/** * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ #pragma once // // File: pins/pins_postprocess.h // Post-process pins according to configured settings // // Define certain undefined pins #ifndef X_MS1_PIN #define X_MS1_PIN -1 #endif #ifndef X_MS2_PIN #define X_MS2_PIN -1 #endif #ifndef X_MS3_PIN #define X_MS3_PIN -1 #endif #ifndef Y_MS1_PIN #define Y_MS1_PIN -1 #endif #ifndef Y_MS2_PIN #define Y_MS2_PIN -1 #endif #ifndef Y_MS3_PIN #define Y_MS3_PIN -1 #endif #ifndef Z_MS1_PIN #define Z_MS1_PIN -1 #endif #ifndef Z_MS2_PIN #define Z_MS2_PIN -1 #endif #ifndef Z_MS3_PIN #define Z_MS3_PIN -1 #endif #ifndef E0_MS1_PIN #define E0_MS1_PIN -1 #endif #ifndef E0_MS2_PIN #define E0_MS2_PIN -1 #endif #ifndef E0_MS3_PIN #define E0_MS3_PIN -1 #endif #ifndef E1_MS1_PIN #define E1_MS1_PIN -1 #endif #ifndef E1_MS2_PIN #define E1_MS2_PIN -1 #endif #ifndef E1_MS3_PIN #define E1_MS3_PIN -1 #endif #ifndef E2_MS1_PIN #define E2_MS1_PIN -1 #endif #ifndef E2_MS2_PIN #define E2_MS2_PIN -1 #endif #ifndef E2_MS3_PIN #define E2_MS3_PIN -1 #endif #ifndef E3_MS1_PIN #define E3_MS1_PIN -1 #endif #ifndef E3_MS2_PIN #define E3_MS2_PIN -1 #endif #ifndef E3_MS3_PIN #define E3_MS3_PIN -1 #endif #ifndef E4_MS1_PIN #define E4_MS1_PIN -1 #endif #ifndef E4_MS2_PIN #define E4_MS2_PIN -1 #endif #ifndef E4_MS3_PIN #define E4_MS3_PIN -1 #endif #ifndef E5_MS1_PIN #define E5_MS1_PIN -1 #endif #ifndef E5_MS2_PIN #define E5_MS2_PIN -1 #endif #ifndef E5_MS3_PIN #define E5_MS3_PIN -1 #endif #ifndef E6_MS1_PIN #define E6_MS1_PIN -1 #endif #ifndef E6_MS2_PIN #define E6_MS2_PIN -1 #endif #ifndef E6_MS3_PIN #define E6_MS3_PIN -1 #endif #ifndef E7_MS1_PIN #define E7_MS1_PIN -1 #endif #ifndef E7_MS2_PIN #define E7_MS2_PIN -1 #endif #ifndef E7_MS3_PIN #define E7_MS3_PIN -1 #endif #ifndef E0_STEP_PIN #define E0_STEP_PIN -1 #endif #ifndef E0_DIR_PIN #define E0_DIR_PIN -1 #endif #ifndef E0_ENABLE_PIN #define E0_ENABLE_PIN -1 #endif #ifndef E1_STEP_PIN #define E1_STEP_PIN -1 #endif #ifndef E1_DIR_PIN #define E1_DIR_PIN -1 #endif #ifndef E1_ENABLE_PIN #define E1_ENABLE_PIN -1 #endif #ifndef E2_STEP_PIN #define E2_STEP_PIN -1 #endif #ifndef E2_DIR_PIN #define E2_DIR_PIN -1 #endif #ifndef E2_ENABLE_PIN #define E2_ENABLE_PIN -1 #endif #ifndef E3_STEP_PIN #define E3_STEP_PIN -1 #endif #ifndef E3_DIR_PIN #define E3_DIR_PIN -1 #endif #ifndef E3_ENABLE_PIN #define E3_ENABLE_PIN -1 #endif #ifndef E4_STEP_PIN #define E4_STEP_PIN -1 #endif #ifndef E4_DIR_PIN #define E4_DIR_PIN -1 #endif #ifndef E4_ENABLE_PIN #define E4_ENABLE_PIN -1 #endif #ifndef E5_STEP_PIN #define E5_STEP_PIN -1 #endif #ifndef E5_DIR_PIN #define E5_DIR_PIN -1 #endif #ifndef E5_ENABLE_PIN #define E5_ENABLE_PIN -1 #endif #ifndef E6_STEP_PIN #define E6_STEP_PIN -1 #endif #ifndef E6_DIR_PIN #define E6_DIR_PIN -1 #endif #ifndef E6_ENABLE_PIN #define E6_ENABLE_PIN -1 #endif #ifndef E7_STEP_PIN #define E7_STEP_PIN -1 #endif #ifndef E7_DIR_PIN #define E7_DIR_PIN -1 #endif #ifndef E7_ENABLE_PIN #define E7_ENABLE_PIN -1 #endif // // Destroy unused CS pins // #if !AXIS_HAS_SPI(X) #undef X_CS_PIN #endif #if !AXIS_HAS_SPI(Y) #undef Y_CS_PIN #endif #if !AXIS_HAS_SPI(Z) #undef Z_CS_PIN #endif #if E_STEPPERS && !AXIS_HAS_SPI(E0) #undef E0_CS_PIN #endif #if E_STEPPERS > 1 && !AXIS_HAS_SPI(E1) #undef E1_CS_PIN #endif #if E_STEPPERS > 2 && !AXIS_HAS_SPI(E2) #undef E2_CS_PIN #endif #if E_STEPPERS > 3 && !AXIS_HAS_SPI(E3) #undef E3_CS_PIN #endif #if E_STEPPERS > 4 && !AXIS_HAS_SPI(E4) #undef E4_CS_PIN #endif #if E_STEPPERS > 5 && !AXIS_HAS_SPI(E5) #undef E5_CS_PIN #endif #if E_STEPPERS > 6 && !AXIS_HAS_SPI(E6) #undef E6_CS_PIN #endif #if E_STEPPERS > 7 && !AXIS_HAS_SPI(E7) #undef E7_CS_PIN #endif #ifndef X_CS_PIN #define X_CS_PIN -1 #endif #ifndef Y_CS_PIN #define Y_CS_PIN -1 #endif #ifndef Z_CS_PIN #define Z_CS_PIN -1 #endif #ifndef E0_CS_PIN #define E0_CS_PIN -1 #endif #ifndef E1_CS_PIN #define E1_CS_PIN -1 #endif #ifndef E2_CS_PIN #define E2_CS_PIN -1 #endif #ifndef E3_CS_PIN #define E3_CS_PIN -1 #endif #ifndef E4_CS_PIN #define E4_CS_PIN -1 #endif #ifndef E5_CS_PIN #define E5_CS_PIN -1 #endif #ifndef E6_CS_PIN #define E6_CS_PIN -1 #endif #ifndef E7_CS_PIN #define E7_CS_PIN -1 #endif #ifndef FAN_PIN #define FAN_PIN -1 #endif #define FAN0_PIN FAN_PIN #ifndef FAN1_PIN #define FAN1_PIN -1 #endif #ifndef FAN2_PIN #define FAN2_PIN -1 #endif #ifndef CONTROLLER_FAN_PIN #define CONTROLLER_FAN_PIN -1 #endif #ifndef FANMUX0_PIN #define FANMUX0_PIN -1 #endif #ifndef FANMUX1_PIN #define FANMUX1_PIN -1 #endif #ifndef FANMUX2_PIN #define FANMUX2_PIN -1 #endif #ifndef HEATER_0_PIN #define HEATER_0_PIN -1 #endif #ifndef HEATER_1_PIN #define HEATER_1_PIN -1 #endif #ifndef HEATER_2_PIN #define HEATER_2_PIN -1 #endif #ifndef HEATER_3_PIN #define HEATER_3_PIN -1 #endif #ifndef HEATER_4_PIN #define HEATER_4_PIN -1 #endif #ifndef HEATER_5_PIN #define HEATER_5_PIN -1 #endif #ifndef HEATER_6_PIN #define HEATER_6_PIN -1 #endif #ifndef HEATER_7_PIN #define HEATER_7_PIN -1 #endif #ifndef HEATER_BED_PIN #define HEATER_BED_PIN -1 #endif #ifndef TEMP_0_PIN #define TEMP_0_PIN -1 #endif #ifndef TEMP_1_PIN #define TEMP_1_PIN -1 #endif #ifndef TEMP_2_PIN #define TEMP_2_PIN -1 #endif #ifndef TEMP_3_PIN #define TEMP_3_PIN -1 #endif #ifndef TEMP_4_PIN #define TEMP_4_PIN -1 #endif #ifndef TEMP_5_PIN #define TEMP_5_PIN -1 #endif #ifndef TEMP_6_PIN #define TEMP_6_PIN -1 #endif #ifndef TEMP_7_PIN #define TEMP_7_PIN -1 #endif #ifndef TEMP_BED_PIN #define TEMP_BED_PIN -1 #endif #ifndef SD_DETECT_PIN #define SD_DETECT_PIN -1 #endif #ifndef SDPOWER_PIN #define SDPOWER_PIN -1 #endif #ifndef SDSS #define SDSS -1 #endif #ifndef LED_PIN #define LED_PIN -1 #endif #if DISABLED(PSU_CONTROL) || !defined(PS_ON_PIN) #undef PS_ON_PIN #define PS_ON_PIN -1 #endif #ifndef KILL_PIN #define KILL_PIN -1 #endif #ifndef SUICIDE_PIN #define SUICIDE_PIN -1 #endif #ifndef SUICIDE_PIN_INVERTING #define SUICIDE_PIN_INVERTING false #endif #ifndef NUM_SERVO_PLUGS #define NUM_SERVO_PLUGS 4 #endif // // Assign endstop pins for boards with only 3 connectors // #ifdef X_STOP_PIN #if X_HOME_DIR < 0 #define X_MIN_PIN X_STOP_PIN #ifndef X_MAX_PIN #define X_MAX_PIN -1 #endif #else #define X_MAX_PIN X_STOP_PIN #ifndef X_MIN_PIN #define X_MIN_PIN -1 #endif #endif #elif X_HOME_DIR < 0 #define X_STOP_PIN X_MIN_PIN #else #define X_STOP_PIN X_MAX_PIN #endif #ifdef Y_STOP_PIN #if Y_HOME_DIR < 0 #define Y_MIN_PIN Y_STOP_PIN #ifndef Y_MAX_PIN #define Y_MAX_PIN -1 #endif #else #define Y_MAX_PIN Y_STOP_PIN #ifndef Y_MIN_PIN #define Y_MIN_PIN -1 #endif #endif #elif Y_HOME_DIR < 0 #define Y_STOP_PIN Y_MIN_PIN #else #define Y_STOP_PIN Y_MAX_PIN #endif #ifdef Z_STOP_PIN #if Z_HOME_DIR < 0 #define Z_MIN_PIN