#include "mks_wifi_sd.h"

#include "../../MarlinCore.h"
#include "../../lcd/marlinui.h"
#include "../../libs/fatfs/ff.h"
#include "../../libs/buzzer.h"  
#include "../temperature.h"
#include "../../libs/fatfs/fatfs_shared.h"
#include "uart.h"

#ifdef MKS_WIFI

#if ENABLED(TFT_480x320) || ENABLED(TFT_480x320_SPI)
#include "mks_wifi_ui.h"
#endif

volatile uint8_t *file_buff=shared_mem;
volatile uint8_t *file_buff_pos;
volatile uint16_t file_data_size;

volatile uint8_t *dma_buff[] = {file_buff+FILE_BUFFER_SIZE,file_buff+FILE_BUFFER_SIZE+ESP_PACKET_SIZE};
volatile uint8_t dma_buff_index=0;
volatile uint8_t *buff;

volatile uint8_t buffer_ready;
volatile uint8_t dma_stopped;

FIL upload_file;

void mks_wifi_sd_ls(void){
    res = f_opendir((DIR*)&dir, "0:");                       /* Open the directory */
    if (res == FR_OK) {
        for (;;) {
            res = f_readdir((DIR*)&dir,(FILINFO*) &fno);                   /* Read a directory item */
            if (res != FR_OK || fno.fname[0] == 0) break;  /* Break on error or end of dir */
                DEBUG("%s\n", fno.fname);
            }
       }else{
          ERROR("Opendir error %d",res);
      }
   f_closedir((DIR*)&dir);
}

uint8_t mks_wifi_sd_init(void){
   card.release();
   DEBUG("Card release");
   res = f_mount((FATFS *)&FATFS_Obj, "0", 1);
   DEBUG("SD init result:%d",res);
   return (uint8_t)res;
}

void mks_wifi_sd_deinit(void){
   DEBUG("Unmount SD");
   f_mount(0, "", 1);
   DEBUG("Marlin mount");
   card.mount();
};

void sd_delete_file(char *filename){
   mks_wifi_sd_init();
   DEBUG("Remove %s",filename);
   f_unlink(filename);
   mks_wifi_sd_deinit();
}

/*
Ищет файл filename и возвращает 8.3 имя в dosfilename
Возвращаемое значение 1 если нашлось, 0 если нет
*/

uint8_t get_dos_filename(char *filename, char* dosfilename){
    uint8_t ret_val=0;
   
   mks_wifi_sd_init();

    res = f_opendir((DIR*)&dir, "0:");                       /* Open the directory */
    
    if (res == FR_OK) {
        for (;;) {
            res = f_readdir((DIR*)&dir, (FILINFO*)&fno);                   /* Read a directory item */
            if (res != FR_OK || fno.fname[0] == 0) break;  /* Break on error or end of dir */
            
            if(!strcmp((char *)fno.fname,filename)){
               DEBUG("Found %s %s\n", fno.fname, fno.altname);
               strncpy(dosfilename,(char *)fno.altname,13);
               ret_val = 1;
            }
                
            }
       }else{
          ERROR("Opendir error %d",res);
      }
   f_closedir((DIR*)&dir);

   mks_wifi_sd_deinit();

   return ret_val;
}



void mks_wifi_start_file_upload(ESP_PROTOC_FRAME *packet){
	char str[100];
   UINT bytes_writen=0;
	uint32_t file_size, file_inc_size, file_size_writen;

   uint16_t in_sector;
   uint16_t last_sector;

   volatile uint32_t dma_timeout;
   uint16_t data_size;
   int16_t save_bed,save_e0;

   uint32_t data_to_write=0;
   uint8_t *data_packet;
   char file_name[100];


   save_bed=thermalManager.degTargetBed();
   save_e0=thermalManager.degTargetHotend(0);
   
