Marlin_FB4S

Commit Graph

Author	SHA1	Message	Date
Scott Lahteine	2908e76151	Fix position_is_reachable_by_probe typo, add comment Fix #10029	7 years ago
Scott Lahteine	6d9ea7e184	Fix position_is_reachable_by_probe typo, add comment Fix #10029	7 years ago
Scott Lahteine	161ff9ff35	Fix UPDATE_ENDSTOP for CorePQ compatibility Fixes #9939	7 years ago
Scott Lahteine	49ca67202f	Patch configuration_store for extra serial port Fix #9948	7 years ago
Scott Lahteine	16a8edc5f0	Add more delay before pulse off in Linear Advance ISR A capital idea from https://github.com/MarlinFirmware/Marlin/pull/9914#issuecomment-371614153	7 years ago
Scott Lahteine	dfd5d2fe75	Have position_is_reachable_by_probe use the whole bed (#10020 ) Previously `position_is_reachable_by_probe` was limited to the area specified for `G29` mesh leveling (even if leveling was disabled). This change will properly consider the entire bed area so that `G30` and other non-leveling probing may take place.	7 years ago
Scott Lahteine	3c2bfa5e53	Update powersupply_on in power_on/off (#10015 ) Fix #10004	7 years ago
Scott Lahteine	8d32fd997f	Wrap NORM_E_DIR/REV_E_DIR macros in do{}while(0)	7 years ago
Scott Lahteine	98d48fc731	Followup to HAL_timer_restrain Followup to #9985	7 years ago
Chris Pepper	a1a88ebabc	HAL function to ensure min stepper interrupt interval (#9985 )	7 years ago
Scott Lahteine	9515e5aefb	Fix LA_active_extruder (static)	7 years ago
Scott Lahteine	e5ec793f7e	Wrap stepper indirection macros	7 years ago
Sebastianv650	5b85464791	Fix for LA (#9964 ) Missed in the original LA 1.5 PR: eISR has to use a local copy of current_block->use_advance_lead because it might still run wenn the last block has been set to NULL.	7 years ago
Scott Lahteine	ffbf63e6af	Add HAS_TEMP_SENSOR conditional	7 years ago
Scott Lahteine	2057177184	Make enums into implicit char	7 years ago
Scott Lahteine	ca0def766e	LIN_ADVANCE single stepper optimization	7 years ago
Scott Lahteine	8291ae34f2	Support duplication mode in LIN_ADVANCE	7 years ago
Scott Lahteine	0dd1c4458d	Put more code between pulse start and stop (#9959 )	7 years ago
Scott Lahteine	36262a0479	Use static classes for job timers (#9938 )	7 years ago
Scott Lahteine	930720bbbb	Fix broken reverse planner (#9943 ) From #9914 by @Sebastianv650	7 years ago
Bob-the-Kuhn	025118da3e	Init print_job_timer in setup() instead of "early" (#9937 )	7 years ago
Scott Lahteine	07ae23fe14	No pulse delay on last e_steps in advance isr	7 years ago
Scott Lahteine	ed758de80d	tweak comment in stepper.cpp	7 years ago
Scott Lahteine	d1dc863962	autotemp_factor is not value_celsius_diff See https://github.com/MarlinFirmware/Marlin/issues/9852#issuecomment-369861822	7 years ago
Thomas Moore	f3914a432e	Clear retracted status when homing the Z axis	7 years ago
Scott Lahteine	6d7f4f84e2	Add board MKS_BASE_HEROIC (#9926 ) Followup to #9008 - Don't define micro-stepping pins for boards that lack them. - Allow setting of 128 microsteps with `M350`.	7 years ago
Scott Lahteine	649f375494	Fix: M112 calling kill from interrupt (#9923 ) Fix #9906	7 years ago
Studiodyne	23a576faf7	[2.0] Fix for FW retract (#9878 )	7 years ago
Scott Lahteine	91db7930dc	Drop SCARA_FEEDRATE_SCALING The updated planner takes the length of the move, so this pre-calculation is no longer needed.	7 years ago
Scott Lahteine	1746749361	Followup to #9868	7 years ago
Scott Lahteine	a446433c87	Fix SENSORLESS_HOMING for Core Kinematics (#9868 )	7 years ago
Zachary Hill	c22f8dd660	Get duration_t in printcounter.h for its clients (#9843 )	7 years ago
Scott Lahteine	966d9af98a	Mesh export in Bilinear + UBL M503	7 years ago
Scott Lahteine	8d5a77001e	EEPROM parity with 1.1.x	7 years ago
Sebastianv650	cb4cb86d80	Useless line removed (#9814 ) nextAdvanceISR is set in the next if structure in every possible situation, so it's useless to set it once more before.	7 years ago
Scott Lahteine	0557ab5780	Fix CONFIG_ECHO_START bug In reference to #9633	7 years ago
UtterlyD	813f9f3082	[bugfix_2.0.x] - LIN_ADVANCE V1.5 stepper.cpp (#9797 ) Removal of obsolete (i) from port of LIN_ADVANCE from V1.1.x to V2..0.x.	7 years ago
Scott Lahteine	3f89bbeab5	Drop a conditional only used once	7 years ago
Scott Lahteine	689bc99402	Correction to acceleration	7 years ago
Scott Lahteine	2bd252b501	[2.0.x] LIN_ADVANCE v1.5 (#9712 )	7 years ago
Scott Lahteine	2c9775313a	Fix Z position on HD44780 Fix #9732	7 years ago
teemuatlut	5968a3e60e	Add ADVANCED_PAUSE_FEATURE include	7 years ago
Scott Lahteine	73cd34b121	Finish AUTO_POWER_CONTROL implementation Followup to #9503	7 years ago
Scott Lahteine	b3deadd898	Don't raise FIX_MOUNTED_PROBE on stow Reference #9336	7 years ago
Scott Lahteine	3d1692d1fd	Fix X2 enable with X_DUAL_STEPPER_DRIVERS From #9286	7 years ago
Scott Lahteine	c241da32e8	stepper.h parity with 1.1.x	7 years ago
Scott Lahteine	ca55f2927a	Pulldown pin mode support (#9701 ) Implemented for LPC1768.	7 years ago
Scott Lahteine	83d7e95de0	Add MSG_THERMAL_RUNAWAY_BED (#9691 )	7 years ago
Scott Lahteine	472229b974	Fix #9681	7 years ago
Scott Lahteine	03d790451f	[2.0.x] HAL timer set/get count => set/get compare (#9581 ) To reduce confusion over the current timer count vs. the compare (aka "top") value. Caution: this re-uses the function name, changing its meaning.	7 years ago

1 2 3 4 5 ...

424 Commits (fe5c308872f573790bb75edd2d7a1b592611bb13)