Z_STOP_PIN #ifndef Z_MAX_PIN #define Z_MAX_PIN -1 #endif #else #define Z_MAX_PIN Z_STOP_PIN #ifndef Z_MIN_PIN #define Z_MIN_PIN -1 #endif #endif #elif Z_HOME_DIR < 0 #define Z_STOP_PIN Z_MIN_PIN #else #define Z_STOP_PIN Z_MAX_PIN #endif // // Disable unused endstop / probe pins // #if !HAS_CUSTOM_PROBE_PIN #undef Z_MIN_PROBE_PIN #define Z_MIN_PROBE_PIN -1 #endif #if DISABLED(USE_XMAX_PLUG) #undef X_MAX_PIN #define X_MAX_PIN -1 #endif #if DISABLED(USE_YMAX_PLUG) #undef Y_MAX_PIN #define Y_MAX_PIN -1 #endif #if DISABLED(USE_ZMAX_PLUG) #undef Z_MAX_PIN #define Z_MAX_PIN -1 #endif #if DISABLED(USE_XMIN_PLUG) #undef X_MIN_PIN #define X_MIN_PIN -1 #endif #if DISABLED(USE_YMIN_PLUG) #undef Y_MIN_PIN #define Y_MIN_PIN -1 #endif #if DISABLED(USE_ZMIN_PLUG) #undef Z_MIN_PIN #define Z_MIN_PIN -1 #endif #if HAS_FILAMENT_SENSOR #define FIL_RUNOUT1_PIN FIL_RUNOUT_PIN #else #undef FIL_RUNOUT_PIN #undef FIL_RUNOUT1_PIN #endif #ifndef LCD_PINS_D4 #define LCD_PINS_D4 -1 #endif #if HAS_MARLINUI_HD44780 || TOUCH_UI_ULTIPANEL #ifndef LCD_PINS_D5 #define LCD_PINS_D5 -1 #endif #ifndef LCD_PINS_D6 #define LCD_PINS_D6 -1 #endif #ifndef LCD_PINS_D7 #define LCD_PINS_D7 -1 #endif #endif /** * Auto-Assignment for Dual X, Dual Y, Multi-Z Steppers * * By default X2 is assigned to the next open E plug * on the board, then in order, Y2, Z2, Z3. These can be * overridden in Configuration.h or Configuration_adv.h. */ #define __PEXI(p,q) PIN_EXISTS(E##p##_##q) #define _PEXI(p,q) __PEXI(p,q) #define __EPIN(p,q) E##p##_##q##_PIN #define _EPIN(p,q) __EPIN(p,q) #define DIAG_REMAPPED(p,q) (PIN_EXISTS(q) && _EPIN(p##_E_INDEX, DIAG) == q##_PIN) // The X2 axis, if any, should be the next open extruder port #define X2_E_INDEX E_STEPPERS #if EITHER(DUAL_X_CARRIAGE, X_DUAL_STEPPER_DRIVERS) #ifndef X2_STEP_PIN #define X2_STEP_PIN _EPIN(X2_E_INDEX, STEP) #define X2_DIR_PIN _EPIN(X2_E_INDEX, DIR) #define X2_ENABLE_PIN _EPIN(X2_E_INDEX, ENABLE) #if X2_E_INDEX >= MAX_EXTRUDERS || !PIN_EXISTS(X2_STEP) #error "No E stepper plug left for X2!" #endif #endif #ifndef X2_MS1_PIN #define X2_MS1_PIN _EPIN(X2_E_INDEX, MS1) #endif #ifndef X2_MS2_PIN #define X2_MS2_PIN _EPIN(X2_E_INDEX, MS2) #endif #ifndef X2_MS3_PIN #define