   DEBUG("Saved target temp E0 %d Bed %d",save_e0,save_bed);
   
   thermalManager.setTargetBed(0);
   thermalManager.setTargetHotend(0,0);
   thermalManager.manage_heater();
 	//Установить имя файла. Смещение на 3 байта, чтобы добавить путь к диску
   file_name[0]='0';
   file_name[1]=':';
   file_name[2]='/';

   memcpy((uint8_t *)file_name+3,(uint8_t *)&packet->data[5],(packet->dataLen - 5));
   file_name[packet->dataLen - 5 + 3] = 0; 

   file_size=(packet->data[4] << 24) | (packet->data[3] << 16) | (packet->data[2] << 8) | packet->data[1];
   DEBUG("Start file %s size %d",file_name,file_size);
   
   //Отмонтировать SD от Marlin, Монтировать FATFs 
   if(mks_wifi_sd_init()){
      ERROR("Error SD mount");
      ui.set_status((const char *)"Error SD mount",true);
      ui.update();
      mks_wifi_sd_deinit();
      return;
   }
   
   DEBUG("Open file");
   //открыть файл для записи
   res=f_open((FIL *)&upload_file,file_name,FA_CREATE_ALWAYS | FA_WRITE);
   if(res){
      ERROR("File open error %d",res);
      ui.set_status((const char *)"File open error",true);
      ui.update();
      mks_wifi_sd_deinit();
      return;
   }

   #if ENABLED(TFT_480x320) || ENABLED(TFT_480x320_SPI)
      #ifdef SHOW_PROGRESS
      mks_update_status(file_name+3,0,file_size);
      #else
      mks_upload_screen();
      #endif
   #endif   

   dma_buff_index=0;
   file_inc_size=0; //Счетчик принятых данных, для записи в файл
   file_size_writen = 0; //Счетчик записанных в файл данных
   file_data_size = 0;
   dma_timeout = DMA_TIMEOUT; //Тайм-аут, на случай если передача зависла.
   last_sector = 0;
   buffer_ready = 0;

   #ifdef STM32F1
   //Отключение тактирования не используемых блоков
   RCC->APB1ENR &= ~(RCC_APB1ENR_TIM5EN|RCC_APB1ENR_TIM4EN);
   RCC->APB1ENR &= ~(RCC_APB1ENR_SPI2EN|RCC_APB1ENR_USART3EN);
   RCC->APB2ENR &= ~RCC_APB2ENR_TIM1EN;
   RCC->AHBENR &= ~(RCC_AHBENR_FSMCEN);

   //Максимальная частота в режиме out
   GPIOC->CRL |= GPIO_CRL_MODE7;
   GPIOC->CRL &= ~GPIO_CRL_CNF7;

   DMA1_Channel5->CCR = DMA_CONF;
   DMA1_Channel5->CPAR = (uint32_t)&USART1->DR;
   DMA1_Channel5->CMAR = (uint32_t)dma_buff[dma_buff_index];
   DMA1_Channel5->CNDTR = ESP_PACKET_SIZE;
   DMA1->IFCR = DMA_IFCR_CGIF5|DMA_IFCR_CTEIF5|DMA_IFCR_CHTIF5|DMA_IFCR_CTCIF5;
   DMA1_Channel5->CCR = DMA_CONF|DMA_CCR_EN;

   NVIC_EnableIRQ(DMA1_Channel5_IRQn);

   USART1->CR1 = USART_CR1_UE;
   USART1->CR1 = USART_CR1_TE | USART_CR1_UE;
   USART1->BRR = 0x25;
   USART1->CR2 = 0;
   USART1->CR3 = USART_CR3_DMAR;
   USART1->SR = 0;
   USART1->CR1 |= USART_CR1_RE;
   #endif

   #ifdef STM32F4

   RCC->APB1ENR &= ~RCC_APB1ENR_TIM5EN;
   RCC->APB2ENR &= ~RCC_APB2ENR_TIM10EN;

