/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see .
*
*/
/**
* lcd/e3v2/jyersui/dwin.cpp
*/
#include "../../../inc/MarlinConfigPre.h"
#if ENABLED(DWIN_CREALITY_LCD_JYERSUI)
#include "dwin.h"
#include "../../marlinui.h"
#include "../../../MarlinCore.h"
#include "../../../gcode/gcode.h"
#include "../../../module/temperature.h"
#include "../../../module/planner.h"
#include "../../../module/settings.h"
#include "../../../libs/buzzer.h"
#include "../../../inc/Conditionals_post.h"
//#define DEBUG_OUT 1
#include "../../../core/debug_out.h"
#if ENABLED(ADVANCED_PAUSE_FEATURE)
#include "../../../feature/pause.h"
#endif
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
#include "../../../feature/runout.h"
#endif
#if ENABLED(HOST_ACTION_COMMANDS)
#include "../../../feature/host_actions.h"
#endif
#if ANY(BABYSTEPPING, HAS_BED_PROBE, HAS_WORKSPACE_OFFSET)
#define HAS_ZOFFSET_ITEM 1
#endif
#ifndef strcasecmp_P
#define strcasecmp_P(a, b) strcasecmp((a), (b))
#endif
#if HAS_LEVELING
#include "../../../feature/bedlevel/bedlevel.h"
#endif
#if ENABLED(AUTO_BED_LEVELING_UBL)
#include "../../../libs/least_squares_fit.h"
#include "../../../libs/vector_3.h"
#endif
#if HAS_BED_PROBE
#include "../../../module/probe.h"
#endif
#if ENABLED(POWER_LOSS_RECOVERY)
#include "../../../feature/powerloss.h"
#endif
#define MACHINE_SIZE STRINGIFY(X_BED_SIZE) "x" STRINGIFY(Y_BED_SIZE) "x" STRINGIFY(Z_MAX_POS)
#define DWIN_FONT_MENU font8x16
#define DWIN_FONT_STAT font10x20
#define DWIN_FONT_HEAD font10x20
#define MENU_CHAR_LIMIT 24
#define STATUS_Y 352
#define MAX_PRINT_SPEED 500
#define MIN_PRINT_SPEED 10
#if HAS_FAN
#define MAX_FAN_SPEED 255
#define MIN_FAN_SPEED 0
#endif
#define MAX_XY_OFFSET 100
#if HAS_ZOFFSET_ITEM
#define MAX_Z_OFFSET 9.99
#if HAS_BED_PROBE
#define MIN_Z_OFFSET -9.99
#else
#define MIN_Z_OFFSET -1
#endif
#endif
#if HAS_HOTEND
#define MAX_FLOW_RATE 200
#define MIN_FLOW_RATE 10
#define MAX_E_TEMP (HEATER_0_MAXTEMP - HOTEND_OVERSHOOT)
#define MIN_E_TEMP 0
#endif
#if HAS_HEATED_BED
#define MAX_BED_TEMP BED_MAXTEMP
#define MIN_BED_TEMP 0
#endif
/**
* Custom menu items with jyersLCD
*/
#if ENABLED(CUSTOM_MENU_CONFIG)
#ifdef CONFIG_MENU_ITEM_5_DESC
#define CUSTOM_MENU_COUNT 5
#elif defined(CONFIG_MENU_ITEM_4_DESC)
#define CUSTOM_MENU_COUNT 4
#elif defined(CONFIG_MENU_ITEM_3_DESC)
#define CUSTOM_MENU_COUNT 3
#elif defined(CONFIG_MENU_ITEM_2_DESC)
#define CUSTOM_MENU_COUNT 2
#elif defined(CONFIG_MENU_ITEM_1_DESC)
#define CUSTOM_MENU_COUNT 1
#endif
#if CUSTOM_MENU_COUNT
#define HAS_CUSTOM_MENU 1
#endif
#endif
constexpr uint16_t TROWS = 6, MROWS = TROWS - 1,
TITLE_HEIGHT = 30,
MLINE = 53,
LBLX = 60,
MENU_CHR_W = 8, MENU_CHR_H = 16, STAT_CHR_W = 10;
#define MBASE(L) (49 + MLINE * (L))
constexpr float default_max_feedrate[] = DEFAULT_MAX_FEEDRATE;
constexpr float default_max_acceleration[] = DEFAULT_MAX_ACCELERATION;
constexpr float default_steps[] = DEFAULT_AXIS_STEPS_PER_UNIT;
#if HAS_CLASSIC_JERK
constexpr float default_max_jerk[] = { DEFAULT_XJERK, DEFAULT_YJERK, DEFAULT_ZJERK, DEFAULT_EJERK };
#endif
enum SelectItem : uint8_t {
PAGE_PRINT = 0,
PAGE_PREPARE,
PAGE_CONTROL,
PAGE_INFO_LEVELING,
PAGE_COUNT,
PRINT_SETUP = 0,
PRINT_PAUSE_RESUME,
PRINT_STOP,
PRINT_COUNT
};
uint8_t active_menu = MainMenu, last_menu = MainMenu;
uint8_t selection = 0, last_selection = 0;
uint8_t scrollpos = 0;
uint8_t process = Main, last_process = Main;
PopupID popup, last_popup;
void (*funcpointer)() = nullptr;
void *valuepointer = nullptr;
float tempvalue;
float valuemin;
float valuemax;
uint8_t valueunit;
uint8_t valuetype;
char cmd[MAX_CMD_SIZE+16], str_1[16], str_2[16], str_3[16];
char statusmsg[64];
char filename[LONG_FILENAME_LENGTH];
bool printing = false;
bool paused = false;
bool sdprint = false;
int16_t pausetemp, pausebed, pausefan;
bool livemove = false;
bool liveadjust = false;
uint8_t preheatmode = 0;
float zoffsetvalue = 0;
uint8_t gridpoint;
float corner_avg;
float corner_pos;
bool probe_deployed = false;
CrealityDWINClass CrealityDWIN;
template
class TextScroller {
public:
static const unsigned SIZE = N;
static const unsigned SPACE = S;
typedef char Buffer[SIZE + 1];
inline TextScroller()
: scrollpos(0)
{ }
inline void reset() {
scrollpos = 0;
}
const char* scroll(size_t& pos, Buffer &buf, const char * text, bool *updated = nullptr) {
const size_t len = strlen(text);
if (len > SIZE) {
if (updated) *updated = true;
if (scrollpos >= len + SPACE) scrollpos = 0;
pos = 0;
if (scrollpos < len) {
const size_t n = min(len - scrollpos, SIZE);
memcpy(buf, text + scrollpos, n);
pos += n;
}
if (pos < SIZE) {
const size_t n = min(len + SPACE - scrollpos, SIZE - pos);
memset(buf + pos, ' ', n);
pos += n;
}
if (pos < SIZE) {
const size_t n = SIZE - pos;
memcpy(buf + pos, text, n);
pos += n;
}
buf[pos] = '\0';
++scrollpos;
return buf;
} else {
pos = len;
return text;
}
}
private:
uint16_t scrollpos;
};
#if HAS_MESH
struct Mesh_Settings {
bool viewer_asymmetric_range = false;
bool viewer_print_value = false;
bool goto_mesh_value = false;
bool drawing_mesh = false;
uint8_t mesh_x = 0;
uint8_t mesh_y = 0;
#if ENABLED(AUTO_BED_LEVELING_UBL)
uint8_t tilt_grid = 1;
void manual_value_update(bool undefined=false) {
sprintf_P(cmd, PSTR("M421 I%i J%i Z%s %s"), mesh_x, mesh_y, dtostrf(current_position.z, 1, 3, str_1), undefined ? "N" : "");
gcode.process_subcommands_now(cmd);
planner.synchronize();
}
bool create_plane_from_mesh() {
struct linear_fit_data lsf_results;
incremental_LSF_reset(&lsf_results);
GRID_LOOP(x, y) {
if (!isnan(bedlevel.z_values[x][y])) {
xy_pos_t rpos = { bedlevel.get_mesh_x(x), bedlevel.get_mesh_y(y) };
incremental_LSF(&lsf_results, rpos, bedlevel.z_values[x][y]);
}
}
if (finish_incremental_LSF(&lsf_results)) {
SERIAL_ECHOPGM("Could not complete LSF!");
return true;
}
bedlevel.set_all_mesh_points_to_value(0);
matrix_3x3 rotation = matrix_3x3::create_look_at(vector_3(lsf_results.A, lsf_results.B, 1));
GRID_LOOP(i, j) {
float mx = bedlevel.get_mesh_x(i),
my = bedlevel.get_mesh_y(j),
mz = bedlevel.z_values[i][j];
if (DEBUGGING(LEVELING)) {
DEBUG_ECHOPAIR_F("before rotation = [", mx, 7);
DEBUG_CHAR(',');
DEBUG_ECHO_F(my, 7);
DEBUG_CHAR(',');
DEBUG_ECHO_F(mz, 7);
DEBUG_ECHOPGM("] ---> ");
DEBUG_DELAY(20);
}
rotation.apply_rotation_xyz(mx, my, mz);
if (DEBUGGING(LEVELING)) {
DEBUG_ECHOPAIR_F("after rotation = [", mx, 7);
DEBUG_CHAR(',');
DEBUG_ECHO_F(my, 7);
DEBUG_CHAR(',');
DEBUG_ECHO_F(mz, 7);
DEBUG_ECHOLNPGM("]");
DEBUG_DELAY(20);
}
bedlevel.z_values[i][j] = mz - lsf_results.D;
}
return false;
}
#else
void manual_value_update() {
sprintf_P(cmd, PSTR("G29 I%i J%i Z%s"), mesh_x, mesh_y, dtostrf(current_position.z, 1, 3, str_1));
gcode.process_subcommands_now(cmd);
planner.synchronize();
}
#endif
void manual_mesh_move(const bool zmove=false) {
if (zmove) {
planner.synchronize();
current_position.z = goto_mesh_value ? bedlevel.z_values[mesh_x][mesh_y] : Z_CLEARANCE_BETWEEN_PROBES;
planner.buffer_line(current_position, homing_feedrate(Z_AXIS), active_extruder);
planner.synchronize();
}
else {
CrealityDWIN.Popup_Handler(MoveWait);
sprintf_P(cmd, PSTR("G0 F300 Z%s"), dtostrf(Z_CLEARANCE_BETWEEN_PROBES, 1, 3, str_1));
gcode.process_subcommands_now(cmd);
sprintf_P(cmd, PSTR("G42 F4000 I%i J%i"), mesh_x, mesh_y);
gcode.process_subcommands_now(cmd);
planner.synchronize();
current_position.z = goto_mesh_value ? bedlevel.z_values[mesh_x][mesh_y] : Z_CLEARANCE_BETWEEN_PROBES;
planner.buffer_line(current_position, homing_feedrate(Z_AXIS), active_extruder);
planner.synchronize();
CrealityDWIN.Redraw_Menu();
}
}
float get_max_value() {
float max = __FLT_MIN__;
GRID_LOOP(x, y) {
if (!isnan(bedlevel.z_values[x][y]) && bedlevel.z_values[x][y] > max)
max = bedlevel.z_values[x][y];
}
return max;
}
float get_min_value() {
float min = __FLT_MAX__;
GRID_LOOP(x, y) {
if (!isnan(bedlevel.z_values[x][y]) && bedlevel.z_values[x][y] < min)
min = bedlevel.z_values[x][y];
}
return min;
}
void Draw_Bed_Mesh(int16_t selected = -1, uint8_t gridline_width = 1, uint16_t padding_x = 8, uint16_t padding_y_top = 40 + 53 - 7) {
drawing_mesh = true;
const uint16_t total_width_px = DWIN_WIDTH - padding_x - padding_x,
cell_width_px = total_width_px / (GRID_MAX_POINTS_X),
cell_height_px = total_width_px / (GRID_MAX_POINTS_Y);
const float v_max = abs(get_max_value()), v_min = abs(get_min_value()), range = _MAX(v_min, v_max);
// Clear background from previous selection and select new square
DWIN_Draw_Rectangle(1, Color_Bg_Black, _MAX(0, padding_x - gridline_width), _MAX(0, padding_y_top - gridline_width), padding_x + total_width_px, padding_y_top + total_width_px);
if (selected >= 0) {
const auto selected_y = selected / (GRID_MAX_POINTS_X);
const auto selected_x = selected - (GRID_MAX_POINTS_X) * selected_y;
const auto start_y_px = padding_y_top + selected_y * cell_height_px;
const auto start_x_px = padding_x + selected_x * cell_width_px;
DWIN_Draw_Rectangle(1, Color_White, _MAX(0, start_x_px - gridline_width), _MAX(0, start_y_px - gridline_width), start_x_px + cell_width_px, start_y_px + cell_height_px);
}
// Draw value square grid
char buf[8];
GRID_LOOP(x, y) {
const auto start_x_px = padding_x + x * cell_width_px;
const auto end_x_px = start_x_px + cell_width_px - 1 - gridline_width;
const auto start_y_px = padding_y_top + (GRID_MAX_POINTS_Y - y - 1) * cell_height_px;
const auto end_y_px = start_y_px + cell_height_px - 1 - gridline_width;
DWIN_Draw_Rectangle(1, // RGB565 colors: http://www.barth-dev.de/online/rgb565-color-picker/
isnan(bedlevel.z_values[x][y]) ? Color_Grey : ( // gray if undefined
(bedlevel.z_values[x][y] < 0 ?
(uint16_t)round(0x1F * -bedlevel.z_values[x][y] / (!viewer_asymmetric_range ? range : v_min)) << 11 : // red if mesh point value is negative
(uint16_t)round(0x3F * bedlevel.z_values[x][y] / (!viewer_asymmetric_range ? range : v_max)) << 5) | // green if mesh point value is positive
_MIN(0x1F, (((uint8_t)abs(bedlevel.z_values[x][y]) / 10) * 4))), // + blue stepping for every mm
start_x_px, start_y_px, end_x_px, end_y_px
);
safe_delay(10);
LCD_SERIAL.flushTX();
// Draw value text on
if (viewer_print_value) {
int8_t offset_x, offset_y = cell_height_px / 2 - 6;
if (isnan(bedlevel.z_values[x][y])) { // undefined
DWIN_Draw_String(false, font6x12, Color_White, Color_Bg_Blue, start_x_px + cell_width_px / 2 - 5, start_y_px + offset_y, F("X"));
}
else { // has value
if (GRID_MAX_POINTS_X < 10)
sprintf_P(buf, PSTR("%s"), dtostrf(abs(bedlevel.z_values[x][y]), 1, 2, str_1));
else
sprintf_P(buf, PSTR("%02i"), (uint16_t)(abs(bedlevel.z_values[x][y] - (int16_t)bedlevel.z_values[x][y]) * 100));
offset_x = cell_width_px / 2 - 3 * (strlen(buf)) - 2;
if (!(GRID_MAX_POINTS_X < 10))
DWIN_Draw_String(false, font6x12, Color_White, Color_Bg_Blue, start_x_px - 2 + offset_x, start_y_px + offset_y /*+ square / 2 - 6*/, F("."));
DWIN_Draw_String(false, font6x12, Color_White, Color_Bg_Blue, start_x_px + 1 + offset_x, start_y_px + offset_y /*+ square / 2 - 6*/, buf);
}
safe_delay(10);
LCD_SERIAL.flushTX();
}
}
}
void Set_Mesh_Viewer_Status() { // TODO: draw gradient with values as a legend instead
float v_max = abs(get_max_value()), v_min = abs(get_min_value()), range = _MAX(v_min, v_max);
if (v_min > 3e+10F) v_min = 0.0000001;
if (v_max > 3e+10F) v_max = 0.0000001;
if (range > 3e+10F) range = 0.0000001;
char msg[46];
if (viewer_asymmetric_range) {
dtostrf(-v_min, 1, 3, str_1);
dtostrf( v_max, 1, 3, str_2);
}
else {
dtostrf(-range, 1, 3, str_1);
dtostrf( range, 1, 3, str_2);
}
sprintf_P(msg, PSTR("Red %s..0..%s Green"), str_1, str_2);
CrealityDWIN.Update_Status(msg);
drawing_mesh = false;
}
};
Mesh_Settings mesh_conf;
#endif // HAS_MESH
/* General Display Functions */
struct CrealityDWINClass::EEPROM_Settings CrealityDWINClass::eeprom_settings{0};
constexpr const char * const CrealityDWINClass::color_names[11];
constexpr const char * const CrealityDWINClass::preheat_modes[3];
// Clear a part of the screen
// 4=Entire screen
// 3=Title bar and Menu area (default)
// 2=Menu area
// 1=Title bar
void CrealityDWINClass::Clear_Screen(uint8_t e/*=3*/) {
if (e == 1 || e == 3 || e == 4) DWIN_Draw_Rectangle(1, GetColor(eeprom_settings.menu_top_bg, Color_Bg_Blue, false), 0, 0, DWIN_WIDTH, TITLE_HEIGHT); // Clear Title Bar
if (e == 2 || e == 3) DWIN_Draw_Rectangle(1, Color_Bg_Black, 0, 31, DWIN_WIDTH, STATUS_Y); // Clear Menu Area
if (e == 4) DWIN_Draw_Rectangle(1, Color_Bg_Black, 0, 31, DWIN_WIDTH, DWIN_HEIGHT); // Clear Popup Area
}
void CrealityDWINClass::Draw_Float(float value, uint8_t row, bool selected/*=false*/, uint8_t minunit/*=10*/) {
const uint8_t digits = (uint8_t)floor(log10(abs(value))) + log10(minunit) + (minunit > 1);
const uint16_t bColor = (selected) ? Select_Color : Color_Bg_Black;
const uint16_t xpos = 240 - (digits * 8);
DWIN_Draw_Rectangle(1, Color_Bg_Black, 194, MBASE(row), 234 - (digits * 8), MBASE(row) + 16);
if (isnan(value))
DWIN_Draw_String(true, DWIN_FONT_MENU, Color_White, bColor, xpos - 8, MBASE(row), F(" NaN"));
else {
DWIN_Draw_FloatValue(true, true, 0, DWIN_FONT_MENU, Color_White, bColor, digits - log10(minunit) + 1, log10(minunit), xpos, MBASE(row), (value < 0 ? -value : value));
DWIN_Draw_String(true, DWIN_FONT_MENU, Color_White, bColor, xpos - 8, MBASE(row), value < 0 ? F("-") : F(" "));
}
}
void CrealityDWINClass::Draw_Option(uint8_t value, const char * const * options, uint8_t row, bool selected/*=false*/, bool color/*=false*/) {
uint16_t bColor = (selected) ? Select_Color : Color_Bg_Black,
tColor = (color) ? GetColor(value, Color_White, false) : Color_White;
DWIN_Draw_Rectangle(1, bColor, 202, MBASE(row) + 14, 258, MBASE(row) - 2);
DWIN_Draw_String(false, DWIN_FONT_MENU, tColor, bColor, 202, MBASE(row) - 1, options[value]);
}
uint16_t CrealityDWINClass::GetColor(uint8_t color, uint16_t original, bool light/*=false*/) {
switch (color) {
case Default:
return original;
break;
case White:
return (light) ? Color_Light_White : Color_White;
break;
case Green:
return (light) ? Color_Light_Green : Color_Green;
break;
case Cyan:
return (light) ? Color_Light_Cyan : Color_Cyan;
break;
case Blue:
return (light) ? Color_Light_Blue : Color_Blue;
break;
case Magenta:
return (light) ? Color_Light_Magenta : Color_Magenta;
break;
case Red:
return (light) ? Color_Light_Red : Color_Red;
break;
case Orange:
return (light) ? Color_Light_Orange : Color_Orange;
break;
case Yellow:
return (light) ? Color_Light_Yellow : Color_Yellow;
break;
case Brown:
return (light) ? Color_Light_Brown : Color_Brown;
break;
case Black:
return Color_Black;
break;
}
return Color_White;
}
void CrealityDWINClass::Draw_Title(const char * ctitle) {
DWIN_Draw_String(false, DWIN_FONT_HEAD, GetColor(eeprom_settings.menu_top_txt, Color_White, false), Color_Bg_Blue, (DWIN_WIDTH - strlen(ctitle) * STAT_CHR_W) / 2, 5, ctitle);
}
void CrealityDWINClass::Draw_Title(FSTR_P const ftitle) {
DWIN_Draw_String(false, DWIN_FONT_HEAD, GetColor(eeprom_settings.menu_top_txt, Color_White, false), Color_Bg_Blue, (DWIN_WIDTH - strlen_P(FTOP(ftitle)) * STAT_CHR_W) / 2, 5, ftitle);
}
void _Decorate_Menu_Item(uint8_t row, uint8_t icon, bool more) {
if (icon) DWIN_ICON_Show(ICON, icon, 26, MBASE(row) - 3); //Draw Menu Icon
if (more) DWIN_ICON_Show(ICON, ICON_More, 226, MBASE(row) - 3); // Draw More Arrow
DWIN_Draw_Line(CrealityDWIN.GetColor(CrealityDWIN.eeprom_settings.menu_split_line, Line_Color, true), 16, MBASE(row) + 33, 256, MBASE(row) + 33); // Draw Menu Line
}
void CrealityDWINClass::Draw_Menu_Item(uint8_t row, uint8_t icon/*=0*/, const char * label1, const char * label2, bool more/*=false*/, bool centered/*=false*/) {
const uint8_t label_offset_y = (label1 || label2) ? MENU_CHR_H * 3 / 5 : 0,
label1_offset_x = !centered ? LBLX : LBLX * 4/5 + _MAX(LBLX * 1U/5, (DWIN_WIDTH - LBLX - (label1 ? strlen(label1) : 0) * MENU_CHR_W) / 2),
label2_offset_x = !centered ? LBLX : LBLX * 4/5 + _MAX(LBLX * 1U/5, (DWIN_WIDTH - LBLX - (label2 ? strlen(label2) : 0) * MENU_CHR_W) / 2);
if (label1) DWIN_Draw_String(false, DWIN_FONT_MENU, Color_White, Color_Bg_Black, label1_offset_x, MBASE(row) - 1 - label_offset_y, label1); // Draw Label
if (label2) DWIN_Draw_String(false, DWIN_FONT_MENU, Color_White, Color_Bg_Black, label2_offset_x, MBASE(row) - 1 + label_offset_y, label2); // Draw Label
_Decorate_Menu_Item(row, icon, more);
}
void CrealityDWINClass::Draw_Menu_Item(uint8_t row, uint8_t icon/*=0*/, FSTR_P const flabel1, FSTR_P const flabel2, bool more/*=false*/, bool centered/*=false*/) {
const uint8_t label_offset_y = (flabel1 || flabel2) ? MENU_CHR_H * 3 / 5 : 0,
label1_offset_x = !centered ? LBLX : LBLX * 4/5 + _MAX(LBLX * 1U/5, (DWIN_WIDTH - LBLX - (flabel1 ? strlen_P(FTOP(flabel1)) : 0) * MENU_CHR_W) / 2),
label2_offset_x = !centered ? LBLX : LBLX * 4/5 + _MAX(LBLX * 1U/5, (DWIN_WIDTH - LBLX - (flabel2 ? strlen_P(FTOP(flabel2)) : 0) * MENU_CHR_W) / 2);
if (flabel1) DWIN_Draw_String(false, DWIN_FONT_MENU, Color_White, Color_Bg_Black, label1_offset_x, MBASE(row) - 1 - label_offset_y, flabel1); // Draw Label
if (flabel2) DWIN_Draw_String(false, DWIN_FONT_MENU, Color_White, Color_Bg_Black, label2_offset_x, MBASE(row) - 1 + label_offset_y, flabel2); // Draw Label
_Decorate_Menu_Item(row, icon, more);
}
void CrealityDWINClass::Draw_Checkbox(uint8_t row, bool value) {
#if ENABLED(DWIN_CREALITY_LCD_CUSTOM_ICONS) // Draw appropriate checkbox icon
DWIN_ICON_Show(ICON, (value ? ICON_Checkbox_T : ICON_Checkbox_F), 226, MBASE(row) - 3);
#else // Draw a basic checkbox using rectangles and lines
DWIN_Draw_Rectangle(1, Color_Bg_Black, 226, MBASE(row) - 3, 226 + 20, MBASE(row) - 3 + 20);
DWIN_Draw_Rectangle(0, Color_White, 226, MBASE(row) - 3, 226 + 20, MBASE(row) - 3 + 20);
if (value) {
DWIN_Draw_Line(Check_Color, 227, MBASE(row) - 3 + 11, 226 + 8, MBASE(row) - 3 + 17);
DWIN_Draw_Line(Check_Color, 227 + 8, MBASE(row) - 3 + 17, 226 + 19, MBASE(row) - 3 + 1);
DWIN_Draw_Line(Check_Color, 227, MBASE(row) - 3 + 12, 226 + 8, MBASE(row) - 3 + 18);
DWIN_Draw_Line(Check_Color, 227 + 8, MBASE(row) - 3 + 18, 226 + 19, MBASE(row) - 3 + 2);
