/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ /** * Korean * * LCD Menu Messages * See also http://marlinfw.org/docs/development/lcd_language.html * */ #ifndef LANGUAGE_KO_KR_H #define LANGUAGE_KO_KR_H #define CHARSIZE 1 #define WELCOME_MSG MACHINE_NAME _UxGT(" 준비.") #define MSG_BACK _UxGT("뒤로") #define MSG_SD_INSERTED _UxGT("카드 삽입됨") #define MSG_SD_REMOVED _UxGT("카드 제거됨") #define MSG_LCD_ENDSTOPS _UxGT("엔드스탑") #define MSG_LCD_SOFT_ENDSTOPS _UxGT("소프트 엔드스탑") #define MSG_MAIN _UxGT("뒤로") #define MSG_ADVANCED_SETTINGS _UxGT("고급 설정") #define MSG_CONFIGURATION _UxGT("설정") #define MSG_AUTOSTART _UxGT("자동 시작") #define MSG_DISABLE_STEPPERS _UxGT("모터 정지") #define MSG_DEBUG_MENU _UxGT("디버깅 메뉴") #define MSG_PROGRESS_BAR_TEST _UxGT("프로그레스바 테스트") #define MSG_AUTO_HOME _UxGT("오토홈") #define MSG_AUTO_HOME_X _UxGT("X 홈으로") #define MSG_AUTO_HOME_Y _UxGT("Y 홈으로") #define MSG_AUTO_HOME_Z _UxGT("Z 홈으로") #define MSG_TMC_Z_CALIBRATION _UxGT("Z 캘리브레이션") #define MSG_LEVEL_BED_HOMING _UxGT("XYZ 홈으로") #define MSG_LEVEL_BED_WAITING _UxGT("누르면 시작합니다") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("다음 Point") #define MSG_LEVEL_BED_DONE _UxGT("레벨링 완료!") #define MSG_Z_FADE_HEIGHT _UxGT("Fade Height") #define MSG_SET_HOME_OFFSETS _UxGT("Set home offsets") #define MSG_HOME_OFFSETS_APPLIED _UxGT("Offsets applied") #define MSG_SET_ORIGIN _UxGT("Set origin") #define MSG_PREHEAT_1 _UxGT("예열하기 - " PREHEAT_1_LABEL) #define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") #define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" 모두") #define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" 노즐만") #define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" 베드만") #define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" conf") #define MSG_PREHEAT_2 _UxGT("예열하기 - " PREHEAT_2_LABEL) #define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") #define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" 모두") #define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" 노즐만") #define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" 베드만") #define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 _UxGT(" conf") #define MSG_PREHEAT_CUSTOM _UxGT("Custom 예열") #define MSG_COOLDOWN _UxGT("식히기") #define MSG_SWITCH_PS_ON _UxGT("스위치 전원 켜기") #define MSG_SWITCH_PS_OFF _UxGT("스위치 전원 끄기") #define MSG_EXTRUDE _UxGT("밀어내기") #define MSG_RETRACT _UxGT("당기기") #define MSG_MOVE_AXIS _UxGT("축 이동") #define MSG_BED_LEVELING _UxGT("베드 레벨링") #define MSG_LEVEL_BED _UxGT("Level bed") #define MSG_LEVEL_CORNERS _UxGT("Level corners") #define MSG_NEXT_CORNER _UxGT("Next corner") #define MSG_EDITING_STOPPED _UxGT("Mesh Editing Stopped") #define MSG_USER_MENU _UxGT("Custom User Commands") #define MSG_UBL_DOING_G29 _UxGT("오토레벨링 하기") #define MSG_UBL_UNHOMED _UxGT("Home XYZ first") #define MSG_UBL_TOOLS _UxGT("UBL Tools") #define MSG_UBL_LEVEL_BED _UxGT("Unified Bed Leveling") #define MSG_IDEX_MENU _UxGT("IDEX Mode") #define MSG_IDEX_MODE_AUTOPARK _UxGT("Auto-Park") #define MSG_IDEX_MODE_DUPLICATE _UxGT("Duplication") #define MSG_IDEX_MODE_SCALED_COPY _UxGT("Scaled copy") #define MSG_IDEX_MODE_FULL_CTRL _UxGT("Full control") #define MSG_IDEX_X_OFFSET _UxGT("2nd nozzle X") #define MSG_IDEX_Y_OFFSET _UxGT("2nd nozzle Y") #define MSG_IDEX_Z_OFFSET _UxGT("2nd nozzle Z") #define MSG_IDEX_SAVE_OFFSETS _UxGT("Save Offsets") #define MSG_UBL_MANUAL_MESH _UxGT("Manually Build Mesh") #define MSG_UBL_BC_INSERT _UxGT("Place shim & measure") #define MSG_UBL_BC_INSERT2 _UxGT("Measure") #define MSG_UBL_BC_REMOVE _UxGT("Remove & measure bed") #define MSG_UBL_MOVING_TO_NEXT _UxGT("Moving to next") #define MSG_UBL_ACTIVATE_MESH _UxGT("Activate UBL") #define MSG_UBL_DEACTIVATE_MESH _UxGT("Deactivate UBL") #define MSG_UBL_SET_TEMP_BED _UxGT("Bed Temp") #define MSG_UBL_BED_TEMP_CUSTOM MSG_UBL_SET_TEMP_BED #define MSG_UBL_SET_TEMP_HOTEND _UxGT("Hotend Temp") #define MSG_UBL_HOTEND_TEMP_CUSTOM MSG_UBL_SET_TEMP_HOTEND #define MSG_UBL_MESH_EDIT _UxGT("Mesh Edit") #define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Edit Custom Mesh") #define MSG_UBL_FINE_TUNE_MESH _UxGT("Fine Tuning Mesh") #define MSG_UBL_DONE_EDITING_MESH _UxGT("Done Editing Mesh") #define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Build Custom Mesh") #define MSG_UBL_BUILD_MESH_MENU _UxGT("Build Mesh") #define MSG_UBL_BUILD_MESH_M1 _UxGT("Build Mesh (" PREHEAT_1_LABEL ")") #define MSG_UBL_BUILD_MESH_M2 _UxGT("Build Mesh (" PREHEAT_2_LABEL ")") #define MSG_UBL_BUILD_COLD_MESH _UxGT("Build Cold Mesh") #define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Adjust Mesh Height") #define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Height Amount") #define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Validate Mesh") #define MSG_UBL_VALIDATE_MESH_M1 _UxGT("Validate " PREHEAT_1_LABEL " Mesh") #define MSG_UBL_VALIDATE_MESH_M2 _UxGT("Validate Mesh (" PREHEAT_2_LABEL ")") #define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Validate Custom Mesh") #define MSG_UBL_CONTINUE_MESH _UxGT("Continue Bed Mesh") #define MSG_UBL_MESH_LEVELING _UxGT("Mesh Leveling") #define MSG_UBL_3POINT_MESH_LEVELING _UxGT("3-Point Leveling") #define MSG_UBL_GRID_MESH_LEVELING _UxGT("Grid Mesh Leveling") #define MSG_UBL_MESH_LEVEL _UxGT("Level Mesh") #define MSG_UBL_SIDE_POINTS _UxGT("Side Points") #define MSG_UBL_MAP_TYPE _UxGT("Map Type") #define MSG_UBL_OUTPUT_MAP _UxGT("Output Mesh Map") #define MSG_UBL_OUTPUT_MAP_HOST _UxGT("Output for Host") #define MSG_UBL_OUTPUT_MAP_CSV _UxGT("Output for CSV") #define MSG_UBL_OUTPUT_MAP_BACKUP _UxGT("Off Printer Backup") #define MSG_UBL_INFO_UBL _UxGT("Output UBL Info") #define MSG_UBL_EDIT_MESH_MENU _UxGT("Edit Mesh") #define MSG_UBL_FILLIN_AMOUNT _UxGT("Fill-in Amount") #define MSG_UBL_MANUAL_FILLIN _UxGT("Manual Fill-in") #define MSG_UBL_SMART_FILLIN _UxGT("Smart Fill-in") #define MSG_UBL_FILLIN_MESH _UxGT("Fill-in Mesh") #define MSG_UBL_INVALIDATE_ALL _UxGT("Invalidate All") #define MSG_UBL_INVALIDATE_CLOSEST _UxGT("Invalidate Closest") #define MSG_UBL_FINE_TUNE_ALL _UxGT("Fine Tune All") #define MSG_UBL_FINE_TUNE_CLOSEST _UxGT("Fine Tune Closest") #define MSG_UBL_STORAGE_MESH_MENU _UxGT("Mesh Storage") #define MSG_UBL_STORAGE_SLOT _UxGT("Memory Slot") #define MSG_UBL_LOAD_MESH _UxGT("Load Bed Mesh") #define MSG_UBL_SAVE_MESH _UxGT("Save Bed Mesh") #define MSG_MESH_LOADED _UxGT("Mesh %i loaded") #define MSG_MESH_SAVED _UxGT("Mesh %i saved") #define MSG_NO_STORAGE _UxGT("No storage") #define MSG_UBL_SAVE_ERROR _UxGT("Err: UBL Save") #define MSG_UBL_RESTORE_ERROR _UxGT("Err: UBL Restore") #define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Z-Offset Stopped") #define MSG_UBL_STEP_BY_STEP_MENU _UxGT("Step-By-Step UBL") #define MSG_LED_CONTROL _UxGT("LED Control") #define MSG_LEDS _UxGT("Lights") #define MSG_LED_PRESETS _UxGT("Light Presets") #define MSG_SET_LEDS_RED _UxGT("Red") #define MSG_SET_LEDS_ORANGE _UxGT("Orange") #define MSG_SET_LEDS_YELLOW _UxGT("Yellow") #define MSG_SET_LEDS_GREEN _UxGT("Green") #define MSG_SET_LEDS_BLUE _UxGT("Blue") #define MSG_SET_LEDS_INDIGO _UxGT("Indigo") #define MSG_SET_LEDS_VIOLET _UxGT("Violet") #define MSG_SET_LEDS_WHITE _UxGT("White") #define MSG_SET_LEDS_DEFAULT _UxGT("Default") #define MSG_CUSTOM_LEDS _UxGT("Custom Lights") #define MSG_INTENSITY_R _UxGT("Red Intensity") #define MSG_INTENSITY_G _UxGT("Green Intensity") #define MSG_INTENSITY_B _UxGT("Blue Intensity") #define MSG_INTENSITY_W _UxGT("White Intensity") #define MSG_LED_BRIGHTNESS _UxGT("Brightness") #define MSG_MOVING _UxGT("Moving...") #define MSG_FREE_XY _UxGT("Free XY") #define MSG_MOVE_X _UxGT("Move X") #define MSG_MOVE_Y _UxGT("Move Y") #define MSG_MOVE_Z _UxGT("Move Z") #define MSG_MOVE_E _UxGT("Extruder") #define MSG_MOVE_01MM _UxGT("Move 0.1mm") #define MSG_MOVE_1MM _UxGT("Move 1mm") #define MSG_MOVE_10MM _UxGT("Move 10mm") #define MSG_SPEED _UxGT("Speed") #define MSG_BED_Z _UxGT("Bed Z") #define MSG_NOZZLE _UxGT("노즐") #define MSG_BED _UxGT("베드") #define MSG_FAN_SPEED _UxGT("펜 속도") #define MSG_EXTRA_FAN_SPEED _UxGT("엑스트라 펜 속도") #define MSG_FLOW _UxGT("Flow") #define MSG_CONTROL _UxGT("Control") #define MSG_MIN _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Min") #define MSG_MAX _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Max") #define MSG_FACTOR _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Fact") #define MSG_AUTOTEMP _UxGT("Autotemp") #define MSG_ON _UxGT("On ") #define MSG_OFF _UxGT("Off") #define MSG_PID_P _UxGT("PID-P") #define MSG_PID_I _UxGT("PID-I") #define MSG_PID_D _UxGT("PID-D") #define MSG_PID_C _UxGT("PID-C") #define MSG_SELECT _UxGT("Select") #define MSG_ACC _UxGT("Accel") #define MSG_JERK _UxGT("Jerk") #if IS_KINEMATIC #define MSG_VA_JERK _UxGT("Va-jerk") #define MSG_VB_JERK _UxGT("Vb-jerk") #define MSG_VC_JERK _UxGT("Vc-jerk") #else #define MSG_VA_JERK _UxGT("Vx-jerk") #define MSG_VB_JERK _UxGT("Vy-jerk") #define MSG_VC_JERK _UxGT("Vz-jerk") #endif #define MSG_VE_JERK _UxGT("Ve-jerk") #define MSG_JUNCTION_DEVIATION _UxGT("Junction Dev") #define MSG_VELOCITY _UxGT("Velocity") #define MSG_VMAX _UxGT("Vmax ") #define MSG_VMIN _UxGT("Vmin") #define MSG_VTRAV_MIN _UxGT("VTrav min") #define MSG_ACCELERATION _UxGT("Acceleration") #define MSG_AMAX _UxGT("Amax ") #define MSG_A_RETRACT _UxGT("A-retract") #define MSG_A_TRAVEL _UxGT("A-travel") #define MSG_STEPS_PER_MM _UxGT("Steps/mm") #if