM Language_Str MSG_MOVE_10MM = _UxGT("移動 10 mm"); //"Move 10mm" PROGMEM Language_Str MSG_SPEED = _UxGT("速率"); //"Speed" PROGMEM Language_Str MSG_BED_Z = _UxGT("熱床Z"); //"Bed Z" PROGMEM Language_Str MSG_NOZZLE = " " LCD_STR_THERMOMETER _UxGT(" 噴嘴"); //"Nozzle" 噴嘴 PROGMEM Language_Str MSG_NOZZLE_N = " " LCD_STR_THERMOMETER _UxGT(" 噴嘴 ~"); PROGMEM Language_Str MSG_BED = " " LCD_STR_THERMOMETER _UxGT(" 熱床"); //"Bed" PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("風扇速率"); //"Fan speed" PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("風扇速率 ~"); PROGMEM Language_Str MSG_EXTRA_FAN_SPEED = _UxGT("額外風扇速率"); // "Extra fan speed" PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N = _UxGT("額外風扇速率 ~"); PROGMEM Language_Str MSG_FLOW = _UxGT("擠出速率"); PROGMEM Language_Str MSG_FLOW_N = _UxGT("擠出速率 ~"); //"Flow" PROGMEM Language_Str MSG_CONTROL = _UxGT("控制"); //"Control" PROGMEM Language_Str MSG_MIN = " " LCD_STR_THERMOMETER _UxGT(" 最小"); //" " LCD_STR_THERMOMETER " Min" PROGMEM Language_Str MSG_MAX = " " LCD_STR_THERMOMETER _UxGT(" 最大"); //" " LCD_STR_THERMOMETER " Max" PROGMEM Language_Str MSG_FACTOR = " " LCD_STR_THERMOMETER _UxGT(" 系數"); //" " LCD_STR_THERMOMETER " Fact" PROGMEM Language_Str MSG_AUTOTEMP = _UxGT("自動控溫"); //"Autotemp" PROGMEM Language_Str MSG_LCD_ON = _UxGT("開"); //"On" PROGMEM Language_Str MSG_LCD_OFF = _UxGT("關"); //"Off" PROGMEM Language_Str MSG_SELECT = _UxGT("選擇"); //"Select" PROGMEM Language_Str MSG_SELECT_E = _UxGT("選擇 *"); PROGMEM Language_Str MSG_ACC = _UxGT("加速度"); //"Accel" acceleration PROGMEM Language_Str MSG_JERK = _UxGT("抖動速率"); //"Jerk" PROGMEM Language_Str MSG_VA_JERK = _UxGT("軸抖動速率") LCD_STR_A; //"Va-jerk" PROGMEM Language_Str MSG_VB_JERK = _UxGT("軸抖動速率") LCD_STR_B; //"Vb-jerk" PROGMEM Language_Str MSG_VC_JERK = _UxGT("軸抖動速率") LCD_STR_C; //"Vc-jerk" PROGMEM Language_Str MSG_VE_JERK = _UxGT("擠出機抖動速率"); //"Ve-jerk" PROGMEM Language_Str MSG_VELOCITY = _UxGT("速度"); // "Velocity" PROGMEM Language_Str MSG_VMAX_A = _UxGT("最大進料速率") LCD_STR_A; //"Vmax " max_feedrate_mm_s PROGMEM Language_Str MSG_VMAX_B = _UxGT("最大進料速率") LCD_STR_B; PROGMEM Language_Str MSG_VMAX_C = _UxGT("最大進料速率") LCD_STR_C; PROGMEM Language_Str MSG_VMAX_E = _UxGT("最大進料速率") LCD_STR_E; PROGMEM Language_Str MSG_VMAX_EN = _UxGT("最大進料速率 *"); //"Vmax " max_feedrate_mm_s PROGMEM Language_Str MSG_VMIN = _UxGT("最小進料速率"); //"Vmin" min_feedrate_mm_s PROGMEM Language_Str MSG_VTRAV_MIN = _UxGT("最小移動速率"); //"VTrav min" min_travel_feedrate_mm_s, (target) speed of the move PROGMEM Language_Str MSG_ACCELERATION = _UxGT("加速度"); // "Acceleration" PROGMEM Language_Str MSG_AMAX_A = _UxGT("最大列印加速度") LCD_STR_A; //"Amax " max_acceleration_mm_per_s2, acceleration in units/s^2 for print moves PROGMEM Language_Str