DWIN_Draw_Line(Check_Color, 227, MBASE(row) - 3 + 13, 226 + 8, MBASE(row) - 3 + 19);
DWIN_Draw_Line(Check_Color, 227 + 8, MBASE(row) - 3 + 19, 226 + 19, MBASE(row) - 3 + 3);
}
#endif
}
void CrealityDWINClass::Draw_Menu(uint8_t menu, uint8_t select/*=0*/, uint8_t scroll/*=0*/) {
if (active_menu != menu) {
last_menu = active_menu;
if (process == Menu) last_selection = selection;
}
selection = _MIN(select, Get_Menu_Size(menu));
scrollpos = scroll;
if (selection - scrollpos > MROWS)
scrollpos = selection - MROWS;
process = Menu;
active_menu = menu;
Clear_Screen();
Draw_Title(Get_Menu_Title(menu));
LOOP_L_N(i, TROWS) Menu_Item_Handler(menu, i + scrollpos);
DWIN_Draw_Rectangle(1, GetColor(eeprom_settings.cursor_color, Rectangle_Color), 0, MBASE(selection - scrollpos) - 18, 14, MBASE(selection - scrollpos) + 33);
}
void CrealityDWINClass::Redraw_Menu(bool lastprocess/*=true*/, bool lastselection/*=false*/, bool lastmenu/*=false*/) {
switch ((lastprocess) ? last_process : process) {
case Menu:
Draw_Menu((lastmenu) ? last_menu : active_menu, (lastselection) ? last_selection : selection, (lastmenu) ? 0 : scrollpos);
break;
case Main: Draw_Main_Menu((lastselection) ? last_selection : selection); break;
case Print: Draw_Print_Screen(); break;
case File: Draw_SD_List(); break;
default: break;
}
}
void CrealityDWINClass::Redraw_Screen() {
Redraw_Menu(false);
Draw_Status_Area(true);
Update_Status_Bar(true);
}
/* Primary Menus and Screen Elements */
void CrealityDWINClass::Main_Menu_Icons() {
if (selection == 0) {
DWIN_ICON_Show(ICON, ICON_Print_1, 17, 130);
DWIN_Draw_Rectangle(0, GetColor(eeprom_settings.highlight_box, Color_White), 17, 130, 126, 229);
DWIN_Draw_String(false, DWIN_FONT_MENU, Color_White, Color_Bg_Blue, 52, 200, F("Print"));
}
else {
DWIN_ICON_Show(ICON, ICON_Print_0, 17, 130);
DWIN_Draw_String(false, DWIN_FONT_MENU, Color_White, Color_Bg_Blue, 52, 200, F("Print"));
}
if (selection == 1) {
DWIN_ICON_Show(ICON, ICON_Prepare_1, 145, 130);
DWIN_Draw_Rectangle(0, GetColor(eeprom_settings.highlight_box, Color_White), 145, 130, 254, 229);
DWIN_Draw_String(false, DWIN_FONT_MENU, Color_White, Color_Bg_Blue, 170, 200, F("Prepare"));
}
else {
DWIN_ICON_Show(ICON, ICON_Prepare_0, 145, 130);
DWIN_Draw_String(false, DWIN_FONT_MENU, Color_White, Color_Bg_Blue, 170, 200, F("Prepare"));
}
if (selection == 2) {
DWIN_ICON_Show(ICON, ICON_Control_1, 17, 246);
DWIN_Draw_Rectangle(0, GetColor(eeprom_settings.highlight_box, Color_White), 17, 246, 126, 345);
DWIN_Draw_String(false, DWIN_FONT_MENU, Color_White, Color_Bg_Blue, 43, 317, F("Control"));
}
else {
DWIN_ICON_Show(ICON, ICON_Control_0, 17, 246);
DWIN_Draw_String(false, DWIN_FONT_MENU, Color_White, Color_Bg_Blue, 43, 317, F("Control"));
}
#if HAS_ABL_OR_UBL
if (selection == 3) {
DWIN_ICON_Show(ICON, ICON_Leveling_1, 145, 246);
DWIN_Draw_Rectangle(0, GetColor(eeprom_settings.highlight_box, Color_White), 145, 246, 254, 345);
DWIN_Draw_String(false, DWIN_FONT_MENU, Color_White, Color_Bg_Blue, 179, 317, F("Level"));
}
else {
DWIN_ICON_Show(ICON, ICON_Leveling_0, 145, 246);
DWIN_Draw_String(false, DWIN_FONT_MENU, Color_White, Color_Bg_Blue, 179, 317, F("Level"));
}
#else
if (selection == 3) {
DWIN_ICON_Show(ICON, ICON_Info_1, 145, 246);
DWIN_Draw_Rectangle(0, GetColor(eeprom_settings.highlight_box, Color_White), 145, 246, 254, 345);
DWIN_Draw_String(false, DWIN_FONT_MENU, Color_White, Color_Bg_Blue, 181, 317, F("Info"));
}
else {
DWIN_ICON_Show(ICON, ICON_Info_0, 145, 246);
DWIN_Draw_String(false, DWIN_FONT_MENU, Color_White, Color_Bg_Blue, 181, 317, F("Info"));
}
#endif
}
void CrealityDWINClass::Draw_Main_Menu(uint8_t select/*=0*/) {
process = Main;
active_menu = MainMenu;
selection = select;
Clear_Screen();
Draw_Title(Get_Menu_Title(MainMenu));
SERIAL_ECHOPGM("\nDWIN handshake ");
DWIN_ICON_Show(ICON, ICON_LOGO, 71, 72);
Main_Menu_Icons();
}
void CrealityDWINClass::Print_Screen_Icons() {
if (selection == 0) {
DWIN_ICON_Show(ICON, ICON_Setup_1, 8, 252);
DWIN_Draw_Rectangle(0, GetColor(eeprom_settings.highlight_box, Color_White), 8, 252, 87, 351);
DWIN_Draw_String(false, DWIN_FONT_MENU, Color_White, Color_Bg_Blue, 30, 322, F("Tune"));
}
else {
DWIN_ICON_Show(ICON, ICON_Setup_0, 8, 252);
DWIN_Draw_String(false, DWIN_FONT_MENU, Color_White, Color_Bg_Blue, 30, 322, F("Tune"));
}
if (selection == 2) {
DWIN_ICON_Show(ICON, ICON_Stop_1, 184, 252);
DWIN_Draw_Rectangle(0, GetColor(eeprom_settings.highlight_box, Color_White), 184, 252, 263, 351);
DWIN_Draw_String(false, DWIN_FONT_MENU, Color_White, Color_Bg_Blue, 205, 322, F("Stop"));
}
else {
DWIN_ICON_Show(ICON, ICON_Stop_0, 184, 252);
DWIN_Draw_String(false, DWIN_FONT_MENU, Color_White, Color_Bg_Blue, 205, 322, F("Stop"));
}
if (paused) {
if (selection == 1) {
DWIN_ICON_Show(ICON, ICON_Continue_1, 96, 252);
DWIN_Draw_Rectangle(0, GetColor(eeprom_settings.highlight_box, Color_White), 96, 252, 175, 351);
DWIN_Draw_String(false, DWIN_FONT_MENU, Color_White, Color_Bg_Blue, 114, 322, F("Print"));
}
else {
DWIN_ICON_Show(ICON, ICON_Continue_0, 96, 252);
DWIN_Draw_String(false, DWIN_FONT_MENU, Color_White, Color_Bg_Blue, 114, 322, F("Print"));
}
}
else {
if (selection == 1) {
DWIN_ICON_Show(ICON, ICON_Pause_1, 96, 252);
DWIN_Draw_Rectangle(0, GetColor(eeprom_settings.highlight_box, Color_White), 96, 252, 175, 351);
DWIN_Draw_String(false, DWIN_FONT_MENU, Color_White, Color_Bg_Blue, 114, 322, F("Pause"));
}
else {
DWIN_ICON_Show(ICON, ICON_Pause_0, 96, 252);
DWIN_Draw_String(false, DWIN_FONT_MENU, Color_White, Color_Bg_Blue, 114, 322, F("Pause"));
}
}
}
void CrealityDWINClass::Draw_Print_Screen() {
process = Print;
selection = 0;
Clear_Screen();
DWIN_Draw_Rectangle(1, Color_Bg_Black, 8, 352, DWIN_WIDTH - 8, 376);
Draw_Title("Printing...");
Print_Screen_Icons();
DWIN_ICON_Show(ICON, ICON_PrintTime, 14, 171);
DWIN_ICON_Show(ICON, ICON_RemainTime, 147, 169);
DWIN_Draw_String(false, DWIN_FONT_MENU, Color_White, Color_Bg_Black, 41, 163, F("Elapsed"));
DWIN_Draw_String(false, DWIN_FONT_MENU, Color_White, Color_Bg_Black, 176, 163, F("Remaining"));
Update_Status_Bar(true);
Draw_Print_ProgressBar();
Draw_Print_ProgressElapsed();
TERN_(USE_M73_REMAINING_TIME, Draw_Print_ProgressRemain());
Draw_Print_Filename(true);
}
void CrealityDWINClass::Draw_Print_Filename(const bool reset/*=false*/) {
typedef TextScroller<30> Scroller;
static Scroller scroller;
if (reset) scroller.reset();
if (process == Print) {
Scroller::Buffer buf;
size_t outlen = 0;
const char* outstr = scroller.scroll(outlen, buf, filename);
DWIN_Draw_Rectangle(1, Color_Bg_Black, 8, 50, DWIN_WIDTH - 8, 80);
const int8_t npos = (DWIN_WIDTH - outlen * MENU_CHR_W) / 2;
DWIN_Draw_String(false, DWIN_FONT_MENU, Color_White, Color_Bg_Black, npos, 60, outstr);
}
}
void CrealityDWINClass::Draw_Print_ProgressBar() {
uint8_t printpercent = sdprint ? card.percentDone() : (ui._get_progress() / 100);
DWIN_ICON_Show(ICON, ICON_Bar, 15, 93);
DWIN_Draw_Rectangle(1, BarFill_Color, 16 + printpercent * 240 / 100, 93, 256, 113);
DWIN_Draw_IntValue(true, true, 0, DWIN_FONT_MENU, GetColor(eeprom_settings.progress_percent, Percent_Color), Color_Bg_Black, 3, 109, 133, printpercent);
DWIN_Draw_String(false, DWIN_FONT_MENU, GetColor(eeprom_settings.progress_percent, Percent_Color), Color_Bg_Black, 133, 133, F("%"));
}
#if ENABLED(USE_M73_REMAINING_TIME)
void CrealityDWINClass::Draw_Print_ProgressRemain() {
uint16_t remainingtime = ui.get_remaining_time();
DWIN_Draw_IntValue(true, true, 1, DWIN_FONT_MENU, GetColor(eeprom_settings.progress_time, Color_White), Color_Bg_Black, 2, 176, 187, remainingtime / 3600);
DWIN_Draw_IntValue(true, true, 1, DWIN_FONT_MENU, GetColor(eeprom_settings.progress_time, Color_White), Color_Bg_Black, 2, 200, 187, (remainingtime % 3600) / 60);
if (eeprom_settings.time_format_textual) {
DWIN_Draw_String(false, DWIN_FONT_MENU, GetColor(eeprom_settings.progress_time, Color_White), Color_Bg_Black, 192, 187, F("h"));
DWIN_Draw_String(false, DWIN_FONT_MENU, GetColor(eeprom_settings.progress_time, Color_White), Color_Bg_Black, 216, 187, F("m"));
}
else
DWIN_Draw_String(false, DWIN_FONT_MENU, GetColor(eeprom_settings.progress_time, Color_White), Color_Bg_Black, 192, 187, F(":"));
}
#endif
void CrealityDWINClass::Draw_Print_ProgressElapsed() {
duration_t elapsed = print_job_timer.duration();
DWIN_Draw_IntValue(true, true, 1, DWIN_FONT_MENU, GetColor(eeprom_settings.progress_time, Color_White), Color_Bg_Black, 2, 42, 187, elapsed.value / 3600);
DWIN_Draw_IntValue(true, true, 1, DWIN_FONT_MENU, GetColor(eeprom_settings.progress_time, Color_White), Color_Bg_Black, 2, 66, 187, (elapsed.value % 3600) / 60);
if (eeprom_settings.time_format_textual) {
DWIN_Draw_String(false, DWIN_FONT_MENU, GetColor(eeprom_settings.progress_time, Color_White), Color_Bg_Black, 58, 187, F("h"));
DWIN_Draw_String(false, DWIN_FONT_MENU, GetColor(eeprom_settings.progress_time, Color_White), Color_Bg_Black, 82, 187, F("m"));
}
else
DWIN_Draw_String(false, DWIN_FONT_MENU, GetColor(eeprom_settings.progress_time, Color_White), Color_Bg_Black, 58, 187, F(":"));
}
void CrealityDWINClass::Draw_Print_confirm() {
Draw_Print_Screen();
process = Confirm;
popup = Complete;
DWIN_Draw_Rectangle(1, Color_Bg_Black, 8, 252, 263, 351);
DWIN_ICON_Show(ICON, ICON_Confirm_E, 87, 283);
DWIN_Draw_Rectangle(0, GetColor(eeprom_settings.highlight_box, Color_White), 86, 282, 187, 321);
DWIN_Draw_Rectangle(0, GetColor(eeprom_settings.highlight_box, Color_White), 85, 281, 188, 322);
}
void CrealityDWINClass::Draw_SD_Item(uint8_t item, uint8_t row) {
if (item == 0)
Draw_Menu_Item(0, ICON_Back, card.flag.workDirIsRoot ? F("Back") : F(".."));
else {
card.getfilename_sorted(SD_ORDER(item - 1, card.get_num_Files()));
char * const filename = card.longest_filename();
size_t max = MENU_CHAR_LIMIT;
size_t pos = strlen(filename), len = pos;
if (!card.flag.filenameIsDir)
while (pos && filename[pos] != '.') pos--;
len = pos;
if (len > max) len = max;
char name[len + 1];
LOOP_L_N(i, len) name[i] = filename[i];
if (pos > max)
LOOP_S_L_N(i, len - 3, len) name[i] = '.';
name[len] = '\0';
Draw_Menu_Item(row, card.flag.filenameIsDir ? ICON_More : ICON_File, name);
}
}
void CrealityDWINClass::Draw_SD_List(bool removed/*=false*/) {
Clear_Screen();
Draw_Title("Select File");
selection = 0;
scrollpos = 0;
process = File;
if (card.isMounted() && !removed) {
LOOP_L_N(i, _MIN(card.get_num_Files() + 1, TROWS))
Draw_SD_Item(i, i);
}
else {
Draw_Menu_Item(0, ICON_Back, F("Back"));
DWIN_Draw_Rectangle(1, Color_Bg_Red, 10, MBASE(3) - 10, DWIN_WIDTH - 10, MBASE(4));
DWIN_Draw_String(false, font16x32, Color_Yellow, Color_Bg_Red, ((DWIN_WIDTH) - 8 * 16) / 2, MBASE(3), F("No Media"));
}
DWIN_Draw_Rectangle(1, GetColor(eeprom_settings.cursor_color, Rectangle_Color), 0, MBASE(0) - 18, 14, MBASE(0) + 33);
}
void CrealityDWINClass::Draw_Status_Area(bool icons/*=false*/) {
if (icons) DWIN_Draw_Rectangle(1, Color_Bg_Black, 0, STATUS_Y, DWIN_WIDTH, DWIN_HEIGHT - 1);
#if HAS_HOTEND
static float hotend = -1;
static int16_t hotendtarget = -1, flow = -1;
if (icons) {
hotend = -1;
hotendtarget = -1;
DWIN_ICON_Show(ICON, ICON_HotendTemp, 10, 383);
DWIN_Draw_String(false, DWIN_FONT_STAT, GetColor(eeprom_settings.status_area_text, Color_White), Color_Bg_Black, 25 + 3 * STAT_CHR_W + 5, 384, F("/"));
}
if (thermalManager.temp_hotend[0].celsius != hotend) {
hotend = thermalManager.temp_hotend[0].celsius;
DWIN_Draw_IntValue(true, true, 0, DWIN_FONT_STAT, GetColor(eeprom_settings.status_area_text, Color_White), Color_Bg_Black, 3, 28, 384, thermalManager.temp_hotend[0].celsius);
DWIN_Draw_DegreeSymbol(GetColor(eeprom_settings.status_area_text, Color_White), 25 + 3 * STAT_CHR_W + 5, 386);
}
if (thermalManager.temp_hotend[0].target != hotendtarget) {
hotendtarget = thermalManager.temp_hotend[0].target;
DWIN_Draw_IntValue(true, true, 0, DWIN_FONT_STAT, GetColor(eeprom_settings.status_area_text, Color_White), Color_Bg_Black, 3, 25 + 4 * STAT_CHR_W + 6, 384, thermalManager.temp_hotend[0].target);
DWIN_Draw_DegreeSymbol(GetColor(eeprom_settings.status_area_text, Color_White), 25 + 4 * STAT_CHR_W + 39, 386);
}
if (icons) {
flow = -1;
DWIN_ICON_Show(ICON, ICON_StepE, 112, 417);
DWIN_Draw_String(false, DWIN_FONT_STAT, GetColor(eeprom_settings.status_area_text, Color_White), Color_Bg_Black, 116 + 5 * STAT_CHR_W + 2, 417, F("%"));
}
if (planner.flow_percentage[0] != flow) {
flow = planner.flow_percentage[0];
DWIN_Draw_IntValue(true, true, 0, DWIN_FONT_STAT, GetColor(eeprom_settings.status_area_text, Color_White), Color_Bg_Black, 3, 116 + 2 * STAT_CHR_W, 417, planner.flow_percentage[0]);
}
#endif
#if HAS_HEATED_BED
static float bed = -1;
static int16_t bedtarget = -1;
if (icons) {
bed = -1;
bedtarget = -1;
DWIN_ICON_Show(ICON, ICON_BedTemp, 10, 416);
DWIN_Draw_String(false, DWIN_FONT_STAT, GetColor(eeprom_settings.status_area_text, Color_White), Color_Bg_Black, 25 + 3 * STAT_CHR_W + 5, 417, F("/"));
}
if (thermalManager.temp_bed.celsius != bed) {
bed = thermalManager.temp_bed.celsius;
DWIN_Draw_IntValue(true, true, 0, DWIN_FONT_STAT, GetColor(eeprom_settings.status_area_text, Color_White), Color_Bg_Black, 3, 28, 417, thermalManager.temp_bed.celsius);
DWIN_Draw_DegreeSymbol(GetColor(eeprom_settings.status_area_text, Color_White), 25 + 3 * STAT_CHR_W + 5, 419);
}
if (thermalManager.temp_bed.target != bedtarget) {
bedtarget = thermalManager.temp_bed.target;
DWIN_Draw_IntValue(true, true, 0, DWIN_FONT_STAT, GetColor(eeprom_settings.status_area_text, Color_White), Color_Bg_Black, 3, 25 + 4 * STAT_CHR_W + 6, 417, thermalManager.temp_bed.target);
DWIN_Draw_DegreeSymbol(GetColor(eeprom_settings.status_area_text, Color_White), 25 + 4 * STAT_CHR_W + 39, 419);
}
#endif
#if HAS_FAN
static uint8_t fan = -1;
if (icons) {
fan = -1;
DWIN_ICON_Show(ICON, ICON_FanSpeed, 187, 383);
}
if (thermalManager.fan_speed[0] != fan) {
fan = thermalManager.fan_speed[0];
DWIN_Draw_IntValue(true, true, 0, DWIN_FONT_STAT, GetColor(eeprom_settings.status_area_text, Color_White), Color_Bg_Black, 3, 195 + 2 * STAT_CHR_W, 384, thermalManager.fan_speed[0]);
}
#endif
#if HAS_ZOFFSET_ITEM
static float offset = -1;
if (icons) {
offset = -1;
DWIN_ICON_Show(ICON, ICON_Zoffset, 187, 416);
}
if (zoffsetvalue != offset) {
offset = zoffsetvalue;
DWIN_Draw_FloatValue(true, true, 0, DWIN_FONT_STAT, GetColor(eeprom_settings.status_area_text, Color_White), Color_Bg_Black, 2, 2, 207, 417, (zoffsetvalue < 0 ? -zoffsetvalue : zoffsetvalue));
DWIN_Draw_String(true, DWIN_FONT_MENU, GetColor(eeprom_settings.status_area_text, Color_White), Color_Bg_Black, 205, 419, zoffsetvalue < 0 ? F("-") : F(" "));
}
#endif
static int16_t feedrate = -1;
if (icons) {
feedrate = -1;
DWIN_ICON_Show(ICON, ICON_Speed, 113, 383);
DWIN_Draw_String(false, DWIN_FONT_STAT, GetColor(eeprom_settings.status_area_text, Color_White), Color_Bg_Black, 116 + 5 * STAT_CHR_W + 2, 384, F("%"));
}
if (feedrate_percentage != feedrate) {
feedrate = feedrate_percentage;
DWIN_Draw_IntValue(true, true, 0, DWIN_FONT_STAT, GetColor(eeprom_settings.status_area_text, Color_White), Color_Bg_Black, 3, 116 + 2 * STAT_CHR_W, 384, feedrate_percentage);
}
static float x = -1, y = -1, z = -1;
static bool update_x = false, update_y = false, update_z = false;
update_x = (current_position.x != x || axis_should_home(X_AXIS) || update_x);
update_y = (current_position.y != y || axis_should_home(Y_AXIS) || update_y);
update_z = (current_position.z != z || axis_should_home(Z_AXIS) || update_z);
if (icons) {
x = y = z = -1;
DWIN_Draw_Line(GetColor(eeprom_settings.coordinates_split_line, Line_Color, true), 16, 450, 256, 450);
DWIN_ICON_Show(ICON, ICON_MaxSpeedX, 10, 456);
DWIN_ICON_Show(ICON, ICON_MaxSpeedY, 95, 456);
DWIN_ICON_Show(ICON, ICON_MaxSpeedZ, 180, 456);
}
if (update_x) {
x = current_position.x;
if ((update_x = axis_should_home(X_AXIS) && ui.get_blink()))
DWIN_Draw_String(true, DWIN_FONT_MENU, GetColor(eeprom_settings.coordinates_text, Color_White), Color_Bg_Black, 35, 459, F(" -?- "));
else
DWIN_Draw_FloatValue(true, true, 0, DWIN_FONT_MENU, GetColor(eeprom_settings.coordinates_text, Color_White), Color_Bg_Black, 3, 1, 35, 459, current_position.x);
}
if (update_y) {
y = current_position.y;
if ((update_y = axis_should_home(Y_AXIS) && ui.get_blink()))
DWIN_Draw_String(true, DWIN_FONT_MENU, GetColor(eeprom_settings.coordinates_text, Color_White), Color_Bg_Black, 120, 459, F(" -?- "));
else
DWIN_Draw_FloatValue(true, true, 0, DWIN_FONT_MENU, GetColor(eeprom_settings.coordinates_text, Color_White), Color_Bg_Black, 3, 1, 120, 459, current_position.y);
}
if (update_z) {
z = current_position.z;
if ((update_z = axis_should_home(Z_AXIS) && ui.get_blink()))
DWIN_Draw_String(true, DWIN_FONT_MENU, GetColor(eeprom_settings.coordinates_text, Color_White), Color_Bg_Black, 205, 459, F(" -?- "));
else
DWIN_Draw_FloatValue(true, true, 0, DWIN_FONT_MENU, GetColor(eeprom_settings.coordinates_text, Color_White), Color_Bg_Black, 3, 2, 205, 459, (current_position.z>=0) ? current_position.z : 0);
}
DWIN_UpdateLCD();
}
void CrealityDWINClass::Draw_Popup(FSTR_P const line1, FSTR_P const line2, FSTR_P const line3, uint8_t mode, uint8_t icon/*=0*/) {
if (process != Confirm && process != Popup && process != Wait) last_process = process;
if ((process == Menu || process == Wait) && mode == Popup) last_selection = selection;
process = mode;
Clear_Screen();
DWIN_Draw_Rectangle(0, Color_White, 13, 59, 259, 351);
DWIN_Draw_Rectangle(1, Color_Bg_Window, 14, 60, 258, 350);
const uint8_t ypos = (mode == Popup || mode == Confirm) ? 150 : 230;
if (icon > 0) DWIN_ICON_Show(ICON, icon, 101, 105);
DWIN_Draw_String(true, DWIN_FONT_MENU, Popup_Text_Color, Color_Bg_Window, (272 - 8 * strlen_P(FTOP(line1))) / 2, ypos, line1);
DWIN_Draw_String(true, DWIN_FONT_MENU, Popup_Text_Color, Color_Bg_Window, (272 - 8 * strlen_P(FTOP(line2))) / 2, ypos + 30, line2);
DWIN_Draw_String(true, DWIN_FONT_MENU, Popup_Text_Color, Color_Bg_Window, (272 - 8 * strlen_P(FTOP(line3))) / 2, ypos + 60, line3);