IS_KINEMATIC #define MSG_ASTEPS _UxGT("Asteps/mm") #define MSG_BSTEPS _UxGT("Bsteps/mm") #define MSG_CSTEPS _UxGT("Csteps/mm") #else #define MSG_ASTEPS _UxGT("Xsteps/mm") #define MSG_BSTEPS _UxGT("Ysteps/mm") #define MSG_CSTEPS _UxGT("Zsteps/mm") #endif #define MSG_ESTEPS _UxGT("Esteps/mm") #define MSG_E1STEPS _UxGT("E1steps/mm") #define MSG_E2STEPS _UxGT("E2steps/mm") #define MSG_E3STEPS _UxGT("E3steps/mm") #define MSG_E4STEPS _UxGT("E4steps/mm") #define MSG_E5STEPS _UxGT("E5steps/mm") #define MSG_E6STEPS _UxGT("E6steps/mm") #define MSG_TEMPERATURE _UxGT("온도") #define MSG_MOTION _UxGT("동작") #define MSG_FILAMENT _UxGT("Filament") #define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3") #define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.") #define MSG_FILAMENT_UNLOAD _UxGT("Unload mm") #define MSG_FILAMENT_LOAD _UxGT("Load mm") #define MSG_ADVANCE_K _UxGT("Advance K") #define MSG_CONTRAST _UxGT("LCD contrast") #define MSG_STORE_EEPROM _UxGT("설정 저장하기") #define MSG_LOAD_EEPROM _UxGT("설정 읽어오기") #define MSG_RESTORE_FAILSAFE _UxGT("설정 되돌리기") #define MSG_INIT_EEPROM _UxGT("EEPROM 초기화") #define MSG_REFRESH _UxGT("새로고침") #define MSG_WATCH _UxGT("처음으로") #define MSG_PREPARE _UxGT("준비하기") #define MSG_TUNE _UxGT("Tune") #define MSG_PAUSE_PRINT _UxGT("일시정지") #define MSG_RESUME_PRINT _UxGT("재시작") #define MSG_STOP_PRINT _UxGT("출력중지") #define MSG_POWER_LOSS_RECOVERY _UxGT("Power-Loss Recovery") #define MSG_CARD_MENU _UxGT("SD 카드출력") #define MSG_NO_CARD _UxGT("SD 카드없음") #define MSG_DWELL _UxGT("슬립모드...") #define MSG_USERWAIT _UxGT("Click to resume...") #define MSG_PRINT_PAUSED _UxGT("일시 정지됨") #define MSG_PRINTING _UxGT("출력중...") #define MSG_PRINT_ABORTED _UxGT("취소됨") #define MSG_NO_MOVE _UxGT("No move.") #define MSG_KILLED _UxGT("죽음. ") #define MSG_STOPPED _UxGT("멈춤. ") #define MSG_CONTROL_RETRACT _UxGT("Retract mm") #define MSG_CONTROL_RETRACT_SWAP _UxGT("Swap Re.mm") #define MSG_CONTROL_RETRACTF _UxGT("Retract V") #define MSG_CONTROL_RETRACT_ZHOP _UxGT("Hop mm") #define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm") #define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("S UnRet mm") #define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V") #define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("S UnRet V") #define MSG_AUTORETRACT _UxGT("AutoRetr.") #define MSG_FILAMENTCHANGE _UxGT("Change filament") #define MSG_FILAMENTLOAD _UxGT("Load filament") #define MSG_FILAMENTUNLOAD _UxGT("Unload filament") #define MSG_FILAMENTUNLOAD_ALL _UxGT("Unload All") #define MSG_INIT_SDCARD _UxGT("Init. SD card") #define MSG_CHANGE_SDCARD _UxGT("Change SD card") #define MSG_ZPROBE_OUT _UxGT("Z Probe past bed") #define MSG_SKEW_FACTOR _UxGT("Skew Factor") #define MSG_BLTOUCH _UxGT("BLTouch") #define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Self-Test") #define MSG_BLTOUCH_RESET _UxGT("Reset BLTouch") #define MSG_BLTOUCH_DEPLOY _UxGT("Deploy BLTouch") #define MSG_BLTOUCH_STOW _UxGT("Stow BLTouch") #define MSG_MANUAL_DEPLOY _UxGT("Deploy Z-Probe") #define MSG_MANUAL_STOW _UxGT("Stow Z-Probe") #define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST #define MSG_FIRST _UxGT("first") #define MSG_ZPROBE_ZOFFSET _UxGT("Probe Z Offset") #define MSG_BABYSTEP_X _UxGT("Babystep X") #define MSG_BABYSTEP_Y _UxGT("Babystep Y") #define MSG_BABYSTEP_Z _UxGT("Babystep Z") #define MSG_ENDSTOP_ABORT _UxGT("Endstop abort") #define MSG_HEATING_FAILED_LCD _UxGT("Heating failed") #define MSG_HEATING_FAILED_LCD_BED _UxGT("Bed heating failed") #define MSG_ERR_REDUNDANT_TEMP _UxGT("Err: REDUNDANT TEMP") #define MSG_THERMAL_RUNAWAY _UxGT("THERMAL RUNAWAY") #define MSG_THERMAL_RUNAWAY_BED _UxGT("BED THERMAL RUNAWAY") #define MSG_ERR_MAXTEMP _UxGT("Err: MAXTEMP") #define MSG_ERR_MINTEMP _UxGT("Err: MINTEMP") #define MSG_ERR_MAXTEMP_BED _UxGT("Err: MAXTEMP BED") #define MSG_ERR_MINTEMP_BED _UxGT("Err: MINTEMP BED") #define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST #define MSG_HALTED _UxGT("PRINTER HALTED") #define MSG_PLEASE_RESET _UxGT("Please reset") #define MSG_SHORT_DAY _UxGT("d") // One character only #define MSG_SHORT_HOUR _UxGT("h") // One character only #define MSG_SHORT_MINUTE _UxGT("m") // One character only #define MSG_HEATING _UxGT("Heating...") #define MSG_COOLING _UxGT("Cooling...") #define MSG_BED_HEATING _UxGT("Bed heating...") #define MSG_BED_COOLING _UxGT("Bed cooling...") #define MSG_DELTA_CALIBRATE _UxGT("Delta Calibration") #define MSG_DELTA_CALIBRATE_X _UxGT("Calibrate X") #define MSG_DELTA_CALIBRATE_Y _UxGT("Calibrate Y") #define MSG_DELTA_CALIBRATE_Z _UxGT("Calibrate Z") #define MSG_DELTA_CALIBRATE_CENTER _UxGT("Calibrate Center") #define MSG_DELTA_SETTINGS _UxGT("Delta Settings") #define MSG_DELTA_AUTO_CALIBRATE _UxGT("Auto Calibration") #define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Set Delta Height") #define MSG_DELTA_Z_OFFSET_CALIBRATE _UxGT("Probe Z-offset") #define MSG_DELTA_DIAG_ROD _UxGT("Diag Rod") #define MSG_DELTA_HEIGHT _UxGT("Height") #define MSG_DELTA_RADIUS _UxGT("Radius") #define MSG_INFO_MENU _UxGT("About Printer") #define MSG_INFO_PRINTER_MENU _UxGT("Printer Info") #define MSG_3POINT_LEVELING _UxGT("3-Point Leveling") #define MSG_LINEAR_LEVELING _UxGT("Linear Leveling") #define MSG_BILINEAR_LEVELING _UxGT("Bilinear Leveling") #define MSG_UBL_LEVELING _UxGT("Unified Bed Leveling") #define MSG_MESH_LEVELING _UxGT("Mesh Leveling") #define MSG_INFO_STATS_MENU _UxGT("Printer Stats") #define MSG_INFO_BOARD_MENU _UxGT("Board Info") #define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistors") #define MSG_INFO_EXTRUDERS _UxGT("Extruders") #define MSG_INFO_BAUDRATE _UxGT("Baud") #define MSG_INFO_PROTOCOL _UxGT("Protocol") #define MSG_CASE_LIGHT _UxGT("Case light") #define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("Light Brightness") #if LCD_WIDTH >= 20 #define MSG_INFO_PRINT_COUNT _UxGT("Print Count") #define MSG_INFO_COMPLETED_PRINTS _UxGT("Completed") #define MSG_INFO_PRINT_TIME _UxGT("Total print time") #define MSG_INFO_PRINT_LONGEST _UxGT("Longest job time") #define MSG_INFO_PRINT_FILAMENT _UxGT("Extruded total") #else #define MSG_INFO_PRINT_COUNT _UxGT("Prints") #define MSG_INFO_COMPLETED_PRINTS _UxGT("Completed") #define MSG_INFO_PRINT_TIME _UxGT("Total") #define