/** * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ #pragma once /** * Dutch * * LCD Menu Messages * See also https://marlinfw.org/docs/development/lcd_language.html */ #define DISPLAY_CHARSET_ISO10646_1 #define NOT_EXTENDED_ISO10646_1_5X7 namespace Language_nl { using namespace Language_en; // Inherit undefined strings from English constexpr uint8_t CHARSIZE = 1; LSTR LANGUAGE = _UxGT("Dutch"); LSTR WELCOME_MSG = MACHINE_NAME _UxGT(" gereed."); LSTR MSG_BACK = _UxGT("Terug"); LSTR MSG_MEDIA_INSERTED = _UxGT("Kaart ingestoken"); LSTR MSG_MEDIA_REMOVED = _UxGT("Kaart verwijderd"); LSTR MSG_LCD_ENDSTOPS = _UxGT("Endstops"); // Max length 8 characters LSTR MSG_MAIN = _UxGT("Hoofdmenu"); LSTR MSG_RUN_AUTO_FILES = _UxGT("Autostart"); LSTR MSG_DISABLE_STEPPERS = _UxGT("Motoren uit"); LSTR MSG_DEBUG_MENU = _UxGT("Debug Menu"); // accepted English terms LSTR MSG_PROGRESS_BAR_TEST = _UxGT("Vooruitgang Test"); LSTR MSG_LEVEL_BED_WAITING = _UxGT("Klik voor begin"); LSTR MSG_LEVEL_BED_NEXT_POINT = _UxGT("Volgende Plaats"); LSTR MSG_LEVEL_BED_DONE = _UxGT("Bed level kompl."); LSTR MSG_SET_HOME_OFFSETS = _UxGT("Zet home offsets"); LSTR MSG_HOME_OFFSETS_APPLIED = _UxGT("H offset toegep."); #if HAS_PREHEAT LSTR MSG_PREHEAT_1 = PREHEAT_1_LABEL _UxGT(" voorverwarmen"); LSTR MSG_PREHEAT_1_H = PREHEAT_1_LABEL _UxGT(" voorverw. ~"); LSTR MSG_PREHEAT_1_END = PREHEAT_1_LABEL _UxGT(" voorverw. Einde"); LSTR MSG_PREHEAT_1_END_E = PREHEAT_1_LABEL _UxGT(" voorverw. Einde ~"); LSTR MSG_PREHEAT_1_ALL = PREHEAT_1_LABEL _UxGT(" voorverw. aan"); LSTR MSG_PREHEAT_1_BEDONLY = PREHEAT_1_LABEL _UxGT(" voorverw. Bed"); LSTR MSG_PREHEAT_1_SETTINGS = PREHEAT_1_LABEL _UxGT(" verw. conf"); LSTR MSG_PREHEAT_M = _UxGT("$ voorverwarmen"); LSTR MSG_PREHEAT_M_H = _UxGT("$ voorverw. ~"); LSTR MSG_PREHEAT_M_END = _UxGT("$ voorverw. Einde"); LSTR MSG_PREHEAT_M_END_E = _UxGT("$ voorverw. Einde ~"); LSTR MSG_PREHEAT_M_ALL = _UxGT("$ voorverw. aan"); LSTR MSG_PREHEAT_M_BEDONLY = _UxGT("$ voorverw. Bed"); LSTR MSG_PREHEAT_M_SETTINGS = _UxGT("$ verw. conf"); #endif LSTR MSG_COOLDOWN = _UxGT("Afkoelen"); LSTR MSG_SWITCH_PS_ON = _UxGT("Stroom aan"); LSTR MSG_SWITCH_PS_OFF = _UxGT("Stroom uit"); LSTR MSG_EXTRUDE = _UxGT("Extrude"); LSTR MSG_RETRACT = _UxGT("Retract"); LSTR MSG_MOVE_AXIS = _UxGT("As verplaatsen"); LSTR MSG_BED_LEVELING = _UxGT("Bed Leveling"); LSTR MSG_LEVEL_BED = _UxGT("Level bed"); LSTR MSG_MOVING = _UxGT("Verplaatsen..."); LSTR MSG_FREE_XY = _UxGT("Vrij XY"); LSTR MSG_MOVE_X = _UxGT("Verplaats X"); LSTR MSG_MOVE_Y = _UxGT("Verplaats Y"); LSTR MSG_MOVE_Z = _UxGT("Verplaats Z"); LSTR MSG_MOVE_E = _UxGT("Extruder"); LSTR MSG_MOVE_EN = _UxGT("Extruder *"); LSTR MSG_MOVE_N_MM = _UxGT("Verplaats $mm"); LSTR MSG_MOVE_01MM = _UxGT("Verplaats 0.1mm"); LSTR MSG_MOVE_1MM = _UxGT("Verplaats 1mm"); LSTR MSG_MOVE_10MM = _UxGT("Verplaats 10mm"); LSTR MSG_MOVE_100MM = _UxGT("Verplaats 100mm"); LSTR MSG_SPEED = _UxGT("Snelheid"); LSTR MSG_BED_Z = _UxGT("Bed Z"); LSTR MSG_NOZZLE = _UxGT("Nozzle"); LSTR MSG_NOZZLE_N = _UxGT("Nozzle ~"); LSTR MSG_BED = _UxGT("Bed"); LSTR MSG_FAN_SPEED = _UxGT("Fan snelheid"); LSTR MSG_FAN_SPEED_N = _UxGT("Fan snelheid ~"); LSTR MSG_FLOW = _UxGT("Flow"); LSTR MSG_FLOW_N = _UxGT("Flow ~"); LSTR MSG_CONTROL = _UxGT("Control"); LSTR MSG_MIN = " " LCD_STR_THERMOMETER _UxGT(" Min"); LSTR MSG_MAX = " " LCD_STR_THERMOMETER _UxGT(" Max"); LSTR MSG_FACTOR = " " LCD_STR_THERMOMETER _UxGT(" Fact"); LSTR MSG_AUTOTEMP = _UxGT("Autotemp"); LSTR MSG_LCD_ON = _UxGT("Aan"); LSTR MSG_LCD_OFF = _UxGT("Uit"); LSTR MSG_SELECT = _UxGT("Selecteer"); LSTR MSG_SELECT_E = _UxGT("Selecteer *"); LSTR MSG_ACC = _UxGT("Versn"); LSTR MSG_TEMPERATURE = _UxGT("Temperatuur"); LSTR MSG_MOTION = _UxGT("Beweging"); LSTR MSG_FILAMENT = _UxGT("Filament"); LSTR MSG_ADVANCE_K = _UxGT("Advance K"); // accepted english dutch LSTR MSG_ADVANCE_K_E = _UxGT("Advance K *"); // accepted english dutch LSTR MSG_VOLUMETRIC_ENABLED = _UxGT("E in mm") SUPERSCRIPT_THREE; LSTR MSG_FILAMENT_DIAM = _UxGT("Fil. Dia."); LSTR MSG_FILAMENT_DIAM_E = _UxGT("Fil. Dia. *"); LSTR MSG_CONTRAST = _UxGT("LCD contrast"); LSTR MSG_STORE_EEPROM = _UxGT("Geheugen opslaan"); LSTR MSG_LOAD_EEPROM = _UxGT("Geheugen laden"); LSTR MSG_RESTORE_DEFAULTS = _UxGT("Noodstop reset"); LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("Ververs"); LSTR MSG_INFO_SCREEN = _UxGT("Info scherm"); LSTR MSG_PREPARE = _UxGT("Voorbereiden"); LSTR MSG_TUNE = _UxGT("Afstellen"); LSTR MSG_PAUSE_PRINT = _UxGT("Print pauzeren"); LSTR MSG_RESUME_PRINT = _UxGT("Print hervatten"); LSTR MSG_STOP_PRINT = _UxGT("Print stoppen"); LSTR MSG_MEDIA_MENU = _UxGT("Print van SD"); LSTR MSG_NO_MEDIA = _UxGT("Geen SD kaart"); LSTR MSG_DWELL = _UxGT("Slapen..."); LSTR MSG_USERWAIT = _UxGT("Wachten..."); LSTR MSG_PRINT_ABORTED = _UxGT("Print afgebroken"); LSTR