/**
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */

/**
 * lcd/extui/ftdi_eve_touch_ui/ftdi_eve_extui.cpp
 */

#include "../../../inc/MarlinConfigPre.h"

#if ENABLED(TOUCH_UI_FTDI_EVE)

#include "screens.h"

namespace ExtUI {
  using namespace Theme;
  using namespace FTDI;

  void onStartup() { EventLoop::setup(); }

  void onIdle() { EventLoop::loop(); }

  void onPrinterKilled(PGM_P const error, PGM_P const component) {
    char str[strlen_P(error) + strlen_P(component) + 3];
    sprintf_P(str, PSTR(S_FMT ": " S_FMT), error, component);
    KillScreen::show(str);
  }

  void onMediaInserted() {
    if (AT_SCREEN(StatusScreen))
      StatusScreen::setStatusMessage(GET_TEXT_F(MSG_MEDIA_INSERTED));
    sound.play(media_inserted, PLAY_ASYNCHRONOUS);
  }

  void onMediaRemoved() {
    if (isPrintingFromMedia()) {
      stopPrint();
      InterfaceSoundsScreen::playEventSound(InterfaceSoundsScreen::PRINTING_FAILED);
    }
    else
      sound.play(media_removed, PLAY_ASYNCHRONOUS);

    if (AT_SCREEN(StatusScreen) || isPrintingFromMedia())
      StatusScreen::setStatusMessage(GET_TEXT_F(MSG_MEDIA_REMOVED));

    #if ENABLED(SDSUPPORT)
      if (AT_SCREEN(FilesScreen)) GOTO_SCREEN(StatusScreen);
    #endif
  }

  void onMediaError() {
    sound.play(sad_trombone, PLAY_ASYNCHRONOUS);
    AlertDialogBox::showError(F("Unable to read media."));
  }

  void onStatusChanged(const char *lcd_msg) { StatusScreen::setStatusMessage(lcd_msg); }
  void onStatusChanged(progmem_str lcd_msg) { StatusScreen::setStatusMessage(lcd_msg); }

  void onPrintTimerStarted() {
    InterfaceSoundsScreen::playEventSound(InterfaceSoundsScreen::PRINTING_STARTED);
  }
  void onPrintTimerStopped() {
    InterfaceSoundsScreen::playEventSound(InterfaceSoundsScreen::PRINTING_FINISHED);
  }

  void onPrintTimerPaused() {}
  void onPrintFinished() {}

  void onFilamentRunout(const extruder_t extruder) {
    char lcd_msg[30];
    sprintf_P(lcd_msg, PSTR("Extruder %d Filament Error"), extruder + 1);
    StatusScreen::setStatusMessage(lcd_msg);
    InterfaceSoundsScreen::playEventSound(InterfaceSoundsScreen::PRINTING_FAILED, FTDI::PLAY_SYNCHRONOUS);
  }

  void onHomingStart() {}
  void onHomingComplete() {}

  void onFactoryReset() { InterfaceSettingsScreen::defaultSettings(); }
  void onStoreSettings(char *buff) { InterfaceSettingsScreen::saveSettings(buff); }
  void onLoadSettings(const char *buff) { InterfaceSettingsScreen::loadSettings(buff); }
  void onPostprocessSettings() {} // Called after loading or resetting stored settings

  void onConfigurationStoreWritten(bool success) {
    #ifdef ARCHIM2_SPI_FLASH_EEPROM_BACKUP_SIZE
      if (success && InterfaceSettingsScreen::backupEEPROM()) {
        SERIAL_ECHOLNPGM("EEPROM backed up to SPI Flash");
      }
    #else
      UNUSED(success);
    #endif
  }
  void onConfigurationStoreRead(bool) {}

  void onPlayTone(const uint16_t frequency, const uint16_t duration) { sound.play_tone(frequency, duration); }

  void onUserConfirmRequired(const char * const msg) {
    if (msg)
      ConfirmUserRequestAlertBox::show(msg);
    else
      ConfirmUserRequestAlertBox::hide();
  }

  #if HAS_LEVELING && HAS_MESH
    void onMeshLevelingStart() {}
    void onMeshUpdate(const int8_t x, const int8_t y, const_float_t val) { BedMeshViewScreen::onMeshUpdate(x, y, val); }
    void onMeshUpdate(const int8_t x, const int8_t y, const ExtUI::probe_state_t state) { BedMeshViewScreen::onMeshUpdate(x, y, state); }
  #endif

  #if ENABLED(POWER_LOSS_RECOVERY)
    void onPowerLossResume() {} // Called on resume from power-loss
  #endif

  #if HAS_PID_HEATING
    void onPidTuning(const result_t rst) {
      // Called for temperature PID tuning result
      //SERIAL_ECHOLNPAIR("OnPidTuning:", rst);
      switch (rst) {
        case PID_BAD_EXTRUDER_NUM:
          StatusScreen::setStatusMessage(GET_TEXT_F(MSG_PID_BAD_EXTRUDER_NUM));
          break;
        case PID_TEMP_TOO_HIGH:
          StatusScreen::setStatusMessage(GET_TEXT_F(MSG_PID_TEMP_TOO_HIGH));
          break;
        case PID_TUNING_TIMEOUT:
          StatusScreen::setStatusMessage(GET_TEXT_F(MSG_PID_TIMEOUT));
          break;
        case PID_DONE:
          StatusScreen::setStatusMessage(GET_TEXT_F(MSG_PID_AUTOTUNE_DONE));
          break;
      }
      GOTO_SCREEN(StatusScreen);
    }
  #endif // HAS_PID_HEATING

  void onSteppersDisabled() {}
  void onSteppersEnabled()  {}
}

#endif // TOUCH_UI_FTDI_EVE