/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see .
*
*/
/**
* DWIN Enhanced implementation for PRO UI
* Author: Miguel A. Risco-Castillo (MRISCOC)
* Version: 3.17.2
* Date: 2022/04/08
*/
#include "../../../inc/MarlinConfig.h"
#if ENABLED(DWIN_LCD_PROUI)
#if DISABLED(LIMITED_MAX_FR_EDITING)
#warning "LIMITED_MAX_FR_EDITING is recommended with ProUI."
#endif
#if DISABLED(LIMITED_MAX_ACCEL_EDITING)
#warning "LIMITED_MAX_ACCEL_EDITING is recommended with ProUI."
#endif
#if ENABLED(CLASSIC_JERK) && DISABLED(LIMITED_JERK_EDITING)
#warning "LIMITED_JERK_EDITING is recommended with ProUI."
#endif
#if DISABLED(INDIVIDUAL_AXIS_HOMING_SUBMENU)
#warning "INDIVIDUAL_AXIS_HOMING_SUBMENU is recommended with ProUI."
#endif
#if DISABLED(LCD_SET_PROGRESS_MANUALLY)
#warning "LCD_SET_PROGRESS_MANUALLY is recommended with ProUI."
#endif
#if DISABLED(STATUS_MESSAGE_SCROLLING)
#warning "STATUS_MESSAGE_SCROLLING is recommended with ProUI."
#endif
#if DISABLED(BAUD_RATE_GCODE)
#warning "BAUD_RATE_GCODE is recommended with ProUI."
#endif
#if DISABLED(SOUND_MENU_ITEM)
#warning "SOUND_MENU_ITEM is recommended with ProUI."
#endif
#if DISABLED(PRINTCOUNTER)
#warning "PRINTCOUNTER is recommended with ProUI."
#endif
#if HAS_MESH && DISABLED(MESH_EDIT_MENU)
#warning "MESH_EDIT_MENU is recommended with ProUI."
#endif
#include "dwin.h"
#include "menus.h"
#include "dwin_popup.h"
#include "../../fontutils.h"
#include "../../marlinui.h"
#include "../../../sd/cardreader.h"
#include "../../../MarlinCore.h"
#include "../../../core/serial.h"
#include "../../../core/macros.h"
#include "../../../module/temperature.h"
#include "../../../module/printcounter.h"
#include "../../../module/motion.h"
#include "../../../module/planner.h"
#include "../../../gcode/gcode.h"
#include "../../../gcode/queue.h"
#if HAS_FILAMENT_SENSOR
#include "../../../feature/runout.h"
#endif
#if ENABLED(EEPROM_SETTINGS)
#include "../../../module/settings.h"
#endif
#if ENABLED(HOST_ACTION_COMMANDS)
#include "../../../feature/host_actions.h"
#endif
#if DISABLED(PROBE_MANUALLY) && ANY(AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_3POINT)
#define HAS_ONESTEP_LEVELING 1
#endif
#if HAS_MESH || (HAS_LEVELING && HAS_ZOFFSET_ITEM)
#include "../../../feature/bedlevel/bedlevel.h"
#include "bedlevel_tools.h"
#endif
#if HAS_BED_PROBE
#include "../../../module/probe.h"
#endif
#if ENABLED(BLTOUCH)
#include "../../../feature/bltouch.h"
#endif
#if EITHER(BABYSTEPPING, HAS_BED_PROBE)
#define HAS_ZOFFSET_ITEM 1
#if ENABLED(BABYSTEPPING)
#include "../../../feature/babystep.h"
#if !HAS_BED_PROBE
#define JUST_BABYSTEP 1
#endif
#endif
#endif
#if ENABLED(POWER_LOSS_RECOVERY)
#include "../../../feature/powerloss.h"
#endif
#if HAS_ESDIAG
#include "endstop_diag.h"
#endif
#if HAS_PIDPLOT
#include "plot.h"
#endif
#if HAS_GCODE_PREVIEW
#include "gcode_preview.h"
#endif
#if HAS_MESH
#include "meshviewer.h"
#endif
#if ENABLED(PRINTCOUNTER)
#include "printstats.h"
#endif
#if ENABLED(CASE_LIGHT_MENU)
#include "../../../feature/caselight.h"
#endif
#if ENABLED(LED_CONTROL_MENU)
#include "../../../feature/leds/leds.h"
#endif
#if HAS_LOCKSCREEN
#include "lockscreen.h"
#endif
#ifndef MACHINE_SIZE
#define MACHINE_SIZE STRINGIFY(X_BED_SIZE) "x" STRINGIFY(Y_BED_SIZE) "x" STRINGIFY(Z_MAX_POS)
#endif
#define PAUSE_HEAT
#define MENU_CHAR_LIMIT 24
// Print speed limit
#define MIN_PRINT_SPEED 10
#define MAX_PRINT_SPEED 999
// Print flow limit
#define MIN_PRINT_FLOW 10
#define MAX_PRINT_FLOW 299
// Load and Unload limits
#define MAX_LOAD_UNLOAD 500
// Feedspeed limit (max feedspeed = MAX_FEEDRATE_EDIT_VALUES)
#define MIN_MAXFEEDSPEED 1
#define MIN_MAXACCELERATION 1
#define MIN_MAXJERK 0.1
#define MIN_STEP 1
#define MAX_STEP 999.9
// Editable temperature limits
#define MIN_ETEMP 0
#define MAX_ETEMP (HEATER_0_MAXTEMP - (HOTEND_OVERSHOOT))
#define MIN_BEDTEMP 0
#define MAX_BEDTEMP BED_MAX_TARGET
#define FEEDRATE_E (60)
#define DWIN_VAR_UPDATE_INTERVAL 1024
#define DWIN_SCROLL_UPDATE_INTERVAL SEC_TO_MS(2)
#define DWIN_REMAIN_TIME_UPDATE_INTERVAL SEC_TO_MS(20)
#if HAS_MESH
#define BABY_Z_VAR TERN(HAS_BED_PROBE, probe.offset.z, HMI_data.ManualZOffset)
#else
float z_offset = 0;
#define BABY_Z_VAR z_offset
#endif
// Structs
HMI_value_t HMI_value;
HMI_flag_t HMI_flag{0};
HMI_data_t HMI_data;
millis_t dwin_heat_time = 0;
uint8_t checkkey = 255, last_checkkey = MainMenu;
enum SelectItem : uint8_t {
PAGE_PRINT = 0,
PAGE_PREPARE,
PAGE_CONTROL,
PAGE_ADVANCE,
PAGE_COUNT,
PRINT_SETUP = 0,
PRINT_PAUSE_RESUME,
PRINT_STOP,
PRINT_COUNT
};
typedef struct {
uint8_t now, last;
void set(uint8_t v) { now = last = v; }
void reset() { set(0); }
bool changed() { bool c = (now != last); if (c) last = now; return c; }
bool dec() { if (now) now--; return changed(); }
bool inc(uint8_t v) { if (now < (v - 1)) now++; else now = (v - 1); return changed(); }
} select_t;
select_t select_page{0}, select_file{0}, select_print{0};
uint8_t index_file = MROWS;
bool hash_changed = true; // Flag to know if message status was changed
constexpr float max_feedrate_edit_values[] =
#ifdef MAX_FEEDRATE_EDIT_VALUES
MAX_FEEDRATE_EDIT_VALUES
#else
{ 1000, 1000, 10, 50 }
#endif
;
constexpr float max_acceleration_edit_values[] =
#ifdef MAX_ACCEL_EDIT_VALUES
MAX_ACCEL_EDIT_VALUES
#else
{ 1000, 1000, 200, 2000 }
#endif
;
#if HAS_CLASSIC_JERK
constexpr float max_jerk_edit_values[] =
#ifdef MAX_JERK_EDIT_VALUES
MAX_JERK_EDIT_VALUES
#else
{ DEFAULT_XJERK * 2, DEFAULT_YJERK * 2, DEFAULT_ZJERK * 2, DEFAULT_EJERK * 2 }
#endif
;
#endif
static uint8_t _percent_done = 0;
static uint32_t _remain_time = 0;
// Additional Aux Host Support
static bool sdprint = false;
#if HAS_HOTEND
float last_E = 0;
#endif
// New menu system pointers
MenuClass *PrepareMenu = nullptr;
MenuClass *TrammingMenu = nullptr;
MenuClass *MoveMenu = nullptr;
MenuClass *ControlMenu = nullptr;
MenuClass *AdvancedSettings = nullptr;
#if HAS_HOME_OFFSET
MenuClass *HomeOffMenu = nullptr;
#endif
#if HAS_BED_PROBE
MenuClass *ProbeSetMenu = nullptr;
#endif
MenuClass *FilSetMenu = nullptr;
MenuClass *SelectColorMenu = nullptr;
MenuClass *GetColorMenu = nullptr;
MenuClass *TuneMenu = nullptr;
MenuClass *MotionMenu = nullptr;
MenuClass *FilamentMenu = nullptr;
#if ENABLED(MESH_BED_LEVELING)
MenuClass *ManualMesh = nullptr;
#endif
#if HAS_HOTEND
MenuClass *PreheatMenu = nullptr;
#endif
MenuClass *TemperatureMenu = nullptr;
MenuClass *MaxSpeedMenu = nullptr;
MenuClass *MaxAccelMenu = nullptr;
#if HAS_CLASSIC_JERK
MenuClass *MaxJerkMenu = nullptr;
#endif
MenuClass *StepsMenu = nullptr;
MenuClass *HotendPIDMenu = nullptr;
MenuClass *BedPIDMenu = nullptr;
#if ENABLED(CASELIGHT_USES_BRIGHTNESS)
MenuClass *CaseLightMenu = nullptr;
#endif
#if ENABLED(LED_CONTROL_MENU)
MenuClass *LedControlMenu = nullptr;
#endif
#if HAS_BED_PROBE
MenuClass *ZOffsetWizMenu = nullptr;
#endif
#if ENABLED(INDIVIDUAL_AXIS_HOMING_SUBMENU)
MenuClass *HomingMenu = nullptr;
#endif
#if ENABLED(FWRETRACT)
MenuClass *FWRetractMenu = nullptr;
#endif
#if HAS_MESH
MenuClass *MeshMenu = nullptr;
#if ENABLED(MESH_EDIT_MENU)
MenuClass *EditMeshMenu = nullptr;
#endif
#endif
// Updatable menuitems pointers
MenuItemClass *HotendTargetItem = nullptr;
MenuItemClass *BedTargetItem = nullptr;
MenuItemClass *FanSpeedItem = nullptr;
MenuItemClass *MMeshMoveZItem = nullptr;
MenuItemClass *EditZValueItem = nullptr;
#define DWIN_LANGUAGE_EEPROM_ADDRESS 0x01 // Between 0x01 and 0x63 (EEPROM_OFFSET-1)
// BL24CXX::check() uses 0x00
inline bool HMI_IsChinese() { return HMI_flag.language == DWIN_CHINESE; }
void HMI_SetLanguageCache() {
DWIN_JPG_CacheTo1(HMI_IsChinese() ? Language_Chinese : Language_English);
}
void HMI_SetLanguage() {
#if BOTH(EEPROM_SETTINGS, IIC_BL24CXX_EEPROM)
BL24CXX::read(DWIN_LANGUAGE_EEPROM_ADDRESS, (uint8_t*)&HMI_flag.language, sizeof(HMI_flag.language));
#endif
HMI_SetLanguageCache();
}
void HMI_ToggleLanguage() {
HMI_flag.language = HMI_IsChinese() ? DWIN_ENGLISH : DWIN_CHINESE;
HMI_SetLanguageCache();
#if BOTH(EEPROM_SETTINGS, IIC_BL24CXX_EEPROM)
BL24CXX::write(DWIN_LANGUAGE_EEPROM_ADDRESS, (uint8_t*)&HMI_flag.language, sizeof(HMI_flag.language));
#endif
}
//-----------------------------------------------------------------------------
// Main Buttons
//-----------------------------------------------------------------------------
typedef struct { uint16_t x, y[2], w, h; } text_info_t;
void ICON_Button(const bool selected, const int iconid, const frame_rect_t &ico, const text_info_t (&txt), FSTR_P caption) {
DWIN_ICON_Show(true, false, false, ICON, iconid + selected, ico.x, ico.y);
if (selected) DWINUI::Draw_Box(0, HMI_data.Highlight_Color, ico);
if (HMI_IsChinese()) {
DWIN_Frame_AreaCopy(1, txt.x, txt.y[selected], txt.x + txt.w - 1, txt.y[selected] + txt.h - 1, ico.x + (ico.w - txt.w) / 2, (ico.y + ico.h - 25) - txt.h/2);
}
else {
const uint16_t x = ico.x + (ico.w - strlen_P(FTOP(caption)) * DWINUI::fontWidth()) / 2,
y = (ico.y + ico.h - 20) - DWINUI::fontHeight() / 2;
DWINUI::Draw_String(x, y, caption);
}
}
//
// Main Menu: "Print"
//
void ICON_Print() {
constexpr frame_rect_t ico = { 17, 110, 110, 100 };
constexpr text_info_t txt = { 1, { 405, TERN(USE_STOCK_DWIN_SET, 446, 447) }, 27, 15 };
ICON_Button(select_page.now == PAGE_PRINT, ICON_Print_0, ico, txt, GET_TEXT_F(MSG_BUTTON_PRINT));
}
//
// Main Menu: "Prepare"
//
void ICON_Prepare() {
constexpr frame_rect_t ico = { 145, 110, 110, 100 };
constexpr text_info_t txt = { 31, { 405, TERN(USE_STOCK_DWIN_SET, 446, 447) }, 27, 15 };
ICON_Button(select_page.now == PAGE_PREPARE, ICON_Prepare_0, ico, txt, GET_TEXT_F(MSG_PREPARE));
}
//
// Main Menu: "Control"
//
void ICON_Control() {
constexpr frame_rect_t ico = { 17, 226, 110, 100 };
constexpr text_info_t txt = { 61, { 405, TERN(USE_STOCK_DWIN_SET, 446, 447) }, 27, 15 };
ICON_Button(select_page.now == PAGE_CONTROL, ICON_Control_0, ico, txt, GET_TEXT_F(MSG_CONTROL));
}
//
// Main Menu: "Advanced Settings"
//
void ICON_AdvSettings() {
constexpr frame_rect_t ico = { 145, 226, 110, 100 };
constexpr text_info_t txt = { 91, { 405, TERN(USE_STOCK_DWIN_SET, 446, 447) }, 27, 15 };
ICON_Button(select_page.now == PAGE_ADVANCE, ICON_Info_0, ico, txt, GET_TEXT_F(MSG_BUTTON_ADVANCED));
}
//
// Printing: "Tune"
//
void ICON_Tune() {
constexpr frame_rect_t ico = { 8, 232, 80, 100 };
constexpr text_info_t txt = { 121, { 405, TERN(USE_STOCK_DWIN_SET, 446, 447) }, 27, 15 };
ICON_Button(select_print.now == PRINT_SETUP, ICON_Setup_0, ico, txt, GET_TEXT_F(MSG_TUNE));
}
//
// Printing: "Pause"
//
void ICON_Pause() {
constexpr frame_rect_t ico = { 96, 232, 80, 100 };
constexpr text_info_t txt = { 181, { 405, TERN(USE_STOCK_DWIN_SET, 446, 447) }, 27, 15 };
ICON_Button(select_print.now == PRINT_PAUSE_RESUME, ICON_Pause_0, ico, txt, GET_TEXT_F(MSG_BUTTON_PAUSE));
}
//
// Printing: "Resume"
//
void ICON_Resume() {
constexpr frame_rect_t ico = { 96, 232, 80, 100 };
constexpr text_info_t txt = { 1, { 405, TERN(USE_STOCK_DWIN_SET, 446, 447) }, 27, 15 };
ICON_Button(select_print.now == PRINT_PAUSE_RESUME, ICON_Continue_0, ico, txt, GET_TEXT_F(MSG_BUTTON_RESUME));
}
//
// Printing: "Stop"
//
void ICON_Stop() {
constexpr frame_rect_t ico = { 184, 232, 80, 100 };
constexpr text_info_t txt = { 151, { 405, TERN(USE_STOCK_DWIN_SET, 446, 447) }, 27, 12 };
ICON_Button(select_print.now == PRINT_STOP, ICON_Stop_0, ico, txt, GET_TEXT_F(MSG_BUTTON_STOP));
}
//-----------------------------------------------------------------------------
// Drawing routines
//-----------------------------------------------------------------------------
void Move_Highlight(const int8_t from, const int8_t newline) {
Erase_Menu_Cursor(newline - from);
Draw_Menu_Cursor(newline);
}
void Add_Menu_Line() {
Move_Highlight(1, MROWS);
DWIN_Draw_HLine(HMI_data.SplitLine_Color, 16, MYPOS(MROWS + 1), 240);
}
void Scroll_Menu(const uint8_t dir) {
DWIN_Frame_AreaMove(1, dir, MLINE, HMI_data.Background_Color, 0, 31, DWIN_WIDTH, 349);
switch (dir) {
case DWIN_SCROLL_DOWN: Move_Highlight(-1, 0); break;
case DWIN_SCROLL_UP: Add_Menu_Line(); break;
}
}
inline uint16_t nr_sd_menu_items() {
return card.get_num_Files() + !card.flag.workDirIsRoot;
}
void Erase_Menu_Text(const uint8_t line) {
DWIN_Draw_Rectangle(1, HMI_data.Background_Color, LBLX, MBASE(line) - 14, 271, MBASE(line) + 28);
}
// Draw "Back" line at the top
void Draw_Back_First(const bool is_sel=true) {
Draw_Menu_Line(0, ICON_Back);
if (HMI_IsChinese())
DWIN_Frame_AreaCopy(1, 129, 72, 156, 84, LBLX, MBASE(0));
else
DWINUI::Draw_String(LBLX, MBASE(0), GET_TEXT_F(MSG_BACK));
if (is_sel) Draw_Menu_Cursor(0);
}
//PopUps
void Popup_window_PauseOrStop() {
if (HMI_IsChinese()) {
DWINUI::ClearMainArea();
Draw_Popup_Bkgd();
if (select_print.now == PRINT_PAUSE_RESUME) DWIN_Frame_AreaCopy(1, 237, 338, 269, 356, 98, 150);
else if (select_print.now == PRINT_STOP) DWIN_Frame_AreaCopy(1, 221, 320, 253, 336, 98, 150);
DWIN_Frame_AreaCopy(1, 220, 304, 264, 319, 130, 150);
DWINUI::Draw_IconWB(ICON_Confirm_C, 26, 280);
DWINUI::Draw_IconWB(ICON_Cancel_C, 146, 280);
Draw_Select_Highlight(true);
DWIN_UpdateLCD();
}
else
DWIN_Popup_ConfirmCancel(ICON_BLTouch, select_print.now == PRINT_PAUSE_RESUME ? GET_TEXT_F(MSG_PAUSE_PRINT) : GET_TEXT_F(MSG_STOP_PRINT));
}
#if HAS_HOTEND
void Popup_Window_ETempTooLow() {
if (HMI_IsChinese()) {
HMI_SaveProcessID(WaitResponse);
DWINUI::ClearMainArea();
Draw_Popup_Bkgd();
DWINUI::Draw_Icon(ICON_TempTooLow, 102, 105);
DWIN_Frame_AreaCopy(1, 103, 371, 136, 386, 69, 240);
DWIN_Frame_AreaCopy(1, 170, 371, 270, 386, 102, 240);
DWINUI::Draw_IconWB(ICON_Confirm_C, 86, 280);
DWIN_UpdateLCD();
}
else
DWIN_Popup_Confirm(ICON_TempTooLow, GET_TEXT_F(MSG_HOTEND_TOO_COLD), GET_TEXT_F(MSG_PLEASE_PREHEAT));
}
#endif
#if HAS_HOTEND || HAS_HEATED_BED
void DWIN_Popup_Temperature(const bool toohigh) {
HMI_SaveProcessID(WaitResponse);
if (HMI_IsChinese()) {
DWINUI::ClearMainArea();
Draw_Popup_Bkgd();
if (toohigh) {
DWINUI::Draw_Icon(ICON_TempTooHigh, 102, 165);
DWIN_Frame_AreaCopy(1, 103, 371, 237, 386, 52, 285);
DWIN_Frame_AreaCopy(1, 151, 389, 185, 402, 187, 285);
DWIN_Frame_AreaCopy(1, 189, 389, 271, 402, 95, 310);
}
else {
DWINUI::Draw_Icon(ICON_TempTooLow, 102, 165);
DWIN_Frame_AreaCopy(1, 103, 371, 270, 386, 52, 285);
DWIN_Frame_AreaCopy(1, 189, 389, 271, 402, 95, 310);
}
}
else DWIN_Show_Popup(toohigh ? ICON_TempTooHigh : ICON_TempTooLow, F("Nozzle or Bed temperature"), toohigh ? F("is too high") : F("is too low"), BTN_Continue);
}
#endif
// Draw status line
void DWIN_DrawStatusLine() {
DWIN_Draw_Rectangle(1, HMI_data.StatusBg_Color, 0, STATUS_Y, DWIN_WIDTH, STATUS_Y + 20);
DWINUI::Draw_CenteredString(HMI_data.StatusTxt_Color, STATUS_Y + 2, ui.status_message);
}
// Clear & reset status line
void DWIN_ResetStatusLine() {
ui.status_message[0] = 0;
DWIN_CheckStatusMessage();
}
// Djb2 hash algorithm
void DWIN_CheckStatusMessage() {
static uint32_t old_hash = 0;
char * str = &ui.status_message[0];
uint32_t hash = 5381;
char c;
while ((c = *str++)) hash = ((hash << 5) + hash) + c; /* hash * 33 + c */
hash_changed = hash != old_hash;
old_hash = hash;
};
void DWIN_DrawStatusMessage() {
#if ENABLED(STATUS_MESSAGE_SCROLLING)
// Get the UTF8 character count of the string
uint8_t slen = utf8_strlen(ui.status_message);
// If the string fits the status line do not scroll it
if (slen <= LCD_WIDTH) {
if (hash_changed) {
DWIN_DrawStatusLine();
hash_changed = false;
}
}
else {
// String is larger than the available line space
// Get a pointer to the next valid UTF8 character
// and the string remaining length
uint8_t rlen;
const char *stat = MarlinUI::status_and_len(rlen);
DWIN_Draw_Rectangle(1, HMI_data.StatusBg_Color, 0, STATUS_Y, DWIN_WIDTH, STATUS_Y + 20);
DWINUI::MoveTo(0, STATUS_Y + 2);
DWINUI::Draw_String(HMI_data.StatusTxt_Color, stat, LCD_WIDTH);
// If the string doesn't completely fill the line...
