/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see .
*
*/
/**
* settings.cpp
*
* Settings and EEPROM storage
*
* IMPORTANT: Whenever there are changes made to the variables stored in EEPROM
* in the functions below, also increment the version number. This makes sure that
* the default values are used whenever there is a change to the data, to prevent
* wrong data being written to the variables.
*
* ALSO: Variables in the Store and Retrieve sections must be in the same order.
* If a feature is disabled, some data must still be written that, when read,
* either sets a Sane Default, or results in No Change to the existing value.
*/
// Change EEPROM version if the structure changes
#define EEPROM_VERSION "V84"
#define EEPROM_OFFSET 100
// Check the integrity of data offsets.
// Can be disabled for production build.
//#define DEBUG_EEPROM_READWRITE
#include "settings.h"
#include "endstops.h"
#include "planner.h"
#include "stepper.h"
#include "temperature.h"
#include "../lcd/marlinui.h"
#include "../libs/vector_3.h" // for matrix_3x3
#include "../gcode/gcode.h"
#include "../MarlinCore.h"
#if EITHER(EEPROM_SETTINGS, SD_FIRMWARE_UPDATE)
#include "../HAL/shared/eeprom_api.h"
#endif
#include "probe.h"
#if HAS_LEVELING
#include "../feature/bedlevel/bedlevel.h"
#endif
#if ENABLED(Z_STEPPER_AUTO_ALIGN)
#include "../feature/z_stepper_align.h"
#endif
#if ENABLED(EXTENSIBLE_UI)
#include "../lcd/extui/ui_api.h"
#endif
#if HAS_SERVOS
#include "servo.h"
#endif
#if HAS_SERVOS && HAS_SERVO_ANGLES
#define EEPROM_NUM_SERVOS NUM_SERVOS
#else
#define EEPROM_NUM_SERVOS NUM_SERVO_PLUGS
#endif
#include "../feature/fwretract.h"
#if ENABLED(POWER_LOSS_RECOVERY)
#include "../feature/powerloss.h"
#endif
#if HAS_POWER_MONITOR
#include "../feature/power_monitor.h"
#endif
#include "../feature/pause.h"
#if ENABLED(BACKLASH_COMPENSATION)
#include "../feature/backlash.h"
#endif
#if HAS_FILAMENT_SENSOR
#include "../feature/runout.h"
#ifndef FIL_RUNOUT_ENABLED_DEFAULT
#define FIL_RUNOUT_ENABLED_DEFAULT true
#endif
#endif
#if ENABLED(EXTRA_LIN_ADVANCE_K)
extern float other_extruder_advance_K[EXTRUDERS];
#endif
#if HAS_MULTI_EXTRUDER
#include "tool_change.h"
void M217_report(const bool eeprom);
#endif
#if ENABLED(BLTOUCH)
#include "../feature/bltouch.h"
#endif
#if HAS_TRINAMIC_CONFIG
#include "stepper/indirection.h"
#include "../feature/tmc_util.h"
#endif
#if ENABLED(PROBE_TEMP_COMPENSATION)
#include "../feature/probe_temp_comp.h"
#endif
#include "../feature/controllerfan.h"
#if ENABLED(CONTROLLER_FAN_EDITABLE)
void M710_report(const bool forReplay=true);
#endif
#if ENABLED(CASE_LIGHT_ENABLE)
#include "../feature/caselight.h"
#endif
#if ENABLED(PASSWORD_FEATURE)
#include "../feature/password/password.h"
#endif
#if ENABLED(TOUCH_SCREEN_CALIBRATION)
#include "../lcd/tft_io/touch_calibration.h"
#endif
#if HAS_ETHERNET
#include "../feature/ethernet.h"
#endif
#if ENABLED(SOUND_MENU_ITEM)
#include "../libs/buzzer.h"
#endif
#if ENABLED(DGUS_LCD_UI_MKS)
#include "../lcd/extui/dgus/DGUSScreenHandler.h"
#include "../lcd/extui/dgus/DGUSDisplayDef.h"
#endif
#pragma pack(push, 1) // No padding between variables
#if HAS_ETHERNET
void ETH0_report();
void MAC_report();
void M552_report();
void M553_report();
void M554_report();
#endif
#if EITHER(DELTA, HAS_EXTRA_ENDSTOPS)
void M666_report(const bool forReplay=true);
#endif
#define _EN_ITEM(N) , E##N
typedef struct { uint16_t LINEAR_AXIS_LIST(X, Y, Z, I, J, K), X2, Y2, Z2, Z3, Z4 REPEAT(E_STEPPERS, _EN_ITEM); } tmc_stepper_current_t;
typedef struct { uint32_t LINEAR_AXIS_LIST(X, Y, Z, I, J, K), X2, Y2, Z2, Z3, Z4 REPEAT(E_STEPPERS, _EN_ITEM); } tmc_hybrid_threshold_t;
typedef struct { int16_t LINEAR_AXIS_LIST(X, Y, Z, I, J, K), X2, Y2, Z2, Z3, Z4; } tmc_sgt_t;
typedef struct { bool LINEAR_AXIS_LIST(X, Y, Z, I, J, K), X2, Y2, Z2, Z3, Z4 REPEAT(E_STEPPERS, _EN_ITEM); } tmc_stealth_enabled_t;
#undef _EN_ITEM
// Limit an index to an array size
#define ALIM(I,ARR) _MIN(I, (signed)COUNT(ARR) - 1)
// Defaults for reset / fill in on load
static const uint32_t _DMA[] PROGMEM = DEFAULT_MAX_ACCELERATION;
static const float _DASU[] PROGMEM = DEFAULT_AXIS_STEPS_PER_UNIT;
static const feedRate_t _DMF[] PROGMEM = DEFAULT_MAX_FEEDRATE;
/**
* Current EEPROM Layout
*
* Keep this data structure up to date so
* EEPROM size is known at compile time!
*/
typedef struct SettingsDataStruct {
char version[4]; // Vnn\0
uint16_t crc; // Data Checksum
//
// DISTINCT_E_FACTORS
//
uint8_t esteppers; // DISTINCT_AXES - LINEAR_AXES
planner_settings_t planner_settings;
xyze_float_t planner_max_jerk; // M205 XYZE planner.max_jerk
float planner_junction_deviation_mm; // M205 J planner.junction_deviation_mm
xyz_pos_t home_offset; // M206 XYZ / M665 TPZ
#if HAS_HOTEND_OFFSET
xyz_pos_t hotend_offset[HOTENDS - 1]; // M218 XYZ
#endif
//
// FILAMENT_RUNOUT_SENSOR
//
bool runout_sensor_enabled; // M412 S
float runout_distance_mm; // M412 D
//
// ENABLE_LEVELING_FADE_HEIGHT
//
float planner_z_fade_height; // M420 Zn planner.z_fade_height
//
// MESH_BED_LEVELING
//
float mbl_z_offset; // mbl.z_offset
uint8_t mesh_num_x, mesh_num_y; // GRID_MAX_POINTS_X, GRID_MAX_POINTS_Y
float mbl_z_values[TERN(MESH_BED_LEVELING, GRID_MAX_POINTS_X, 3)] // mbl.z_values
[TERN(MESH_BED_LEVELING, GRID_MAX_POINTS_Y, 3)];
//
// HAS_BED_PROBE
//
xyz_pos_t probe_offset;
//
// ABL_PLANAR
//
matrix_3x3 planner_bed_level_matrix; // planner.bed_level_matrix
//
// AUTO_BED_LEVELING_BILINEAR
//
uint8_t grid_max_x, grid_max_y; // GRID_MAX_POINTS_X, GRID_MAX_POINTS_Y
xy_pos_t bilinear_grid_spacing, bilinear_start; // G29 L F
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
bed_mesh_t z_values; // G29
#else
float z_values[3][3];
#endif
//
// AUTO_BED_LEVELING_UBL
//
bool planner_leveling_active; // M420 S planner.leveling_active
int8_t ubl_storage_slot; // ubl.storage_slot
//
// SERVO_ANGLES
//
uint16_t servo_angles[EEPROM_NUM_SERVOS][2]; // M281 P L U
//
// Temperature first layer compensation values
//
#if ENABLED(PROBE_TEMP_COMPENSATION)
int16_t z_offsets_probe[COUNT(temp_comp.z_offsets_probe)], // M871 P I V
z_offsets_bed[COUNT(temp_comp.z_offsets_bed)] // M871 B I V
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
, z_offsets_ext[COUNT(temp_comp.z_offsets_ext)] // M871 E I V
#endif
;
#endif
//
// BLTOUCH
//
bool bltouch_last_written_mode;
//
// DELTA / [XYZ]_DUAL_ENDSTOPS
//
#if ENABLED(DELTA)
float delta_height; // M666 H
abc_float_t delta_endstop_adj; // M666 X Y Z
float delta_radius, // M665 R
delta_diagonal_rod, // M665 L
segments_per_second; // M665 S
abc_float_t delta_tower_angle_trim, // M665 X Y Z
delta_diagonal_rod_trim; // M665 A B C
#elif HAS_EXTRA_ENDSTOPS
float x2_endstop_adj, // M666 X
y2_endstop_adj, // M666 Y
z2_endstop_adj, // M666 (S2) Z
z3_endstop_adj, // M666 (S3) Z
z4_endstop_adj; // M666 (S4) Z
#endif
//
// Z_STEPPER_AUTO_ALIGN, Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS
//
#if ENABLED(Z_STEPPER_AUTO_ALIGN)
xy_pos_t z_stepper_align_xy[NUM_Z_STEPPER_DRIVERS]; // M422 S X Y
#if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS)
xy_pos_t z_stepper_align_stepper_xy[NUM_Z_STEPPER_DRIVERS]; // M422 W X Y
#endif
#endif
//
// Material Presets
//
#if PREHEAT_COUNT
preheat_t ui_material_preset[PREHEAT_COUNT]; // M145 S0 H B F
#endif
//
// PIDTEMP
//
PIDCF_t hotendPID[HOTENDS]; // M301 En PIDCF / M303 En U
int16_t lpq_len; // M301 L
//
// PIDTEMPBED
//
PID_t bedPID; // M304 PID / M303 E-1 U
//
// PIDTEMPCHAMBER
//
PID_t chamberPID; // M309 PID / M303 E-2 U
//
// User-defined Thermistors
//
#if HAS_USER_THERMISTORS
user_thermistor_t user_thermistor[USER_THERMISTORS]; // M305 P0 R4700 T100000 B3950
#endif
//
// Power monitor
//
uint8_t power_monitor_flags; // M430 I V W
//
// HAS_LCD_CONTRAST
//
int16_t lcd_contrast; // M250 C
//
// HAS_LCD_BRIGHTNESS
//
uint8_t lcd_brightness; // M256 B
//
// Controller fan settings
//
controllerFan_settings_t controllerFan_settings; // M710
//
// POWER_LOSS_RECOVERY
//
bool recovery_enabled; // M413 S
//
// FWRETRACT
//
fwretract_settings_t fwretract_settings; // M207 S F Z W, M208 S F W R
bool autoretract_enabled; // M209 S
//
// !NO_VOLUMETRIC
//
bool parser_volumetric_enabled; // M200 S parser.volumetric_enabled
float planner_filament_size[EXTRUDERS]; // M200 T D planner.filament_size[]
float planner_volumetric_extruder_limit[EXTRUDERS]; // M200 T L planner.volumetric_extruder_limit[]
//
// HAS_TRINAMIC_CONFIG
//
tmc_stepper_current_t tmc_stepper_current; // M906 X Y Z X2 Y2 Z2 Z3 Z4 E0 E1 E2 E3 E4 E5
tmc_hybrid_threshold_t tmc_hybrid_threshold; // M913 X Y Z X2 Y2 Z2 Z3 Z4 E0 E1 E2 E3 E4 E5
tmc_sgt_t tmc_sgt; // M914 X Y Z X2 Y2 Z2 Z3 Z4
tmc_stealth_enabled_t tmc_stealth_enabled; // M569 X Y Z X2 Y2 Z2 Z3 Z4 E0 E1 E2 E3 E4 E5
//
// LIN_ADVANCE
//
float planner_extruder_advance_K[_MAX(EXTRUDERS, 1)]; // M900 K planner.extruder_advance_K
//
// HAS_MOTOR_CURRENT_PWM
//
#ifndef MOTOR_CURRENT_COUNT
#define MOTOR_CURRENT_COUNT LINEAR_AXES
#endif
uint32_t motor_current_setting[MOTOR_CURRENT_COUNT]; // M907 X Z E ...
//
// CNC_COORDINATE_SYSTEMS
//
xyz_pos_t coordinate_system[MAX_COORDINATE_SYSTEMS]; // G54-G59.3
//
// SKEW_CORRECTION
//
skew_factor_t planner_skew_factor; // M852 I J K planner.skew_factor
//
// ADVANCED_PAUSE_FEATURE
//
#if HAS_EXTRUDERS
fil_change_settings_t fc_settings[EXTRUDERS]; // M603 T U L
#endif
//
// Tool-change settings
//
#if HAS_MULTI_EXTRUDER
toolchange_settings_t toolchange_settings; // M217 S P R
#endif
//
// BACKLASH_COMPENSATION
//
xyz_float_t backlash_distance_mm; // M425 X Y Z
uint8_t backlash_correction; // M425 F
float backlash_smoothing_mm; // M425 S
//
// EXTENSIBLE_UI
//
#if ENABLED(EXTENSIBLE_UI)
// This is a significant hardware change; don't reserve space when not present
uint8_t extui_data[ExtUI::eeprom_data_size];
#endif
//
// CASELIGHT_USES_BRIGHTNESS
//
#if CASELIGHT_USES_BRIGHTNESS
uint8_t caselight_brightness; // M355 P
#endif
//
// PASSWORD_FEATURE
//
#if ENABLED(PASSWORD_FEATURE)
bool password_is_set;
uint32_t password_value;
#endif
//
// TOUCH_SCREEN_CALIBRATION
//
#if ENABLED(TOUCH_SCREEN_CALIBRATION)
touch_calibration_t touch_calibration_data;
#endif
// Ethernet settings
#if HAS_ETHERNET
bool ethernet_hardware_enabled; // M552 S
uint32_t ethernet_ip, // M552 P
ethernet_dns,
ethernet_gateway, // M553 P
ethernet_subnet; // M554 P
#endif
//
// Buzzer enable/disable
//
#if ENABLED(SOUND_MENU_ITEM)
bool buzzer_enabled;
#endif
//
// MKS UI controller
//
#if ENABLED(DGUS_LCD_UI_MKS)
uint8_t mks_language_index; // Display Language
xy_int_t mks_corner_offsets[5]; // Bed Tramming
xyz_int_t mks_park_pos; // Custom Parking (without NOZZLE_PARK)
celsius_t mks_min_extrusion_temp; // Min E Temp (shadow M302 value)
#endif
#if HAS_MULTI_LANGUAGE
uint8_t ui_language; // M414 S
#endif
} SettingsData;
//static_assert(sizeof(SettingsData) <= MARLIN_EEPROM_SIZE, "EEPROM too small to contain SettingsData!");
MarlinSettings settings;
uint16_t MarlinSettings::datasize() { return sizeof(SettingsData); }
/**
* Post-process after Retrieve or Reset
*/
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
float new_z_fade_height;
#endif
void MarlinSettings::postprocess() {
xyze_pos_t oldpos = current_position;
// steps per s2 needs to be updated to agree with units per s2
planner.reset_acceleration_rates();
// Make sure delta kinematics are updated before refreshing the
// planner position so the stepper counts will be set correctly.
TERN_(DELTA, recalc_delta_settings());
TERN_(PIDTEMP, thermalManager.updatePID());
#if DISABLED(NO_VOLUMETRICS)
planner.calculate_volumetric_multipliers();
#elif EXTRUDERS
for (uint8_t i = COUNT(planner.e_factor); i--;)
planner.refresh_e_factor(i);
#endif
// Software endstops depend on home_offset
LOOP_LINEAR_AXES(i) {
update_workspace_offset((AxisEnum)i);
update_software_endstops((AxisEnum)i);
}
TERN_(ENABLE_LEVELING_FADE_HEIGHT, set_z_fade_height(new_z_fade_height, false)); // false = no report
TERN_(AUTO_BED_LEVELING_BILINEAR, refresh_bed_level());
TERN_(HAS_MOTOR_CURRENT_PWM, stepper.refresh_motor_power());
TERN_(FWRETRACT, fwretract.refresh_autoretract());
TERN_(HAS_LINEAR_E_JERK, planner.recalculate_max_e_jerk());
TERN_(CASELIGHT_USES_BRIGHTNESS, caselight.update_brightness());
TERN_(EXTENSIBLE_UI, ExtUI::onPostprocessSettings());
// Refresh steps_to_mm with the reciprocal of axis_steps_per_mm
// and init stepper.count[], planner.position[] with current_position
planner.refresh_positioning();
// Various factors can change the current position
if (oldpos != current_position)
report_current_position();
}
#if BOTH(PRINTCOUNTER, EEPROM_SETTINGS)
#include "printcounter.h"
static_assert(
!WITHIN(STATS_EEPROM_ADDRESS, EEPROM_OFFSET, EEPROM_OFFSET + sizeof(SettingsData)) &&
!WITHIN(STATS_EEPROM_ADDRESS + sizeof(printStatistics), EEPROM_OFFSET, EEPROM_OFFSET + sizeof(SettingsData)),
"STATS_EEPROM_ADDRESS collides with EEPROM settings storage."
);
#endif
#if ENABLED(SD_FIRMWARE_UPDATE)
#if ENABLED(EEPROM_SETTINGS)
static_assert(
!WITHIN(SD_FIRMWARE_UPDATE_EEPROM_ADDR, EEPROM_OFFSET, EEPROM_OFFSET + sizeof(SettingsData)),
"SD_FIRMWARE_UPDATE_EEPROM_ADDR collides with EEPROM settings storage."
