/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Danish
*
* LCD Menu Messages
* See also http://marlinfw.org/docs/development/lcd_language.html
*
*/
#define DISPLAY_CHARSET_ISO10646_1
namespace Language_da {
using namespace Language_en; // Inherit undefined strings from English
constexpr uint8_t CHARSIZE = 2;
PROGMEM Language_Str LANGUAGE = _UxGT("Danish");
PROGMEM Language_Str WELCOME_MSG = MACHINE_NAME _UxGT(" er klar");
PROGMEM Language_Str MSG_MEDIA_INSERTED = _UxGT("Kort isat");
PROGMEM Language_Str MSG_MEDIA_REMOVED = _UxGT("Kort fjernet");
PROGMEM Language_Str MSG_MAIN = _UxGT("Menu");
PROGMEM Language_Str MSG_DISABLE_STEPPERS = _UxGT("Slå alle steppere fra");
PROGMEM Language_Str MSG_AUTO_HOME = _UxGT("Auto Home"); // G28
PROGMEM Language_Str MSG_LEVEL_BED_WAITING = _UxGT("Klik når du er klar");
PROGMEM Language_Str MSG_LEVEL_BED_NEXT_POINT = _UxGT("Næste punkt");
PROGMEM Language_Str MSG_LEVEL_BED_DONE = _UxGT("Bed level er færdig!");
PROGMEM Language_Str MSG_SET_HOME_OFFSETS = _UxGT("Sæt forsk. af home");
PROGMEM Language_Str MSG_HOME_OFFSETS_APPLIED = _UxGT("Forsk. er nu aktiv");
PROGMEM Language_Str MSG_SET_ORIGIN = _UxGT("Sæt origin");
PROGMEM Language_Str MSG_PREHEAT_1 = _UxGT("Forvarm ") PREHEAT_1_LABEL;
PROGMEM Language_Str MSG_PREHEAT_1_H = _UxGT("Forvarm ") PREHEAT_1_LABEL " ~";
PROGMEM Language_Str MSG_PREHEAT_1_END = _UxGT("Forvarm ") PREHEAT_1_LABEL _UxGT(" end")
PROGMEM Language_Str MSG_PREHEAT_1_END_E = _UxGT("Forvarm ") PREHEAT_1_LABEL _UxGT(" end ~");
PROGMEM Language_Str MSG_PREHEAT_1_ALL = _UxGT("Forvarm ") PREHEAT_1_LABEL _UxGT(" Alle");
PROGMEM Language_Str MSG_PREHEAT_1_BEDONLY = _UxGT("Forvarm ") PREHEAT_1_LABEL _UxGT(" Bed");
PROGMEM Language_Str MSG_PREHEAT_1_SETTINGS = _UxGT("Forvarm ") PREHEAT_1_LABEL _UxGT(" conf");
PROGMEM Language_Str MSG_PREHEAT_2 = _UxGT("Forvarm ") PREHEAT_2_LABEL;
PROGMEM Language_Str MSG_PREHEAT_2_H = _UxGT("Forvarm ") PREHEAT_2_LABEL " ~";
PROGMEM Language_Str MSG_PREHEAT_2_END = _UxGT("Forvarm ") PREHEAT_2_LABEL _UxGT(" end")
PROGMEM Language_Str MSG_PREHEAT_2_END_E = _UxGT("Forvarm ") PREHEAT_2_LABEL _UxGT(" end ~");
PROGMEM Language_Str MSG_PREHEAT_2_ALL = _UxGT("Forvarm ") PREHEAT_2_LABEL _UxGT(" Alle");
PROGMEM Language_Str MSG_PREHEAT_2_BEDONLY = _UxGT("Forvarm ") PREHEAT_2_LABEL _UxGT(" Bed");
PROGMEM Language_Str MSG_PREHEAT_2_SETTINGS = _UxGT("Forvarm ") PREHEAT_2_LABEL _UxGT(" conf");
PROGMEM Language_Str MSG_COOLDOWN = _UxGT("Afkøl");
PROGMEM Language_Str MSG_SWITCH_PS_ON = _UxGT("Slå strøm til");
PROGMEM Language_Str MSG_SWITCH_PS_OFF = _UxGT("Slå strøm fra");
PROGMEM Language_Str MSG_EXTRUDE = _UxGT("Extruder");