MSG_AMAX_B = _UxGT("最大列印加速度") LCD_STR_B; PROGMEM Language_Str MSG_AMAX_C = _UxGT("最大列印加速度") LCD_STR_C; PROGMEM Language_Str MSG_AMAX_E = _UxGT("最大列印加速度") LCD_STR_E; PROGMEM Language_Str MSG_AMAX_EN = _UxGT("最大列印加速度 *"); //"Amax " max_acceleration_mm_per_s2, acceleration in units/s^2 for print moves PROGMEM Language_Str MSG_A_RETRACT = _UxGT("回縮加速度"); //"A-retract" retract_acceleration, E acceleration in mm/s^2 for retracts PROGMEM Language_Str MSG_A_TRAVEL = _UxGT("非列印移動加速度"); //"A-travel" travel_acceleration, X, Y, Z acceleration in mm/s^2 for travel (non printing) moves PROGMEM Language_Str MSG_STEPS_PER_MM = _UxGT("軸步數/mm"); //"Steps/mm" axis_steps_per_mm, axis steps-per-unit G92 PROGMEM Language_Str MSG_A_STEPS = LCD_STR_A _UxGT("軸步數/mm"); //"Asteps/mm" axis_steps_per_mm, axis steps-per-unit G92 PROGMEM Language_Str MSG_B_STEPS = LCD_STR_B _UxGT("軸步數/mm"); PROGMEM Language_Str MSG_C_STEPS = LCD_STR_C _UxGT("軸步數/mm"); PROGMEM Language_Str MSG_E_STEPS = _UxGT("擠出機步數/mm"); //"Esteps/mm" PROGMEM Language_Str MSG_EN_STEPS = _UxGT("擠出機~步數/mm"); PROGMEM Language_Str MSG_TEMPERATURE = _UxGT("溫度"); //"Temperature" PROGMEM Language_Str MSG_MOTION = _UxGT("運作"); //"Motion" PROGMEM Language_Str MSG_FILAMENT = _UxGT("絲料測容"); //"Filament" menu_control_volumetric PROGMEM Language_Str MSG_VOLUMETRIC_ENABLED = _UxGT("測容積mm³"); //"E in mm3" volumetric_enabled PROGMEM Language_Str MSG_FILAMENT_DIAM = _UxGT("絲料直徑"); //"Fil. Dia." PROGMEM Language_Str MSG_FILAMENT_DIAM_E = _UxGT("絲料直徑 *"); PROGMEM Language_Str MSG_FILAMENT_UNLOAD = _UxGT("卸載 mm"); // "Unload mm" PROGMEM Language_Str MSG_FILAMENT_LOAD = _UxGT("装載 mm"); // "Load mm" PROGMEM Language_Str MSG_CONTRAST = _UxGT("LCD對比度"); //"LCD contrast" PROGMEM Language_Str MSG_STORE_EEPROM = _UxGT("保存設置"); //"Store memory" PROGMEM Language_Str MSG_LOAD_EEPROM = _UxGT("載入設置"); //"Load memory" PROGMEM Language_Str MSG_RESTORE_DEFAULTS = _UxGT("恢復安全值"); //"Restore Defaults" PROGMEM Language_Str MSG_INIT_EEPROM = _UxGT("初始化設置"); // "Initialize EEPROM" PROGMEM Language_Str MSG_REFRESH = LCD_STR_REFRESH _UxGT("刷新"); //"Refresh" PROGMEM Language_Str MSG_INFO_SCREEN = _UxGT("資訊界面"); //"Info screen" PROGMEM Language_Str MSG_PREPARE = _UxGT("準備"); //"Prepare" PROGMEM Language_Str MSG_TUNE = _UxGT("調整"); //"Tune" PROGMEM Language_Str MSG_PAUSE_PRINT = _UxGT("暫停列印"); //"Pause print" PROGMEM Language_Str MSG_RESUME_PRINT = _UxGT("恢復列印"); //"Resume print" PROGMEM Language_Str MSG_STOP_PRINT = _UxGT("停止列印"); //"Stop print" PROGMEM Language_Str MSG_MEDIA_MENU = _UxGT("從記憶卡上列印"); //"Print from SD" PROGMEM Language_Str MSG_NO_MEDIA = _UxGT("無記憶卡"); //"No SD card" PROGMEM Language_Str MSG_DWELL = _UxGT("休眠 ..."); //"Sleep..." PROGMEM Language_Str MSG_USERWAIT = _UxGT("點擊繼續 ..."); //"Click to resume..." PROGMEM Language_Str MSG_PRINT_PAUSED = _UxGT("列印已暫停"); // "Print paused" PROGMEM Language_Str MSG_PRINT_ABORTED = _UxGT("已取消列印"); //"Print aborted" PROGMEM Language_Str MSG_NO_MOVE = _UxGT("無移動"); //"No move." PROGMEM Language_Str MSG_KILLED = _UxGT("已砍掉"); //"KILLED. " PROGMEM Language_Str MSG_STOPPED = _UxGT("已停止"); //"STOPPED. " PROGMEM Language_Str MSG_CONTROL_RETRACT = _UxGT("回縮長度mm"); //"Retract mm" retract_length, retract length (positive mm) PROGMEM Language_Str MSG_CONTROL_RETRACT_SWAP = _UxGT("換手回抽長度mm"); //"Swap Re.mm" swap_retract_length, swap retract length (positive mm), for extruder change PROGMEM Language_Str MSG_CONTROL_RETRACTF = _UxGT("回縮速率mm/s"); //"Retract V" retract_feedrate_mm_s, feedrate for retracting (mm/s) PROGMEM Language_Str MSG_CONTROL_RETRACT_ZHOP = _UxGT("Hop mm"); //"Hop mm" retract_zraise, retract Z-lift PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVER = _UxGT("回縮恢復長度mm"); //"UnRet +mm" retract_recover_extra, additional recover length (mm, added to retract length when recovering) PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVER_SWAP = _UxGT("換手回縮恢復長度mm"); //"S UnRet+mm" swap_retract_recover_extra, additional swap recover length (mm, added to retract length when recovering from extruder change) PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVERF = _UxGT("回縮恢復後進料速率mm/s"); //"UnRet V" retract_recover_feedrate_mm_s, feedrate for recovering from retraction (mm/s) PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVER_SWAPF = _UxGT("S UnRet V"); // "S UnRet V" PROGMEM Language_Str MSG_AUTORETRACT = _UxGT("自動回縮"); //"AutoRetr." autoretract_enabled, PROGMEM Language_Str MSG_FILAMENTCHANGE = _UxGT("更換絲料"); //"Change filament" PROGMEM Language_Str MSG_FILAMENTCHANGE_E = _UxGT("更換絲料 *"); PROGMEM Language_Str MSG_FILAMENTLOAD = _UxGT("裝載絲料"); // "Load filament" PROGMEM Language_Str MSG_FILAMENTLOAD_E = _UxGT("裝載絲料 *"); PROGMEM Language_Str MSG_FILAMENTUNLOAD = _UxGT("卸載絲料"); // "Unload filament" PROGMEM Language_Str MSG_FILAMENTUNLOAD_E = _UxGT("卸載絲料 *"); // "Unload filament" PROGMEM Language_Str MSG_FILAMENTUNLOAD_ALL = _UxGT("卸載全部"); // "Unload All" PROGMEM Language_Str MSG_ATTACH_MEDIA = _UxGT("初始化記憶卡"); //"Init. SD card" PROGMEM Language_Str MSG_CHANGE_MEDIA = _UxGT("更換記憶卡"); //"Change SD card" PROGMEM Language_Str MSG_ZPROBE_OUT = _UxGT("Z探針在熱床之外"); //"Z probe out. bed" Z probe is not within the physical limits PROGMEM Language_Str MSG_SKEW_FACTOR = _UxGT("偏斜因數"); // "Skew Factor" PROGMEM Language_Str MSG_BLTOUCH = _UxGT("BLTouch"); // "BLTouch" PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("BLTouch 自檢"); // "BLTouch Self-Test" PROGMEM Language_Str MSG_BLTOUCH_RESET = _UxGT("重置BLTouch"); // "Reset