);
#endif
bool MarlinSettings::sd_update_status() {
uint8_t val;
persistentStore.read_data(SD_FIRMWARE_UPDATE_EEPROM_ADDR, &val);
return (val == SD_FIRMWARE_UPDATE_ACTIVE_VALUE);
}
bool MarlinSettings::set_sd_update_status(const bool enable) {
if (enable != sd_update_status())
persistentStore.write_data(
SD_FIRMWARE_UPDATE_EEPROM_ADDR,
enable ? SD_FIRMWARE_UPDATE_ACTIVE_VALUE : SD_FIRMWARE_UPDATE_INACTIVE_VALUE
);
return true;
}
#endif // SD_FIRMWARE_UPDATE
#ifdef ARCHIM2_SPI_FLASH_EEPROM_BACKUP_SIZE
static_assert(EEPROM_OFFSET + sizeof(SettingsData) < ARCHIM2_SPI_FLASH_EEPROM_BACKUP_SIZE,
"ARCHIM2_SPI_FLASH_EEPROM_BACKUP_SIZE is insufficient to capture all EEPROM data.");
#endif
//
// This file simply uses the DEBUG_ECHO macros to implement EEPROM_CHITCHAT.
// For deeper debugging of EEPROM issues enable DEBUG_EEPROM_READWRITE.
//
#define DEBUG_OUT EITHER(EEPROM_CHITCHAT, DEBUG_LEVELING_FEATURE)
#include "../core/debug_out.h"
#if ENABLED(EEPROM_SETTINGS)
#define EEPROM_ASSERT(TST,ERR) do{ if (!(TST)) { SERIAL_ERROR_MSG(ERR); eeprom_error = true; } }while(0)
#if ENABLED(DEBUG_EEPROM_READWRITE)
#define _FIELD_TEST(FIELD) \
EEPROM_ASSERT( \
eeprom_error || eeprom_index == offsetof(SettingsData, FIELD) + EEPROM_OFFSET, \
"Field " STRINGIFY(FIELD) " mismatch." \
)
#else
#define _FIELD_TEST(FIELD) NOOP
#endif
const char version[4] = EEPROM_VERSION;
bool MarlinSettings::eeprom_error, MarlinSettings::validating;
int MarlinSettings::eeprom_index;
uint16_t MarlinSettings::working_crc;
bool MarlinSettings::size_error(const uint16_t size) {
if (size != datasize()) {
DEBUG_ERROR_MSG("EEPROM datasize error.");
return true;
}
return false;
}
/**
* M500 - Store Configuration
*/
bool MarlinSettings::save() {
float dummyf = 0;
char ver[4] = "ERR";
if (!EEPROM_START(EEPROM_OFFSET)) return false;
eeprom_error = false;
// Write or Skip version. (Flash doesn't allow rewrite without erase.)
TERN(FLASH_EEPROM_EMULATION, EEPROM_SKIP, EEPROM_WRITE)(ver);
EEPROM_SKIP(working_crc); // Skip the checksum slot
working_crc = 0; // clear before first "real data"
const uint8_t esteppers = COUNT(planner.settings.axis_steps_per_mm) - LINEAR_AXES;
_FIELD_TEST(esteppers);
EEPROM_WRITE(esteppers);
//
// Planner Motion
//
{
EEPROM_WRITE(planner.settings);
#if HAS_CLASSIC_JERK
EEPROM_WRITE(planner.max_jerk);
#if HAS_LINEAR_E_JERK
dummyf = float(DEFAULT_EJERK);
EEPROM_WRITE(dummyf);
#endif
#else
const xyze_pos_t planner_max_jerk = LOGICAL_AXIS_ARRAY(float(DEFAULT_EJERK), 10, 10, 0.4, 0.4, 0.4, 0.4);
EEPROM_WRITE(planner_max_jerk);
#endif
TERN_(CLASSIC_JERK, dummyf = 0.02f);
EEPROM_WRITE(TERN(CLASSIC_JERK, dummyf, planner.junction_deviation_mm));
}
//
// Home Offset
//
{
_FIELD_TEST(home_offset);
#if HAS_SCARA_OFFSET
EEPROM_WRITE(scara_home_offset);
#else
#if !HAS_HOME_OFFSET
const xyz_pos_t home_offset{0};
#endif
EEPROM_WRITE(home_offset);
#endif
}
//
// Hotend Offsets, if any
//
{
#if HAS_HOTEND_OFFSET
// Skip hotend 0 which must be 0
LOOP_S_L_N(e, 1, HOTENDS)
EEPROM_WRITE(hotend_offset[e]);
#endif
}
//
// Filament Runout Sensor
//
{
#if HAS_FILAMENT_SENSOR
const bool &runout_sensor_enabled = runout.enabled;
#else
constexpr int8_t runout_sensor_enabled = -1;
#endif
_FIELD_TEST(runout_sensor_enabled);
EEPROM_WRITE(runout_sensor_enabled);
#if HAS_FILAMENT_RUNOUT_DISTANCE
const float &runout_distance_mm = runout.runout_distance();
#else
constexpr float runout_distance_mm = 0;
#endif
EEPROM_WRITE(runout_distance_mm);
}
//
// Global Leveling
//
{
const float zfh = TERN(ENABLE_LEVELING_FADE_HEIGHT, planner.z_fade_height, (DEFAULT_LEVELING_FADE_HEIGHT));
EEPROM_WRITE(zfh);
}
//
// Mesh Bed Leveling
//
{
#if ENABLED(MESH_BED_LEVELING)
static_assert(
sizeof(mbl.z_values) == (GRID_MAX_POINTS) * sizeof(mbl.z_values[0][0]),
"MBL Z array is the wrong size."
);
#else
dummyf = 0;
#endif
const uint8_t mesh_num_x = TERN(MESH_BED_LEVELING, GRID_MAX_POINTS_X, 3),
mesh_num_y = TERN(MESH_BED_LEVELING, GRID_MAX_POINTS_Y, 3);
EEPROM_WRITE(TERN(MESH_BED_LEVELING, mbl.z_offset, dummyf));
EEPROM_WRITE(mesh_num_x);
EEPROM_WRITE(mesh_num_y);
#if ENABLED(MESH_BED_LEVELING)
EEPROM_WRITE(mbl.z_values);
#else
for (uint8_t q = mesh_num_x * mesh_num_y; q--;) EEPROM_WRITE(dummyf);
#endif
}
//
// Probe XYZ Offsets
//
{
_FIELD_TEST(probe_offset);
#if HAS_BED_PROBE
const xyz_pos_t &zpo = probe.offset;
#else
constexpr xyz_pos_t zpo{0};
#endif
EEPROM_WRITE(zpo);
}
//
// Planar Bed Leveling matrix
//
{
#if ABL_PLANAR
EEPROM_WRITE(planner.bed_level_matrix);
#else
dummyf = 0;
for (uint8_t q = 9; q--;) EEPROM_WRITE(dummyf);
#endif
}
//
// Bilinear Auto Bed Leveling
//
{
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
static_assert(
sizeof(z_values) == (GRID_MAX_POINTS) * sizeof(z_values[0][0]),
"Bilinear Z array is the wrong size."
);
#else
const xy_pos_t bilinear_start{0}, bilinear_grid_spacing{0};
#endif
const uint8_t grid_max_x = TERN(AUTO_BED_LEVELING_BILINEAR, GRID_MAX_POINTS_X, 3),
grid_max_y = TERN(AUTO_BED_LEVELING_BILINEAR, GRID_MAX_POINTS_Y, 3);
EEPROM_WRITE(grid_max_x);
EEPROM_WRITE(grid_max_y);
EEPROM_WRITE(bilinear_grid_spacing);
EEPROM_WRITE(bilinear_start);
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
EEPROM_WRITE(z_values); // 9-256 floats
#else
dummyf = 0;
for (uint16_t q = grid_max_x * grid_max_y; q--;) EEPROM_WRITE(dummyf);
#endif
}
//
// Unified Bed Leveling
//
{
_FIELD_TEST(planner_leveling_active);
const bool ubl_active = TERN(AUTO_BED_LEVELING_UBL, planner.leveling_active, false);
const int8_t storage_slot = TERN(AUTO_BED_LEVELING_UBL, ubl.storage_slot, -1);
EEPROM_WRITE(ubl_active);
EEPROM_WRITE(storage_slot);
}
//
// Servo Angles
//
{
_FIELD_TEST(servo_angles);
#if !HAS_SERVO_ANGLES
uint16_t servo_angles[EEPROM_NUM_SERVOS][2] = { { 0, 0 } };
#endif
EEPROM_WRITE(servo_angles);
}
//
// Thermal first layer compensation values
//
#if ENABLED(PROBE_TEMP_COMPENSATION)
EEPROM_WRITE(temp_comp.z_offsets_probe);
EEPROM_WRITE(temp_comp.z_offsets_bed);
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
EEPROM_WRITE(temp_comp.z_offsets_ext);
#endif
#else
// No placeholder data for this feature
#endif
//
// BLTOUCH
//
{
_FIELD_TEST(bltouch_last_written_mode);
const bool bltouch_last_written_mode = TERN(BLTOUCH, bltouch.last_written_mode, false);
EEPROM_WRITE(bltouch_last_written_mode);
}
//
// DELTA Geometry or Dual Endstops offsets
//
{
#if ENABLED(DELTA)
_FIELD_TEST(delta_height);
EEPROM_WRITE(delta_height); // 1 float
EEPROM_WRITE(delta_endstop_adj); // 3 floats
EEPROM_WRITE(delta_radius); // 1 float
EEPROM_WRITE(delta_diagonal_rod); // 1 float
EEPROM_WRITE(segments_per_second); // 1 float
EEPROM_WRITE(delta_tower_angle_trim); // 3 floats
EEPROM_WRITE(delta_diagonal_rod_trim); // 3 floats
#elif HAS_EXTRA_ENDSTOPS
_FIELD_TEST(x2_endstop_adj);
// Write dual endstops in X, Y, Z order. Unused = 0.0
dummyf = 0;
EEPROM_WRITE(TERN(X_DUAL_ENDSTOPS, endstops.x2_endstop_adj, dummyf)); // 1 float
EEPROM_WRITE(TERN(Y_DUAL_ENDSTOPS, endstops.y2_endstop_adj, dummyf)); // 1 float
EEPROM_WRITE(TERN(Z_MULTI_ENDSTOPS, endstops.z2_endstop_adj, dummyf)); // 1 float
#if ENABLED(Z_MULTI_ENDSTOPS) && NUM_Z_STEPPER_DRIVERS >= 3
EEPROM_WRITE(endstops.z3_endstop_adj); // 1 float
#else
EEPROM_WRITE(dummyf);
#endif
#if ENABLED(Z_MULTI_ENDSTOPS) && NUM_Z_STEPPER_DRIVERS >= 4
EEPROM_WRITE(endstops.z4_endstop_adj); // 1 float
#else
EEPROM_WRITE(dummyf);
#endif
#endif
}
#if ENABLED(Z_STEPPER_AUTO_ALIGN)
EEPROM_WRITE(z_stepper_align.xy);
#if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS)
EEPROM_WRITE(z_stepper_align.stepper_xy);
#endif
#endif
//
// LCD Preheat settings
//
#if PREHEAT_COUNT
_FIELD_TEST(ui_material_preset);
EEPROM_WRITE(ui.material_preset);
#endif
//
// PIDTEMP
//
{
_FIELD_TEST(hotendPID);
HOTEND_LOOP() {
PIDCF_t pidcf = {
#if DISABLED(PIDTEMP)
NAN, NAN, NAN,
NAN, NAN
#else
PID_PARAM(Kp, e),
unscalePID_i(PID_PARAM(Ki, e)),
unscalePID_d(PID_PARAM(Kd, e)),
PID_PARAM(Kc, e),
PID_PARAM(Kf, e)
#endif
};
EEPROM_WRITE(pidcf);
}
_FIELD_TEST(lpq_len);
#if DISABLED(PID_EXTRUSION_SCALING)
const int16_t lpq_len = 20;
#endif
EEPROM_WRITE(TERN(PID_EXTRUSION_SCALING, thermalManager.lpq_len, lpq_len));
}
//
// PIDTEMPBED
//
{
_FIELD_TEST(bedPID);
const PID_t bed_pid = {
#if DISABLED(PIDTEMPBED)
NAN, NAN, NAN
#else
// Store the unscaled PID values
thermalManager.temp_bed.pid.Kp,
unscalePID_i(thermalManager.temp_bed.pid.Ki),
unscalePID_d(thermalManager.temp_bed.pid.Kd)
#endif
};
EEPROM_WRITE(bed_pid);
}
//
// PIDTEMPCHAMBER
//
{
_FIELD_TEST(chamberPID);
const PID_t chamber_pid = {
#if DISABLED(PIDTEMPCHAMBER)
NAN, NAN, NAN
#else
// Store the unscaled PID values
thermalManager.temp_chamber.pid.Kp,
unscalePID_i(thermalManager.temp_chamber.pid.Ki),
unscalePID_d(thermalManager.temp_chamber.pid.Kd)
#endif
};
EEPROM_WRITE(chamber_pid);
}
//
// User-defined Thermistors
//
#if HAS_USER_THERMISTORS
{
_FIELD_TEST(user_thermistor);
EEPROM_WRITE(thermalManager.user_thermistor);
}
#endif
//
// Power monitor
//
{
#if HAS_POWER_MONITOR
const uint8_t &power_monitor_flags = power_monitor.flags;
#else
constexpr uint8_t power_monitor_flags = 0x00;
#endif
_FIELD_TEST(power_monitor_flags);
EEPROM_WRITE(power_monitor_flags);
}
//
// LCD Contrast
//
{
_FIELD_TEST(lcd_contrast);
const int16_t lcd_contrast = TERN(HAS_LCD_CONTRAST, ui.contrast, 127);
EEPROM_WRITE(lcd_contrast);
}
//
// LCD Brightness
//
{
_FIELD_TEST(lcd_brightness);
const uint8_t lcd_brightness = TERN(HAS_LCD_BRIGHTNESS, ui.brightness, 255);
EEPROM_WRITE(lcd_brightness);
}
//
// Controller Fan
//
{
_FIELD_TEST(controllerFan_settings);
#if ENABLED(USE_CONTROLLER_FAN)
const controllerFan_settings_t &cfs = controllerFan.settings;
#else
controllerFan_settings_t cfs = controllerFan_defaults;
#endif
EEPROM_WRITE(cfs);
}
//
// Power-Loss Recovery
//
{
_FIELD_TEST(recovery_enabled);
const bool recovery_enabled = TERN(POWER_LOSS_RECOVERY, recovery.enabled, ENABLED(PLR_ENABLED_DEFAULT));
EEPROM_WRITE(recovery_enabled);
}
//
// Firmware Retraction
//
{
_FIELD_TEST(fwretract_settings);
#if DISABLED(FWRETRACT)
const fwretract_settings_t autoretract_defaults = { 3, 45, 0, 0, 0, 13, 0, 8 };
#endif
EEPROM_WRITE(TERN(FWRETRACT, fwretract.settings, autoretract_defaults));
#if DISABLED(FWRETRACT_AUTORETRACT)
const bool autoretract_enabled = false;
#endif
EEPROM_WRITE(TERN(FWRETRACT_AUTORETRACT, fwretract.autoretract_enabled, autoretract_enabled));
}
//
// Volumetric & Filament Size
//
{
_FIELD_TEST(parser_volumetric_enabled);
#if DISABLED(NO_VOLUMETRICS)
EEPROM_WRITE(parser.volumetric_enabled);
EEPROM_WRITE(planner.filament_size);
#if ENABLED(VOLUMETRIC_EXTRUDER_LIMIT)
EEPROM_WRITE(planner.volumetric_extruder_limit);
#else
dummyf = DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT;
for (uint8_t q = EXTRUDERS; q--;) EEPROM_WRITE(dummyf);
#endif
#else
const bool volumetric_enabled = false;
EEPROM_WRITE(volumetric_enabled);
dummyf = DEFAULT_NOMINAL_FILAMENT_DIA;
for (uint8_t q = EXTRUDERS; q--;) EEPROM_WRITE(dummyf);
dummyf = DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT;
for (uint8_t q = EXTRUDERS; q--;) EEPROM_WRITE(dummyf);
#endif
}
//
// TMC Configuration
//
{
_FIELD_TEST(tmc_stepper_current);
tmc_stepper_current_t tmc_stepper_current{0};
#if HAS_TRINAMIC_CONFIG
#if AXIS_IS_TMC(X)
tmc_stepper_current.X = stepperX.getMilliamps();
#endif
#if AXIS_IS_TMC(Y)
tmc_stepper_current.Y = stepperY.getMilliamps();
#endif
#if AXIS_IS_TMC(Z)
tmc_stepper_current.Z = stepperZ.getMilliamps();
#endif
#if AXIS_IS_TMC(I)
tmc_stepper_current.I = stepperI.getMilliamps();
#endif
#if AXIS_IS_TMC(J)
tmc_stepper_current.J = stepperJ.getMilliamps();
