/** * Marlin 3D Printer Firmware * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ #pragma once /** * French * * LCD Menu Messages * See also http://marlinfw.org/docs/development/lcd_language.html * */ #define DISPLAY_CHARSET_ISO10646_1 #define CHARSIZE 2 #define WELCOME_MSG MACHINE_NAME _UxGT(" prête.") #define MSG_BACK _UxGT("Retour") #define MSG_SD_INSERTED _UxGT("Carte insérée") #define MSG_SD_REMOVED _UxGT("Carte retirée") #define MSG_LCD_ENDSTOPS _UxGT("Butées") // Max length 8 characters #define MSG_MAIN _UxGT("Menu principal") #define MSG_AUTOSTART _UxGT("Demarrage auto") #define MSG_DISABLE_STEPPERS _UxGT("Arrêter moteurs") #define MSG_DEBUG_MENU _UxGT("Menu debug") #define MSG_PROGRESS_BAR_TEST _UxGT("Test barre progress.") #define MSG_AUTO_HOME _UxGT("Origine auto.") #define MSG_AUTO_HOME_X _UxGT("Origine X Auto.") #define MSG_AUTO_HOME_Y _UxGT("Origine Y Auto.") #define MSG_AUTO_HOME_Z _UxGT("Origine Z Auto.") #define MSG_LEVEL_BED_HOMING _UxGT("Origine XYZ") #define MSG_LEVEL_BED_WAITING _UxGT("Clic pour commencer") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Point suivant") #define MSG_LEVEL_BED_DONE _UxGT("Mise à niveau OK!") #define MSG_Z_FADE_HEIGHT _UxGT("Hauteur lissée") #define MSG_SET_HOME_OFFSETS _UxGT("Régl. décal. origine") #define MSG_HOME_OFFSETS_APPLIED _UxGT("Décalages appliqués") #define MSG_SET_ORIGIN _UxGT("Régler origine") #define MSG_PREHEAT_1 _UxGT("Préchauffage " PREHEAT_1_LABEL) #define MSG_PREHEAT_1_N _UxGT("Préchauff. " PREHEAT_1_LABEL " ") #define MSG_PREHEAT_1_ALL _UxGT("Préch. " PREHEAT_1_LABEL " Tout") #define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" buse") #define MSG_PREHEAT_1_BEDONLY _UxGT("Préch. " PREHEAT_1_LABEL " lit") #define MSG_PREHEAT_1_SETTINGS _UxGT("Régl. prech. " PREHEAT_1_LABEL) #define MSG_PREHEAT_2 _UxGT("Préchauffage " PREHEAT_2_LABEL) #define MSG_PREHEAT_2_N _UxGT("Préchauff. " PREHEAT_2_LABEL " ") #define MSG_PREHEAT_2_ALL _UxGT("Préch. " PREHEAT_2_LABEL " Tout") #define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" buse") #define MSG_PREHEAT_2_BEDONLY _UxGT("Préch. " PREHEAT_2_LABEL " lit") #define MSG_PREHEAT_2_SETTINGS _UxGT("Régl. prech. " PREHEAT_2_LABEL) #define MSG_COOLDOWN _UxGT("Refroidir") #define MSG_SWITCH_PS_ON _UxGT("Allumer alim.") #define MSG_SWITCH_PS_OFF _UxGT("Eteindre alim.") #define MSG_EXTRUDE _UxGT("Extrusion") #define MSG_RETRACT _UxGT("Retrait") #define MSG_MOVE_AXIS _UxGT("Déplacer un axe") #define MSG_BED_LEVELING _UxGT("Régl. Niv. lit") #define MSG_LEVEL_BED _UxGT("Régl. Niv. lit") #define MSG_LEVEL_CORNERS _UxGT("Niveau coins") #define MSG_NEXT_CORNER _UxGT("Coin suivant") #define MSG_EDITING_STOPPED _UxGT("Arrêt édit. maillage") #define MSG_USER_MENU _UxGT("Commandes perso") #define MSG_UBL_DOING_G29 _UxGT("G29 en cours") #define MSG_UBL_UNHOMED _UxGT("Origine XYZ d'abord") #define MSG_UBL_TOOLS _UxGT("Outils UBL") #define MSG_UBL_LEVEL_BED _UxGT("Niveau lit unifié") #define