   DMA2_Stream5->CR = 0;
   DMA2->HIFCR=DMA_S5_CLEAR;
   
   DMA2_Stream5->PAR = (uint32_t)&USART1->DR;
   DMA2_Stream5->M0AR = (uint32_t)dma_buff[dma_buff_index];
   DMA2_Stream5->NDTR = ESP_PACKET_SIZE;
   
   DMA2_Stream5->CR = DMA_CONF|DMA_SxCR_EN;

   NVIC_EnableIRQ(DMA2_Stream5_IRQn);

   USART1->CR1 = USART_CR1_UE;
   USART1->CR1 = USART_CR1_TE | USART_CR1_UE;
   USART1->BRR = (uint32_t)(84000000+1958400/2)/1958400;
   USART1->CR2 = 0;
   USART1->CR3 = USART_CR3_DMAR;
   USART1->SR = 0;
   USART1->CR1 |= USART_CR1_RE;
   #endif

   delay(200);	
   (void)USART1->DR;
   
   TERN_(USE_WATCHDOG, HAL_watchdog_refresh());
   DEBUG("DMA1 buff: %0X", dma_buff[0]);
   DEBUG("DMA2 buff: %0X", dma_buff[1]);
   DEBUG("File buff: %0X size %d (%0X)", file_buff, FILE_BUFFER_SIZE, FILE_BUFFER_SIZE);

   //На время передачи отключение systick
   SysTick->CTRL &= ~SysTick_CTRL_ENABLE_Msk;

   OUT_WRITE(FAN1_PIN,HIGH);
   OUT_WRITE(HEATER_0_PIN,LOW);
   OUT_WRITE(HEATER_BED_PIN,LOW);

   #if HOTENDS == 2
      OUT_WRITE(HEATER_1_PIN,LOW);
   #endif

   data_packet = 0;

   while(--dma_timeout > 0){

      if(buffer_ready > 0){
         
         if(data_packet != buff){
            data_packet = (uint8_t *)buff;
         }else{
            DEBUG("Change");
            if(dma_buff_index){
               data_packet = (uint8_t *)dma_buff[1];
            }else{
               data_packet = (uint8_t *)dma_buff[0];
            }
         }


         if(*data_packet != ESP_PROTOC_HEAD){
            ERROR("Wrong packet head");
            break;
         }

         in_sector = (*(data_packet+5) << 8) | *(data_packet+4);
         
         if((in_sector - last_sector) > 1){
            ERROR("IN Sec: %d Prev sec: %d",in_sector,last_sector);
            dma_stopped = 2;
            break;
         }else{
            last_sector=in_sector;
         }

         data_size = (*(data_packet+3) << 8) | *(data_packet+2);
         data_size -= 4; //4 байта с номером сегмента и флагами

         memcpy((uint8_t *)file_buff+file_data_size,(uint8_t*)(data_packet+8),data_size);
         file_data_size+=data_size;

         //Если буфер полон и писать некуда, запись в файл
         if((file_data_size + ESP_PACKET_SIZE) > FILE_BUFFER_SIZE){
            data_to_write = file_data_size / 512;
            data_to_write = data_to_write * 512;

            file_inc_size += data_to_write; 
            DEBUG("%d [%d]Save %d bytes (%d of %d) ",buffer_ready,in_sector,data_to_write,file_inc_size,file_size);
            
            res=f_write((FIL *)&upload_file,(uint8_t*)file_buff,data_to_write,&bytes_writen);
            if(res){
               ERROR("Write err %d",res);
               break;
            }

            file_size_writen+=bytes_writen;
            file_data_size -= data_to_write;
            
            memcpy((uint8_t *)file_buff,(uint8_t *)(file_buff+data_to_write),file_data_size);
         }

         if(in_sector == 0){
            if(data_size == file_size){
               DEBUG("1-packet file");
               *(data_packet+7) = 0x80;
            }
         }

         if(*(data_packet+7) == 0x80){ //Последний пакет с данными
            WRITE(MKS_WIFI_IO4, HIGH); //Остановить передачу от ESP
            DEBUG("Last packet");

            if(file_data_size != 0 ){
               file_inc_size += file_data_size; 