#endif
#if AXIS_IS_TMC(K)
tmc_stepper_current.K = stepperK.getMilliamps();
#endif
#if AXIS_IS_TMC(X2)
tmc_stepper_current.X2 = stepperX2.getMilliamps();
#endif
#if AXIS_IS_TMC(Y2)
tmc_stepper_current.Y2 = stepperY2.getMilliamps();
#endif
#if AXIS_IS_TMC(Z2)
tmc_stepper_current.Z2 = stepperZ2.getMilliamps();
#endif
#if AXIS_IS_TMC(Z3)
tmc_stepper_current.Z3 = stepperZ3.getMilliamps();
#endif
#if AXIS_IS_TMC(Z4)
tmc_stepper_current.Z4 = stepperZ4.getMilliamps();
#endif
#if AXIS_IS_TMC(E0)
tmc_stepper_current.E0 = stepperE0.getMilliamps();
#endif
#if AXIS_IS_TMC(E1)
tmc_stepper_current.E1 = stepperE1.getMilliamps();
#endif
#if AXIS_IS_TMC(E2)
tmc_stepper_current.E2 = stepperE2.getMilliamps();
#endif
#if AXIS_IS_TMC(E3)
tmc_stepper_current.E3 = stepperE3.getMilliamps();
#endif
#if AXIS_IS_TMC(E4)
tmc_stepper_current.E4 = stepperE4.getMilliamps();
#endif
#if AXIS_IS_TMC(E5)
tmc_stepper_current.E5 = stepperE5.getMilliamps();
#endif
#if AXIS_IS_TMC(E6)
tmc_stepper_current.E6 = stepperE6.getMilliamps();
#endif
#if AXIS_IS_TMC(E7)
tmc_stepper_current.E7 = stepperE7.getMilliamps();
#endif
#endif
EEPROM_WRITE(tmc_stepper_current);
}
//
// TMC Hybrid Threshold, and placeholder values
//
{
_FIELD_TEST(tmc_hybrid_threshold);
#if ENABLED(HYBRID_THRESHOLD)
tmc_hybrid_threshold_t tmc_hybrid_threshold{0};
TERN_(X_HAS_STEALTHCHOP, tmc_hybrid_threshold.X = stepperX.get_pwm_thrs());
TERN_(Y_HAS_STEALTHCHOP, tmc_hybrid_threshold.Y = stepperY.get_pwm_thrs());
TERN_(Z_HAS_STEALTHCHOP, tmc_hybrid_threshold.Z = stepperZ.get_pwm_thrs());
TERN_(I_HAS_STEALTHCHOP, tmc_hybrid_threshold.I = stepperI.get_pwm_thrs());
TERN_(J_HAS_STEALTHCHOP, tmc_hybrid_threshold.J = stepperJ.get_pwm_thrs());
TERN_(K_HAS_STEALTHCHOP, tmc_hybrid_threshold.K = stepperK.get_pwm_thrs());
TERN_(X2_HAS_STEALTHCHOP, tmc_hybrid_threshold.X2 = stepperX2.get_pwm_thrs());
TERN_(Y2_HAS_STEALTHCHOP, tmc_hybrid_threshold.Y2 = stepperY2.get_pwm_thrs());
TERN_(Z2_HAS_STEALTHCHOP, tmc_hybrid_threshold.Z2 = stepperZ2.get_pwm_thrs());
TERN_(Z3_HAS_STEALTHCHOP, tmc_hybrid_threshold.Z3 = stepperZ3.get_pwm_thrs());
TERN_(Z4_HAS_STEALTHCHOP, tmc_hybrid_threshold.Z4 = stepperZ4.get_pwm_thrs());
TERN_(E0_HAS_STEALTHCHOP, tmc_hybrid_threshold.E0 = stepperE0.get_pwm_thrs());
TERN_(E1_HAS_STEALTHCHOP, tmc_hybrid_threshold.E1 = stepperE1.get_pwm_thrs());
TERN_(E2_HAS_STEALTHCHOP, tmc_hybrid_threshold.E2 = stepperE2.get_pwm_thrs());
TERN_(E3_HAS_STEALTHCHOP, tmc_hybrid_threshold.E3 = stepperE3.get_pwm_thrs());
TERN_(E4_HAS_STEALTHCHOP, tmc_hybrid_threshold.E4 = stepperE4.get_pwm_thrs());
TERN_(E5_HAS_STEALTHCHOP, tmc_hybrid_threshold.E5 = stepperE5.get_pwm_thrs());
TERN_(E6_HAS_STEALTHCHOP, tmc_hybrid_threshold.E6 = stepperE6.get_pwm_thrs());
TERN_(E7_HAS_STEALTHCHOP, tmc_hybrid_threshold.E7 = stepperE7.get_pwm_thrs());
#else
#define _EN_ITEM(N) , .E##N = 30
const tmc_hybrid_threshold_t tmc_hybrid_threshold = {
LINEAR_AXIS_LIST(.X = 100, .Y = 100, .Z = 3, .I = 3, .J = 3, .K = 3),
.X2 = 100, .Y2 = 100, .Z2 = 3, .Z3 = 3, .Z4 = 3
REPEAT(E_STEPPERS, _EN_ITEM)
};
#undef _EN_ITEM
#endif
EEPROM_WRITE(tmc_hybrid_threshold);
}
//
// TMC StallGuard threshold
//
{
tmc_sgt_t tmc_sgt{0};
#if USE_SENSORLESS
LINEAR_AXIS_CODE(
TERN_(X_SENSORLESS, tmc_sgt.X = stepperX.homing_threshold()),
TERN_(Y_SENSORLESS, tmc_sgt.Y = stepperY.homing_threshold()),
TERN_(Z_SENSORLESS, tmc_sgt.Z = stepperZ.homing_threshold()),
TERN_(I_SENSORLESS, tmc_sgt.I = stepperI.homing_threshold()),
TERN_(J_SENSORLESS, tmc_sgt.J = stepperJ.homing_threshold()),
TERN_(K_SENSORLESS, tmc_sgt.K = stepperK.homing_threshold())
);
TERN_(X2_SENSORLESS, tmc_sgt.X2 = stepperX2.homing_threshold());
TERN_(Y2_SENSORLESS, tmc_sgt.Y2 = stepperY2.homing_threshold());
TERN_(Z2_SENSORLESS, tmc_sgt.Z2 = stepperZ2.homing_threshold());
TERN_(Z3_SENSORLESS, tmc_sgt.Z3 = stepperZ3.homing_threshold());
TERN_(Z4_SENSORLESS, tmc_sgt.Z4 = stepperZ4.homing_threshold());
#endif
EEPROM_WRITE(tmc_sgt);
}
//
// TMC stepping mode
//
{
_FIELD_TEST(tmc_stealth_enabled);
tmc_stealth_enabled_t tmc_stealth_enabled = { false };
TERN_(X_HAS_STEALTHCHOP, tmc_stealth_enabled.X = stepperX.get_stored_stealthChop());
TERN_(Y_HAS_STEALTHCHOP, tmc_stealth_enabled.Y = stepperY.get_stored_stealthChop());
TERN_(Z_HAS_STEALTHCHOP, tmc_stealth_enabled.Z = stepperZ.get_stored_stealthChop());
TERN_(I_HAS_STEALTHCHOP, tmc_stealth_enabled.I = stepperI.get_stored_stealthChop());
TERN_(J_HAS_STEALTHCHOP, tmc_stealth_enabled.J = stepperJ.get_stored_stealthChop());
TERN_(K_HAS_STEALTHCHOP, tmc_stealth_enabled.K = stepperK.get_stored_stealthChop());
TERN_(X2_HAS_STEALTHCHOP, tmc_stealth_enabled.X2 = stepperX2.get_stored_stealthChop());
TERN_(Y2_HAS_STEALTHCHOP, tmc_stealth_enabled.Y2 = stepperY2.get_stored_stealthChop());
TERN_(Z2_HAS_STEALTHCHOP, tmc_stealth_enabled.Z2 = stepperZ2.get_stored_stealthChop());
TERN_(Z3_HAS_STEALTHCHOP, tmc_stealth_enabled.Z3 = stepperZ3.get_stored_stealthChop());
TERN_(Z4_HAS_STEALTHCHOP, tmc_stealth_enabled.Z4 = stepperZ4.get_stored_stealthChop());
TERN_(E0_HAS_STEALTHCHOP, tmc_stealth_enabled.E0 = stepperE0.get_stored_stealthChop());
TERN_(E1_HAS_STEALTHCHOP, tmc_stealth_enabled.E1 = stepperE1.get_stored_stealthChop());
TERN_(E2_HAS_STEALTHCHOP, tmc_stealth_enabled.E2 = stepperE2.get_stored_stealthChop());
TERN_(E3_HAS_STEALTHCHOP, tmc_stealth_enabled.E3 = stepperE3.get_stored_stealthChop());
TERN_(E4_HAS_STEALTHCHOP, tmc_stealth_enabled.E4 = stepperE4.get_stored_stealthChop());
TERN_(E5_HAS_STEALTHCHOP, tmc_stealth_enabled.E5 = stepperE5.get_stored_stealthChop());
TERN_(E6_HAS_STEALTHCHOP, tmc_stealth_enabled.E6 = stepperE6.get_stored_stealthChop());
TERN_(E7_HAS_STEALTHCHOP, tmc_stealth_enabled.E7 = stepperE7.get_stored_stealthChop());
EEPROM_WRITE(tmc_stealth_enabled);
}
//
// Linear Advance
//
{
_FIELD_TEST(planner_extruder_advance_K);
#if ENABLED(LIN_ADVANCE)
EEPROM_WRITE(planner.extruder_advance_K);
#else
dummyf = 0;
for (uint8_t q = _MAX(EXTRUDERS, 1); q--;) EEPROM_WRITE(dummyf);
#endif
}
//
// Motor Current PWM
//
{
_FIELD_TEST(motor_current_setting);
#if HAS_MOTOR_CURRENT_SPI || HAS_MOTOR_CURRENT_PWM
EEPROM_WRITE(stepper.motor_current_setting);
#else
const uint32_t no_current[MOTOR_CURRENT_COUNT] = { 0 };
EEPROM_WRITE(no_current);
#endif
}
//
// CNC Coordinate Systems
//
_FIELD_TEST(coordinate_system);
#if DISABLED(CNC_COORDINATE_SYSTEMS)
const xyz_pos_t coordinate_system[MAX_COORDINATE_SYSTEMS] = { { 0 } };
#endif
EEPROM_WRITE(TERN(CNC_COORDINATE_SYSTEMS, gcode.coordinate_system, coordinate_system));
//
// Skew correction factors
//
_FIELD_TEST(planner_skew_factor);
EEPROM_WRITE(planner.skew_factor);
//
// Advanced Pause filament load & unload lengths
//
#if HAS_EXTRUDERS
{
#if DISABLED(ADVANCED_PAUSE_FEATURE)
const fil_change_settings_t fc_settings[EXTRUDERS] = { 0, 0 };
#endif
_FIELD_TEST(fc_settings);
EEPROM_WRITE(fc_settings);
}
#endif
//
// Multiple Extruders
//
#if HAS_MULTI_EXTRUDER
_FIELD_TEST(toolchange_settings);
EEPROM_WRITE(toolchange_settings);
#endif
//
// Backlash Compensation
//
{
#if ENABLED(BACKLASH_GCODE)
const xyz_float_t &backlash_distance_mm = backlash.distance_mm;
const uint8_t &backlash_correction = backlash.correction;
#else
const xyz_float_t backlash_distance_mm{0};
const uint8_t backlash_correction = 0;
#endif
#if ENABLED(BACKLASH_GCODE) && defined(BACKLASH_SMOOTHING_MM)
const float &backlash_smoothing_mm = backlash.smoothing_mm;
#else
const float backlash_smoothing_mm = 3;
#endif
_FIELD_TEST(backlash_distance_mm);
EEPROM_WRITE(backlash_distance_mm);
EEPROM_WRITE(backlash_correction);
EEPROM_WRITE(backlash_smoothing_mm);
}
//
// Extensible UI User Data
//
#if ENABLED(EXTENSIBLE_UI)
{
char extui_data[ExtUI::eeprom_data_size] = { 0 };
ExtUI::onStoreSettings(extui_data);
_FIELD_TEST(extui_data);
EEPROM_WRITE(extui_data);
}
#endif
//
// Case Light Brightness
//
#if CASELIGHT_USES_BRIGHTNESS
EEPROM_WRITE(caselight.brightness);
#endif
//
// Password feature
//
#if ENABLED(PASSWORD_FEATURE)
EEPROM_WRITE(password.is_set);
EEPROM_WRITE(password.value);
#endif
//
// TOUCH_SCREEN_CALIBRATION
//
#if ENABLED(TOUCH_SCREEN_CALIBRATION)
EEPROM_WRITE(touch_calibration.calibration);
#endif
//
// Ethernet network info
//
#if HAS_ETHERNET
{
_FIELD_TEST(ethernet_hardware_enabled);
const bool ethernet_hardware_enabled = ethernet.hardware_enabled;
const uint32_t ethernet_ip = ethernet.ip,
ethernet_dns = ethernet.myDns,
ethernet_gateway = ethernet.gateway,
ethernet_subnet = ethernet.subnet;
EEPROM_WRITE(ethernet_hardware_enabled);
EEPROM_WRITE(ethernet_ip);
EEPROM_WRITE(ethernet_dns);
EEPROM_WRITE(ethernet_gateway);
EEPROM_WRITE(ethernet_subnet);
}
#endif
//
// Buzzer enable/disable
//
#if ENABLED(SOUND_MENU_ITEM)
EEPROM_WRITE(ui.buzzer_enabled);
#endif
//
// MKS UI controller
//
#if ENABLED(DGUS_LCD_UI_MKS)
EEPROM_WRITE(mks_language_index);
EEPROM_WRITE(mks_corner_offsets);
EEPROM_WRITE(mks_park_pos);
EEPROM_WRITE(mks_min_extrusion_temp);
#endif
//
// Selected LCD language
//
#if HAS_MULTI_LANGUAGE
EEPROM_WRITE(ui.language);
#endif
//
// Report final CRC and Data Size
//
if (!eeprom_error) {
const uint16_t eeprom_size = eeprom_index - (EEPROM_OFFSET),
final_crc = working_crc;
// Write the EEPROM header
eeprom_index = EEPROM_OFFSET;
EEPROM_WRITE(version);
EEPROM_WRITE(final_crc);
// Report storage size
DEBUG_ECHO_MSG("Settings Stored (", eeprom_size, " bytes; crc ", (uint32_t)final_crc, ")");
eeprom_error |= size_error(eeprom_size);
}
EEPROM_FINISH();
//
// UBL Mesh
//
#if ENABLED(UBL_SAVE_ACTIVE_ON_M500)
if (ubl.storage_slot >= 0)
store_mesh(ubl.storage_slot);
#endif
if (!eeprom_error) LCD_MESSAGEPGM(MSG_SETTINGS_STORED);
TERN_(EXTENSIBLE_UI, ExtUI::onConfigurationStoreWritten(!eeprom_error));
return !eeprom_error;
}
/**
* M501 - Retrieve Configuration
*/
bool MarlinSettings::_load() {
if (!EEPROM_START(EEPROM_OFFSET)) return false;
char stored_ver[4];
EEPROM_READ_ALWAYS(stored_ver);
uint16_t stored_crc;
EEPROM_READ_ALWAYS(stored_crc);
// Version has to match or defaults are used
if (strncmp(version, stored_ver, 3) != 0) {
if (stored_ver[3] != '\0') {
stored_ver[0] = '?';
stored_ver[1] = '\0';
}
DEBUG_ECHO_MSG("EEPROM version mismatch (EEPROM=", stored_ver, " Marlin=" EEPROM_VERSION ")");
IF_DISABLED(EEPROM_AUTO_INIT, ui.eeprom_alert_version());
eeprom_error = true;
}
else {
float dummyf = 0;
working_crc = 0; // Init to 0. Accumulated by EEPROM_READ
_FIELD_TEST(esteppers);
// Number of esteppers may change
uint8_t esteppers;
EEPROM_READ_ALWAYS(esteppers);
//
// Planner Motion
//
{
// Get only the number of E stepper parameters previously stored
// Any steppers added later are set to their defaults
uint32_t tmp1[LINEAR_AXES + esteppers];
float tmp2[LINEAR_AXES + esteppers];
feedRate_t tmp3[LINEAR_AXES + esteppers];
EEPROM_READ((uint8_t *)tmp1, sizeof(tmp1)); // max_acceleration_mm_per_s2
EEPROM_READ(planner.settings.min_segment_time_us);
EEPROM_READ((uint8_t *)tmp2, sizeof(tmp2)); // axis_steps_per_mm
EEPROM_READ((uint8_t *)tmp3, sizeof(tmp3)); // max_feedrate_mm_s
if (!validating) LOOP_DISTINCT_AXES(i) {
const bool in = (i < esteppers + LINEAR_AXES);
planner.settings.max_acceleration_mm_per_s2[i] = in ? tmp1[i] : pgm_read_dword(&_DMA[ALIM(i, _DMA)]);
planner.settings.axis_steps_per_mm[i] = in ? tmp2[i] : pgm_read_float(&_DASU[ALIM(i, _DASU)]);
planner.settings.max_feedrate_mm_s[i] = in ? tmp3[i] : pgm_read_float(&_DMF[ALIM(i, _DMF)]);
}
EEPROM_READ(planner.settings.acceleration);
EEPROM_READ(planner.settings.retract_acceleration);
EEPROM_READ(planner.settings.travel_acceleration);
EEPROM_READ(planner.settings.min_feedrate_mm_s);