if (rlen < LCD_WIDTH) {
DWINUI::Draw_Char(HMI_data.StatusTxt_Color, '.'); // Always at 1+ spaces left, draw a dot
uint8_t chars = LCD_WIDTH - rlen; // Amount of space left in characters
if (--chars) { // Draw a second dot if there's space
DWINUI::Draw_Char(HMI_data.StatusTxt_Color, '.');
if (--chars)
DWINUI::Draw_String(HMI_data.StatusTxt_Color, ui.status_message, chars); // Print a second copy of the message
}
}
MarlinUI::advance_status_scroll();
}
#else
if (hash_changed) {
ui.status_message[LCD_WIDTH] = 0;
DWIN_DrawStatusLine();
hash_changed = false;
}
#endif
}
void Draw_Print_Labels() {
if (HMI_IsChinese()) {
DWIN_Frame_AreaCopy(1, 0, 72, 63, 86, 41, 173); // Printing Time
DWIN_Frame_AreaCopy(1, 65, 72, 128, 86, 176, 173); // Remain
}
else {
DWINUI::Draw_String( 46, 173, GET_TEXT_F(MSG_INFO_PRINT_TIME));
DWINUI::Draw_String(181, 173, GET_TEXT_F(MSG_REMAINING_TIME));
}
}
void Draw_Print_ProgressBar() {
DWIN_ICON_Show(true, false, false, ICON, ICON_Bar, 15, 93);
DWIN_Draw_Rectangle(1, HMI_data.Barfill_Color, 16 + _percent_done * 240 / 100, 93, 256, 113);
DWINUI::Draw_Int(HMI_data.PercentTxt_Color, HMI_data.Background_Color, 3, 117, 133, _percent_done);
DWINUI::Draw_String(HMI_data.PercentTxt_Color, 142, 133, F("%"));
}
void Draw_Print_ProgressElapsed() {
char buf[10];
duration_t elapsed = print_job_timer.duration(); // print timer
sprintf_P(buf, PSTR("%02i:%02i "), (uint16_t)(elapsed.value / 3600), ((uint16_t)elapsed.value % 3600) / 60);
DWINUI::Draw_String(HMI_data.Text_Color, HMI_data.Background_Color, 47, 192, buf);
}
void Draw_Print_ProgressRemain() {
char buf[10];
sprintf_P(buf, PSTR("%02i:%02i "), (uint16_t)(_remain_time / 3600), ((uint16_t)_remain_time % 3600) / 60);
DWINUI::Draw_String(HMI_data.Text_Color, HMI_data.Background_Color, 181, 192, buf);
}
void ICON_ResumeOrPause() {
if (checkkey == PrintProcess) printingIsPaused() ? ICON_Resume() : ICON_Pause();
}
// Update filename on print
void DWIN_Print_Header(const char *text=nullptr) {
static char headertxt[31] = ""; // Print header text
if (text) {
const int8_t size = _MIN(30U, strlen_P(text));
LOOP_L_N(i, size) headertxt[i] = text[i];
headertxt[size] = '\0';
}
if (checkkey == PrintProcess || checkkey == PrintDone) {
DWIN_Draw_Rectangle(1, HMI_data.Background_Color, 0, 60, DWIN_WIDTH, 60+16);
DWINUI::Draw_CenteredString(60, headertxt);
}
}
void Draw_PrintProcess() {
if (HMI_IsChinese())
Title.FrameCopy(30, 1, 42, 14); // "Printing"
else
Title.ShowCaption(GET_TEXT_F(MSG_PRINTING));
DWINUI::ClearMainArea();
DWIN_Print_Header(sdprint ? card.longest_filename() : nullptr);
Draw_Print_Labels();
DWINUI::Draw_Icon(ICON_PrintTime, 15, 173);
DWINUI::Draw_Icon(ICON_RemainTime, 150, 171);
Draw_Print_ProgressBar();
Draw_Print_ProgressElapsed();
Draw_Print_ProgressRemain();
ICON_Tune();
ICON_ResumeOrPause();
ICON_Stop();
}
void Goto_PrintProcess() {
if (checkkey == PrintProcess)
ICON_ResumeOrPause();
else {
checkkey = PrintProcess;
Draw_PrintProcess();
TERN_(DASH_REDRAW, DWIN_RedrawDash());
}
DWIN_UpdateLCD();
}
void Draw_PrintDone() {
// show percent bar and value
_percent_done = 100;
_remain_time = 0;
Title.ShowCaption(GET_TEXT_F(MSG_PRINT_DONE));
DWINUI::ClearMainArea();
DWIN_Print_Header(nullptr);
if (sdprint && TERN0(HAS_GCODE_PREVIEW, Preview_Valid())) {
DWIN_ICON_Show(0, 0, 1, 21, 100, 0x00);
DWINUI::Draw_Button(BTN_Continue, 86, 300);
}
else {
Draw_Print_ProgressBar();
Draw_Print_Labels();
DWINUI::Draw_Icon(ICON_PrintTime, 15, 173);
DWINUI::Draw_Icon(ICON_RemainTime, 150, 171);
Draw_Print_ProgressElapsed();
Draw_Print_ProgressRemain();
DWINUI::Draw_Button(BTN_Continue, 86, 273);
}
}
void Goto_PrintDone() {
wait_for_user = true;
if (checkkey != PrintDone) {
checkkey = PrintDone;
Draw_PrintDone();
DWIN_UpdateLCD();
}
}
void Draw_Main_Menu() {
DWINUI::ClearMainArea();
if (HMI_IsChinese())
Title.FrameCopy(2, 2, 26, 13); // "Home" etc
else
Title.ShowCaption(MACHINE_NAME);
DWINUI::Draw_Icon(ICON_LOGO, 71, 52); // CREALITY logo
DWIN_ResetStatusLine();
ICON_Print();
ICON_Prepare();
ICON_Control();
ICON_AdvSettings();
}
void Goto_Main_Menu() {
if (checkkey == MainMenu) return;
checkkey = MainMenu;
Draw_Main_Menu();
DWIN_UpdateLCD();
}
// Draw X, Y, Z and blink if in an un-homed or un-trusted state
void _update_axis_value(const AxisEnum axis, const uint16_t x, const uint16_t y, const bool blink, const bool force) {
const bool draw_qmark = axis_should_home(axis),
draw_empty = NONE(HOME_AFTER_DEACTIVATE, DISABLE_REDUCED_ACCURACY_WARNING) && !draw_qmark && !axis_is_trusted(axis);
// Check for a position change
static xyz_pos_t oldpos = { -1, -1, -1 };
const float p = current_position[axis];
const bool changed = oldpos[axis] != p;
if (changed) oldpos[axis] = p;
if (force || changed || draw_qmark || draw_empty) {
if (blink && draw_qmark)
DWINUI::Draw_String(HMI_data.Coordinate_Color, HMI_data.Background_Color, x, y, F(" - ? -"));
else if (blink && draw_empty)
DWINUI::Draw_String(HMI_data.Coordinate_Color, HMI_data.Background_Color, x, y, F(" "));
else
DWINUI::Draw_Signed_Float(HMI_data.Coordinate_Color, HMI_data.Background_Color, 3, 2, x, y, p);
}
}
void _draw_xyz_position(const bool force) {
//SERIAL_ECHOPGM("Draw XYZ:");
static bool _blink = false;
const bool blink = !!(millis() & 0x400UL);
if (force || blink != _blink) {
_blink = blink;
//SERIAL_ECHOPGM(" (blink)");
_update_axis_value(X_AXIS, 27, 459, blink, true);
_update_axis_value(Y_AXIS, 112, 459, blink, true);
_update_axis_value(Z_AXIS, 197, 459, blink, true);
}
//SERIAL_EOL();
}
void update_variable() {
#if HAS_HOTEND
static celsius_t _hotendtemp = 0, _hotendtarget = 0;
const celsius_t hc = thermalManager.wholeDegHotend(0),
ht = thermalManager.degTargetHotend(0);
const bool _new_hotend_temp = _hotendtemp != hc,
_new_hotend_target = _hotendtarget != ht;
if (_new_hotend_temp) _hotendtemp = hc;
if (_new_hotend_target) _hotendtarget = ht;
#endif
#if HAS_HEATED_BED
static celsius_t _bedtemp = 0, _bedtarget = 0;
const celsius_t bc = thermalManager.wholeDegBed(),
bt = thermalManager.degTargetBed();
const bool _new_bed_temp = _bedtemp != bc,
_new_bed_target = _bedtarget != bt;
if (_new_bed_temp) _bedtemp = bc;
if (_new_bed_target) _bedtarget = bt;
#endif
#if HAS_FAN
static uint8_t _fanspeed = 0;
const bool _new_fanspeed = _fanspeed != thermalManager.fan_speed[0];
if (_new_fanspeed) _fanspeed = thermalManager.fan_speed[0];
#endif
if (checkkey == Menu && (CurrentMenu == TuneMenu || CurrentMenu == TemperatureMenu)) {
// Tune page temperature update
#if HAS_HOTEND
if (_new_hotend_target) HotendTargetItem->redraw();
#endif
#if HAS_HEATED_BED
if (_new_bed_target) BedTargetItem->redraw();
#endif
#if HAS_FAN
if (_new_fanspeed) FanSpeedItem->redraw();
#endif
}
// Bottom temperature update
#if HAS_HOTEND
if (_new_hotend_temp)
DWINUI::Draw_Int(DWIN_FONT_STAT, HMI_data.Indicator_Color, HMI_data.Background_Color, 3, 28, 384, _hotendtemp);
if (_new_hotend_target)
DWINUI::Draw_Int(DWIN_FONT_STAT, HMI_data.Indicator_Color, HMI_data.Background_Color, 3, 25 + 4 * STAT_CHR_W + 6, 384, _hotendtarget);
static int16_t _flow = planner.flow_percentage[0];
if (_flow != planner.flow_percentage[0]) {
_flow = planner.flow_percentage[0];
DWINUI::Draw_Int(DWIN_FONT_STAT, HMI_data.Indicator_Color, HMI_data.Background_Color, 3, 116 + 2 * STAT_CHR_W, 417, _flow);
}
#endif
#if HAS_HEATED_BED
if (_new_bed_temp)
DWINUI::Draw_Int(DWIN_FONT_STAT, HMI_data.Indicator_Color, HMI_data.Background_Color, 3, 28, 417, _bedtemp);
if (_new_bed_target)
DWINUI::Draw_Int(DWIN_FONT_STAT, HMI_data.Indicator_Color, HMI_data.Background_Color, 3, 25 + 4 * STAT_CHR_W + 6, 417, _bedtarget);
#endif
static int16_t _feedrate = 100;
if (_feedrate != feedrate_percentage) {
_feedrate = feedrate_percentage;
DWINUI::Draw_Int(DWIN_FONT_STAT, HMI_data.Indicator_Color, HMI_data.Background_Color, 3, 116 + 2 * STAT_CHR_W, 384, _feedrate);
}
#if HAS_FAN
if (_new_fanspeed) {
_fanspeed = thermalManager.fan_speed[0];
DWINUI::Draw_Int(DWIN_FONT_STAT, HMI_data.Indicator_Color, HMI_data.Background_Color, 3, 195 + 2 * STAT_CHR_W, 384, _fanspeed);
}
#endif
static float _offset = 0;
if (BABY_Z_VAR != _offset) {
_offset = BABY_Z_VAR;
DWINUI::Draw_Signed_Float(DWIN_FONT_STAT, HMI_data.Indicator_Color, HMI_data.Background_Color, 2, 2, 204, 417, _offset);
}
#if HAS_MESH
static bool _leveling_active = false;
if (_leveling_active != planner.leveling_active) {
_leveling_active = planner.leveling_active;
DWIN_Draw_Box(1, HMI_data.Background_Color, 186, 416, 20, 20);
if (_leveling_active)
DWINUI::Draw_Icon(ICON_SetZOffset, 186, 416);
else
DWINUI::Draw_Icon(ICON_Zoffset, 187, 416);
}
#else
DWINUI::Draw_Icon(ICON_Zoffset, 187, 416);
#endif
_draw_xyz_position(false);
}
/**
* Read and cache the working directory.
*
* TODO: New code can follow the pattern of menu_media.cpp
* and rely on Marlin caching for performance. No need to
* cache files here.
*/
#ifndef strcasecmp_P
#define strcasecmp_P(a, b) strcasecmp((a), (b))
#endif
void make_name_without_ext(char *dst, char *src, size_t maxlen=MENU_CHAR_LIMIT) {
size_t pos = strlen(src); // index of ending nul
// For files, remove the extension
// which may be .gcode, .gco, or .g
if (!card.flag.filenameIsDir)
while (pos && src[pos] != '.') pos--; // find last '.' (stop at 0)
if (!pos) pos = strlen(src); // pos = 0 ('.' not found) restore pos
size_t len = pos; // nul or '.'
if (len > maxlen) { // Keep the name short
pos = len = maxlen; // move nul down
dst[--pos] = '.'; // insert dots
dst[--pos] = '.';
dst[--pos] = '.';
}
dst[len] = '\0'; // end it
// Copy down to 0
while (pos--) dst[pos] = src[pos];
}
void HMI_SDCardInit() { card.cdroot(); }
#if ENABLED(SCROLL_LONG_FILENAMES)
char shift_name[LONG_FILENAME_LENGTH + 1];
int8_t shift_amt; // = 0
millis_t shift_ms; // = 0
// Init the shift name based on the highlighted item
void Init_Shift_Name() {
const bool is_subdir = !card.flag.workDirIsRoot;
const int8_t filenum = select_file.now - 1 - is_subdir; // Skip "Back" and ".."
const uint16_t fileCnt = card.get_num_Files();
if (WITHIN(filenum, 0, fileCnt - 1)) {
card.getfilename_sorted(SD_ORDER(filenum, fileCnt));
char * const name = card.longest_filename();
make_name_without_ext(shift_name, name, 100);
}
}
void Init_SDItem_Shift() {
shift_amt = 0;
shift_ms = select_file.now > 0 && strlen(shift_name) > MENU_CHAR_LIMIT ? millis() + 750UL : 0;
}
#endif
/**
* Display an SD item, adding a CDUP for subfolders.
*/
void Draw_SDItem(const uint16_t item, int16_t row=-1) {
if (row < 0) row = item + 1 + MROWS - index_file;
const bool is_subdir = !card.flag.workDirIsRoot;
if (is_subdir && item == 0)
return Draw_Menu_Line(row, ICON_Folder, "..");
card.getfilename_sorted(SD_ORDER(item - is_subdir, card.get_num_Files()));
char * const name = card.longest_filename();
#if ENABLED(SCROLL_LONG_FILENAMES)
// Init the current selected name
// This is used during scroll drawing
if (item == select_file.now - 1) {
make_name_without_ext(shift_name, name, 100);
Init_SDItem_Shift();
}
#endif
// Draw the file/folder with name aligned left
char str[strlen(name) + 1];
make_name_without_ext(str, name);
const uint8_t icon = card.flag.filenameIsDir ? ICON_Folder : card.fileIsBinary() ? ICON_Binary : ICON_File;
Draw_Menu_Line(row, icon, str);
}
#if ENABLED(SCROLL_LONG_FILENAMES)
void Draw_SDItem_Shifted(uint8_t &shift) {
// Limit to the number of chars past the cutoff
const size_t len = strlen(shift_name);
NOMORE(shift, _MAX(len - MENU_CHAR_LIMIT, 0U));
// Shorten to the available space
const size_t lastchar = _MIN((signed)len, shift + MENU_CHAR_LIMIT);
const char c = shift_name[lastchar];
shift_name[lastchar] = '\0';
const uint8_t row = select_file.now + MROWS - index_file; // skip "Back" and scroll
Erase_Menu_Text(row);
Draw_Menu_Line(row, 0, &shift_name[shift]);
shift_name[lastchar] = c;
}
#endif
// Redraw the first set of SD Files
void Redraw_SD_List() {
select_file.reset();
index_file = MROWS;
DWINUI::ClearMainArea(); // Leave title bar unchanged
Draw_Back_First();
if (card.isMounted()) {
// As many files as will fit
LOOP_L_N(i, _MIN(nr_sd_menu_items(), MROWS))
Draw_SDItem(i, i + 1);
TERN_(SCROLL_LONG_FILENAMES, Init_SDItem_Shift());
}
else {
DWIN_Draw_Rectangle(1, HMI_data.AlertBg_Color, 10, MBASE(3) - 10, DWIN_WIDTH - 10, MBASE(4));
DWINUI::Draw_CenteredString(font12x24, HMI_data.AlertTxt_Color, MBASE(3), GET_TEXT_F(MSG_MEDIA_NOT_INSERTED));
}
}
bool DWIN_lcd_sd_status = false;
void SDCard_Up() {
card.cdup();
Redraw_SD_List();
DWIN_lcd_sd_status = false; // On next DWIN_Update
}
void SDCard_Folder(char * const dirname) {
card.cd(dirname);
Redraw_SD_List();
DWIN_lcd_sd_status = false; // On next DWIN_Update
}
//
// Watch for media mount / unmount
//
void HMI_SDCardUpdate() {
if (HMI_flag.home_flag) return;
if (DWIN_lcd_sd_status != card.isMounted()) {
DWIN_lcd_sd_status = card.isMounted();
//SERIAL_ECHOLNPGM("HMI_SDCardUpdate: ", DWIN_lcd_sd_status);
if (DWIN_lcd_sd_status) { // Media inserted
if (checkkey == SelectFile)
Redraw_SD_List();
}
else { // Media removed
// clean file icon
if (checkkey == SelectFile) {
Redraw_SD_List();
}
else if (sdprint && card.isPrinting() && printingIsActive()) {
wait_for_heatup = wait_for_user = false;
HMI_flag.abort_flag = true; // Abort print
}
}
DWIN_UpdateLCD();
}
}
//
// The Dashboard is always on-screen, except during
// full-screen modal dialogs.
//
void DWIN_Draw_Dashboard() {
DWIN_Draw_Rectangle(1, HMI_data.Background_Color, 0, STATUS_Y + 21, DWIN_WIDTH, DWIN_HEIGHT - 1);
#if HAS_HOTEND
DWINUI::Draw_Icon(ICON_HotendTemp, 10, 383);
DWINUI::Draw_Int(DWIN_FONT_STAT, HMI_data.Indicator_Color, HMI_data.Background_Color, 3, 28, 384, thermalManager.wholeDegHotend(0));
DWINUI::Draw_String(DWIN_FONT_STAT, HMI_data.Indicator_Color, HMI_data.Background_Color, 25 + 3 * STAT_CHR_W + 5, 384, F("/"));
DWINUI::Draw_Int(DWIN_FONT_STAT, HMI_data.Indicator_Color, HMI_data.Background_Color, 3, 25 + 4 * STAT_CHR_W + 6, 384, thermalManager.degTargetHotend(0));
DWINUI::Draw_Icon(ICON_StepE, 112, 417);
DWINUI::Draw_Int(DWIN_FONT_STAT, HMI_data.Indicator_Color, HMI_data.Background_Color, 3, 116 + 2 * STAT_CHR_W, 417, planner.flow_percentage[0]);
DWINUI::Draw_String(DWIN_FONT_STAT, HMI_data.Indicator_Color, HMI_data.Background_Color, 116 + 5 * STAT_CHR_W + 2, 417, F("%"));
#endif
#if HAS_HEATED_BED
DWINUI::Draw_Icon(ICON_BedTemp, 10, 416);
DWINUI::Draw_Int(DWIN_FONT_STAT, HMI_data.Indicator_Color, HMI_data.Background_Color, 3, 28, 417, thermalManager.wholeDegBed());
DWINUI::Draw_String(DWIN_FONT_STAT, HMI_data.Indicator_Color, HMI_data.Background_Color, 25 + 3 * STAT_CHR_W + 5, 417, F("/"));
DWINUI::Draw_Int(DWIN_FONT_STAT, HMI_data.Indicator_Color, HMI_data.Background_Color, 3, 25 + 4 * STAT_CHR_W + 6, 417, thermalManager.degTargetBed());
#endif
DWINUI::Draw_Icon(ICON_Speed, 113, 383);
DWINUI::Draw_Int(DWIN_FONT_STAT, HMI_data.Indicator_Color, HMI_data.Background_Color, 3, 116 + 2 * STAT_CHR_W, 384, feedrate_percentage);
DWINUI::Draw_String(DWIN_FONT_STAT, HMI_data.Indicator_Color, HMI_data.Background_Color, 116 + 5 * STAT_CHR_W + 2, 384, F("%"));
#if HAS_FAN
DWINUI::Draw_Icon(ICON_FanSpeed, 187, 383);
DWINUI::Draw_Int(DWIN_FONT_STAT, HMI_data.Indicator_Color, HMI_data.Background_Color, 3, 195 + 2 * STAT_CHR_W, 384, thermalManager.fan_speed[0]);
#endif
#if HAS_ZOFFSET_ITEM
DWINUI::Draw_Icon(planner.leveling_active ? ICON_SetZOffset : ICON_Zoffset, 187, 416);
#endif
DWINUI::Draw_Signed_Float(DWIN_FONT_STAT, HMI_data.Indicator_Color, HMI_data.Background_Color, 2, 2, 204, 417, BABY_Z_VAR);
DWIN_Draw_Rectangle(1, HMI_data.SplitLine_Color, 0, 449, DWIN_WIDTH, 451);
DWINUI::Draw_Icon(ICON_MaxSpeedX, 10, 456);
DWINUI::Draw_Icon(ICON_MaxSpeedY, 95, 456);
DWINUI::Draw_Icon(ICON_MaxSpeedZ, 180, 456);
_draw_xyz_position(true);
}
void Draw_Info_Menu() {
DWINUI::ClearMainArea();
Draw_Back_First();
if (HMI_IsChinese())
Title.FrameCopy(30, 17, 28, 13); // "Info"
else
Title.ShowCaption(GET_TEXT_F(MSG_INFO_SCREEN));
if (HMI_IsChinese()) {
DWIN_Frame_AreaCopy(1, 197, 149, 252, 161, 108, 102); // "Size"
DWIN_Frame_AreaCopy(1, 1, 164, 56, 176, 108, 175); // "Firmware Version"
DWIN_Frame_AreaCopy(1, 58, 164, 113, 176, 105, 248); // "Contact Details"
DWINUI::Draw_CenteredString(268, F(CORP_WEBSITE));
}
else {
DWINUI::Draw_CenteredString(102, F("Size"));
DWINUI::Draw_CenteredString(175, F("Firmware version"));
DWINUI::Draw_CenteredString(248, F("Build Datetime"));
DWINUI::Draw_CenteredString(268, F(STRING_DISTRIBUTION_DATE));
}
DWINUI::Draw_CenteredString(122, F(MACHINE_SIZE));
DWINUI::Draw_CenteredString(195, F(SHORT_BUILD_VERSION));
LOOP_L_N(i, 3) {
DWINUI::Draw_Icon(ICON_PrintSize + i, ICOX, 99 + i * 73);
DWIN_Draw_HLine(HMI_data.SplitLine_Color, 16, MBASE(2) + i * 73, 240);
}
}
void Draw_Print_File_Menu() {
if (HMI_IsChinese())
Title.FrameCopy(0, 31, 56, 14); // "Print file"
else
Title.ShowCaption(GET_TEXT_F(MSG_MEDIA_MENU));
Redraw_SD_List();
TERN_(DASH_REDRAW, DWIN_RedrawDash());
}
// Main Process
void HMI_MainMenu() {
EncoderState encoder_diffState = get_encoder_state();
if (encoder_diffState == ENCODER_DIFF_NO) return;
if (encoder_diffState == ENCODER_DIFF_CW) {
if (select_page.inc(PAGE_COUNT)) {
switch (select_page.now) {
case PAGE_PRINT: ICON_Print(); break;
case PAGE_PREPARE: ICON_Print(); ICON_Prepare(); break;
case PAGE_CONTROL: ICON_Prepare(); ICON_Control(); break;
case PAGE_ADVANCE: ICON_Control(); ICON_AdvSettings(); break;
}
}
}
else if (encoder_diffState == ENCODER_DIFF_CCW) {
if (select_page.dec()) {
switch (select_page.now) {
case PAGE_PRINT: ICON_Print(); ICON_Prepare(); break;
case PAGE_PREPARE: ICON_Prepare(); ICON_Control(); break;
case PAGE_CONTROL: ICON_Control(); ICON_AdvSettings(); break;
case PAGE_ADVANCE: ICON_AdvSettings(); break;
}
}
}
else if (encoder_diffState == ENCODER_DIFF_ENTER) {
switch (select_page.now) {
case PAGE_PRINT:
checkkey = SelectFile;
card.mount();
safe_delay(300);
Draw_Print_File_Menu();
break;
case PAGE_PREPARE: Draw_Prepare_Menu(); break;
case PAGE_CONTROL: Draw_Control_Menu(); break;
case PAGE_ADVANCE: Draw_AdvancedSettings_Menu(); break;
}
}
DWIN_UpdateLCD();
}
// Select (and Print) File
void HMI_SelectFile() {
EncoderState encoder_diffState = get_encoder_state();
const uint16_t hasUpDir = !card.flag.workDirIsRoot;
if (encoder_diffState == ENCODER_DIFF_NO) {
#if ENABLED(SCROLL_LONG_FILENAMES)
if (shift_ms && select_file.now >= 1 + hasUpDir) {
// Scroll selected filename every second
const millis_t ms = millis();
if (ELAPSED(ms, shift_ms)) {
const bool was_reset = shift_amt < 0;
shift_ms = ms + 375UL + was_reset * 250UL; // ms per character
uint8_t shift_new = shift_amt + 1; // Try to shift by...