if (mode == Popup) {
selection = 0;
DWIN_Draw_Rectangle(1, Confirm_Color, 26, 280, 125, 317);
DWIN_Draw_Rectangle(1, Cancel_Color, 146, 280, 245, 317);
DWIN_Draw_String(false, DWIN_FONT_STAT, Color_White, Color_Bg_Window, 39, 290, F("Confirm"));
DWIN_Draw_String(false, DWIN_FONT_STAT, Color_White, Color_Bg_Window, 165, 290, F("Cancel"));
Popup_Select();
}
else if (mode == Confirm) {
DWIN_Draw_Rectangle(1, Confirm_Color, 87, 280, 186, 317);
DWIN_Draw_String(false, DWIN_FONT_STAT, Color_White, Color_Bg_Window, 96, 290, F("Continue"));
}
}
void MarlinUI::kill_screen(FSTR_P const error, FSTR_P const) {
CrealityDWIN.Draw_Popup(F("Printer Kill Reason:"), error, F("Restart Required"), Wait, ICON_BLTouch);
}
void CrealityDWINClass::Popup_Select() {
const uint16_t c1 = (selection == 0) ? GetColor(eeprom_settings.highlight_box, Color_White) : Color_Bg_Window,
c2 = (selection == 0) ? Color_Bg_Window : GetColor(eeprom_settings.highlight_box, Color_White);
DWIN_Draw_Rectangle(0, c1, 25, 279, 126, 318);
DWIN_Draw_Rectangle(0, c1, 24, 278, 127, 319);
DWIN_Draw_Rectangle(0, c2, 145, 279, 246, 318);
DWIN_Draw_Rectangle(0, c2, 144, 278, 247, 319);
}
void CrealityDWINClass::Update_Status_Bar(bool refresh/*=false*/) {
typedef TextScroller<30> Scroller;
static bool new_msg;
static Scroller scroller;
static char lastmsg[64];
if (strcmp(lastmsg, statusmsg) != 0 || refresh) {
strcpy(lastmsg, statusmsg);
scroller.reset();
new_msg = true;
}
Scroller::Buffer buf;
size_t len = 0;
const char* dispmsg = scroller.scroll(len, buf, statusmsg, &new_msg);
if (new_msg) {
new_msg = false;
if (process == Print) {
DWIN_Draw_Rectangle(1, Color_Grey, 8, 214, DWIN_WIDTH - 8, 238);
const int8_t npos = (DWIN_WIDTH - len * MENU_CHR_W) / 2;
DWIN_Draw_String(false, DWIN_FONT_MENU, GetColor(eeprom_settings.status_bar_text, Color_White), Color_Bg_Black, npos, 219, dispmsg);
}
else {
DWIN_Draw_Rectangle(1, Color_Bg_Black, 8, 352, DWIN_WIDTH - 8, 376);
const int8_t npos = (DWIN_WIDTH - len * MENU_CHR_W) / 2;
DWIN_Draw_String(false, DWIN_FONT_MENU, GetColor(eeprom_settings.status_bar_text, Color_White), Color_Bg_Black, npos, 357, dispmsg);
}
}
}
/* Menu Item Config */
void CrealityDWINClass::Menu_Item_Handler(uint8_t menu, uint8_t item, bool draw/*=true*/) {
const uint8_t row = item - scrollpos;
#if HAS_LEVELING
static bool level_state;
#endif
#if HAS_PREHEAT
#define PREHEAT_BACK 0
#define PREHEAT_SUBMENU_HOTEND (PREHEAT_BACK + ENABLED(HAS_HOTEND))
#define PREHEAT_SUBMENU_BED (PREHEAT_SUBMENU_HOTEND + ENABLED(HAS_HEATED_BED))
#define PREHEAT_SUBMENU_FAN (PREHEAT_SUBMENU_BED + ENABLED(HAS_FAN))
#define PREHEAT_SUBMENU_TOTAL PREHEAT_SUBMENU_FAN
auto preheat_submenu = [&](const int index, const uint8_t item, const uint8_t sel) {
switch (item) {
case PREHEAT_BACK:
if (draw)
Draw_Menu_Item(row, ICON_Back, F("Back"));
else
Draw_Menu(TempMenu, sel);
break;
#if HAS_HOTEND
case PREHEAT_SUBMENU_HOTEND:
if (draw) {
Draw_Menu_Item(row, ICON_SetEndTemp, F("Hotend"));
Draw_Float(ui.material_preset[index].hotend_temp, row, false, 1);
}
else
Modify_Value(ui.material_preset[index].hotend_temp, MIN_E_TEMP, MAX_E_TEMP, 1);
break;
#endif
#if HAS_HEATED_BED
case PREHEAT_SUBMENU_BED:
if (draw) {
Draw_Menu_Item(row, ICON_SetBedTemp, F("Bed"));
Draw_Float(ui.material_preset[index].bed_temp, row, false, 1);
}
else
Modify_Value(ui.material_preset[index].bed_temp, MIN_BED_TEMP, MAX_BED_TEMP, 1);
break;
#endif
#if HAS_FAN
case PREHEAT_SUBMENU_FAN:
if (draw) {
Draw_Menu_Item(row, ICON_FanSpeed, F("Fan"));
Draw_Float(ui.material_preset[index].fan_speed, row, false, 1);
}
else
Modify_Value(ui.material_preset[index].fan_speed, MIN_FAN_SPEED, MAX_FAN_SPEED, 1);
break;
#endif
}
};
#endif
switch (menu) {
case Prepare:
#define PREPARE_BACK 0
#define PREPARE_MOVE (PREPARE_BACK + 1)
#define PREPARE_DISABLE (PREPARE_MOVE + 1)
#define PREPARE_HOME (PREPARE_DISABLE + 1)
#define PREPARE_MANUALLEVEL (PREPARE_HOME + 1)
#define PREPARE_ZOFFSET (PREPARE_MANUALLEVEL + ENABLED(HAS_ZOFFSET_ITEM))
#define PREPARE_PREHEAT (PREPARE_ZOFFSET + ENABLED(HAS_PREHEAT))
#define PREPARE_COOLDOWN (PREPARE_PREHEAT + EITHER(HAS_HOTEND, HAS_HEATED_BED))
#define PREPARE_CHANGEFIL (PREPARE_COOLDOWN + ENABLED(ADVANCED_PAUSE_FEATURE))
#define PREPARE_CUSTOM_MENU (PREPARE_CHANGEFIL + ENABLED(HAS_CUSTOM_MENU))
#define PREPARE_TOTAL PREPARE_CUSTOM_MENU
switch (item) {
case PREPARE_BACK:
if (draw)
Draw_Menu_Item(row, ICON_Back, F("Back"));
else
Draw_Main_Menu(1);
break;
case PREPARE_MOVE:
if (draw)
Draw_Menu_Item(row, ICON_Axis, F("Move"), nullptr, true);
else
Draw_Menu(Move);
break;
case PREPARE_DISABLE:
if (draw)
Draw_Menu_Item(row, ICON_CloseMotor, F("Disable Stepper"));
else
queue.inject(F("M84"));
break;
case PREPARE_HOME:
if (draw)
Draw_Menu_Item(row, ICON_SetHome, F("Homing"), nullptr, true);
else
Draw_Menu(HomeMenu);
break;
case PREPARE_MANUALLEVEL:
if (draw)
Draw_Menu_Item(row, ICON_PrintSize, F("Manual Leveling"), nullptr, true);
else {
if (axes_should_home()) {
Popup_Handler(Home);
gcode.home_all_axes(true);
}
#if HAS_LEVELING
level_state = planner.leveling_active;
set_bed_leveling_enabled(false);
#endif
Draw_Menu(ManualLevel);
}
break;
#if HAS_ZOFFSET_ITEM
case PREPARE_ZOFFSET:
if (draw)
Draw_Menu_Item(row, ICON_Zoffset, F("Z-Offset"), nullptr, true);
else {
#if HAS_LEVELING
level_state = planner.leveling_active;
set_bed_leveling_enabled(false);
#endif
Draw_Menu(ZOffset);
}
break;
#endif
#if HAS_PREHEAT
case PREPARE_PREHEAT:
if (draw)
Draw_Menu_Item(row, ICON_Temperature, F("Preheat"), nullptr, true);
else
Draw_Menu(Preheat);
break;
#endif
#if HAS_HOTEND || HAS_HEATED_BED
case PREPARE_COOLDOWN:
if (draw)
Draw_Menu_Item(row, ICON_Cool, F("Cooldown"));
else
thermalManager.cooldown();
break;
#endif
#if HAS_CUSTOM_MENU
case PREPARE_CUSTOM_MENU:
#ifndef CUSTOM_MENU_CONFIG_TITLE
#define CUSTOM_MENU_CONFIG_TITLE "Custom Commands"
#endif
if (draw)
Draw_Menu_Item(row, ICON_Version, F(CUSTOM_MENU_CONFIG_TITLE));
else
Draw_Menu(MenuCustom);
break;
#endif
#if ENABLED(ADVANCED_PAUSE_FEATURE)
case PREPARE_CHANGEFIL:
if (draw) {
Draw_Menu_Item(row, ICON_ResumeEEPROM, F("Change Filament")
#if ENABLED(FILAMENT_LOAD_UNLOAD_GCODES)
, nullptr, true
#endif
);
}
else {
#if ENABLED(FILAMENT_LOAD_UNLOAD_GCODES)
Draw_Menu(ChangeFilament);
#else
if (thermalManager.temp_hotend[0].target < thermalManager.extrude_min_temp)
Popup_Handler(ETemp);
else {
if (thermalManager.temp_hotend[0].is_below_target(-2)) {
Popup_Handler(Heating);
thermalManager.wait_for_hotend(0);
}
Popup_Handler(FilChange);
sprintf_P(cmd, PSTR("M600 B1 R%i"), thermalManager.temp_hotend[0].target);
gcode.process_subcommands_now(cmd);
}
#endif
}
break;
#endif
}
break;
case HomeMenu:
#define HOME_BACK 0
#define HOME_ALL (HOME_BACK + 1)
#define HOME_X (HOME_ALL + 1)
#define HOME_Y (HOME_X + 1)
#define HOME_Z (HOME_Y + 1)
#define HOME_SET (HOME_Z + 1)
#define HOME_TOTAL HOME_SET
switch (item) {
case HOME_BACK:
if (draw)
Draw_Menu_Item(row, ICON_Back, F("Back"));
else
Draw_Menu(Prepare, PREPARE_HOME);
break;
case HOME_ALL:
if (draw)
Draw_Menu_Item(row, ICON_Homing, F("Home All"));
else {
Popup_Handler(Home);
gcode.home_all_axes(true);
Redraw_Menu();
}
break;
case HOME_X:
if (draw)
Draw_Menu_Item(row, ICON_MoveX, F("Home X"));
else {
Popup_Handler(Home);
gcode.process_subcommands_now(F("G28 X"));
planner.synchronize();
Redraw_Menu();
}
break;
case HOME_Y:
if (draw)
Draw_Menu_Item(row, ICON_MoveY, F("Home Y"));
else {
Popup_Handler(Home);
gcode.process_subcommands_now(F("G28 Y"));
planner.synchronize();
Redraw_Menu();
}
break;
case HOME_Z:
if (draw)
Draw_Menu_Item(row, ICON_MoveZ, F("Home Z"));
else {
Popup_Handler(Home);
gcode.process_subcommands_now(F("G28 Z"));
planner.synchronize();
Redraw_Menu();
}
break;
case HOME_SET:
if (draw)
Draw_Menu_Item(row, ICON_SetHome, F("Set Home Position"));
else {
gcode.process_subcommands_now(F("G92X0Y0Z0"));
AudioFeedback();
}
break;
}
break;
case Move:
#define MOVE_BACK 0
#define MOVE_X (MOVE_BACK + 1)
#define MOVE_Y (MOVE_X + 1)
#define MOVE_Z (MOVE_Y + 1)
#define MOVE_E (MOVE_Z + ENABLED(HAS_HOTEND))
#define MOVE_P (MOVE_E + ENABLED(HAS_BED_PROBE))
#define MOVE_LIVE (MOVE_P + 1)
#define MOVE_TOTAL MOVE_LIVE
switch (item) {
case MOVE_BACK:
if (draw)
Draw_Menu_Item(row, ICON_Back, F("Back"));
else {
#if HAS_BED_PROBE
probe_deployed = false;
probe.set_deployed(probe_deployed);
#endif
Draw_Menu(Prepare, PREPARE_MOVE);
}
break;
case MOVE_X:
if (draw) {
Draw_Menu_Item(row, ICON_MoveX, F("Move X"));
Draw_Float(current_position.x, row, false);
}
else
Modify_Value(current_position.x, X_MIN_POS, X_MAX_POS, 10);
break;
case MOVE_Y:
if (draw) {
Draw_Menu_Item(row, ICON_MoveY, F("Move Y"));
Draw_Float(current_position.y, row);
}
else
Modify_Value(current_position.y, Y_MIN_POS, Y_MAX_POS, 10);
break;
case MOVE_Z:
if (draw) {
Draw_Menu_Item(row, ICON_MoveZ, F("Move Z"));
Draw_Float(current_position.z, row);
}
else
Modify_Value(current_position.z, Z_MIN_POS, Z_MAX_POS, 10);
break;
#if HAS_HOTEND
case MOVE_E:
if (draw) {
Draw_Menu_Item(row, ICON_Extruder, F("Extruder"));
current_position.e = 0;
sync_plan_position();
Draw_Float(current_position.e, row);
}
else {
if (thermalManager.temp_hotend[0].target < thermalManager.extrude_min_temp) {
Popup_Handler(ETemp);
}
else {
if (thermalManager.temp_hotend[0].is_below_target(-2)) {
Popup_Handler(Heating);
thermalManager.wait_for_hotend(0);
Redraw_Menu();
}
current_position.e = 0;
sync_plan_position();
Modify_Value(current_position.e, -500, 500, 10);
}
}
break;
#endif // HAS_HOTEND
#if HAS_BED_PROBE
case MOVE_P:
if (draw) {
Draw_Menu_Item(row, ICON_StockConfiguration, F("Probe"));
Draw_Checkbox(row, probe_deployed);
}
else {
probe_deployed = !probe_deployed;
probe.set_deployed(probe_deployed);
Draw_Checkbox(row, probe_deployed);
}
break;
#endif
case MOVE_LIVE:
if (draw) {
Draw_Menu_Item(row, ICON_Axis, F("Live Movement"));
Draw_Checkbox(row, livemove);
}
else {
livemove = !livemove;
Draw_Checkbox(row, livemove);
}
break;
}
break;
case ManualLevel:
#define MLEVEL_BACK 0
#define MLEVEL_PROBE (MLEVEL_BACK + ENABLED(HAS_BED_PROBE))
#define MLEVEL_BL (MLEVEL_PROBE + 1)
#define MLEVEL_TL (MLEVEL_BL + 1)
#define MLEVEL_TR (MLEVEL_TL + 1)
#define MLEVEL_BR (MLEVEL_TR + 1)
#define MLEVEL_C (MLEVEL_BR + 1)
#define MLEVEL_ZPOS (MLEVEL_C + 1)
#define MLEVEL_TOTAL MLEVEL_ZPOS
static float mlev_z_pos = 0;
static bool use_probe = false;
switch (item) {
case MLEVEL_BACK:
if (draw)
Draw_Menu_Item(row, ICON_Back, F("Back"));
else {
TERN_(HAS_LEVELING, set_bed_leveling_enabled(level_state));
Draw_Menu(Prepare, PREPARE_MANUALLEVEL);
}
break;
#if HAS_BED_PROBE
case MLEVEL_PROBE:
if (draw) {
Draw_Menu_Item(row, ICON_Zoffset, F("Use Probe"));
Draw_Checkbox(row, use_probe);
}
else {
use_probe = !use_probe;
Draw_Checkbox(row, use_probe);
if (use_probe) {
Popup_Handler(Level);
corner_avg = 0;
#define PROBE_X_MIN _MAX(0 + corner_pos, X_MIN_POS + probe.offset.x, X_MIN_POS + PROBING_MARGIN) - probe.offset.x
#define PROBE_X_MAX _MIN((X_BED_SIZE + X_MIN_POS) - corner_pos, X_MAX_POS + probe.offset.x, X_MAX_POS - PROBING_MARGIN) - probe.offset.x
#define PROBE_Y_MIN _MAX(0 + corner_pos, Y_MIN_POS + probe.offset.y, Y_MIN_POS + PROBING_MARGIN) - probe.offset.y
#define PROBE_Y_MAX _MIN((Y_BED_SIZE + Y_MIN_POS) - corner_pos, Y_MAX_POS + probe.offset.y, Y_MAX_POS - PROBING_MARGIN) - probe.offset.y
corner_avg += probe.probe_at_point(PROBE_X_MIN, PROBE_Y_MIN, PROBE_PT_RAISE, 0, false);
corner_avg += probe.probe_at_point(PROBE_X_MIN, PROBE_Y_MAX, PROBE_PT_RAISE, 0, false);
corner_avg += probe.probe_at_point(PROBE_X_MAX, PROBE_Y_MAX, PROBE_PT_RAISE, 0, false);
corner_avg += probe.probe_at_point(PROBE_X_MAX, PROBE_Y_MIN, PROBE_PT_STOW, 0, false);
corner_avg /= 4;
Redraw_Menu();
}
}
break;
#endif
case MLEVEL_BL:
if (draw)
Draw_Menu_Item(row, ICON_AxisBL, F("Bottom Left"));
else {
Popup_Handler(MoveWait);
if (use_probe) {
#if HAS_BED_PROBE
sprintf_P(cmd, PSTR("G0 F4000\nG0 Z10\nG0 X%s Y%s"), dtostrf(PROBE_X_MIN, 1, 3, str_1), dtostrf(PROBE_Y_MIN, 1, 3, str_2));
gcode.process_subcommands_now(cmd);
planner.synchronize();
Popup_Handler(ManualProbing);
#endif
}
else {
sprintf_P(cmd, PSTR("G0 F4000\nG0 Z10\nG0 X%s Y%s\nG0 F300 Z%s"), dtostrf(corner_pos, 1, 3, str_1), dtostrf(corner_pos, 1, 3, str_2), dtostrf(mlev_z_pos, 1, 3, str_3));
gcode.process_subcommands_now(cmd);
planner.synchronize();
Redraw_Menu();
}
}
break;
case MLEVEL_TL:
if (draw)
Draw_Menu_Item(row, ICON_AxisTL, F("Top Left"));
else {
Popup_Handler(MoveWait);
if (use_probe) {
#if HAS_BED_PROBE
sprintf_P(cmd, PSTR("G0 F4000\nG0 Z10\nG0 X%s Y%s"), dtostrf(PROBE_X_MIN, 1, 3, str_1), dtostrf(PROBE_Y_MAX, 1, 3, str_2));
gcode.process_subcommands_now(cmd);
planner.synchronize();
Popup_Handler(ManualProbing);
#endif
}
else {
sprintf_P(cmd, PSTR("G0 F4000\nG0 Z10\nG0 X%s Y%s\nG0 F300 Z%s"), dtostrf(corner_pos, 1, 3, str_1), dtostrf((Y_BED_SIZE + Y_MIN_POS) - corner_pos, 1, 3, str_2), dtostrf(mlev_z_pos, 1, 3, str_3));
gcode.process_subcommands_now(cmd);
planner.synchronize();
Redraw_Menu();
}
}
break;
case MLEVEL_TR:
if (draw)
Draw_Menu_Item(row, ICON_AxisTR, F("Top Right"));
else {
Popup_Handler(MoveWait);
if (use_probe) {
#if HAS_BED_PROBE
sprintf_P(cmd, PSTR("G0 F4000\nG0 Z10\nG0 X%s Y%s"), dtostrf(PROBE_X_MAX, 1, 3, str_1), dtostrf(PROBE_Y_MAX, 1, 3, str_2));
gcode.process_subcommands_now(cmd);
planner.synchronize();
Popup_Handler(ManualProbing);
#endif
}
else {
sprintf_P(cmd, PSTR("G0 F4000\nG0 Z10\nG0 X%s Y%s\nG0 F300 Z%s"), dtostrf((X_BED_SIZE + X_MIN_POS) - corner_pos, 1, 3, str_1), dtostrf((Y_BED_SIZE + Y_MIN_POS) - corner_pos, 1, 3, str_2), dtostrf(mlev_z_pos, 1, 3, str_3));
gcode.process_subcommands_now(cmd);
planner.synchronize();
Redraw_Menu();
}
}
break;
case MLEVEL_BR:
if (draw)
Draw_Menu_Item(row, ICON_AxisBR, F("Bottom Right"));
else {
Popup_Handler(MoveWait);
if (use_probe) {
#if HAS_BED_PROBE
sprintf_P(cmd, PSTR("G0 F4000\nG0 Z10\nG0 X%s Y%s"), dtostrf(PROBE_X_MAX, 1, 3, str_1), dtostrf(PROBE_Y_MIN, 1, 3, str_2));
gcode.process_subcommands_now(cmd);
planner.synchronize();
Popup_Handler(ManualProbing);
#endif
}
else {
sprintf_P(cmd, PSTR("G0 F4000\nG0 Z10\nG0 X%s Y%s\nG0 F300 Z%s"), dtostrf((X_BED_SIZE + X_MIN_POS) - corner_pos, 1, 3, str_1), dtostrf(corner_pos, 1, 3, str_2), dtostrf(mlev_z_pos, 1, 3, str_3));
gcode.process_subcommands_now(cmd);
planner.synchronize();
Redraw_Menu();
}
}
break;
case MLEVEL_C:
if (draw)
Draw_Menu_Item(row, ICON_AxisC, F("Center"));
else {
Popup_Handler(MoveWait);
if (use_probe) {
#if HAS_BED_PROBE
sprintf_P(cmd, PSTR("G0 F4000\nG0 Z10\nG0 X%s Y%s"), dtostrf(X_MAX_POS / 2.0f - probe.offset.x, 1, 3, str_1), dtostrf(Y_MAX_POS / 2.0f - probe.offset.y, 1, 3, str_2));
gcode.process_subcommands_now(cmd);
planner.synchronize();
Popup_Handler(ManualProbing);
#endif
}
else {
sprintf_P(cmd, PSTR("G0 F4000\nG0 Z10\nG0 X%s Y%s\nG0 F300 Z%s"), dtostrf((X_BED_SIZE + X_MIN_POS) / 2.0f, 1, 3, str_1), dtostrf((Y_BED_SIZE + Y_MIN_POS) / 2.0f, 1, 3, str_2), dtostrf(mlev_z_pos, 1, 3, str_3));
gcode.process_subcommands_now(cmd);
planner.synchronize();
Redraw_Menu();
}
}
break;
case MLEVEL_ZPOS:
if (draw) {
Draw_Menu_Item(row, ICON_SetZOffset, F("Z Position"));
Draw_Float(mlev_z_pos, row, false, 100);
}
else
Modify_Value(mlev_z_pos, 0, MAX_Z_OFFSET, 100);
break;
}
break;
#if HAS_ZOFFSET_ITEM
case ZOffset:
#define ZOFFSET_BACK 0
#define ZOFFSET_HOME (ZOFFSET_BACK + 1)
#define ZOFFSET_MODE (ZOFFSET_HOME + 1)
#define ZOFFSET_OFFSET (ZOFFSET_MODE + 1)
#define ZOFFSET_UP (ZOFFSET_OFFSET + 1)
#define ZOFFSET_DOWN (ZOFFSET_UP + 1)
#define ZOFFSET_SAVE (ZOFFSET_DOWN + ENABLED(EEPROM_SETTINGS))
#define ZOFFSET_TOTAL ZOFFSET_SAVE
switch (item) {
case ZOFFSET_BACK:
if (draw)
Draw_Menu_Item(row, ICON_Back, F("Back"));
else {
liveadjust = false;
TERN_(HAS_LEVELING, set_bed_leveling_enabled(level_state));
Draw_Menu(Prepare, PREPARE_ZOFFSET);
}
break;
case ZOFFSET_HOME:
if (draw)
Draw_Menu_Item(row, ICON_Homing, F("Home Z Axis"));
else {
Popup_Handler(Home);
gcode.process_subcommands_now(F("G28 Z"));
Popup_Handler(MoveWait);
#if ENABLED(Z_SAFE_HOMING)
planner.synchronize();
sprintf_P(cmd, PSTR("G0 F4000 X%s Y%s"), dtostrf(Z_SAFE_HOMING_X_POINT, 1, 3, str_1), dtostrf(Z_SAFE_HOMING_Y_POINT, 1, 3, str_2));
gcode.process_subcommands_now(cmd);
#else
gcode.process_subcommands_now(F("G0 F4000 X117.5 Y117.5"));
#endif
gcode.process_subcommands_now(F("G0 F300 Z0"));
planner.synchronize();
Redraw_Menu();
}
break;
case ZOFFSET_MODE:
if (draw) {
Draw_Menu_Item(row, ICON_Zoffset, F("Live Adjustment"));
Draw_Checkbox(row, liveadjust);
}
else {
if (!liveadjust) {
if (axes_should_home()) {
Popup_Handler(Home);
gcode.home_all_axes(true);
}
Popup_Handler(MoveWait);
#if ENABLED(Z_SAFE_HOMING)
planner.synchronize();
sprintf_P(cmd, PSTR("G0 F4000 X%s Y%s"), dtostrf(Z_SAFE_HOMING_X_POINT, 1, 3, str_1), dtostrf(Z_SAFE_HOMING_Y_POINT, 1, 3, str_2));
gcode.process_subcommands_now(cmd);
#else
gcode.process_subcommands_now(F("G0 F4000 X117.5 Y117.5"));
#endif
gcode.process_subcommands_now(F("G0 F300 Z0"));
planner.synchronize();
Redraw_Menu();
}
liveadjust = !liveadjust;
Draw_Checkbox(row, liveadjust);
}
break;
case ZOFFSET_OFFSET:
if (draw) {
Draw_Menu_Item(row, ICON_SetZOffset, F("Z Offset"));
Draw_Float(zoffsetvalue, row, false, 100);
}
else
Modify_Value(zoffsetvalue, MIN_Z_OFFSET, MAX_Z_OFFSET, 100);
break;
case ZOFFSET_UP:
if (draw)
Draw_Menu_Item(row, ICON_Axis, F("Microstep Up"));
else {
if (zoffsetvalue < MAX_Z_OFFSET) {
if (liveadjust) {
gcode.process_subcommands_now(F("M290 Z0.01"));
planner.synchronize();
}
zoffsetvalue += 0.01;
Draw_Float(zoffsetvalue, row - 1, false, 100);
}
}
break;
case ZOFFSET_DOWN:
if (draw)
Draw_Menu_Item(row, ICON_AxisD, F("Microstep Down"));
else {
if (zoffsetvalue > MIN_Z_OFFSET) {
if (liveadjust) {
gcode.process_subcommands_now(F("M290 Z-0.01"));
planner.synchronize();
}
zoffsetvalue -= 0.01;
Draw_Float(zoffsetvalue, row - 2, false, 100);
}
}
break;
#if ENABLED(EEPROM_SETTINGS)
case ZOFFSET_SAVE:
if (draw)
Draw_Menu_Item(row, ICON_WriteEEPROM, F("Save"));
else
AudioFeedback(settings.save());
break;
#endif
}
break;
#endif
#if HAS_PREHEAT
case Preheat: {
#define PREHEAT_MODE (PREHEAT_BACK + 1)
#define PREHEAT_1 (PREHEAT_MODE + 1)
#define PREHEAT_2 (PREHEAT_1 + (PREHEAT_COUNT >= 2))
#define PREHEAT_3 (PREHEAT_2 + (PREHEAT_COUNT >= 3))
#define PREHEAT_4 (PREHEAT_3 + (PREHEAT_COUNT >= 4))
#define PREHEAT_5 (PREHEAT_4 + (PREHEAT_COUNT >= 5))
#define PREHEAT_TOTAL PREHEAT_5
auto do_preheat = [](const uint8_t m) {
thermalManager.cooldown();
if (preheatmode == 0 || preheatmode == 1) { ui.preheat_hotend_and_fan(m); }
if (preheatmode == 0 || preheatmode == 2) ui.preheat_bed(m);
};
switch (item) {
case PREHEAT_BACK:
if (draw)
Draw_Menu_Item(row, ICON_Back, F("Back"));
else
Draw_Menu(Prepare, PREPARE_PREHEAT);
break;
case PREHEAT_MODE:
if (draw) {
Draw_Menu_Item(row, ICON_Homing, F("Preheat Mode"));
Draw_Option(preheatmode, preheat_modes, row);
}
else
Modify_Option(preheatmode, preheat_modes, 2);
break;
#define _PREHEAT_CASE(N) \
case PREHEAT_##N: { \
if (draw) Draw_Menu_Item(row, ICON_Temperature, F(PREHEAT_## N ##_LABEL)); \
else do_preheat(N - 1); \
} break;
REPEAT_1(PREHEAT_COUNT, _PREHEAT_CASE)
}
} break;
#endif // HAS_PREHEAT
#if ENABLED(FILAMENT_LOAD_UNLOAD_GCODES)
case ChangeFilament:
#define CHANGEFIL_BACK 0
#define CHANGEFIL_LOAD (CHANGEFIL_BACK + 1)
#define CHANGEFIL_UNLOAD (CHANGEFIL_LOAD + 1)
#define CHANGEFIL_CHANGE (CHANGEFIL_UNLOAD + 1)
#define CHANGEFIL_TOTAL CHANGEFIL_CHANGE
switch (item) {
case CHANGEFIL_BACK:
if (draw)
Draw_Menu_Item(row, ICON_Back, F("Back"));
else
Draw_Menu(Prepare, PREPARE_CHANGEFIL);
break;
case CHANGEFIL_LOAD:
if (draw)
Draw_Menu_Item(row, ICON_WriteEEPROM, F("Load Filament"));
else {
if (thermalManager.temp_hotend[0].target < thermalManager.extrude_min_temp)
Popup_Handler(ETemp);
else {
if (thermalManager.temp_hotend[0].is_below_target(-2)) {
Popup_Handler(Heating);
thermalManager.wait_for_hotend(0);
}
Popup_Handler(FilLoad);
gcode.process_subcommands_now(F("M701"));
planner.synchronize();
Redraw_Menu();
}
}
break;
case CHANGEFIL_UNLOAD:
if (draw)
Draw_Menu_Item(row, ICON_ReadEEPROM, F("Unload Filament"));
else {
if (thermalManager.temp_hotend[0].target < thermalManager.extrude_min_temp) {
Popup_Handler(ETemp);
}
else {
if (thermalManager.temp_hotend[0].is_below_target(-2)) {
Popup_Handler(Heating);
thermalManager.wait_for_hotend(0);
}
Popup_Handler(FilLoad, true);
gcode.process_subcommands_now(F("M702"));
planner.synchronize();
Redraw_Menu();
}
}
break;
case CHANGEFIL_CHANGE:
if (draw)
Draw_Menu_Item(row, ICON_ResumeEEPROM, F("Change Filament"));
else {
if (thermalManager.temp_hotend[0].target < thermalManager.extrude_min_temp)
Popup_Handler(ETemp);
else {
if (thermalManager.temp_hotend[0].is_below_target(-2)) {
Popup_Handler(Heating);
thermalManager.wait_for_hotend(0);
}
Popup_Handler(FilChange);
sprintf_P(cmd, PSTR("M600 B1 R%i"), thermalManager.temp_hotend[0].target);
gcode.process_subcommands_now(cmd);
}
}
break;
}
break;
#endif // FILAMENT_LOAD_UNLOAD_GCODES
#if HAS_CUSTOM_MENU
case MenuCustom:
#define CUSTOM_MENU_BACK 0
#define CUSTOM_MENU_1 1
#define CUSTOM_MENU_2 2
#define CUSTOM_MENU_3 3
#define CUSTOM_MENU_4 4
#define CUSTOM_MENU_5 5
#define CUSTOM_MENU_TOTAL CUSTOM_MENU_COUNT
switch (item) {
case CUSTOM_MENU_BACK:
if (draw)
Draw_Menu_Item(row, ICON_Back, F("Back"));
else
Draw_Menu(Prepare, PREPARE_CUSTOM_MENU);
break;
#if CUSTOM_MENU_COUNT >= 1
case CUSTOM_MENU_1:
if (draw)
Draw_Menu_Item(row, ICON_Info, F(CONFIG_MENU_ITEM_1_DESC));
else {
Popup_Handler(Custom);
//queue.inject(F(CONFIG_MENU_ITEM_1_GCODE)); // Old code
gcode.process_subcommands_now(F(CONFIG_MENU_ITEM_1_GCODE));
planner.synchronize();
Redraw_Menu();
#if ENABLED(CUSTOM_MENU_CONFIG_SCRIPT_AUDIBLE_FEEDBACK)
AudioFeedback();
#endif
#ifdef CUSTOM_MENU_CONFIG_SCRIPT_RETURN
queue.inject(F(CUSTOM_MENU_CONFIG_SCRIPT_DONE));
#endif
}
break;
#endif
#if CUSTOM_MENU_COUNT >= 2
case CUSTOM_MENU_2:
if (draw)
Draw_Menu_Item(row, ICON_Info, F(CONFIG_MENU_ITEM_2_DESC));
else {
Popup_Handler(Custom);
gcode.process_subcommands_now(F(CONFIG_MENU_ITEM_2_GCODE));
planner.synchronize();
Redraw_Menu();
#if ENABLED(CUSTOM_MENU_CONFIG_SCRIPT_AUDIBLE_FEEDBACK)
AudioFeedback();
#endif
#ifdef CUSTOM_MENU_CONFIG_SCRIPT_RETURN
queue.inject(F(CUSTOM_MENU_CONFIG_SCRIPT_DONE));
#endif
}
break;
#endif
#if CUSTOM_MENU_COUNT >= 3
case CUSTOM_MENU_3:
if (draw)
Draw_Menu_Item(row, ICON_Info, F(CONFIG_MENU_ITEM_3_DESC));
else {
Popup_Handler(Custom);
gcode.process_subcommands_now(F(CONFIG_MENU_ITEM_3_GCODE));
planner.synchronize();
Redraw_Menu();
#if ENABLED(CUSTOM_MENU_CONFIG_SCRIPT_AUDIBLE_FEEDBACK)
AudioFeedback();
#endif
#ifdef CUSTOM_MENU_CONFIG_SCRIPT_RETURN
queue.inject(F(CUSTOM_MENU_CONFIG_SCRIPT_DONE));
#endif
}
break;
#endif
#if CUSTOM_MENU_COUNT >= 4
case CUSTOM_MENU_4:
if (draw)
Draw_Menu_Item(row, ICON_Info, F(CONFIG_MENU_ITEM_4_DESC));
else {
Popup_Handler(Custom);
gcode.process_subcommands_now(F(CONFIG_MENU_ITEM_4_GCODE));
planner.synchronize();
Redraw_Menu();
#if ENABLED(CUSTOM_MENU_CONFIG_SCRIPT_AUDIBLE_FEEDBACK)
AudioFeedback();
#endif
#ifdef CUSTOM_MENU_CONFIG_SCRIPT_RETURN
queue.inject(F(CUSTOM_MENU_CONFIG_SCRIPT_DONE));
#endif
}
break;
#endif
#if CUSTOM_MENU_COUNT >= 5
case CUSTOM_MENU_5:
if (draw)
Draw_Menu_Item(row, ICON_Info, F(CONFIG_MENU_ITEM_5_DESC));
else {
Popup_Handler(Custom);
gcode.process_subcommands_now(F(CONFIG_MENU_ITEM_5_GCODE));
planner.synchronize();
Redraw_Menu();
#if ENABLED(CUSTOM_MENU_CONFIG_SCRIPT_AUDIBLE_FEEDBACK)
AudioFeedback();
#endif
#ifdef CUSTOM_MENU_CONFIG_SCRIPT_RETURN
queue.inject(F(CUSTOM_MENU_CONFIG_SCRIPT_DONE));
#endif
}
break;
#endif // Custom Menu
}
break;
#endif // HAS_CUSTOM_MENU
case Control:
#define CONTROL_BACK 0
#define CONTROL_TEMP (CONTROL_BACK + 1)
#define CONTROL_MOTION (CONTROL_TEMP + 1)
#define CONTROL_VISUAL (CONTROL_MOTION + 1)
#define CONTROL_ADVANCED (CONTROL_VISUAL + 1)
#define CONTROL_SAVE (CONTROL_ADVANCED + ENABLED(EEPROM_SETTINGS))
#define CONTROL_RESTORE (CONTROL_SAVE + ENABLED(EEPROM_SETTINGS))
#define CONTROL_RESET (CONTROL_RESTORE + ENABLED(EEPROM_SETTINGS))
#define CONTROL_INFO (CONTROL_RESET + 1)
#define CONTROL_TOTAL CONTROL_INFO
switch (item) {
case CONTROL_BACK:
if (draw)
Draw_Menu_Item(row, ICON_Back, F("Back"));
else
Draw_Main_Menu(2);
break;
case CONTROL_TEMP:
if (draw)
Draw_Menu_Item(row, ICON_Temperature, F("Temperature"), nullptr, true);
else
Draw_Menu(TempMenu);
break;
case CONTROL_MOTION:
if (draw)
Draw_Menu_Item(row, ICON_Motion, F("Motion"), nullptr, true);
else
Draw_Menu(Motion);
break;
case CONTROL_VISUAL:
if (draw)
Draw_Menu_Item(row, ICON_PrintSize, F("Visual"), nullptr, true);
else
Draw_Menu(Visual);
break;
case CONTROL_ADVANCED:
if (draw)
Draw_Menu_Item(row, ICON_Version, F("Advanced"), nullptr, true);
else
Draw_Menu(Advanced);
break;
#if ENABLED(EEPROM_SETTINGS)
case CONTROL_SAVE:
if (draw)
Draw_Menu_Item(row, ICON_WriteEEPROM, F("Store Settings"));
else
AudioFeedback(settings.save());
break;
case CONTROL_RESTORE:
if (draw)
Draw_Menu_Item(row, ICON_ReadEEPROM, F("Restore Settings"));
else
AudioFeedback(settings.load());
break;
case CONTROL_RESET:
if (draw)
Draw_Menu_Item(row, ICON_Temperature, F("Reset to Defaults"));
else {
settings.reset();
AudioFeedback();
}
break;
#endif
case CONTROL_INFO:
if (draw)
Draw_Menu_Item(row, ICON_Info, F("Info"));
else
Draw_Menu(Info);
break;
}
break;
case TempMenu:
#define TEMP_BACK 0
#define TEMP_HOTEND (TEMP_BACK + ENABLED(HAS_HOTEND))
#define TEMP_BED (TEMP_HOTEND + ENABLED(HAS_HEATED_BED))
#define TEMP_FAN (TEMP_BED + ENABLED(HAS_FAN))
#define TEMP_PID (TEMP_FAN + ANY(HAS_HOTEND, HAS_HEATED_BED))
#define TEMP_PREHEAT1 (TEMP_PID + (PREHEAT_COUNT >= 1))
#define TEMP_PREHEAT2 (TEMP_PREHEAT1 + (PREHEAT_COUNT >= 2))
#define TEMP_PREHEAT3 (TEMP_PREHEAT2 + (PREHEAT_COUNT >= 3))
#define TEMP_PREHEAT4 (TEMP_PREHEAT3 + (PREHEAT_COUNT >= 4))
#define TEMP_PREHEAT5 (TEMP_PREHEAT4 + (PREHEAT_COUNT >= 5))
#define TEMP_TOTAL TEMP_PREHEAT5
switch (item) {
case TEMP_BACK:
if (draw)
Draw_Menu_Item(row, ICON_Back, F("Back"));
else
Draw_Menu(Control, CONTROL_TEMP);
break;
#if HAS_HOTEND
case TEMP_HOTEND:
if (draw) {
Draw_Menu_Item(row, ICON_SetEndTemp, F("Hotend"));
Draw_Float(thermalManager.temp_hotend[0].target, row, false, 1);
}
else
Modify_Value(thermalManager.temp_hotend[0].target, MIN_E_TEMP, MAX_E_TEMP, 1);
break;
#endif
#if HAS_HEATED_BED
case TEMP_BED:
if (draw) {
Draw_Menu_Item(row, ICON_SetBedTemp, F("Bed"));
Draw_Float(thermalManager.temp_bed.target, row, false, 1);
}
else
Modify_Value(thermalManager.temp_bed.target, MIN_BED_TEMP, MAX_BED_TEMP, 1);
break;
#endif
#if HAS_FAN
case TEMP_FAN:
if (draw) {
Draw_Menu_Item(row, ICON_FanSpeed, F("Fan"));
Draw_Float(thermalManager.fan_speed[0], row, false, 1);
}
else
Modify_Value(thermalManager.fan_speed[0], MIN_FAN_SPEED, MAX_FAN_SPEED, 1);
break;
#endif
#if HAS_HOTEND || HAS_HEATED_BED
case TEMP_PID:
if (draw)
Draw_Menu_Item(row, ICON_Step, F("PID"), nullptr, true);
else
Draw_Menu(PID);
break;
#endif
#define _TEMP_PREHEAT_CASE(N) \
case TEMP_PREHEAT##N: { \
if (draw) Draw_Menu_Item(row, ICON_Step, F(PREHEAT_## N ##_LABEL), nullptr, true); \
else Draw_Menu(Preheat##N); \
} break;
REPEAT_1(PREHEAT_COUNT, _TEMP_PREHEAT_CASE)
}
break;
#if HAS_HOTEND || HAS_HEATED_BED
case PID:
#define PID_BACK 0
#define PID_HOTEND (PID_BACK + ENABLED(HAS_HOTEND))
#define PID_BED (PID_HOTEND + ENABLED(HAS_HEATED_BED))
#define PID_CYCLES (PID_BED + 1)
#define PID_TOTAL PID_CYCLES
static uint8_t PID_cycles = 5;
switch (item) {
case PID_BACK:
if (draw)
Draw_Menu_Item(row, ICON_Back, F("Back"));
else
Draw_Menu(TempMenu, TEMP_PID);
break;
#if HAS_HOTEND
case PID_HOTEND:
if (draw)
Draw_Menu_Item(row, ICON_HotendTemp, F("Hotend"), nullptr, true);
else
Draw_Menu(HotendPID);
break;
#endif
#if HAS_HEATED_BED
case PID_BED:
if (draw)
Draw_Menu_Item(row, ICON_BedTemp, F("Bed"), nullptr, true);
else
Draw_Menu(BedPID);
break;
#endif
case PID_CYCLES:
if (draw) {
Draw_Menu_Item(row, ICON_FanSpeed, F("Cycles"));
Draw_Float(PID_cycles, row, false, 1);
}
else
Modify_Value(PID_cycles, 3, 50, 1);
break;
}
break;
#endif // HAS_HOTEND || HAS_HEATED_BED
#if HAS_HOTEND
case HotendPID:
#define HOTENDPID_BACK 0
#define HOTENDPID_TUNE (HOTENDPID_BACK + 1)
#define HOTENDPID_TEMP (HOTENDPID_TUNE + 1)
#define HOTENDPID_KP (HOTENDPID_TEMP + 1)
#define HOTENDPID_KI (HOTENDPID_KP + 1)
#define HOTENDPID_KD (HOTENDPID_KI + 1)
#define HOTENDPID_TOTAL HOTENDPID_KD
static uint16_t PID_e_temp = 180;
switch (item) {
case HOTENDPID_BACK:
if (draw)
Draw_Menu_Item(row, ICON_Back, F("Back"));
else
Draw_Menu(PID, PID_HOTEND);
break;
case HOTENDPID_TUNE:
if (draw)
Draw_Menu_Item(row, ICON_HotendTemp, F("Autotune"));
else {
Popup_Handler(PIDWait);
sprintf_P(cmd, PSTR("M303 E0 C%i S%i U1"), PID_cycles, PID_e_temp);
gcode.process_subcommands_now(cmd);
planner.synchronize();
Redraw_Menu();
}
break;
case HOTENDPID_TEMP:
if (draw) {
Draw_Menu_Item(row, ICON_Temperature, F("Temperature"));
Draw_Float(PID_e_temp, row, false, 1);
}
else
Modify_Value(PID_e_temp, MIN_E_TEMP, MAX_E_TEMP, 1);
break;
case HOTENDPID_KP:
if (draw) {
Draw_Menu_Item(row, ICON_Version, F("Kp Value"));
Draw_Float(thermalManager.temp_hotend[0].pid.p(), row, false, 100);
}
else
Modify_Value(thermalManager.temp_hotend[0].pid.Kp, 0, 5000, 100, thermalManager.updatePID);
break;
case HOTENDPID_KI:
if (draw) {
Draw_Menu_Item(row, ICON_Version, F("Ki Value"));
Draw_Float(thermalManager.temp_hotend[0].pid.i(), row, false, 100);
}
else
Modify_Value(thermalManager.temp_hotend[0].pid.Ki, 0, 5000, 100, thermalManager.updatePID);
break;
case HOTENDPID_KD:
if (draw) {
Draw_Menu_Item(row, ICON_Version, F("Kd Value"));
Draw_Float(thermalManager.temp_hotend[0].pid.d(), row, false, 100);
}
else
Modify_Value(thermalManager.temp_hotend[0].pid.Kd, 0, 5000, 100, thermalManager.updatePID);
break;
}
break;
#endif // HAS_HOTEND
#if HAS_HEATED_BED
case BedPID:
#define BEDPID_BACK 0
#define BEDPID_TUNE (BEDPID_BACK + 1)
#define BEDPID_TEMP (BEDPID_TUNE + 1)
#define BEDPID_KP (BEDPID_TEMP + 1)
#define BEDPID_KI (BEDPID_KP + 1)
#define BEDPID_KD (BEDPID_KI + 1)
#define BEDPID_TOTAL BEDPID_KD
static uint16_t PID_bed_temp = 60;
switch (item) {
case BEDPID_BACK:
if (draw)
Draw_Menu_Item(row, ICON_Back, F("Back"));
else
Draw_Menu(PID, PID_BED);
break;
case BEDPID_TUNE:
if (draw)
Draw_Menu_Item(row, ICON_HotendTemp, F("Autotune"));
else {
Popup_Handler(PIDWait);
sprintf_P(cmd, PSTR("M303 E-1 C%i S%i U1"), PID_cycles, PID_bed_temp);
gcode.process_subcommands_now(cmd);
planner.synchronize();
Redraw_Menu();
}
break;
case BEDPID_TEMP:
if (draw) {
Draw_Menu_Item(row, ICON_Temperature, F("Temperature"));
Draw_Float(PID_bed_temp, row, false, 1);
}
else
Modify_Value(PID_bed_temp, MIN_BED_TEMP, MAX_BED_TEMP, 1);
break;
case BEDPID_KP:
if (draw) {
Draw_Menu_Item(row, ICON_Version, F("Kp Value"));
Draw_Float(thermalManager.temp_bed.pid.p(), row, false, 100);
}
else {
Modify_Value(thermalManager.temp_bed.pid.Kp, 0, 5000, 100, thermalManager.updatePID);
}
break;
case BEDPID_KI:
if (draw) {
Draw_Menu_Item(row, ICON_Version, F("Ki Value"));
Draw_Float(thermalManager.temp_bed.pid.i(), row, false, 100);
}
else
Modify_Value(thermalManager.temp_bed.pid.Ki, 0, 5000, 100, thermalManager.updatePID);
break;
case BEDPID_KD:
if (draw) {
Draw_Menu_Item(row, ICON_Version, F("Kd Value"));
Draw_Float(thermalManager.temp_bed.pid.d(), row, false, 100);
}
else
Modify_Value(thermalManager.temp_bed.pid.Kd, 0, 5000, 100, thermalManager.updatePID);
break;
}
break;
#endif // HAS_HEATED_BED
#if HAS_PREHEAT
#define _PREHEAT_SUBMENU_CASE(N) case Preheat##N: preheat_submenu((N) - 1, item, TEMP_PREHEAT##N); break;
REPEAT_1(PREHEAT_COUNT, _PREHEAT_SUBMENU_CASE)
#endif
case Motion:
#define MOTION_BACK 0
#define MOTION_HOMEOFFSETS (MOTION_BACK + 1)
#define MOTION_SPEED (MOTION_HOMEOFFSETS + 1)
#define MOTION_ACCEL (MOTION_SPEED + 1)
#define MOTION_JERK (MOTION_ACCEL + ENABLED(HAS_CLASSIC_JERK))
#define MOTION_STEPS (MOTION_JERK + 1)
#define MOTION_FLOW (MOTION_STEPS + ENABLED(HAS_HOTEND))
#define MOTION_TOTAL MOTION_FLOW
switch (item) {
case MOTION_BACK:
if (draw)
Draw_Menu_Item(row, ICON_Back, F("Back"));
else
Draw_Menu(Control, CONTROL_MOTION);
break;
case MOTION_HOMEOFFSETS:
if (draw)
Draw_Menu_Item(row, ICON_SetHome, F("Home Offsets"), nullptr, true);
else
Draw_Menu(HomeOffsets);
break;
case MOTION_SPEED:
if (draw)
Draw_Menu_Item(row, ICON_MaxSpeed, F("Max Speed"), nullptr, true);
else
Draw_Menu(MaxSpeed);
break;
case MOTION_ACCEL:
if (draw)
Draw_Menu_Item(row, ICON_MaxAccelerated, F("Max Acceleration"), nullptr, true);
else
Draw_Menu(MaxAcceleration);
break;
#if HAS_CLASSIC_JERK
case MOTION_JERK:
if (draw)
Draw_Menu_Item(row, ICON_MaxJerk, F("Max Jerk"), nullptr, true);
else
Draw_Menu(MaxJerk);
break;
#endif
case MOTION_STEPS:
if (draw)
Draw_Menu_Item(row, ICON_Step, F("Steps/mm"), nullptr, true);
else
Draw_Menu(Steps);
break;
#if HAS_HOTEND
case MOTION_FLOW:
if (draw) {
Draw_Menu_Item(row, ICON_Speed, F("Flow Rate"));
Draw_Float(planner.flow_percentage[0], row, false, 1);
}
else
Modify_Value(planner.flow_percentage[0], MIN_FLOW_RATE, MAX_FLOW_RATE, 1);
break;
#endif
}
break;
case HomeOffsets:
#define HOMEOFFSETS_BACK 0
#define HOMEOFFSETS_XOFFSET (HOMEOFFSETS_BACK + 1)
#define HOMEOFFSETS_YOFFSET (HOMEOFFSETS_XOFFSET + 1)
#define HOMEOFFSETS_TOTAL HOMEOFFSETS_YOFFSET
switch (item) {
case HOMEOFFSETS_BACK:
if (draw)
Draw_Menu_Item(row, ICON_Back, F("Back"));
else
Draw_Menu(Motion, MOTION_HOMEOFFSETS);
break;
case HOMEOFFSETS_XOFFSET:
if (draw) {
Draw_Menu_Item(row, ICON_StepX, F("X Offset"));
Draw_Float(home_offset.x, row, false, 100);
}
else
Modify_Value(home_offset.x, -MAX_XY_OFFSET, MAX_XY_OFFSET, 100);
break;
case HOMEOFFSETS_YOFFSET:
if (draw) {
Draw_Menu_Item(row, ICON_StepY, F("Y Offset"));
Draw_Float(home_offset.y, row, false, 100);
}
else
Modify_Value(home_offset.y, -MAX_XY_OFFSET, MAX_XY_OFFSET, 100);
break;
}
break;
case MaxSpeed:
#define SPEED_BACK 0
#define SPEED_X (SPEED_BACK + 1)
#define SPEED_Y (SPEED_X + 1)
#define SPEED_Z (SPEED_Y + 1)
#define SPEED_E (SPEED_Z + ENABLED(HAS_HOTEND))
#define SPEED_TOTAL SPEED_E
switch (item) {
case SPEED_BACK:
if (draw)
Draw_Menu_Item(row, ICON_Back, F("Back"));
else
Draw_Menu(Motion, MOTION_SPEED);
break;
case SPEED_X:
if (draw) {
Draw_Menu_Item(row, ICON_MaxSpeedX, F("X Axis"));
Draw_Float(planner.settings.max_feedrate_mm_s[X_AXIS], row, false, 1);
}
else
Modify_Value(planner.settings.max_feedrate_mm_s[X_AXIS], 0, default_max_feedrate[X_AXIS] * 2, 1);
break;
#if HAS_Y_AXIS
case SPEED_Y:
if (draw) {
Draw_Menu_Item(row, ICON_MaxSpeedY, F("Y Axis"));
Draw_Float(planner.settings.max_feedrate_mm_s[Y_AXIS], row, false, 1);
}
else
Modify_Value(planner.settings.max_feedrate_mm_s[Y_AXIS], 0, default_max_feedrate[Y_AXIS] * 2, 1);
break;
#endif
#if HAS_Z_AXIS
case SPEED_Z:
if (draw) {
Draw_Menu_Item(row, ICON_MaxSpeedZ, F("Z Axis"));
Draw_Float(planner.settings.max_feedrate_mm_s[Z_AXIS], row, false, 1);
}
else
Modify_Value(planner.settings.max_feedrate_mm_s[Z_AXIS], 0, default_max_feedrate[Z_AXIS] * 2, 1);
break;
#endif
#if HAS_HOTEND
case SPEED_E:
if (draw) {
Draw_Menu_Item(row, ICON_MaxSpeedE, F("Extruder"));
Draw_Float(planner.settings.max_feedrate_mm_s[E_AXIS], row, false, 1);
}
else
Modify_Value(planner.settings.max_feedrate_mm_s[E_AXIS], 0, default_max_feedrate[E_AXIS] * 2, 1);
break;
#endif
}
break;
case MaxAcceleration:
#define ACCEL_BACK 0
#define ACCEL_X (ACCEL_BACK + 1)
#define ACCEL_Y (ACCEL_X + 1)
#define ACCEL_Z (ACCEL_Y + 1)
#define ACCEL_E (ACCEL_Z + ENABLED(HAS_HOTEND))
#define ACCEL_TOTAL ACCEL_E
switch (item) {
case ACCEL_BACK:
if (draw)
Draw_Menu_Item(row, ICON_Back, F("Back"));
else
Draw_Menu(Motion, MOTION_ACCEL);
break;
case ACCEL_X:
if (draw) {
Draw_Menu_Item(row, ICON_MaxAccX, F("X Axis"));
Draw_Float(planner.settings.max_acceleration_mm_per_s2[X_AXIS], row, false, 1);
}
else