BLTouch" PROGMEM Language_Str MSG_BLTOUCH_DEPLOY = _UxGT("部署BLTouch"); // "Deploy BLTouch" PROGMEM Language_Str MSG_BLTOUCH_STOW = _UxGT("裝載BLTouch"); // "Stow BLTouch" PROGMEM Language_Str MSG_HOME_FIRST = _UxGT("歸位 %s%s%s 先"); //"Home ... first" PROGMEM Language_Str MSG_ZPROBE_ZOFFSET = _UxGT("Z偏移"); //"Z Offset" PROGMEM Language_Str MSG_BABYSTEP_X = _UxGT("微量調整X軸"); //"Babystep X" lcd_babystep_x, Babystepping enables the user to control the axis in tiny amounts PROGMEM Language_Str MSG_BABYSTEP_Y = _UxGT("微量調整Y軸"); //"Babystep Y" PROGMEM Language_Str MSG_BABYSTEP_Z = _UxGT("微量調整Z軸"); //"Babystep Z" PROGMEM Language_Str MSG_ENDSTOP_ABORT = _UxGT("擋塊終止"); //"Endstop abort" PROGMEM Language_Str MSG_HEATING_FAILED_LCD = _UxGT("加熱失敗"); //"Heating failed" PROGMEM Language_Str MSG_ERR_REDUNDANT_TEMP = _UxGT("錯誤：REDUNDANT TEMP"); //"Err: REDUNDANT TEMP" PROGMEM Language_Str MSG_THERMAL_RUNAWAY = _UxGT("溫控失控"); //"THERMAL RUNAWAY" PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("錯誤：最高溫度"); //"Err: MAXTEMP" PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("錯誤：最低溫度"); //"Err: MINTEMP" PROGMEM Language_Str MSG_ERR_MAXTEMP_BED = _UxGT("錯誤：最高熱床溫度"); //"Err: MAXTEMP BED" PROGMEM Language_Str MSG_ERR_MINTEMP_BED = _UxGT("錯誤：最低熱床溫度"); //"Err: MINTEMP BED" PROGMEM Language_Str MSG_ERR_Z_HOMING = _UxGT("歸位 XY 先"); //"Home XY First" PROGMEM Language_Str MSG_HALTED = _UxGT("印表機停機"); //"PRINTER HALTED" PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("請重置"); //"Please reset" PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("天"); //"d" // One character only PROGMEM Language_Str MSG_SHORT_HOUR = _UxGT("時"); //"h" // One character only PROGMEM Language_Str MSG_SHORT_MINUTE = _UxGT("分"); //"m" // One character only PROGMEM Language_Str MSG_HEATING = _UxGT("加熱中 ..."); //"Heating..." PROGMEM Language_Str MSG_BED_HEATING = _UxGT("加熱熱床中 ..."); //"Bed Heating..." PROGMEM Language_Str MSG_DELTA_CALIBRATE = _UxGT("⊿校準"); //"Delta Calibration" PROGMEM Language_Str MSG_DELTA_CALIBRATE_X = _UxGT("⊿校準X"); //"Calibrate X" PROGMEM Language_Str MSG_DELTA_CALIBRATE_Y = _UxGT("⊿校準Y"); //"Calibrate Y" PROGMEM Language_Str MSG_DELTA_CALIBRATE_Z = _UxGT("⊿校準Z"); //"Calibrate Z" PROGMEM Language_Str MSG_DELTA_CALIBRATE_CENTER = _UxGT("⊿校準中心"); //"Calibrate Center" PROGMEM Language_Str MSG_DELTA_SETTINGS = _UxGT("⊿設置"); // "Delta Settings" PROGMEM Language_Str MSG_DELTA_AUTO_CALIBRATE = _UxGT("⊿自動校準"); // "Auto Calibration" PROGMEM Language_Str MSG_DELTA_HEIGHT_CALIBRATE = _UxGT("設置⊿高度"); // "Set Delta Height" PROGMEM Language_Str MSG_DELTA_DIAG_ROD = _UxGT("⊿斜柱"); // "Diag Rod" PROGMEM Language_Str MSG_DELTA_HEIGHT = _UxGT("⊿高度"); // "Height" PROGMEM Language_Str MSG_DELTA_RADIUS = _UxGT("⊿半徑"); // "Radius" PROGMEM