PROGMEM Language_Str MSG_MOVE_AXIS = _UxGT("Flyt akser");
PROGMEM Language_Str MSG_BED_LEVELING = _UxGT("Juster bed");
PROGMEM Language_Str MSG_LEVEL_BED = _UxGT("Juster bed");
PROGMEM Language_Str MSG_MOVE_X = _UxGT("Flyt X");
PROGMEM Language_Str MSG_MOVE_Y = _UxGT("Flyt Y");
PROGMEM Language_Str MSG_MOVE_Z = _UxGT("Flyt Z");
PROGMEM Language_Str MSG_MOVE_Z_DIST = _UxGT("Flyt %smm");
PROGMEM Language_Str MSG_MOVE_01MM = _UxGT("Flyt 0.1mm");
PROGMEM Language_Str MSG_MOVE_1MM = _UxGT("Flyt 1mm");
PROGMEM Language_Str MSG_MOVE_10MM = _UxGT("Flyt 10mm");
PROGMEM Language_Str MSG_SPEED = _UxGT("Hastighed");
PROGMEM Language_Str MSG_BED_Z = _UxGT("Plade Z");
PROGMEM Language_Str MSG_NOZZLE = _UxGT("Dyse");
PROGMEM Language_Str MSG_NOZZLE_N = _UxGT("Dyse ~");
PROGMEM Language_Str MSG_BED = _UxGT("Plade");
PROGMEM Language_Str MSG_FAN_SPEED = _UxGT("Blæser hastighed");
PROGMEM Language_Str MSG_FAN_SPEED_N = _UxGT("Blæser hastighed ~");
PROGMEM Language_Str MSG_CONTROL = _UxGT("Kontrol");
PROGMEM Language_Str MSG_MIN = _UxGT(" \002 Min");
PROGMEM Language_Str MSG_MAX = _UxGT(" \002 Max");
PROGMEM Language_Str MSG_FACTOR = _UxGT(" \002 Fact");
PROGMEM Language_Str MSG_AUTOTEMP = _UxGT("Autotemp");
PROGMEM Language_Str MSG_LCD_ON = _UxGT("Til");
PROGMEM Language_Str MSG_LCD_OFF = _UxGT("Fra");
PROGMEM Language_Str MSG_SELECT = _UxGT("Vælg");
PROGMEM Language_Str MSG_SELECT_E = _UxGT("Vælg *");
PROGMEM Language_Str MSG_A_RETRACT = _UxGT("A-retract");
PROGMEM Language_Str MSG_A_TRAVEL = _UxGT("A-rejse");
PROGMEM Language_Str MSG_TEMPERATURE = _UxGT("Temperatur");
PROGMEM Language_Str MSG_MOTION = _UxGT("Bevægelse");
PROGMEM Language_Str MSG_FILAMENT = _UxGT("Filament");
PROGMEM Language_Str MSG_VOLUMETRIC_ENABLED = _UxGT("E i mm³");
PROGMEM Language_Str MSG_FILAMENT_DIAM = _UxGT("Fil. Dia.");
PROGMEM Language_Str MSG_FILAMENT_DIAM_E = _UxGT("Fil. Dia. *");
PROGMEM Language_Str MSG_CONTRAST = _UxGT("LCD kontrast");
PROGMEM Language_Str MSG_STORE_EEPROM = _UxGT("Gem i EEPROM");
PROGMEM Language_Str MSG_LOAD_EEPROM = _UxGT("Hent fra EEPROM");
PROGMEM Language_Str MSG_RESTORE_DEFAULTS = _UxGT("Gendan Defaults");
PROGMEM Language_Str MSG_REFRESH = LCD_STR_REFRESH _UxGT("Genopfrisk");
PROGMEM Language_Str MSG_INFO_SCREEN = _UxGT("Info skærm");
PROGMEM Language_Str MSG_PREPARE = _UxGT("Forbered");
PROGMEM Language_Str MSG_PAUSE_PRINT = _UxGT("Pause printet");
PROGMEM Language_Str MSG_RESUME_PRINT = _UxGT("Forsæt printet");
PROGMEM Language_Str MSG_STOP_PRINT = _UxGT("Stop printet");
PROGMEM Language_Str MSG_MEDIA_MENU = _UxGT("Print fra SD");
PROGMEM Language_Str MSG_NO_MEDIA = _UxGT("Intet SD kort");
PROGMEM Language_Str MSG_DWELL = _UxGT("Dvale...");