EEPROM_READ(planner.settings.min_travel_feedrate_mm_s);
#if HAS_CLASSIC_JERK
EEPROM_READ(planner.max_jerk);
#if HAS_LINEAR_E_JERK
EEPROM_READ(dummyf);
#endif
#else
for (uint8_t q = LOGICAL_AXES; q--;) EEPROM_READ(dummyf);
#endif
EEPROM_READ(TERN(CLASSIC_JERK, dummyf, planner.junction_deviation_mm));
}
//
// Home Offset (M206 / M665)
//
{
_FIELD_TEST(home_offset);
#if HAS_SCARA_OFFSET
EEPROM_READ(scara_home_offset);
#else
#if !HAS_HOME_OFFSET
xyz_pos_t home_offset;
#endif
EEPROM_READ(home_offset);
#endif
}
//
// Hotend Offsets, if any
//
{
#if HAS_HOTEND_OFFSET
// Skip hotend 0 which must be 0
LOOP_S_L_N(e, 1, HOTENDS)
EEPROM_READ(hotend_offset[e]);
#endif
}
//
// Filament Runout Sensor
//
{
int8_t runout_sensor_enabled;
_FIELD_TEST(runout_sensor_enabled);
EEPROM_READ(runout_sensor_enabled);
#if HAS_FILAMENT_SENSOR
runout.enabled = runout_sensor_enabled < 0 ? FIL_RUNOUT_ENABLED_DEFAULT : runout_sensor_enabled;
#endif
TERN_(HAS_FILAMENT_SENSOR, if (runout.enabled) runout.reset());
float runout_distance_mm;
EEPROM_READ(runout_distance_mm);
#if HAS_FILAMENT_RUNOUT_DISTANCE
if (!validating) runout.set_runout_distance(runout_distance_mm);
#endif
}
//
// Global Leveling
//
EEPROM_READ(TERN(ENABLE_LEVELING_FADE_HEIGHT, new_z_fade_height, dummyf));
//
// Mesh (Manual) Bed Leveling
//
{
uint8_t mesh_num_x, mesh_num_y;
EEPROM_READ(dummyf);
EEPROM_READ_ALWAYS(mesh_num_x);
EEPROM_READ_ALWAYS(mesh_num_y);
#if ENABLED(MESH_BED_LEVELING)
if (!validating) mbl.z_offset = dummyf;
if (mesh_num_x == (GRID_MAX_POINTS_X) && mesh_num_y == (GRID_MAX_POINTS_Y)) {
// EEPROM data fits the current mesh
EEPROM_READ(mbl.z_values);
}
else {
// EEPROM data is stale
if (!validating) mbl.reset();
for (uint16_t q = mesh_num_x * mesh_num_y; q--;) EEPROM_READ(dummyf);
}
#else
// MBL is disabled - skip the stored data
for (uint16_t q = mesh_num_x * mesh_num_y; q--;) EEPROM_READ(dummyf);
#endif // MESH_BED_LEVELING
}
//
// Probe Z Offset
//
{
_FIELD_TEST(probe_offset);
#if HAS_BED_PROBE
const xyz_pos_t &zpo = probe.offset;
#else
xyz_pos_t zpo;
#endif
EEPROM_READ(zpo);
}
//
// Planar Bed Leveling matrix
//
{
#if ABL_PLANAR
EEPROM_READ(planner.bed_level_matrix);
#else
for (uint8_t q = 9; q--;) EEPROM_READ(dummyf);
#endif
}
//
// Bilinear Auto Bed Leveling
//
{
uint8_t grid_max_x, grid_max_y;
EEPROM_READ_ALWAYS(grid_max_x); // 1 byte
EEPROM_READ_ALWAYS(grid_max_y); // 1 byte
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
if (grid_max_x == (GRID_MAX_POINTS_X) && grid_max_y == (GRID_MAX_POINTS_Y)) {
if (!validating) set_bed_leveling_enabled(false);
EEPROM_READ(bilinear_grid_spacing); // 2 ints
EEPROM_READ(bilinear_start); // 2 ints
EEPROM_READ(z_values); // 9 to 256 floats
}
else // EEPROM data is stale
#endif // AUTO_BED_LEVELING_BILINEAR
{
// Skip past disabled (or stale) Bilinear Grid data
xy_pos_t bgs, bs;
EEPROM_READ(bgs);
EEPROM_READ(bs);
for (uint16_t q = grid_max_x * grid_max_y; q--;) EEPROM_READ(dummyf);
}
}
//
// Unified Bed Leveling active state
//
{
_FIELD_TEST(planner_leveling_active);
#if ENABLED(AUTO_BED_LEVELING_UBL)
const bool &planner_leveling_active = planner.leveling_active;
const int8_t &ubl_storage_slot = ubl.storage_slot;
#else
bool planner_leveling_active;
int8_t ubl_storage_slot;
#endif
EEPROM_READ(planner_leveling_active);
EEPROM_READ(ubl_storage_slot);
}
//
// SERVO_ANGLES
//
{
_FIELD_TEST(servo_angles);
#if ENABLED(EDITABLE_SERVO_ANGLES)
uint16_t (&servo_angles_arr)[EEPROM_NUM_SERVOS][2] = servo_angles;
#else
uint16_t servo_angles_arr[EEPROM_NUM_SERVOS][2];
#endif
EEPROM_READ(servo_angles_arr);
}
//
// Thermal first layer compensation values
//
#if ENABLED(PROBE_TEMP_COMPENSATION)
EEPROM_READ(temp_comp.z_offsets_probe);
EEPROM_READ(temp_comp.z_offsets_bed);
#if ENABLED(USE_TEMP_EXT_COMPENSATION)
EEPROM_READ(temp_comp.z_offsets_ext);
#endif
temp_comp.reset_index();
#else
// No placeholder data for this feature
#endif
//
// BLTOUCH
//
{
_FIELD_TEST(bltouch_last_written_mode);
#if ENABLED(BLTOUCH)
const bool &bltouch_last_written_mode = bltouch.last_written_mode;
#else
bool bltouch_last_written_mode;
#endif
EEPROM_READ(bltouch_last_written_mode);
}
//
// DELTA Geometry or Dual Endstops offsets
//
{
#if ENABLED(DELTA)
_FIELD_TEST(delta_height);
EEPROM_READ(delta_height); // 1 float
EEPROM_READ(delta_endstop_adj); // 3 floats
EEPROM_READ(delta_radius); // 1 float
EEPROM_READ(delta_diagonal_rod); // 1 float
EEPROM_READ(segments_per_second); // 1 float
EEPROM_READ(delta_tower_angle_trim); // 3 floats
EEPROM_READ(delta_diagonal_rod_trim); // 3 floats
#elif HAS_EXTRA_ENDSTOPS
_FIELD_TEST(x2_endstop_adj);
EEPROM_READ(TERN(X_DUAL_ENDSTOPS, endstops.x2_endstop_adj, dummyf)); // 1 float
EEPROM_READ(TERN(Y_DUAL_ENDSTOPS, endstops.y2_endstop_adj, dummyf)); // 1 float
EEPROM_READ(TERN(Z_MULTI_ENDSTOPS, endstops.z2_endstop_adj, dummyf)); // 1 float
#if ENABLED(Z_MULTI_ENDSTOPS) && NUM_Z_STEPPER_DRIVERS >= 3
EEPROM_READ(endstops.z3_endstop_adj); // 1 float
#else
EEPROM_READ(dummyf);
#endif
#if ENABLED(Z_MULTI_ENDSTOPS) && NUM_Z_STEPPER_DRIVERS >= 4
EEPROM_READ(endstops.z4_endstop_adj); // 1 float
#else
EEPROM_READ(dummyf);
#endif
#endif
}
#if ENABLED(Z_STEPPER_AUTO_ALIGN)
EEPROM_READ(z_stepper_align.xy);
#if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS)
EEPROM_READ(z_stepper_align.stepper_xy);
#endif
#endif
//
// LCD Preheat settings
//
#if PREHEAT_COUNT
_FIELD_TEST(ui_material_preset);
EEPROM_READ(ui.material_preset);
#endif
//
// Hotend PID
//
{
HOTEND_LOOP() {
PIDCF_t pidcf;
EEPROM_READ(pidcf);
#if ENABLED(PIDTEMP)
if (!validating && !isnan(pidcf.Kp)) {
// Scale PID values since EEPROM values are unscaled
PID_PARAM(Kp, e) = pidcf.Kp;
PID_PARAM(Ki, e) = scalePID_i(pidcf.Ki);
PID_PARAM(Kd, e) = scalePID_d(pidcf.Kd);
TERN_(PID_EXTRUSION_SCALING, PID_PARAM(Kc, e) = pidcf.Kc);
TERN_(PID_FAN_SCALING, PID_PARAM(Kf, e) = pidcf.Kf);
}
#endif
}
}
//
// PID Extrusion Scaling
//
{
_FIELD_TEST(lpq_len);
#if ENABLED(PID_EXTRUSION_SCALING)
const int16_t &lpq_len = thermalManager.lpq_len;
#else
int16_t lpq_len;
#endif
EEPROM_READ(lpq_len);
}
//
// Heated Bed PID
//
{
PID_t pid;
EEPROM_READ(pid);
#if ENABLED(PIDTEMPBED)
if (!validating && !isnan(pid.Kp)) {
// Scale PID values since EEPROM values are unscaled
thermalManager.temp_bed.pid.Kp = pid.Kp;
thermalManager.temp_bed.pid.Ki = scalePID_i(pid.Ki);
thermalManager.temp_bed.pid.Kd = scalePID_d(pid.Kd);
}
#endif
}
//
// Heated Chamber PID
//
{
PID_t pid;
EEPROM_READ(pid);
#if ENABLED(PIDTEMPCHAMBER)
if (!validating && !isnan(pid.Kp)) {
// Scale PID values since EEPROM values are unscaled
thermalManager.temp_chamber.pid.Kp = pid.Kp;
thermalManager.temp_chamber.pid.Ki = scalePID_i(pid.Ki);
thermalManager.temp_chamber.pid.Kd = scalePID_d(pid.Kd);
}
#endif
}
//
// User-defined Thermistors
//
#if HAS_USER_THERMISTORS
{
_FIELD_TEST(user_thermistor);
EEPROM_READ(thermalManager.user_thermistor);
}
#endif
//
// Power monitor
//
{
#if HAS_POWER_MONITOR
uint8_t &power_monitor_flags = power_monitor.flags;
#else
uint8_t power_monitor_flags;
#endif
_FIELD_TEST(power_monitor_flags);
EEPROM_READ(power_monitor_flags);
}
//
// LCD Contrast
//
{
_FIELD_TEST(lcd_contrast);
int16_t lcd_contrast;
EEPROM_READ(lcd_contrast);
if (!validating) {
TERN_(HAS_LCD_CONTRAST, ui.set_contrast(lcd_contrast));
}
}
//
// LCD Brightness
//
{
_FIELD_TEST(lcd_brightness);
uint8_t lcd_brightness;
EEPROM_READ(lcd_brightness);
TERN_(HAS_LCD_BRIGHTNESS, if (!validating) ui.set_brightness(lcd_brightness));
}
//
// Controller Fan
//
{
_FIELD_TEST(controllerFan_settings);
#if ENABLED(CONTROLLER_FAN_EDITABLE)
const controllerFan_settings_t &cfs = controllerFan.settings;
#else
controllerFan_settings_t cfs = { 0 };
#endif
EEPROM_READ(cfs);
}
//
// Power-Loss Recovery
//
{
_FIELD_TEST(recovery_enabled);
#if ENABLED(POWER_LOSS_RECOVERY)
const bool &recovery_enabled = recovery.enabled;
#else
bool recovery_enabled;
#endif
EEPROM_READ(recovery_enabled);
}
//
// Firmware Retraction
//
{
_FIELD_TEST(fwretract_settings);
#if ENABLED(FWRETRACT)
EEPROM_READ(fwretract.settings);
#else
fwretract_settings_t fwretract_settings;
EEPROM_READ(fwretract_settings);
#endif
#if BOTH(FWRETRACT, FWRETRACT_AUTORETRACT)
EEPROM_READ(fwretract.autoretract_enabled);
#else
bool autoretract_enabled;
EEPROM_READ(autoretract_enabled);
#endif
}
//
// Volumetric & Filament Size
//
{
struct {
bool volumetric_enabled;
float filament_size[EXTRUDERS];
float volumetric_extruder_limit[EXTRUDERS];
} storage;
_FIELD_TEST(parser_volumetric_enabled);
EEPROM_READ(storage);
#if DISABLED(NO_VOLUMETRICS)
if (!validating) {
parser.volumetric_enabled = storage.volumetric_enabled;
COPY(planner.filament_size, storage.filament_size);
#if ENABLED(VOLUMETRIC_EXTRUDER_LIMIT)
COPY(planner.volumetric_extruder_limit, storage.volumetric_extruder_limit);
#endif
}
#endif
}
//
// TMC Stepper Settings
//
if (!validating) reset_stepper_drivers();
// TMC Stepper Current
{
_FIELD_TEST(tmc_stepper_current);
tmc_stepper_current_t currents;
EEPROM_READ(currents);
#if HAS_TRINAMIC_CONFIG
#define SET_CURR(Q) stepper##Q.rms_current(currents.Q ? currents.Q : Q##_CURRENT)
if (!validating) {
#if AXIS_IS_TMC(X)
SET_CURR(X);
#endif
#if AXIS_IS_TMC(Y)
SET_CURR(Y);
#endif
#if AXIS_IS_TMC(Z)
SET_CURR(Z);
#endif
#if AXIS_IS_TMC(X2)
SET_CURR(X2);
#endif
#if AXIS_IS_TMC(Y2)
SET_CURR(Y2);
#endif
#if AXIS_IS_TMC(Z2)
SET_CURR(Z2);
#endif
#if AXIS_IS_TMC(Z3)
SET_CURR(Z3);
#endif
#if AXIS_IS_TMC(Z4)
SET_CURR(Z4);
#endif
#if AXIS_IS_TMC(I)
SET_CURR(I);
#endif
#if AXIS_IS_TMC(J)
SET_CURR(J);
#endif
#if AXIS_IS_TMC(K)
SET_CURR(K);
#endif
#if AXIS_IS_TMC(E0)
SET_CURR(E0);
#endif
#if AXIS_IS_TMC(E1)
SET_CURR(E1);
#endif
#if AXIS_IS_TMC(E2)
SET_CURR(E2);
#endif
#if AXIS_IS_TMC(E3)
SET_CURR(E3);
#endif
#if AXIS_IS_TMC(E4)
SET_CURR(E4);
#endif
#if AXIS_IS_TMC(E5)
SET_CURR(E5);
#endif
#if AXIS_IS_TMC(E6)
SET_CURR(E6);
#endif
#if AXIS_IS_TMC(E7)
SET_CURR(E7);
#endif
}
#endif
}
// TMC Hybrid Threshold
{
tmc_hybrid_threshold_t tmc_hybrid_threshold;
_FIELD_TEST(tmc_hybrid_threshold);
EEPROM_READ(tmc_hybrid_threshold);
#if ENABLED(HYBRID_THRESHOLD)
if (!validating) {
TERN_(X_HAS_STEALTHCHOP, stepperX.set_pwm_thrs(tmc_hybrid_threshold.X));
TERN_(Y_HAS_STEALTHCHOP, stepperY.set_pwm_thrs(tmc_hybrid_threshold.Y));
TERN_(Z_HAS_STEALTHCHOP, stepperZ.set_pwm_thrs(tmc_hybrid_threshold.Z));
TERN_(X2_HAS_STEALTHCHOP, stepperX2.set_pwm_thrs(tmc_hybrid_threshold.X2));
TERN_(Y2_HAS_STEALTHCHOP, stepperY2.set_pwm_thrs(tmc_hybrid_threshold.Y2));
TERN_(Z2_HAS_STEALTHCHOP, stepperZ2.set_pwm_thrs(tmc_hybrid_threshold.Z2));
TERN_(Z3_HAS_STEALTHCHOP, stepperZ3.set_pwm_thrs(tmc_hybrid_threshold.Z3));
TERN_(Z4_HAS_STEALTHCHOP, stepperZ4.set_pwm_thrs(tmc_hybrid_threshold.Z4));
TERN_(I_HAS_STEALTHCHOP, stepperI.set_pwm_thrs(tmc_hybrid_threshold.I));
TERN_(J_HAS_STEALTHCHOP, stepperJ.set_pwm_thrs(tmc_hybrid_threshold.J));
TERN_(K_HAS_STEALTHCHOP, stepperK.set_pwm_thrs(tmc_hybrid_threshold.K));
TERN_(E0_HAS_STEALTHCHOP, stepperE0.set_pwm_thrs(tmc_hybrid_threshold.E0));
TERN_(E1_HAS_STEALTHCHOP, stepperE1.set_pwm_thrs(tmc_hybrid_threshold.E1));
TERN_(E2_HAS_STEALTHCHOP, stepperE2.set_pwm_thrs(tmc_hybrid_threshold.E2));
TERN_(E3_HAS_STEALTHCHOP, stepperE3.set_pwm_thrs(tmc_hybrid_threshold.E3));
TERN_(E4_HAS_STEALTHCHOP, stepperE4.set_pwm_thrs(tmc_hybrid_threshold.E4));
TERN_(E5_HAS_STEALTHCHOP, stepperE5.set_pwm_thrs(tmc_hybrid_threshold.E5));
TERN_(E6_HAS_STEALTHCHOP, stepperE6.set_pwm_thrs(tmc_hybrid_threshold.E6));
TERN_(E7_HAS_STEALTHCHOP, stepperE7.set_pwm_thrs(tmc_hybrid_threshold.E7));
}
#endif
}
//
// TMC StallGuard threshold.