               DEBUG("Save last %d bytes from buffer (%d of %d) ",file_data_size,file_inc_size,file_size);
               res=f_write((FIL *)&upload_file,(uint8_t*)file_buff,file_data_size,&bytes_writen);
               if(res){
                  ERROR("Write err %d",res);
                  break;
               }
               file_size_writen+=bytes_writen;
            }

            break;
         }

         if(buffer_ready > 0){
            --buffer_ready;
         };

         if((buffer_ready == 0) && (dma_stopped == 1)){
               DEBUG("Start");
               (void)USART1->SR;
               GPIOC->BSRR = GPIO_BSRR_BR7;
               dma_stopped=0;
         }

         if(dma_stopped == 2){
            break;
         }

         dma_timeout = DMA_TIMEOUT;
      }else{
         TERN_(USE_WATCHDOG, HAL_watchdog_refresh());
      }
   }
   
   #ifdef STM32F1
   //Включение обратно переферии
   SysTick->CTRL |= SysTick_CTRL_ENABLE_Msk;
   RCC->APB1ENR |= (RCC_APB1ENR_TIM5EN|RCC_APB1ENR_TIM4EN);
   RCC->APB1ENR |= (RCC_APB1ENR_SPI2EN|RCC_APB1ENR_USART3EN);
   RCC->APB2ENR |= RCC_APB2ENR_TIM1EN;
   RCC->AHBENR |= (RCC_AHBENR_FSMCEN);
   #endif

   #ifdef STM32F4
   RCC->APB1ENR |= RCC_APB1ENR_TIM5EN;
   RCC->APB2ENR |= RCC_APB2ENR_TIM10EN;

   SysTick->CTRL |= SysTick_CTRL_ENABLE_Msk;
   #endif
   
   if((dma_timeout == 0) || (dma_stopped == 2)) {
      #ifdef STM32F1
      DEBUG("DMA timeout, NDTR: %d",DMA1_Channel5->CNDTR);
      #endif
      #ifdef STM32F4
      DEBUG("DMA timeout, NDTR: %d",DMA2_Stream5->NDTR);
      #endif

      DEBUG("SR: %0X",USART1->SR);
      //Restart ESP8266
      WRITE(MKS_WIFI_IO_RST, LOW);
      delay(200);	
      WRITE(MKS_WIFI_IO_RST, HIGH);
   }
   
   #ifdef STM32F1
   //Выключить DMA
   DMA1->IFCR = DMA_IFCR_CGIF5|DMA_IFCR_CTEIF5|DMA_IFCR_CHTIF5|DMA_IFCR_CTCIF5;
   DMA1_Channel5->CCR = 0;
   #endif

   #ifdef STM32F4
   //Выключить DMA
   DMA2->HIFCR=DMA_S5_CLEAR;
   DMA2_Stream5->CR = 0;
   #endif

   MYSERIAL2.begin(BAUDRATE_2);
   WRITE(MKS_WIFI_IO4, LOW); //Включить передачу от ESP 

   TERN_(USE_WATCHDOG, HAL_watchdog_refresh());
   
   f_close((FIL *)&upload_file);
   DEBUG("File closed");

   if( (file_size == file_inc_size) && (file_size == file_size_writen) ){
         TERN_(USE_WATCHDOG, HAL_watchdog_refresh());
         mks_wifi_sd_deinit();
         DEBUG("Remount SD");