MSG_UBL_MANUAL_MESH _UxGT("Maillage manuel") #define MSG_UBL_BC_INSERT _UxGT("Poser câle & mesurer") #define MSG_UBL_BC_INSERT2 _UxGT("Mesure") #define MSG_UBL_BC_REMOVE _UxGT("ôter et mesurer lit") #define MSG_UBL_MOVING_TO_NEXT _UxGT("Aller au suivant") #define MSG_UBL_ACTIVATE_MESH _UxGT("Activer l'UBL") #define MSG_UBL_DEACTIVATE_MESH _UxGT("Désactiver l'UBL") #define MSG_UBL_SET_TEMP_BED _UxGT("Température lit") #define MSG_UBL_BED_TEMP_CUSTOM MSG_UBL_SET_TEMP_BED #define MSG_UBL_SET_TEMP_HOTEND _UxGT("Température buse") #define MSG_UBL_HOTEND_TEMP_CUSTOM MSG_UBL_SET_TEMP_HOTEND #define MSG_UBL_MESH_EDIT _UxGT("Editer maille") #define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Editer maille perso") #define MSG_UBL_FINE_TUNE_MESH _UxGT("Réglage fin maille") #define MSG_UBL_DONE_EDITING_MESH _UxGT("Terminer maille") #define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Créer maille perso") #define MSG_UBL_BUILD_MESH_MENU _UxGT("Créer maille") #define MSG_UBL_BUILD_MESH_M1 _UxGT("Créer maille " PREHEAT_1_LABEL) #define MSG_UBL_BUILD_MESH_M2 _UxGT("Créer maille " PREHEAT_2_LABEL) #define MSG_UBL_BUILD_COLD_MESH _UxGT("Créer maille froide") #define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Ajuster haut. maille") #define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Hauteur") #define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Valider maille") #define MSG_UBL_VALIDATE_MESH_M1 _UxGT("Valider maille " PREHEAT_1_LABEL) #define MSG_UBL_VALIDATE_MESH_M2 _UxGT("Valider maille " PREHEAT_2_LABEL) #define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Valider maille perso") #define MSG_UBL_CONTINUE_MESH _UxGT("Continuer maille") #define MSG_UBL_MESH_LEVELING _UxGT("Niveau par maille") #define MSG_UBL_3POINT_MESH_LEVELING _UxGT("Niveau à 3 points") #define MSG_UBL_GRID_MESH_LEVELING _UxGT("Niveau grille") #define MSG_UBL_MESH_LEVEL _UxGT("Maille de niveau") #define MSG_UBL_SIDE_POINTS _UxGT("Point latéral") #define MSG_UBL_MAP_TYPE _UxGT("Type de carte") #define MSG_UBL_OUTPUT_MAP _UxGT("Voir maille") #define MSG_UBL_OUTPUT_MAP_HOST _UxGT("Voir pour hôte") #define MSG_UBL_OUTPUT_MAP_CSV _UxGT("Voir pour CSV") #define MSG_UBL_OUTPUT_MAP_BACKUP _UxGT("Voir pour sauveg.") #define MSG_UBL_INFO_UBL _UxGT("Voir info UBL") #define MSG_EDIT_MESH _UxGT("Modifier maille") #define MSG_UBL_FILLIN_AMOUNT _UxGT("Taux de remplissage") #define MSG_UBL_MANUAL_FILLIN _UxGT("Remplissage manuel") #define MSG_UBL_SMART_FILLIN _UxGT("Remplissage auto") #define MSG_UBL_FILLIN_MESH _UxGT("Maille remplissage") #define MSG_UBL_INVALIDATE_ALL _UxGT("Tout annuler") #define MSG_UBL_INVALIDATE_CLOSEST _UxGT("Annuler le plus près") #define MSG_UBL_FINE_TUNE_ALL _UxGT("Réglage fin (tous)") #define MSG_UBL_FINE_TUNE_CLOSEST _UxGT("Réglage fin (proche)") #define MSG_UBL_STORAGE_MESH_MENU _UxGT("Stockage maille") #define MSG_UBL_STORAGE_SLOT _UxGT("Slot mémoire") #define MSG_UBL_LOAD_MESH _UxGT("Charger