//
{
tmc_sgt_t tmc_sgt;
_FIELD_TEST(tmc_sgt);
EEPROM_READ(tmc_sgt);
#if USE_SENSORLESS
if (!validating) {
LINEAR_AXIS_CODE(
TERN_(X_SENSORLESS, stepperX.homing_threshold(tmc_sgt.X)),
TERN_(Y_SENSORLESS, stepperY.homing_threshold(tmc_sgt.Y)),
TERN_(Z_SENSORLESS, stepperZ.homing_threshold(tmc_sgt.Z)),
TERN_(I_SENSORLESS, stepperI.homing_threshold(tmc_sgt.I)),
TERN_(J_SENSORLESS, stepperJ.homing_threshold(tmc_sgt.J)),
TERN_(K_SENSORLESS, stepperK.homing_threshold(tmc_sgt.K))
);
TERN_(X2_SENSORLESS, stepperX2.homing_threshold(tmc_sgt.X2));
TERN_(Y2_SENSORLESS, stepperY2.homing_threshold(tmc_sgt.Y2));
TERN_(Z2_SENSORLESS, stepperZ2.homing_threshold(tmc_sgt.Z2));
TERN_(Z3_SENSORLESS, stepperZ3.homing_threshold(tmc_sgt.Z3));
TERN_(Z4_SENSORLESS, stepperZ4.homing_threshold(tmc_sgt.Z4));
}
#endif
}
// TMC stepping mode
{
_FIELD_TEST(tmc_stealth_enabled);
tmc_stealth_enabled_t tmc_stealth_enabled;
EEPROM_READ(tmc_stealth_enabled);
#if HAS_TRINAMIC_CONFIG
#define SET_STEPPING_MODE(ST) stepper##ST.stored.stealthChop_enabled = tmc_stealth_enabled.ST; stepper##ST.refresh_stepping_mode();
if (!validating) {
TERN_(X_HAS_STEALTHCHOP, SET_STEPPING_MODE(X));
TERN_(Y_HAS_STEALTHCHOP, SET_STEPPING_MODE(Y));
TERN_(Z_HAS_STEALTHCHOP, SET_STEPPING_MODE(Z));
TERN_(I_HAS_STEALTHCHOP, SET_STEPPING_MODE(I));
TERN_(J_HAS_STEALTHCHOP, SET_STEPPING_MODE(J));
TERN_(K_HAS_STEALTHCHOP, SET_STEPPING_MODE(K));
TERN_(X2_HAS_STEALTHCHOP, SET_STEPPING_MODE(X2));
TERN_(Y2_HAS_STEALTHCHOP, SET_STEPPING_MODE(Y2));
TERN_(Z2_HAS_STEALTHCHOP, SET_STEPPING_MODE(Z2));
TERN_(Z3_HAS_STEALTHCHOP, SET_STEPPING_MODE(Z3));
TERN_(Z4_HAS_STEALTHCHOP, SET_STEPPING_MODE(Z4));
TERN_(E0_HAS_STEALTHCHOP, SET_STEPPING_MODE(E0));
TERN_(E1_HAS_STEALTHCHOP, SET_STEPPING_MODE(E1));
TERN_(E2_HAS_STEALTHCHOP, SET_STEPPING_MODE(E2));
TERN_(E3_HAS_STEALTHCHOP, SET_STEPPING_MODE(E3));
TERN_(E4_HAS_STEALTHCHOP, SET_STEPPING_MODE(E4));
TERN_(E5_HAS_STEALTHCHOP, SET_STEPPING_MODE(E5));
TERN_(E6_HAS_STEALTHCHOP, SET_STEPPING_MODE(E6));
TERN_(E7_HAS_STEALTHCHOP, SET_STEPPING_MODE(E7));
}
#endif
}
//
// Linear Advance
//
{
float extruder_advance_K[_MAX(EXTRUDERS, 1)];
_FIELD_TEST(planner_extruder_advance_K);
EEPROM_READ(extruder_advance_K);
#if ENABLED(LIN_ADVANCE)
if (!validating)
COPY(planner.extruder_advance_K, extruder_advance_K);
#endif
}
//
// Motor Current PWM
//
{
_FIELD_TEST(motor_current_setting);
uint32_t motor_current_setting[MOTOR_CURRENT_COUNT]
#if HAS_MOTOR_CURRENT_SPI
= DIGIPOT_MOTOR_CURRENT
#endif
;
#if HAS_MOTOR_CURRENT_SPI
DEBUG_ECHO_MSG("DIGIPOTS Loading");
#endif
EEPROM_READ(motor_current_setting);
#if HAS_MOTOR_CURRENT_SPI
DEBUG_ECHO_MSG("DIGIPOTS Loaded");
#endif
#if HAS_MOTOR_CURRENT_SPI || HAS_MOTOR_CURRENT_PWM
if (!validating)
COPY(stepper.motor_current_setting, motor_current_setting);
#endif
}
//
// CNC Coordinate System
//
{
_FIELD_TEST(coordinate_system);
#if ENABLED(CNC_COORDINATE_SYSTEMS)
if (!validating) (void)gcode.select_coordinate_system(-1); // Go back to machine space
EEPROM_READ(gcode.coordinate_system);
#else
xyz_pos_t coordinate_system[MAX_COORDINATE_SYSTEMS];
EEPROM_READ(coordinate_system);
#endif
}
//
// Skew correction factors
//
{
skew_factor_t skew_factor;
_FIELD_TEST(planner_skew_factor);
EEPROM_READ(skew_factor);
#if ENABLED(SKEW_CORRECTION_GCODE)
if (!validating) {
planner.skew_factor.xy = skew_factor.xy;
#if ENABLED(SKEW_CORRECTION_FOR_Z)
planner.skew_factor.xz = skew_factor.xz;
planner.skew_factor.yz = skew_factor.yz;
#endif
}
#endif
}
//
// Advanced Pause filament load & unload lengths
//
#if HAS_EXTRUDERS
{
#if DISABLED(ADVANCED_PAUSE_FEATURE)
fil_change_settings_t fc_settings[EXTRUDERS];
#endif
_FIELD_TEST(fc_settings);
EEPROM_READ(fc_settings);
}
#endif
//
// Tool-change settings
//
#if HAS_MULTI_EXTRUDER
_FIELD_TEST(toolchange_settings);
EEPROM_READ(toolchange_settings);
#endif
//
// Backlash Compensation
//
{
#if ENABLED(BACKLASH_GCODE)
const xyz_float_t &backlash_distance_mm = backlash.distance_mm;
const uint8_t &backlash_correction = backlash.correction;
#else
xyz_float_t backlash_distance_mm;
uint8_t backlash_correction;
#endif
#if ENABLED(BACKLASH_GCODE) && defined(BACKLASH_SMOOTHING_MM)
const float &backlash_smoothing_mm = backlash.smoothing_mm;
#else
float backlash_smoothing_mm;
#endif
_FIELD_TEST(backlash_distance_mm);
EEPROM_READ(backlash_distance_mm);
EEPROM_READ(backlash_correction);
EEPROM_READ(backlash_smoothing_mm);
}
//
// Extensible UI User Data
//
#if ENABLED(EXTENSIBLE_UI)
{ // This is a significant hardware change; don't reserve EEPROM space when not present
const char extui_data[ExtUI::eeprom_data_size] = { 0 };
_FIELD_TEST(extui_data);
EEPROM_READ(extui_data);
if (!validating) ExtUI::onLoadSettings(extui_data);
}
#endif
//
// Case Light Brightness
//
#if CASELIGHT_USES_BRIGHTNESS
_FIELD_TEST(caselight_brightness);
EEPROM_READ(caselight.brightness);
#endif
//
// Password feature
//
#if ENABLED(PASSWORD_FEATURE)
_FIELD_TEST(password_is_set);
EEPROM_READ(password.is_set);
EEPROM_READ(password.value);
#endif
//
// TOUCH_SCREEN_CALIBRATION
//
#if ENABLED(TOUCH_SCREEN_CALIBRATION)
_FIELD_TEST(touch_calibration_data);
EEPROM_READ(touch_calibration.calibration);
#endif
//
// Ethernet network info
//
#if HAS_ETHERNET
_FIELD_TEST(ethernet_hardware_enabled);
uint32_t ethernet_ip, ethernet_dns, ethernet_gateway, ethernet_subnet;
EEPROM_READ(ethernet.hardware_enabled);
EEPROM_READ(ethernet_ip); ethernet.ip = ethernet_ip;
EEPROM_READ(ethernet_dns); ethernet.myDns = ethernet_dns;
EEPROM_READ(ethernet_gateway); ethernet.gateway = ethernet_gateway;
EEPROM_READ(ethernet_subnet); ethernet.subnet = ethernet_subnet;
#endif
//
// Buzzer enable/disable
//
#if ENABLED(SOUND_MENU_ITEM)
_FIELD_TEST(buzzer_enabled);
EEPROM_READ(ui.buzzer_enabled);
#endif
//
// MKS UI controller
//
#if ENABLED(DGUS_LCD_UI_MKS)
_FIELD_TEST(mks_language_index);
EEPROM_READ(mks_language_index);
EEPROM_READ(mks_corner_offsets);
EEPROM_READ(mks_park_pos);
EEPROM_READ(mks_min_extrusion_temp);
#endif
//
// Selected LCD language
//
#if HAS_MULTI_LANGUAGE
{
uint8_t ui_language;
EEPROM_READ(ui_language);
if (ui_language >= NUM_LANGUAGES) ui_language = 0;
ui.set_language(ui_language);
}
#endif
//
// Validate Final Size and CRC
//
eeprom_error = size_error(eeprom_index - (EEPROM_OFFSET));
if (eeprom_error) {
DEBUG_ECHO_MSG("Index: ", eeprom_index - (EEPROM_OFFSET), " Size: ", datasize());
IF_DISABLED(EEPROM_AUTO_INIT, ui.eeprom_alert_index());
}
else if (working_crc != stored_crc) {
eeprom_error = true;
DEBUG_ERROR_MSG("EEPROM CRC mismatch - (stored) ", stored_crc, " != ", working_crc, " (calculated)!");
IF_DISABLED(EEPROM_AUTO_INIT, ui.eeprom_alert_crc());
}
else if (!validating) {
DEBUG_ECHO_START();
DEBUG_ECHO(version);
DEBUG_ECHOLNPAIR(" stored settings retrieved (", eeprom_index - (EEPROM_OFFSET), " bytes; crc ", (uint32_t)working_crc, ")");
}
if (!validating && !eeprom_error) postprocess();
#if ENABLED(AUTO_BED_LEVELING_UBL)
if (!validating) {
ubl.report_state();
if (!ubl.sanity_check()) {
SERIAL_EOL();
#if BOTH(EEPROM_CHITCHAT, DEBUG_LEVELING_FEATURE)
ubl.echo_name();
DEBUG_ECHOLNPGM(" initialized.\n");
#endif
}
else {
eeprom_error = true;
#if BOTH(EEPROM_CHITCHAT, DEBUG_LEVELING_FEATURE)
DEBUG_ECHOPGM("?Can't enable ");
ubl.echo_name();
DEBUG_ECHOLNPGM(".");
#endif
ubl.reset();
}
if (ubl.storage_slot >= 0) {
load_mesh(ubl.storage_slot);
DEBUG_ECHOLNPAIR("Mesh ", ubl.storage_slot, " loaded from storage.");
}
else {
ubl.reset();
DEBUG_ECHOLNPGM("UBL reset");
}
}
#endif
}
#if ENABLED(EEPROM_CHITCHAT) && DISABLED(DISABLE_M503)
// Report the EEPROM settings
if (!validating && TERN1(EEPROM_BOOT_SILENT, IsRunning())) report();
#endif
EEPROM_FINISH();
return !eeprom_error;
}
#ifdef ARCHIM2_SPI_FLASH_EEPROM_BACKUP_SIZE
extern bool restoreEEPROM();
#endif
bool MarlinSettings::validate() {
validating = true;
#ifdef ARCHIM2_SPI_FLASH_EEPROM_BACKUP_SIZE
bool success = _load();
if (!success && restoreEEPROM()) {
SERIAL_ECHOLNPGM("Recovered backup EEPROM settings from SPI Flash");
success = _load();
}
#else
const bool success = _load();
#endif
validating = false;
return success;
}
bool MarlinSettings::load() {
if (validate()) {
const bool success = _load();
TERN_(EXTENSIBLE_UI, ExtUI::onConfigurationStoreRead(success));
return success;
}
reset();
#if ENABLED(EEPROM_AUTO_INIT)
(void)save();
SERIAL_ECHO_MSG("EEPROM Initialized");
#endif
return false;
}
#if ENABLED(AUTO_BED_LEVELING_UBL)
inline void ubl_invalid_slot(const int s) {
DEBUG_ECHOLNPAIR("?Invalid slot.\n", s, " mesh slots available.");
UNUSED(s);
}
const uint16_t MarlinSettings::meshes_end = persistentStore.capacity() - 129; // 128 (+1 because of the change to capacity rather than last valid address)
// is a placeholder for the size of the MAT; the MAT will always
// live at the very end of the eeprom
uint16_t MarlinSettings::meshes_start_index() {
return (datasize() + EEPROM_OFFSET + 32) & 0xFFF8; // Pad the end of configuration data so it can float up
// or down a little bit without disrupting the mesh data
}
#define MESH_STORE_SIZE sizeof(TERN(OPTIMIZED_MESH_STORAGE, mesh_store_t, ubl.z_values))
uint16_t MarlinSettings::calc_num_meshes() {
return (meshes_end - meshes_start_index()) / MESH_STORE_SIZE;
}
int MarlinSettings::mesh_slot_offset(const int8_t slot) {
return meshes_end - (slot + 1) * MESH_STORE_SIZE;
}
void MarlinSettings::store_mesh(const int8_t slot) {
#if ENABLED(AUTO_BED_LEVELING_UBL)
const int16_t a = calc_num_meshes();
if (!WITHIN(slot, 0, a - 1)) {
ubl_invalid_slot(a);
DEBUG_ECHOLNPAIR("E2END=", persistentStore.capacity() - 1, " meshes_end=", meshes_end, " slot=", slot);
DEBUG_EOL();
return;
}
int pos = mesh_slot_offset(slot);
uint16_t crc = 0;
#if ENABLED(OPTIMIZED_MESH_STORAGE)
int16_t z_mesh_store[GRID_MAX_POINTS_X][GRID_MAX_POINTS_Y];
ubl.set_store_from_mesh(ubl.z_values, z_mesh_store);
uint8_t * const src = (uint8_t*)&z_mesh_store;
#else
uint8_t * const src = (uint8_t*)&ubl.z_values;
#endif
// Write crc to MAT along with other data, or just tack on to the beginning or end
persistentStore.access_start();
const bool status = persistentStore.write_data(pos, src, MESH_STORE_SIZE, &crc);
persistentStore.access_finish();
if (status) SERIAL_ECHOLNPGM("?Unable to save mesh data.");
else DEBUG_ECHOLNPAIR("Mesh saved in slot ", slot);
#else
// Other mesh types
#endif
}
void MarlinSettings::load_mesh(const int8_t slot, void * const into/*=nullptr*/) {
#if ENABLED(AUTO_BED_LEVELING_UBL)
const int16_t a = settings.calc_num_meshes();
if (!WITHIN(slot, 0, a - 1)) {
ubl_invalid_slot(a);
return;
}
int pos = mesh_slot_offset(slot);
uint16_t crc = 0;
#if ENABLED(OPTIMIZED_MESH_STORAGE)
int16_t z_mesh_store[GRID_MAX_POINTS_X][GRID_MAX_POINTS_Y];
uint8_t * const dest = (uint8_t*)&z_mesh_store;
#else
uint8_t * const dest = into ? (uint8_t*)into : (uint8_t*)&ubl.z_values;
#endif
persistentStore.access_start();
const uint16_t status = persistentStore.read_data(pos, dest, MESH_STORE_SIZE, &crc);
persistentStore.access_finish();
#if ENABLED(OPTIMIZED_MESH_STORAGE)
if (into) {
float z_values[GRID_MAX_POINTS_X][GRID_MAX_POINTS_Y];
ubl.set_mesh_from_store(z_mesh_store, z_values);
memcpy(into, z_values, sizeof(z_values));
}
else
ubl.set_mesh_from_store(z_mesh_store, ubl.z_values);
#endif
if (status) SERIAL_ECHOLNPGM("?Unable to load mesh data.");
else DEBUG_ECHOLNPAIR("Mesh loaded from slot ", slot);
EEPROM_FINISH();
#else
// Other mesh types
#endif
}
//void MarlinSettings::delete_mesh() { return; }
//void MarlinSettings::defrag_meshes() { return; }
#endif // AUTO_BED_LEVELING_UBL
#else // !EEPROM_SETTINGS
bool MarlinSettings::save() {
DEBUG_ERROR_MSG("EEPROM disabled");
return false;
}
#endif // !EEPROM_SETTINGS
/**
* M502 - Reset Configuration
*/
void MarlinSettings::reset() {
LOOP_DISTINCT_AXES(i) {
planner.settings.max_acceleration_mm_per_s2[i] = pgm_read_dword(&_DMA[ALIM(i, _DMA)]);
planner.settings.axis_steps_per_mm[i] = pgm_read_float(&_DASU[ALIM(i, _DASU)]);
planner.settings.max_feedrate_mm_s[i] = pgm_read_float(&_DMF[ALIM(i, _DMF)]);
}