         #if ENABLED(TFT_480x320) || ENABLED(TFT_480x320_SPI)
         mks_end_transmit();
         #endif
         ui.set_status((const char *)"Upload done",true);
         DEBUG("Upload ok");
         BUZZ(1000,260);

         if(!strcmp(file_name,"0:/Robin_Nano35.bin")){
            TERN_(USE_WATCHDOG, HAL_watchdog_refresh());
            DEBUG("Firmware found, reboot");
            safe_delay(1000);
            NVIC_SystemReset();
         }
   }else{
         TERN_(USE_WATCHDOG, HAL_watchdog_refresh());
         #if ENABLED(TFT_480x320) || ENABLED(TFT_480x320_SPI)
         mks_end_transmit();
         #endif
         ui.set_status((const char *)"Upload failed",true);
         DEBUG("Upload failed! File size: %d; Recieve %d; SD write %d",file_size,file_inc_size,file_size_writen);
         //Установить имя файла.
         str[0]='0';
         str[1]=':';
         str[2]='/';

         memcpy((uint8_t *)str+3,(uint8_t *)&packet->data[5],(packet->dataLen - 5));
         str[packet->dataLen - 5 + 3] = 0; 

         DEBUG("Rename file %s",file_name);
         f_rename(file_name,"file_failed.gcode");

         TERN_(USE_WATCHDOG, HAL_watchdog_refresh());
         mks_wifi_sd_deinit();
         DEBUG("Remount SD");

         BUZZ(436,392);
         BUZZ(109,0);
         BUZZ(436,392);
         BUZZ(109,0);
         BUZZ(436,392);
   }


   TERN_(USE_WATCHDOG, HAL_watchdog_refresh());
   thermalManager.setTargetBed(save_bed);
   thermalManager.setTargetHotend(save_e0,0);
   DEBUG("Restore thermal settings E0:%d Bed:%d",save_bed,save_e0);

}

#ifdef STM32F1
extern "C" void DMA1_Channel5_IRQHandler(void){

      if(DMA1->ISR & DMA_ISR_TEIF5){
         DEBUG("DMA Error");
         dma_stopped = 2;
         DMA1->IFCR = DMA_CLEAR;
         return;
      }
      
      if(buffer_ready > 0){ 
         GPIOC->BSRR = GPIO_BSRR_BS7;  //остановить передачу от esp
         dma_stopped=1;
      };

      DMA1->IFCR = DMA_CLEAR;
      //Указатель на полученный буфер
      buff=dma_buff[dma_buff_index];
      //переключить индекс
      dma_buff_index = (dma_buff_index) ? 0 : 1;

      DMA1_Channel5->CCR = DMA_CONF;
      DMA1_Channel5->CMAR = (uint32_t)dma_buff[dma_buff_index];
      DMA1_Channel5->CNDTR = ESP_PACKET_SIZE;
      DMA1_Channel5->CCR = DMA_CONF|DMA_CCR_EN;
      ++buffer_ready;
}
#endif

#ifdef STM32F4
extern "C" void DMA2_Stream5_IRQHandler(void){

      if(DMA2->HISR & DMA_HISR_TEIF5){
         DEBUG("DMA Error");
         dma_stopped = 2;
         DMA2->HIFCR=DMA_S5_CLEAR;
         return;
      }
      
      if(buffer_ready > 0){ 
         GPIOC->BSRR = GPIO_BSRR_BS7;  //остановить передачу от esp
         dma_stopped=1;
      };

      DMA2->HIFCR=DMA_S5_CLEAR;
      //Указатель на полученный буфер
      buff=dma_buff[dma_buff_index];
      //переключить индекс
      dma_buff_index = (dma_buff_index) ? 0 : 1;


      DMA2_Stream5->CR = DMA_CONF;
      DMA2_Stream5->M0AR = (uint32_t)dma_buff[dma_buff_index];
      DMA2_Stream5->NDTR = ESP_PACKET_SIZE;
      DMA2_Stream5->CR = DMA_CONF|DMA_SxCR_EN;

      ++buffer_ready;
}
#endif

#endif