/**
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
#pragma once

/**
 * MarlinSerial_Due.h - Hardware serial library for Arduino DUE
 * Copyright (c) 2017 Eduardo José Tagle. All right reserved
 * Based on MarlinSerial for AVR, copyright (c) 2006 Nicholas Zambetti.  All right reserved.
 */

#include <WString.h>

#include "../../inc/MarlinConfigPre.h"

#define DEC 10
#define HEX 16
#define OCT 8
#define BIN 2

// Define constants and variables for buffering incoming serial data.  We're
// using a ring buffer (I think), in which rx_buffer_head is the index of the
// location to which to write the next incoming character and rx_buffer_tail
// is the index of the location from which to read.
// 256 is the max limit due to uint8_t head and tail. Use only powers of 2. (...,16,32,64,128,256)
#ifndef RX_BUFFER_SIZE
  #define RX_BUFFER_SIZE 128
#endif
#ifndef TX_BUFFER_SIZE
  #define TX_BUFFER_SIZE 32
#endif

//#if ENABLED(SERIAL_XON_XOFF) && RX_BUFFER_SIZE < 1024
//  #error "SERIAL_XON_XOFF requires RX_BUFFER_SIZE >= 1024 for reliable transfers without drops."
//#elif RX_BUFFER_SIZE && (RX_BUFFER_SIZE < 2 || !IS_POWER_OF_2(RX_BUFFER_SIZE))
//  #error "RX_BUFFER_SIZE must be a power of 2 greater than 1."
//#elif TX_BUFFER_SIZE && (TX_BUFFER_SIZE < 2 || TX_BUFFER_SIZE > 256 || !IS_POWER_OF_2(TX_BUFFER_SIZE))
//  #error "TX_BUFFER_SIZE must be 0, a power of 2 greater than 1, and no greater than 256."
//#endif

// Templated type selector
template<bool b, typename T, typename F> struct TypeSelector { typedef T type;} ;
template<typename T, typename F> struct TypeSelector<false, T, F> { typedef F type; };

// Templated structure wrapper
template<typename S, unsigned int addr> struct StructWrapper {
  constexpr StructWrapper(int) {}
  FORCE_INLINE S* operator->() const { return (S*)addr; }
};

template<typename Cfg>
class MarlinSerial {
protected:
  // Information for all supported UARTs
  static constexpr uint32_t BASES[] = {0x400E0800U, 0x40098000U, 0x4009C000U, 0x400A0000U, 0x400A4000U};
  static constexpr IRQn_Type IRQS[] = {  UART_IRQn, USART0_IRQn, USART1_IRQn, USART2_IRQn, USART3_IRQn};
  static constexpr int    IRQ_IDS[] = {    ID_UART,   ID_USART0,   ID_USART1,   ID_USART2,   ID_USART3};

  // Alias for shorter code
  static constexpr StructWrapper<Uart,BASES[Cfg::PORT]> HWUART = 0;
  static constexpr IRQn_Type HWUART_IRQ = IRQS[Cfg::PORT];
  static constexpr int HWUART_IRQ_ID = IRQ_IDS[Cfg::PORT];

  // Base size of type on buffer size
  typedef typename TypeSelector<(Cfg::RX_SIZE>256), uint16_t, uint8_t>::type ring_buffer_pos_t;

  struct ring_buffer_r {
    volatile ring_buffer_pos_t head, tail;
    unsigned char buffer[Cfg::RX_SIZE];
  };

  struct ring_buffer_t {
    volatile uint8_t head, tail;
    unsigned char buffer[Cfg::TX_SIZE];
  };

  static ring_buffer_r rx_buffer;
  static ring_buffer_t tx_buffer;
  static bool _written;

  static constexpr uint8_t XON_XOFF_CHAR_SENT = 0x80,  // XON / XOFF Character was sent
                           XON_XOFF_CHAR_MASK = 0x1F;  // XON / XOFF character to send

  // XON / XOFF character definitions
  static constexpr uint8_t XON_CHAR  = 17, XOFF_CHAR = 19;
  static uint8_t xon_xoff_state,
                 rx_dropped_bytes,
                 rx_buffer_overruns,
                 rx_framing_errors;
  static ring_buffer_pos_t rx_max_enqueued;

  FORCE_INLINE static void store_rxd_char();
  FORCE_INLINE static void _tx_thr_empty_irq();
  static void UART_ISR();

public:
  MarlinSerial() {};
  static void begin(const long);
  static void end();
  static int peek();
  static int read();
  static void flush();
  static ring_buffer_pos_t available();
  static void write(const uint8_t c);
  static void flushTX();

  static inline bool emergency_parser_enabled() { return Cfg::EMERGENCYPARSER; }

  FORCE_INLINE static uint8_t dropped() { return Cfg::DROPPED_RX ? rx_dropped_bytes : 0; }
  FORCE_INLINE static uint8_t buffer_overruns() { return Cfg::RX_OVERRUNS ? rx_buffer_overruns : 0; }
  FORCE_INLINE static uint8_t framing_errors() { return Cfg::RX_FRAMING_ERRORS ? rx_framing_errors : 0; }
  FORCE_INLINE static ring_buffer_pos_t rxMaxEnqueued() { return Cfg::MAX_RX_QUEUED ? rx_max_enqueued : 0; }

  FORCE_INLINE static void write(const char* str) { while (*str) write(*str++); }
  FORCE_INLINE static void write(const uint8_t* buffer, size_t size) { while (size--) write(*buffer++); }
  FORCE_INLINE static void print(const String& s) { for (int i = 0; i < (int)s.length(); i++) write(s[i]); }
  FORCE_INLINE static void print(const char* str) { write(str); }

  static void print(char, int = 0);
  static void print(unsigned char, int = 0);
  static void print(int, int = DEC);
  static void print(unsigned int, int = DEC);
  static void print(long, int = DEC);
  static void print(unsigned long, int = DEC);
  static void print(double, int = 2);

  static void println(const String& s);
  static void println(const char[]);
  static void println(char, int = 0);
  static void println(unsigned char, int = 0);
  static void println(int, int = DEC);
  static void println(unsigned int, int = DEC);
  static void println(long, int = DEC);
  static void println(unsigned long, int = DEC);
  static void println(double, int = 2);
  static void println();
  operator bool() { return true; }

private:
  static void printNumber(unsigned long, const uint8_t);
  static void printFloat(double, uint8_t);
};

// Serial port configuration
template <uint8_t serial>
struct MarlinSerialCfg {
  static constexpr int PORT               = serial;
  static constexpr unsigned int RX_SIZE   = RX_BUFFER_SIZE;
  static constexpr unsigned int TX_SIZE   = TX_BUFFER_SIZE;
  static constexpr bool XONOFF            = ENABLED(SERIAL_XON_XOFF);
  static constexpr bool EMERGENCYPARSER   = ENABLED(EMERGENCY_PARSER);
  static constexpr bool DROPPED_RX        = ENABLED(SERIAL_STATS_DROPPED_RX);
  static constexpr bool RX_OVERRUNS       = ENABLED(SERIAL_STATS_RX_BUFFER_OVERRUNS);
  static constexpr bool RX_FRAMING_ERRORS = ENABLED(SERIAL_STATS_RX_FRAMING_ERRORS);
  static constexpr bool MAX_RX_QUEUED     = ENABLED(SERIAL_STATS_MAX_RX_QUEUED);
};

#if SERIAL_PORT >= 0
  extern MarlinSerial<MarlinSerialCfg<SERIAL_PORT>> customizedSerial1;
#endif

#if defined(SERIAL_PORT_2) && SERIAL_PORT_2 >= 0
  extern MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>> customizedSerial2;
#endif