planner.settings.min_segment_time_us = DEFAULT_MINSEGMENTTIME;
planner.settings.acceleration = DEFAULT_ACCELERATION;
planner.settings.retract_acceleration = DEFAULT_RETRACT_ACCELERATION;
planner.settings.travel_acceleration = DEFAULT_TRAVEL_ACCELERATION;
planner.settings.min_feedrate_mm_s = feedRate_t(DEFAULT_MINIMUMFEEDRATE);
planner.settings.min_travel_feedrate_mm_s = feedRate_t(DEFAULT_MINTRAVELFEEDRATE);
#if HAS_CLASSIC_JERK
#ifndef DEFAULT_XJERK
#define DEFAULT_XJERK 0
#endif
#if HAS_Y_AXIS && !defined(DEFAULT_YJERK)
#define DEFAULT_YJERK 0
#endif
#if HAS_Z_AXIS && !defined(DEFAULT_ZJERK)
#define DEFAULT_ZJERK 0
#endif
#if LINEAR_AXES >= 4 && !defined(DEFAULT_IJERK)
#define DEFAULT_IJERK 0
#endif
#if LINEAR_AXES >= 5 && !defined(DEFAULT_JJERK)
#define DEFAULT_JJERK 0
#endif
#if LINEAR_AXES >= 6 && !defined(DEFAULT_KJERK)
#define DEFAULT_KJERK 0
#endif
planner.max_jerk.set(
LINEAR_AXIS_LIST(DEFAULT_XJERK, DEFAULT_YJERK, DEFAULT_ZJERK, DEFAULT_IJERK, DEFAULT_JJERK, DEFAULT_KJERK)
);
TERN_(HAS_CLASSIC_E_JERK, planner.max_jerk.e = DEFAULT_EJERK);
#endif
#if HAS_JUNCTION_DEVIATION
planner.junction_deviation_mm = float(JUNCTION_DEVIATION_MM);
#endif
#if HAS_SCARA_OFFSET
scara_home_offset.reset();
#elif HAS_HOME_OFFSET
home_offset.reset();
#endif
TERN_(HAS_HOTEND_OFFSET, reset_hotend_offsets());
//
// Filament Runout Sensor
//
#if HAS_FILAMENT_SENSOR
runout.enabled = FIL_RUNOUT_ENABLED_DEFAULT;
runout.reset();
TERN_(HAS_FILAMENT_RUNOUT_DISTANCE, runout.set_runout_distance(FILAMENT_RUNOUT_DISTANCE_MM));
#endif
//
// Tool-change Settings
//
#if HAS_MULTI_EXTRUDER
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
toolchange_settings.swap_length = TOOLCHANGE_FS_LENGTH;
toolchange_settings.extra_resume = TOOLCHANGE_FS_EXTRA_RESUME_LENGTH;
toolchange_settings.retract_speed = TOOLCHANGE_FS_RETRACT_SPEED;
toolchange_settings.unretract_speed = TOOLCHANGE_FS_UNRETRACT_SPEED;
toolchange_settings.extra_prime = TOOLCHANGE_FS_EXTRA_PRIME;
toolchange_settings.prime_speed = TOOLCHANGE_FS_PRIME_SPEED;
toolchange_settings.fan_speed = TOOLCHANGE_FS_FAN_SPEED;
toolchange_settings.fan_time = TOOLCHANGE_FS_FAN_TIME;
#endif
#if ENABLED(TOOLCHANGE_FS_PRIME_FIRST_USED)
enable_first_prime = false;
#endif
#if ENABLED(TOOLCHANGE_PARK)
constexpr xyz_pos_t tpxy = TOOLCHANGE_PARK_XY;
toolchange_settings.enable_park = true;
toolchange_settings.change_point = tpxy;
#endif
toolchange_settings.z_raise = TOOLCHANGE_ZRAISE;
#if ENABLED(TOOLCHANGE_MIGRATION_FEATURE)
migration = migration_defaults;
#endif
#endif
#if ENABLED(BACKLASH_GCODE)
backlash.correction = (BACKLASH_CORRECTION) * 255;
constexpr xyz_float_t tmp = BACKLASH_DISTANCE_MM;
backlash.distance_mm = tmp;
#ifdef BACKLASH_SMOOTHING_MM
backlash.smoothing_mm = BACKLASH_SMOOTHING_MM;
#endif
#endif
TERN_(EXTENSIBLE_UI, ExtUI::onFactoryReset());
//
// Case Light Brightness
//
TERN_(CASELIGHT_USES_BRIGHTNESS, caselight.brightness = CASE_LIGHT_DEFAULT_BRIGHTNESS);
//
// TOUCH_SCREEN_CALIBRATION
//
TERN_(TOUCH_SCREEN_CALIBRATION, touch_calibration.calibration_reset());
//
// Buzzer enable/disable
//
TERN_(SOUND_MENU_ITEM, ui.buzzer_enabled = true);
//
// Magnetic Parking Extruder
//
TERN_(MAGNETIC_PARKING_EXTRUDER, mpe_settings_init());
//
// Global Leveling
//
TERN_(ENABLE_LEVELING_FADE_HEIGHT, new_z_fade_height = (DEFAULT_LEVELING_FADE_HEIGHT));
TERN_(HAS_LEVELING, reset_bed_level());
#if HAS_BED_PROBE
constexpr float dpo[] = NOZZLE_TO_PROBE_OFFSET;
static_assert(COUNT(dpo) == LINEAR_AXES, "NOZZLE_TO_PROBE_OFFSET must contain offsets for each linear axis X, Y, Z....");
#if HAS_PROBE_XY_OFFSET
LOOP_LINEAR_AXES(a) probe.offset[a] = dpo[a];
#else
probe.offset.set(LINEAR_AXIS_LIST(0, 0, dpo[Z_AXIS], 0, 0, 0));
#endif
#endif
//
// Z Stepper Auto-alignment points
//
TERN_(Z_STEPPER_AUTO_ALIGN, z_stepper_align.reset_to_default());
//
// Servo Angles
//
TERN_(EDITABLE_SERVO_ANGLES, COPY(servo_angles, base_servo_angles)); // When not editable only one copy of servo angles exists
//
// BLTOUCH
//
//#if ENABLED(BLTOUCH)
// bltouch.last_written_mode;
//#endif
//
// Endstop Adjustments
//
#if ENABLED(DELTA)
const abc_float_t adj = DELTA_ENDSTOP_ADJ, dta = DELTA_TOWER_ANGLE_TRIM, ddr = DELTA_DIAGONAL_ROD_TRIM_TOWER;
delta_height = DELTA_HEIGHT;
delta_endstop_adj = adj;
delta_radius = DELTA_RADIUS;
delta_diagonal_rod = DELTA_DIAGONAL_ROD;
segments_per_second = DELTA_SEGMENTS_PER_SECOND;
delta_tower_angle_trim = dta;
delta_diagonal_rod_trim = ddr;
#endif
#if ENABLED(X_DUAL_ENDSTOPS)
#ifndef X2_ENDSTOP_ADJUSTMENT
#define X2_ENDSTOP_ADJUSTMENT 0
#endif
endstops.x2_endstop_adj = X2_ENDSTOP_ADJUSTMENT;
#endif
#if ENABLED(Y_DUAL_ENDSTOPS)
#ifndef Y2_ENDSTOP_ADJUSTMENT
#define Y2_ENDSTOP_ADJUSTMENT 0
#endif
endstops.y2_endstop_adj = Y2_ENDSTOP_ADJUSTMENT;
#endif
#if ENABLED(Z_MULTI_ENDSTOPS)
#ifndef Z2_ENDSTOP_ADJUSTMENT
#define Z2_ENDSTOP_ADJUSTMENT 0
#endif
endstops.z2_endstop_adj = Z2_ENDSTOP_ADJUSTMENT;
#if NUM_Z_STEPPER_DRIVERS >= 3
#ifndef Z3_ENDSTOP_ADJUSTMENT
#define Z3_ENDSTOP_ADJUSTMENT 0
#endif
endstops.z3_endstop_adj = Z3_ENDSTOP_ADJUSTMENT;
#endif
#if NUM_Z_STEPPER_DRIVERS >= 4
#ifndef Z4_ENDSTOP_ADJUSTMENT
#define Z4_ENDSTOP_ADJUSTMENT 0
#endif
endstops.z4_endstop_adj = Z4_ENDSTOP_ADJUSTMENT;
#endif
#endif
//
// Preheat parameters
//
#if PREHEAT_COUNT
#define _PITEM(N,T) PREHEAT_##N##_##T,
#if HAS_HOTEND
constexpr uint16_t hpre[] = { REPEAT2_S(1, INCREMENT(PREHEAT_COUNT), _PITEM, TEMP_HOTEND) };
#endif
#if HAS_HEATED_BED
constexpr uint16_t bpre[] = { REPEAT2_S(1, INCREMENT(PREHEAT_COUNT), _PITEM, TEMP_BED) };
#endif
#if HAS_FAN
constexpr uint8_t fpre[] = { REPEAT2_S(1, INCREMENT(PREHEAT_COUNT), _PITEM, FAN_SPEED) };
#endif
LOOP_L_N(i, PREHEAT_COUNT) {
TERN_(HAS_HOTEND, ui.material_preset[i].hotend_temp = hpre[i]);
TERN_(HAS_HEATED_BED, ui.material_preset[i].bed_temp = bpre[i]);
TERN_(HAS_FAN, ui.material_preset[i].fan_speed = fpre[i]);
}
#endif
//
// Hotend PID
//
#if ENABLED(PIDTEMP)
#if ENABLED(PID_PARAMS_PER_HOTEND)
constexpr float defKp[] =
#ifdef DEFAULT_Kp_LIST
DEFAULT_Kp_LIST
#else
ARRAY_BY_HOTENDS1(DEFAULT_Kp)
#endif
, defKi[] =
#ifdef DEFAULT_Ki_LIST
DEFAULT_Ki_LIST
#else
ARRAY_BY_HOTENDS1(DEFAULT_Ki)
#endif
, defKd[] =
#ifdef DEFAULT_Kd_LIST
DEFAULT_Kd_LIST
#else
ARRAY_BY_HOTENDS1(DEFAULT_Kd)
#endif
;
static_assert(WITHIN(COUNT(defKp), 1, HOTENDS), "DEFAULT_Kp_LIST must have between 1 and HOTENDS items.");
static_assert(WITHIN(COUNT(defKi), 1, HOTENDS), "DEFAULT_Ki_LIST must have between 1 and HOTENDS items.");
static_assert(WITHIN(COUNT(defKd), 1, HOTENDS), "DEFAULT_Kd_LIST must have between 1 and HOTENDS items.");
#if ENABLED(PID_EXTRUSION_SCALING)
constexpr float defKc[] =
#ifdef DEFAULT_Kc_LIST
DEFAULT_Kc_LIST
#else
ARRAY_BY_HOTENDS1(DEFAULT_Kc)
#endif
;
static_assert(WITHIN(COUNT(defKc), 1, HOTENDS), "DEFAULT_Kc_LIST must have between 1 and HOTENDS items.");
#endif
#if ENABLED(PID_FAN_SCALING)
constexpr float defKf[] =
#ifdef DEFAULT_Kf_LIST
DEFAULT_Kf_LIST
#else
ARRAY_BY_HOTENDS1(DEFAULT_Kf)
#endif
;
static_assert(WITHIN(COUNT(defKf), 1, HOTENDS), "DEFAULT_Kf_LIST must have between 1 and HOTENDS items.");
#endif
#define PID_DEFAULT(N,E) def##N[E]
#else
#define PID_DEFAULT(N,E) DEFAULT_##N
#endif
HOTEND_LOOP() {
PID_PARAM(Kp, e) = float(PID_DEFAULT(Kp, ALIM(e, defKp)));
PID_PARAM(Ki, e) = scalePID_i(PID_DEFAULT(Ki, ALIM(e, defKi)));
PID_PARAM(Kd, e) = scalePID_d(PID_DEFAULT(Kd, ALIM(e, defKd)));
TERN_(PID_EXTRUSION_SCALING, PID_PARAM(Kc, e) = float(PID_DEFAULT(Kc, ALIM(e, defKc))));
TERN_(PID_FAN_SCALING, PID_PARAM(Kf, e) = float(PID_DEFAULT(Kf, ALIM(e, defKf))));
}
#endif
//
// PID Extrusion Scaling
//
TERN_(PID_EXTRUSION_SCALING, thermalManager.lpq_len = 20); // Default last-position-queue size
//
// Heated Bed PID
//
#if ENABLED(PIDTEMPBED)
thermalManager.temp_bed.pid.Kp = DEFAULT_bedKp;
thermalManager.temp_bed.pid.Ki = scalePID_i(DEFAULT_bedKi);
thermalManager.temp_bed.pid.Kd = scalePID_d(DEFAULT_bedKd);
#endif
//
// Heated Chamber PID
//
#if ENABLED(PIDTEMPCHAMBER)
thermalManager.temp_chamber.pid.Kp = DEFAULT_chamberKp;
thermalManager.temp_chamber.pid.Ki = scalePID_i(DEFAULT_chamberKi);
thermalManager.temp_chamber.pid.Kd = scalePID_d(DEFAULT_chamberKd);
#endif
//
// User-Defined Thermistors
//
TERN_(HAS_USER_THERMISTORS, thermalManager.reset_user_thermistors());
//
// Power Monitor
//
TERN_(POWER_MONITOR, power_monitor.reset());
//
// LCD Contrast
//
TERN_(HAS_LCD_CONTRAST, ui.set_contrast(DEFAULT_LCD_CONTRAST));
//
// LCD Brightness
//
TERN_(HAS_LCD_BRIGHTNESS, ui.set_brightness(DEFAULT_LCD_BRIGHTNESS));
//
// Controller Fan
//
TERN_(USE_CONTROLLER_FAN, controllerFan.reset());
//
// Power-Loss Recovery
//
TERN_(POWER_LOSS_RECOVERY, recovery.enable(ENABLED(PLR_ENABLED_DEFAULT)));
//
// Firmware Retraction
//
TERN_(FWRETRACT, fwretract.reset());
//
// Volumetric & Filament Size
//
#if DISABLED(NO_VOLUMETRICS)
parser.volumetric_enabled = ENABLED(VOLUMETRIC_DEFAULT_ON);
LOOP_L_N(q, COUNT(planner.filament_size))
planner.filament_size[q] = DEFAULT_NOMINAL_FILAMENT_DIA;
#if ENABLED(VOLUMETRIC_EXTRUDER_LIMIT)
LOOP_L_N(q, COUNT(planner.volumetric_extruder_limit))
planner.volumetric_extruder_limit[q] = DEFAULT_VOLUMETRIC_EXTRUDER_LIMIT;
#endif
#endif
endstops.enable_globally(ENABLED(ENDSTOPS_ALWAYS_ON_DEFAULT));
reset_stepper_drivers();
//
// Linear Advance
//
#if ENABLED(LIN_ADVANCE)
LOOP_L_N(i, EXTRUDERS) {
planner.extruder_advance_K[i] = LIN_ADVANCE_K;
TERN_(EXTRA_LIN_ADVANCE_K, other_extruder_advance_K[i] = LIN_ADVANCE_K);
}
#endif
//
// Motor Current PWM
//
#if HAS_MOTOR_CURRENT_PWM
constexpr uint32_t tmp_motor_current_setting[MOTOR_CURRENT_COUNT] = PWM_MOTOR_CURRENT;
LOOP_L_N(q, MOTOR_CURRENT_COUNT)
stepper.set_digipot_current(q, (stepper.motor_current_setting[q] = tmp_motor_current_setting[q]));
#endif
//
// DIGIPOTS
//
#if HAS_MOTOR_CURRENT_SPI
static constexpr uint32_t tmp_motor_current_setting[] = DIGIPOT_MOTOR_CURRENT;
DEBUG_ECHOLNPGM("Writing Digipot");
LOOP_L_N(q, COUNT(tmp_motor_current_setting))
stepper.set_digipot_current(q, tmp_motor_current_setting[q]);
DEBUG_ECHOLNPGM("Digipot Written");
#endif
//
// CNC Coordinate System
//
TERN_(CNC_COORDINATE_SYSTEMS, (void)gcode.select_coordinate_system(-1)); // Go back to machine space
//
// Skew Correction
//
#if ENABLED(SKEW_CORRECTION_GCODE)
planner.skew_factor.xy = XY_SKEW_FACTOR;
#if ENABLED(SKEW_CORRECTION_FOR_Z)
planner.skew_factor.xz = XZ_SKEW_FACTOR;
planner.skew_factor.yz = YZ_SKEW_FACTOR;
#endif
#endif
//
// Advanced Pause filament load & unload lengths
//
#if ENABLED(ADVANCED_PAUSE_FEATURE)
LOOP_L_N(e, EXTRUDERS) {
fc_settings[e].unload_length = FILAMENT_CHANGE_UNLOAD_LENGTH;
fc_settings[e].load_length = FILAMENT_CHANGE_FAST_LOAD_LENGTH;
}
#endif
#if ENABLED(PASSWORD_FEATURE)
#ifdef PASSWORD_DEFAULT_VALUE
password.is_set = true;
password.value = PASSWORD_DEFAULT_VALUE;
#else
password.is_set = false;
#endif
#endif
//
// MKS UI controller
//
TERN_(DGUS_LCD_UI_MKS, MKS_reset_settings());
postprocess();
DEBUG_ECHO_START();
DEBUG_ECHOLNPGM("Hardcoded Default Settings Loaded");
TERN_(EXTENSIBLE_UI, ExtUI::onFactoryReset());
}
#if DISABLED(DISABLE_M503)
static void config_heading(const bool repl, PGM_P const pstr, const bool eol=true) {
if (!repl) {
SERIAL_ECHO_START();
SERIAL_ECHOPGM("; ");
SERIAL_ECHOPGM_P(pstr);
if (eol) SERIAL_EOL();
}
}
#define CONFIG_ECHO_START() do{ if (!forReplay) SERIAL_ECHO_START(); }while(0)
#define CONFIG_ECHO_MSG(V...) do{ CONFIG_ECHO_START(); SERIAL_ECHOLNPAIR(V); }while(0)
#define CONFIG_ECHO_HEADING(STR) config_heading(forReplay, PSTR(STR))
#if HAS_TRINAMIC_CONFIG
inline void say_M906(const bool forReplay) { CONFIG_ECHO_START(); SERIAL_ECHOPGM(" M906"); }
#if HAS_STEALTHCHOP
void say_M569(const bool forReplay, const char * const etc=nullptr, const bool newLine = false) {
CONFIG_ECHO_START();
SERIAL_ECHOPGM(" M569 S1");
if (etc) {
SERIAL_CHAR(' ');
SERIAL_ECHOPGM_P(etc);
}
if (newLine) SERIAL_EOL();
}
#endif
#if ENABLED(HYBRID_THRESHOLD)
inline void say_M913(const bool forReplay) { CONFIG_ECHO_START(); SERIAL_ECHOPGM(" M913"); }
#endif
#if USE_SENSORLESS