maille") #define MSG_UBL_SAVE_MESH _UxGT("Sauver maille") #define MSG_MESH_LOADED _UxGT("Maille %i charg.") #define MSG_MESH_SAVED _UxGT("Maille %i enreg.") #define MSG_NO_STORAGE _UxGT("Pas de mémoire") #define MSG_UBL_SAVE_ERROR _UxGT("Err: Enreg. UBL") #define MSG_UBL_RESTORE_ERROR _UxGT("Err: Ouvrir UBL") #define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Décal. Z arrêté") #define MSG_UBL_STEP_BY_STEP_MENU _UxGT("UBL Pas à pas") #define MSG_LED_CONTROL _UxGT("Contrôle LED") #define MSG_LEDS _UxGT("Lumière") #define MSG_LED_PRESETS _UxGT("Préregl. LED") #define MSG_SET_LEDS_RED _UxGT("Rouge") #define MSG_SET_LEDS_ORANGE _UxGT("Orange") #define MSG_SET_LEDS_YELLOW _UxGT("Jaune") #define MSG_SET_LEDS_GREEN _UxGT("Vert") #define MSG_SET_LEDS_BLUE _UxGT("Bleu") #define MSG_SET_LEDS_INDIGO _UxGT("Indigo") #define MSG_SET_LEDS_VIOLET _UxGT("Violet") #define MSG_SET_LEDS_WHITE _UxGT("Blanc") #define MSG_SET_LEDS_DEFAULT _UxGT("Defaut") #define MSG_CUSTOM_LEDS _UxGT("Lum. perso.") #define MSG_INTENSITY_R _UxGT("Intensité rouge") #define MSG_INTENSITY_G _UxGT("Intensité vert") #define MSG_INTENSITY_B _UxGT("Intensité bleu") #define MSG_INTENSITY_W _UxGT("Intensité blanc") #define MSG_LED_BRIGHTNESS _UxGT("Luminosité") #define MSG_MOVING _UxGT("Déplacement...") #define MSG_FREE_XY _UxGT("Débloquer XY") #define MSG_MOVE_X _UxGT("Dépl. X") #define MSG_MOVE_Y _UxGT("Dépl. Y") #define MSG_MOVE_Z _UxGT("Dépl. Z") #define MSG_MOVE_E _UxGT("Extrudeur") #define MSG_MOVE_01MM _UxGT("Dépl. 0.1mm") #define MSG_MOVE_1MM _UxGT("Dépl. 1mm") #define MSG_MOVE_10MM _UxGT("Dépl. 10mm") #define MSG_SPEED _UxGT("Vitesse") #define MSG_BED_Z _UxGT("Lit Z") #define MSG_NOZZLE _UxGT("Buse") #define MSG_BED _UxGT("Lit") #define MSG_FAN_SPEED _UxGT("Vitesse ventil.") #define MSG_EXTRA_FAN_SPEED _UxGT("Extra V ventil.") #define MSG_FLOW _UxGT("Flux") #define MSG_CONTROL _UxGT("Contrôler") #define MSG_MIN LCD_STR_THERMOMETER _UxGT(" Min") #define MSG_MAX LCD_STR_THERMOMETER _UxGT(" Max") #define MSG_FACTOR LCD_STR_THERMOMETER _UxGT(" Facteur") #define MSG_AUTOTEMP _UxGT("Temp. Auto.") #define MSG_LCD_ON _UxGT("Marche") #define MSG_LCD_OFF _UxGT("Arrêt") #define MSG_PID_P _UxGT("PID-P") #define MSG_PID_I _UxGT("PID-I") #define MSG_PID_D _UxGT("PID-D") #define MSG_PID_C _UxGT("PID-C") #define MSG_SELECT _UxGT("Sélectionner") #define MSG_ACC _UxGT("Accélération") #define MSG_JERK _UxGT("Jerk") #if IS_KINEMATIC #define MSG_VA_JERK _UxGT("Va jerk") #define MSG_VB_JERK _UxGT("Vb jerk") #define MSG_VC_JERK _UxGT("Vc jerk") #else #define MSG_VA_JERK _UxGT("Vx jerk") #define MSG_VB_JERK _UxGT("Vy jerk") #define MSG_VC_JERK _UxGT("Vz jerk") #endif #define MSG_VE_JERK _UxGT("Ve jerk") #define MSG_VELOCITY _UxGT("Vélocité") #define MSG_VMAX _UxGT("Vmax ") #define MSG_VMIN _UxGT("Vmin ") #define MSG_VTRAV_MIN _UxGT("V dépl. min") #define MSG_ACCELERATION _UxGT("Accélération") #define MSG_AMAX _UxGT("Amax ") #define MSG_A_RETRACT _UxGT("A