X2_MS3_PIN _EPIN(X2_E_INDEX, MS3) #endif #if AXIS_HAS_SPI(X2) && !defined(X2_CS_PIN) #define X2_CS_PIN _EPIN(X2_E_INDEX, CS) #endif #if AXIS_HAS_UART(X2) #ifndef X2_SERIAL_TX_PIN #define X2_SERIAL_TX_PIN _EPIN(X2_E_INDEX, SERIAL_TX) #endif #ifndef X2_SERIAL_RX_PIN #define X2_SERIAL_RX_PIN _EPIN(X2_E_INDEX, SERIAL_RX) #endif #endif // // Auto-assign pins for stallGuard sensorless homing // #if defined(X2_STALL_SENSITIVITY) && ENABLED(X_DUAL_ENDSTOPS) && _PEXI(X2_E_INDEX, DIAG) #define X2_DIAG_PIN _EPIN(X2_E_INDEX, DIAG) #if DIAG_REMAPPED(X2, X_MIN) // If already remapped in the pins file... #define X2_USE_ENDSTOP _XMIN_ #elif DIAG_REMAPPED(X2, Y_MIN) #define X2_USE_ENDSTOP _YMIN_ #elif DIAG_REMAPPED(X2, Z_MIN) #define X2_USE_ENDSTOP _ZMIN_ #elif DIAG_REMAPPED(X2, X_MAX) #define X2_USE_ENDSTOP _XMAX_ #elif DIAG_REMAPPED(X2, Y_MAX) #define X2_USE_ENDSTOP _YMAX_ #elif DIAG_REMAPPED(X2, Z_MAX) #define X2_USE_ENDSTOP _ZMAX_ #else // Otherwise use the driver DIAG_PIN directly #define _X2_USE_ENDSTOP(P) _E##P##_DIAG_ #define X2_USE_ENDSTOP _X2_USE_ENDSTOP(X2_E_INDEX) #endif #undef X2_DIAG_PIN #endif #define Y2_E_INDEX INCREMENT(X2_E_INDEX) #else #define Y2_E_INDEX X2_E_INDEX #endif #ifndef X2_CS_PIN #define X2_CS_PIN -1 #endif #ifndef X2_MS1_PIN #define X2_MS1_PIN -1 #endif #ifndef X2_MS2_PIN #define X2_MS2_PIN -1 #endif #ifndef X2_MS3_PIN #define X2_MS3_PIN -1 #endif // The Y2 axis, if any, should be the next open extruder port #if ENABLED(Y_DUAL_STEPPER_DRIVERS) #ifndef Y2_STEP_PIN #define Y2_STEP_PIN _EPIN(Y2_E_INDEX, STEP) #define Y2_DIR_PIN _EPIN(Y2_E_INDEX, DIR) #define Y2_ENABLE_PIN _EPIN(Y2_E_INDEX, ENABLE) #if Y2_E_INDEX >= MAX_EXTRUDERS || !PIN_EXISTS(Y2_STEP) #error "No E stepper plug left for Y2!" #endif #endif #ifndef Y2_MS1_PIN #define Y2_MS1_PIN _EPIN(Y2_E_INDEX, MS1) #endif #ifndef Y2_MS2_PIN #define Y2_MS2_PIN _EPIN(Y2_E_INDEX, MS2) #endif #ifndef Y2_MS3_PIN #define Y2_MS3_PIN _EPIN(Y2_E_INDEX, MS3) #endif #if AXIS_HAS_SPI(Y2) && !defined(Y2_CS_PIN) #define Y2_CS_PIN _EPIN(Y2_E_INDEX, CS) #endif #if AXIS_HAS_UART(Y2) #ifndef Y2_SERIAL_TX_PIN #define Y2_SERIAL_TX_PIN _EPIN(Y2_E_INDEX, SERIAL_TX) #endif #ifndef Y2_SERIAL_RX_PIN #define Y2_SERIAL_RX_PIN _EPIN(Y2_E_INDEX, SERIAL_RX) #endif #endif #if defined(Y2_STALL_SENSITIVITY) && ENABLED(Y_DUAL_ENDSTOPS) && _PEXI(Y2_E_INDEX, DIAG) #define Y2_DIAG_PIN _EPIN(Y2_E_INDEX, DIAG) #if DIAG_REMAPPED(Y2, X_MIN) #define Y2_USE_ENDSTOP _XMIN_ #elif DIAG_REMAPPED(Y2, Y_MIN) #define Y2_USE_ENDSTOP _YMIN_ #elif DIAG_REMAPPED(Y2, Z_MIN) #define Y2_USE_ENDSTOP _ZMIN_ #elif DIAG_REMAPPED(Y2, X_MAX) #define Y2_USE_ENDSTOP _XMAX_ #elif DIAG_REMAPPED(Y2, Y_MAX) #define Y2_USE_ENDSTOP _YMAX_ #elif DIAG_REMAPPED(Y2, Z_MAX) #define Y2_USE_ENDSTOP _ZMAX_ #else #define _Y2_USE_ENDSTOP(P) _E##P##_DIAG_ #define Y2_USE_ENDSTOP _Y2_USE_ENDSTOP(Y2_E_INDEX) #endif #undef Y2_DIAG_PIN #endif #define Z2_E_INDEX INCREMENT(Y2_E_INDEX) #else #define Z2_E_INDEX Y2_E_INDEX #endif #ifndef Y2_CS_PIN #define Y2_CS_PIN -1 #endif #ifndef Y2_MS1_PIN #define Y2_MS1_PIN -1 #endif #ifndef Y2_MS2_PIN #define Y2_MS2_PIN -1 #endif #ifndef Y2_MS3_PIN #define Y2_MS3_PIN -1 #endif // The Z2 axis, if any, should be the next open extruder port #if NUM_Z_STEPPER_DRIVERS >= 2 #ifndef Z2_STEP_PIN #define Z2_STEP_PIN _EPIN(Z2_E_INDEX, STEP) #define Z2_DIR_PIN _EPIN(Z2_E_INDEX, DIR) #define Z2_ENABLE_PIN _EPIN(Z2_E_INDEX, ENABLE) #if Z2_E_INDEX >= MAX_EXTRUDERS || !PIN_EXISTS(Z2_STEP) #error "No E stepper plug left for Z2!" #endif #endif #ifndef Z2_MS1_PIN #define Z2_MS1_PIN _EPIN(Z2_E_INDEX, MS1) #endif #ifndef Z2_MS2_PIN #define Z2_MS2_PIN _EPIN(Z2_E_INDEX, MS2) #endif #ifndef Z2_MS3_PIN #define Z2_MS3_PIN _EPIN(Z2_E_INDEX, MS3) #endif #if AXIS_HAS_SPI(Z2) && !defined(Z2_CS_PIN) #define Z2_CS_PIN _EPIN(Z2_E_INDEX, CS) #endif #if AXIS_HAS_UART(Z2) #ifndef Z2_SERIAL_TX_PIN #define Z2_SERIAL_TX_PIN _EPIN(Z2_E_INDEX, SERIAL_TX) #endif #ifndef Z2_SERIAL_RX_PIN #define Z2_SERIAL_RX_PIN _EPIN(Z2_E_INDEX, SERIAL_RX) #endif #endif #if defined(Z2_STALL_SENSITIVITY) && ENABLED(Z_MULTI_ENDSTOPS) && NUM_Z_STEPPER_DRIVERS >= 2 && _PEXI(Z2_E_INDEX, DIAG) #define Z2_DIAG_PIN _EPIN(Z2_E_INDEX, DIAG) #if DIAG_REMAPPED(Z2, X_MIN) #define Z2_USE_ENDSTOP _XMIN_ #elif DIAG_REMAPPED(Z2, Y_MIN) #define Z2_USE_ENDSTOP _YMIN_ #elif DIAG_REMAPPED(Z2, Z_MIN) #define Z2_USE_ENDSTOP _ZMIN_ #elif DIAG_REMAPPED(Z2, X_MAX) #define Z2_USE_ENDSTOP _XMAX_ #elif