Language_Str MSG_INFO_MENU = _UxGT("關於印表機"); //"About Printer" PROGMEM Language_Str MSG_INFO_PRINTER_MENU = _UxGT("印表機訊息"); //"Printer Info" PROGMEM Language_Str MSG_3POINT_LEVELING = _UxGT("三點調平"); // "3-Point Leveling" PROGMEM Language_Str MSG_LINEAR_LEVELING = _UxGT("線性調平"); // "Linear Leveling" PROGMEM Language_Str MSG_BILINEAR_LEVELING = _UxGT("雙線性調平"); // "Bilinear Leveling" PROGMEM Language_Str MSG_UBL_LEVELING = _UxGT("統一熱床調平(UBL)"); // "Unified Bed Leveling" PROGMEM Language_Str MSG_MESH_LEVELING = _UxGT("網格調平"); // "Mesh Leveling" PROGMEM Language_Str MSG_INFO_STATS_MENU = _UxGT("印表機統計"); //"Printer Stats" PROGMEM Language_Str MSG_INFO_BOARD_MENU = _UxGT("主板訊息"); //"Board Info" PROGMEM Language_Str MSG_INFO_THERMISTOR_MENU = _UxGT("溫度計"); //"Thermistors" PROGMEM Language_Str MSG_INFO_EXTRUDERS = _UxGT("擠出機"); //"Extruders" PROGMEM Language_Str MSG_INFO_BAUDRATE = _UxGT("傳輸率"); //"Baud" PROGMEM Language_Str MSG_INFO_PROTOCOL = _UxGT("協議"); //"Protocol" PROGMEM Language_Str MSG_CASE_LIGHT = _UxGT("外殼燈"); // "Case light" PROGMEM Language_Str MSG_CASE_LIGHT_BRIGHTNESS = _UxGT("燈亮度"); // "Light BRIGHTNESS" PROGMEM Language_Str MSG_EXPECTED_PRINTER = _UxGT("打印機不正確"); // "The printer is incorrect" #if LCD_WIDTH >= 20 PROGMEM Language_Str MSG_INFO_PRINT_COUNT = _UxGT("列印計數"); //"Print Count" PROGMEM Language_Str MSG_INFO_COMPLETED_PRINTS = _UxGT("已完成"); //"Completed" PROGMEM Language_Str MSG_INFO_PRINT_TIME = _UxGT("總列印時間"); //"Total print time" PROGMEM Language_Str MSG_INFO_PRINT_LONGEST = _UxGT("最長工作時間"); //"Longest job time" PROGMEM Language_Str MSG_INFO_PRINT_FILAMENT = _UxGT("總計擠出"); //"Extruded total" #else PROGMEM Language_Str MSG_INFO_PRINT_COUNT = _UxGT("列印數"); //"Prints" PROGMEM Language_Str MSG_INFO_COMPLETED_PRINTS = _UxGT("完成"); //"Completed" PROGMEM Language_Str MSG_INFO_PRINT_TIME = _UxGT("總共"); //"Total" PROGMEM Language_Str MSG_INFO_PRINT_LONGEST = _UxGT("最長"); //"Longest" PROGMEM Language_Str MSG_INFO_PRINT_FILAMENT = _UxGT("已擠出"); //"Extruded" #endif PROGMEM Language_Str MSG_INFO_MIN_TEMP = _UxGT("最低溫度"); //"Min Temp" PROGMEM Language_Str MSG_INFO_MAX_TEMP = _UxGT("最高溫度"); //"Max Temp" PROGMEM Language_Str MSG_INFO_PSU = _UxGT("電源供應"); //"Power Supply" PROGMEM Language_Str MSG_DRIVE_STRENGTH = _UxGT("驅動力度"); // "Drive Strength" PROGMEM Language_Str MSG_DAC_PERCENT_X = _UxGT("X 驅動 %"); // "X Driver %" PROGMEM Language_Str MSG_DAC_PERCENT_Y = _UxGT("Y 驅動 %"); // "Y Driver %" PROGMEM Language_Str MSG_DAC_PERCENT_Z = _UxGT("Z 驅動 %"); // "Z Driver %" PROGMEM Language_Str MSG_DAC_PERCENT_E = _UxGT("E 驅動 %"); // "E Driver %" PROGMEM Language_Str MSG_DAC_EEPROM_WRITE = _UxGT("保存驅動設置"); // "DAC EEPROM Write" PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER_PAUSE = _UxGT("列印已暫停"); // "PRINT PAUSED" PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER_LOAD = _UxGT("裝載絲料"); // "LOAD FILAMENT" PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER_UNLOAD = _UxGT("卸載絲料"); // "UNLOAD FILAMENT" PROGMEM Language_Str MSG_FILAMENT_CHANGE_OPTION_HEADER = _UxGT("恢複選項:"); // "RESUME OPTIONS:" PROGMEM Language_Str MSG_FILAMENT_CHANGE_OPTION_PURGE = _UxGT("清除更多"); // "Purge more" PROGMEM Language_Str MSG_FILAMENT_CHANGE_OPTION_RESUME = _UxGT("恢復列印"); //"Resume print" PROGMEM Language_Str MSG_FILAMENT_CHANGE_NOZZLE = _UxGT(" 噴嘴: "); // " Nozzle: " PROGMEM Language_Str MSG_LCD_HOMING_FAILED = _UxGT("歸原位失敗"); // "Homing failed" PROGMEM Language_Str MSG_LCD_PROBING_FAILED = _UxGT("探針探測失敗"); // "Probing failed" PROGMEM Language_Str MSG_M600_TOO_COLD = _UxGT("M600: 太冷"); // "M600: Too cold" #if LCD_HEIGHT >= 4 PROGMEM Language_Str MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_3_LINE("等待開始", "絲料", "變更")); //"Wait for start of the filament change" PROGMEM Language_Str MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_2_LINE("等待", "卸下絲料")); //"Wait for filament unload" PROGMEM Language_Str MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_3_LINE("插入絲料", "並按鍵", "繼續 ...")); //"Insert filament and press button to continue..." PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEAT = _UxGT(MSG_2_LINE("按下按鈕來", "加熱噴嘴.")); // "Press button to heat nozzle." PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEATING = _UxGT(MSG_2_LINE("加熱噴嘴", "請等待 ...")); // "Heating nozzle Please wait..." PROGMEM Language_Str MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_2_LINE("等待", "進料")); //"Wait for filament load" PROGMEM Language_Str MSG_FILAMENT_CHANGE_PURGE = _UxGT(MSG_2_LINE("等待", "絲料清除")); // "Wait for filament purge" PROGMEM Language_Str MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_2_LINE("等待列印", "恢復")); //"Wait for print to resume" #else // LCD_HEIGHT < 4 PROGMEM Language_Str MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_1_LINE("請等待 ...")); //"Please wait..." PROGMEM Language_Str MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_1_LINE("退出中 ...")); //"Ejecting..." PROGMEM Language_Str MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_1_LINE("插入並點擊")); //"Insert and Click" PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEATING = _UxGT(MSG_1_LINE("加熱中 ...")); // "Heating..." PROGMEM Language_Str MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_1_LINE("載入中 ...")); //"Loading..." PROGMEM Language_Str MSG_FILAMENT_CHANGE_PURGE = _UxGT(MSG_1_LINE("清除中 ...")); // "Purging..." PROGMEM Language_Str MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_1_LINE("恢復中 ...")); //"Resuming..." #endif // LCD_HEIGHT < 4 }