Draw_SDItem_Shifted(shift_new); // Draw the item
if (!was_reset && shift_new == 0) // Was it limited to 0?
shift_ms = 0; // No scrolling needed
else if (shift_new == shift_amt) // Scroll reached the end
shift_new = -1; // Reset
shift_amt = shift_new; // Set new scroll
}
}
#endif
return;
}
// First pause is long. Easy.
// On reset, long pause must be after 0.
const uint16_t fullCnt = nr_sd_menu_items();
if (encoder_diffState == ENCODER_DIFF_CW && fullCnt) {
if (select_file.inc(1 + fullCnt)) {
const uint8_t itemnum = select_file.now - 1; // -1 for "Back"
if (TERN0(SCROLL_LONG_FILENAMES, shift_ms)) { // If line was shifted
Erase_Menu_Text(itemnum + MROWS - index_file); // Erase and
Draw_SDItem(itemnum - 1); // redraw
}
if (select_file.now > MROWS && select_file.now > index_file) { // Cursor past the bottom
index_file = select_file.now; // New bottom line
Scroll_Menu(DWIN_SCROLL_UP);
Draw_SDItem(itemnum, MROWS); // Draw and init the shift name
}
else {
Move_Highlight(1, select_file.now + MROWS - index_file); // Just move highlight
TERN_(SCROLL_LONG_FILENAMES, Init_Shift_Name()); // ...and init the shift name
}
TERN_(SCROLL_LONG_FILENAMES, Init_SDItem_Shift());
}
}
else if (encoder_diffState == ENCODER_DIFF_CCW && fullCnt) {
if (select_file.dec()) {
const uint8_t itemnum = select_file.now - 1; // -1 for "Back"
if (TERN0(SCROLL_LONG_FILENAMES, shift_ms)) { // If line was shifted
Erase_Menu_Text(select_file.now + 1 + MROWS - index_file); // Erase and
Draw_SDItem(itemnum + 1); // redraw
}
if (select_file.now < index_file - MROWS) { // Cursor past the top
index_file--; // New bottom line
Scroll_Menu(DWIN_SCROLL_DOWN);
if (index_file == MROWS) {
Draw_Back_First();
TERN_(SCROLL_LONG_FILENAMES, shift_ms = 0);
}
else {
Draw_SDItem(itemnum, 0); // Draw the item (and init shift name)
}
}
else {
Move_Highlight(-1, select_file.now + MROWS - index_file); // Just move highlight
TERN_(SCROLL_LONG_FILENAMES, Init_Shift_Name()); // ...and init the shift name
}
TERN_(SCROLL_LONG_FILENAMES, Init_SDItem_Shift()); // Reset left. Init timer.
}
}
else if (encoder_diffState == ENCODER_DIFF_ENTER) {
if (select_file.now == 0) { // Back
select_page.set(PAGE_PRINT);
return Goto_Main_Menu();
}
else if (hasUpDir && select_file.now == 1) { // CD-Up
SDCard_Up();
goto HMI_SelectFileExit;
}
else {
const uint16_t filenum = select_file.now - 1 - hasUpDir;
card.getfilename_sorted(SD_ORDER(filenum, card.get_num_Files()));
// Enter that folder!
if (card.flag.filenameIsDir) {
SDCard_Folder(card.filename);
goto HMI_SelectFileExit;
}
// Reset highlight for next entry
select_print.reset();
select_file.reset();
// Start choice and print SD file
HMI_flag.heat_flag = true;
HMI_flag.print_finish = false;
if (card.fileIsBinary())
return DWIN_Popup_Confirm(ICON_Error, F("Please check filenames"), F("Only G-code can be printed"));
else
return Goto_ConfirmToPrint();
}
}
HMI_SelectFileExit:
DWIN_UpdateLCD();
}
// Pause or Stop popup
void onClick_PauseOrStop() {
switch (select_print.now) {
case PRINT_PAUSE_RESUME: if (HMI_flag.select_flag) HMI_flag.pause_flag = true; break; // confirm pause
case PRINT_STOP: if (HMI_flag.select_flag) HMI_flag.abort_flag = true; break; // stop confirmed then abort print
default: break;
}
return Goto_PrintProcess();
}
// Printing
void HMI_Printing() {
EncoderState encoder_diffState = get_encoder_state();
if (encoder_diffState == ENCODER_DIFF_NO) return;
// Avoid flicker by updating only the previous menu
if (encoder_diffState == ENCODER_DIFF_CW) {
if (select_print.inc(PRINT_COUNT)) {
switch (select_print.now) {
case PRINT_SETUP: ICON_Tune(); break;
case PRINT_PAUSE_RESUME: ICON_Tune(); ICON_ResumeOrPause(); break;
case PRINT_STOP: ICON_ResumeOrPause(); ICON_Stop(); break;
}
}
}
else if (encoder_diffState == ENCODER_DIFF_CCW) {
if (select_print.dec()) {
switch (select_print.now) {
case PRINT_SETUP: ICON_Tune(); ICON_ResumeOrPause(); break;
case PRINT_PAUSE_RESUME: ICON_ResumeOrPause(); ICON_Stop(); break;
case PRINT_STOP: ICON_Stop(); break;
}
}
}
else if (encoder_diffState == ENCODER_DIFF_ENTER) {
switch (select_print.now) {
case PRINT_SETUP: Draw_Tune_Menu(); break;
case PRINT_PAUSE_RESUME:
if (printingIsPaused()) { // if printer is already in pause
ui.resume_print();
break;
}
else
return Goto_Popup(Popup_window_PauseOrStop, onClick_PauseOrStop);
case PRINT_STOP:
return Goto_Popup(Popup_window_PauseOrStop, onClick_PauseOrStop);
default: break;
}
}
DWIN_UpdateLCD();
}
#include "../../../libs/buzzer.h"
void Draw_Main_Area() {
switch (checkkey) {
case MainMenu: Draw_Main_Menu(); break;
case SelectFile: Draw_Print_File_Menu(); break;
case PrintProcess: Draw_PrintProcess(); break;
case PrintDone: Draw_PrintDone(); break;
#if HAS_ESDIAG
case ESDiagProcess: Draw_EndStopDiag(); break;
#endif
case Popup: popupDraw(); break;
#if HAS_LOCKSCREEN
case Locked: lockScreen.draw(); break;
#endif
case Menu:
case SetInt:
case SetPInt:
case SetIntNoDraw:
case SetFloat:
case SetPFloat: ReDrawMenu(true); break;
default: break;
}
}
void HMI_ReturnScreen() {
checkkey = last_checkkey;
wait_for_user = false;
Draw_Main_Area();
}
void HMI_WaitForUser() {
get_encoder_state();
if (!wait_for_user) {
switch (checkkey) {
case PrintDone:
select_page.reset();
Goto_Main_Menu();
break;
TERN_(HAS_ONESTEP_LEVELING, case Leveling:)
default: HMI_ReturnScreen(); break;
}
}
}
void HMI_Init() {
DWINUI::Draw_Box(1, Color_Black, {5, 220, DWIN_WIDTH-5, DWINUI::fontHeight()});
DWINUI::Draw_CenteredString(Color_White, 220, F("Professional Firmware "));
for (uint16_t t = 0; t <= 100; t += 2) {
DWINUI::Draw_Icon(ICON_Bar, 15, 260);
DWIN_Draw_Rectangle(1, HMI_data.Background_Color, 15 + t * 242 / 100, 260, 257, 280);
DWIN_UpdateLCD();
delay(20);
}
HMI_SetLanguage();
}
void EachMomentUpdate() {
static millis_t next_var_update_ms = 0, next_rts_update_ms = 0, next_status_update_ms = 0;
const millis_t ms = millis();
if (ELAPSED(ms, next_var_update_ms)) {
next_var_update_ms = ms + DWIN_VAR_UPDATE_INTERVAL;
update_variable();
#if HAS_ESDIAG
if (checkkey == ESDiagProcess) ESDiag.Update();
#endif
#if HAS_PIDPLOT
if (checkkey == PidProcess) Plot.Update((HMI_value.pidresult == PID_EXTR_START) ? thermalManager.wholeDegHotend(0) : thermalManager.wholeDegBed());
#endif
}
#if HAS_STATUS_MESSAGE_TIMEOUT
bool did_expire = ui.status_reset_callback && (*ui.status_reset_callback)();
did_expire |= ui.status_message_expire_ms && ELAPSED(ms, ui.status_message_expire_ms);
if (did_expire) ui.reset_status();
#endif
if (ELAPSED(ms, next_status_update_ms)) {
next_status_update_ms = ms + 500;
DWIN_DrawStatusMessage();
}
if (PENDING(ms, next_rts_update_ms)) return;
next_rts_update_ms = ms + DWIN_SCROLL_UPDATE_INTERVAL;
if (checkkey == PrintProcess) { // print process
// Print pause
if (HMI_flag.pause_flag && !HMI_flag.home_flag) {
HMI_flag.pause_flag = false;
if (!HMI_flag.pause_action) {
HMI_flag.pause_action = true;
return ui.pause_print();
}
}
// if print done
if (HMI_flag.print_finish && !HMI_flag.home_flag) {
HMI_flag.print_finish = false;
return DWIN_Print_Finished();
}
// if print was aborted
if (HMI_flag.abort_flag && !HMI_flag.home_flag) { // Print Stop
HMI_flag.abort_flag = false;
if (!HMI_flag.abort_action) {
HMI_flag.abort_action = true;
ui.abort_print();
return Goto_PrintDone();
}
}
duration_t elapsed = print_job_timer.duration(); // print timer
if (sdprint && card.isPrinting() && !HMI_flag.percent_flag) {
uint8_t percentDone = card.percentDone();
if (_percent_done != percentDone) { // print percent
_percent_done = percentDone;
Draw_Print_ProgressBar();
}
// Estimate remaining time every 20 seconds
static millis_t next_remain_time_update = 0;
if (_percent_done > 1 && ELAPSED(ms, next_remain_time_update) && !HMI_flag.heat_flag && !HMI_flag.remain_flag) {
_remain_time = (elapsed.value - dwin_heat_time) / (_percent_done * 0.01f) - (elapsed.value - dwin_heat_time);
next_remain_time_update += DWIN_REMAIN_TIME_UPDATE_INTERVAL;
Draw_Print_ProgressRemain();
}
}
// Print time so far
static uint16_t last_Printtime = 0;
const uint16_t min = (elapsed.value % 3600) / 60;
if (last_Printtime != min) { // 1 minute update
last_Printtime = min;
Draw_Print_ProgressElapsed();
}
}
#if ENABLED(POWER_LOSS_RECOVERY)
else if (DWIN_lcd_sd_status && recovery.dwin_flag) { // resume print before power off
return Goto_PowerLossRecovery();
}
#endif // POWER_LOSS_RECOVERY
DWIN_UpdateLCD();
}
#if ENABLED(POWER_LOSS_RECOVERY)
void Popup_PowerLossRecovery() {
DWINUI::ClearMainArea();
Draw_Popup_Bkgd();
if (HMI_IsChinese()) {
DWIN_Frame_AreaCopy(1, 160, 338, 235, 354, 98, 115);
DWIN_Frame_AreaCopy(1, 103, 321, 271, 335, 52, 167);
DWINUI::Draw_IconWB(ICON_Cancel_C, 26, 280);
DWINUI::Draw_IconWB(ICON_Continue_C, 146, 280);
}
else {
DWINUI::Draw_CenteredString(HMI_data.PopupTxt_Color, 70, GET_TEXT_F(MSG_OUTAGE_RECOVERY));
DWINUI::Draw_CenteredString(HMI_data.PopupTxt_Color, 147, F("It looks like the last"));
DWINUI::Draw_CenteredString(HMI_data.PopupTxt_Color, 167, F("file was interrupted."));
DWINUI::Draw_Button(BTN_Cancel, 26, 280);
DWINUI::Draw_Button(BTN_Continue, 146, 280);
}
SdFile *dir = nullptr;
const char * const filename = card.diveToFile(true, dir, recovery.info.sd_filename);
card.selectFileByName(filename);
DWINUI::Draw_CenteredString(HMI_data.PopupTxt_Color, 207, card.longest_filename());
Draw_Select_Highlight(HMI_flag.select_flag);
DWIN_UpdateLCD();
}
void onClick_PowerLossRecovery() {
if (HMI_flag.select_flag) {
queue.inject(F("M1000C"));
select_page.reset();
return Goto_Main_Menu();
}
else {
select_print.set(PRINT_SETUP);
queue.inject(F("M1000"));
sdprint = true;
return Goto_PrintProcess();
}
}
void Goto_PowerLossRecovery() {
recovery.dwin_flag = false;
LCD_MESSAGE(MSG_CONTINUE_PRINT_JOB);
Goto_Popup(Popup_PowerLossRecovery, onClick_PowerLossRecovery);
}
#endif // POWER_LOSS_RECOVERY
void DWIN_HandleScreen() {
switch (checkkey) {
case MainMenu: HMI_MainMenu(); break;
case Menu: HMI_Menu(); break;
case SetInt: HMI_SetInt(); break;
case SetPInt: HMI_SetPInt(); break;
case SetIntNoDraw: HMI_SetIntNoDraw(); break;
case SetFloat: HMI_SetFloat(); break;
case SetPFloat: HMI_SetPFloat(); break;
case SelectFile: HMI_SelectFile(); break;
case PrintProcess: HMI_Printing(); break;
case Popup: HMI_Popup(); break;
case Leveling: break;
#if HAS_LOCKSCREEN
case Locked: HMI_LockScreen(); break;
#endif
case PrintDone:
TERN_(HAS_ESDIAG, case ESDiagProcess:)
case WaitResponse: HMI_WaitForUser(); break;
case Homing:
case PidProcess:
case NothingToDo: break;
default: break;
}
}
bool IDisPopUp() { // If ID is popup...
return (checkkey == NothingToDo)
|| (checkkey == WaitResponse)
|| (checkkey == Homing)
|| (checkkey == Leveling)
|| (checkkey == PidProcess)
|| TERN0(HAS_ESDIAG, (checkkey == ESDiagProcess))
|| (checkkey == Popup);
}
void HMI_SaveProcessID(const uint8_t id) {
if (checkkey != id) {
if (!IDisPopUp()) last_checkkey = checkkey; // if previous is not a popup
if ((id == Popup)
|| TERN0(HAS_ESDIAG, (id == ESDiagProcess))
|| (id == PrintDone)
|| (id == Leveling)
|| (id == WaitResponse)) wait_for_user = true;
checkkey = id;
}
}
void DWIN_HomingStart() {
HMI_flag.home_flag = true;
HMI_SaveProcessID(Homing);
Title.ShowCaption(GET_TEXT_F(MSG_HOMING));
DWIN_Show_Popup(ICON_BLTouch, GET_TEXT_F(MSG_HOMING), GET_TEXT_F(MSG_PLEASE_WAIT));
}
void DWIN_HomingDone() {
HMI_flag.home_flag = false;
#if ENABLED(MESH_BED_LEVELING) && EITHER(BABYSTEP_ZPROBE_OFFSET, JUST_BABYSTEP)
planner.synchronize();
babystep.add_mm(Z_AXIS, HMI_data.ManualZOffset);
#endif
if (HMI_flag.abort_action) DWIN_Print_Aborted(); else HMI_ReturnScreen();
}
void DWIN_LevelingStart() {
#if HAS_ONESTEP_LEVELING
HMI_SaveProcessID(Leveling);
Title.ShowCaption(GET_TEXT_F(MSG_BED_LEVELING));
DWIN_Show_Popup(ICON_AutoLeveling, GET_TEXT_F(MSG_BED_LEVELING), GET_TEXT_F(MSG_PLEASE_WAIT));
#if BOTH(AUTO_BED_LEVELING_UBL, PREHEAT_BEFORE_LEVELING)
#if HAS_HOTEND
if (thermalManager.degTargetHotend(0) < LEVELING_NOZZLE_TEMP)
thermalManager.setTargetHotend(LEVELING_NOZZLE_TEMP, 0);
#endif
#if HAS_HEATED_BED
if (thermalManager.degTargetBed() < HMI_data.BedLevT)
thermalManager.setTargetBed(HMI_data.BedLevT);
#endif
TERN_(HAS_HOTEND, thermalManager.wait_for_hotend(0));
TERN_(HAS_HEATED_BED, thermalManager.wait_for_bed_heating());
#endif
#elif ENABLED(MESH_BED_LEVELING)
Draw_ManualMesh_Menu();
#endif
}
void DWIN_LevelingDone() {
TERN_(HAS_MESH, Goto_MeshViewer());
}
#if HAS_MESH
void DWIN_MeshUpdate(const int8_t xpos, const int8_t ypos, const_float_t zval) {
char msg[33] = "";
char str_1[6] = "";
sprintf_P(msg, PSTR(S_FMT " %i/%i Z=%s"), GET_TEXT(MSG_PROBING_POINT), xpos, ypos, dtostrf(zval, 1, 2, str_1));
ui.set_status(msg);
}
#endif
// PID process
#if HAS_PIDPLOT
void DWIN_Draw_PIDPopup() {
frame_rect_t gfrm = {40, 180, DWIN_WIDTH - 80, 120};
DWINUI::ClearMainArea();
Draw_Popup_Bkgd();
DWINUI::Draw_CenteredString(HMI_data.PopupTxt_Color, 100, GET_TEXT_F(MSG_PID_AUTOTUNE));
DWINUI::Draw_String(HMI_data.PopupTxt_Color, gfrm.x, gfrm.y - DWINUI::fontHeight() - 4, F("PID target: Celsius"));
switch (HMI_value.pidresult) {
case PID_EXTR_START:
DWINUI::Draw_CenteredString(HMI_data.PopupTxt_Color, 120, F("for Nozzle is running."));
Plot.Draw(gfrm, thermalManager.hotend_maxtemp[0], HMI_data.HotendPidT);
DWINUI::Draw_Int(HMI_data.PopupTxt_Color, 3, gfrm.x + 90, gfrm.y - DWINUI::fontHeight() - 4, HMI_data.HotendPidT);
break;
case PID_BED_START:
DWINUI::Draw_CenteredString(HMI_data.PopupTxt_Color, 120, F("for BED is running."));
Plot.Draw(gfrm, BED_MAXTEMP, HMI_data.BedPidT);
DWINUI::Draw_Int(HMI_data.PopupTxt_Color, 3, gfrm.x + 90, gfrm.y - DWINUI::fontHeight() - 4, HMI_data.BedPidT);
break;
default:
break;
}
}
#endif
void DWIN_PidTuning(pidresult_t result) {
HMI_value.pidresult = result;
switch (result) {
case PID_BED_START:
HMI_SaveProcessID(PidProcess);
#if HAS_PIDPLOT
DWIN_Draw_PIDPopup();
#else
DWIN_Draw_Popup(ICON_TempTooHigh, GET_TEXT_F(MSG_PID_AUTOTUNE), F("for BED is running."));
#endif
break;
case PID_EXTR_START:
HMI_SaveProcessID(PidProcess);
#if HAS_PIDPLOT
DWIN_Draw_PIDPopup();
#else
DWIN_Draw_Popup(ICON_TempTooHigh, GET_TEXT_F(MSG_PID_AUTOTUNE), F("for Nozzle is running."));
#endif
break;
case PID_BAD_EXTRUDER_NUM:
checkkey = last_checkkey;
DWIN_Popup_Confirm(ICON_TempTooLow, GET_TEXT_F(MSG_PID_AUTOTUNE_FAILED), GET_TEXT_F(MSG_BAD_EXTRUDER_NUM));
break;
case PID_TUNING_TIMEOUT:
checkkey = last_checkkey;
DWIN_Popup_Confirm(ICON_TempTooHigh, GET_TEXT_F(MSG_ERROR), GET_TEXT_F(MSG_PID_TIMEOUT));
break;
case PID_TEMP_TOO_HIGH:
checkkey = last_checkkey;
DWIN_Popup_Confirm(ICON_TempTooHigh, GET_TEXT_F(MSG_PID_AUTOTUNE_FAILED), GET_TEXT_F(MSG_TEMP_TOO_HIGH));
break;
case PID_DONE:
checkkey = last_checkkey;
DWIN_Popup_Confirm(ICON_TempTooLow, GET_TEXT_F(MSG_PID_AUTOTUNE), GET_TEXT_F(MSG_BUTTON_DONE));
break;
default:
checkkey = last_checkkey;
break;
}
}
// Started a Print Job
void DWIN_Print_Started(const bool sd) {
sdprint = IS_SD_PRINTING() || sd;
_percent_done = 0;
_remain_time = 0;
HMI_flag.percent_flag = false;
HMI_flag.remain_flag = false;
HMI_flag.pause_flag = false;
HMI_flag.pause_action = false;