DIAG_REMAPPED(Z2, Y_MAX) #define Z2_USE_ENDSTOP _YMAX_ #elif DIAG_REMAPPED(Z2, Z_MAX) #define Z2_USE_ENDSTOP _ZMAX_ #else #define _Z2_USE_ENDSTOP(P) _E##P##_DIAG_ #define Z2_USE_ENDSTOP _Z2_USE_ENDSTOP(Z2_E_INDEX) #endif #undef Z2_DIAG_PIN #endif #define Z3_E_INDEX INCREMENT(Z2_E_INDEX) #else #define Z3_E_INDEX Z2_E_INDEX #endif #ifndef Z2_CS_PIN #define Z2_CS_PIN -1 #endif #ifndef Z2_MS1_PIN #define Z2_MS1_PIN -1 #endif #ifndef Z2_MS2_PIN #define Z2_MS2_PIN -1 #endif #ifndef Z2_MS3_PIN #define Z2_MS3_PIN -1 #endif #if NUM_Z_STEPPER_DRIVERS >= 3 #ifndef Z3_STEP_PIN #define Z3_STEP_PIN _EPIN(Z3_E_INDEX, STEP) #define Z3_DIR_PIN _EPIN(Z3_E_INDEX, DIR) #define Z3_ENABLE_PIN _EPIN(Z3_E_INDEX, ENABLE) #if Z3_E_INDEX >= MAX_EXTRUDERS || !PIN_EXISTS(Z3_STEP) #error "No E stepper plug left for Z3!" #endif #endif #if AXIS_HAS_SPI(Z3) #ifndef Z3_CS_PIN #define Z3_CS_PIN _EPIN(Z3_E_INDEX, CS) #endif #endif #ifndef Z3_MS1_PIN #define Z3_MS1_PIN _EPIN(Z3_E_INDEX, MS1) #endif #ifndef Z3_MS2_PIN #define Z3_MS2_PIN _EPIN(Z3_E_INDEX, MS2) #endif #ifndef Z3_MS3_PIN #define Z3_MS3_PIN _EPIN(Z3_E_INDEX, MS3) #endif #if AXIS_HAS_UART(Z3) #ifndef Z3_SERIAL_TX_PIN #define Z3_SERIAL_TX_PIN _EPIN(Z3_E_INDEX, SERIAL_TX) #endif #ifndef Z3_SERIAL_RX_PIN #define Z3_SERIAL_RX_PIN _EPIN(Z3_E_INDEX, SERIAL_RX) #endif #endif #if defined(Z3_STALL_SENSITIVITY) && ENABLED(Z_MULTI_ENDSTOPS) && NUM_Z_STEPPER_DRIVERS >= 3 && _PEXI(Z3_E_INDEX, DIAG) #define Z3_DIAG_PIN _EPIN(Z3_E_INDEX, DIAG) #if DIAG_REMAPPED(Z3, X_MIN) #define Z3_USE_ENDSTOP _XMIN_ #elif DIAG_REMAPPED(Z3, Y_MIN) #define Z3_USE_ENDSTOP _YMIN_ #elif DIAG_REMAPPED(Z3, Z_MIN) #define Z3_USE_ENDSTOP _ZMIN_ #elif DIAG_REMAPPED(Z3, X_MAX) #define Z3_USE_ENDSTOP _XMAX_ #elif DIAG_REMAPPED(Z3, Y_MAX) #define Z3_USE_ENDSTOP _YMAX_ #elif DIAG_REMAPPED(Z3, Z_MAX) #define Z3_USE_ENDSTOP _ZMAX_ #else #define _Z3_USE_ENDSTOP(P) _E##P##_DIAG_ #define Z3_USE_ENDSTOP _Z3_USE_ENDSTOP(Z3_E_INDEX) #endif #undef Z3_DIAG_PIN #endif #define Z4_E_INDEX INCREMENT(Z3_E_INDEX) #endif #ifndef Z3_CS_PIN #define Z3_CS_PIN -1 #endif #ifndef Z3_MS1_PIN #define Z3_MS1_PIN -1 #endif #ifndef Z3_MS2_PIN #define Z3_MS2_PIN -1 #endif #ifndef Z3_MS3_PIN #define Z3_MS3_PIN -1 #endif #if