/**
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */

//
// Main Menu
//

#include "../../inc/MarlinConfigPre.h"

#if HAS_LCD_MENU

#include "menu.h"
#include "../../module/temperature.h"
#include "../../gcode/queue.h"
#include "../../module/printcounter.h"
#include "../../module/stepper.h"
#include "../../sd/cardreader.h"

#if HAS_GAMES && DISABLED(LCD_INFO_MENU)
  #include "game/game.h"
#endif

#if EITHER(SDSUPPORT, HOST_PROMPT_SUPPORT) || defined(ACTION_ON_CANCEL)
  #define MACHINE_CAN_STOP 1
#endif
#if ANY(SDSUPPORT, HOST_PROMPT_SUPPORT, PARK_HEAD_ON_PAUSE) || defined(ACTION_ON_PAUSE)
  #define MACHINE_CAN_PAUSE 1
#endif

#if ENABLED(PRUSA_MMU2)
  #include "../../lcd/menu/menu_mmu2.h"
#endif

void menu_tune();
void menu_cancelobject();
void menu_motion();
void menu_temperature();
void menu_configuration();

#if ENABLED(CUSTOM_USER_MENUS)
  void menu_user();
#endif

#if HAS_POWER_MONITOR
  void menu_power_monitor();
#endif

#if ENABLED(MIXING_EXTRUDER)
  void menu_mixer();
#endif

#if ENABLED(ADVANCED_PAUSE_FEATURE)
  void _menu_temp_filament_op(const PauseMode, const int8_t);
  void menu_change_filament();
#endif

#if ENABLED(LCD_INFO_MENU)
  void menu_info();
#endif

#if EITHER(LED_CONTROL_MENU, CASE_LIGHT_MENU)
  void menu_led();
#endif

#if HAS_CUTTER
  void menu_spindle_laser();
#endif

extern const char M21_STR[];

void menu_main() {
  const bool busy = printingIsActive()
    #if ENABLED(SDSUPPORT)
      , card_detected = card.isMounted()
      , card_open = card_detected && card.isFileOpen()
    #endif
  ;

  START_MENU();
  BACK_ITEM(MSG_INFO_SCREEN);

  if (busy) {
    #if MACHINE_CAN_PAUSE
      ACTION_ITEM(MSG_PAUSE_PRINT, ui.pause_print);
    #endif
    #if MACHINE_CAN_STOP
      SUBMENU(MSG_STOP_PRINT, []{
        MenuItem_confirm::select_screen(
          GET_TEXT(MSG_BUTTON_STOP), GET_TEXT(MSG_BACK),
          ui.abort_print, ui.goto_previous_screen,
          GET_TEXT(MSG_STOP_PRINT), (const char *)nullptr, PSTR("?")
        );
      });
    #endif

    SUBMENU(MSG_TUNE, menu_tune);

    #if ENABLED(CANCEL_OBJECTS) && DISABLED(SLIM_LCD_MENUS)
      SUBMENU(MSG_CANCEL_OBJECT, []{ editable.int8 = -1; ui.goto_screen(menu_cancelobject); });
    #endif
  }
  else {

    #if !HAS_ENCODER_WHEEL && ENABLED(SDSUPPORT)

      // *** IF THIS SECTION IS CHANGED, REPRODUCE BELOW ***

      //
      // Autostart
      //
      #if ENABLED(MENU_ADDAUTOSTART)
        ACTION_ITEM(MSG_AUTOSTART, card.beginautostart);
      #endif

      if (card_detected) {
        if (!card_open) {
          SUBMENU(MSG_MEDIA_MENU, menu_media);
          MENU_ITEM(gcode,
            #if PIN_EXISTS(SD_DETECT)
              MSG_CHANGE_MEDIA, M21_STR
            #else
              MSG_RELEASE_MEDIA, PSTR("M22")
            #endif
          );
        }
      }
      else {
        #if PIN_EXISTS(SD_DETECT)
          ACTION_ITEM(MSG_NO_MEDIA, nullptr);
        #else
          GCODES_ITEM(MSG_ATTACH_MEDIA, M21_STR);
        #endif
      }

    #endif // !HAS_ENCODER_WHEEL && SDSUPPORT

    if (TERN0(MACHINE_CAN_PAUSE, printingIsPaused()))
      ACTION_ITEM(MSG_RESUME_PRINT, ui.resume_print);

    SUBMENU(MSG_MOTION, menu_motion);
  }

  #if HAS_CUTTER
    SUBMENU(MSG_CUTTER(MENU), menu_spindle_laser);
  #endif

  #if HAS_TEMPERATURE
    SUBMENU(MSG_TEMPERATURE, menu_temperature);
  #endif

  #if HAS_POWER_MONITOR
    MENU_ITEM(submenu, MSG_POWER_MONITOR, menu_power_monitor);
  #endif

  #if ENABLED(MIXING_EXTRUDER)
    SUBMENU(MSG_MIXER, menu_mixer);
  #endif

  #if ENABLED(MMU2_MENUS)
    if (!busy) SUBMENU(MSG_MMU2_MENU, menu_mmu2);
  #endif

  SUBMENU(MSG_CONFIGURATION, menu_configuration);