Modify_Value(planner.settings.max_acceleration_mm_per_s2[X_AXIS], 0, default_max_acceleration[X_AXIS] * 2, 1);
break;
case ACCEL_Y:
if (draw) {
Draw_Menu_Item(row, ICON_MaxAccY, F("Y Axis"));
Draw_Float(planner.settings.max_acceleration_mm_per_s2[Y_AXIS], row, false, 1);
}
else
Modify_Value(planner.settings.max_acceleration_mm_per_s2[Y_AXIS], 0, default_max_acceleration[Y_AXIS] * 2, 1);
break;
case ACCEL_Z:
if (draw) {
Draw_Menu_Item(row, ICON_MaxAccZ, F("Z Axis"));
Draw_Float(planner.settings.max_acceleration_mm_per_s2[Z_AXIS], row, false, 1);
}
else
Modify_Value(planner.settings.max_acceleration_mm_per_s2[Z_AXIS], 0, default_max_acceleration[Z_AXIS] * 2, 1);
break;
#if HAS_HOTEND
case ACCEL_E:
if (draw) {
Draw_Menu_Item(row, ICON_MaxAccE, F("Extruder"));
Draw_Float(planner.settings.max_acceleration_mm_per_s2[E_AXIS], row, false, 1);
}
else
Modify_Value(planner.settings.max_acceleration_mm_per_s2[E_AXIS], 0, default_max_acceleration[E_AXIS] * 2, 1);
break;
#endif
}
break;
#if HAS_CLASSIC_JERK
case MaxJerk:
#define JERK_BACK 0
#define JERK_X (JERK_BACK + 1)
#define JERK_Y (JERK_X + 1)
#define JERK_Z (JERK_Y + 1)
#define JERK_E (JERK_Z + ENABLED(HAS_HOTEND))
#define JERK_TOTAL JERK_E
switch (item) {
case JERK_BACK:
if (draw)
Draw_Menu_Item(row, ICON_Back, F("Back"));
else
Draw_Menu(Motion, MOTION_JERK);
break;
case JERK_X:
if (draw) {
Draw_Menu_Item(row, ICON_MaxSpeedJerkX, F("X Axis"));
Draw_Float(planner.max_jerk[X_AXIS], row, false, 10);
}
else
Modify_Value(planner.max_jerk[X_AXIS], 0, default_max_jerk[X_AXIS] * 2, 10);
break;
case JERK_Y:
if (draw) {
Draw_Menu_Item(row, ICON_MaxSpeedJerkY, F("Y Axis"));
Draw_Float(planner.max_jerk[Y_AXIS], row, false, 10);
}
else
Modify_Value(planner.max_jerk[Y_AXIS], 0, default_max_jerk[Y_AXIS] * 2, 10);
break;
case JERK_Z:
if (draw) {
Draw_Menu_Item(row, ICON_MaxSpeedJerkZ, F("Z Axis"));
Draw_Float(planner.max_jerk[Z_AXIS], row, false, 10);
}
else
Modify_Value(planner.max_jerk[Z_AXIS], 0, default_max_jerk[Z_AXIS] * 2, 10);
break;
#if HAS_HOTEND
case JERK_E:
if (draw) {
Draw_Menu_Item(row, ICON_MaxSpeedJerkE, F("Extruder"));
Draw_Float(planner.max_jerk[E_AXIS], row, false, 10);
}
else
Modify_Value(planner.max_jerk[E_AXIS], 0, default_max_jerk[E_AXIS] * 2, 10);
break;
#endif
}
break;
#endif
case Steps:
#define STEPS_BACK 0
#define STEPS_X (STEPS_BACK + 1)
#define STEPS_Y (STEPS_X + 1)
#define STEPS_Z (STEPS_Y + 1)
#define STEPS_E (STEPS_Z + ENABLED(HAS_HOTEND))
#define STEPS_TOTAL STEPS_E
switch (item) {
case STEPS_BACK:
if (draw)
Draw_Menu_Item(row, ICON_Back, F("Back"));
else
Draw_Menu(Motion, MOTION_STEPS);
break;
case STEPS_X:
if (draw) {
Draw_Menu_Item(row, ICON_StepX, F("X Axis"));
Draw_Float(planner.settings.axis_steps_per_mm[X_AXIS], row, false, 10);
}
else
Modify_Value(planner.settings.axis_steps_per_mm[X_AXIS], 0, default_steps[X_AXIS] * 2, 10);
break;
case STEPS_Y:
if (draw) {
Draw_Menu_Item(row, ICON_StepY, F("Y Axis"));
Draw_Float(planner.settings.axis_steps_per_mm[Y_AXIS], row, false, 10);
}
else
Modify_Value(planner.settings.axis_steps_per_mm[Y_AXIS], 0, default_steps[Y_AXIS] * 2, 10);
break;
case STEPS_Z:
if (draw) {
Draw_Menu_Item(row, ICON_StepZ, F("Z Axis"));
Draw_Float(planner.settings.axis_steps_per_mm[Z_AXIS], row, false, 10);
}
else
Modify_Value(planner.settings.axis_steps_per_mm[Z_AXIS], 0, default_steps[Z_AXIS] * 2, 10);
break;
#if HAS_HOTEND
case STEPS_E:
if (draw) {
Draw_Menu_Item(row, ICON_StepE, F("Extruder"));
Draw_Float(planner.settings.axis_steps_per_mm[E_AXIS], row, false, 10);
}
else
Modify_Value(planner.settings.axis_steps_per_mm[E_AXIS], 0, 1000, 10);
break;
#endif
}
break;
case Visual:
#define VISUAL_BACK 0
#define VISUAL_BACKLIGHT (VISUAL_BACK + 1)
#define VISUAL_BRIGHTNESS (VISUAL_BACKLIGHT + 1)
#define VISUAL_TIME_FORMAT (VISUAL_BRIGHTNESS + 1)
#define VISUAL_COLOR_THEMES (VISUAL_TIME_FORMAT + 1)
#define VISUAL_TOTAL VISUAL_COLOR_THEMES
switch (item) {
case VISUAL_BACK:
if (draw)
Draw_Menu_Item(row, ICON_Back, F("Back"));
else
Draw_Menu(Control, CONTROL_VISUAL);
break;
case VISUAL_BACKLIGHT:
if (draw)
Draw_Menu_Item(row, ICON_Brightness, F("Display Off"));
else
ui.set_brightness(0);
break;
case VISUAL_BRIGHTNESS:
if (draw) {
Draw_Menu_Item(row, ICON_Brightness, F("LCD Brightness"));
Draw_Float(ui.brightness, row, false, 1);
}
else
Modify_Value(ui.brightness, LCD_BRIGHTNESS_MIN, LCD_BRIGHTNESS_MAX, 1, ui.refresh_brightness);
break;
case VISUAL_TIME_FORMAT:
if (draw) {
Draw_Menu_Item(row, ICON_PrintTime, F("Progress as __h__m"));
Draw_Checkbox(row, eeprom_settings.time_format_textual);
}
else {
eeprom_settings.time_format_textual = !eeprom_settings.time_format_textual;
Draw_Checkbox(row, eeprom_settings.time_format_textual);
}
break;
case VISUAL_COLOR_THEMES:
if (draw)
Draw_Menu_Item(row, ICON_MaxSpeed, F("UI Color Settings"), nullptr, true);
else
Draw_Menu(ColorSettings);
break;
}
break;
case ColorSettings:
#define COLORSETTINGS_BACK 0
#define COLORSETTINGS_CURSOR (COLORSETTINGS_BACK + 1)
#define COLORSETTINGS_SPLIT_LINE (COLORSETTINGS_CURSOR + 1)
#define COLORSETTINGS_MENU_TOP_TXT (COLORSETTINGS_SPLIT_LINE + 1)
#define COLORSETTINGS_MENU_TOP_BG (COLORSETTINGS_MENU_TOP_TXT + 1)
#define COLORSETTINGS_HIGHLIGHT_BORDER (COLORSETTINGS_MENU_TOP_BG + 1)
#define COLORSETTINGS_PROGRESS_PERCENT (COLORSETTINGS_HIGHLIGHT_BORDER + 1)
#define COLORSETTINGS_PROGRESS_TIME (COLORSETTINGS_PROGRESS_PERCENT + 1)
#define COLORSETTINGS_PROGRESS_STATUS_BAR (COLORSETTINGS_PROGRESS_TIME + 1)
#define COLORSETTINGS_PROGRESS_STATUS_AREA (COLORSETTINGS_PROGRESS_STATUS_BAR + 1)
#define COLORSETTINGS_PROGRESS_COORDINATES (COLORSETTINGS_PROGRESS_STATUS_AREA + 1)
#define COLORSETTINGS_PROGRESS_COORDINATES_LINE (COLORSETTINGS_PROGRESS_COORDINATES + 1)
#define COLORSETTINGS_TOTAL COLORSETTINGS_PROGRESS_COORDINATES_LINE
switch (item) {
case COLORSETTINGS_BACK:
if (draw)
Draw_Menu_Item(row, ICON_Back, F("Back"));
else
Draw_Menu(Visual, VISUAL_COLOR_THEMES);
break;
case COLORSETTINGS_CURSOR:
if (draw) {
Draw_Menu_Item(row, ICON_MaxSpeed, F("Cursor"));
Draw_Option(eeprom_settings.cursor_color, color_names, row, false, true);
}
else
Modify_Option(eeprom_settings.cursor_color, color_names, Custom_Colors);
break;
case COLORSETTINGS_SPLIT_LINE:
if (draw) {
Draw_Menu_Item(row, ICON_MaxSpeed, F("Menu Split Line"));
Draw_Option(eeprom_settings.menu_split_line, color_names, row, false, true);
}
else
Modify_Option(eeprom_settings.menu_split_line, color_names, Custom_Colors);
break;
case COLORSETTINGS_MENU_TOP_TXT:
if (draw) {
Draw_Menu_Item(row, ICON_MaxSpeed, F("Menu Header Text"));
Draw_Option(eeprom_settings.menu_top_txt, color_names, row, false, true);
}
else
Modify_Option(eeprom_settings.menu_top_txt, color_names, Custom_Colors);
break;
case COLORSETTINGS_MENU_TOP_BG:
if (draw) {
Draw_Menu_Item(row, ICON_MaxSpeed, F("Menu Header Bg"));
Draw_Option(eeprom_settings.menu_top_bg, color_names, row, false, true);
}
else
Modify_Option(eeprom_settings.menu_top_bg, color_names, Custom_Colors);
break;
case COLORSETTINGS_HIGHLIGHT_BORDER:
if (draw) {
Draw_Menu_Item(row, ICON_MaxSpeed, F("Highlight Box"));
Draw_Option(eeprom_settings.highlight_box, color_names, row, false, true);
}
else
Modify_Option(eeprom_settings.highlight_box, color_names, Custom_Colors);
break;
case COLORSETTINGS_PROGRESS_PERCENT:
if (draw) {
Draw_Menu_Item(row, ICON_MaxSpeed, F("Progress Percent"));
Draw_Option(eeprom_settings.progress_percent, color_names, row, false, true);
}
else
Modify_Option(eeprom_settings.progress_percent, color_names, Custom_Colors);
break;
case COLORSETTINGS_PROGRESS_TIME:
if (draw) {
Draw_Menu_Item(row, ICON_MaxSpeed, F("Progress Time"));
Draw_Option(eeprom_settings.progress_time, color_names, row, false, true);
}
else
Modify_Option(eeprom_settings.progress_time, color_names, Custom_Colors);
break;
case COLORSETTINGS_PROGRESS_STATUS_BAR:
if (draw) {
Draw_Menu_Item(row, ICON_MaxSpeed, F("Status Bar Text"));
Draw_Option(eeprom_settings.status_bar_text, color_names, row, false, true);
}
else
Modify_Option(eeprom_settings.status_bar_text, color_names, Custom_Colors);
break;
case COLORSETTINGS_PROGRESS_STATUS_AREA:
if (draw) {
Draw_Menu_Item(row, ICON_MaxSpeed, F("Status Area Text"));
Draw_Option(eeprom_settings.status_area_text, color_names, row, false, true);
}
else
Modify_Option(eeprom_settings.status_area_text, color_names, Custom_Colors);
break;
case COLORSETTINGS_PROGRESS_COORDINATES:
if (draw) {
Draw_Menu_Item(row, ICON_MaxSpeed, F("Coordinates Text"));
Draw_Option(eeprom_settings.coordinates_text, color_names, row, false, true);
}
else
Modify_Option(eeprom_settings.coordinates_text, color_names, Custom_Colors);
break;
case COLORSETTINGS_PROGRESS_COORDINATES_LINE:
if (draw) {
Draw_Menu_Item(row, ICON_MaxSpeed, F("Coordinates Line"));
Draw_Option(eeprom_settings.coordinates_split_line, color_names, row, false, true);
}
else
Modify_Option(eeprom_settings.coordinates_split_line, color_names, Custom_Colors);
break;
} // switch (item)
break;
case Advanced:
#define ADVANCED_BACK 0
#define ADVANCED_BEEPER (ADVANCED_BACK + ENABLED(SOUND_MENU_ITEM))
#define ADVANCED_PROBE (ADVANCED_BEEPER + ENABLED(HAS_BED_PROBE))
#define ADVANCED_CORNER (ADVANCED_PROBE + 1)
#define ADVANCED_LA (ADVANCED_CORNER + ENABLED(LIN_ADVANCE))
#define ADVANCED_LOAD (ADVANCED_LA + ENABLED(ADVANCED_PAUSE_FEATURE))
#define ADVANCED_UNLOAD (ADVANCED_LOAD + ENABLED(ADVANCED_PAUSE_FEATURE))
#define ADVANCED_COLD_EXTRUDE (ADVANCED_UNLOAD + ENABLED(PREVENT_COLD_EXTRUSION))
#define ADVANCED_FILSENSORENABLED (ADVANCED_COLD_EXTRUDE + ENABLED(FILAMENT_RUNOUT_SENSOR))
#define ADVANCED_FILSENSORDISTANCE (ADVANCED_FILSENSORENABLED + ENABLED(HAS_FILAMENT_RUNOUT_DISTANCE))
#define ADVANCED_POWER_LOSS (ADVANCED_FILSENSORDISTANCE + ENABLED(POWER_LOSS_RECOVERY))
#define ADVANCED_TOTAL ADVANCED_POWER_LOSS
switch (item) {
case ADVANCED_BACK:
if (draw)
Draw_Menu_Item(row, ICON_Back, F("Back"));
else
Draw_Menu(Control, CONTROL_ADVANCED);
break;
#if ENABLED(SOUND_MENU_ITEM)
case ADVANCED_BEEPER:
if (draw) {
Draw_Menu_Item(row, ICON_Version, F("LCD Beeper"));
Draw_Checkbox(row, ui.sound_on);
}
else {
ui.sound_on = !ui.sound_on;
Draw_Checkbox(row, ui.sound_on);
}
break;
#endif
#if HAS_BED_PROBE
case ADVANCED_PROBE:
if (draw)
Draw_Menu_Item(row, ICON_StepX, F("Probe"), nullptr, true);
else
Draw_Menu(ProbeMenu);
break;
#endif
case ADVANCED_CORNER:
if (draw) {
Draw_Menu_Item(row, ICON_MaxAccelerated, F("Bed Screw Inset"));
Draw_Float(corner_pos, row, false, 10);
}
else
Modify_Value(corner_pos, 1, 100, 10);
break;
#if ENABLED(LIN_ADVANCE)
case ADVANCED_LA:
if (draw) {
Draw_Menu_Item(row, ICON_MaxAccelerated, F("Lin Advance Kp"));
Draw_Float(planner.extruder_advance_K[0], row, false, 100);
}
else
Modify_Value(planner.extruder_advance_K[0], 0, 10, 100);
break;
#endif
#if ENABLED(ADVANCED_PAUSE_FEATURE)
case ADVANCED_LOAD:
if (draw) {
Draw_Menu_Item(row, ICON_WriteEEPROM, F("Load Length"));
Draw_Float(fc_settings[0].load_length, row, false, 1);
}
else
Modify_Value(fc_settings[0].load_length, 0, EXTRUDE_MAXLENGTH, 1);
break;
case ADVANCED_UNLOAD:
if (draw) {
Draw_Menu_Item(row, ICON_ReadEEPROM, F("Unload Length"));
Draw_Float(fc_settings[0].unload_length, row, false, 1);
}
else
Modify_Value(fc_settings[0].unload_length, 0, EXTRUDE_MAXLENGTH, 1);
break;
#endif // ADVANCED_PAUSE_FEATURE
#if ENABLED(PREVENT_COLD_EXTRUSION)
case ADVANCED_COLD_EXTRUDE:
if (draw) {
Draw_Menu_Item(row, ICON_Cool, F("Min Extrusion T"));
Draw_Float(thermalManager.extrude_min_temp, row, false, 1);
}
else {
Modify_Value(thermalManager.extrude_min_temp, 0, MAX_E_TEMP, 1);
thermalManager.allow_cold_extrude = (thermalManager.extrude_min_temp == 0);
}
break;
#endif
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
case ADVANCED_FILSENSORENABLED:
if (draw) {
Draw_Menu_Item(row, ICON_Extruder, F("Filament Sensor"));
Draw_Checkbox(row, runout.enabled);
}
else {
runout.enabled = !runout.enabled;
Draw_Checkbox(row, runout.enabled);
}
break;
#if ENABLED(HAS_FILAMENT_RUNOUT_DISTANCE)
case ADVANCED_FILSENSORDISTANCE:
if (draw) {
Draw_Menu_Item(row, ICON_MaxAccE, F("Runout Distance"));
Draw_Float(runout.runout_distance(), row, false, 10);
}
else
Modify_Value(runout.runout_distance(), 0, 999, 10);
break;
#endif
#endif // FILAMENT_RUNOUT_SENSOR
#if ENABLED(POWER_LOSS_RECOVERY)
case ADVANCED_POWER_LOSS:
if (draw) {
Draw_Menu_Item(row, ICON_Motion, F("Power-loss recovery"));
Draw_Checkbox(row, recovery.enabled);
}
else {
recovery.enable(!recovery.enabled);
Draw_Checkbox(row, recovery.enabled);
}
break;
#endif
}
break;
#if HAS_BED_PROBE
case ProbeMenu:
#define PROBE_BACK 0
#define PROBE_XOFFSET (PROBE_BACK + 1)
#define PROBE_YOFFSET (PROBE_XOFFSET + 1)
#define PROBE_TEST (PROBE_YOFFSET + 1)
#define PROBE_TEST_COUNT (PROBE_TEST + 1)
#define PROBE_TOTAL PROBE_TEST_COUNT
static uint8_t testcount = 4;
switch (item) {
case PROBE_BACK:
if (draw)
Draw_Menu_Item(row, ICON_Back, F("Back"));
else
Draw_Menu(Advanced, ADVANCED_PROBE);
break;
case PROBE_XOFFSET:
if (draw) {
Draw_Menu_Item(row, ICON_StepX, F("Probe X Offset"));
Draw_Float(probe.offset.x, row, false, 10);
}
else
Modify_Value(probe.offset.x, -MAX_XY_OFFSET, MAX_XY_OFFSET, 10);
break;
case PROBE_YOFFSET:
if (draw) {
Draw_Menu_Item(row, ICON_StepY, F("Probe Y Offset"));
Draw_Float(probe.offset.y, row, false, 10);
}
else
Modify_Value(probe.offset.y, -MAX_XY_OFFSET, MAX_XY_OFFSET, 10);
break;
case PROBE_TEST:
if (draw)
Draw_Menu_Item(row, ICON_StepY, F("M48 Probe Test"));
else {
sprintf_P(cmd, PSTR("G28O\nM48 X%s Y%s P%i"), dtostrf((X_BED_SIZE + X_MIN_POS) / 2.0f, 1, 3, str_1), dtostrf((Y_BED_SIZE + Y_MIN_POS) / 2.0f, 1, 3, str_2), testcount);
gcode.process_subcommands_now(cmd);
}
break;
case PROBE_TEST_COUNT:
if (draw) {
Draw_Menu_Item(row, ICON_StepY, F("Probe Test Count"));
Draw_Float(testcount, row, false, 1);
}
else
Modify_Value(testcount, 4, 50, 1);
break;
}
break;
#endif
case InfoMain:
case Info:
#define INFO_BACK 0
#define INFO_PRINTCOUNT (INFO_BACK + ENABLED(PRINTCOUNTER))
#define INFO_PRINTTIME (INFO_PRINTCOUNT + ENABLED(PRINTCOUNTER))
#define INFO_SIZE (INFO_PRINTTIME + 1)
#define INFO_VERSION (INFO_SIZE + 1)
#define INFO_CONTACT (INFO_VERSION + 1)
#define INFO_TOTAL INFO_BACK
switch (item) {
case INFO_BACK:
if (draw) {
Draw_Menu_Item(row, ICON_Back, F("Back"));
#if ENABLED(PRINTCOUNTER)
char row1[50], row2[50], buf[32];
printStatistics ps = print_job_timer.getStats();
sprintf_P(row1, PSTR("%i prints, %i finished"), ps.totalPrints, ps.finishedPrints);
sprintf_P(row2, PSTR("%s m filament used"), dtostrf(ps.filamentUsed / 1000, 1, 2, str_1));
Draw_Menu_Item(INFO_PRINTCOUNT, ICON_HotendTemp, row1, row2, false, true);
duration_t(print_job_timer.getStats().printTime).toString(buf);
sprintf_P(row1, PSTR("Printed: %s"), buf);
duration_t(print_job_timer.getStats().longestPrint).toString(buf);
sprintf_P(row2, PSTR("Longest: %s"), buf);
Draw_Menu_Item(INFO_PRINTTIME, ICON_PrintTime, row1, row2, false, true);
#endif
Draw_Menu_Item(INFO_SIZE, ICON_PrintSize, F(MACHINE_SIZE), nullptr, false, true);
Draw_Menu_Item(INFO_VERSION, ICON_Version, F(SHORT_BUILD_VERSION), nullptr, false, true);
Draw_Menu_Item(INFO_CONTACT, ICON_Contact, F(CORP_WEBSITE), nullptr, false, true);
}
else {
if (menu == Info)
Draw_Menu(Control, CONTROL_INFO);
else
Draw_Main_Menu(3);
}
break;
}
break;
#if HAS_MESH
case Leveling:
#define LEVELING_BACK 0
#define LEVELING_ACTIVE (LEVELING_BACK + 1)
#define LEVELING_GET_TILT (LEVELING_ACTIVE + BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_UBL))
#define LEVELING_GET_MESH (LEVELING_GET_TILT + 1)
#define LEVELING_MANUAL (LEVELING_GET_MESH + 1)
#define LEVELING_VIEW (LEVELING_MANUAL + 1)
#define LEVELING_SETTINGS (LEVELING_VIEW + 1)
#define LEVELING_SLOT (LEVELING_SETTINGS + ENABLED(AUTO_BED_LEVELING_UBL))
#define LEVELING_LOAD (LEVELING_SLOT + ENABLED(AUTO_BED_LEVELING_UBL))
#define LEVELING_SAVE (LEVELING_LOAD + ENABLED(AUTO_BED_LEVELING_UBL))
#define LEVELING_TOTAL LEVELING_SAVE
switch (item) {
case LEVELING_BACK:
if (draw)
Draw_Menu_Item(row, ICON_Back, F("Back"));
else
Draw_Main_Menu(3);
break;
case LEVELING_ACTIVE:
if (draw) {
Draw_Menu_Item(row, ICON_StockConfiguration, F("Leveling Active"));
Draw_Checkbox(row, planner.leveling_active);
}
else {
if (!planner.leveling_active) {
set_bed_leveling_enabled(!planner.leveling_active);
if (!planner.leveling_active) {
Confirm_Handler(LevelError);
break;
}
}
else
set_bed_leveling_enabled(!planner.leveling_active);
Draw_Checkbox(row, planner.leveling_active);
}
break;
#if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_UBL)
case LEVELING_GET_TILT:
if (draw)
Draw_Menu_Item(row, ICON_Tilt, F("Autotilt Current Mesh"));
else {
if (bedlevel.storage_slot < 0) {
Popup_Handler(MeshSlot);
break;
}
Popup_Handler(Home);
gcode.home_all_axes(true);
Popup_Handler(Level);
if (mesh_conf.tilt_grid > 1) {
sprintf_P(cmd, PSTR("G29 J%i"), mesh_conf.tilt_grid);
gcode.process_subcommands_now(cmd);
}
else
gcode.process_subcommands_now(F("G29 J"));
planner.synchronize();
Redraw_Menu();
}
break;
#endif
case LEVELING_GET_MESH:
if (draw)
Draw_Menu_Item(row, ICON_Mesh, F("Create New Mesh"));
else {
Popup_Handler(Home);
gcode.home_all_axes(true);
#if ENABLED(AUTO_BED_LEVELING_UBL)
#if ENABLED(PREHEAT_BEFORE_LEVELING)
Popup_Handler(Heating);
probe.preheat_for_probing(LEVELING_NOZZLE_TEMP, LEVELING_BED_TEMP);
#endif
#if HAS_BED_PROBE
Popup_Handler(Level);
gcode.process_subcommands_now(F("G29 P0\nG29 P1"));
gcode.process_subcommands_now(F("G29 P3\nG29 P3\nG29 P3\nG29 P3\nG29 P3\nG29 P3\nG29 P3\nG29 P3\nG29 P3\nG29 P3\nG29 P3\nG29 P3\nG29 P3\nG29 P3\nG29 P3\nM420 S1"));
planner.synchronize();
Update_Status("Probed all reachable points");
Popup_Handler(SaveLevel);
#else
level_state = planner.leveling_active;
set_bed_leveling_enabled(false);
mesh_conf.goto_mesh_value = true;
mesh_conf.mesh_x = mesh_conf.mesh_y = 0;
Popup_Handler(MoveWait);
mesh_conf.manual_mesh_move();
Draw_Menu(UBLMesh);
#endif
#elif HAS_BED_PROBE
Popup_Handler(Level);
gcode.process_subcommands_now(F("G29"));