HMI_flag.abort_flag = false;
HMI_flag.abort_action = false;
HMI_flag.print_finish = false;
Goto_PrintProcess();
}
// Pause a print job
void DWIN_Print_Pause() {
ICON_ResumeOrPause();
}
// Resume print job
void DWIN_Print_Resume() {
HMI_flag.pause_action = false;
ICON_ResumeOrPause();
if (printJobOngoing()) {
LCD_MESSAGE(MSG_RESUME_PRINT);
Goto_PrintProcess();
}
}
// Ended print job
void DWIN_Print_Finished() {
if (HMI_flag.abort_flag || checkkey == PrintDone) return;
TERN_(POWER_LOSS_RECOVERY, if (card.isPrinting()) recovery.cancel());
HMI_flag.pause_flag = false;
wait_for_heatup = false;
planner.finish_and_disable();
thermalManager.cooldown();
Goto_PrintDone();
}
// Print was aborted
void DWIN_Print_Aborted() {
TERN_(DEBUG_DWIN, SERIAL_ECHOLNPGM("DWIN_Print_Aborted"));
HMI_flag.abort_action = false;
wait_for_heatup = false;
planner.finish_and_disable();
thermalManager.cooldown();
Goto_PrintDone();
}
// Progress and remaining time update
void DWIN_M73() {
if (parser.seenval('P')) {
_percent_done = parser.value_byte();
HMI_flag.percent_flag = true;
}
if (parser.seenval('R')) {
_remain_time = parser.value_ulong() * 60;
HMI_flag.remain_flag = true;
}
if (checkkey == PrintProcess) {
Draw_Print_ProgressBar();
Draw_Print_ProgressRemain();
Draw_Print_ProgressElapsed();
}
}
#if HAS_FILAMENT_SENSOR
// Filament Runout process
void DWIN_FilamentRunout(const uint8_t extruder) { LCD_MESSAGE(MSG_RUNOUT_SENSOR); }
#endif
void DWIN_SetColorDefaults() {
HMI_data.Background_Color = Def_Background_Color;
HMI_data.Cursor_color = Def_Cursor_color;
HMI_data.TitleBg_color = Def_TitleBg_color;
HMI_data.TitleTxt_color = Def_TitleTxt_color;
HMI_data.Text_Color = Def_Text_Color;
HMI_data.Selected_Color = Def_Selected_Color;
HMI_data.SplitLine_Color = Def_SplitLine_Color;
HMI_data.Highlight_Color = Def_Highlight_Color;
HMI_data.StatusBg_Color = Def_StatusBg_Color;
HMI_data.StatusTxt_Color = Def_StatusTxt_Color;
HMI_data.PopupBg_color = Def_PopupBg_color;
HMI_data.PopupTxt_Color = Def_PopupTxt_Color;
HMI_data.AlertBg_Color = Def_AlertBg_Color;
HMI_data.AlertTxt_Color = Def_AlertTxt_Color;
HMI_data.PercentTxt_Color = Def_PercentTxt_Color;
HMI_data.Barfill_Color = Def_Barfill_Color;
HMI_data.Indicator_Color = Def_Indicator_Color;
HMI_data.Coordinate_Color = Def_Coordinate_Color;
}
void DWIN_SetDataDefaults() {
DWIN_SetColorDefaults();
DWINUI::SetColors(HMI_data.Text_Color, HMI_data.Background_Color, HMI_data.StatusBg_Color);
TERN_(HAS_HOTEND, HMI_data.HotendPidT = PREHEAT_1_TEMP_HOTEND);
TERN_(HAS_HEATED_BED, HMI_data.BedPidT = PREHEAT_1_TEMP_BED);
TERN_(HAS_HOTEND, HMI_data.PidCycles = 5);
#if ENABLED(PREVENT_COLD_EXTRUSION)
HMI_data.ExtMinT = EXTRUDE_MINTEMP;
ApplyExtMinT();
#endif
#if BOTH(HAS_HEATED_BED, PREHEAT_BEFORE_LEVELING)
HMI_data.BedLevT = LEVELING_BED_TEMP;
#endif
TERN_(BAUD_RATE_GCODE, SetBaud250K());
#if BOTH(LED_CONTROL_MENU, HAS_COLOR_LEDS)
TERN_(LED_COLOR_PRESETS, leds.set_default());
ApplyLEDColor();
#endif
}
void DWIN_CopySettingsTo(char * const buff) {
memcpy(buff, &HMI_data, eeprom_data_size);
}
void DWIN_CopySettingsFrom(const char * const buff) {
memcpy(&HMI_data, buff, sizeof(HMI_data_t));
if (HMI_data.Text_Color == HMI_data.Background_Color) DWIN_SetColorDefaults();
DWINUI::SetColors(HMI_data.Text_Color, HMI_data.Background_Color, HMI_data.StatusBg_Color);
TERN_(PREVENT_COLD_EXTRUSION, ApplyExtMinT());
feedrate_percentage = 100;
TERN_(BAUD_RATE_GCODE, HMI_SetBaudRate());
#if BOTH(LED_CONTROL_MENU, HAS_COLOR_LEDS)
leds.set_color(
HMI_data.Led_Color.r,
HMI_data.Led_Color.g,
HMI_data.Led_Color.b
OPTARG(HAS_WHITE_LED, HMI_data.Led_Color.w)
);
leds.update();
#endif
}
// Initialize or re-initialize the LCD
void MarlinUI::init_lcd() {
TERN_(DEBUG_DWIN, SERIAL_ECHOLNPGM("DWIN_Startup"));
DWINUI::init();
DWIN_JPG_CacheTo1(Language_English);
Encoder_Configuration();
}
void DWIN_InitScreen() {
HMI_Init(); // draws boot screen
onCursorDraw = Draw_Menu_Cursor;
onCursorErase = Erase_Menu_Cursor;
DWINUI::onTitleDraw = Draw_Title;
onMenuDraw = Draw_Menu;
checkkey = 255;
CurrentMenu = nullptr;
PreviousMenu = nullptr;
index_file = MROWS;
hash_changed = true;
last_E = 0;
DWIN_DrawStatusLine();
DWIN_Draw_Dashboard();
Goto_Main_Menu();
}
void MarlinUI::update() {
EachMomentUpdate(); // Status update
HMI_SDCardUpdate(); // SD card update
DWIN_HandleScreen(); // Rotary encoder update
}
void MarlinUI::refresh() { /* Nothing to see here */ }
#if HAS_LCD_BRIGHTNESS
void MarlinUI::_set_brightness() { DWIN_LCD_Brightness(backlight ? brightness : 0); }
#endif
void MarlinUI::kill_screen(FSTR_P const lcd_error, FSTR_P const lcd_component) {
DWIN_Draw_Popup(ICON_BLTouch, GET_TEXT_F(MSG_PRINTER_KILLED), lcd_error);
DWINUI::Draw_CenteredString(HMI_data.PopupTxt_Color, 270, GET_TEXT_F(MSG_TURN_OFF));
DWIN_UpdateLCD();
}
void DWIN_RebootScreen() {
DWIN_Frame_Clear(Color_Bg_Black);
DWIN_JPG_ShowAndCache(0);
DWINUI::Draw_CenteredString(Color_White, 220, GET_TEXT_F(MSG_PLEASE_WAIT_REBOOT));
DWIN_UpdateLCD();
safe_delay(500);
}
void DWIN_RedrawDash() {
hash_changed = true;
DWIN_DrawStatusMessage();
DWIN_Draw_Dashboard();
}
void DWIN_RedrawScreen() {
Draw_Main_Area();
DWIN_RedrawDash();
}
#if ENABLED(ADVANCED_PAUSE_FEATURE)
void DWIN_Popup_Pause(FSTR_P const fmsg, uint8_t button /*= 0*/) {
HMI_SaveProcessID(button ? WaitResponse : NothingToDo);
DWIN_Show_Popup(ICON_BLTouch, GET_TEXT_F(MSG_ADVANCED_PAUSE), fmsg, button);
}
void MarlinUI::pause_show_message(const PauseMessage message, const PauseMode mode/*=PAUSE_MODE_SAME*/, const uint8_t extruder/*=active_extruder*/) {
//if (mode == PAUSE_MODE_SAME) return;
pause_mode = mode;
switch (message) {
case PAUSE_MESSAGE_PARKING: DWIN_Popup_Pause(GET_TEXT_F(MSG_PAUSE_PRINT_PARKING)); break; // M125
case PAUSE_MESSAGE_CHANGING: DWIN_Popup_Pause(GET_TEXT_F(MSG_FILAMENT_CHANGE_INIT)); break; // pause_print (M125, M600)
case PAUSE_MESSAGE_WAITING: DWIN_Popup_Pause(GET_TEXT_F(MSG_ADVANCED_PAUSE_WAITING), BTN_Continue); break;
case PAUSE_MESSAGE_INSERT: DWIN_Popup_Pause(GET_TEXT_F(MSG_FILAMENT_CHANGE_INSERT), BTN_Continue); break;
case PAUSE_MESSAGE_LOAD: DWIN_Popup_Pause(GET_TEXT_F(MSG_FILAMENT_CHANGE_LOAD)); break;
case PAUSE_MESSAGE_UNLOAD: DWIN_Popup_Pause(GET_TEXT_F(MSG_FILAMENT_CHANGE_UNLOAD)); break; // Unload of pause and Unload of M702
case PAUSE_MESSAGE_PURGE:
#if ENABLED(ADVANCED_PAUSE_CONTINUOUS_PURGE)
DWIN_Popup_Pause(GET_TEXT_F(MSG_FILAMENT_CHANGE_CONT_PURGE));
#else
DWIN_Popup_Pause(GET_TEXT_F(MSG_FILAMENT_CHANGE_PURGE));
#endif
break;
case PAUSE_MESSAGE_OPTION: Goto_FilamentPurge(); break;
case PAUSE_MESSAGE_RESUME: DWIN_Popup_Pause(GET_TEXT_F(MSG_FILAMENT_CHANGE_RESUME)); break;
case PAUSE_MESSAGE_HEAT: DWIN_Popup_Pause(GET_TEXT_F(MSG_FILAMENT_CHANGE_HEAT), BTN_Continue); break;
case PAUSE_MESSAGE_HEATING: DWIN_Popup_Pause(GET_TEXT_F(MSG_FILAMENT_CHANGE_HEATING)); break;
case PAUSE_MESSAGE_STATUS: HMI_ReturnScreen(); break; // Exit from Pause, Load and Unload
default: break;
}
}
void Draw_Popup_FilamentPurge() {
DWIN_Draw_Popup(ICON_BLTouch, GET_TEXT_F(MSG_ADVANCED_PAUSE), GET_TEXT_F(MSG_FILAMENT_CHANGE_PURGE_CONTINUE));
DWINUI::Draw_Button(BTN_Purge, 26, 280);
DWINUI::Draw_Button(BTN_Continue, 146, 280);
Draw_Select_Highlight(true);
}
void onClick_FilamentPurge() {
if (HMI_flag.select_flag)
pause_menu_response = PAUSE_RESPONSE_EXTRUDE_MORE; // "Purge More" button
else {
HMI_SaveProcessID(NothingToDo);
pause_menu_response = PAUSE_RESPONSE_RESUME_PRINT; // "Continue" button
}
}
void Goto_FilamentPurge() {
pause_menu_response = PAUSE_RESPONSE_WAIT_FOR;
Goto_Popup(Draw_Popup_FilamentPurge, onClick_FilamentPurge);
}
#endif // ADVANCED_PAUSE_FEATURE
#if HAS_MESH
void DWIN_MeshViewer() {
if (!leveling_is_valid())
DWIN_Popup_Continue(ICON_BLTouch, GET_TEXT_F(MSG_MESH_VIEWER), GET_TEXT_F(MSG_NO_VALID_MESH));
else {
HMI_SaveProcessID(WaitResponse);
MeshViewer.Draw();
}
}
#endif // HAS_MESH
#if HAS_LOCKSCREEN
void DWIN_LockScreen() {
if (checkkey != Locked) {
lockScreen.rprocess = checkkey;
checkkey = Locked;
lockScreen.init();
}
}
void DWIN_UnLockScreen() {
if (checkkey == Locked) {
checkkey = lockScreen.rprocess;
Draw_Main_Area();
}
}
void HMI_LockScreen() {
EncoderState encoder_diffState = get_encoder_state();
if (encoder_diffState == ENCODER_DIFF_NO) return;
lockScreen.onEncoder(encoder_diffState);
if (lockScreen.isUnlocked()) DWIN_UnLockScreen();
}
#endif // HAS_LOCKSCREEN
#if HAS_GCODE_PREVIEW
void onClick_ConfirmToPrint() {
if (HMI_flag.select_flag) { // Confirm
card.openAndPrintFile(card.filename);
return DWIN_Print_Started(true);
}
else { // Cancel
DWIN_ResetStatusLine();
checkkey = SelectFile;
return Draw_Print_File_Menu();
}
}
void Goto_ConfirmToPrint() {
Goto_Popup(Preview_DrawFromSD, onClick_ConfirmToPrint);
}
#else
void Goto_ConfirmToPrint() {
card.openAndPrintFile(card.filename);
DWIN_Print_Started(true);
}
#endif
#if HAS_ESDIAG
void Draw_EndStopDiag() {
HMI_SaveProcessID(ESDiagProcess);
ESDiag.Draw();
}
#endif
//=============================================================================
// NEW MENU SUBSYSTEM
//=============================================================================
// Tool functions
#if ENABLED(EEPROM_SETTINGS)
void WriteEeprom() {
ui.set_status(GET_TEXT_F(MSG_STORE_EEPROM));
DWIN_DrawStatusLine();
DWIN_UpdateLCD();
DONE_BUZZ(settings.save());
}
void ReadEeprom() {
const bool success = settings.load();
DWIN_RedrawScreen();
DONE_BUZZ(success);
}
void ResetEeprom() {
settings.reset();
DWIN_RedrawScreen();
DONE_BUZZ(true);
}
#if HAS_MESH
void SaveMesh() { TERN(AUTO_BED_LEVELING_UBL, UBLSaveMesh(), WriteEeprom()); }
#endif
#endif
// Reset Printer
void RebootPrinter() {
wait_for_heatup = wait_for_user = false; // Stop waiting for heating/user
thermalManager.disable_all_heaters();
planner.finish_and_disable();
DWIN_RebootScreen();
hal.reboot();
}
void Goto_Info_Menu() {
Draw_Info_Menu();
DWIN_UpdateLCD();
HMI_SaveProcessID(WaitResponse);
}
void Goto_Move_Menu() {
#if HAS_HOTEND
gcode.process_subcommands_now(F("G92E0")); // reset extruder position
#endif
Draw_Move_Menu();
}
void DisableMotors() { queue.inject(F("M84")); }
void AutoLev() { // Always reacquire the Z "home" position
queue.inject(F(TERN(AUTO_BED_LEVELING_UBL, "G28Z\nG29P1", "G28XYO\nG28Z\nG29")));
}
void AutoHome() { queue.inject_P(G28_STR); }
void HomeX() { queue.inject(F("G28X")); }
void HomeY() { queue.inject(F("G28Y")); }
void HomeZ() { queue.inject(F("G28Z")); }
#if HAS_HOME_OFFSET
// Apply workspace offset, making the current position 0,0,0
void SetHome() {
queue.inject(F("G92X0Y0Z0"));
DONE_BUZZ(true);
}
#endif
#if HAS_ZOFFSET_ITEM
void ApplyZOffset() { TERN_(EEPROM_SETTINGS, settings.save()); }
void LiveZOffset() {
#if EITHER(BABYSTEP_ZPROBE_OFFSET, JUST_BABYSTEP)
const_float_t step_zoffset = round((MenuData.Value / 100.0f) * planner.settings.axis_steps_per_mm[Z_AXIS]) - babystep.accum;
if (BABYSTEP_ALLOWED()) babystep.add_steps(Z_AXIS, step_zoffset);
#endif
}
#if EITHER(BABYSTEP_ZPROBE_OFFSET, JUST_BABYSTEP)
void SetZOffset() {
babystep.accum = round(planner.settings.axis_steps_per_mm[Z_AXIS] * BABY_Z_VAR);
SetPFloatOnClick(Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX, 2, ApplyZOffset, LiveZOffset);
}
#endif
void SetMoveZto0() {
#if ENABLED(Z_SAFE_HOMING)
char cmd[54], str_1[5], str_2[5];
sprintf_P(cmd, PSTR("G28XYO\nG28Z\nG0X%sY%sF5000\nG0Z0F300\nM400"),
dtostrf(Z_SAFE_HOMING_X_POINT, 1, 1, str_1),
dtostrf(Z_SAFE_HOMING_Y_POINT, 1, 1, str_2)
);
gcode.process_subcommands_now(cmd);
#else
TERN_(HAS_LEVELING, set_bed_leveling_enabled(false));
gcode.process_subcommands_now(F("G28O\nG0Z0F300\nM400"));
#endif
ui.reset_status();
DONE_BUZZ(true);
}
#if !HAS_BED_PROBE
void HomeZandDisable() {
SetMoveZto0();
DisableMotors();
}
#endif
#endif // HAS_ZOFFSET_ITEM
#if HAS_PREHEAT
void DoPreheat0() { ui.preheat_all(0); }
#if PREHEAT_COUNT >= 2
void DoPreheat1() { ui.preheat_all(1); }
#if PREHEAT_COUNT >= 3
void DoPreheat2() { ui.preheat_all(2); }
#endif
#endif
#endif
void DoCoolDown() { thermalManager.cooldown(); }
void SetLanguage() {
HMI_ToggleLanguage();
CurrentMenu = nullptr; // Invalidate menu to full redraw
Draw_Prepare_Menu();
}
void LiveMove() {
*MenuData.P_Float = MenuData.Value / MINUNITMULT;
if (!planner.is_full()) {
planner.synchronize();
planner.buffer_line(current_position, homing_feedrate(HMI_value.axis));
}
}
void ApplyMoveE() {
last_E = MenuData.Value / MINUNITMULT;
if (!planner.is_full()) {
planner.synchronize();
planner.buffer_line(current_position, MMM_TO_MMS(FEEDRATE_E));
}
}
void SetMoveX() { HMI_value.axis = X_AXIS; SetPFloatOnClick(X_MIN_POS, X_MAX_POS, UNITFDIGITS, planner.synchronize, LiveMove); }
void SetMoveY() { HMI_value.axis = Y_AXIS; SetPFloatOnClick(Y_MIN_POS, Y_MAX_POS, UNITFDIGITS, planner.synchronize, LiveMove); }
void SetMoveZ() { HMI_value.axis = Z_AXIS; SetPFloatOnClick(Z_MIN_POS, Z_MAX_POS, UNITFDIGITS, planner.synchronize, LiveMove); }
#if HAS_HOTEND
void SetMoveE() {
#if ENABLED(PREVENT_COLD_EXTRUSION)
if (thermalManager.tooColdToExtrude(0))
return DWIN_Popup_Confirm(ICON_TempTooLow, GET_TEXT_F(MSG_HOTEND_TOO_COLD), GET_TEXT_F(MSG_PLEASE_PREHEAT));
#endif
SetPFloatOnClick(last_E - (EXTRUDE_MAXLENGTH), last_E + (EXTRUDE_MAXLENGTH), UNITFDIGITS, ApplyMoveE);
}
#endif
void SetPID(celsius_t t, heater_id_t h) {
char cmd[53] = "";
char str_1[5] = "", str_2[5] = "";
sprintf_P(cmd, PSTR("G28OXY\nG0Z5F300\nG0X%sY%sF5000\nM84\nM400"),
dtostrf(X_CENTER, 1, 1, str_1),
dtostrf(Y_CENTER, 1, 1, str_2)
);
gcode.process_subcommands_now(cmd);
thermalManager.PID_autotune(t, h, HMI_data.PidCycles, true);
}
#if HAS_HOTEND
void HotendPID() { SetPID(HMI_data.HotendPidT, H_E0); }
#endif
#if HAS_HEATED_BED
void BedPID() { SetPID(HMI_data.BedPidT, H_BED); }
#endif
#if ENABLED(POWER_LOSS_RECOVERY)
void SetPwrLossr() {
recovery.enable(!recovery.enabled);
Draw_Chkb_Line(CurrentMenu->line(), recovery.enabled);
DWIN_UpdateLCD();
}
#endif
#if ENABLED(BAUD_RATE_GCODE)
void HMI_SetBaudRate() { HMI_data.Baud115K ? SetBaud115K() : SetBaud250K(); }
void SetBaudRate() {
HMI_data.Baud115K ^= true;
HMI_SetBaudRate();
Draw_Chkb_Line(CurrentMenu->line(), HMI_data.Baud115K);
DWIN_UpdateLCD();
}
void SetBaud115K() { queue.inject(F("M575 P0 B115200")); HMI_data.Baud115K = true; }
void SetBaud250K() { queue.inject(F("M575 P0 B250000")); HMI_data.Baud115K = false; }
#endif
#if HAS_LCD_BRIGHTNESS
void ApplyBrightness() { ui.set_brightness(MenuData.Value); }
void LiveBrightness() { DWIN_LCD_Brightness(MenuData.Value); }
void SetBrightness() { SetIntOnClick(LCD_BRIGHTNESS_MIN, LCD_BRIGHTNESS_MAX, ui.brightness, ApplyBrightness, LiveBrightness); }
void TurnOffBacklight() { HMI_SaveProcessID(WaitResponse); ui.set_brightness(0); DWIN_RedrawScreen(); }
#endif
#if ENABLED(CASE_LIGHT_MENU)
void SetCaseLight() {
caselight.on = !caselight.on;
caselight.update_enabled();
Draw_Chkb_Line(CurrentMenu->line(), caselight.on);
DWIN_UpdateLCD();
}
#if ENABLED(CASELIGHT_USES_BRIGHTNESS)
void LiveCaseLightBrightness() { caselight.brightness = MenuData.Value; caselight.update_brightness(); }