PROGMEM Language_Str MSG_USERWAIT = _UxGT("Venter på bruger...");
PROGMEM Language_Str MSG_PRINT_ABORTED = _UxGT("Print annulleret");
PROGMEM Language_Str MSG_NO_MOVE = _UxGT("Ingen bevægelse.");
PROGMEM Language_Str MSG_KILLED = _UxGT("DRÆBT. ");
PROGMEM Language_Str MSG_STOPPED = _UxGT("STOPPET. ");
PROGMEM Language_Str MSG_CONTROL_RETRACT = _UxGT("Tilbagetræk mm");
PROGMEM Language_Str MSG_CONTROL_RETRACT_SWAP = _UxGT("Skift Re.mm");
PROGMEM Language_Str MSG_CONTROL_RETRACTF = _UxGT("Tilbagetræk V");
PROGMEM Language_Str MSG_CONTROL_RETRACT_ZHOP = _UxGT("Hop mm");
PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVER = _UxGT("UnRet mm");
PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVER_SWAP = _UxGT("Skift UnRet mm");
PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVERF = _UxGT("UnRet V");
PROGMEM Language_Str MSG_AUTORETRACT = _UxGT("AutoRetr.");
PROGMEM Language_Str MSG_FILAMENTCHANGE = _UxGT("Skift filament");
PROGMEM Language_Str MSG_FILAMENTCHANGE_E = _UxGT("Skift filament *");
PROGMEM Language_Str MSG_CHANGE_MEDIA = _UxGT("Skift SD kort");
PROGMEM Language_Str MSG_ZPROBE_OUT = _UxGT("Probe udenfor plade");
PROGMEM Language_Str MSG_BLTOUCH_SELFTEST = _UxGT("BLTouch Selv-Test");
PROGMEM Language_Str MSG_HOME_FIRST = _UxGT("Home %s%s%s først");
PROGMEM Language_Str MSG_HEATING_FAILED_LCD = _UxGT("Opvarmning fejlet");
PROGMEM Language_Str MSG_ERR_REDUNDANT_TEMP = _UxGT("Fejl: reserve temp");
PROGMEM Language_Str MSG_THERMAL_RUNAWAY = _UxGT("Temp løber løbsk");
PROGMEM Language_Str MSG_ERR_MAXTEMP = _UxGT("Fejl: Maks temp");
PROGMEM Language_Str MSG_ERR_MINTEMP = _UxGT("Fejl: Min temp");
PROGMEM Language_Str MSG_ERR_MAXTEMP_BED = _UxGT("Fejl: Maks Plade temp");
PROGMEM Language_Str MSG_ERR_MINTEMP_BED = _UxGT("Fejl: Min Plade temp");
PROGMEM Language_Str MSG_ERR_Z_HOMING = _UxGT("Home XY først");
PROGMEM Language_Str MSG_HALTED = _UxGT("PRINTER STOPPET");
PROGMEM Language_Str MSG_PLEASE_RESET = _UxGT("Reset Venligst");
PROGMEM Language_Str MSG_SHORT_DAY = _UxGT("d"); // Kun et bogstav
PROGMEM Language_Str MSG_SHORT_HOUR = _UxGT("h"); // Kun et bogstav
PROGMEM Language_Str MSG_SHORT_MINUTE = _UxGT("m"); // Kun et bogstav
PROGMEM Language_Str MSG_HEATING = _UxGT("Opvarmer...");
PROGMEM Language_Str MSG_BED_HEATING = _UxGT("Opvarmer plade...");
PROGMEM Language_Str MSG_DELTA_CALIBRATE = _UxGT("Delta Kalibrering");
PROGMEM Language_Str MSG_DELTA_CALIBRATE_X = _UxGT("Kalibrer X");
PROGMEM Language_Str MSG_DELTA_CALIBRATE_Y = _UxGT("Kalibrer Y");
PROGMEM Language_Str MSG_DELTA_CALIBRATE_Z = _UxGT("Kalibrer Z");
PROGMEM Language_Str MSG_DELTA_CALIBRATE_CENTER = _UxGT("Kalibrerings Center");