planner.synchronize();
Popup_Handler(SaveLevel);
#else
level_state = planner.leveling_active;
set_bed_leveling_enabled(false);
gridpoint = 1;
Popup_Handler(MoveWait);
gcode.process_subcommands_now(F("G29"));
planner.synchronize();
Draw_Menu(ManualMesh);
#endif
}
break;
case LEVELING_MANUAL:
if (draw)
Draw_Menu_Item(row, ICON_Mesh, F("Manual Tuning"), nullptr, true);
else {
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
if (!leveling_is_valid()) {
Confirm_Handler(InvalidMesh);
break;
}
#endif
#if ENABLED(AUTO_BED_LEVELING_UBL)
if (bedlevel.storage_slot < 0) {
Popup_Handler(MeshSlot);
break;
}
#endif
if (axes_should_home()) {
Popup_Handler(Home);
gcode.home_all_axes(true);
}
level_state = planner.leveling_active;
set_bed_leveling_enabled(false);
mesh_conf.goto_mesh_value = false;
#if ENABLED(PREHEAT_BEFORE_LEVELING)
Popup_Handler(Heating);
#if HAS_HOTEND
if (thermalManager.degTargetHotend(0) < LEVELING_NOZZLE_TEMP)
thermalManager.setTargetHotend(LEVELING_NOZZLE_TEMP, 0);
#endif
#if HAS_HEATED_BED
if (thermalManager.degTargetBed() < LEVELING_BED_TEMP)
thermalManager.setTargetBed(LEVELING_BED_TEMP);
#endif
TERN_(HAS_HOTEND, thermalManager.wait_for_hotend(0));
TERN_(HAS_HEATED_BED, thermalManager.wait_for_bed_heating());
#endif
Popup_Handler(MoveWait);
mesh_conf.manual_mesh_move();
Draw_Menu(LevelManual);
}
break;
case LEVELING_VIEW:
if (draw)
Draw_Menu_Item(row, ICON_Mesh, GET_TEXT_F(MSG_MESH_VIEW), nullptr, true);
else {
#if ENABLED(AUTO_BED_LEVELING_UBL)
if (bedlevel.storage_slot < 0) {
Popup_Handler(MeshSlot);
break;
}
#endif
Draw_Menu(LevelView);
}
break;
case LEVELING_SETTINGS:
if (draw)
Draw_Menu_Item(row, ICON_Step, F("Leveling Settings"), nullptr, true);
else
Draw_Menu(LevelSettings);
break;
#if ENABLED(AUTO_BED_LEVELING_UBL)
case LEVELING_SLOT:
if (draw) {
Draw_Menu_Item(row, ICON_PrintSize, F("Mesh Slot"));
Draw_Float(bedlevel.storage_slot, row, false, 1);
}
else
Modify_Value(bedlevel.storage_slot, 0, settings.calc_num_meshes() - 1, 1);
break;
case LEVELING_LOAD:
if (draw)
Draw_Menu_Item(row, ICON_ReadEEPROM, F("Load Mesh"));
else {
if (bedlevel.storage_slot < 0) {
Popup_Handler(MeshSlot);
break;
}
gcode.process_subcommands_now(F("G29 L"));
planner.synchronize();
AudioFeedback(true);
}
break;
case LEVELING_SAVE:
if (draw)
Draw_Menu_Item(row, ICON_WriteEEPROM, F("Save Mesh"));
else {
if (bedlevel.storage_slot < 0) {
Popup_Handler(MeshSlot);
break;
}
gcode.process_subcommands_now(F("G29 S"));
planner.synchronize();
AudioFeedback(true);
}
break;
#endif
}
break;
case LevelView:
#define LEVELING_VIEW_BACK 0
#define LEVELING_VIEW_MESH (LEVELING_VIEW_BACK + 1)
#define LEVELING_VIEW_TEXT (LEVELING_VIEW_MESH + 1)
#define LEVELING_VIEW_ASYMMETRIC (LEVELING_VIEW_TEXT + 1)
#define LEVELING_VIEW_TOTAL LEVELING_VIEW_ASYMMETRIC
switch (item) {
case LEVELING_VIEW_BACK:
if (draw)
Draw_Menu_Item(row, ICON_Back, F("Back"));
else
Draw_Menu(Leveling, LEVELING_VIEW);
break;
case LEVELING_VIEW_MESH:
if (draw)
Draw_Menu_Item(row, ICON_PrintSize, GET_TEXT_F(MSG_MESH_VIEW), nullptr, true);
else
Draw_Menu(MeshViewer);
break;
case LEVELING_VIEW_TEXT:
if (draw) {
Draw_Menu_Item(row, ICON_Contact, F("Viewer Show Values"));
Draw_Checkbox(row, mesh_conf.viewer_print_value);
}
else {
mesh_conf.viewer_print_value = !mesh_conf.viewer_print_value;
Draw_Checkbox(row, mesh_conf.viewer_print_value);
}
break;
case LEVELING_VIEW_ASYMMETRIC:
if (draw) {
Draw_Menu_Item(row, ICON_Axis, F("Viewer Asymmetric"));
Draw_Checkbox(row, mesh_conf.viewer_asymmetric_range);
}
else {
mesh_conf.viewer_asymmetric_range = !mesh_conf.viewer_asymmetric_range;
Draw_Checkbox(row, mesh_conf.viewer_asymmetric_range);
}
break;
}
break;
case LevelSettings:
#define LEVELING_SETTINGS_BACK 0
#define LEVELING_SETTINGS_FADE (LEVELING_SETTINGS_BACK + 1)
#define LEVELING_SETTINGS_TILT (LEVELING_SETTINGS_FADE + ENABLED(AUTO_BED_LEVELING_UBL))
#define LEVELING_SETTINGS_PLANE (LEVELING_SETTINGS_TILT + ENABLED(AUTO_BED_LEVELING_UBL))
#define LEVELING_SETTINGS_ZERO (LEVELING_SETTINGS_PLANE + ENABLED(AUTO_BED_LEVELING_UBL))
#define LEVELING_SETTINGS_UNDEF (LEVELING_SETTINGS_ZERO + ENABLED(AUTO_BED_LEVELING_UBL))
#define LEVELING_SETTINGS_TOTAL LEVELING_SETTINGS_UNDEF
switch (item) {
case LEVELING_SETTINGS_BACK:
if (draw)
Draw_Menu_Item(row, ICON_Back, F("Back"));
else
Draw_Menu(Leveling, LEVELING_SETTINGS);
break;
case LEVELING_SETTINGS_FADE:
if (draw) {
Draw_Menu_Item(row, ICON_Fade, F("Fade Mesh within"));
Draw_Float(planner.z_fade_height, row, false, 1);
}
else {
Modify_Value(planner.z_fade_height, 0, Z_MAX_POS, 1);
planner.z_fade_height = -1;
set_z_fade_height(planner.z_fade_height);
}
break;
#if ENABLED(AUTO_BED_LEVELING_UBL)
case LEVELING_SETTINGS_TILT:
if (draw) {
Draw_Menu_Item(row, ICON_Tilt, F("Tilting Grid Size"));
Draw_Float(mesh_conf.tilt_grid, row, false, 1);
}
else
Modify_Value(mesh_conf.tilt_grid, 1, 8, 1);
break;
case LEVELING_SETTINGS_PLANE:
if (draw)
Draw_Menu_Item(row, ICON_ResumeEEPROM, F("Convert Mesh to Plane"));
else {
if (mesh_conf.create_plane_from_mesh()) break;
gcode.process_subcommands_now(F("M420 S1"));
planner.synchronize();
AudioFeedback(true);
}
break;
case LEVELING_SETTINGS_ZERO:
if (draw)
Draw_Menu_Item(row, ICON_Mesh, F("Zero Current Mesh"));
else
ZERO(bedlevel.z_values);
break;
case LEVELING_SETTINGS_UNDEF:
if (draw)
Draw_Menu_Item(row, ICON_Mesh, F("Clear Current Mesh"));
else
bedlevel.invalidate();
break;
#endif // AUTO_BED_LEVELING_UBL
}
break;
case MeshViewer:
#define MESHVIEW_BACK 0
#define MESHVIEW_TOTAL MESHVIEW_BACK
if (item == MESHVIEW_BACK) {
if (draw) {
Draw_Menu_Item(0, ICON_Back, F("Back"));
mesh_conf.Draw_Bed_Mesh();
mesh_conf.Set_Mesh_Viewer_Status();
}
else if (!mesh_conf.drawing_mesh) {
Draw_Menu(LevelView, LEVELING_VIEW_MESH);
Update_Status("");
}
}
break;
case LevelManual:
#define LEVELING_M_BACK 0
#define LEVELING_M_X (LEVELING_M_BACK + 1)
#define LEVELING_M_Y (LEVELING_M_X + 1)
#define LEVELING_M_NEXT (LEVELING_M_Y + 1)
#define LEVELING_M_OFFSET (LEVELING_M_NEXT + 1)
#define LEVELING_M_UP (LEVELING_M_OFFSET + 1)
#define LEVELING_M_DOWN (LEVELING_M_UP + 1)
#define LEVELING_M_GOTO_VALUE (LEVELING_M_DOWN + 1)
#define LEVELING_M_UNDEF (LEVELING_M_GOTO_VALUE + ENABLED(AUTO_BED_LEVELING_UBL))
#define LEVELING_M_TOTAL LEVELING_M_UNDEF
switch (item) {
case LEVELING_M_BACK:
if (draw)
Draw_Menu_Item(row, ICON_Back, F("Back"));
else {
set_bed_leveling_enabled(level_state);
TERN_(AUTO_BED_LEVELING_BILINEAR, bedlevel.refresh_bed_level());
Draw_Menu(Leveling, LEVELING_MANUAL);
}
break;
case LEVELING_M_X:
if (draw) {
Draw_Menu_Item(row, ICON_MoveX, F("Mesh Point X"));
Draw_Float(mesh_conf.mesh_x, row, 0, 1);
}
else
Modify_Value(mesh_conf.mesh_x, 0, GRID_MAX_POINTS_X - 1, 1);
break;
case LEVELING_M_Y:
if (draw) {
Draw_Menu_Item(row, ICON_MoveY, F("Mesh Point Y"));
Draw_Float(mesh_conf.mesh_y, row, 0, 1);
}
else
Modify_Value(mesh_conf.mesh_y, 0, GRID_MAX_POINTS_Y - 1, 1);
break;
case LEVELING_M_NEXT:
if (draw)
Draw_Menu_Item(row, ICON_More, F("Next Point"));
else {
if (mesh_conf.mesh_x != (GRID_MAX_POINTS_X - 1) || mesh_conf.mesh_y != (GRID_MAX_POINTS_Y - 1)) {
if ((mesh_conf.mesh_x == (GRID_MAX_POINTS_X - 1) && mesh_conf.mesh_y % 2 == 0) || (mesh_conf.mesh_x == 0 && mesh_conf.mesh_y % 2 == 1))
mesh_conf.mesh_y++;
else if (mesh_conf.mesh_y % 2 == 0)
mesh_conf.mesh_x++;
else
mesh_conf.mesh_x--;
mesh_conf.manual_mesh_move();
}
}
break;
case LEVELING_M_OFFSET:
if (draw) {
Draw_Menu_Item(row, ICON_SetZOffset, F("Point Z Offset"));
Draw_Float(bedlevel.z_values[mesh_conf.mesh_x][mesh_conf.mesh_y], row, false, 100);
}
else {
if (isnan(bedlevel.z_values[mesh_conf.mesh_x][mesh_conf.mesh_y]))
bedlevel.z_values[mesh_conf.mesh_x][mesh_conf.mesh_y] = 0;
Modify_Value(bedlevel.z_values[mesh_conf.mesh_x][mesh_conf.mesh_y], MIN_Z_OFFSET, MAX_Z_OFFSET, 100);
}
break;
case LEVELING_M_UP:
if (draw)
Draw_Menu_Item(row, ICON_Axis, F("Microstep Up"));
else if (bedlevel.z_values[mesh_conf.mesh_x][mesh_conf.mesh_y] < MAX_Z_OFFSET) {
bedlevel.z_values[mesh_conf.mesh_x][mesh_conf.mesh_y] += 0.01;
gcode.process_subcommands_now(F("M290 Z0.01"));
planner.synchronize();
current_position.z += 0.01f;
sync_plan_position();
Draw_Float(bedlevel.z_values[mesh_conf.mesh_x][mesh_conf.mesh_y], row - 1, false, 100);
}
break;
case LEVELING_M_DOWN:
if (draw)
Draw_Menu_Item(row, ICON_AxisD, F("Microstep Down"));
else if (bedlevel.z_values[mesh_conf.mesh_x][mesh_conf.mesh_y] > MIN_Z_OFFSET) {
bedlevel.z_values[mesh_conf.mesh_x][mesh_conf.mesh_y] -= 0.01;
gcode.process_subcommands_now(F("M290 Z-0.01"));
planner.synchronize();
current_position.z -= 0.01f;
sync_plan_position();
Draw_Float(bedlevel.z_values[mesh_conf.mesh_x][mesh_conf.mesh_y], row - 2, false, 100);
}
break;
case LEVELING_M_GOTO_VALUE:
if (draw) {
Draw_Menu_Item(row, ICON_StockConfiguration, F("Go to Mesh Z Value"));
Draw_Checkbox(row, mesh_conf.goto_mesh_value);
}
else {
mesh_conf.goto_mesh_value = !mesh_conf.goto_mesh_value;
current_position.z = 0;
mesh_conf.manual_mesh_move(true);
Draw_Checkbox(row, mesh_conf.goto_mesh_value);
}
break;
#if ENABLED(AUTO_BED_LEVELING_UBL)
case LEVELING_M_UNDEF:
if (draw)
Draw_Menu_Item(row, ICON_ResumeEEPROM, F("Clear Point Value"));
else {
mesh_conf.manual_value_update(true);
Redraw_Menu(false);
}
break;
#endif
}
break;
#endif // HAS_MESH
#if ENABLED(AUTO_BED_LEVELING_UBL) && !HAS_BED_PROBE
case UBLMesh:
#define UBL_M_BACK 0
#define UBL_M_NEXT (UBL_M_BACK + 1)
#define UBL_M_PREV (UBL_M_NEXT + 1)
#define UBL_M_OFFSET (UBL_M_PREV + 1)
#define UBL_M_UP (UBL_M_OFFSET + 1)
#define UBL_M_DOWN (UBL_M_UP + 1)
#define UBL_M_TOTAL UBL_M_DOWN
switch (item) {
case UBL_M_BACK:
if (draw)
Draw_Menu_Item(row, ICON_Back, F("Back"));
else {
set_bed_leveling_enabled(level_state);
Draw_Menu(Leveling, LEVELING_GET_MESH);
}
break;
case UBL_M_NEXT:
if (draw) {
if (mesh_conf.mesh_x != (GRID_MAX_POINTS_X - 1) || mesh_conf.mesh_y != (GRID_MAX_POINTS_Y - 1))
Draw_Menu_Item(row, ICON_More, F("Next Point"));
else
Draw_Menu_Item(row, ICON_More, F("Save Mesh"));
}
else {
if (mesh_conf.mesh_x != (GRID_MAX_POINTS_X - 1) || mesh_conf.mesh_y != (GRID_MAX_POINTS_Y - 1)) {
if ((mesh_conf.mesh_x == (GRID_MAX_POINTS_X - 1) && mesh_conf.mesh_y % 2 == 0) || (mesh_conf.mesh_x == 0 && mesh_conf.mesh_y % 2 == 1))
mesh_conf.mesh_y++;
else if (mesh_conf.mesh_y % 2 == 0)
mesh_conf.mesh_x++;
else
mesh_conf.mesh_x--;
mesh_conf.manual_mesh_move();
}
else {
gcode.process_subcommands_now(F("G29 S"));
planner.synchronize();
AudioFeedback(true);
Draw_Menu(Leveling, LEVELING_GET_MESH);
}
}
break;
case UBL_M_PREV:
if (draw)
Draw_Menu_Item(row, ICON_More, F("Previous Point"));
else {
if (mesh_conf.mesh_x != 0 || mesh_conf.mesh_y != 0) {
if ((mesh_conf.mesh_x == (GRID_MAX_POINTS_X - 1) && mesh_conf.mesh_y % 2 == 1) || (mesh_conf.mesh_x == 0 && mesh_conf.mesh_y % 2 == 0))
mesh_conf.mesh_y--;
else if (mesh_conf.mesh_y % 2 == 0)
mesh_conf.mesh_x--;
else
mesh_conf.mesh_x++;
mesh_conf.manual_mesh_move();
}
}
break;
case UBL_M_OFFSET:
if (draw) {
Draw_Menu_Item(row, ICON_SetZOffset, F("Point Z Offset"));
Draw_Float(bedlevel.z_values[mesh_conf.mesh_x][mesh_conf.mesh_y], row, false, 100);
}
else {
if (isnan(bedlevel.z_values[mesh_conf.mesh_x][mesh_conf.mesh_y]))
bedlevel.z_values[mesh_conf.mesh_x][mesh_conf.mesh_y] = 0;
Modify_Value(bedlevel.z_values[mesh_conf.mesh_x][mesh_conf.mesh_y], MIN_Z_OFFSET, MAX_Z_OFFSET, 100);
}
break;
case UBL_M_UP:
if (draw)
Draw_Menu_Item(row, ICON_Axis, F("Microstep Up"));
else if (bedlevel.z_values[mesh_conf.mesh_x][mesh_conf.mesh_y] < MAX_Z_OFFSET) {
bedlevel.z_values[mesh_conf.mesh_x][mesh_conf.mesh_y] += 0.01;
gcode.process_subcommands_now(F("M290 Z0.01"));
planner.synchronize();
current_position.z += 0.01f;
sync_plan_position();
Draw_Float(bedlevel.z_values[mesh_conf.mesh_x][mesh_conf.mesh_y], row - 1, false, 100);
}
break;
case UBL_M_DOWN:
if (draw)
Draw_Menu_Item(row, ICON_Axis, F("Microstep Down"));
else if (bedlevel.z_values[mesh_conf.mesh_x][mesh_conf.mesh_y] > MIN_Z_OFFSET) {
bedlevel.z_values[mesh_conf.mesh_x][mesh_conf.mesh_y] -= 0.01;
gcode.process_subcommands_now(F("M290 Z-0.01"));
planner.synchronize();
current_position.z -= 0.01f;
sync_plan_position();
Draw_Float(bedlevel.z_values[mesh_conf.mesh_x][mesh_conf.mesh_y], row - 2, false, 100);
}
break;
}
break;
#endif // AUTO_BED_LEVELING_UBL && !HAS_BED_PROBE
#if ENABLED(PROBE_MANUALLY)
case ManualMesh:
#define MMESH_BACK 0
#define MMESH_NEXT (MMESH_BACK + 1)
#define MMESH_OFFSET (MMESH_NEXT + 1)
#define MMESH_UP (MMESH_OFFSET + 1)
#define MMESH_DOWN (MMESH_UP + 1)
#define MMESH_OLD (MMESH_DOWN + 1)
#define MMESH_TOTAL MMESH_OLD
switch (item) {
case MMESH_BACK:
if (draw)
Draw_Menu_Item(row, ICON_Back, F("Cancel"));
else {
gcode.process_subcommands_now(F("G29 A"));
planner.synchronize();
set_bed_leveling_enabled(level_state);
Draw_Menu(Leveling, LEVELING_GET_MESH);
}
break;
case MMESH_NEXT:
if (draw) {
if (gridpoint < GRID_MAX_POINTS)
Draw_Menu_Item(row, ICON_More, F("Next Point"));
else
Draw_Menu_Item(row, ICON_More, F("Save Mesh"));
}
else if (gridpoint < GRID_MAX_POINTS) {
Popup_Handler(MoveWait);
gcode.process_subcommands_now(F("G29"));
planner.synchronize();
gridpoint++;
Redraw_Menu();
}
else {
gcode.process_subcommands_now(F("G29"));
planner.synchronize();
AudioFeedback(settings.save());
Draw_Menu(Leveling, LEVELING_GET_MESH);
}
break;
case MMESH_OFFSET:
if (draw) {
Draw_Menu_Item(row, ICON_SetZOffset, F("Z Position"));
current_position.z = MANUAL_PROBE_START_Z;
Draw_Float(current_position.z, row, false, 100);
}
else
Modify_Value(current_position.z, MIN_Z_OFFSET, MAX_Z_OFFSET, 100);
break;
case MMESH_UP:
if (draw)
Draw_Menu_Item(row, ICON_Axis, F("Microstep Up"));
else if (current_position.z < MAX_Z_OFFSET) {
gcode.process_subcommands_now(F("M290 Z0.01"));
planner.synchronize();
current_position.z += 0.01f;
sync_plan_position();
Draw_Float(current_position.z, row - 1, false, 100);
}
break;
case MMESH_DOWN:
if (draw)
Draw_Menu_Item(row, ICON_AxisD, F("Microstep Down"));
else if (current_position.z > MIN_Z_OFFSET) {
gcode.process_subcommands_now(F("M290 Z-0.01"));
planner.synchronize();
current_position.z -= 0.01f;
sync_plan_position();
Draw_Float(current_position.z, row - 2, false, 100);
}
break;
case MMESH_OLD:
uint8_t mesh_x, mesh_y;
// 0,0 -> 1,0 -> 2,0 -> 2,1 -> 1,1 -> 0,1 -> 0,2 -> 1,2 -> 2,2
mesh_y = (gridpoint - 1) / (GRID_MAX_POINTS_Y);
mesh_x = (gridpoint - 1) % (GRID_MAX_POINTS_X);
if (mesh_y % 2 == 1)
mesh_x = (GRID_MAX_POINTS_X) - mesh_x - 1;
const float currval = bedlevel.z_values[mesh_x][mesh_y];
if (draw) {
Draw_Menu_Item(row, ICON_Zoffset, F("Goto Mesh Value"));
Draw_Float(currval, row, false, 100);
}
else if (!isnan(currval)) {
current_position.z = currval;
planner.synchronize();
planner.buffer_line(current_position, homing_feedrate(Z_AXIS), active_extruder);
planner.synchronize();
Draw_Float(current_position.z, row - 3, false, 100);
}
break;
}
break;
#endif // PROBE_MANUALLY
case Tune:
#define TUNE_BACK 0
#define TUNE_SPEED (TUNE_BACK + 1)
#define TUNE_FLOW (TUNE_SPEED + ENABLED(HAS_HOTEND))
#define TUNE_HOTEND (TUNE_FLOW + ENABLED(HAS_HOTEND))
#define TUNE_BED (TUNE_HOTEND + ENABLED(HAS_HEATED_BED))
#define TUNE_FAN (TUNE_BED + ENABLED(HAS_FAN))
#define TUNE_ZOFFSET (TUNE_FAN + ENABLED(HAS_ZOFFSET_ITEM))
#define TUNE_ZUP (TUNE_ZOFFSET + ENABLED(HAS_ZOFFSET_ITEM))
#define TUNE_ZDOWN (TUNE_ZUP + ENABLED(HAS_ZOFFSET_ITEM))
#define TUNE_CHANGEFIL (TUNE_ZDOWN + ENABLED(FILAMENT_LOAD_UNLOAD_GCODES))
#define TUNE_FILSENSORENABLED (TUNE_CHANGEFIL + ENABLED(FILAMENT_RUNOUT_SENSOR))
#define TUNE_BACKLIGHT_OFF (TUNE_FILSENSORENABLED + 1)
#define TUNE_BACKLIGHT (TUNE_BACKLIGHT_OFF + 1)
#define TUNE_TOTAL TUNE_BACKLIGHT
switch (item) {
case TUNE_BACK:
if (draw)
Draw_Menu_Item(row, ICON_Back, F("Back"));
else
Draw_Print_Screen();
break;
case TUNE_SPEED:
if (draw) {
Draw_Menu_Item(row, ICON_Speed, F("Print Speed"));
Draw_Float(feedrate_percentage, row, false, 1);
}
else
Modify_Value(feedrate_percentage, MIN_PRINT_SPEED, MAX_PRINT_SPEED, 1);
break;
#if HAS_HOTEND
case TUNE_FLOW:
if (draw) {
Draw_Menu_Item(row, ICON_Speed, F("Flow Rate"));
Draw_Float(planner.flow_percentage[0], row, false, 1);
}
else
Modify_Value(planner.flow_percentage[0], MIN_FLOW_RATE, MAX_FLOW_RATE, 1);
break;
case TUNE_HOTEND:
if (draw) {
Draw_Menu_Item(row, ICON_SetEndTemp, F("Hotend"));
Draw_Float(thermalManager.temp_hotend[0].target, row, false, 1);
}
else
Modify_Value(thermalManager.temp_hotend[0].target, MIN_E_TEMP, MAX_E_TEMP, 1);
break;
#endif
#if HAS_HEATED_BED
case TUNE_BED:
if (draw) {
Draw_Menu_Item(row, ICON_SetBedTemp, F("Bed"));
Draw_Float(thermalManager.temp_bed.target, row, false, 1);
}
else
Modify_Value(thermalManager.temp_bed.target, MIN_BED_TEMP, MAX_BED_TEMP, 1);
break;
#endif
#if HAS_FAN
case TUNE_FAN:
if (draw) {
Draw_Menu_Item(row, ICON_FanSpeed, F("Fan"));
Draw_Float(thermalManager.fan_speed[0], row, false, 1);
}
else
Modify_Value(thermalManager.fan_speed[0], MIN_FAN_SPEED, MAX_FAN_SPEED, 1);
break;
#endif
#if HAS_ZOFFSET_ITEM
case TUNE_ZOFFSET:
if (draw) {
Draw_Menu_Item(row, ICON_FanSpeed, F("Z-Offset"));
Draw_Float(zoffsetvalue, row, false, 100);
}
else
Modify_Value(zoffsetvalue, MIN_Z_OFFSET, MAX_Z_OFFSET, 100);
break;
case TUNE_ZUP:
if (draw)
Draw_Menu_Item(row, ICON_Axis, F("Z-Offset Up"));
else if (zoffsetvalue < MAX_Z_OFFSET) {
gcode.process_subcommands_now(F("M290 Z0.01"));
zoffsetvalue += 0.01;
Draw_Float(zoffsetvalue, row - 1, false, 100);
}
break;
case TUNE_ZDOWN:
if (draw)
Draw_Menu_Item(row, ICON_AxisD, F("Z-Offset Down"));
else if (zoffsetvalue > MIN_Z_OFFSET) {
gcode.process_subcommands_now(F("M290 Z-0.01"));
zoffsetvalue -= 0.01;
Draw_Float(zoffsetvalue, row - 2, false, 100);
}
break;
#endif
#if ENABLED(FILAMENT_LOAD_UNLOAD_GCODES)
case TUNE_CHANGEFIL:
if (draw)
Draw_Menu_Item(row, ICON_ResumeEEPROM, F("Change Filament"));
else
Popup_Handler(ConfFilChange);
break;
#endif
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
case TUNE_FILSENSORENABLED:
if (draw) {