void SetCaseLightBrightness() { SetIntOnClick(0, 255, caselight.brightness, nullptr, LiveCaseLightBrightness); }
#endif
#endif
#if ENABLED(LED_CONTROL_MENU)
#if !BOTH(CASE_LIGHT_MENU, CASE_LIGHT_USE_NEOPIXEL)
void SetLedStatus() {
leds.toggle();
Draw_Chkb_Line(CurrentMenu->line(), leds.lights_on);
DWIN_UpdateLCD();
}
#endif
#if HAS_COLOR_LEDS
void ApplyLEDColor() {
HMI_data.Led_Color = LEDColor( {leds.color.r, leds.color.g, leds.color.b OPTARG(HAS_WHITE_LED, HMI_data.Led_Color.w) } );
}
void LiveLEDColor(uint8_t *color) { *color = MenuData.Value; leds.update(); }
void LiveLEDColorR() { LiveLEDColor(&leds.color.r); }
void LiveLEDColorG() { LiveLEDColor(&leds.color.g); }
void LiveLEDColorB() { LiveLEDColor(&leds.color.b); }
void SetLEDColorR() { SetIntOnClick(0, 255, leds.color.r, ApplyLEDColor, LiveLEDColorR); }
void SetLEDColorG() { SetIntOnClick(0, 255, leds.color.g, ApplyLEDColor, LiveLEDColorG); }
void SetLEDColorB() { SetIntOnClick(0, 255, leds.color.b, ApplyLEDColor, LiveLEDColorB); }
#if HAS_WHITE_LED
void LiveLEDColorW() { LiveLEDColor(&leds.color.w); }
void SetLEDColorW() { SetIntOnClick(0, 255, leds.color.w, ApplyLEDColor, LiveLEDColorW); }
#endif
#endif
#endif
#if ENABLED(SOUND_MENU_ITEM)
void SetEnableSound() {
ui.sound_on = !ui.sound_on;
Draw_Chkb_Line(CurrentMenu->line(), ui.sound_on);
DWIN_UpdateLCD();
}
#endif
#if HAS_HOME_OFFSET
void ApplyHomeOffset() { set_home_offset(HMI_value.axis, MenuData.Value / MINUNITMULT); }
void SetHomeOffsetX() { HMI_value.axis = X_AXIS; SetPFloatOnClick(-50, 50, UNITFDIGITS, ApplyHomeOffset); }
void SetHomeOffsetY() { HMI_value.axis = Y_AXIS; SetPFloatOnClick(-50, 50, UNITFDIGITS, ApplyHomeOffset); }
void SetHomeOffsetZ() { HMI_value.axis = Z_AXIS; SetPFloatOnClick( -2, 2, UNITFDIGITS, ApplyHomeOffset); }
#endif
#if HAS_BED_PROBE
void SetProbeOffsetX() { SetPFloatOnClick(-60, 60, UNITFDIGITS); }
void SetProbeOffsetY() { SetPFloatOnClick(-60, 60, UNITFDIGITS); }
void SetProbeOffsetZ() { SetPFloatOnClick(-10, 10, 2); }
void ProbeTest() {
LCD_MESSAGE(MSG_M48_TEST);
queue.inject(F("G28O\nM48 P10"));
}
void ProbeStow() { probe.stow(); }
void ProbeDeploy() { probe.deploy(); }
#ifdef BLTOUCH_HS_MODE
void SetHSMode() {
bltouch.high_speed_mode = !bltouch.high_speed_mode;
Draw_Chkb_Line(CurrentMenu->line(), bltouch.high_speed_mode);
DWIN_UpdateLCD();
}
#endif
#endif
#if HAS_FILAMENT_SENSOR
void SetRunoutEnable() {
runout.reset();
runout.enabled = !runout.enabled;
Draw_Chkb_Line(CurrentMenu->line(), runout.enabled);
DWIN_UpdateLCD();
}
#if HAS_FILAMENT_RUNOUT_DISTANCE
void ApplyRunoutDistance() { runout.set_runout_distance(MenuData.Value / MINUNITMULT); }
void SetRunoutDistance() { SetFloatOnClick(0, 999, UNITFDIGITS, runout.runout_distance(), ApplyRunoutDistance); }
#endif
#endif
#if ENABLED(ADVANCED_PAUSE_FEATURE)
void SetFilLoad() { SetPFloatOnClick(0, MAX_LOAD_UNLOAD, UNITFDIGITS); }
void SetFilUnload() { SetPFloatOnClick(0, MAX_LOAD_UNLOAD, UNITFDIGITS); }
#endif
#if ENABLED(PREVENT_COLD_EXTRUSION)
void ApplyExtMinT() { thermalManager.extrude_min_temp = HMI_data.ExtMinT; thermalManager.allow_cold_extrude = (HMI_data.ExtMinT == 0); }
void SetExtMinT() { SetPIntOnClick(MIN_ETEMP, MAX_ETEMP, ApplyExtMinT); }
#endif
void RestoreDefaultsColors() {
DWIN_SetColorDefaults();
DWINUI::SetColors(HMI_data.Text_Color, HMI_data.Background_Color, HMI_data.StatusBg_Color);
DWIN_RedrawScreen();
}
void SelColor() {
MenuData.P_Int = (int16_t*)static_cast(CurrentMenu->SelectedItem())->value;
HMI_value.Color[0] = GetRColor(*MenuData.P_Int); // Red
HMI_value.Color[1] = GetGColor(*MenuData.P_Int); // Green
HMI_value.Color[2] = GetBColor(*MenuData.P_Int); // Blue
Draw_GetColor_Menu();
}
void LiveRGBColor() {
HMI_value.Color[CurrentMenu->line() - 2] = MenuData.Value;
uint16_t color = RGB(HMI_value.Color[0], HMI_value.Color[1], HMI_value.Color[2]);
DWIN_Draw_Rectangle(1, color, 20, 315, DWIN_WIDTH - 20, 335);
}
void SetRGBColor() {
const uint8_t color = CurrentMenu->SelectedItem()->icon;
SetIntOnClick(0, (color == 1) ? 63 : 31, HMI_value.Color[color], nullptr, LiveRGBColor);
}
void DWIN_ApplyColor() {
*MenuData.P_Int = RGB(HMI_value.Color[0], HMI_value.Color[1], HMI_value.Color[2]);
DWINUI::SetColors(HMI_data.Text_Color, HMI_data.Background_Color, HMI_data.StatusBg_Color);
Draw_SelectColors_Menu();
hash_changed = true;
LCD_MESSAGE(MSG_COLORS_APPLIED);
DWIN_Draw_Dashboard();
}
void SetSpeed() { SetPIntOnClick(MIN_PRINT_SPEED, MAX_PRINT_SPEED); }
#if HAS_HOTEND
void ApplyHotendTemp() { thermalManager.setTargetHotend(MenuData.Value, 0); }
void SetHotendTemp() { SetIntOnClick(MIN_ETEMP, MAX_ETEMP, thermalManager.degTargetHotend(0), ApplyHotendTemp); }
#endif
#if HAS_HEATED_BED
void ApplyBedTemp() { thermalManager.setTargetBed(MenuData.Value); }
void SetBedTemp() { SetIntOnClick(MIN_BEDTEMP, MAX_BEDTEMP, thermalManager.degTargetBed(), ApplyBedTemp); }
#endif
#if HAS_FAN
void ApplyFanSpeed() { thermalManager.set_fan_speed(0, MenuData.Value); }
void SetFanSpeed() { SetIntOnClick(0, 255, thermalManager.fan_speed[0], ApplyFanSpeed); }
#endif
#if ENABLED(ADVANCED_PAUSE_FEATURE)
void ChangeFilament() {
HMI_SaveProcessID(NothingToDo);
queue.inject(F("M600 B2"));
}
void ParkHead() {
LCD_MESSAGE(MSG_FILAMENT_PARK_ENABLED);
queue.inject(F("G28O\nG27"));
}
#if ENABLED(FILAMENT_LOAD_UNLOAD_GCODES)
void UnloadFilament() {
LCD_MESSAGE(MSG_FILAMENTUNLOAD);
queue.inject(F("M702 Z20"));
}
void LoadFilament() {
LCD_MESSAGE(MSG_FILAMENTLOAD);
queue.inject(F("M701 Z20"));
}
#endif
#endif // ADVANCED_PAUSE_FEATURE
void ApplyFlow() { planner.refresh_e_factor(0); }
void SetFlow() { SetPIntOnClick(MIN_PRINT_FLOW, MAX_PRINT_FLOW, ApplyFlow); }
// Bed Tramming
void TramXY(const uint8_t point, const float &margin, float &x, float &y) {
switch (point) {
case 0:
LCD_MESSAGE(MSG_LEVBED_FL);
x = y = margin;
break;
case 1:
LCD_MESSAGE(MSG_LEVBED_FR);
x = X_BED_SIZE - margin; y = margin;
break;
case 2:
LCD_MESSAGE(MSG_LEVBED_BR);
x = X_BED_SIZE - margin; y = Y_BED_SIZE - margin;
break;
case 3:
LCD_MESSAGE(MSG_LEVBED_BL);
x = margin; y = Y_BED_SIZE - margin;
break;
case 4:
LCD_MESSAGE(MSG_LEVBED_C);
x = X_CENTER; y = Y_CENTER;
break;
}
}
#if HAS_BED_PROBE
float Tram(const uint8_t point) {
char cmd[100] = "";
static bool inLev = false;
float xpos = 0, ypos = 0, zval = 0, margin = 0;
char str_1[6] = "", str_2[6] = "", str_3[6] = "";
if (inLev) return NAN;
margin = HMI_data.FullManualTramming ? 30 : PROBING_MARGIN;
TramXY(point, margin, xpos, ypos);
if (HMI_data.FullManualTramming) {
sprintf_P(cmd, PSTR("M420S0\nG28O\nG90\nG0Z5F300\nG0X%sY%sF5000\nG0Z0F300"),
dtostrf(xpos, 1, 1, str_1),
dtostrf(ypos, 1, 1, str_2)
);
queue.inject(cmd);
}
else {
// AUTO_BED_LEVELING_BILINEAR does not define MESH_INSET
#ifndef MESH_MIN_X
#define MESH_MIN_X (_MAX(X_MIN_BED + PROBING_MARGIN, X_MIN_POS))
#endif
#ifndef MESH_MIN_Y
#define MESH_MIN_Y (_MAX(Y_MIN_BED + PROBING_MARGIN, Y_MIN_POS))
#endif
#ifndef MESH_MAX_X
#define MESH_MAX_X (_MIN(X_MAX_BED - (PROBING_MARGIN), X_MAX_POS))
#endif
#ifndef MESH_MAX_Y
#define MESH_MAX_Y (_MIN(Y_MAX_BED - (PROBING_MARGIN), Y_MAX_POS))
#endif
LIMIT(xpos, MESH_MIN_X, MESH_MAX_X);
LIMIT(ypos, MESH_MIN_Y, MESH_MAX_Y);
probe.stow();
gcode.process_subcommands_now(F("M420S0\nG28O"));
inLev = true;
zval = probe.probe_at_point(xpos, ypos, PROBE_PT_STOW);
if (isnan(zval))
LCD_MESSAGE(MSG_ZPROBE_OUT);
else {
sprintf_P(cmd, PSTR("X:%s, Y:%s, Z:%s"),
dtostrf(xpos, 1, 1, str_1),
dtostrf(ypos, 1, 1, str_2),
dtostrf(zval, 1, 2, str_3)
);
ui.set_status(cmd);
}
inLev = false;
}
return zval;
}
#else
void Tram(const uint8_t point) {
float xpos = 0, ypos = 0, margin = 30;
TramXY(point, margin, xpos, ypos);
char cmd[100] = "", str_1[6] = "", str_2[6] = "";
sprintf_P(cmd, PSTR("M420S0\nG28O\nG90\nG0Z5F300\nG0X%sY%sF5000\nG0Z0F300"), dtostrf(xpos, 1, 1, str_1), dtostrf(ypos, 1, 1, str_2));
queue.inject(cmd);
}
#endif
void TramFL() { Tram(0); }
void TramFR() { Tram(1); }
void TramBR() { Tram(2); }
void TramBL() { Tram(3); }
void TramC () { Tram(4); }
#if HAS_BED_PROBE
void Trammingwizard() {
bed_mesh_t zval = {0};
if (HMI_data.FullManualTramming) {
LCD_MESSAGE_F("Disable manual tramming");
return;
}
zval[0][0] = Tram(0);
checkkey = NothingToDo;
MeshViewer.DrawMesh(zval, 2, 2);
zval[1][0] = Tram(1);
MeshViewer.DrawMesh(zval, 2, 2);
zval[1][1] = Tram(2);
MeshViewer.DrawMesh(zval, 2, 2);
zval[0][1] = Tram(3);
MeshViewer.DrawMesh(zval, 2, 2);
DWINUI::Draw_CenteredString(140, F("Calculating average"));
DWINUI::Draw_CenteredString(160, F("and relative heights"));
safe_delay(1000);
float avg = 0.0f;
LOOP_L_N(x, 2) LOOP_L_N(y, 2) avg += zval[x][y];
avg /= 4.0f;
LOOP_L_N(x, 2) LOOP_L_N(y, 2) zval[x][y] -= avg;
MeshViewer.DrawMesh(zval, 2, 2);
ui.reset_status();
if (ABS(MeshViewer.max - MeshViewer.min) < 0.05) {
DWINUI::Draw_CenteredString(140,F("Corners leveled"));
DWINUI::Draw_CenteredString(160,F("Tolerance achieved!"));
}
else {
uint8_t p = 0;
float max = 0;
FSTR_P plabel;
bool s = true;
LOOP_L_N(x, 2) LOOP_L_N(y, 2) {
const float d = ABS(zval[x][y]);
if (max < d) {
s = (zval[x][y] >= 0);
max = d;
p = x + 2 * y;
}
}
switch (p) {
case 0b00 : plabel = GET_TEXT_F(MSG_LEVBED_FL); break;
case 0b01 : plabel = GET_TEXT_F(MSG_LEVBED_FR); break;
case 0b10 : plabel = GET_TEXT_F(MSG_LEVBED_BL); break;
case 0b11 : plabel = GET_TEXT_F(MSG_LEVBED_BR); break;
default : plabel = F(""); break;
}
DWINUI::Draw_CenteredString(120, F("Corners not leveled"));
DWINUI::Draw_CenteredString(140, F("Knob adjustment required"));
DWINUI::Draw_CenteredString(Color_Green, 160, s ? F("Lower") : F("Raise"));
DWINUI::Draw_CenteredString(Color_Green, 180, plabel);
}
DWINUI::Draw_Button(BTN_Continue, 86, 305);
checkkey = Menu;
HMI_SaveProcessID(WaitResponse);
}
void SetManualTramming() {
HMI_data.FullManualTramming = !HMI_data.FullManualTramming;
Draw_Chkb_Line(CurrentMenu->line(), HMI_data.FullManualTramming);
DWIN_UpdateLCD();
}
#endif // HAS_BED_PROBE
#if ENABLED(MESH_BED_LEVELING)
void ManualMeshStart() {
LCD_MESSAGE(MSG_UBL_BUILD_MESH_MENU);
gcode.process_subcommands_now(F("G28XYO\nG28Z\nM211S0\nG29S1"));
#ifdef MANUAL_PROBE_START_Z
const uint8_t line = CurrentMenu->line(MMeshMoveZItem->pos);
DWINUI::Draw_Signed_Float(HMI_data.Text_Color, HMI_data.Background_Color, 3, 2, VALX - 2 * DWINUI::fontWidth(DWIN_FONT_MENU), MBASE(line), MANUAL_PROBE_START_Z);
#endif
}
void LiveMeshMoveZ() {
*MenuData.P_Float = MenuData.Value / POW(10, 2);
if (!planner.is_full()) {
planner.synchronize();
planner.buffer_line(current_position, homing_feedrate(Z_AXIS));
}
}
void SetMMeshMoveZ() { SetPFloatOnClick(-1, 1, 2, planner.synchronize, LiveMeshMoveZ); }
void ManualMeshContinue() {
gcode.process_subcommands_now(F("G29S2"));
MMeshMoveZItem->redraw();
}
void ManualMeshSave() {
LCD_MESSAGE(MSG_UBL_STORAGE_MESH_MENU);
queue.inject(F("M211S1\nM500"));
}
#endif // MESH_BED_LEVELING
#if HAS_PREHEAT
#if HAS_HOTEND
void SetPreheatEndTemp() { SetPIntOnClick(MIN_ETEMP, MAX_ETEMP); }
#endif
#if HAS_HEATED_BED
void SetPreheatBedTemp() { SetPIntOnClick(MIN_BEDTEMP, MAX_BEDTEMP); }
#endif
#if HAS_FAN
void SetPreheatFanSpeed() { SetPIntOnClick(0, 255); }
#endif
#endif
void ApplyMaxSpeed() { planner.set_max_feedrate(HMI_value.axis, MenuData.Value / MINUNITMULT); }
void SetMaxSpeedX() { HMI_value.axis = X_AXIS, SetFloatOnClick(MIN_MAXFEEDSPEED, max_feedrate_edit_values[X_AXIS], UNITFDIGITS, planner.settings.max_feedrate_mm_s[X_AXIS], ApplyMaxSpeed); }
void SetMaxSpeedY() { HMI_value.axis = Y_AXIS, SetFloatOnClick(MIN_MAXFEEDSPEED, max_feedrate_edit_values[Y_AXIS], UNITFDIGITS, planner.settings.max_feedrate_mm_s[Y_AXIS], ApplyMaxSpeed); }
void SetMaxSpeedZ() { HMI_value.axis = Z_AXIS, SetFloatOnClick(MIN_MAXFEEDSPEED, max_feedrate_edit_values[Z_AXIS], UNITFDIGITS, planner.settings.max_feedrate_mm_s[Z_AXIS], ApplyMaxSpeed); }
#if HAS_HOTEND
void SetMaxSpeedE() { HMI_value.axis = E_AXIS; SetFloatOnClick(MIN_MAXFEEDSPEED, max_feedrate_edit_values[E_AXIS], UNITFDIGITS, planner.settings.max_feedrate_mm_s[E_AXIS], ApplyMaxSpeed); }
#endif
void ApplyMaxAccel() { planner.set_max_acceleration(HMI_value.axis, MenuData.Value); }
void SetMaxAccelX() { HMI_value.axis = X_AXIS, SetIntOnClick(MIN_MAXACCELERATION, max_acceleration_edit_values[X_AXIS], planner.settings.max_acceleration_mm_per_s2[X_AXIS], ApplyMaxAccel); }
void SetMaxAccelY() { HMI_value.axis = Y_AXIS, SetIntOnClick(MIN_MAXACCELERATION, max_acceleration_edit_values[Y_AXIS], planner.settings.max_acceleration_mm_per_s2[Y_AXIS], ApplyMaxAccel); }
void SetMaxAccelZ() { HMI_value.axis = Z_AXIS, SetIntOnClick(MIN_MAXACCELERATION, max_acceleration_edit_values[Z_AXIS], planner.settings.max_acceleration_mm_per_s2[Z_AXIS], ApplyMaxAccel); }
#if HAS_HOTEND
void SetMaxAccelE() { HMI_value.axis = E_AXIS; SetIntOnClick(MIN_MAXACCELERATION, max_acceleration_edit_values[E_AXIS], planner.settings.max_acceleration_mm_per_s2[E_AXIS], ApplyMaxAccel); }
#endif
#if HAS_CLASSIC_JERK
void ApplyMaxJerk() { planner.set_max_jerk(HMI_value.axis, MenuData.Value / MINUNITMULT); }
void SetMaxJerkX() { HMI_value.axis = X_AXIS, SetFloatOnClick(MIN_MAXJERK, max_jerk_edit_values[X_AXIS], UNITFDIGITS, planner.max_jerk[X_AXIS], ApplyMaxJerk); }
void SetMaxJerkY() { HMI_value.axis = Y_AXIS, SetFloatOnClick(MIN_MAXJERK, max_jerk_edit_values[Y_AXIS], UNITFDIGITS, planner.max_jerk[Y_AXIS], ApplyMaxJerk); }
void SetMaxJerkZ() { HMI_value.axis = Z_AXIS, SetFloatOnClick(MIN_MAXJERK, max_jerk_edit_values[Z_AXIS], UNITFDIGITS, planner.max_jerk[Z_AXIS], ApplyMaxJerk); }
#if HAS_HOTEND
void SetMaxJerkE() { HMI_value.axis = E_AXIS; SetFloatOnClick(MIN_MAXJERK, max_jerk_edit_values[E_AXIS], UNITFDIGITS, planner.max_jerk[E_AXIS], ApplyMaxJerk); }
#endif
#endif
void SetStepsX() { HMI_value.axis = X_AXIS, SetPFloatOnClick( MIN_STEP, MAX_STEP, UNITFDIGITS); }
void SetStepsY() { HMI_value.axis = Y_AXIS, SetPFloatOnClick( MIN_STEP, MAX_STEP, UNITFDIGITS); }
void SetStepsZ() { HMI_value.axis = Z_AXIS, SetPFloatOnClick( MIN_STEP, MAX_STEP, UNITFDIGITS); }
#if HAS_HOTEND
void SetStepsE() { HMI_value.axis = E_AXIS; SetPFloatOnClick( MIN_STEP, MAX_STEP, UNITFDIGITS); }
#if ENABLED(PIDTEMP)
void SetHotendPidT() { SetPIntOnClick(MIN_ETEMP, MAX_ETEMP); }
#endif
#endif
#if ENABLED(PIDTEMPBED)
void SetBedPidT() { SetPIntOnClick(MIN_BEDTEMP, MAX_BEDTEMP); }
#endif
#if EITHER(PIDTEMP, PIDTEMPBED)
void SetPidCycles() { SetPIntOnClick(3, 50); }
void SetKp() { SetPFloatOnClick(0, 1000, 2); }
void ApplyPIDi() {
*MenuData.P_Float = scalePID_i(MenuData.Value / POW(10, 2));
thermalManager.updatePID();
}
void ApplyPIDd() {
*MenuData.P_Float = scalePID_d(MenuData.Value / POW(10, 2));
thermalManager.updatePID();
}
void SetKi() {
MenuData.P_Float = (float*)static_cast(CurrentMenu->SelectedItem())->value;
const float value = unscalePID_i(*MenuData.P_Float);
SetFloatOnClick(0, 1000, 2, value, ApplyPIDi);
}
void SetKd() {
MenuData.P_Float = (float*)static_cast(CurrentMenu->SelectedItem())->value;
const float value = unscalePID_d(*MenuData.P_Float);
SetFloatOnClick(0, 1000, 2, value, ApplyPIDd);
}
#endif
#if ENABLED(FWRETRACT)