MSG_NO_MOVE = _UxGT("Geen beweging."); LSTR MSG_KILLED = _UxGT("Afgebroken. "); LSTR MSG_STOPPED = _UxGT("Gestopt. "); LSTR MSG_CONTROL_RETRACT = _UxGT("Retract mm"); // accepted English term in Dutch LSTR MSG_CONTROL_RETRACT_SWAP = _UxGT("Ruil Retract mm"); LSTR MSG_CONTROL_RETRACTF = _UxGT("Retract F"); LSTR MSG_CONTROL_RETRACT_ZHOP = _UxGT("Hop mm"); LSTR MSG_CONTROL_RETRACT_RECOVER = _UxGT("Unretr. mm"); LSTR MSG_CONTROL_RETRACT_RECOVER_SWAP = _UxGT("Ruil Unretr. mm"); LSTR MSG_CONTROL_RETRACT_RECOVERF = _UxGT("Unretr. FR"); LSTR MSG_AUTORETRACT = _UxGT("Auto-Retract"); LSTR MSG_FILAMENTCHANGE = _UxGT("Verv. Filament"); LSTR MSG_FILAMENTCHANGE_E = _UxGT("Verv. Filament *"); LSTR MSG_ATTACH_MEDIA = _UxGT("Init. SD kaart"); LSTR MSG_CHANGE_MEDIA = _UxGT("Verv. SD Kaart"); LSTR MSG_ZPROBE_OUT = _UxGT("Z probe uit. bed"); LSTR MSG_BLTOUCH_SELFTEST = _UxGT("BLTouch Zelf-Test"); LSTR MSG_BLTOUCH_RESET = _UxGT("Reset BLTouch"); LSTR MSG_HOME_FIRST = _UxGT("Home %s%s%s Eerst"); LSTR MSG_ZPROBE_ZOFFSET = _UxGT("Z Offset"); // accepted English term in Dutch LSTR MSG_BABYSTEP_X = _UxGT("Babystap X"); LSTR MSG_BABYSTEP_Y = _UxGT("Babystap Y"); LSTR MSG_BABYSTEP_Z = _UxGT("Babystap Z"); LSTR MSG_BABYSTEP_N = _UxGT("Babystap @"); LSTR MSG_ENDSTOP_ABORT = _UxGT("Endstop afbr."); LSTR MSG_HEATING_FAILED_LCD = _UxGT("Voorverw. fout"); LSTR MSG_ERR_REDUNDANT_TEMP = _UxGT("Redun. temp fout"); LSTR MSG_THERMAL_RUNAWAY = _UxGT("Therm. wegloop"); LSTR MSG_ERR_MAXTEMP = _UxGT("Err: Max. temp"); LSTR MSG_ERR_MINTEMP = _UxGT("Err: Min. temp"); LSTR MSG_HALTED = _UxGT("PRINTER GESTOPT"); LSTR MSG_PLEASE_RESET = _UxGT("Reset A.U.B."); LSTR MSG_HEATING = _UxGT("Voorwarmen..."); LSTR MSG_BED_HEATING = _UxGT("Bed voorverw..."); LSTR MSG_DELTA_CALIBRATE = _UxGT("Delta Calibratie"); LSTR MSG_DELTA_CALIBRATE_X = _UxGT("Kalibreer X"); LSTR MSG_DELTA_CALIBRATE_Y = _UxGT("Kalibreer Y"); LSTR MSG_DELTA_CALIBRATE_Z = _UxGT("Kalibreer Z"); LSTR MSG_DELTA_CALIBRATE_CENTER = _UxGT("Kalibreer Midden"); LSTR MSG_DELTA_AUTO_CALIBRATE = _UxGT("Auto Calibratie"); LSTR MSG_DELTA_HEIGHT_CALIBRATE = _UxGT("Zet Delta Hoogte"); LSTR MSG_CASE_LIGHT = _UxGT("Case licht"); LSTR MSG_KILL_EXPECTED_PRINTER = _UxGT("Onjuiste printer"); #if LCD_WIDTH >= 20 || HAS_DWIN_E3V2 LSTR MSG_INFO_PRINT_COUNT = _UxGT("Printed Aantal"); LSTR MSG_INFO_COMPLETED_PRINTS = _UxGT("Totaal Voltooid"); LSTR MSG_INFO_PRINT_TIME = _UxGT("Totale