inline void say_M914() { SERIAL_ECHOPGM(" M914"); }
#endif
#endif
#if ENABLED(ADVANCED_PAUSE_FEATURE)
inline void say_M603(const bool forReplay) { CONFIG_ECHO_START(); SERIAL_ECHOPGM(" M603 "); }
#endif
inline void say_units(const bool colon) {
SERIAL_ECHOPGM_P(
#if ENABLED(INCH_MODE_SUPPORT)
parser.linear_unit_factor != 1.0 ? PSTR(" (in)") :
#endif
PSTR(" (mm)")
);
if (colon) SERIAL_ECHOLNPGM(":");
}
void report_M92(const bool echo=true, const int8_t e=-1);
/**
* M503 - Report current settings in RAM
*
* Unless specifically disabled, M503 is available even without EEPROM
*/
void MarlinSettings::report(const bool forReplay) {
/**
* Announce current units, in case inches are being displayed
*/
CONFIG_ECHO_START();
#if ENABLED(INCH_MODE_SUPPORT)
SERIAL_ECHOPGM(" G2");
SERIAL_CHAR(parser.linear_unit_factor == 1.0 ? '1' : '0');
SERIAL_ECHOPGM(" ;");
say_units(false);
#else
SERIAL_ECHOPGM(" G21 ; Units in mm");
say_units(false);
#endif
SERIAL_EOL();
#if HAS_LCD_MENU
// Temperature units - for Ultipanel temperature options
CONFIG_ECHO_START();
#if ENABLED(TEMPERATURE_UNITS_SUPPORT)
SERIAL_ECHOPGM(" M149 ");
SERIAL_CHAR(parser.temp_units_code());
SERIAL_ECHOPGM(" ; Units in ");
SERIAL_ECHOPGM_P(parser.temp_units_name());
#else
SERIAL_ECHOLNPGM(" M149 C ; Units in Celsius");
#endif
#endif
SERIAL_EOL();
#if EXTRUDERS && DISABLED(NO_VOLUMETRICS)
/**
* Volumetric extrusion M200
*/
if (!forReplay) {
config_heading(forReplay, PSTR("Filament settings:"), false);
if (parser.volumetric_enabled)
SERIAL_EOL();
else
SERIAL_ECHOLNPGM(" Disabled");
}
#if EXTRUDERS == 1
CONFIG_ECHO_MSG(" M200 S", parser.volumetric_enabled
, " D", LINEAR_UNIT(planner.filament_size[0])
#if ENABLED(VOLUMETRIC_EXTRUDER_LIMIT)
, " L", LINEAR_UNIT(planner.volumetric_extruder_limit[0])
#endif
);
#else
LOOP_L_N(i, EXTRUDERS) {
CONFIG_ECHO_MSG(" M200 T", i
, " D", LINEAR_UNIT(planner.filament_size[i])
#if ENABLED(VOLUMETRIC_EXTRUDER_LIMIT)
, " L", LINEAR_UNIT(planner.volumetric_extruder_limit[i])
#endif
);
}
CONFIG_ECHO_MSG(" M200 S", parser.volumetric_enabled);
#endif
#endif // EXTRUDERS && !NO_VOLUMETRICS
CONFIG_ECHO_HEADING("Steps per unit:");
report_M92(!forReplay);
CONFIG_ECHO_HEADING("Maximum feedrates (units/s):");
CONFIG_ECHO_START();
SERIAL_ECHOLNPAIR_P(
LIST_N(DOUBLE(LINEAR_AXES),
PSTR(" M203 X"), LINEAR_UNIT(planner.settings.max_feedrate_mm_s[X_AXIS]),
SP_Y_STR, LINEAR_UNIT(planner.settings.max_feedrate_mm_s[Y_AXIS]),
SP_Z_STR, LINEAR_UNIT(planner.settings.max_feedrate_mm_s[Z_AXIS]),
SP_I_STR, LINEAR_UNIT(planner.settings.max_feedrate_mm_s[I_AXIS]),
SP_J_STR, LINEAR_UNIT(planner.settings.max_feedrate_mm_s[J_AXIS]),
SP_K_STR, LINEAR_UNIT(planner.settings.max_feedrate_mm_s[K_AXIS])
)
#if HAS_EXTRUDERS && DISABLED(DISTINCT_E_FACTORS)
, SP_E_STR, VOLUMETRIC_UNIT(planner.settings.max_feedrate_mm_s[E_AXIS])
#endif
);
#if ENABLED(DISTINCT_E_FACTORS)
LOOP_L_N(i, E_STEPPERS) {
CONFIG_ECHO_START();
SERIAL_ECHOLNPAIR_P(
PSTR(" M203 T"), i
, SP_E_STR, VOLUMETRIC_UNIT(planner.settings.max_feedrate_mm_s[E_AXIS_N(i)])
);
}
#endif
CONFIG_ECHO_HEADING("Maximum Acceleration (units/s2):");
CONFIG_ECHO_START();
SERIAL_ECHOLNPAIR_P(
LIST_N(DOUBLE(LINEAR_AXES),
PSTR(" M201 X"), LINEAR_UNIT(planner.settings.max_acceleration_mm_per_s2[X_AXIS]),
SP_Y_STR, LINEAR_UNIT(planner.settings.max_acceleration_mm_per_s2[Y_AXIS]),
SP_Z_STR, LINEAR_UNIT(planner.settings.max_acceleration_mm_per_s2[Z_AXIS]),
SP_I_STR, LINEAR_UNIT(planner.settings.max_acceleration_mm_per_s2[I_AXIS]),
SP_J_STR, LINEAR_UNIT(planner.settings.max_acceleration_mm_per_s2[J_AXIS]),
SP_K_STR, LINEAR_UNIT(planner.settings.max_acceleration_mm_per_s2[K_AXIS])
)
#if HAS_EXTRUDERS && DISABLED(DISTINCT_E_FACTORS)
, SP_E_STR, VOLUMETRIC_UNIT(planner.settings.max_acceleration_mm_per_s2[E_AXIS])
#endif
);
#if ENABLED(DISTINCT_E_FACTORS)
LOOP_L_N(i, E_STEPPERS) {
CONFIG_ECHO_START();
SERIAL_ECHOLNPAIR_P(
PSTR(" M201 T"), i
, SP_E_STR, VOLUMETRIC_UNIT(planner.settings.max_acceleration_mm_per_s2[E_AXIS_N(i)])
);
}
#endif
CONFIG_ECHO_HEADING("Acceleration (units/s2): P R T");
CONFIG_ECHO_START();
SERIAL_ECHOLNPAIR_P(
PSTR(" M204 P"), LINEAR_UNIT(planner.settings.acceleration)
, PSTR(" R"), LINEAR_UNIT(planner.settings.retract_acceleration)
, SP_T_STR, LINEAR_UNIT(planner.settings.travel_acceleration)
);
CONFIG_ECHO_HEADING(
"Advanced: B S T"
#if HAS_JUNCTION_DEVIATION
" J"
#endif
#if HAS_CLASSIC_JERK
" X Y Z"
TERN_(HAS_CLASSIC_E_JERK, " E")
#endif
);
CONFIG_ECHO_START();
SERIAL_ECHOLNPAIR_P(
PSTR(" M205 B"), LINEAR_UNIT(planner.settings.min_segment_time_us)
, PSTR(" S"), LINEAR_UNIT(planner.settings.min_feedrate_mm_s)
, SP_T_STR, LINEAR_UNIT(planner.settings.min_travel_feedrate_mm_s)
#if HAS_JUNCTION_DEVIATION
, PSTR(" J"), LINEAR_UNIT(planner.junction_deviation_mm)
#endif
#if HAS_CLASSIC_JERK
, LIST_N(DOUBLE(LINEAR_AXES),
SP_X_STR, LINEAR_UNIT(planner.max_jerk.x),
SP_Y_STR, LINEAR_UNIT(planner.max_jerk.y),
SP_Z_STR, LINEAR_UNIT(planner.max_jerk.z),
SP_I_STR, LINEAR_UNIT(planner.max_jerk.i),
SP_J_STR, LINEAR_UNIT(planner.max_jerk.j),
SP_K_STR, LINEAR_UNIT(planner.max_jerk.k)
)
#if HAS_CLASSIC_E_JERK
, SP_E_STR, LINEAR_UNIT(planner.max_jerk.e)
#endif
#endif
);
#if HAS_M206_COMMAND
CONFIG_ECHO_HEADING("Home offset:");
CONFIG_ECHO_START();
SERIAL_ECHOLNPAIR_P(
#if IS_CARTESIAN
LIST_N(DOUBLE(LINEAR_AXES),
PSTR(" M206 X"), LINEAR_UNIT(home_offset.x),
SP_Y_STR, LINEAR_UNIT(home_offset.y),
SP_Z_STR, LINEAR_UNIT(home_offset.z),
SP_I_STR, LINEAR_UNIT(home_offset.i),
SP_J_STR, LINEAR_UNIT(home_offset.j),
SP_K_STR, LINEAR_UNIT(home_offset.k)
)
#else
PSTR(" M206 Z"), LINEAR_UNIT(home_offset.z)
#endif
);
#endif
#if HAS_HOTEND_OFFSET
CONFIG_ECHO_HEADING("Hotend offsets:");
CONFIG_ECHO_START();
LOOP_S_L_N(e, 1, HOTENDS) {
SERIAL_ECHOPAIR_P(
PSTR(" M218 T"), e,
SP_X_STR, LINEAR_UNIT(hotend_offset[e].x),
SP_Y_STR, LINEAR_UNIT(hotend_offset[e].y)
);
SERIAL_ECHOLNPAIR_F_P(SP_Z_STR, LINEAR_UNIT(hotend_offset[e].z), 3);
}
#endif
/**
* Bed Leveling
*/
#if HAS_LEVELING
#if ENABLED(MESH_BED_LEVELING)
CONFIG_ECHO_HEADING("Mesh Bed Leveling:");
#elif ENABLED(AUTO_BED_LEVELING_UBL)
config_heading(forReplay, NUL_STR, false);
if (!forReplay) {
ubl.echo_name();
SERIAL_CHAR(':');
SERIAL_EOL();
}
#elif HAS_ABL_OR_UBL
CONFIG_ECHO_HEADING("Auto Bed Leveling:");
#endif
CONFIG_ECHO_START();
SERIAL_ECHOLNPAIR_P(
PSTR(" M420 S"), planner.leveling_active
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
, SP_Z_STR, LINEAR_UNIT(planner.z_fade_height)
#endif
);
#if ENABLED(MESH_BED_LEVELING)
if (leveling_is_valid()) {
LOOP_L_N(py, GRID_MAX_POINTS_Y) {
LOOP_L_N(px, GRID_MAX_POINTS_X) {
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" G29 S3 I", px, " J", py);
SERIAL_ECHOLNPAIR_F_P(SP_Z_STR, LINEAR_UNIT(mbl.z_values[px][py]), 5);
}
}
CONFIG_ECHO_START();
SERIAL_ECHOLNPAIR_F(" G29 S4 Z", LINEAR_UNIT(mbl.z_offset), 5);
}
#elif ENABLED(AUTO_BED_LEVELING_UBL)
if (!forReplay) {
SERIAL_EOL();
ubl.report_state();
SERIAL_EOL();
config_heading(false, PSTR("Active Mesh Slot: "), false);
SERIAL_ECHOLN(ubl.storage_slot);
config_heading(false, PSTR("EEPROM can hold "), false);
SERIAL_ECHO(calc_num_meshes());
SERIAL_ECHOLNPGM(" meshes.\n");
}
//ubl.report_current_mesh(); // This is too verbose for large meshes. A better (more terse)
// solution needs to be found.
#elif ENABLED(AUTO_BED_LEVELING_BILINEAR)
if (leveling_is_valid()) {
LOOP_L_N(py, GRID_MAX_POINTS_Y) {
LOOP_L_N(px, GRID_MAX_POINTS_X) {
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" G29 W I", px, " J", py);
SERIAL_ECHOLNPAIR_F_P(SP_Z_STR, LINEAR_UNIT(z_values[px][py]), 5);
}
}
}
#endif
#endif // HAS_LEVELING
#if ENABLED(EDITABLE_SERVO_ANGLES)
CONFIG_ECHO_HEADING("Servo Angles:");
LOOP_L_N(i, NUM_SERVOS) {
switch (i) {
#if ENABLED(SWITCHING_EXTRUDER)
case SWITCHING_EXTRUDER_SERVO_NR:
#if EXTRUDERS > 3
case SWITCHING_EXTRUDER_E23_SERVO_NR:
#endif
#elif ENABLED(SWITCHING_NOZZLE)
case SWITCHING_NOZZLE_SERVO_NR:
#elif ENABLED(BLTOUCH) || (HAS_Z_SERVO_PROBE && defined(Z_SERVO_ANGLES))
case Z_PROBE_SERVO_NR:
#endif
CONFIG_ECHO_MSG(" M281 P", i, " L", servo_angles[i][0], " U", servo_angles[i][1]);
default: break;
}
}
#endif // EDITABLE_SERVO_ANGLES
#if HAS_SCARA_OFFSET
CONFIG_ECHO_HEADING("SCARA settings: S P T");
CONFIG_ECHO_START();
SERIAL_ECHOLNPAIR_P(
PSTR(" M665 S"), segments_per_second
, SP_P_STR, scara_home_offset.a
, SP_T_STR, scara_home_offset.b
, SP_Z_STR, LINEAR_UNIT(scara_home_offset.z)
);
#elif ENABLED(DELTA)
CONFIG_ECHO_HEADING("Delta settings: L R H S XYZ ABC");
CONFIG_ECHO_START();
SERIAL_ECHOLNPAIR_P(
PSTR(" M665 L"), LINEAR_UNIT(delta_diagonal_rod)
, PSTR(" R"), LINEAR_UNIT(delta_radius)
, PSTR(" H"), LINEAR_UNIT(delta_height)
, PSTR(" S"), segments_per_second
, SP_X_STR, LINEAR_UNIT(delta_tower_angle_trim.a)
, SP_Y_STR, LINEAR_UNIT(delta_tower_angle_trim.b)
, SP_Z_STR, LINEAR_UNIT(delta_tower_angle_trim.c)
, PSTR(" A"), LINEAR_UNIT(delta_diagonal_rod_trim.a)
, PSTR(" B"), LINEAR_UNIT(delta_diagonal_rod_trim.b)
, PSTR(" C"), LINEAR_UNIT(delta_diagonal_rod_trim.c)
);
#endif
#if EITHER(DELTA, HAS_EXTRA_ENDSTOPS)
M666_report(forReplay);
#endif
#if PREHEAT_COUNT
CONFIG_ECHO_HEADING("Material heatup parameters:");
LOOP_L_N(i, PREHEAT_COUNT) {
CONFIG_ECHO_START();
SERIAL_ECHOLNPAIR_P(
PSTR(" M145 S"), i
#if HAS_HOTEND
, PSTR(" H"), parser.to_temp_units(ui.material_preset[i].hotend_temp)
#endif
#if HAS_HEATED_BED
, SP_B_STR, parser.to_temp_units(ui.material_preset[i].bed_temp)
#endif
#if HAS_FAN
, PSTR(" F"), ui.material_preset[i].fan_speed
#endif
);
}
#endif
#if HAS_PID_HEATING
CONFIG_ECHO_HEADING("PID settings:");
#if ENABLED(PIDTEMP)
HOTEND_LOOP() {
CONFIG_ECHO_START();
SERIAL_ECHOPAIR_P(
#if ENABLED(PID_PARAMS_PER_HOTEND)
PSTR(" M301 E"), e,
SP_P_STR
#else
PSTR(" M301 P")
#endif
, PID_PARAM(Kp, e)
, PSTR(" I"), unscalePID_i(PID_PARAM(Ki, e))
, PSTR(" D"), unscalePID_d(PID_PARAM(Kd, e))
);
#if ENABLED(PID_EXTRUSION_SCALING)
SERIAL_ECHOPAIR_P(SP_C_STR, PID_PARAM(Kc, e));
if (e == 0) SERIAL_ECHOPAIR(" L", thermalManager.lpq_len);
#endif
#if ENABLED(PID_FAN_SCALING)
SERIAL_ECHOPAIR(" F", PID_PARAM(Kf, e));
#endif
SERIAL_EOL();
}
#endif // PIDTEMP
#if ENABLED(PIDTEMPBED)
CONFIG_ECHO_MSG(
" M304 P", thermalManager.temp_bed.pid.Kp
, " I", unscalePID_i(thermalManager.temp_bed.pid.Ki)
, " D", unscalePID_d(thermalManager.temp_bed.pid.Kd)
);
#endif
#if ENABLED(PIDTEMPCHAMBER)
CONFIG_ECHO_START();
SERIAL_ECHOLNPAIR(
" M309 P", thermalManager.temp_chamber.pid.Kp
, " I", unscalePID_i(thermalManager.temp_chamber.pid.Ki)
, " D", unscalePID_d(thermalManager.temp_chamber.pid.Kd)
);
#endif
#endif // PIDTEMP || PIDTEMPBED || PIDTEMPCHAMBER
#if HAS_USER_THERMISTORS
CONFIG_ECHO_HEADING("User thermistors:");
LOOP_L_N(i, USER_THERMISTORS)
thermalManager.log_user_thermistor(i, true);
#endif
#if HAS_LCD_CONTRAST
CONFIG_ECHO_HEADING("LCD Contrast:");
CONFIG_ECHO_MSG(" M250 C", ui.contrast);
#endif
#if HAS_LCD_BRIGHTNESS
CONFIG_ECHO_HEADING("LCD Brightness:");
CONFIG_ECHO_MSG(" M256 B", ui.brightness);
#endif
TERN_(CONTROLLER_FAN_EDITABLE, M710_report(forReplay));
#if ENABLED(POWER_LOSS_RECOVERY)
CONFIG_ECHO_HEADING("Power-Loss Recovery:");
CONFIG_ECHO_MSG(" M413 S", recovery.enabled);
#endif
#if ENABLED(FWRETRACT)
fwretract.M207_report(forReplay);
fwretract.M208_report(forReplay);
TERN_(FWRETRACT_AUTORETRACT, fwretract.M209_report(forReplay));
#endif
/**
* Probe Offset
*/
#if HAS_BED_PROBE
config_heading(forReplay, PSTR("Z-Probe Offset"), false);
if (!forReplay) say_units(true);
CONFIG_ECHO_START();
SERIAL_ECHOLNPAIR_P(
#if HAS_PROBE_XY_OFFSET
PSTR(" M851 X"), LINEAR_UNIT(probe.offset_xy.x),
SP_Y_STR, LINEAR_UNIT(probe.offset_xy.y),
SP_Z_STR
#else
PSTR(" M851 X0 Y0 Z")
#endif
, LINEAR_UNIT(probe.offset.z)
);
#endif
/**
* Bed Skew Correction
*/
#if ENABLED(SKEW_CORRECTION_GCODE)
CONFIG_ECHO_HEADING("Skew Factor: ");
CONFIG_ECHO_START();
#if ENABLED(SKEW_CORRECTION_FOR_Z)
SERIAL_ECHOPAIR_F(" M852 I", LINEAR_UNIT(planner.skew_factor.xy), 6);
SERIAL_ECHOPAIR_F(" J", LINEAR_UNIT(planner.skew_factor.xz), 6);
SERIAL_ECHOLNPAIR_F(" K", LINEAR_UNIT(planner.skew_factor.yz), 6);