retrait") #define MSG_A_TRAVEL _UxGT("A dépl.") #define MSG_STEPS_PER_MM _UxGT("Pas/mm") #if IS_KINEMATIC #define MSG_ASTEPS _UxGT("A pas/mm") #define MSG_BSTEPS _UxGT("B pas/mm") #define MSG_CSTEPS _UxGT("C pas/mm") #else #define MSG_ASTEPS _UxGT("X pas/mm") #define MSG_BSTEPS _UxGT("Y pas/mm") #define MSG_CSTEPS _UxGT("Z pas/mm") #endif #define MSG_ESTEPS _UxGT("E pas/mm") #define MSG_E1STEPS _UxGT("E1 pas/mm") #define MSG_E2STEPS _UxGT("E2 pas/mm") #define MSG_E3STEPS _UxGT("E3 pas/mm") #define MSG_E4STEPS _UxGT("E4 pas/mm") #define MSG_E5STEPS _UxGT("E5 pas/mm") #define MSG_E6STEPS _UxGT("E6 pas/mm") #define MSG_TEMPERATURE _UxGT("Température") #define MSG_MOTION _UxGT("Mouvement") #define MSG_FILAMENT _UxGT("Filament") #define MSG_VOLUMETRIC_ENABLED _UxGT("E en mm3") #define MSG_FILAMENT_DIAM _UxGT("Diam. Fil.") #define MSG_FILAMENT_UNLOAD _UxGT("Décharger mm") #define MSG_FILAMENT_LOAD _UxGT("Charger mm") #define MSG_ADVANCE_K _UxGT("Avance K") #define MSG_CONTRAST _UxGT("Contraste LCD") #define MSG_STORE_EEPROM _UxGT("Sauver config") #define MSG_LOAD_EEPROM _UxGT("Lire config") #define MSG_RESTORE_FAILSAFE _UxGT("Restaurer défauts") #define MSG_INIT_EEPROM _UxGT("Initialiser EEPROM") #define MSG_REFRESH _UxGT("Actualiser") #define MSG_WATCH _UxGT("Surveiller") #define MSG_PREPARE _UxGT("Préparer") #define MSG_TUNE _UxGT("Régler") #define MSG_PAUSE_PRINT _UxGT("Interrompre impr.") #define MSG_RESUME_PRINT _UxGT("Reprendre impr.") #define MSG_STOP_PRINT _UxGT("Arrêter impr.") #define MSG_CARD_MENU _UxGT("Impr. depuis SD") #define MSG_NO_CARD _UxGT("Pas de carte") #define MSG_DWELL _UxGT("Repos...") #define MSG_USERWAIT _UxGT("Atten. de l'util.") #define MSG_PRINT_PAUSED _UxGT("Impr. en pause") #define MSG_PRINT_ABORTED _UxGT("Impr. Annulée") #define MSG_NO_MOVE _UxGT("Moteurs bloqués.") #define MSG_KILLED _UxGT("MORT.") #define MSG_STOPPED _UxGT("STOPPÉ.") #define MSG_CONTROL_RETRACT _UxGT("Retrait mm") #define MSG_CONTROL_RETRACT_SWAP _UxGT("Ech. Retr. mm") #define MSG_CONTROL_RETRACTF _UxGT("Retrait V") #define MSG_CONTROL_RETRACT_ZHOP _UxGT("Saut Z mm") #define MSG_CONTROL_RETRACT_RECOVER _UxGT("Rappel mm") #define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Ech. Rappel mm") #define MSG_CONTROL_RETRACT_RECOVERF _UxGT("Rappel V") #define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("Ech. Rappel V") #define MSG_AUTORETRACT _UxGT("Retrait. Auto.") #define MSG_FILAMENTCHANGE _UxGT("Changer filament") #define MSG_FILAMENTLOAD _UxGT("Charger fil.") #define MSG_FILAMENTUNLOAD _UxGT("Décharger fil.") #define MSG_FILAMENTUNLOAD_ALL _UxGT("Décharger tout") #define MSG_INIT_SDCARD _UxGT("Init. la carte SD") #define MSG_CHANGE_SDCARD _UxGT("Changer de carte") #define MSG_ZPROBE_OUT _UxGT("Z sonde hors lit") #define MSG_SKEW_FACTOR _UxGT("Facteur écart") #define MSG_BLTOUCH _UxGT("BLTouch") #define MSG_BLTOUCH_SELFTEST _UxGT("Autotest BLTouch") #define MSG_BLTOUCH_RESET _UxGT("RaZ BLTouch") #define MSG_BLTOUCH_DEPLOY _UxGT("Déployer BLTouch") #define MSG_BLTOUCH_STOW _UxGT("Ranger BLTouch") #define MSG_HOME _UxGT("Origine") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST #define MSG_FIRST _UxGT("Premier") #define MSG_ZPROBE_ZOFFSET _UxGT("Décalage Z") #define MSG_BABYSTEP_X _UxGT("Babystep X") #define MSG_BABYSTEP_Y _UxGT("Babystep Y") #define MSG_BABYSTEP_Z _UxGT("Babystep Z") #define MSG_ENDSTOP_ABORT _UxGT("Butée abandon") #define MSG_HEATING_FAILED_LCD _UxGT("Erreur de chauffe") #define MSG_ERR_REDUNDANT_TEMP _UxGT("Err: TEMP. REDONDANTE") #define MSG_THERMAL_RUNAWAY _UxGT("EMBALLEMENT THERM.") #define MSG_ERR_MAXTEMP _UxGT("Err: TEMP. MAX") #define MSG_ERR_MINTEMP _UxGT("Err: TEMP. MIN") #define MSG_ERR_MAXTEMP_BED _UxGT("Err: TEMP. MAX LIT") #define MSG_ERR_MINTEMP_BED _UxGT("Err: TEMP. MIN LIT") #define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST #define MSG_HALTED _UxGT("IMPR. STOPPÉE") #define MSG_PLEASE_RESET _UxGT("RàZ. SVP") #define MSG_SHORT_DAY _UxGT("j") // One character only #define MSG_SHORT_HOUR _UxGT("h") // One character only #define MSG_SHORT_MINUTE _UxGT("m") // One character only #define MSG_HEATING _UxGT("En chauffe...") #define MSG_BED_HEATING _UxGT("Lit en chauffe...") #define MSG_DELTA_CALIBRATE _UxGT("Calibration Delta") #define MSG_DELTA_CALIBRATE_X _UxGT("Calibrer X") #define MSG_DELTA_CALIBRATE_Y _UxGT("Calibrer Y") #define MSG_DELTA_CALIBRATE_Z _UxGT("Calibrer Z") #define MSG_DELTA_CALIBRATE_CENTER _UxGT("Calibrer centre") #define MSG_DELTA_SETTINGS _UxGT("Réglages Delta") #define MSG_DELTA_AUTO_CALIBRATE _UxGT("Calibration Auto") #define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Hauteur Delta") #define MSG_DELTA_DIAG_ROD _UxGT("Diagonale") #define MSG_DELTA_HEIGHT _UxGT("Hauteur") #define MSG_DELTA_RADIUS _UxGT("Rayon") #define MSG_INFO_MENU _UxGT("Infos imprimante") #define MSG_INFO_PRINTER_MENU _UxGT("Infos imprimante") #define MSG_3POINT_LEVELING _UxGT("Niveau à 3 points") #define MSG_LINEAR_LEVELING _UxGT("Niveau linéaire") #define MSG_BILINEAR_LEVELING _UxGT("Niveau bilinéaire") #define MSG_UBL_LEVELING _UxGT("Niveau lit unifié") #define MSG_MESH_LEVELING _UxGT("Niveau maillage") #define MSG_INFO_STATS_MENU _UxGT("Stats. imprimante") #define MSG_INFO_BOARD_MENU _UxGT("Infos carte") #define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistors") #define MSG_INFO_EXTRUDERS _UxGT("Extrudeurs") #define MSG_INFO_BAUDRATE _UxGT("Baud") #define MSG_INFO_PROTOCOL _UxGT("Protocole") #define MSG_CASE_LIGHT _UxGT("Lumière caisson") #define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("Luminosité") #if LCD_WIDTH >= 20 #define MSG_INFO_PRINT_COUNT _UxGT("Nbre impressions") #define MSG_INFO_COMPLETED_PRINTS _UxGT("Terminées") #define MSG_INFO_PRINT_TIME _UxGT("Tps impr. total") #define MSG_INFO_PRINT_LONGEST _UxGT("Impr. la + longue") #define MSG_INFO_PRINT_FILAMENT _UxGT("Total filament") #else #define MSG_INFO_PRINT_COUNT _UxGT("Impressions") #define MSG_INFO_COMPLETED_PRINTS _UxGT("Terminées") #define MSG_INFO_PRINT_TIME _UxGT("Total") #define MSG_INFO_PRINT_LONGEST _UxGT("+ long") #define MSG_INFO_PRINT_FILAMENT _UxGT("Filament") #endif #define MSG_INFO_MIN_TEMP _UxGT("Temp Min") #define MSG_INFO_MAX_TEMP _UxGT("Temp Max") #define MSG_INFO_PSU _UxGT("Alimentation") #define MSG_DRIVE_STRENGTH _UxGT("Puiss. moteur ") #define MSG_DAC_PERCENT _UxGT("Driver %") #define MSG_DAC_EEPROM_WRITE _UxGT("DAC EEPROM sauv.") #define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("IMPR. PAUSE") #define MSG_FILAMENT_CHANGE_HEADER_LOAD _UxGT("CHARGER FIL") #define MSG_FILAMENT_CHANGE_HEADER_UNLOAD _UxGT("DECHARGER FIL") #define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("OPTIONS REPRISE:") #define MSG_FILAMENT_CHANGE_OPTION_PURGE _UxGT("Purger encore") #define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Reprendre impr.") #define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Buse: ") #define MSG_ERR_HOMING_FAILED _UxGT("Echec origine") #define MSG_ERR_PROBING_FAILED _UxGT("Echec sonde") #define MSG_M600_TOO_COLD _UxGT("M600: Trop froid") #if LCD_HEIGHT >= 4 // Up to 3 lines allowed #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Attente Démarrage") #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("du filament") #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("changer") #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Attente de") #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("décharger filament") #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insérer filament") #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("et app. bouton") #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("pour continuer...") #define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Presser le bouton...") #define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("Pr chauffer la buse") #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Buse en chauffe") #define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Patientez SVP...") #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Attente de") #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("Chargement filament") #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Attente") #define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("Purger filament") #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Attente impression") #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("pour reprendre") #else // LCD_HEIGHT < 4 // Up to 2 lines allowed #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Patientez...") #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Ejection...") #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insérer et clic") #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Chargement...") #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Reprise...") #endif // LCD_HEIGHT < 4