Printtijd"); LSTR MSG_INFO_PRINT_LONGEST = _UxGT("Langste Printtijd"); LSTR MSG_INFO_PRINT_FILAMENT = _UxGT("Totaal Extrudeert"); #else LSTR MSG_INFO_PRINT_COUNT = _UxGT("Aantal"); LSTR MSG_INFO_COMPLETED_PRINTS = _UxGT("Voltooid"); LSTR MSG_INFO_PRINT_TIME = _UxGT("Printtijd "); LSTR MSG_INFO_PRINT_LONGEST = _UxGT("Langste"); LSTR MSG_INFO_PRINT_FILAMENT = _UxGT("Extrud."); #endif LSTR MSG_INFO_MIN_TEMP = _UxGT("Min Temp"); LSTR MSG_INFO_MAX_TEMP = _UxGT("Max Temp"); LSTR MSG_INFO_PSU = _UxGT("PSU"); // accepted English term in Dutch LSTR MSG_DRIVE_STRENGTH = _UxGT("Motorstroom"); LSTR MSG_DAC_EEPROM_WRITE = _UxGT("DAC Opslaan"); LSTR MSG_FILAMENT_CHANGE_OPTION_RESUME = _UxGT("Hervat print"); LSTR MSG_FILAMENT_CHANGE_NOZZLE = _UxGT(" Nozzle: "); // accepted English term // // Filament Change screens show up to 3 lines on a 4-line display // ...or up to 2 lines on a 3-line display // #if LCD_HEIGHT >= 4 // Up to 3 lines LSTR MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_3_LINE("Wacht voor start", "filament te", "verwisselen")); LSTR MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_3_LINE("Wacht voor", "filament uit", "te laden")); LSTR MSG_FILAMENT_CHANGE_HEAT = _UxGT(MSG_2_LINE("Klik knop om...", "verw. nozzle.")); //nozzle accepted English term LSTR MSG_FILAMENT_CHANGE_HEATING = _UxGT(MSG_2_LINE("Nozzle verw.", "Wacht a.u.b.")); LSTR MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_3_LINE("Laad filament", "en druk knop", "om verder...")); LSTR MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_3_LINE("Wacht voor", "filament te", "laden")); LSTR MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_3_LINE("Wacht voor print", "om verder", "te gaan")); #else // Up to 2 lines LSTR MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_2_LINE("Wacht voor", "start...")); LSTR MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_2_LINE("Wacht voor", "uitladen...")); LSTR MSG_FILAMENT_CHANGE_HEAT = _UxGT(MSG_2_LINE("Klik knop om...", "verw. nozzle.")); //nozzle accepted English term LSTR MSG_FILAMENT_CHANGE_HEATING = _UxGT(MSG_1_LINE("Verwarmen...")); LSTR MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_2_LINE("Laad filament", "en druk knop")); LSTR MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_2_LINE("Wacht voor", "inladen...")); LSTR MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_2_LINE("Wacht voor", "printing...")); #endif }