MSG_INFO_PRINT_LONGEST _UxGT("Longest") #define MSG_INFO_PRINT_FILAMENT _UxGT("Extruded") #endif #define MSG_INFO_MIN_TEMP _UxGT("Min Temp") #define MSG_INFO_MAX_TEMP _UxGT("Max Temp") #define MSG_INFO_PSU _UxGT("PSU") #define MSG_DRIVE_STRENGTH _UxGT("Drive Strength") #define MSG_DAC_PERCENT _UxGT("Driver %") #define MSG_DAC_EEPROM_WRITE _UxGT("DAC EEPROM Write") #define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("PRINT PAUSED") #define MSG_FILAMENT_CHANGE_HEADER_LOAD _UxGT("LOAD FILAMENT") #define MSG_FILAMENT_CHANGE_HEADER_UNLOAD _UxGT("UNLOAD FILAMENT") #define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:") #define MSG_FILAMENT_CHANGE_OPTION_PURGE _UxGT("Purge more") #define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Continue") #define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Nozzle: ") #define MSG_RUNOUT_SENSOR_ENABLE _UxGT("Runout Sensor") #define MSG_ERR_HOMING_FAILED _UxGT("Homing failed") #define MSG_ERR_PROBING_FAILED _UxGT("Probing failed") #define MSG_M600_TOO_COLD _UxGT("M600: Too cold") // // Filament Change screens show up to 3 lines on a 4-line display // ...or up to 2 lines on a 3-line display // #if LCD_HEIGHT >= 4 #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Wait for start") #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("of the filament") #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("change") #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Wait for") #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("filament unload") #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insert filament") #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("and press button") #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("to continue...") #define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Press button to") #define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("heat nozzle.") #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Heating nozzle") #define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Please wait...") #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Wait for") #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("filament load") #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Wait for") #define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("filament purge") #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wait for print") #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("to resume") #else // LCD_HEIGHT < 4 #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Please wait...") #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Ejecting...") #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insert and Click") #define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Click to heat") #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Heating...") #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Loading...") #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Purging...") #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Resuming...") #endif // LCD_HEIGHT < 4 #endif // LANGUAGE_KO_KR_H