void Return_FWRetract_Menu() { (PreviousMenu == FilSetMenu) ? Draw_FilSet_Menu() : Draw_Tune_Menu(); }
void SetRetractLength() { SetPFloatOnClick( 0, 10, UNITFDIGITS); }
void SetRetractSpeed() { SetPFloatOnClick( 1, 90, UNITFDIGITS); }
void SetZRaise() { SetPFloatOnClick( 0, 2, 2); }
void SetRecoverSpeed() { SetPFloatOnClick( 1, 90, UNITFDIGITS); }
void SetAddRecover() { SetPFloatOnClick(-5, 5, UNITFDIGITS); }
#endif
// Special Menuitem Drawing functions =================================================
void onDrawBack(MenuItemClass* menuitem, int8_t line) {
if (HMI_IsChinese()) menuitem->SetFrame(1, 129, 72, 156, 84);
onDrawMenuItem(menuitem, line);
}
void onDrawTempSubMenu(MenuItemClass* menuitem, int8_t line) {
if (HMI_IsChinese()) menuitem->SetFrame(1, 57, 104, 84, 116);
onDrawSubMenu(menuitem, line);
}
void onDrawMotionSubMenu(MenuItemClass* menuitem, int8_t line) {
if (HMI_IsChinese()) menuitem->SetFrame(1, 87, 104, 114, 116);
onDrawSubMenu(menuitem, line);
}
#if ENABLED(EEPROM_SETTINGS)
void onDrawWriteEeprom(MenuItemClass* menuitem, int8_t line) {
if (HMI_IsChinese()) menuitem->SetFrame(1, 117, 104, 172, 116);
onDrawMenuItem(menuitem, line);
}
void onDrawReadEeprom(MenuItemClass* menuitem, int8_t line) {
if (HMI_IsChinese()) menuitem->SetFrame(1, 174, 103, 229, 116);
onDrawMenuItem(menuitem, line);
}
void onDrawResetEeprom(MenuItemClass* menuitem, int8_t line) {
if (HMI_IsChinese()) menuitem->SetFrame(1, 1, 118, 56, 131);
onDrawMenuItem(menuitem, line);
}
#endif
void onDrawInfoSubMenu(MenuItemClass* menuitem, int8_t line) {
if (HMI_IsChinese()) menuitem->SetFrame(1, 231, 104, 258, 116);
onDrawSubMenu(menuitem, line);
}
void onDrawMoveX(MenuItemClass* menuitem, int8_t line) {
if (HMI_IsChinese()) menuitem->SetFrame(1, 58, 118, 106, 132);
onDrawPFloatMenu(menuitem, line);
}
void onDrawMoveY(MenuItemClass* menuitem, int8_t line) {
if (HMI_IsChinese()) menuitem->SetFrame(1, 109, 118, 157, 132);
onDrawPFloatMenu(menuitem, line);
}
void onDrawMoveZ(MenuItemClass* menuitem, int8_t line) {
if (HMI_IsChinese()) menuitem->SetFrame(1, 160, 118, 209, 132);
onDrawPFloatMenu(menuitem, line);
}
#if HAS_HOTEND
void onDrawMoveE(MenuItemClass* menuitem, int8_t line) {
if (HMI_IsChinese()) menuitem->SetFrame(1, 212, 118, 253, 131);
onDrawPFloatMenu(menuitem, line);
}
#endif
void onDrawMoveSubMenu(MenuItemClass* menuitem, int8_t line) {
if (HMI_IsChinese()) menuitem->SetFrame(1, 159, 70, 200, 84);
onDrawSubMenu(menuitem, line);
}
void onDrawDisableMotors(MenuItemClass* menuitem, int8_t line) {
if (HMI_IsChinese()) menuitem->SetFrame(1, 204, 70, 259, 82);
onDrawMenuItem(menuitem, line);
}
void onDrawAutoHome(MenuItemClass* menuitem, int8_t line) {
if (HMI_IsChinese()) menuitem->SetFrame(1, 0, 89, 41, 101);
onDrawMenuItem(menuitem, line);
}
#if HAS_ZOFFSET_ITEM
#if EITHER(BABYSTEP_ZPROBE_OFFSET, JUST_BABYSTEP)
void onDrawZOffset(MenuItemClass* menuitem, int8_t line) {
if (HMI_IsChinese()) menuitem->SetFrame(1, 174, 164, 223, 177);
onDrawPFloat2Menu(menuitem, line);
}
#else
void onDrawHomeOffset(MenuItemClass* menuitem, int8_t line) {
if (HMI_IsChinese()) menuitem->SetFrame(1, 43, 89, 98, 101);
onDrawMenuItem(menuitem, line);
}
#endif
#endif
#if HAS_HOTEND
void onDrawPreheat1(MenuItemClass* menuitem, int8_t line) {
if (HMI_IsChinese()) menuitem->SetFrame(1, 100, 89, 151, 101);
onDrawMenuItem(menuitem, line);
}
#if PREHEAT_COUNT > 1
void onDrawPreheat2(MenuItemClass* menuitem, int8_t line) {
if (HMI_IsChinese()) menuitem->SetFrame(1, 180, 89, 233, 100);
onDrawMenuItem(menuitem, line);
}
#endif
#endif
#if HAS_PREHEAT
void onDrawCooldown(MenuItemClass* menuitem, int8_t line) {
if (HMI_IsChinese()) menuitem->SetFrame(1, 1, 104, 56, 117);
onDrawMenuItem(menuitem, line);
}
#endif
void onDrawLanguage(MenuItemClass* menuitem, int8_t line) {
if (HMI_IsChinese()) menuitem->SetFrame(1, 239, 134, 266, 146);
onDrawMenuItem(menuitem, line);
DWINUI::Draw_String(VALX, MBASE(line), HMI_IsChinese() ? F("CN") : F("EN"));
}
void onDrawSelColorItem(MenuItemClass* menuitem, int8_t line) {
const uint16_t color = *(uint16_t*)static_cast(menuitem)->value;
DWIN_Draw_Rectangle(0, HMI_data.Highlight_Color, ICOX + 1, MBASE(line) - 1 + 1, ICOX + 18, MBASE(line) - 1 + 18);
DWIN_Draw_Rectangle(1, color, ICOX + 2, MBASE(line) - 1 + 2, ICOX + 17, MBASE(line) - 1 + 17);
onDrawMenuItem(menuitem, line);
}
void onDrawGetColorItem(MenuItemClass* menuitem, int8_t line) {
const uint8_t i = menuitem->icon;
uint16_t color;
switch (i) {
case 0: color = RGB(31, 0, 0); break; // Red
case 1: color = RGB(0, 63, 0); break; // Green
case 2: color = RGB(0, 0, 31); break; // Blue
default: color = 0; break;
}
DWIN_Draw_Rectangle(0, HMI_data.Highlight_Color, ICOX + 1, MBASE(line) - 1 + 1, ICOX + 18, MBASE(line) - 1 + 18);
DWIN_Draw_Rectangle(1, color, ICOX + 2, MBASE(line) - 1 + 2, ICOX + 17, MBASE(line) - 1 + 17);
DWINUI::Draw_String(LBLX, MBASE(line) - 1, menuitem->caption);
Draw_Menu_IntValue(HMI_data.Background_Color, line, 4, HMI_value.Color[i]);
DWIN_Draw_HLine(HMI_data.SplitLine_Color, 16, MYPOS(line + 1), 240);
}
void onDrawPIDi(MenuItemClass* menuitem, int8_t line) { onDrawFloatMenu(menuitem, line, 2, unscalePID_i(*(float*)static_cast(menuitem)->value)); }
void onDrawPIDd(MenuItemClass* menuitem, int8_t line) { onDrawFloatMenu(menuitem, line, 2, unscalePID_d(*(float*)static_cast(menuitem)->value)); }
void onDrawSpeedItem(MenuItemClass* menuitem, int8_t line) {
if (HMI_IsChinese()) menuitem->SetFrame(1, 116, 164, 171, 176);
onDrawPIntMenu(menuitem, line);
}
#if HAS_HOTEND
void onDrawHotendTemp(MenuItemClass* menuitem, int8_t line) {
if (HMI_IsChinese()) menuitem->SetFrame(1, 1, 134, 56, 146);
onDrawPIntMenu(menuitem, line);
}
#endif
#if HAS_HEATED_BED
void onDrawBedTemp(MenuItemClass* menuitem, int8_t line) {
if (HMI_IsChinese()) menuitem->SetFrame(1, 58, 134, 113, 146);
onDrawPIntMenu(menuitem, line);
}
#endif
#if HAS_FAN
void onDrawFanSpeed(MenuItemClass* menuitem, int8_t line) {
if (HMI_IsChinese()) menuitem->SetFrame(1, 115, 134, 170, 146);
onDrawPInt8Menu(menuitem, line);
}
#endif
void onDrawSteps(MenuItemClass* menuitem, int8_t line) {
if (HMI_IsChinese()) menuitem->SetFrame(1, 153, 148, 194, 161);
onDrawSubMenu(menuitem, line);
}
#if ENABLED(MESH_BED_LEVELING)
void onDrawMMeshMoveZ(MenuItemClass* menuitem, int8_t line) {
if (HMI_IsChinese()) menuitem->SetFrame(1, 160, 118, 209, 132);
onDrawPFloat2Menu(menuitem, line);
}
#endif
#if HAS_PREHEAT
#if HAS_HOTEND
void onDrawSetPreheatHotend(MenuItemClass* menuitem, int8_t line) {
if (HMI_IsChinese()) menuitem->SetFrame(1, 1, 134, 56, 146);
onDrawPIntMenu(menuitem, line);
}
#endif
#if HAS_HEATED_BED
void onDrawSetPreheatBed(MenuItemClass* menuitem, int8_t line) {
if (HMI_IsChinese()) menuitem->SetFrame(1, 58, 134, 113, 146);
onDrawPIntMenu(menuitem, line);
}
#endif
#if HAS_FAN
void onDrawSetPreheatFan(MenuItemClass* menuitem, int8_t line) {
if (HMI_IsChinese()) menuitem->SetFrame(1, 115, 134, 170, 146);
onDrawPIntMenu(menuitem, line);
}
#endif
void onDrawPLAPreheatSubMenu(MenuItemClass* menuitem, int8_t line) {
if (HMI_IsChinese()) menuitem->SetFrame(1, 100, 89, 178, 101);
onDrawSubMenu(menuitem,line);
}
#if PREHEAT_COUNT >= 2
void onDrawABSPreheatSubMenu(MenuItemClass* menuitem, int8_t line) {
if (HMI_IsChinese()) menuitem->SetFrame(1, 180, 89, 260, 100);
onDrawSubMenu(menuitem,line);
}
#endif
#endif // HAS_PREHEAT
void onDrawSpeed(MenuItemClass* menuitem, int8_t line) {
if (HMI_IsChinese())
menuitem->SetFrame(1, 173, 133, 228, 147);
onDrawSubMenu(menuitem, line);
}
void onDrawMaxSpeedX(MenuItemClass* menuitem, int8_t line) {
if (HMI_IsChinese()) {
menuitem->SetFrame(1, 173, 133, 228, 147);
DWIN_Frame_AreaCopy(1, 229, 133, 236, 147, LBLX + 58, MBASE(line)); // X
}
onDrawPFloatMenu(menuitem, line);
}
void onDrawMaxSpeedY(MenuItemClass* menuitem, int8_t line) {
if (HMI_IsChinese()) {
menuitem->SetFrame(1, 173, 133, 228, 147);
DWIN_Frame_AreaCopy(1, 1, 150, 7, 160, LBLX + 58, MBASE(line)); // Y
}
onDrawPFloatMenu(menuitem, line);
}
void onDrawMaxSpeedZ(MenuItemClass* menuitem, int8_t line) {
if (HMI_IsChinese()) {
menuitem->SetFrame(1, 173, 133, 228, 147);
DWIN_Frame_AreaCopy(1, 9, 150, 16, 160, LBLX + 58, MBASE(line) + 3); // Z
}
onDrawPFloatMenu(menuitem, line);
}
#if HAS_HOTEND
void onDrawMaxSpeedE(MenuItemClass* menuitem, int8_t line) {
if (HMI_IsChinese()) {
menuitem->SetFrame(1, 173, 133, 228, 147);
DWIN_Frame_AreaCopy(1, 18, 150, 25, 160, LBLX + 58, MBASE(line)); // E
}
onDrawPFloatMenu(menuitem, line);
}
#endif
void onDrawAcc(MenuItemClass* menuitem, int8_t line) {
if (HMI_IsChinese()) {
menuitem->SetFrame(1, 173, 133, 200, 147);
DWIN_Frame_AreaCopy(1, 28, 149, 69, 161, LBLX + 27, MBASE(line) + 1); // ...Acceleration
}
onDrawSubMenu(menuitem, line);
}
void onDrawMaxAccelX(MenuItemClass* menuitem, int8_t line) {
if (HMI_IsChinese()) {
menuitem->SetFrame(1, 173, 133, 200, 147);
DWIN_Frame_AreaCopy(1, 28, 149, 69, 161, LBLX + 27, MBASE(line));
DWIN_Frame_AreaCopy(1, 229, 133, 236, 147, LBLX + 71, MBASE(line)); // X
}
onDrawPInt32Menu(menuitem, line);
}
void onDrawMaxAccelY(MenuItemClass* menuitem, int8_t line) {
if (HMI_IsChinese()) {
menuitem->SetFrame(1, 173, 133, 200, 147);
DWIN_Frame_AreaCopy(1, 28, 149, 69, 161, LBLX + 27, MBASE(line));
DWIN_Frame_AreaCopy(1, 1, 150, 7, 160, LBLX + 71, MBASE(line)); // Y
}
onDrawPInt32Menu(menuitem, line);
}
void onDrawMaxAccelZ(MenuItemClass* menuitem, int8_t line) {
if (HMI_IsChinese()) {
menuitem->SetFrame(1, 173, 133, 200, 147);
DWIN_Frame_AreaCopy(1, 28, 149, 69, 161, LBLX + 27, MBASE(line));
DWIN_Frame_AreaCopy(1, 9, 150, 16, 160, LBLX + 71, MBASE(line)); // Z
}
onDrawPInt32Menu(menuitem, line);
}
#if HAS_HOTEND
void onDrawMaxAccelE(MenuItemClass* menuitem, int8_t line) {
if (HMI_IsChinese()) {
menuitem->SetFrame(1, 173, 133, 200, 147);
DWIN_Frame_AreaCopy(1, 28, 149, 69, 161, LBLX + 27, MBASE(line));
DWIN_Frame_AreaCopy(1, 18, 150, 25, 160, LBLX + 71, MBASE(line)); // E
}
onDrawPInt32Menu(menuitem, line);
}
#endif
#if HAS_CLASSIC_JERK
void onDrawJerk(MenuItemClass* menuitem, int8_t line) {
if (HMI_IsChinese()) {
menuitem->SetFrame(1, 173, 133, 200, 147);
DWIN_Frame_AreaCopy(1, 1, 180, 28, 192, LBLX + 27, MBASE(line) + 1); // ...
DWIN_Frame_AreaCopy(1, 202, 133, 228, 147, LBLX + 54, MBASE(line)); // ...Jerk
}
onDrawSubMenu(menuitem, line);
}
void onDrawMaxJerkX(MenuItemClass* menuitem, int8_t line) {
if (HMI_IsChinese()) {
menuitem->SetFrame(1, 173, 133, 200, 147);
DWIN_Frame_AreaCopy(1, 1, 180, 28, 192, LBLX + 27, MBASE(line));
DWIN_Frame_AreaCopy(1, 202, 133, 228, 147, LBLX + 53, MBASE(line));
DWIN_Frame_AreaCopy(1, 229, 133, 236, 147, LBLX + 83, MBASE(line));
}
onDrawPFloatMenu(menuitem, line);
}
void onDrawMaxJerkY(MenuItemClass* menuitem, int8_t line) {
if (HMI_IsChinese()) {
menuitem->SetFrame(1, 173, 133, 200, 147);
DWIN_Frame_AreaCopy(1, 1, 180, 28, 192, LBLX + 27, MBASE(line));
DWIN_Frame_AreaCopy(1, 202, 133, 228, 147, LBLX + 53, MBASE(line));
DWIN_Frame_AreaCopy(1, 1, 150, 7, 160, LBLX + 83, MBASE(line));
}
onDrawPFloatMenu(menuitem, line);
}
void onDrawMaxJerkZ(MenuItemClass* menuitem, int8_t line) {
if (HMI_IsChinese()) {
menuitem->SetFrame(1, 173, 133, 200, 147);
DWIN_Frame_AreaCopy(1, 1, 180, 28, 192, LBLX + 27, MBASE(line));
DWIN_Frame_AreaCopy(1, 202, 133, 228, 147, LBLX + 53, MBASE(line));
DWIN_Frame_AreaCopy(1, 9, 150, 16, 160, LBLX + 83, MBASE(line));
}
onDrawPFloatMenu(menuitem, line);
}
#if HAS_HOTEND
void onDrawMaxJerkE(MenuItemClass* menuitem, int8_t line) {
if (HMI_IsChinese()) {
menuitem->SetFrame(1, 173, 133, 200, 147);
DWIN_Frame_AreaCopy(1, 1, 180, 28, 192, LBLX + 27, MBASE(line));
DWIN_Frame_AreaCopy(1, 202, 133, 228, 147, LBLX + 53, MBASE(line));
DWIN_Frame_AreaCopy(1, 18, 150, 25, 160, LBLX + 83, MBASE(line));
}
onDrawPFloatMenu(menuitem, line);
}
#endif
#endif // HAS_CLASSIC_JERK
void onDrawStepsX(MenuItemClass* menuitem, int8_t line) {
if (HMI_IsChinese()) {
menuitem->SetFrame(1, 153, 148, 194, 161);
DWIN_Frame_AreaCopy(1, 229, 133, 236, 147, LBLX + 44, MBASE(line)); // X
}
onDrawPFloatMenu(menuitem, line);
}
void onDrawStepsY(MenuItemClass* menuitem, int8_t line) {
if (HMI_IsChinese()) {
menuitem->SetFrame(1, 153, 148, 194, 161);
DWIN_Frame_AreaCopy(1, 1, 150, 7, 160, LBLX + 44, MBASE(line)); // Y
}
onDrawPFloatMenu(menuitem, line);
}
void onDrawStepsZ(MenuItemClass* menuitem, int8_t line) {
if (HMI_IsChinese()) {
menuitem->SetFrame(1, 153, 148, 194, 161);
DWIN_Frame_AreaCopy(1, 9, 150, 16, 160, LBLX + 44, MBASE(line)); // Z
}
onDrawPFloatMenu(menuitem, line);
}
#if HAS_HOTEND
void onDrawStepsE(MenuItemClass* menuitem, int8_t line) {
if (HMI_IsChinese()) {
menuitem->SetFrame(1, 153, 148, 194, 161);
DWIN_Frame_AreaCopy(1, 18, 150, 25, 160, LBLX + 44, MBASE(line)); // E
}
onDrawPFloatMenu(menuitem, line);
}
#endif
#if HAS_ONESTEP_LEVELING
void onDrawManualTramming(MenuItemClass* menuitem, int8_t line) { onDrawChkbMenu(menuitem, line, HMI_data.FullManualTramming); }
#endif
// Menu Creation and Drawing functions ======================================================
void SetMenuTitle(frame_rect_t cn, const __FlashStringHelper* fstr) {
if (HMI_IsChinese() && (cn.w != 0))
CurrentMenu->MenuTitle.SetFrame(cn.x, cn.y, cn.w, cn.h);
else
CurrentMenu->MenuTitle.SetCaption(fstr);
}
void Draw_Prepare_Menu() {
checkkey = Menu;
if (!PrepareMenu) PrepareMenu = new MenuClass();
if (CurrentMenu != PrepareMenu) {
CurrentMenu = PrepareMenu;
SetMenuTitle({133, 1, 28, 13}, GET_TEXT_F(MSG_PREPARE));
MenuItemsPrepare(13);
BACK_ITEM(Goto_Main_Menu);
#if ENABLED(ADVANCED_PAUSE_FEATURE)
MENU_ITEM_F(ICON_FilMan, MSG_FILAMENT_MAN, onDrawSubMenu, Draw_FilamentMan_Menu);
#endif
MENU_ITEM_F(ICON_Axis, MSG_MOVE_AXIS, onDrawMoveSubMenu, Goto_Move_Menu);
MENU_ITEM_F(ICON_Tram, MSG_BED_TRAMMING, onDrawSubMenu, Draw_Tramming_Menu);
MENU_ITEM_F(ICON_CloseMotor, MSG_DISABLE_STEPPERS, onDrawDisableMotors, DisableMotors);
#if ENABLED(INDIVIDUAL_AXIS_HOMING_SUBMENU)
MENU_ITEM_F(ICON_Homing, MSG_HOMING, onDrawSubMenu, Draw_Homing_Menu);
#else
MENU_ITEM_F(ICON_Homing, MSG_AUTO_HOME, onDrawAutoHome, AutoHome);
#endif
#if ENABLED(MESH_BED_LEVELING)
MENU_ITEM_F(ICON_ManualMesh, MSG_MANUAL_MESH, onDrawSubMenu, Draw_ManualMesh_Menu);
#endif
#if HAS_ONESTEP_LEVELING
MENU_ITEM_F(ICON_Level, MSG_AUTO_MESH, onDrawMenuItem, AutoLev);
#endif
#if HAS_ZOFFSET_ITEM
#if ENABLED(BABYSTEP_ZPROBE_OFFSET)
MENU_ITEM_F(ICON_SetZOffset, MSG_PROBE_WIZARD, onDrawSubMenu, Draw_ZOffsetWiz_Menu);
#elif JUST_BABYSTEP
EDIT_ITEM_F(ICON_Zoffset, MSG_ZPROBE_ZOFFSET, onDrawPFloat2Menu, SetZOffset, &BABY_Z_VAR);
#else
MENU_ITEM_F(ICON_SetHome, MSG_SET_HOME_OFFSETS, onDrawHomeOffset, SetHome);
#endif
#endif
#if HAS_PREHEAT
MENU_ITEM_F(ICON_PLAPreheat, MSG_PREHEAT_1, onDrawPreheat1, DoPreheat0);
#if PREHEAT_COUNT > 1
MENU_ITEM(ICON_ABSPreheat, F("Preheat " PREHEAT_2_LABEL), onDrawPreheat2, DoPreheat1);
#if PREHEAT_COUNT > 2
MENU_ITEM(ICON_CustomPreheat, F("Preheat " PREHEAT_3_LABEL), onDrawMenuItem, DoPreheat2);
#endif
#endif
#endif
MENU_ITEM_F(ICON_Cool, MSG_COOLDOWN, onDrawCooldown, DoCoolDown);