PROGMEM Language_Str MSG_INFO_MENU = _UxGT("Om Printer");
PROGMEM Language_Str MSG_INFO_BOARD_MENU = _UxGT("Kort Info");
PROGMEM Language_Str MSG_INFO_THERMISTOR_MENU = _UxGT("Thermistors");
#if LCD_WIDTH >= 20
PROGMEM Language_Str MSG_INFO_PRINT_COUNT = _UxGT("Ant. Prints");
PROGMEM Language_Str MSG_INFO_COMPLETED_PRINTS = _UxGT("Færdige");
PROGMEM Language_Str MSG_INFO_PRINT_TIME = _UxGT("Total print tid");
PROGMEM Language_Str MSG_INFO_PRINT_LONGEST = _UxGT("Længste print");
PROGMEM Language_Str MSG_INFO_PRINT_FILAMENT = _UxGT("Total Extruderet");
#else
PROGMEM Language_Str MSG_INFO_PRINT_COUNT = _UxGT("Prints");
PROGMEM Language_Str MSG_INFO_COMPLETED_PRINTS = _UxGT("Færdige");
PROGMEM Language_Str MSG_INFO_PRINT_TIME = _UxGT("Total");
PROGMEM Language_Str MSG_INFO_PRINT_LONGEST = _UxGT("Længste");
PROGMEM Language_Str MSG_INFO_PRINT_FILAMENT = _UxGT("Extruderet");
#endif
PROGMEM Language_Str MSG_INFO_PSU = _UxGT("Strømfors.");
PROGMEM Language_Str MSG_DRIVE_STRENGTH = _UxGT("Driv Styrke");
PROGMEM Language_Str MSG_DAC_PERCENT_X = _UxGT("X Driv %");
PROGMEM Language_Str MSG_DAC_PERCENT_Y = _UxGT("Y Driv %");
PROGMEM Language_Str MSG_DAC_PERCENT_Z = _UxGT("Z Driv %");
PROGMEM Language_Str MSG_DAC_PERCENT_E = _UxGT("E Driv %");
PROGMEM Language_Str MSG_DAC_EEPROM_WRITE = _UxGT("DAC EEPROM Skriv");
PROGMEM Language_Str MSG_FILAMENT_CHANGE_OPTION_RESUME = _UxGT("Forsæt print");
PROGMEM Language_Str MSG_EXPECTED_PRINTER = _UxGT("Forkert printer");
#if LCD_HEIGHT >= 4
PROGMEM Language_Str MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_3_LINE("Vent på start", "af filament", "skift"));
PROGMEM Language_Str MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_2_LINE("Vent på", "filament udskyd."));
PROGMEM Language_Str MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_3_LINE("Indsæt filament", "og tryk på knap", "for at fortsætte..."));
PROGMEM Language_Str MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_2_LINE("Vent på", "filament indtag"));
PROGMEM Language_Str MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_2_LINE("Vent på at print", "fortsætter"));
#else // LCD_HEIGHT < 4
PROGMEM Language_Str MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_1_LINE("Vent venligst..."));
PROGMEM Language_Str MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_1_LINE("Udskyder..."));
PROGMEM Language_Str MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_1_LINE("Indsæt og klik"));
PROGMEM Language_Str MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_1_LINE("Indtager..."));
PROGMEM Language_Str MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_1_LINE("Fortsætter..."));
#endif // LCD_HEIGHT < 4
}