da6a094424
Sanity-check inverting and pullups for Z probe and Z endstop
`Z_MIN_ENDSTOP_INVERTING` must match `Z_MIN_PROBE_ENDSTOP_INVERTING`
when using `Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN`.
This is easy to overlook.
8 years ago
aa241c63b3
Include M205 note in configurations
8 years ago
d7b948610a
Experimental bilinear subdivision option
8 years ago
d5bf1684fe
Implement as optional feature LCD_DECIMAL_SMALL_XY
And reduce the function size to simplify
8 years ago
3391c785c6
Support for distinct E factors
8 years ago
f60b4f8659
Allow case light pin to be active low
8 years ago
0909cf3d46
Adjust spacing
8 years ago
65c50e062e
Support for an RGB LED using 3 pins
8 years ago
f674246397
extend Configurations files
8 years ago
f62f4006af
Account for LCD improvements in ENSURE_SMOOTH_MOVES
.. and give the hint to try lower values if possible.
8 years ago
5460a529da
Add option DOGM_SPI_DELAY_US
8 years ago
f6f77d34a1
Add a fade factor for mesh leveling
8 years ago
ef97645002
Follow-up the PR #5255 (Case light menu (3rd attempt))
8 years ago
4e4f37b6c2
Code formatting for TMC and L6470 config options
8 years ago
bf5f5f44cc
Make TMC2130 init code auto-configure
Simply apply enabled settings instead of requiring users to edit
stepper_indirection.cpp
8 years ago
d67c1d825f
Add TMC2130 support
8 years ago
072541f286
Update ENSURE_SMOOTH_MOVES in all configs
8 years ago
eb714ee873
Move dummy thermistor opts, fix redundant sensor comment
8 years ago
7a99c6ce4f
Reformat temp sensor listing
8 years ago
eb120e518c
Followup to new endstop interrupts feature
- Fix typos, verbiage
- Fix naming of `setup_endstop_interrupts`
- Some formatting, indentation, spacing
8 years ago
d7ce5d271b
Replace const bool with #define for consistency
8 years ago
f3eee02596
Introduce endstop interrupts
If ENDSTOP_INTERRUPTS_FEATURE is enabled this tries to set up interrupt routines
for all used endstop pins. If this worked without errors, `endstops.update()` is called
only if one of the endstops changed its state.
The new interrupt routines do not really check the endstops and react upon them. All what they
do, is to set a flag if it makes sense to call the endstop test we are used to.
This can be used on:
* ARM (DUE) based boards - all pins can raise interrupts,
* RAMPS - all 6 endstop pins plus some other on EXT-2 can raise interrupts,
* RAMPS based boards - as long the designers did not change the pins for the endstops or at least left enough,
* all boards, if there are enough pins that can raise interrupts, and you are willing/able to swap with pins dedicated to other purpose.
8 years ago
3c9a838651
Extended capabilities report in M115
8 years ago
68b866b5dd
Add M155 - Auto-report temperature with interval
8 years ago
75bfde9945
M155=>M260, M156=>M261
8 years ago
2ae72b0491
Follow up the PR #5167 (Add Turkish Language) again, etc
・Update forgotten K8400\Dual-head\Configuration.h
・Adjust spacing
8 years ago
e3c8318504
Add reversed CORE options
8 years ago
2327764980
Add Turkish Language
8 years ago
2495ab7af2
Make dual_x_carriage_mode an enumeration
8 years ago
ab3f966f5f
Case light G-code M355
implemented G-Code M355 into Marlin
8 years ago
b6aa894893
Rename auto fan pins and add auto fan flags
8 years ago
14e60f0d3b
Correct typo in configs
As pointed out by #5044
8 years ago
b9109b2875
Improve LIN_ADVANCE commentary (all configs)
8 years ago
4f6bfabaad
Patch BAUDRATE line in configs
8 years ago
1e551c0688
Revert "Squashed - Removal of PID functional range"
8 years ago
a0df34fd4c
Add PINS_DEBUGGING advanced config option
8 years ago
5f5d87cad3
Update Configuration.h
8 years ago
d19cfcfc1d
max_jerk array, DEFAULT_XYJERK => DEFAULT_[XY]JERK
8 years ago
0d538f3db6
Add to all configurations
8 years ago
fffc9fefa8
Apply changes to all configs
8 years ago
2d2c9bdf92
Add PROBE_Y_FIRST option for probe order
8 years ago
92c03a44a9
Fix the PR #4899 (ABL: Enable by type. Bilinear for all.) etc.
About Configuration.h:
・Fix the PR #4899 (ABL: Enable by type. Bilinear for all.)
Remove Duplicated contents
・Fix the PR #4305 (Custom boot screen feature improvement)
Revert from "during boot" to "during bootup" in all the example
Configuration.h
・Fix the PR #4207 (Clean up, simplify and generalize the Allen-key-probe
code.)
Resolve and relocate the duplicated definitions in Z_PROBE_ALLEN_KEY
section
・Follow-up the PR #4805 (Additional documentation of Configuration.h)
Add forgotten changes to all the example Configuration.h
Adjust spacing
About Configuration_adv.h:
Add missing description of SLOWDOWN for DELTA
Adjust spacing
8 years ago
ea0dbee3c9
Enable ABL by type, support bilinear on cartesian
8 years ago
01f1028510
Try on "CLEARANCE" for size
8 years ago
0e7d638a7a
Revert to Probe Raise rather than Probe Height
8 years ago
e05af606a8
Clean up probe config options
8 years ago
c4dcfa254e
Allow override of Z_ENDSTOP_SERVO_NR with BLTOUCH
8 years ago
e5505e3b33
Allow non-square leveling grid
8 years ago
a1812b55f6
Space out array values
8 years ago
d4599fd8ed
Comment patches to Configuration.h
8 years ago
Scott Lahteine
akaJes
esenapaj
jes
Sebastianv650
Moritz
Petr Zahradník junior
AnHardt
Rigid3D
Stanley
Scott Lahteine
Rerouter