#else
SERIAL_ECHOLNPAIR_F(" M852 S", LINEAR_UNIT(planner.skew_factor.xy), 6);
#endif
#endif
#if HAS_TRINAMIC_CONFIG
/**
* TMC stepper driver current
*/
CONFIG_ECHO_HEADING("Stepper driver current:");
#if AXIS_IS_TMC(X) || AXIS_IS_TMC(Y) || AXIS_IS_TMC(Z)
say_M906(forReplay);
#if AXIS_IS_TMC(X)
SERIAL_ECHOPAIR_P(SP_X_STR, stepperX.getMilliamps());
#endif
#if AXIS_IS_TMC(Y)
SERIAL_ECHOPAIR_P(SP_Y_STR, stepperY.getMilliamps());
#endif
#if AXIS_IS_TMC(Z)
SERIAL_ECHOPAIR_P(SP_Z_STR, stepperZ.getMilliamps());
#endif
SERIAL_EOL();
#endif
#if AXIS_IS_TMC(X2) || AXIS_IS_TMC(Y2) || AXIS_IS_TMC(Z2)
say_M906(forReplay);
SERIAL_ECHOPGM(" I1");
#if AXIS_IS_TMC(X2)
SERIAL_ECHOPAIR_P(SP_X_STR, stepperX2.getMilliamps());
#endif
#if AXIS_IS_TMC(Y2)
SERIAL_ECHOPAIR_P(SP_Y_STR, stepperY2.getMilliamps());
#endif
#if AXIS_IS_TMC(Z2)
SERIAL_ECHOPAIR_P(SP_Z_STR, stepperZ2.getMilliamps());
#endif
SERIAL_EOL();
#endif
#if AXIS_IS_TMC(Z3)
say_M906(forReplay);
SERIAL_ECHOLNPAIR(" I2 Z", stepperZ3.getMilliamps());
#endif
#if AXIS_IS_TMC(Z4)
say_M906(forReplay);
SERIAL_ECHOLNPAIR(" I3 Z", stepperZ4.getMilliamps());
#endif
#if AXIS_IS_TMC(I)
say_M906(forReplay);
SERIAL_ECHOLNPAIR_P(SP_I_STR, stepperI.getMilliamps());
#endif
#if AXIS_IS_TMC(J)
say_M906(forReplay);
SERIAL_ECHOLNPAIR_P(SP_J_STR, stepperJ.getMilliamps());
#endif
#if AXIS_IS_TMC(K)
say_M906(forReplay);
SERIAL_ECHOLNPAIR_P(SP_K_STR, stepperK.getMilliamps());
#endif
#if AXIS_IS_TMC(E0)
say_M906(forReplay);
SERIAL_ECHOLNPAIR(" T0 E", stepperE0.getMilliamps());
#endif
#if AXIS_IS_TMC(E1)
say_M906(forReplay);
SERIAL_ECHOLNPAIR(" T1 E", stepperE1.getMilliamps());
#endif
#if AXIS_IS_TMC(E2)
say_M906(forReplay);
SERIAL_ECHOLNPAIR(" T2 E", stepperE2.getMilliamps());
#endif
#if AXIS_IS_TMC(E3)
say_M906(forReplay);
SERIAL_ECHOLNPAIR(" T3 E", stepperE3.getMilliamps());
#endif
#if AXIS_IS_TMC(E4)
say_M906(forReplay);
SERIAL_ECHOLNPAIR(" T4 E", stepperE4.getMilliamps());
#endif
#if AXIS_IS_TMC(E5)
say_M906(forReplay);
SERIAL_ECHOLNPAIR(" T5 E", stepperE5.getMilliamps());
#endif
#if AXIS_IS_TMC(E6)
say_M906(forReplay);
SERIAL_ECHOLNPAIR(" T6 E", stepperE6.getMilliamps());
#endif
#if AXIS_IS_TMC(E7)
say_M906(forReplay);
SERIAL_ECHOLNPAIR(" T7 E", stepperE7.getMilliamps());
#endif
SERIAL_EOL();
/**
* TMC Hybrid Threshold
*/
#if ENABLED(HYBRID_THRESHOLD)
CONFIG_ECHO_HEADING("Hybrid Threshold:");
#if X_HAS_STEALTHCHOP || Y_HAS_STEALTHCHOP || Z_HAS_STEALTHCHOP
say_M913(forReplay);
#if X_HAS_STEALTHCHOP
SERIAL_ECHOPAIR_P(SP_X_STR, stepperX.get_pwm_thrs());
#endif
#if Y_HAS_STEALTHCHOP
SERIAL_ECHOPAIR_P(SP_Y_STR, stepperY.get_pwm_thrs());
#endif
#if Z_HAS_STEALTHCHOP
SERIAL_ECHOPAIR_P(SP_Z_STR, stepperZ.get_pwm_thrs());
#endif
SERIAL_EOL();
#endif
#if X2_HAS_STEALTHCHOP || Y2_HAS_STEALTHCHOP || Z2_HAS_STEALTHCHOP
say_M913(forReplay);
SERIAL_ECHOPGM(" I1");
#if X2_HAS_STEALTHCHOP
SERIAL_ECHOPAIR_P(SP_X_STR, stepperX2.get_pwm_thrs());
#endif
#if Y2_HAS_STEALTHCHOP
SERIAL_ECHOPAIR_P(SP_Y_STR, stepperY2.get_pwm_thrs());
#endif
#if Z2_HAS_STEALTHCHOP
SERIAL_ECHOPAIR_P(SP_Z_STR, stepperZ2.get_pwm_thrs());
#endif
SERIAL_EOL();
#endif
#if Z3_HAS_STEALTHCHOP
say_M913(forReplay);
SERIAL_ECHOLNPAIR(" I2 Z", stepperZ3.get_pwm_thrs());
#endif
#if Z4_HAS_STEALTHCHOP
say_M913(forReplay);
SERIAL_ECHOLNPAIR(" I3 Z", stepperZ4.get_pwm_thrs());
#endif
#if I_HAS_STEALTHCHOP
say_M913(forReplay);
SERIAL_ECHOLNPAIR_P(SP_I_STR, stepperI.get_pwm_thrs());
#endif
#if J_HAS_STEALTHCHOP
say_M913(forReplay);
SERIAL_ECHOLNPAIR_P(SP_J_STR, stepperJ.get_pwm_thrs());
#endif
#if K_HAS_STEALTHCHOP
say_M913(forReplay);
SERIAL_ECHOLNPAIR_P(SP_K_STR, stepperK.get_pwm_thrs());
#endif
#if E0_HAS_STEALTHCHOP
say_M913(forReplay);
SERIAL_ECHOLNPAIR(" T0 E", stepperE0.get_pwm_thrs());
#endif
#if E1_HAS_STEALTHCHOP
say_M913(forReplay);
SERIAL_ECHOLNPAIR(" T1 E", stepperE1.get_pwm_thrs());
#endif
#if E2_HAS_STEALTHCHOP
say_M913(forReplay);
SERIAL_ECHOLNPAIR(" T2 E", stepperE2.get_pwm_thrs());
#endif
#if E3_HAS_STEALTHCHOP
say_M913(forReplay);
SERIAL_ECHOLNPAIR(" T3 E", stepperE3.get_pwm_thrs());
#endif
#if E4_HAS_STEALTHCHOP
say_M913(forReplay);
SERIAL_ECHOLNPAIR(" T4 E", stepperE4.get_pwm_thrs());
#endif
#if E5_HAS_STEALTHCHOP
say_M913(forReplay);
SERIAL_ECHOLNPAIR(" T5 E", stepperE5.get_pwm_thrs());
#endif
#if E6_HAS_STEALTHCHOP
say_M913(forReplay);
SERIAL_ECHOLNPAIR(" T6 E", stepperE6.get_pwm_thrs());
#endif
#if E7_HAS_STEALTHCHOP
say_M913(forReplay);
SERIAL_ECHOLNPAIR(" T7 E", stepperE7.get_pwm_thrs());
#endif
SERIAL_EOL();
#endif // HYBRID_THRESHOLD
/**
* TMC Sensorless homing thresholds
*/
#if USE_SENSORLESS
CONFIG_ECHO_HEADING("StallGuard threshold:");
#if X_SENSORLESS || Y_SENSORLESS || Z_SENSORLESS
CONFIG_ECHO_START();
say_M914();
#if X_SENSORLESS
SERIAL_ECHOPAIR_P(SP_X_STR, stepperX.homing_threshold());
#endif
#if Y_SENSORLESS
SERIAL_ECHOPAIR_P(SP_Y_STR, stepperY.homing_threshold());
#endif
#if Z_SENSORLESS
SERIAL_ECHOPAIR_P(SP_Z_STR, stepperZ.homing_threshold());
#endif
SERIAL_EOL();
#endif
#if X2_SENSORLESS || Y2_SENSORLESS || Z2_SENSORLESS
CONFIG_ECHO_START();
say_M914();
SERIAL_ECHOPGM(" I1");
#if X2_SENSORLESS
SERIAL_ECHOPAIR_P(SP_X_STR, stepperX2.homing_threshold());
#endif
#if Y2_SENSORLESS
SERIAL_ECHOPAIR_P(SP_Y_STR, stepperY2.homing_threshold());
#endif
#if Z2_SENSORLESS
SERIAL_ECHOPAIR_P(SP_Z_STR, stepperZ2.homing_threshold());
#endif
SERIAL_EOL();
#endif
#if Z3_SENSORLESS
CONFIG_ECHO_START();
say_M914();
SERIAL_ECHOLNPAIR(" I2 Z", stepperZ3.homing_threshold());
#endif
#if Z4_SENSORLESS
CONFIG_ECHO_START();
say_M914();
SERIAL_ECHOLNPAIR(" I3 Z", stepperZ4.homing_threshold());
#endif
#if I_SENSORLESS
CONFIG_ECHO_START();
say_M914();
SERIAL_ECHOLNPAIR_P(SP_I_STR, stepperI.homing_threshold());
#endif
#if J_SENSORLESS
CONFIG_ECHO_START();
say_M914();
SERIAL_ECHOLNPAIR_P(SP_J_STR, stepperJ.homing_threshold());
#endif
#if K_SENSORLESS
CONFIG_ECHO_START();
say_M914();
SERIAL_ECHOLNPAIR_P(SP_K_STR, stepperK.homing_threshold());
#endif
#endif // USE_SENSORLESS
/**
* TMC stepping mode
*/
#if HAS_STEALTHCHOP
CONFIG_ECHO_HEADING("Driver stepping mode:");
const bool chop_x = TERN0(X_HAS_STEALTHCHOP, stepperX.get_stored_stealthChop()),
chop_y = TERN0(Y_HAS_STEALTHCHOP, stepperY.get_stored_stealthChop()),
chop_z = TERN0(Z_HAS_STEALTHCHOP, stepperZ.get_stored_stealthChop()),
chop_i = TERN0(I_HAS_STEALTHCHOP, stepperI.get_stored_stealthChop()),
chop_j = TERN0(J_HAS_STEALTHCHOP, stepperJ.get_stored_stealthChop()),
chop_k = TERN0(K_HAS_STEALTHCHOP, stepperK.get_stored_stealthChop());
if (chop_x || chop_y || chop_z || chop_i || chop_j || chop_k) {
say_M569(forReplay);
LINEAR_AXIS_CODE(
if (chop_x) SERIAL_ECHOPGM_P(SP_X_STR),
if (chop_y) SERIAL_ECHOPGM_P(SP_Y_STR),
if (chop_z) SERIAL_ECHOPGM_P(SP_Z_STR),
if (chop_i) SERIAL_ECHOPGM_P(SP_I_STR),
if (chop_j) SERIAL_ECHOPGM_P(SP_J_STR),
if (chop_k) SERIAL_ECHOPGM_P(SP_K_STR)
);
SERIAL_EOL();
}
const bool chop_x2 = TERN0(X2_HAS_STEALTHCHOP, stepperX2.get_stored_stealthChop()),
chop_y2 = TERN0(Y2_HAS_STEALTHCHOP, stepperY2.get_stored_stealthChop()),
chop_z2 = TERN0(Z2_HAS_STEALTHCHOP, stepperZ2.get_stored_stealthChop());
if (chop_x2 || chop_y2 || chop_z2) {
say_M569(forReplay, PSTR("I1"));
if (chop_x2) SERIAL_ECHOPGM_P(SP_X_STR);
if (chop_y2) SERIAL_ECHOPGM_P(SP_Y_STR);
if (chop_z2) SERIAL_ECHOPGM_P(SP_Z_STR);
SERIAL_EOL();
}
if (TERN0(Z3_HAS_STEALTHCHOP, stepperZ3.get_stored_stealthChop())) { say_M569(forReplay, PSTR("I2 Z"), true); }
if (TERN0(Z4_HAS_STEALTHCHOP, stepperZ4.get_stored_stealthChop())) { say_M569(forReplay, PSTR("I3 Z"), true); }
if (TERN0( I_HAS_STEALTHCHOP, stepperI.get_stored_stealthChop())) { say_M569(forReplay, SP_I_STR, true); }
if (TERN0( J_HAS_STEALTHCHOP, stepperJ.get_stored_stealthChop())) { say_M569(forReplay, SP_J_STR, true); }
if (TERN0( K_HAS_STEALTHCHOP, stepperK.get_stored_stealthChop())) { say_M569(forReplay, SP_K_STR, true); }
if (TERN0(E0_HAS_STEALTHCHOP, stepperE0.get_stored_stealthChop())) { say_M569(forReplay, PSTR("T0 E"), true); }
if (TERN0(E1_HAS_STEALTHCHOP, stepperE1.get_stored_stealthChop())) { say_M569(forReplay, PSTR("T1 E"), true); }
if (TERN0(E2_HAS_STEALTHCHOP, stepperE2.get_stored_stealthChop())) { say_M569(forReplay, PSTR("T2 E"), true); }
if (TERN0(E3_HAS_STEALTHCHOP, stepperE3.get_stored_stealthChop())) { say_M569(forReplay, PSTR("T3 E"), true); }
if (TERN0(E4_HAS_STEALTHCHOP, stepperE4.get_stored_stealthChop())) { say_M569(forReplay, PSTR("T4 E"), true); }
if (TERN0(E5_HAS_STEALTHCHOP, stepperE5.get_stored_stealthChop())) { say_M569(forReplay, PSTR("T5 E"), true); }
if (TERN0(E6_HAS_STEALTHCHOP, stepperE6.get_stored_stealthChop())) { say_M569(forReplay, PSTR("T6 E"), true); }
if (TERN0(E7_HAS_STEALTHCHOP, stepperE7.get_stored_stealthChop())) { say_M569(forReplay, PSTR("T7 E"), true); }
#endif // HAS_STEALTHCHOP
#endif // HAS_TRINAMIC_CONFIG
/**
* Linear Advance
*/
#if ENABLED(LIN_ADVANCE)
CONFIG_ECHO_HEADING("Linear Advance:");
#if EXTRUDERS < 2
CONFIG_ECHO_MSG(" M900 K", planner.extruder_advance_K[0]);
#else
LOOP_L_N(i, EXTRUDERS)
CONFIG_ECHO_MSG(" M900 T", i, " K", planner.extruder_advance_K[i]);
#endif
#endif
#if EITHER(HAS_MOTOR_CURRENT_SPI, HAS_MOTOR_CURRENT_PWM)
CONFIG_ECHO_HEADING("Stepper motor currents:");
CONFIG_ECHO_START();
#if HAS_MOTOR_CURRENT_PWM
SERIAL_ECHOLNPAIR_P( // PWM-based has 3 values:
PSTR(" M907 X"), stepper.motor_current_setting[0] // X and Y
, SP_Z_STR, stepper.motor_current_setting[1] // Z
, SP_E_STR, stepper.motor_current_setting[2] // E
);
#elif HAS_MOTOR_CURRENT_SPI
SERIAL_ECHOPGM(" M907"); // SPI-based has 5 values:
LOOP_LOGICAL_AXES(q) { // X Y Z (I J K) E (map to X Y Z (I J K) E0 by default)
SERIAL_CHAR(' ', axis_codes[q]);
SERIAL_ECHO(stepper.motor_current_setting[q]);
}
SERIAL_CHAR(' ', 'B'); // B (maps to E1 by default)
SERIAL_ECHOLN(stepper.motor_current_setting[4]);
#endif
#elif HAS_MOTOR_CURRENT_I2C // i2c-based has any number of values
// Values sent over i2c are not stored.
// Indexes map directly to drivers, not axes.
#elif HAS_MOTOR_CURRENT_DAC // DAC-based has 4 values, for X Y Z (I J K) E
// Values sent over i2c are not stored. Uses indirect mapping.
#endif
/**
* Advanced Pause filament load & unload lengths
*/
#if ENABLED(ADVANCED_PAUSE_FEATURE)
CONFIG_ECHO_HEADING("Filament load/unload lengths:");
#if EXTRUDERS == 1
say_M603(forReplay);
SERIAL_ECHOLNPAIR("L", LINEAR_UNIT(fc_settings[0].load_length), " U", LINEAR_UNIT(fc_settings[0].unload_length));
#else
auto echo_603 = [](const bool f, const uint8_t n) { say_M603(f); SERIAL_ECHOLNPAIR("T", n, " L", LINEAR_UNIT(fc_settings[n].load_length), " U", LINEAR_UNIT(fc_settings[n].unload_length)); };
LOOP_L_N(i, EXTRUDERS) echo_603(forReplay, i);
#endif
#endif
#if HAS_MULTI_EXTRUDER
CONFIG_ECHO_HEADING("Tool-changing:");
CONFIG_ECHO_START();
M217_report(true);
#endif
#if ENABLED(BACKLASH_GCODE)
CONFIG_ECHO_HEADING("Backlash compensation:");
CONFIG_ECHO_START();
SERIAL_ECHOLNPAIR_P(
PSTR(" M425 F"), backlash.get_correction()
, LIST_N(DOUBLE(LINEAR_AXES),
SP_X_STR, LINEAR_UNIT(backlash.distance_mm.x),
SP_Y_STR, LINEAR_UNIT(backlash.distance_mm.y),
SP_Z_STR, LINEAR_UNIT(backlash.distance_mm.z),
SP_I_STR, LINEAR_UNIT(backlash.distance_mm.i),
SP_J_STR, LINEAR_UNIT(backlash.distance_mm.j),
SP_K_STR, LINEAR_UNIT(backlash.distance_mm.k)
)
#ifdef BACKLASH_SMOOTHING_MM
, PSTR(" S"), LINEAR_UNIT(backlash.smoothing_mm)
#endif
);
#endif
#if HAS_FILAMENT_SENSOR
CONFIG_ECHO_HEADING("Filament runout sensor:");
CONFIG_ECHO_MSG(
" M412 S", runout.enabled
#if HAS_FILAMENT_RUNOUT_DISTANCE
, " D", LINEAR_UNIT(runout.runout_distance())
#endif
);
#endif
#if HAS_ETHERNET
CONFIG_ECHO_HEADING("Ethernet:");
if (!forReplay) { CONFIG_ECHO_START(); ETH0_report(); }
CONFIG_ECHO_START(); SERIAL_ECHO_SP(2); MAC_report();
CONFIG_ECHO_START(); SERIAL_ECHO_SP(2); M552_report();
CONFIG_ECHO_START(); SERIAL_ECHO_SP(2); M553_report();
CONFIG_ECHO_START(); SERIAL_ECHO_SP(2); M554_report();
#endif
#if HAS_MULTI_LANGUAGE
CONFIG_ECHO_HEADING("UI Language:");
SERIAL_ECHO_MSG(" M414 S", ui.language);
#endif
}
#endif // !DISABLE_M503
#pragma pack(pop)