MENU_ITEM_F(ICON_Language, MSG_UI_LANGUAGE, onDrawLanguage, SetLanguage);
}
ui.reset_status(true);
CurrentMenu->draw();
}
void Draw_Tramming_Menu() {
checkkey = Menu;
if (SetMenu(TrammingMenu, GET_TEXT_F(MSG_BED_TRAMMING), 8)) {
BACK_ITEM(Draw_Prepare_Menu);
#if HAS_BED_PROBE
MENU_ITEM_F(ICON_ProbeSet, MSG_TRAMMING_WIZARD, onDrawMenuItem, Trammingwizard);
EDIT_ITEM_F(ICON_ProbeSet, MSG_BED_TRAMMING_MANUAL, onDrawChkbMenu, SetManualTramming, &HMI_data.FullManualTramming);
#else
MENU_ITEM(ICON_MoveZ0, F("Home Z and disable"), onDrawMenuItem, HomeZandDisable);
#endif
MENU_ITEM_F(ICON_Axis, MSG_LEVBED_FL, onDrawMenuItem, TramFL);
MENU_ITEM_F(ICON_Axis, MSG_LEVBED_FR, onDrawMenuItem, TramFR);
MENU_ITEM_F(ICON_Axis, MSG_LEVBED_BR, onDrawMenuItem, TramBR);
MENU_ITEM_F(ICON_Axis, MSG_LEVBED_BL, onDrawMenuItem, TramBL);
MENU_ITEM(ICON_Axis, GET_TEXT_F(MSG_LEVBED_C ), onDrawMenuItem, TramC );
}
UpdateMenu(TrammingMenu);
}
void Draw_Control_Menu() {
checkkey = Menu;
if (!ControlMenu) ControlMenu = new MenuClass();
if (CurrentMenu != ControlMenu) {
CurrentMenu = ControlMenu;
SetMenuTitle({103, 1, 28, 14}, GET_TEXT_F(MSG_CONTROL));
MenuItemsPrepare(10);
BACK_ITEM(Goto_Main_Menu);
MENU_ITEM_F(ICON_Temperature, MSG_TEMPERATURE, onDrawTempSubMenu, Draw_Temperature_Menu);
MENU_ITEM_F(ICON_Motion, MSG_MOTION, onDrawMotionSubMenu, Draw_Motion_Menu);
#if ENABLED(EEPROM_SETTINGS)
MENU_ITEM_F(ICON_WriteEEPROM, MSG_STORE_EEPROM, onDrawWriteEeprom, WriteEeprom);
MENU_ITEM_F(ICON_ReadEEPROM, MSG_LOAD_EEPROM, onDrawReadEeprom, ReadEeprom);
MENU_ITEM_F(ICON_ResumeEEPROM, MSG_RESTORE_DEFAULTS, onDrawResetEeprom, ResetEeprom);
#endif
MENU_ITEM_F(ICON_Reboot, MSG_RESET_PRINTER, onDrawMenuItem, RebootPrinter);
#if ENABLED(CASE_LIGHT_MENU)
#if ENABLED(CASELIGHT_USES_BRIGHTNESS)
MENU_ITEM_F(ICON_CaseLight, MSG_CASE_LIGHT, onDrawSubMenu, Draw_CaseLight_Menu);
#else
MENU_ITEM_F(ICON_CaseLight, MSG_CASE_LIGHT, onDrawChkbMenu, SetCaseLight, &caselight.on);
#endif
#endif
#if ENABLED(LED_CONTROL_MENU)
MENU_ITEM_F(ICON_LedControl, MSG_LED_CONTROL, onDrawSubMenu, Draw_LedControl_Menu);
#endif
MENU_ITEM_F(ICON_Info, MSG_INFO_SCREEN, onDrawInfoSubMenu, Goto_Info_Menu);
}
ui.reset_status(true);
CurrentMenu->draw();
}
void Draw_AdvancedSettings_Menu() {
checkkey = Menu;
if (SetMenu(AdvancedSettings, GET_TEXT_F(MSG_ADVANCED_SETTINGS), 20)) {
BACK_ITEM(Goto_Main_Menu);
#if ENABLED(EEPROM_SETTINGS)
MENU_ITEM_F(ICON_WriteEEPROM, MSG_STORE_EEPROM, onDrawMenuItem, WriteEeprom);
#endif
#if HAS_BED_PROBE
MENU_ITEM_F(ICON_ProbeSet, MSG_ZPROBE_SETTINGS, onDrawSubMenu, Draw_ProbeSet_Menu);
#endif
#if HAS_MESH
MENU_ITEM_F(ICON_ProbeSet, MSG_MESH_LEVELING, onDrawSubMenu, Draw_MeshSet_Menu);
#endif
#if HAS_HOME_OFFSET
MENU_ITEM_F(ICON_HomeOffset, MSG_SET_HOME_OFFSETS, onDrawSubMenu, Draw_HomeOffset_Menu);
#endif
#if ENABLED(PIDTEMP)
MENU_ITEM(ICON_PIDNozzle, F(STR_HOTEND_PID " Settings"), onDrawSubMenu, Draw_HotendPID_Menu);
#endif
#if ENABLED(PIDTEMPBED)
MENU_ITEM(ICON_PIDbed, F(STR_BED_PID " Settings"), onDrawSubMenu, Draw_BedPID_Menu);
#endif
MENU_ITEM_F(ICON_FilSet, MSG_FILAMENT_SET, onDrawSubMenu, Draw_FilSet_Menu);
#if ENABLED(POWER_LOSS_RECOVERY)
EDIT_ITEM_F(ICON_Pwrlossr, MSG_OUTAGE_RECOVERY, onDrawChkbMenu, SetPwrLossr, &recovery.enabled);
#endif
#if ENABLED(BAUD_RATE_GCODE)
EDIT_ITEM(ICON_SetBaudRate, F("115K baud"), onDrawChkbMenu, SetBaudRate, &HMI_data.Baud115K);
#endif
#if HAS_LCD_BRIGHTNESS
EDIT_ITEM_F(ICON_Brightness, MSG_BRIGHTNESS, onDrawPInt8Menu, SetBrightness, &ui.brightness);
MENU_ITEM_F(ICON_Brightness, MSG_BRIGHTNESS_OFF, onDrawMenuItem, TurnOffBacklight);
#endif
MENU_ITEM_F(ICON_Scolor, MSG_COLORS_SELECT, onDrawSubMenu, Draw_SelectColors_Menu);
#if ENABLED(SOUND_MENU_ITEM)
EDIT_ITEM_F(ICON_Sound, MSG_SOUND_ENABLE, onDrawChkbMenu, SetEnableSound, &ui.sound_on);
#endif
#if HAS_ESDIAG
MENU_ITEM(ICON_ESDiag, F("End-stops diag."), onDrawSubMenu, Draw_EndStopDiag);
#endif
#if ENABLED(PRINTCOUNTER)
MENU_ITEM_F(ICON_PrintStats, MSG_INFO_STATS_MENU, onDrawSubMenu, Goto_PrintStats);
MENU_ITEM_F(ICON_PrintStatsReset, MSG_INFO_PRINT_COUNT_RESET, onDrawSubMenu, PrintStats.Reset);
#endif
#if HAS_LOCKSCREEN
MENU_ITEM_F(ICON_Lock, MSG_LOCKSCREEN, onDrawMenuItem, DWIN_LockScreen);
#endif
}
ui.reset_status(true);
UpdateMenu(AdvancedSettings);
}
void Draw_Move_Menu() {
checkkey = Menu;
if (!MoveMenu) MoveMenu = new MenuClass();
if (CurrentMenu != MoveMenu) {
CurrentMenu = MoveMenu;
SetMenuTitle({192, 1, 42, 14}, GET_TEXT_F(MSG_MOVE_AXIS));
MenuItemsPrepare(5);
BACK_ITEM(Draw_Prepare_Menu);
EDIT_ITEM_F(ICON_MoveX, MSG_MOVE_X, onDrawMoveX, SetMoveX, ¤t_position.x);
EDIT_ITEM_F(ICON_MoveY, MSG_MOVE_Y, onDrawMoveY, SetMoveY, ¤t_position.y);
EDIT_ITEM_F(ICON_MoveZ, MSG_MOVE_Z, onDrawMoveZ, SetMoveZ, ¤t_position.z);
#if HAS_HOTEND
EDIT_ITEM_F(ICON_Extruder, MSG_MOVE_E, onDrawMoveE, SetMoveE, ¤t_position.e);
#endif
}
CurrentMenu->draw();
if (!all_axes_trusted()) LCD_MESSAGE_F("WARNING: Current position unknown. Home axes.");
}
#if HAS_HOME_OFFSET
void Draw_HomeOffset_Menu() {
checkkey = Menu;
if (SetMenu(HomeOffMenu, GET_TEXT_F(MSG_SET_HOME_OFFSETS), 4)) {
BACK_ITEM(Draw_AdvancedSettings_Menu);
EDIT_ITEM_F(ICON_HomeOffsetX, MSG_HOME_OFFSET_X, onDrawPFloatMenu, SetHomeOffsetX, &home_offset.x);
EDIT_ITEM_F(ICON_HomeOffsetY, MSG_HOME_OFFSET_Y, onDrawPFloatMenu, SetHomeOffsetY, &home_offset.y);
EDIT_ITEM_F(ICON_HomeOffsetZ, MSG_HOME_OFFSET_Z, onDrawPFloatMenu, SetHomeOffsetZ, &home_offset.z);
}
UpdateMenu(HomeOffMenu);
}
#endif
#if HAS_BED_PROBE
void Draw_ProbeSet_Menu() {
checkkey = Menu;
if (SetMenu(ProbeSetMenu, GET_TEXT_F(MSG_ZPROBE_SETTINGS), 8)) {
BACK_ITEM(Draw_AdvancedSettings_Menu);
EDIT_ITEM_F(ICON_ProbeOffsetX, MSG_ZPROBE_XOFFSET, onDrawPFloatMenu, SetProbeOffsetX, &probe.offset.x);
EDIT_ITEM_F(ICON_ProbeOffsetY, MSG_ZPROBE_YOFFSET, onDrawPFloatMenu, SetProbeOffsetY, &probe.offset.y);
EDIT_ITEM_F(ICON_ProbeOffsetZ, MSG_ZPROBE_ZOFFSET, onDrawPFloat2Menu, SetProbeOffsetZ, &probe.offset.z);
#if ENABLED(BLTOUCH)
MENU_ITEM_F(ICON_ProbeStow, MSG_MANUAL_STOW, onDrawMenuItem, ProbeStow);
MENU_ITEM_F(ICON_ProbeDeploy, MSG_MANUAL_DEPLOY, onDrawMenuItem, ProbeDeploy);
MENU_ITEM_F(ICON_BltouchReset, MSG_BLTOUCH_RESET, onDrawMenuItem, bltouch._reset);
#ifdef BLTOUCH_HS_MODE
EDIT_ITEM_F(ICON_HSMode, MSG_ENABLE_HS_MODE, onDrawChkbMenu, SetHSMode, &bltouch.high_speed_mode);
#endif
#endif
MENU_ITEM_F(ICON_ProbeTest, MSG_M48_TEST, onDrawMenuItem, ProbeTest);
}
UpdateMenu(ProbeSetMenu);
}
#endif
void Draw_FilSet_Menu() {
checkkey = Menu;
if (SetMenu(FilSetMenu, GET_TEXT_F(MSG_FILAMENT_SET), 9)) {
BACK_ITEM(Draw_AdvancedSettings_Menu);
#if HAS_FILAMENT_SENSOR
EDIT_ITEM_F(ICON_Runout, MSG_RUNOUT_ENABLE, onDrawChkbMenu, SetRunoutEnable, &runout.enabled);
#endif
#if HAS_FILAMENT_RUNOUT_DISTANCE
EDIT_ITEM_F(ICON_Runout, MSG_RUNOUT_DISTANCE_MM, onDrawPFloatMenu, SetRunoutDistance, &runout.runout_distance());
#endif
#if ENABLED(PREVENT_COLD_EXTRUSION)
EDIT_ITEM_F(ICON_ExtrudeMinT, MSG_EXTRUDER_MIN_TEMP, onDrawPIntMenu, SetExtMinT, &HMI_data.ExtMinT);
#endif
#if ENABLED(ADVANCED_PAUSE_FEATURE)
EDIT_ITEM_F(ICON_FilLoad, MSG_FILAMENT_LOAD, onDrawPFloatMenu, SetFilLoad, &fc_settings[0].load_length);
EDIT_ITEM_F(ICON_FilUnload, MSG_FILAMENT_UNLOAD, onDrawPFloatMenu, SetFilUnload, &fc_settings[0].unload_length);
#endif
#if ENABLED(FWRETRACT)
MENU_ITEM_F(ICON_FWRetract, MSG_FWRETRACT, onDrawSubMenu, Draw_FWRetract_Menu);
#endif
}
UpdateMenu(FilSetMenu);
}
void Draw_SelectColors_Menu() {
checkkey = Menu;
if (SetMenu(SelectColorMenu, GET_TEXT_F(MSG_COLORS_SELECT), 20)) {
BACK_ITEM(Draw_AdvancedSettings_Menu);
MENU_ITEM_F(ICON_StockConfiguration, MSG_RESTORE_DEFAULTS, onDrawMenuItem, RestoreDefaultsColors);
EDIT_ITEM(0, F("Screen Background"), onDrawSelColorItem, SelColor, &HMI_data.Background_Color);
EDIT_ITEM(0, F("Cursor"), onDrawSelColorItem, SelColor, &HMI_data.Cursor_color);
EDIT_ITEM(0, F("Title Background"), onDrawSelColorItem, SelColor, &HMI_data.TitleBg_color);
EDIT_ITEM(0, F("Title Text"), onDrawSelColorItem, SelColor, &HMI_data.TitleTxt_color);
EDIT_ITEM(0, F("Text"), onDrawSelColorItem, SelColor, &HMI_data.Text_Color);
EDIT_ITEM(0, F("Selected"), onDrawSelColorItem, SelColor, &HMI_data.Selected_Color);
EDIT_ITEM(0, F("Split Line"), onDrawSelColorItem, SelColor, &HMI_data.SplitLine_Color);
EDIT_ITEM(0, F("Highlight"), onDrawSelColorItem, SelColor, &HMI_data.Highlight_Color);
EDIT_ITEM(0, F("Status Background"), onDrawSelColorItem, SelColor, &HMI_data.StatusBg_Color);
EDIT_ITEM(0, F("Status Text"), onDrawSelColorItem, SelColor, &HMI_data.StatusTxt_Color);
EDIT_ITEM(0, F("Popup Background"), onDrawSelColorItem, SelColor, &HMI_data.PopupBg_color);
EDIT_ITEM(0, F("Popup Text"), onDrawSelColorItem, SelColor, &HMI_data.PopupTxt_Color);
EDIT_ITEM(0, F("Alert Background"), onDrawSelColorItem, SelColor, &HMI_data.AlertBg_Color);
EDIT_ITEM(0, F("Alert Text"), onDrawSelColorItem, SelColor, &HMI_data.AlertTxt_Color);
EDIT_ITEM(0, F("Percent Text"), onDrawSelColorItem, SelColor, &HMI_data.PercentTxt_Color);
EDIT_ITEM(0, F("Bar Fill"), onDrawSelColorItem, SelColor, &HMI_data.Barfill_Color);
EDIT_ITEM(0, F("Indicator value"), onDrawSelColorItem, SelColor, &HMI_data.Indicator_Color);
EDIT_ITEM(0, F("Coordinate value"), onDrawSelColorItem, SelColor, &HMI_data.Coordinate_Color);
}
UpdateMenu(SelectColorMenu);
}
void Draw_GetColor_Menu() {
checkkey = Menu;
if (SetMenu(GetColorMenu, GET_TEXT_F(MSG_COLORS_GET), 5)) {
BACK_ITEM(DWIN_ApplyColor);
MENU_ITEM_F(ICON_Cancel, MSG_BUTTON_CANCEL, onDrawMenuItem, Draw_SelectColors_Menu);
MENU_ITEM_F(0, MSG_COLORS_RED, onDrawGetColorItem, SetRGBColor);
MENU_ITEM_F(1, MSG_COLORS_GREEN, onDrawGetColorItem, SetRGBColor);
MENU_ITEM_F(2, MSG_COLORS_BLUE, onDrawGetColorItem, SetRGBColor);
}
UpdateMenu(GetColorMenu);
DWIN_Draw_Rectangle(1, *MenuData.P_Int, 20, 315, DWIN_WIDTH - 20, 335);
}
#if BOTH(CASE_LIGHT_MENU, CASELIGHT_USES_BRIGHTNESS)
void Draw_CaseLight_Menu() {
checkkey = Menu;
if (SetMenu(CaseLightMenu, GET_TEXT_F(MSG_CASE_LIGHT), 3)) {
BACK_ITEM(Draw_Control_Menu);
EDIT_ITEM_F(ICON_CaseLight, MSG_CASE_LIGHT, onDrawChkbMenu, SetCaseLight, &caselight.on);
EDIT_ITEM_F(ICON_Brightness, MSG_CASE_LIGHT_BRIGHTNESS, onDrawPInt8Menu, SetCaseLightBrightness, &caselight.brightness);
}
UpdateMenu(CaseLightMenu);
}
#endif
#if ENABLED(LED_CONTROL_MENU)
void Draw_LedControl_Menu() {
checkkey = Menu;
if (SetMenu(LedControlMenu, GET_TEXT_F(MSG_LED_CONTROL), 6)) {
BACK_ITEM(Draw_Control_Menu);
#if !BOTH(CASE_LIGHT_MENU, CASE_LIGHT_USE_NEOPIXEL)
EDIT_ITEM_F(ICON_LedControl, MSG_LEDS, onDrawChkbMenu, SetLedStatus, &leds.lights_on);
#endif
#if HAS_COLOR_LEDS
#if ENABLED(LED_COLOR_PRESETS)
MENU_ITEM_F(ICON_LedControl, MSG_SET_LEDS_WHITE, onDrawMenuItem, leds.set_white);
MENU_ITEM_F(ICON_LedControl, MSG_SET_LEDS_RED, onDrawMenuItem, leds.set_red);
MENU_ITEM_F(ICON_LedControl, MSG_SET_LEDS_ORANGE, onDrawMenuItem, leds.set_orange);
MENU_ITEM_F(ICON_LedControl, MSG_SET_LEDS_YELLOW, onDrawMenuItem, leds.set_yellow);
MENU_ITEM_F(ICON_LedControl, MSG_SET_LEDS_GREEN, onDrawMenuItem, leds.set_green);
MENU_ITEM_F(ICON_LedControl, MSG_SET_LEDS_BLUE, onDrawMenuItem, leds.set_blue);
MENU_ITEM_F(ICON_LedControl, MSG_SET_LEDS_INDIGO, onDrawMenuItem, leds.set_indigo);
MENU_ITEM_F(ICON_LedControl, MSG_SET_LEDS_VIOLET, onDrawMenuItem, leds.set_violet);
#else
EDIT_ITEM_F(ICON_LedControl, MSG_COLORS_RED, onDrawPInt8Menu, SetLEDColorR, &leds.color.r);
EDIT_ITEM_F(ICON_LedControl, MSG_COLORS_GREEN, onDrawPInt8Menu, SetLEDColorG, &leds.color.g);
EDIT_ITEM_F(ICON_LedControl, MSG_COLORS_BLUE, onDrawPInt8Menu, SetLEDColorB, &leds.color.b);
#if ENABLED(HAS_WHITE_LED)
EDIT_ITEM_F(ICON_LedControl, MSG_COLORS_WHITE, onDrawPInt8Menu, SetLEDColorW, &leds.color.w);
#endif
#endif
#endif
}
UpdateMenu(LedControlMenu);
}
#endif
void Draw_Tune_Menu() {
checkkey = Menu;
if (!TuneMenu) TuneMenu = new MenuClass();
if (CurrentMenu != TuneMenu) {
CurrentMenu = TuneMenu;
SetMenuTitle({73, 2, 28, 12}, GET_TEXT_F(MSG_TUNE)); // TODO: Chinese, English "Tune" JPG
MenuItemsPrepare(16);
BACK_ITEM(Goto_PrintProcess);
EDIT_ITEM_F(ICON_Speed, MSG_SPEED, onDrawSpeedItem, SetSpeed, &feedrate_percentage);
#if HAS_HOTEND
HotendTargetItem = EDIT_ITEM_F(ICON_HotendTemp, MSG_UBL_SET_TEMP_HOTEND, onDrawHotendTemp, SetHotendTemp, &thermalManager.temp_hotend[0].target);
#endif
#if HAS_HEATED_BED
BedTargetItem = EDIT_ITEM_F(ICON_BedTemp, MSG_UBL_SET_TEMP_BED, onDrawBedTemp, SetBedTemp, &thermalManager.temp_bed.target);
#endif
#if HAS_FAN
FanSpeedItem = EDIT_ITEM_F(ICON_FanSpeed, MSG_FAN_SPEED, onDrawFanSpeed, SetFanSpeed, &thermalManager.fan_speed[0]);
#endif
#if HAS_ZOFFSET_ITEM && EITHER(BABYSTEP_ZPROBE_OFFSET, JUST_BABYSTEP)
EDIT_ITEM_F(ICON_Zoffset, MSG_ZPROBE_ZOFFSET, onDrawZOffset, SetZOffset, &BABY_Z_VAR);
#endif
EDIT_ITEM_F(ICON_Flow, MSG_FLOW, onDrawPIntMenu, SetFlow, &planner.flow_percentage[0]);
#if ENABLED(ADVANCED_PAUSE_FEATURE)
MENU_ITEM_F(ICON_FilMan, MSG_FILAMENTCHANGE, onDrawMenuItem, ChangeFilament);
#endif
#if ENABLED(FWRETRACT)
MENU_ITEM_F(ICON_FWRetract, MSG_FWRETRACT, onDrawSubMenu, Draw_FWRetract_Menu);
#endif
#if HAS_LOCKSCREEN
MENU_ITEM_F(ICON_Lock, MSG_LOCKSCREEN, onDrawMenuItem, DWIN_LockScreen);
#endif
#if HAS_LCD_BRIGHTNESS
EDIT_ITEM_F(ICON_Brightness, MSG_BRIGHTNESS, onDrawPInt8Menu, SetBrightness, &ui.brightness);
MENU_ITEM_F(ICON_Brightness, MSG_BRIGHTNESS_OFF, onDrawMenuItem, TurnOffBacklight);
#endif
#if ENABLED(CASE_LIGHT_MENU)
EDIT_ITEM_F(ICON_CaseLight, MSG_CASE_LIGHT, onDrawChkbMenu, SetCaseLight, &caselight.on);
#elif ENABLED(LED_CONTROL_MENU) && DISABLED(CASE_LIGHT_USE_NEOPIXEL)
EDIT_ITEM_F(ICON_LedControl, MSG_LEDS, onDrawChkbMenu, SetLedStatus, &leds.lights_on);
#endif
}
CurrentMenu->draw();
}
void Draw_Motion_Menu() {
checkkey = Menu;
if (!MotionMenu) MotionMenu = new MenuClass();
if (CurrentMenu != MotionMenu) {
CurrentMenu = MotionMenu;
SetMenuTitle({1, 16, 28, 13}, GET_TEXT_F(MSG_MOTION)); // TODO: Chinese, English "Motion" JPG
MenuItemsPrepare(6);
BACK_ITEM(Draw_Control_Menu);
MENU_ITEM_F(ICON_MaxSpeed, MSG_SPEED, onDrawSpeed, Draw_MaxSpeed_Menu);
MENU_ITEM_F(ICON_MaxAccelerated, MSG_ACCELERATION, onDrawAcc, Draw_MaxAccel_Menu);
#if HAS_CLASSIC_JERK
MENU_ITEM_F(ICON_MaxJerk, MSG_JERK, onDrawJerk, Draw_MaxJerk_Menu);
#endif
MENU_ITEM_F(ICON_Step, MSG_STEPS_PER_MM, onDrawSteps, Draw_Steps_Menu);
EDIT_ITEM_F(ICON_Flow, MSG_FLOW, onDrawPIntMenu, SetFlow, &planner.flow_percentage[0]);
}
CurrentMenu->draw();
}
#if ENABLED(ADVANCED_PAUSE_FEATURE)
void Draw_FilamentMan_Menu() {
checkkey = Menu;
if (SetMenu(FilamentMenu, GET_TEXT_F(MSG_FILAMENT_MAN), 5)) {
BACK_ITEM(Draw_Prepare_Menu);
MENU_ITEM_F(ICON_Park, MSG_FILAMENT_PARK_ENABLED, onDrawMenuItem, ParkHead);
MENU_ITEM_F(ICON_FilMan, MSG_FILAMENTCHANGE, onDrawMenuItem, ChangeFilament);
#if ENABLED(FILAMENT_LOAD_UNLOAD_GCODES)
MENU_ITEM_F(ICON_FilUnload, MSG_FILAMENTUNLOAD, onDrawMenuItem, UnloadFilament);
MENU_ITEM_F(ICON_FilLoad, MSG_FILAMENTLOAD, onDrawMenuItem, LoadFilament);
#endif
}
UpdateMenu(FilamentMenu);
}
#endif
#if ENABLED(MESH_BED_LEVELING)