  #if ENABLED(CUSTOM_USER_MENUS)
    #ifdef CUSTOM_USER_MENU_TITLE
      SUBMENU_P(PSTR(CUSTOM_USER_MENU_TITLE), menu_user);
    #else
      SUBMENU(MSG_USER_MENU, menu_user);
    #endif
  #endif

  #if ENABLED(ADVANCED_PAUSE_FEATURE)
    #if E_STEPPERS == 1 && DISABLED(FILAMENT_LOAD_UNLOAD_GCODES)
      if (thermalManager.targetHotEnoughToExtrude(active_extruder))
        GCODES_ITEM(MSG_FILAMENTCHANGE, PSTR("M600 B0"));
      else
        SUBMENU(MSG_FILAMENTCHANGE, []{ _menu_temp_filament_op(PAUSE_MODE_CHANGE_FILAMENT, 0); });
    #else
      SUBMENU(MSG_FILAMENTCHANGE, menu_change_filament);
    #endif
  #endif

  #if ENABLED(LCD_INFO_MENU)
    SUBMENU(MSG_INFO_MENU, menu_info);
  #endif

  #if EITHER(LED_CONTROL_MENU, CASE_LIGHT_MENU)
    SUBMENU(MSG_LEDS, menu_led);
  #endif

  //
  // Switch power on/off
  //
  #if ENABLED(PSU_CONTROL)
    if (powersupply_on)
      GCODES_ITEM(MSG_SWITCH_PS_OFF, PSTR("M81"));
    else
      GCODES_ITEM(MSG_SWITCH_PS_ON, PSTR("M80"));
  #endif

  #if BOTH(HAS_ENCODER_WHEEL, SDSUPPORT)

    if (!busy) {

      // *** IF THIS SECTION IS CHANGED, REPRODUCE ABOVE ***

      //
      // Autostart
      //
      #if ENABLED(MENU_ADDAUTOSTART)
        ACTION_ITEM(MSG_AUTOSTART, card.beginautostart);
      #endif

      if (card_detected) {
        if (!card_open) {
          MENU_ITEM(gcode,
            #if PIN_EXISTS(SD_DETECT)
              MSG_CHANGE_MEDIA, M21_STR
            #else
              MSG_RELEASE_MEDIA, PSTR("M22")
            #endif
          );
          SUBMENU(MSG_MEDIA_MENU, menu_media);
        }
      }
      else {
        #if PIN_EXISTS(SD_DETECT)
          ACTION_ITEM(MSG_NO_MEDIA, nullptr);
        #else
          GCODES_ITEM(MSG_ATTACH_MEDIA, M21_STR);
        #endif
      }
    }

  #endif // HAS_ENCODER_WHEEL && SDSUPPORT

  #if HAS_SERVICE_INTERVALS
    static auto _service_reset = [](const int index) {
      print_job_timer.resetServiceInterval(index);
      ui.completion_feedback();
      ui.reset_status();
      ui.return_to_status();
    };
    #if SERVICE_INTERVAL_1 > 0
      CONFIRM_ITEM_P(PSTR(SERVICE_NAME_1),
        MSG_BUTTON_RESET, MSG_BUTTON_CANCEL,
        []{ _service_reset(1); }, ui.goto_previous_screen,
        GET_TEXT(MSG_SERVICE_RESET), F(SERVICE_NAME_1), PSTR("?")
      );
    #endif
    #if SERVICE_INTERVAL_2 > 0
      CONFIRM_ITEM_P(PSTR(SERVICE_NAME_2),
        MSG_BUTTON_RESET, MSG_BUTTON_CANCEL,
        []{ _service_reset(2); }, ui.goto_previous_screen,
        GET_TEXT(MSG_SERVICE_RESET), F(SERVICE_NAME_2), PSTR("?")
      );
    #endif
    #if SERVICE_INTERVAL_3 > 0
      CONFIRM_ITEM_P(PSTR(SERVICE_NAME_3),
        MSG_BUTTON_RESET, MSG_BUTTON_CANCEL,
        []{ _service_reset(3); }, ui.goto_previous_screen,
        GET_TEXT(MSG_SERVICE_RESET), F(SERVICE_NAME_3), PSTR("?")
      );
    #endif
  #endif

  #if HAS_GAMES && DISABLED(LCD_INFO_MENU)
    #if ENABLED(GAMES_EASTER_EGG)
      SKIP_ITEM();
      SKIP_ITEM();
      SKIP_ITEM();
    #endif
    // Game sub-menu or the individual game
    {
      SUBMENU(
        #if HAS_GAME_MENU
          MSG_GAMES, menu_game
        #elif ENABLED(MARLIN_BRICKOUT)
          MSG_BRICKOUT, brickout.enter_game
        #elif ENABLED(MARLIN_INVADERS)
          MSG_INVADERS, invaders.enter_game
        #elif ENABLED(MARLIN_SNAKE)
          MSG_SNAKE, snake.enter_game
        #elif ENABLED(MARLIN_MAZE)
          MSG_MAZE, maze.enter_game
        #endif
      );
    }
  #endif

  END_MENU();
}

#endif // HAS_LCD_MENU