Draw_Menu_Item(row, ICON_Extruder, F("Filament Sensor"));
Draw_Checkbox(row, runout.enabled);
}
else {
runout.enabled = !runout.enabled;
Draw_Checkbox(row, runout.enabled);
}
break;
#endif
case TUNE_BACKLIGHT_OFF:
if (draw)
Draw_Menu_Item(row, ICON_Brightness, F("Display Off"));
else
ui.set_brightness(0);
break;
case TUNE_BACKLIGHT:
if (draw) {
Draw_Menu_Item(row, ICON_Brightness, F("LCD Brightness"));
Draw_Float(ui.brightness, row, false, 1);
}
else
Modify_Value(ui.brightness, LCD_BRIGHTNESS_MIN, LCD_BRIGHTNESS_MAX, 1, ui.refresh_brightness);
break;
}
break;
#if HAS_PREHEAT && HAS_HOTEND
case PreheatHotend:
#define PREHEATHOTEND_BACK 0
#define PREHEATHOTEND_CONTINUE (PREHEATHOTEND_BACK + 1)
#define PREHEATHOTEND_1 (PREHEATHOTEND_CONTINUE + (PREHEAT_COUNT >= 1))
#define PREHEATHOTEND_2 (PREHEATHOTEND_1 + (PREHEAT_COUNT >= 2))
#define PREHEATHOTEND_3 (PREHEATHOTEND_2 + (PREHEAT_COUNT >= 3))
#define PREHEATHOTEND_4 (PREHEATHOTEND_3 + (PREHEAT_COUNT >= 4))
#define PREHEATHOTEND_5 (PREHEATHOTEND_4 + (PREHEAT_COUNT >= 5))
#define PREHEATHOTEND_CUSTOM (PREHEATHOTEND_5 + 1)
#define PREHEATHOTEND_TOTAL PREHEATHOTEND_CUSTOM
switch (item) {
case PREHEATHOTEND_BACK:
if (draw)
Draw_Menu_Item(row, ICON_Back, F("Cancel"));
else {
thermalManager.setTargetHotend(0, 0);
thermalManager.set_fan_speed(0, 0);
Redraw_Menu(false, true, true);
}
break;
case PREHEATHOTEND_CONTINUE:
if (draw)
Draw_Menu_Item(row, ICON_SetEndTemp, F("Continue"));
else {
Popup_Handler(Heating);
thermalManager.wait_for_hotend(0);
switch (last_menu) {
case Prepare:
Popup_Handler(FilChange);
sprintf_P(cmd, PSTR("M600 B1 R%i"), thermalManager.temp_hotend[0].target);
gcode.process_subcommands_now(cmd);
break;
#if ENABLED(FILAMENT_LOAD_UNLOAD_GCODES)
case ChangeFilament:
switch (last_selection) {
case CHANGEFIL_LOAD:
Popup_Handler(FilLoad);
gcode.process_subcommands_now(F("M701"));
planner.synchronize();
Redraw_Menu(true, true, true);
break;
case CHANGEFIL_UNLOAD:
Popup_Handler(FilLoad, true);
gcode.process_subcommands_now(F("M702"));
planner.synchronize();
Redraw_Menu(true, true, true);
break;
case CHANGEFIL_CHANGE:
Popup_Handler(FilChange);
sprintf_P(cmd, PSTR("M600 B1 R%i"), thermalManager.temp_hotend[0].target);
gcode.process_subcommands_now(cmd);
break;
}
break;
#endif
default:
Redraw_Menu(true, true, true);
break;
}
}
break;
#define _PREHEAT_HOTEND_CASE(N) \
case PREHEATHOTEND_##N: \
if (draw) Draw_Menu_Item(row, ICON_Temperature, F(PREHEAT_## N ##_LABEL)); \
else ui.preheat_hotend_and_fan((N) - 1); \
break;
REPEAT_1(PREHEAT_COUNT, _PREHEAT_HOTEND_CASE)
case PREHEATHOTEND_CUSTOM:
if (draw) {
Draw_Menu_Item(row, ICON_Temperature, F("Custom"));
Draw_Float(thermalManager.temp_hotend[0].target, row, false, 1);
}
else
Modify_Value(thermalManager.temp_hotend[0].target, EXTRUDE_MINTEMP, MAX_E_TEMP, 1);
break;
}
break;
#endif // HAS_PREHEAT && HAS_HOTEND
}
}
FSTR_P CrealityDWINClass::Get_Menu_Title(uint8_t menu) {
switch (menu) {
case MainMenu: return F("Main Menu");
case Prepare: return F("Prepare");
case HomeMenu: return F("Homing Menu");
case Move: return F("Move");
case ManualLevel: return F("Manual Leveling");
#if HAS_ZOFFSET_ITEM
case ZOffset: return F("Z Offset");
#endif
#if HAS_PREHEAT
case Preheat: return F("Preheat");
#endif
#if ENABLED(FILAMENT_LOAD_UNLOAD_GCODES)
case ChangeFilament: return F("Change Filament");
#endif
#if HAS_CUSTOM_MENU
case MenuCustom:
#ifdef CUSTOM_MENU_CONFIG_TITLE
return F(CUSTOM_MENU_CONFIG_TITLE);
#else
return F("Custom Commands");
#endif
#endif
case Control: return F("Control");
case TempMenu: return F("Temperature");
#if HAS_HOTEND || HAS_HEATED_BED
case PID: return F("PID Menu");
#endif
#if HAS_HOTEND
case HotendPID: return F("Hotend PID Settings");
#endif
#if HAS_HEATED_BED
case BedPID: return F("Bed PID Settings");
#endif
#if HAS_PREHEAT
#define _PREHEAT_TITLE_CASE(N) case Preheat##N: return F(PREHEAT_## N ##_LABEL " Settings");
REPEAT_1(PREHEAT_COUNT, _PREHEAT_TITLE_CASE)
#endif
case Motion: return F("Motion Settings");
case HomeOffsets: return F("Home Offsets");
case MaxSpeed: return F("Max Speed");
case MaxAcceleration: return F("Max Acceleration");
#if HAS_CLASSIC_JERK
case MaxJerk: return F("Max Jerk");
#endif
case Steps: return F("Steps/mm");
case Visual: return F("Visual Settings");
case Advanced: return F("Advanced Settings");
#if HAS_BED_PROBE
case ProbeMenu: return F("Probe Menu");
#endif
case ColorSettings: return F("UI Color Settings");
case Info: return F("Info");
case InfoMain: return F("Info");
#if HAS_MESH
case Leveling: return F("Leveling");
case LevelView: return GET_TEXT_F(MSG_MESH_VIEW);
case LevelSettings: return F("Leveling Settings");
case MeshViewer: return GET_TEXT_F(MSG_MESH_VIEW);
case LevelManual: return F("Manual Tuning");
#endif
#if ENABLED(AUTO_BED_LEVELING_UBL) && !HAS_BED_PROBE
case UBLMesh: return F("UBL Bed Leveling");
#endif
#if ENABLED(PROBE_MANUALLY)
case ManualMesh: return F("Mesh Bed Leveling");
#endif
case Tune: return F("Tune");
case PreheatHotend: return F("Preheat Hotend");
}
return F("");
}
uint8_t CrealityDWINClass::Get_Menu_Size(uint8_t menu) {
switch (menu) {
case Prepare: return PREPARE_TOTAL;
case HomeMenu: return HOME_TOTAL;
case Move: return MOVE_TOTAL;
case ManualLevel: return MLEVEL_TOTAL;
#if HAS_ZOFFSET_ITEM
case ZOffset: return ZOFFSET_TOTAL;
#endif
#if HAS_PREHEAT
case Preheat: return PREHEAT_TOTAL;
#endif
#if ENABLED(FILAMENT_LOAD_UNLOAD_GCODES)
case ChangeFilament: return CHANGEFIL_TOTAL;
#endif
#if HAS_CUSTOM_MENU
case MenuCustom: return CUSTOM_MENU_TOTAL;
#endif
case Control: return CONTROL_TOTAL;
case TempMenu: return TEMP_TOTAL;
#if HAS_HOTEND || HAS_HEATED_BED
case PID: return PID_TOTAL;
#endif
#if HAS_HOTEND
case HotendPID: return HOTENDPID_TOTAL;
#endif
#if HAS_HEATED_BED
case BedPID: return BEDPID_TOTAL;
#endif
#if HAS_PREHEAT
case Preheat1 ... CAT(Preheat, PREHEAT_COUNT):
return PREHEAT_SUBMENU_TOTAL;
#endif
case Motion: return MOTION_TOTAL;
case HomeOffsets: return HOMEOFFSETS_TOTAL;
case MaxSpeed: return SPEED_TOTAL;
case MaxAcceleration: return ACCEL_TOTAL;
#if HAS_CLASSIC_JERK
case MaxJerk: return JERK_TOTAL;
#endif
case Steps: return STEPS_TOTAL;
case Visual: return VISUAL_TOTAL;
case Advanced: return ADVANCED_TOTAL;
#if HAS_BED_PROBE
case ProbeMenu: return PROBE_TOTAL;
#endif
case Info: return INFO_TOTAL;
case InfoMain: return INFO_TOTAL;
#if ENABLED(AUTO_BED_LEVELING_UBL) && !HAS_BED_PROBE
case UBLMesh: return UBL_M_TOTAL;
#endif
#if ENABLED(PROBE_MANUALLY)
case ManualMesh: return MMESH_TOTAL;
#endif
#if HAS_MESH
case Leveling: return LEVELING_TOTAL;
case LevelView: return LEVELING_VIEW_TOTAL;
case LevelSettings: return LEVELING_SETTINGS_TOTAL;
case MeshViewer: return MESHVIEW_TOTAL;
case LevelManual: return LEVELING_M_TOTAL;
#endif
case Tune: return TUNE_TOTAL;
#if HAS_PREHEAT && HAS_HOTEND
case PreheatHotend: return PREHEATHOTEND_TOTAL;
#endif
case ColorSettings: return COLORSETTINGS_TOTAL;
}
return 0;
}
/* Popup Config */
void CrealityDWINClass::Popup_Handler(PopupID popupid, bool option/*=false*/) {
popup = last_popup = popupid;
switch (popupid) {
case Pause: Draw_Popup(F("Pause Print"), F(""), F(""), Popup); break;
case Stop: Draw_Popup(F("Stop Print"), F(""), F(""), Popup); break;
case Resume: Draw_Popup(F("Resume Print?"), F("Looks Like the last"), F("print was interrupted."), Popup); break;
case ConfFilChange: Draw_Popup(F("Confirm Filament Change"), F(""), F(""), Popup); break;
case PurgeMore: Draw_Popup(F("Purge more filament?"), F("(Cancel to finish process)"), F(""), Popup); break;
case SaveLevel: Draw_Popup(F("Leveling Complete"), F("Save to EEPROM?"), F(""), Popup); break;
case MeshSlot: Draw_Popup(F("Mesh slot not selected"), F("(Confirm to select slot 0)"), F(""), Popup); break;
case ETemp: Draw_Popup(F("Nozzle is too cold"), F("Open Preheat Menu?"), F(""), Popup); break;
case ManualProbing: Draw_Popup(F("Manual Probing"), F("(Confirm to probe)"), F("(cancel to exit)"), Popup); break;
case Level: Draw_Popup(F("Auto Bed Leveling"), F("Please wait until done."), F(""), Wait, ICON_AutoLeveling); break;
case Home: Draw_Popup(option ? F("Parking") : F("Homing"), F("Please wait until done."), F(""), Wait, ICON_BLTouch); break;
case MoveWait: Draw_Popup(F("Moving to Point"), F("Please wait until done."), F(""), Wait, ICON_BLTouch); break;
case Heating: Draw_Popup(F("Heating"), F("Please wait until done."), F(""), Wait, ICON_BLTouch); break;
case FilLoad: Draw_Popup(option ? F("Unloading Filament") : F("Loading Filament"), F("Please wait until done."), F(""), Wait, ICON_BLTouch); break;
case FilChange: Draw_Popup(F("Filament Change"), F("Please wait for prompt."), F(""), Wait, ICON_BLTouch); break;
case TempWarn: Draw_Popup(option ? F("Nozzle temp too low!") : F("Nozzle temp too high!"), F(""), F(""), Wait, option ? ICON_TempTooLow : ICON_TempTooHigh); break;
case Runout: Draw_Popup(F("Filament Runout"), F(""), F(""), Wait, ICON_BLTouch); break;
case PIDWait: Draw_Popup(F("PID Autotune"), F("in process"), F("Please wait until done."), Wait, ICON_BLTouch); break;
case Resuming: Draw_Popup(F("Resuming Print"), F("Please wait until done."), F(""), Wait, ICON_BLTouch); break;
case Custom: Draw_Popup(F("Running Custom GCode"), F("Please wait until done."), F(""), Wait, ICON_BLTouch); break;
default: break;
}
}
void CrealityDWINClass::Confirm_Handler(PopupID popupid) {
popup = popupid;
switch (popupid) {
case FilInsert: Draw_Popup(F("Insert Filament"), F("Press to Continue"), F(""), Confirm); break;
case HeaterTime: Draw_Popup(F("Heater Timed Out"), F("Press to Reheat"), F(""), Confirm); break;
case UserInput: Draw_Popup(F("Waiting for Input"), F("Press to Continue"), F(""), Confirm); break;
case LevelError: Draw_Popup(F("Couldn't enable Leveling"), F("(Valid mesh must exist)"), F(""), Confirm); break;
case InvalidMesh: Draw_Popup(F("Valid mesh must exist"), F("before tuning can be"), F("performed"), Confirm); break;
default: break;
}
}
/* Navigation and Control */
void CrealityDWINClass::Main_Menu_Control() {
EncoderState encoder_diffState = Encoder_ReceiveAnalyze();
if (encoder_diffState == ENCODER_DIFF_NO) return;
if (encoder_diffState == ENCODER_DIFF_CW && selection < PAGE_COUNT - 1) {
selection++; // Select Down
Main_Menu_Icons();
}
else if (encoder_diffState == ENCODER_DIFF_CCW && selection > 0) {
selection--; // Select Up
Main_Menu_Icons();
}
else if (encoder_diffState == ENCODER_DIFF_ENTER)
switch (selection) {
case PAGE_PRINT: card.mount(); Draw_SD_List(); break;
case PAGE_PREPARE: Draw_Menu(Prepare); break;
case PAGE_CONTROL: Draw_Menu(Control); break;
case PAGE_INFO_LEVELING: Draw_Menu(TERN(HAS_MESH, Leveling, InfoMain)); break;
}
DWIN_UpdateLCD();
}
void CrealityDWINClass::Menu_Control() {
EncoderState encoder_diffState = Encoder_ReceiveAnalyze();
if (encoder_diffState == ENCODER_DIFF_NO) return;
if (encoder_diffState == ENCODER_DIFF_CW && selection < Get_Menu_Size(active_menu)) {
DWIN_Draw_Rectangle(1, Color_Bg_Black, 0, MBASE(selection - scrollpos) - 18, 14, MBASE(selection - scrollpos) + 33);
selection++; // Select Down
if (selection > scrollpos+MROWS) {
scrollpos++;
DWIN_Frame_AreaMove(1, 2, MLINE, Color_Bg_Black, 0, 31, DWIN_WIDTH, 349);
Menu_Item_Handler(active_menu, selection);
}
DWIN_Draw_Rectangle(1, GetColor(eeprom_settings.cursor_color, Rectangle_Color), 0, MBASE(selection - scrollpos) - 18, 14, MBASE(selection - scrollpos) + 33);
}
else if (encoder_diffState == ENCODER_DIFF_CCW && selection > 0) {
DWIN_Draw_Rectangle(1, Color_Bg_Black, 0, MBASE(selection - scrollpos) - 18, 14, MBASE(selection - scrollpos) + 33);
selection--; // Select Up
if (selection < scrollpos) {
scrollpos--;
DWIN_Frame_AreaMove(1, 3, MLINE, Color_Bg_Black, 0, 31, DWIN_WIDTH, 349);
Menu_Item_Handler(active_menu, selection);
}
DWIN_Draw_Rectangle(1, GetColor(eeprom_settings.cursor_color, Rectangle_Color), 0, MBASE(selection - scrollpos) - 18, 14, MBASE(selection - scrollpos) + 33);
}
else if (encoder_diffState == ENCODER_DIFF_ENTER)
Menu_Item_Handler(active_menu, selection, false);
DWIN_UpdateLCD();
}
void CrealityDWINClass::Value_Control() {
EncoderState encoder_diffState = Encoder_ReceiveAnalyze();
if (encoder_diffState == ENCODER_DIFF_NO) return;
if (encoder_diffState == ENCODER_DIFF_CW)
tempvalue += EncoderRate.encoderMoveValue;
else if (encoder_diffState == ENCODER_DIFF_CCW)
tempvalue -= EncoderRate.encoderMoveValue;
else if (encoder_diffState == ENCODER_DIFF_ENTER) {
process = Menu;
EncoderRate.enabled = false;
Draw_Float(tempvalue / valueunit, selection - scrollpos, false, valueunit);
DWIN_UpdateLCD();
if (active_menu == ZOffset && liveadjust) {
planner.synchronize();
current_position.z += (tempvalue / valueunit - zoffsetvalue);
planner.buffer_line(current_position, homing_feedrate(Z_AXIS), active_extruder);
current_position.z = 0;
sync_plan_position();
}
else if (active_menu == Tune && selection == TUNE_ZOFFSET) {
sprintf_P(cmd, PSTR("M290 Z%s"), dtostrf((tempvalue / valueunit - zoffsetvalue), 1, 3, str_1));
gcode.process_subcommands_now(cmd);
}
if (TERN0(HAS_HOTEND, valuepointer == &thermalManager.temp_hotend[0].pid.Ki) || TERN0(HAS_HEATED_BED, valuepointer == &thermalManager.temp_bed.pid.Ki))
tempvalue = scalePID_i(tempvalue);
if (TERN0(HAS_HOTEND, valuepointer == &thermalManager.temp_hotend[0].pid.Kd) || TERN0(HAS_HEATED_BED, valuepointer == &thermalManager.temp_bed.pid.Kd))
tempvalue = scalePID_d(tempvalue);
switch (valuetype) {
case 0: *(float*)valuepointer = tempvalue / valueunit; break;
case 1: *(uint8_t*)valuepointer = tempvalue / valueunit; break;
case 2: *(uint16_t*)valuepointer = tempvalue / valueunit; break;
case 3: *(int16_t*)valuepointer = tempvalue / valueunit; break;
case 4: *(uint32_t*)valuepointer = tempvalue / valueunit; break;
case 5: *(int8_t*)valuepointer = tempvalue / valueunit; break;
}
switch (active_menu) {
case Move:
planner.synchronize();
planner.buffer_line(current_position, manual_feedrate_mm_s[selection - 1], active_extruder);
break;
#if HAS_MESH
case ManualMesh:
planner.synchronize();
planner.buffer_line(current_position, homing_feedrate(Z_AXIS), active_extruder);
planner.synchronize();
break;
case UBLMesh: mesh_conf.manual_mesh_move(true); break;
case LevelManual: mesh_conf.manual_mesh_move(selection == LEVELING_M_OFFSET); break;
#endif
}
if (valuepointer == &planner.flow_percentage[0])
planner.refresh_e_factor(0);
if (funcpointer) funcpointer();
return;
}
NOLESS(tempvalue, (valuemin * valueunit));
NOMORE(tempvalue, (valuemax * valueunit));
Draw_Float(tempvalue / valueunit, selection - scrollpos, true, valueunit);
DWIN_UpdateLCD();
if (active_menu == Move && livemove) {
*(float*)valuepointer = tempvalue / valueunit;
planner.buffer_line(current_position, manual_feedrate_mm_s[selection - 1], active_extruder);
}
}
void CrealityDWINClass::Option_Control() {
EncoderState encoder_diffState = Encoder_ReceiveAnalyze();
if (encoder_diffState == ENCODER_DIFF_NO) return;
if (encoder_diffState == ENCODER_DIFF_CW)
tempvalue += EncoderRate.encoderMoveValue;
else if (encoder_diffState == ENCODER_DIFF_CCW)
tempvalue -= EncoderRate.encoderMoveValue;
else if (encoder_diffState == ENCODER_DIFF_ENTER) {
process = Menu;
EncoderRate.enabled = false;
if (valuepointer == &color_names) {
switch (selection) {
case COLORSETTINGS_CURSOR: eeprom_settings.cursor_color = tempvalue; break;
case COLORSETTINGS_SPLIT_LINE: eeprom_settings.menu_split_line = tempvalue; break;
case COLORSETTINGS_MENU_TOP_BG: eeprom_settings.menu_top_bg = tempvalue; break;
case COLORSETTINGS_MENU_TOP_TXT: eeprom_settings.menu_top_txt = tempvalue; break;
case COLORSETTINGS_HIGHLIGHT_BORDER: eeprom_settings.highlight_box = tempvalue; break;
case COLORSETTINGS_PROGRESS_PERCENT: eeprom_settings.progress_percent = tempvalue; break;
case COLORSETTINGS_PROGRESS_TIME: eeprom_settings.progress_time = tempvalue; break;
case COLORSETTINGS_PROGRESS_STATUS_BAR: eeprom_settings.status_bar_text = tempvalue; break;
case COLORSETTINGS_PROGRESS_STATUS_AREA: eeprom_settings.status_area_text = tempvalue; break;
case COLORSETTINGS_PROGRESS_COORDINATES: eeprom_settings.coordinates_text = tempvalue; break;
case COLORSETTINGS_PROGRESS_COORDINATES_LINE: eeprom_settings.coordinates_split_line = tempvalue; break;
}
Redraw_Screen();
}
else if (valuepointer == &preheat_modes)
preheatmode = tempvalue;
Draw_Option(tempvalue, static_cast(valuepointer), selection - scrollpos, false, (valuepointer == &color_names));
DWIN_UpdateLCD();
return;
}
NOLESS(tempvalue, valuemin);
NOMORE(tempvalue, valuemax);
Draw_Option(tempvalue, static_cast(valuepointer), selection - scrollpos, true);
DWIN_UpdateLCD();
}
void CrealityDWINClass::File_Control() {
typedef TextScroller Scroller;
static Scroller scroller;
EncoderState encoder_diffState = Encoder_ReceiveAnalyze();
if (encoder_diffState == ENCODER_DIFF_NO) {
if (selection > 0) {
card.getfilename_sorted(SD_ORDER(selection - 1, card.get_num_Files()));
char * const filename = card.longest_filename();
size_t len = strlen(filename);
size_t pos = len;
if (!card.flag.filenameIsDir)
while (pos && filename[pos] != '.') pos--;
if (pos > MENU_CHAR_LIMIT) {
static millis_t time = 0;
if (PENDING(millis(), time)) return;
time = millis() + 200;
Scroller::Buffer buf;
const char* const name = scroller.scroll(pos, buf, filename);
DWIN_Draw_Rectangle(1, Color_Bg_Black, LBLX, MBASE(selection - scrollpos) - 14, 271, MBASE(selection - scrollpos) + 28);
Draw_Menu_Item(selection - scrollpos, card.flag.filenameIsDir ? ICON_More : ICON_File, name);
DWIN_UpdateLCD();
}
}
return;
}
if (encoder_diffState == ENCODER_DIFF_CW && selection < card.get_num_Files()) {
DWIN_Draw_Rectangle(1, Color_Bg_Black, 0, MBASE(selection - scrollpos) - 18, 14, MBASE(selection - scrollpos) + 33);
if (selection > 0) {
DWIN_Draw_Rectangle(1, Color_Bg_Black, LBLX, MBASE(selection - scrollpos) - 14, 271, MBASE(selection - scrollpos) + 28);
Draw_SD_Item(selection, selection - scrollpos);
}
scroller.reset();
selection++; // Select Down