void Draw_ManualMesh_Menu() {
checkkey = Menu;
if (SetMenu(ManualMesh, GET_TEXT_F(MSG_UBL_MANUAL_MESH), 6)) {
BACK_ITEM(Draw_Prepare_Menu);
MENU_ITEM_F(ICON_ManualMesh, MSG_LEVEL_BED, onDrawMenuItem, ManualMeshStart);
MMeshMoveZItem = EDIT_ITEM_F(ICON_Zoffset, MSG_MOVE_Z, onDrawMMeshMoveZ, SetMMeshMoveZ, ¤t_position.z);
MENU_ITEM_F(ICON_Axis, MSG_UBL_CONTINUE_MESH, onDrawMenuItem, ManualMeshContinue);
MENU_ITEM_F(ICON_MeshViewer, MSG_MESH_VIEW, onDrawSubMenu, DWIN_MeshViewer);
MENU_ITEM_F(ICON_MeshSave, MSG_UBL_SAVE_MESH, onDrawMenuItem, ManualMeshSave);
}
UpdateMenu(ManualMesh);
}
#endif
#if HAS_PREHEAT
void Draw_Preheat_Menu(frame_rect_t cn, const __FlashStringHelper* fstr) {
checkkey = Menu;
if (CurrentMenu != PreheatMenu) {
CurrentMenu = PreheatMenu;
SetMenuTitle(cn, fstr);
MenuItemsPrepare(5);
BACK_ITEM(Draw_Temperature_Menu);
#if HAS_HOTEND
EDIT_ITEM_F(ICON_SetEndTemp, MSG_UBL_SET_TEMP_HOTEND, onDrawSetPreheatHotend, SetPreheatEndTemp, &ui.material_preset[HMI_value.Select].hotend_temp);
#endif
#if HAS_HEATED_BED
EDIT_ITEM_F(ICON_SetBedTemp, MSG_UBL_SET_TEMP_BED, onDrawSetPreheatBed, SetPreheatBedTemp, &ui.material_preset[HMI_value.Select].bed_temp);
#endif
#if HAS_FAN
EDIT_ITEM_F(ICON_FanSpeed, MSG_FAN_SPEED, onDrawSetPreheatFan, SetPreheatFanSpeed, &ui.material_preset[HMI_value.Select].fan_speed);
#endif
#if ENABLED(EEPROM_SETTINGS)
MENU_ITEM_F(ICON_WriteEEPROM, MSG_STORE_EEPROM, onDrawWriteEeprom, WriteEeprom);
#endif
}
CurrentMenu->draw();
}
void Draw_Preheat1_Menu() {
HMI_value.Select = 0;
if (!PreheatMenu) PreheatMenu = new MenuClass();
Draw_Preheat_Menu({59, 16, 81, 14}, F(PREHEAT_1_LABEL " Preheat Settings")); // TODO: English "PLA Settings" JPG
}
#if PREHEAT_COUNT >= 2
void Draw_Preheat2_Menu() {
HMI_value.Select = 1;
if (!PreheatMenu) PreheatMenu = new MenuClass();
Draw_Preheat_Menu({142, 16, 82, 14}, F(PREHEAT_2_LABEL " Preheat Settings")); // TODO: English "ABS Settings" JPG
}
#endif
#if PREHEAT_COUNT >= 3
void Draw_Preheat3_Menu() {
HMI_value.Select = 2;
if (!PreheatMenu) PreheatMenu = new MenuClass();
Draw_Preheat_Menu({225, 16, 82, 14}, F(PREHEAT_3_LABEL " Preheat Settings")); // TODO: English "... Settings" JPG
}
#endif
#endif // HAS_PREHEAT
void Draw_Temperature_Menu() {
checkkey = Menu;
if (!TemperatureMenu) TemperatureMenu = new MenuClass();
if (CurrentMenu != TemperatureMenu) {
CurrentMenu = TemperatureMenu;
SetMenuTitle({236, 2, 28, 12}, GET_TEXT_F(MSG_TEMPERATURE));
MenuItemsPrepare(7);
BACK_ITEM(Draw_Control_Menu);
#if HAS_HOTEND
HotendTargetItem = EDIT_ITEM_F(ICON_SetEndTemp, MSG_UBL_SET_TEMP_HOTEND, onDrawHotendTemp, SetHotendTemp, &thermalManager.temp_hotend[0].target);
#endif
#if HAS_HEATED_BED
BedTargetItem = EDIT_ITEM_F(ICON_SetBedTemp, MSG_UBL_SET_TEMP_BED, onDrawBedTemp, SetBedTemp, &thermalManager.temp_bed.target);
#endif
#if HAS_FAN
FanSpeedItem = EDIT_ITEM_F(ICON_FanSpeed, MSG_FAN_SPEED, onDrawFanSpeed, SetFanSpeed, &thermalManager.fan_speed[0]);
#endif
#if HAS_PREHEAT
MENU_ITEM_F(ICON_SetPLAPreheat, MSG_PREHEAT_1_SETTINGS, onDrawPLAPreheatSubMenu, Draw_Preheat1_Menu);
#if PREHEAT_COUNT >= 2
MENU_ITEM_F(ICON_SetABSPreheat, MSG_PREHEAT_2_SETTINGS, onDrawABSPreheatSubMenu, Draw_Preheat2_Menu);
#if PREHEAT_COUNT >= 3
MENU_ITEM_F(ICON_SetCustomPreheat, MSG_PREHEAT_3_SETTINGS, onDrawSubMenu, Draw_Preheat3_Menu);
#endif
#endif
#endif
}
CurrentMenu->draw();
}
void Draw_MaxSpeed_Menu() {
checkkey = Menu;
if (!MaxSpeedMenu) MaxSpeedMenu = new MenuClass();
if (CurrentMenu != MaxSpeedMenu) {
CurrentMenu = MaxSpeedMenu;
SetMenuTitle({1, 16, 28, 13}, GET_TEXT_F(MSG_MAX_SPEED));
MenuItemsPrepare(5);
BACK_ITEM(Draw_Motion_Menu);
EDIT_ITEM_F(ICON_MaxSpeedX, MSG_VMAX_A, onDrawMaxSpeedX, SetMaxSpeedX, &planner.settings.max_feedrate_mm_s[X_AXIS]);
EDIT_ITEM_F(ICON_MaxSpeedY, MSG_VMAX_B, onDrawMaxSpeedY, SetMaxSpeedY, &planner.settings.max_feedrate_mm_s[Y_AXIS]);
EDIT_ITEM_F(ICON_MaxSpeedZ, MSG_VMAX_C, onDrawMaxSpeedZ, SetMaxSpeedZ, &planner.settings.max_feedrate_mm_s[Z_AXIS]);
#if HAS_HOTEND
EDIT_ITEM_F(ICON_MaxSpeedE, MSG_VMAX_E, onDrawMaxSpeedE, SetMaxSpeedE, &planner.settings.max_feedrate_mm_s[E_AXIS]);
#endif
}
CurrentMenu->draw();
}
void Draw_MaxAccel_Menu() {
checkkey = Menu;
if (!MaxAccelMenu) MaxAccelMenu = new MenuClass();
if (CurrentMenu != MaxAccelMenu) {
CurrentMenu = MaxAccelMenu;
SetMenuTitle({1, 16, 28, 13}, GET_TEXT_F(MSG_ACCELERATION));
MenuItemsPrepare(5);
BACK_ITEM(Draw_Motion_Menu);
EDIT_ITEM_F(ICON_MaxAccX, MSG_AMAX_A, onDrawMaxAccelX, SetMaxAccelX, &planner.settings.max_acceleration_mm_per_s2[X_AXIS]);
EDIT_ITEM_F(ICON_MaxAccY, MSG_AMAX_B, onDrawMaxAccelY, SetMaxAccelY, &planner.settings.max_acceleration_mm_per_s2[Y_AXIS]);
EDIT_ITEM_F(ICON_MaxAccZ, MSG_AMAX_C, onDrawMaxAccelZ, SetMaxAccelZ, &planner.settings.max_acceleration_mm_per_s2[Z_AXIS]);
#if HAS_HOTEND
EDIT_ITEM_F(ICON_MaxAccE, MSG_AMAX_E, onDrawMaxAccelE, SetMaxAccelE, &planner.settings.max_acceleration_mm_per_s2[E_AXIS]);
#endif
}
CurrentMenu->draw();
}
#if HAS_CLASSIC_JERK
void Draw_MaxJerk_Menu() {
checkkey = Menu;
if (!MaxJerkMenu) MaxJerkMenu = new MenuClass();
if (CurrentMenu != MaxJerkMenu) {
CurrentMenu = MaxJerkMenu;
SetMenuTitle({1, 16, 28, 13}, GET_TEXT_F(MSG_JERK));
MenuItemsPrepare(5);
BACK_ITEM(Draw_Motion_Menu);
EDIT_ITEM_F(ICON_MaxSpeedJerkX, MSG_VA_JERK, onDrawMaxJerkX, SetMaxJerkX, &planner.max_jerk[X_AXIS]);
EDIT_ITEM_F(ICON_MaxSpeedJerkY, MSG_VB_JERK, onDrawMaxJerkY, SetMaxJerkY, &planner.max_jerk[Y_AXIS]);
EDIT_ITEM_F(ICON_MaxSpeedJerkZ, MSG_VC_JERK, onDrawMaxJerkZ, SetMaxJerkZ, &planner.max_jerk[Z_AXIS]);
#if HAS_HOTEND
EDIT_ITEM_F(ICON_MaxSpeedJerkE, MSG_VE_JERK, onDrawMaxJerkE, SetMaxJerkE, &planner.max_jerk[E_AXIS]);
#endif
}
CurrentMenu->draw();
}
#endif
void Draw_Steps_Menu() {
checkkey = Menu;
if (!StepsMenu) StepsMenu = new MenuClass();
if (CurrentMenu != StepsMenu) {
CurrentMenu = StepsMenu;
SetMenuTitle({1, 16, 28, 13}, GET_TEXT_F(MSG_STEPS_PER_MM));
MenuItemsPrepare(5);
BACK_ITEM(Draw_Motion_Menu);
EDIT_ITEM_F(ICON_StepX, MSG_A_STEPS, onDrawStepsX, SetStepsX, &planner.settings.axis_steps_per_mm[X_AXIS]);
EDIT_ITEM_F(ICON_StepY, MSG_B_STEPS, onDrawStepsY, SetStepsY, &planner.settings.axis_steps_per_mm[Y_AXIS]);
EDIT_ITEM_F(ICON_StepZ, MSG_C_STEPS, onDrawStepsZ, SetStepsZ, &planner.settings.axis_steps_per_mm[Z_AXIS]);
#if HAS_HOTEND
EDIT_ITEM_F(ICON_StepE, MSG_E_STEPS, onDrawStepsE, SetStepsE, &planner.settings.axis_steps_per_mm[E_AXIS]);
#endif
}
CurrentMenu->draw();
}
#if ENABLED(PIDTEMP)
void Draw_HotendPID_Menu() {
checkkey = Menu;
if (SetMenu(HotendPIDMenu, F(STR_HOTEND_PID " Settings"), 8)) {
BACK_ITEM(Draw_AdvancedSettings_Menu);
MENU_ITEM(ICON_PIDNozzle, F(STR_HOTEND_PID), onDrawMenuItem, HotendPID);
EDIT_ITEM(ICON_PIDValue, F("Set" STR_KP), onDrawPFloat2Menu, SetKp, &thermalManager.temp_hotend[0].pid.Kp);
EDIT_ITEM(ICON_PIDValue, F("Set" STR_KI), onDrawPIDi, SetKi, &thermalManager.temp_hotend[0].pid.Ki);
EDIT_ITEM(ICON_PIDValue, F("Set" STR_KD), onDrawPIDd, SetKd, &thermalManager.temp_hotend[0].pid.Kd);
EDIT_ITEM_F(ICON_Temperature, MSG_TEMPERATURE, onDrawPIntMenu, SetHotendPidT, &HMI_data.HotendPidT);
EDIT_ITEM_F(ICON_PIDcycles, MSG_PID_CYCLE, onDrawPIntMenu, SetPidCycles, &HMI_data.PidCycles);
#if ENABLED(EEPROM_SETTINGS)
MENU_ITEM_F(ICON_WriteEEPROM, MSG_STORE_EEPROM, onDrawMenuItem, WriteEeprom);
#endif
}
UpdateMenu(HotendPIDMenu);
}
#endif
#if ENABLED(PIDTEMPBED)
void Draw_BedPID_Menu() {
checkkey = Menu;
if (SetMenu(BedPIDMenu, F(STR_BED_PID " Settings"), 8)) {
BACK_ITEM(Draw_AdvancedSettings_Menu);
MENU_ITEM(ICON_PIDNozzle, F(STR_BED_PID), onDrawMenuItem,BedPID);
EDIT_ITEM(ICON_PIDValue, F("Set" STR_KP), onDrawPFloat2Menu, SetKp, &thermalManager.temp_bed.pid.Kp);
EDIT_ITEM(ICON_PIDValue, F("Set" STR_KI), onDrawPIDi, SetKi, &thermalManager.temp_bed.pid.Ki);
EDIT_ITEM(ICON_PIDValue, F("Set" STR_KD), onDrawPIDd, SetKd, &thermalManager.temp_bed.pid.Kd);
EDIT_ITEM_F(ICON_Temperature, MSG_TEMPERATURE, onDrawPIntMenu, SetBedPidT, &HMI_data.BedPidT);
EDIT_ITEM_F(ICON_PIDcycles, MSG_PID_CYCLE, onDrawPIntMenu, SetPidCycles, &HMI_data.PidCycles);
#if ENABLED(EEPROM_SETTINGS)
MENU_ITEM_F(ICON_WriteEEPROM, MSG_STORE_EEPROM, onDrawMenuItem, WriteEeprom);
#endif
}
UpdateMenu(BedPIDMenu);
}
#endif
#if ENABLED(BABYSTEP_ZPROBE_OFFSET)
void Draw_ZOffsetWiz_Menu() {
checkkey = Menu;
if (SetMenu(ZOffsetWizMenu, GET_TEXT_F(MSG_PROBE_WIZARD), 4)) {
BACK_ITEM(Draw_Prepare_Menu);
MENU_ITEM_F(ICON_Homing, MSG_AUTO_HOME, onDrawMenuItem, AutoHome);
MENU_ITEM(ICON_MoveZ0, F("Move Z to Home"), onDrawMenuItem, SetMoveZto0);
EDIT_ITEM_F(ICON_Zoffset, MSG_ZPROBE_ZOFFSET, onDrawPFloat2Menu, SetZOffset, &BABY_Z_VAR);
}
UpdateMenu(ZOffsetWizMenu);
if (!axis_is_trusted(Z_AXIS)) LCD_MESSAGE_F("WARNING: Z position unknown, move Z to home");
}
#endif
#if ENABLED(INDIVIDUAL_AXIS_HOMING_SUBMENU)
void Draw_Homing_Menu() {
checkkey = Menu;
if (SetMenu(HomingMenu, GET_TEXT_F(MSG_HOMING), 5)) {
BACK_ITEM(Draw_Prepare_Menu);
MENU_ITEM_F(ICON_Homing, MSG_AUTO_HOME, onDrawMenuItem, AutoHome);
MENU_ITEM_F(ICON_HomeX, MSG_AUTO_HOME_X, onDrawMenuItem, HomeX);
MENU_ITEM_F(ICON_HomeY, MSG_AUTO_HOME_Y, onDrawMenuItem, HomeY);
MENU_ITEM_F(ICON_HomeZ, MSG_AUTO_HOME_Z, onDrawMenuItem, HomeZ);
}
UpdateMenu(HomingMenu);
}
#endif
#if ENABLED(FWRETRACT)
void Draw_FWRetract_Menu() {
checkkey = Menu;
if (SetMenu(FWRetractMenu, GET_TEXT_F(MSG_FWRETRACT), 6)) {
BACK_ITEM(Return_FWRetract_Menu);
EDIT_ITEM_F(ICON_FWRetLength, MSG_CONTROL_RETRACT, onDrawPFloatMenu, SetRetractLength, &fwretract.settings.retract_length);
EDIT_ITEM_F(ICON_FWRetSpeed, MSG_SINGLENOZZLE_RETRACT_SPEED, onDrawPFloatMenu, SetRetractSpeed, &fwretract.settings.retract_feedrate_mm_s);
EDIT_ITEM_F(ICON_FWRetZRaise, MSG_CONTROL_RETRACT_ZHOP, onDrawPFloat2Menu, SetZRaise, &fwretract.settings.retract_zraise);
EDIT_ITEM_F(ICON_FWRecSpeed, MSG_SINGLENOZZLE_UNRETRACT_SPEED, onDrawPFloatMenu, SetRecoverSpeed, &fwretract.settings.retract_recover_feedrate_mm_s);
EDIT_ITEM_F(ICON_FWRecExtra, MSG_CONTROL_RETRACT_RECOVER, onDrawPFloatMenu, SetAddRecover, &fwretract.settings.retract_recover_extra);
}
UpdateMenu(FWRetractMenu);
}
#endif
//=============================================================================
// Mesh Bed Leveling
//=============================================================================
#if HAS_MESH
void ApplyMeshFadeHeight() { set_z_fade_height(planner.z_fade_height); }
void SetMeshFadeHeight() { SetPFloatOnClick(0, 100, 1, ApplyMeshFadeHeight); }
void SetMeshActive() {
set_bed_leveling_enabled(!planner.leveling_active);
Draw_Chkb_Line(CurrentMenu->line(), planner.leveling_active);
DWIN_UpdateLCD();
}
#if BOTH(HAS_HEATED_BED, PREHEAT_BEFORE_LEVELING)
void SetBedLevT() { SetPIntOnClick(MIN_BEDTEMP, MAX_BEDTEMP); }
#endif
#if ENABLED(MESH_EDIT_MENU)
#define Z_OFFSET_MIN -3
#define Z_OFFSET_MAX 3
void LiveEditMesh() { ((MenuItemPtrClass*)EditZValueItem)->value = &bedlevel.z_values[HMI_value.Select ? BedLevelTools.mesh_x : MenuData.Value][HMI_value.Select ? MenuData.Value : BedLevelTools.mesh_y]; EditZValueItem->redraw(); }
void ApplyEditMeshX() { BedLevelTools.mesh_x = MenuData.Value; }
void SetEditMeshX() { HMI_value.Select = 0; SetIntOnClick(0, GRID_MAX_POINTS_X - 1, BedLevelTools.mesh_x, ApplyEditMeshX, LiveEditMesh); }
void ApplyEditMeshY() { BedLevelTools.mesh_y = MenuData.Value; }
void SetEditMeshY() { HMI_value.Select = 1; SetIntOnClick(0, GRID_MAX_POINTS_Y - 1, BedLevelTools.mesh_y, ApplyEditMeshY, LiveEditMesh); }
void SetEditZValue() { SetPFloatOnClick(Z_OFFSET_MIN, Z_OFFSET_MAX, 3); }
#endif
#endif
#if ENABLED(AUTO_BED_LEVELING_UBL)
void ApplyUBLSlot() { bedlevel.storage_slot = MenuData.Value; }
void SetUBLSlot() { SetIntOnClick(0, settings.calc_num_meshes() - 1, bedlevel.storage_slot, ApplyUBLSlot); }
void onDrawUBLSlot(MenuItemClass* menuitem, int8_t line) {
if (bedlevel.storage_slot < 0) bedlevel.storage_slot = 0;
onDrawIntMenu(menuitem, line, bedlevel.storage_slot);
}
void ApplyUBLTiltGrid() { BedLevelTools.tilt_grid = MenuData.Value; }
void SetUBLTiltGrid() { SetIntOnClick(1, 3, BedLevelTools.tilt_grid, ApplyUBLTiltGrid); }
void UBLTiltMesh() {
if (bedlevel.storage_slot < 0) bedlevel.storage_slot = 0;
char buf[15];
if (BedLevelTools.tilt_grid > 1) {
sprintf_P(buf, PSTR("G28O\nG29 J%i"), BedLevelTools.tilt_grid);
gcode.process_subcommands_now(buf);
}
else
gcode.process_subcommands_now(F("G28O\nG29J"));
LCD_MESSAGE(MSG_UBL_MESH_TILTED);
}
void UBLSmartFillMesh() {
LOOP_L_N(x, GRID_MAX_POINTS_Y) bedlevel.smart_fill_mesh();
LCD_MESSAGE(MSG_UBL_MESH_FILLED);
}
void UBLSaveMesh() {
if (bedlevel.storage_slot < 0) bedlevel.storage_slot = 0;
settings.store_mesh(bedlevel.storage_slot);
ui.status_printf(0, GET_TEXT_F(MSG_MESH_SAVED), bedlevel.storage_slot);
DONE_BUZZ(true);
}
void UBLLoadMesh() {
if (bedlevel.storage_slot < 0) bedlevel.storage_slot = 0;
settings.load_mesh(bedlevel.storage_slot);
}
#endif // AUTO_BED_LEVELING_UBL
#if HAS_MESH
void Draw_MeshSet_Menu() {
checkkey = Menu;
if (SetMenu(MeshMenu, GET_TEXT_F(MSG_MESH_LEVELING), 15)) {
BACK_ITEM(Draw_AdvancedSettings_Menu);
#if BOTH(HAS_HEATED_BED, PREHEAT_BEFORE_LEVELING)
EDIT_ITEM_F(ICON_Temperature, MSG_UBL_SET_TEMP_BED, onDrawPIntMenu, SetBedLevT, &HMI_data.BedLevT);
#endif
EDIT_ITEM_F(ICON_SetZOffset, MSG_Z_FADE_HEIGHT, onDrawPFloatMenu, SetMeshFadeHeight, &planner.z_fade_height);
EDIT_ITEM_F(ICON_UBLActive, MSG_ACTIVATE_MESH, onDrawChkbMenu, SetMeshActive, &planner.leveling_active);
#if HAS_BED_PROBE
MENU_ITEM_F(ICON_Level, MSG_AUTO_MESH, onDrawMenuItem, AutoLev);
#endif
#if ENABLED(AUTO_BED_LEVELING_UBL)
EDIT_ITEM_F(ICON_UBLActive, MSG_UBL_STORAGE_SLOT, onDrawUBLSlot, SetUBLSlot, &bedlevel.storage_slot);
MENU_ITEM_F(ICON_UBLActive, MSG_UBL_SAVE_MESH, onDrawMenuItem, UBLSaveMesh);
MENU_ITEM_F(ICON_UBLActive, MSG_UBL_LOAD_MESH, onDrawMenuItem, UBLLoadMesh);
EDIT_ITEM_F(ICON_UBLActive, MSG_UBL_TILTING_GRID, onDrawPInt8Menu, SetUBLTiltGrid, &BedLevelTools.tilt_grid);
MENU_ITEM_F(ICON_UBLActive, MSG_UBL_TILT_MESH, onDrawMenuItem, UBLTiltMesh);
MENU_ITEM_F(ICON_UBLActive, MSG_UBL_SMART_FILLIN, onDrawMenuItem, UBLSmartFillMesh);
#endif
#if ENABLED(MESH_EDIT_MENU)
MENU_ITEM_F(ICON_UBLActive, MSG_EDIT_MESH, onDrawSubMenu, Draw_EditMesh_Menu);
#endif
MENU_ITEM_F(ICON_MeshViewer, MSG_MESH_VIEW, onDrawSubMenu, DWIN_MeshViewer);
}
UpdateMenu(MeshMenu);
}
#if ENABLED(MESH_EDIT_MENU)
void Draw_EditMesh_Menu() {
if (!leveling_is_valid()) { LCD_MESSAGE(MSG_UBL_MESH_INVALID); return; }
set_bed_leveling_enabled(false);
checkkey = Menu;
if (SetMenu(EditMeshMenu, GET_TEXT_F(MSG_EDIT_MESH), 4)) {
BedLevelTools.mesh_x = BedLevelTools.mesh_y = 0;
BACK_ITEM(Draw_MeshSet_Menu);
EDIT_ITEM_F(ICON_UBLActive, MSG_MESH_X, onDrawPInt8Menu, SetEditMeshX,&BedLevelTools.mesh_x);
EDIT_ITEM_F(ICON_UBLActive, MSG_MESH_Y, onDrawPInt8Menu, SetEditMeshY,&BedLevelTools.mesh_y);
EditZValueItem = EDIT_ITEM_F(ICON_UBLActive, MSG_MESH_EDIT_Z, onDrawPFloat3Menu, SetEditZValue, &bedlevel.z_values[BedLevelTools.mesh_x][BedLevelTools.mesh_y]);
}
UpdateMenu(EditMeshMenu);
}
#endif
#endif // HAS_MESH
#endif // DWIN_LCD_PROUI