NUM_Z_STEPPER_DRIVERS >= 4 #ifndef Z4_STEP_PIN #define Z4_STEP_PIN _EPIN(Z4_E_INDEX, STEP) #define Z4_DIR_PIN _EPIN(Z4_E_INDEX, DIR) #define Z4_ENABLE_PIN _EPIN(Z4_E_INDEX, ENABLE) #if Z4_E_INDEX >= MAX_EXTRUDERS || !PIN_EXISTS(Z4_STEP) #error "No E stepper plug left for Z4!" #endif #endif #if AXIS_HAS_SPI(Z4) #ifndef Z4_CS_PIN #define Z4_CS_PIN _EPIN(Z4_E_INDEX, CS) #endif #endif #ifndef Z4_MS1_PIN #define Z4_MS1_PIN _EPIN(Z4_E_INDEX, MS1) #endif #ifndef Z4_MS2_PIN #define Z4_MS2_PIN _EPIN(Z4_E_INDEX, MS2) #endif #ifndef Z4_MS3_PIN #define Z4_MS3_PIN _EPIN(Z4_E_INDEX, MS3) #endif #if AXIS_HAS_UART(Z4) #ifndef Z4_SERIAL_TX_PIN #define Z4_SERIAL_TX_PIN _EPIN(Z4_E_INDEX, SERIAL_TX) #endif #ifndef Z4_SERIAL_RX_PIN #define Z4_SERIAL_RX_PIN _EPIN(Z4_E_INDEX, SERIAL_RX) #endif #endif #if defined(Z4_STALL_SENSITIVITY) && ENABLED(Z_MULTI_ENDSTOPS) && NUM_Z_STEPPER_DRIVERS >= 4 && _PEXI(Z4_E_INDEX, DIAG) #define Z4_DIAG_PIN _EPIN(Z4_E_INDEX, DIAG) #if DIAG_REMAPPED(Z4, X_MIN) #define Z4_USE_ENDSTOP _XMIN_ #elif DIAG_REMAPPED(Z4, Y_MIN) #define Z4_USE_ENDSTOP _YMIN_ #elif DIAG_REMAPPED(Z4, Z_MIN) #define Z4_USE_ENDSTOP _ZMIN_ #elif DIAG_REMAPPED(Z4, X_MAX) #define Z4_USE_ENDSTOP _XMAX_ #elif DIAG_REMAPPED(Z4, Y_MAX) #define Z4_USE_ENDSTOP _YMAX_ #elif DIAG_REMAPPED(Z4, Z_MAX) #define Z4_USE_ENDSTOP _ZMAX_ #else #define _Z4_USE_ENDSTOP(P) _E##P##_DIAG_ #define Z4_USE_ENDSTOP _Z4_USE_ENDSTOP(Z4_E_INDEX) #endif #undef Z4_DIAG_PIN #endif #endif #ifndef Z4_CS_PIN #define Z4_CS_PIN -1 #endif #ifndef Z4_MS1_PIN #define Z4_MS1_PIN -1 #endif #ifndef Z4_MS2_PIN #define Z4_MS2_PIN -1 #endif #ifndef Z4_MS3_PIN #define Z4_MS3_PIN -1 #endif #if HAS_MARLINUI_U8GLIB #if !defined(ST7920_DELAY_1) && defined(BOARD_ST7920_DELAY_1) #define ST7920_DELAY_1 BOARD_ST7920_DELAY_1 #endif #if !defined(ST7920_DELAY_2) && defined(BOARD_ST7920_DELAY_2) #define ST7920_DELAY_2 BOARD_ST7920_DELAY_2 #endif #if !defined(ST7920_DELAY_3) && defined(BOARD_ST7920_DELAY_3) #define ST7920_DELAY_3 BOARD_ST7920_DELAY_3 #endif #else #undef ST7920_DELAY_1 #undef ST7920_DELAY_2 #undef ST7920_DELAY_3 #undef BOARD_ST7920_DELAY_1 #undef BOARD_ST7920_DELAY_2 #undef BOARD_ST7920_DELAY_3 #endif #undef HAS_FREE_AUX2_PINS #undef DIAG_REMAPPED