if (selection > scrollpos + MROWS) {
scrollpos++;
DWIN_Frame_AreaMove(1, 2, MLINE, Color_Bg_Black, 0, 31, DWIN_WIDTH, 349);
Draw_SD_Item(selection, selection - scrollpos);
}
DWIN_Draw_Rectangle(1, GetColor(eeprom_settings.cursor_color, Rectangle_Color), 0, MBASE(selection - scrollpos) - 18, 14, MBASE(selection - scrollpos) + 33);
}
else if (encoder_diffState == ENCODER_DIFF_CCW && selection > 0) {
DWIN_Draw_Rectangle(1, Color_Bg_Black, 0, MBASE(selection - scrollpos) - 18, 14, MBASE(selection - scrollpos) + 33);
DWIN_Draw_Rectangle(1, Color_Bg_Black, LBLX, MBASE(selection - scrollpos) - 14, 271, MBASE(selection - scrollpos) + 28);
Draw_SD_Item(selection, selection - scrollpos);
scroller.reset();
selection--; // Select Up
if (selection < scrollpos) {
scrollpos--;
DWIN_Frame_AreaMove(1, 3, MLINE, Color_Bg_Black, 0, 31, DWIN_WIDTH, 349);
Draw_SD_Item(selection, selection - scrollpos);
}
DWIN_Draw_Rectangle(1, GetColor(eeprom_settings.cursor_color, Rectangle_Color), 0, MBASE(selection - scrollpos) - 18, 14, MBASE(selection - scrollpos) + 33);
}
else if (encoder_diffState == ENCODER_DIFF_ENTER) {
if (selection == 0) {
if (card.flag.workDirIsRoot) {
process = Main;
Draw_Main_Menu();
}
else {
card.cdup();
Draw_SD_List();
}
}
else {
card.getfilename_sorted(SD_ORDER(selection - 1, card.get_num_Files()));
if (card.flag.filenameIsDir) {
card.cd(card.filename);
Draw_SD_List();
}
else {
card.openAndPrintFile(card.filename);
}
}
}
DWIN_UpdateLCD();
}
void CrealityDWINClass::Print_Screen_Control() {
EncoderState encoder_diffState = Encoder_ReceiveAnalyze();
if (encoder_diffState == ENCODER_DIFF_NO) return;
if (encoder_diffState == ENCODER_DIFF_CW && selection < PRINT_COUNT - 1) {
selection++; // Select Down
Print_Screen_Icons();
}
else if (encoder_diffState == ENCODER_DIFF_CCW && selection > 0) {
selection--; // Select Up
Print_Screen_Icons();
}
else if (encoder_diffState == ENCODER_DIFF_ENTER) {
switch (selection) {
case PRINT_SETUP:
Draw_Menu(Tune);
Update_Status_Bar(true);
break;
case PRINT_PAUSE_RESUME:
if (paused) {
if (sdprint) {
wait_for_user = false;
#if ENABLED(PARK_HEAD_ON_PAUSE)
card.startOrResumeFilePrinting();
TERN_(POWER_LOSS_RECOVERY, recovery.prepare());
#else
char cmd[20];
#if HAS_HEATED_BED
sprintf_P(cmd, PSTR("M140 S%i"), pausebed);
gcode.process_subcommands_now(cmd);
#endif
#if HAS_EXTRUDERS
sprintf_P(cmd, PSTR("M109 S%i"), pausetemp);
gcode.process_subcommands_now(cmd);
#endif
TERN_(HAS_FAN, thermalManager.fan_speed[0] = pausefan);
planner.synchronize();
TERN_(SDSUPPORT, queue.inject(F("M24")));
#endif
}
else {
TERN_(HOST_ACTION_COMMANDS, hostui.resume());
}
Draw_Print_Screen();
}
else
Popup_Handler(Pause);
break;
case PRINT_STOP: Popup_Handler(Stop); break;
}
}
DWIN_UpdateLCD();
}
void CrealityDWINClass::Popup_Control() {
EncoderState encoder_diffState = Encoder_ReceiveAnalyze();
if (encoder_diffState == ENCODER_DIFF_NO) return;
if (encoder_diffState == ENCODER_DIFF_CW && selection < 1) {
selection++;
Popup_Select();
}
else if (encoder_diffState == ENCODER_DIFF_CCW && selection > 0) {
selection--;
Popup_Select();
}
else if (encoder_diffState == ENCODER_DIFF_ENTER) {
switch (popup) {
case Pause:
if (selection == 0) {
if (sdprint) {
#if ENABLED(POWER_LOSS_RECOVERY)
if (recovery.enabled) recovery.save(true);
#endif
#if ENABLED(PARK_HEAD_ON_PAUSE)
Popup_Handler(Home, true);
#if ENABLED(SDSUPPORT)
if (IS_SD_PRINTING()) card.pauseSDPrint();
#endif
planner.synchronize();
queue.inject(F("M125"));
planner.synchronize();
#else
queue.inject(F("M25"));
TERN_(HAS_HOTEND, pausetemp = thermalManager.temp_hotend[0].target);
TERN_(HAS_HEATED_BED, pausebed = thermalManager.temp_bed.target);
TERN_(HAS_FAN, pausefan = thermalManager.fan_speed[0]);
thermalManager.cooldown();
#endif
}
else {
TERN_(HOST_ACTION_COMMANDS, hostui.pause());
}
}
Draw_Print_Screen();
break;
case Stop:
if (selection == 0) {
if (sdprint) {
ui.abort_print();
thermalManager.cooldown();
}
else {
TERN_(HOST_ACTION_COMMANDS, hostui.cancel());
}
}
else
Draw_Print_Screen();
break;
case Resume:
if (selection == 0)
queue.inject(F("M1000"));
else {
queue.inject(F("M1000 C"));
Draw_Main_Menu();
}
break;
#if HAS_HOTEND
case ETemp:
if (selection == 0) {
thermalManager.setTargetHotend(EXTRUDE_MINTEMP, 0);
thermalManager.set_fan_speed(0, MAX_FAN_SPEED);
Draw_Menu(PreheatHotend);
}
else
Redraw_Menu(true, true, false);
break;
#endif
#if HAS_BED_PROBE
case ManualProbing:
if (selection == 0) {
char buf[80];
const float dif = probe.probe_at_point(current_position.x, current_position.y, PROBE_PT_STOW, 0, false) - corner_avg;
sprintf_P(buf, dif > 0 ? PSTR("Corner is %smm high") : PSTR("Corner is %smm low"), dtostrf(abs(dif), 1, 3, str_1));
Update_Status(buf);
}
else {
Redraw_Menu(true, true, false);
Update_Status("");
}
break;
#endif
#if ENABLED(ADVANCED_PAUSE_FEATURE)
case ConfFilChange:
if (selection == 0) {
if (thermalManager.temp_hotend[0].target < thermalManager.extrude_min_temp)
Popup_Handler(ETemp);
else {
if (thermalManager.temp_hotend[0].is_below_target(-2)) {
Popup_Handler(Heating);
thermalManager.wait_for_hotend(0);
}
Popup_Handler(FilChange);
sprintf_P(cmd, PSTR("M600 B1 R%i"), thermalManager.temp_hotend[0].target);
gcode.process_subcommands_now(cmd);
}
}
else
Redraw_Menu(true, true, false);
break;
case PurgeMore:
if (selection == 0) {
pause_menu_response = PAUSE_RESPONSE_EXTRUDE_MORE;
Popup_Handler(FilChange);
}
else {
pause_menu_response = PAUSE_RESPONSE_RESUME_PRINT;
if (printing) Popup_Handler(Resuming);
else Redraw_Menu(true, true, (active_menu==PreheatHotend));
}
break;
#endif // ADVANCED_PAUSE_FEATURE
#if HAS_MESH
case SaveLevel:
if (selection == 0) {
#if ENABLED(AUTO_BED_LEVELING_UBL)
gcode.process_subcommands_now(F("G29 S"));
planner.synchronize();
AudioFeedback(true);
#else
AudioFeedback(settings.save());
#endif
}
Draw_Menu(Leveling, LEVELING_GET_MESH);
break;
#endif
#if ENABLED(AUTO_BED_LEVELING_UBL)
case MeshSlot:
if (selection == 0) bedlevel.storage_slot = 0;
Redraw_Menu(true, true);
break;
#endif
default: break;
}
}
DWIN_UpdateLCD();
}
void CrealityDWINClass::Confirm_Control() {
EncoderState encoder_diffState = Encoder_ReceiveAnalyze();
if (encoder_diffState == ENCODER_DIFF_NO) return;
if (encoder_diffState == ENCODER_DIFF_ENTER) {
switch (popup) {
case Complete:
Draw_Main_Menu();
break;
case FilInsert:
Popup_Handler(FilChange);
wait_for_user = false;
break;
case HeaterTime:
Popup_Handler(Heating);
wait_for_user = false;
break;
default:
Redraw_Menu(true, true, false);
wait_for_user = false;
break;
}
}
DWIN_UpdateLCD();
}
/* In-Menu Value Modification */
void CrealityDWINClass::Setup_Value(float value, float min, float max, float unit, uint8_t type) {
if (TERN0(HAS_HOTEND, valuepointer == &thermalManager.temp_hotend[0].pid.Ki) || TERN0(HAS_HEATED_BED, valuepointer == &thermalManager.temp_bed.pid.Ki))
tempvalue = unscalePID_i(value) * unit;
else if (TERN0(HAS_HOTEND, valuepointer == &thermalManager.temp_hotend[0].pid.Kd) || TERN0(HAS_HEATED_BED, valuepointer == &thermalManager.temp_bed.pid.Kd))
tempvalue = unscalePID_d(value) * unit;
else
tempvalue = value * unit;
valuemin = min;
valuemax = max;
valueunit = unit;
valuetype = type;
process = Value;
EncoderRate.enabled = true;
Draw_Float(tempvalue / unit, selection - scrollpos, true, valueunit);
}
void CrealityDWINClass::Modify_Value(float &value, float min, float max, float unit, void (*f)()/*=nullptr*/) {
valuepointer = &value;
funcpointer = f;
Setup_Value((float)value, min, max, unit, 0);
}
void CrealityDWINClass::Modify_Value(uint8_t &value, float min, float max, float unit, void (*f)()/*=nullptr*/) {
valuepointer = &value;
funcpointer = f;
Setup_Value((float)value, min, max, unit, 1);
}
void CrealityDWINClass::Modify_Value(uint16_t &value, float min, float max, float unit, void (*f)()/*=nullptr*/) {
valuepointer = &value;
funcpointer = f;
Setup_Value((float)value, min, max, unit, 2);
}
void CrealityDWINClass::Modify_Value(int16_t &value, float min, float max, float unit, void (*f)()/*=nullptr*/) {
valuepointer = &value;
funcpointer = f;
Setup_Value((float)value, min, max, unit, 3);
}
void CrealityDWINClass::Modify_Value(uint32_t &value, float min, float max, float unit, void (*f)()/*=nullptr*/) {
valuepointer = &value;
funcpointer = f;
Setup_Value((float)value, min, max, unit, 4);
}
void CrealityDWINClass::Modify_Value(int8_t &value, float min, float max, float unit, void (*f)()/*=nullptr*/) {
valuepointer = &value;
funcpointer = f;
Setup_Value((float)value, min, max, unit, 5);
}
void CrealityDWINClass::Modify_Option(uint8_t value, const char * const * options, uint8_t max) {
tempvalue = value;
valuepointer = const_cast(options);
valuemin = 0;
valuemax = max;
process = Option;
EncoderRate.enabled = true;
Draw_Option(value, options, selection - scrollpos, true);
}
/* Main Functions */
void CrealityDWINClass::Update_Status(const char * const text) {
if (strncmp_P(text, PSTR(""), 3) == 0) {
LOOP_L_N(i, _MIN((size_t)LONG_FILENAME_LENGTH, strlen(text))) filename[i] = text[i + 3];
filename[_MIN((size_t)LONG_FILENAME_LENGTH - 1, strlen(text))] = '\0';
Draw_Print_Filename(true);
}
else {
LOOP_L_N(i, _MIN((size_t)64, strlen(text))) statusmsg[i] = text[i];
statusmsg[_MIN((size_t)64, strlen(text))] = '\0';
}
}
void CrealityDWINClass::Start_Print(bool sd) {
sdprint = sd;
if (!printing) {
printing = true;
statusmsg[0] = '\0';
if (sd) {
#if ENABLED(POWER_LOSS_RECOVERY)
if (recovery.valid()) {
SdFile *diveDir = nullptr;
const char * const fname = card.diveToFile(true, diveDir, recovery.info.sd_filename);
card.selectFileByName(fname);
}
#endif
strcpy(filename, card.longest_filename());
}
else
strcpy_P(filename, PSTR("Host Print"));
TERN_(LCD_SET_PROGRESS_MANUALLY, ui.set_progress(0));
TERN_(USE_M73_REMAINING_TIME, ui.set_remaining_time(0));
Draw_Print_Screen();
}
}
void CrealityDWINClass::Stop_Print() {
printing = false;
sdprint = false;
thermalManager.cooldown();
TERN_(LCD_SET_PROGRESS_MANUALLY, ui.set_progress(100 * (PROGRESS_SCALE)));
TERN_(USE_M73_REMAINING_TIME, ui.set_remaining_time(0));
Draw_Print_confirm();
}
void CrealityDWINClass::Update() {
State_Update();
Screen_Update();
switch (process) {
case Main: Main_Menu_Control(); break;
case Menu: Menu_Control(); break;
case Value: Value_Control(); break;
case Option: Option_Control(); break;
case File: File_Control(); break;
case Print: Print_Screen_Control(); break;
case Popup: Popup_Control(); break;
case Confirm: Confirm_Control(); break;
}
}
void MarlinUI::update() { CrealityDWIN.Update(); }
#if HAS_LCD_BRIGHTNESS
void MarlinUI::_set_brightness() { DWIN_LCD_Brightness(backlight ? brightness : 0); }
#endif
void CrealityDWINClass::State_Update() {
if ((print_job_timer.isRunning() || print_job_timer.isPaused()) != printing) {
if (!printing) Start_Print(card.isFileOpen() || TERN0(POWER_LOSS_RECOVERY, recovery.valid()));
else Stop_Print();
}
if (print_job_timer.isPaused() != paused) {
paused = print_job_timer.isPaused();
if (process == Print) Print_Screen_Icons();
if (process == Wait && !paused) Redraw_Menu(true, true);
}
if (wait_for_user && !(process == Confirm) && !print_job_timer.isPaused())
Confirm_Handler(UserInput);
#if ENABLED(ADVANCED_PAUSE_FEATURE)
if (process == Popup && popup == PurgeMore) {
if (pause_menu_response == PAUSE_RESPONSE_EXTRUDE_MORE)
Popup_Handler(FilChange);
else if (pause_menu_response == PAUSE_RESPONSE_RESUME_PRINT) {
if (printing) Popup_Handler(Resuming);
else Redraw_Menu(true, true, (active_menu==PreheatHotend));
}
}
#endif
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
static bool ranout = false;
if (runout.filament_ran_out != ranout) {
ranout = runout.filament_ran_out;
if (ranout) Popup_Handler(Runout);
}
#endif
}
void CrealityDWINClass::Screen_Update() {
const millis_t ms = millis();
static millis_t scrltime = 0;
if (ELAPSED(ms, scrltime)) {
scrltime = ms + 200;
Update_Status_Bar();
if (process == Print) Draw_Print_Filename();
}
static millis_t statustime = 0;
if (ELAPSED(ms, statustime)) {
statustime = ms + 500;
Draw_Status_Area();
}
static millis_t printtime = 0;
if (ELAPSED(ms, printtime)) {
printtime = ms + 1000;
if (process == Print) {
Draw_Print_ProgressBar();
Draw_Print_ProgressElapsed();
TERN_(USE_M73_REMAINING_TIME, Draw_Print_ProgressRemain());
}
}
static bool mounted = card.isMounted();
if (mounted != card.isMounted()) {
mounted = card.isMounted();
if (process == File)
Draw_SD_List();
}
#if HAS_HOTEND
static int16_t hotendtarget = -1;
#endif
#if HAS_HEATED_BED
static int16_t bedtarget = -1;
#endif
#if HAS_FAN
static int16_t fanspeed = -1;
#endif
#if HAS_ZOFFSET_ITEM
static float lastzoffset = zoffsetvalue;
if (zoffsetvalue != lastzoffset) {
lastzoffset = zoffsetvalue;
#if HAS_BED_PROBE
probe.offset.z = zoffsetvalue;
#else
set_home_offset(Z_AXIS, -zoffsetvalue);
#endif
}
#if HAS_BED_PROBE
if (probe.offset.z != lastzoffset)
zoffsetvalue = lastzoffset = probe.offset.z;
#else
if (-home_offset.z != lastzoffset)
zoffsetvalue = lastzoffset = -home_offset.z;
#endif
#endif // HAS_ZOFFSET_ITEM
if (process == Menu || process == Value) {
switch (active_menu) {
case TempMenu:
#if HAS_HOTEND
if (thermalManager.temp_hotend[0].target != hotendtarget) {
hotendtarget = thermalManager.temp_hotend[0].target;
if (scrollpos <= TEMP_HOTEND && TEMP_HOTEND <= scrollpos + MROWS) {
if (process != Value || selection != TEMP_HOTEND - scrollpos)
Draw_Float(thermalManager.temp_hotend[0].target, TEMP_HOTEND - scrollpos, false, 1);
}
}
#endif
#if HAS_HEATED_BED
if (thermalManager.temp_bed.target != bedtarget) {
bedtarget = thermalManager.temp_bed.target;
if (scrollpos <= TEMP_BED && TEMP_BED <= scrollpos + MROWS) {
if (process != Value || selection != TEMP_HOTEND - scrollpos)
Draw_Float(thermalManager.temp_bed.target, TEMP_BED - scrollpos, false, 1);
}
}
#endif
#if HAS_FAN
if (thermalManager.fan_speed[0] != fanspeed) {
fanspeed = thermalManager.fan_speed[0];
if (scrollpos <= TEMP_FAN && TEMP_FAN <= scrollpos + MROWS) {
if (process != Value || selection != TEMP_HOTEND - scrollpos)
Draw_Float(thermalManager.fan_speed[0], TEMP_FAN - scrollpos, false, 1);
}
}
#endif
break;
case Tune:
#if HAS_HOTEND
if (thermalManager.temp_hotend[0].target != hotendtarget) {
hotendtarget = thermalManager.temp_hotend[0].target;
if (scrollpos <= TUNE_HOTEND && TUNE_HOTEND <= scrollpos + MROWS) {
if (process != Value || selection != TEMP_HOTEND - scrollpos)
Draw_Float(thermalManager.temp_hotend[0].target, TUNE_HOTEND - scrollpos, false, 1);
}
}
#endif
#if HAS_HEATED_BED
if (thermalManager.temp_bed.target != bedtarget) {
bedtarget = thermalManager.temp_bed.target;
if (scrollpos <= TUNE_BED && TUNE_BED <= scrollpos + MROWS) {
if (process != Value || selection != TEMP_HOTEND - scrollpos)
Draw_Float(thermalManager.temp_bed.target, TUNE_BED - scrollpos, false, 1);
}
}
#endif
#if HAS_FAN
if (thermalManager.fan_speed[0] != fanspeed) {
fanspeed = thermalManager.fan_speed[0];
if (scrollpos <= TUNE_FAN && TUNE_FAN <= scrollpos + MROWS) {
if (process != Value || selection != TEMP_HOTEND - scrollpos)
Draw_Float(thermalManager.fan_speed[0], TUNE_FAN - scrollpos, false, 1);
}
}
#endif
break;
}
}
}
void CrealityDWINClass::AudioFeedback(const bool success/*=true*/) {
if (ui.sound_on)
DONE_BUZZ(success);
else
Update_Status(success ? "Success" : "Failed");
}
void CrealityDWINClass::Save_Settings(char *buff) {
TERN_(AUTO_BED_LEVELING_UBL, eeprom_settings.tilt_grid_size = mesh_conf.tilt_grid - 1);
eeprom_settings.corner_pos = corner_pos * 10;
memcpy(buff, &eeprom_settings, _MIN(sizeof(eeprom_settings), eeprom_data_size));
}
void CrealityDWINClass::Load_Settings(const char *buff) {
memcpy(&eeprom_settings, buff, _MIN(sizeof(eeprom_settings), eeprom_data_size));
TERN_(AUTO_BED_LEVELING_UBL, mesh_conf.tilt_grid = eeprom_settings.tilt_grid_size + 1);
if (eeprom_settings.corner_pos == 0) eeprom_settings.corner_pos = 325;
corner_pos = eeprom_settings.corner_pos / 10.0f;
Redraw_Screen();
#if ENABLED(POWER_LOSS_RECOVERY)
static bool init = true;
if (init) {
init = false;
queue.inject(F("M1000 S"));
}
#endif
}
void CrealityDWINClass::Reset_Settings() {
eeprom_settings.time_format_textual = false;
TERN_(AUTO_BED_LEVELING_UBL, eeprom_settings.tilt_grid_size = 0);
eeprom_settings.corner_pos = 325;
eeprom_settings.cursor_color = 0;
eeprom_settings.menu_split_line = 0;
eeprom_settings.menu_top_bg = 0;
eeprom_settings.menu_top_txt = 0;
eeprom_settings.highlight_box = 0;
eeprom_settings.progress_percent = 0;
eeprom_settings.progress_time = 0;
eeprom_settings.status_bar_text = 0;
eeprom_settings.status_area_text = 0;
eeprom_settings.coordinates_text = 0;
eeprom_settings.coordinates_split_line = 0;
TERN_(AUTO_BED_LEVELING_UBL, mesh_conf.tilt_grid = eeprom_settings.tilt_grid_size + 1);
corner_pos = eeprom_settings.corner_pos / 10.0f;
TERN_(SOUND_MENU_ITEM, ui.sound_on = ENABLED(SOUND_ON_DEFAULT));
Redraw_Screen();
}
void MarlinUI::init_lcd() {
delay(800);
SERIAL_ECHOPGM("\nDWIN handshake ");
if (DWIN_Handshake()) SERIAL_ECHOLNPGM("ok."); else SERIAL_ECHOLNPGM("error.");
DWIN_Frame_SetDir(1); // Orientation 90°
DWIN_UpdateLCD(); // Show bootscreen (first image)
Encoder_Configuration();
for (uint16_t t = 0; t <= 100; t += 2) {
DWIN_ICON_Show(ICON, ICON_Bar, 15, 260);
DWIN_Draw_Rectangle(1, Color_Bg_Black, 15 + t * 242 / 100, 260, 257, 280);
DWIN_UpdateLCD();
delay(20);
}
DWIN_JPG_ShowAndCache(3);
DWIN_JPG_CacheTo1(Language_English);
CrealityDWIN.Redraw_Screen();
}
#if ENABLED(ADVANCED_PAUSE_FEATURE)
void MarlinUI::pause_show_message(const PauseMessage message, const PauseMode mode/*=PAUSE_MODE_SAME*/, const uint8_t extruder/*=active_extruder*/) {
switch (message) {
case PAUSE_MESSAGE_INSERT: CrealityDWIN.Confirm_Handler(FilInsert); break;
case PAUSE_MESSAGE_PURGE:
case PAUSE_MESSAGE_OPTION: CrealityDWIN.Popup_Handler(PurgeMore); break;
case PAUSE_MESSAGE_HEAT: CrealityDWIN.Confirm_Handler(HeaterTime); break;
case PAUSE_MESSAGE_WAITING: CrealityDWIN.Draw_Print_Screen(); break;
default: break;
}
}
#endif
#endif // DWIN_CREALITY_LCD_JYERSUI