/** * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ #pragma once #include "tft_io.h" #include "../../inc/MarlinConfig.h" #define SSD1963_MADCTL_MY 0x80 // Row Address Order #define SSD1963_MADCTL_MX 0x40 // Column Address Order #define SSD1963_MADCTL_MV 0x20 // Row/Column Exchange #define SSD1963_MADCTL_MH 0x10 // Horizontal Refresh Order #define SSD1963_MADCTL_BGR 0x08 // RGB-BGR ORDER #define SSD1963_MADCTL_RGB 0x00 #define SSD1963_MADCTL_ML 0x04 // Vertical Refresh Order #define SSD1963_MADCTL_FH 0x02 // Flip Horizontal #define SSD1963_MADCTL_FV 0x01 // Flip Vertical #define SSD1963_ORIENTATION IF_0((TFT_ORIENTATION) & TFT_EXCHANGE_XY, SSD1963_MADCTL_MV) | \ IF_0((TFT_ORIENTATION) & TFT_INVERT_X, SSD1963_MADCTL_FH) | \ IF_0((TFT_ORIENTATION) & TFT_INVERT_Y, SSD1963_MADCTL_FV) #if !defined(TFT_COLOR) || TFT_COLOR == TFT_COLOR_BGR #define SSD1963_COLOR SSD1963_MADCTL_BGR #elif TFT_COLOR == TFT_COLOR_RGB #define SSD1963_COLOR SSD1963_MADCTL_RGB #endif #define SSD1963_MADCTL_DATA (SSD1963_ORIENTATION) | (SSD1963_COLOR) #define SSD1963_NOP 0x00 // No Operation #define SSD1963_SWRESET 0x01 // Software reset #define SSD1963_RDDPM 0x0A // Read Display Power Mode #define SSD1963_RDDMADCTL 0x0B // Read Display MADCTL #define SSD1963_RDDCOLMOD 0x0C // Read Display Pixel Format #define SSD1963_RDDIM 0x0D // Read Display Image Mode #define SSD1963_RDDSM 0x0E // Read Display Signal Mode #define SSD1963_SLPIN 0x10 // Sleep In #define SSD1963_SLPOUT 0x11 // Sleep Out #define SSD1963_PTLON 0x12 // Partial Display Mode On #define SSD1963_NORON 0x13 // Normal Display Mode On #define SSD1963_INVOFF 0x20 // Display Inversion Off #define SSD1963_INVON 0x21 // Display Inversion On #define SSD1963_GAMSET 0x26 // Gamma Set #define SSD1963_DISPOFF 0x28 // Display Off #define SSD1963_DISPON 0x29 // Display On #define SSD1963_CASET 0x2A // Column Address Set #define SSD1963_RASET 0x2B // Row Address Set #define SSD1963_RAMWR 0x2C // Memory Write #define SSD1963_RAMRD 0x2E // Memory Read #define SSD1963_PTLAR 0x30 // Partial Area #define SSD1963_VSCRDEF 0x33 // Vertical Scrolling Definition #define SSD1963_TEOFF 0x34 // Tearing Effect Line OFF #define SSD1963_TEON 0x35 // Tearing Effect Line ON #define SSD1963_MADCTL 0x36 // Memory Data Access Control #define SSD1963_VSCSAD 0x37 // Vertical Scroll Start Address of RAM #define SSD1963_IDMOFF 0x38 // Idle Mode Off #define SSD1963_IDMON 0x39 // Idle Mode On #define SSD1963_WRMEMC 0x3C // Write Memory Continue #define SSD1963_RDMEMC 0x3E // Read Memory Continue #define SSD1963_STE 0x44 // Set Tear Scanline #define SSD1963_GSCAN 0x45 // Get Scanline #define SSD1963_WRDISBV 0x51 // Write Display Brightness #define SSD1963_RDDISBV 0x52 // Read Display Brightness #define SSD1963_WRCTRLD 0x53 // Write CTRL Display #define SSD1963_RDCTRLD 0x54 // Read CTRL Value Display #define SSD1963_WRCACE 0x55 // Write Content Adaptive Brightness Control and Color Enhancement #define SSD1963_RDCABC 0x56 // Read Content Adaptive Brightness Control #define SSD1963_WRCABCMB 0x5E // Write CABC Minimum Brightness #define SSD1963_RDCABCMB 0x5F // Read CABC Minimum Brightness #define SSD1963_RDABCSDR 0x68 // Read Automatic Brightness Control Self-Diagnostic Result #define SSD1963_RDDDB 0xA1 // Read Device Descriptor Block #define SSD1963_SLCDMODE 0xB0 // Set the LCD panel mode and resolution #define SSD1963_SHSYNC 0xB4 // Set HSYNC #define SSD1963_GHSYNC 0xB5 // Get HSYNC #define SSD1963_SVSYNC 0xB6 // Set VSYNC #define SSD1963_GVSYNC 0xB7 // Get VSYNC #define SSD1963_SGPIOCFG 0xB8 // Set GPIO Conf #define SSD1963_SGPIOV 0xBA // Set GPIO Value #define SSD1963_SPWMCFG 0xBE // Set PWM Conf #define SSD1963_GPWMCFG 0xBF // Get PWM Conf #define SSD1963_SDBCCFG 0xD0 // Set Dynamic Back Light Config #define SSD1963_GDBCCFG 0xD1 // Get Dynamic Back Light Config #define SSD1963_PLLON 0xE0 // PLL Enable #define SSD1963_PLLMN 0xE2 // Set PLL Multiplier #define SSD1963_SLSHIFT 0xE6 // Set the LSHIFT (pixel clock) frequency #define SSD1963_COLMOD 0xF0 // Interface Pixel Format static const uint16_t ssd1963_init[] = { DATASIZE_8BIT, ESC_REG(SSD1963_PLLMN), 0x0023, 0x0002, 0x0054, ESC_REG(SSD1963_PLLON), 0x0001, ESC_DELAY(10), ESC_REG(SSD1963_PLLON), 0x0003, ESC_DELAY(10), ESC_REG(SSD1963_SWRESET), ESC_DELAY(100), ESC_REG(SSD1963_SLSHIFT), 0x0001, 0x001F, 0x00FF, ESC_REG(SSD1963_SLCDMODE), 0x0020, 0x0000, 0x0001, 0x00DF, 0x0001, 0x000F, 0x0000, ESC_REG(SSD1963_SHSYNC), 0x0002, 0x0013, 0x0000, 0x0008, 0x002B, 0x0000, 0x0002, 0x0000, ESC_REG(SSD1963_SVSYNC), 0x0001, 0x0020, 0x0000, 0x0004, 0x000C, 0x0000, 0x0002, ESC_REG(SSD1963_SGPIOV), 0x000F, ESC_REG(SSD1963_SGPIOCFG), 0x0007, 0x0001, ESC_REG(SSD1963_MADCTL), SSD1963_MADCTL_DATA, ESC_REG(SSD1963_COLMOD), 0x0003, ESC_DELAY(1),//RBG 565 ESC_REG(SSD1963_NORON), ESC_REG(SSD1963_DISPON), ESC_REG(SSD1963_SPWMCFG), 0x0006, 0x00f0, 0x0001, 0x00f0, 0x0000, 0x0000, ESC_REG(SSD1963_SDBCCFG), 0x000D, ESC_END };