Tree: e7b40bbe98

FB4S_WIFI

FBG5_WIFI

MKS_UI

vanilla_fb_2.0.x

2.0.7.2

2.0.7.2_upd

2.0.8.1

2.0.9.1

2.0.9.2

2.0.9.3

Branches Tags

${ item.name }

Create tag ${ searchTerm }

Create branch ${ searchTerm }

from 'e7b40bbe98'

${ noResults }

Commit Graph

3861 Commits (e7b40bbe988927a84d6f76eb1a2294bc09e704c4)

 

All Branches   

Search

Author	SHA1	Message	Date
Scott Lahteine	3b2b2313ff	Combine if block related to SERVO_ENDSTOPS	9 years ago
Scott Lahteine	0af2a80e06	Make SERVO_ENDSTOP_ANGLES 2-dimensional	9 years ago
Richard Wackerbarth	525d0dc239	Configurator is out-of-date AGAIN (PR#2550)	9 years ago
Richard Wackerbarth	67c4d22984	Update Developer References	9 years ago
Richard Marko	dd22cbbfb8	makefile: add buzzer.cpp (PR#2479)	9 years ago
Scott Lahteine	9f48798ffd	Replace ENABLED with DEFINED for SERVO_ENDSTOPS (PR#2542)	9 years ago
Scott Lahteine	22b9fd97b2	Remove usage restriction to comply with GPL Discussion at #2541	9 years ago
Richard Wackerbarth	3c1653207c	Merge Memory Watcher (PR#2398)	9 years ago
Richard Wackerbarth	ae00fad75b	Rename as M100	9 years ago
Richard Wackerbarth	a401d738df	There is an echo in here	9 years ago
Richard Wackerbarth	ed7d45e8f5	Memory watcher	9 years ago
AnHardt	d17f7ebc8a	Multiply WATCH_TEMP_PERIOD by 1000UL (PR#2535) instead of 1000. Else we get errors with times over 32 seconds.	9 years ago
Scott Lahteine	bea6739774	Don't include Z_RAISE_AFTER_PROBING if not used (PR#2527)	9 years ago
Scott Lahteine	81bba7ed88	More sanity checking for extruder requirements (PR#2531)	9 years ago
Richard Wackerbarth	78b7c486fd	Merge Translate additional Displays (PR#2529)	9 years ago
AnHardt	87a97f3724	Fix conditions for display strings	9 years ago
AnHardt	aaccea0260	Shift some display only strings from language.h to lenguage_en.h and translate them to German.	9 years ago
Scott Lahteine	e4c01f1c7e	Simplify init with ARRAY_BY_EXTRUDERS1 macro (PR#2507)	9 years ago
Scott Lahteine	ab6f1fdf8b	Move & document ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED (PR#2528) As suggested in #2521 - Move `ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED` because `SDSUPPORT` is also required. - Add a note that endstops must be enabled for the feature to have any effect	9 years ago
Richard Wackerbarth	096046c09f	Merge Improve Makefile use of avrdude (PR#2477)	9 years ago
Richard Marko	1183c10a2e	makefile: drop -q -q (much quiet) from avrdude flags Annoying when trying to figure out if uploading actually does something.	9 years ago
Richard Marko	0e064357f4	makefile: use /etc/avrdude/avrdude.conf on linux No need to look for arduino specific avrdude configuration as distributions ship their own avrdude.conf file that is compatible with arduino.	9 years ago
Richard Wackerbarth	960de3411b	Merge Temp Sanity Checks (PR#2514)	9 years ago
Scott Lahteine	bcb7d5a149	Improve sanitycheck for TEMP_SENSOR_1	9 years ago
Scott Lahteine	5b24f59401	Add sanity checks for temp sensors	9 years ago
AnHardt	fd0e81b0c7	Distinguish between BUZZER and SPEAKER (PR#2513) A speaker needs a AC or a pulsed DC to make a sound, a buzzer only needs a DC. A buzzer has it's own resonator. It works in most cases to feed the buzzer with a pulsed DC, but the sound will not be as loud as with pure DC. There seem to be boards where the BEEPER-pin is not able to handle a PWM. Obviously intended for a buzzer. To make these board able to handle a speaker * replace the PWM based tone()-function again with a on-delay-off-delay loop. Hopefully the last time I touch the beeper code.	9 years ago
Richard Wackerbarth	53d9c9ff23	Merge G29 Ending Position (PR#2498)	9 years ago
Scott Lahteine	e2957df05c	Shorthand for do_blocking_move_to	9 years ago
Scott Lahteine	819c5b9b50	Adjust comment on Z adjustment	9 years ago
Scott Lahteine	5a7356b6fc	Patch for G29 final Z position Include all the necessary pieces to get the final Z position after probing the bed, and add commentary about other possible changes.	9 years ago
Richard Wackerbarth	d233976737	Merge Servo Corrections (PR#2510)	9 years ago
AnHardt	088e09e052	Add forgotten Marlin_main.cpp	9 years ago
AnHardt	8b876241bd	Some more servo code tweaks Just set up the pin. Don't move to a random position. Simplify servo::move() * servo::move() does not need the pin parameter - The pin is set during servo_init() with attach(). * servo::move() does not need a return value. SERVO_LEVELING is the wrong condition to deactivate the servos. Remove some temporary (Servo *) variables. SanityCheck for the servo indexes.	9 years ago
Scott Lahteine	b116c096bd	Reduce set_homing_bump_feedrate, save 42 bytes (PR#2512) Updates to `set_homing_bump_feedrate`: - Move the string into Program Memory, reduce length by 31 bytes - Use an auto to get the divisor, adjust it on error - Set feedrate once, at the end	9 years ago
Scott Lahteine	f7e7862588	Better Sanguinololu & Graphical Controller (PR#2504) - Change suggested at https://github.com/MarlinFirmware/Marlin/issues/2482#issuecomment-123553 266	9 years ago
Scott Lahteine	a1154d4a20	Enable Y and sanity-check CoreXZ (PR#2509)	9 years ago
Richard Wackerbarth	0a7f2a8be7	Merge MegaController & MINIPANEL (PR#2508)	9 years ago
Scott Lahteine	932f1c109e	Move servos to the top in pins_MEGACONTROLLER.h	9 years ago
Scott Lahteine	90f8ddfc1e	Apply MINIPANEL to other configs	9 years ago
AndySze	00dbf69b6d	add MINIPANEL defines	9 years ago
AndySze	8ac5e56934	fixed some format problems and cleaned code	9 years ago
AndySze	eef595aa64	add makerlab mega controller pin configs	9 years ago
Richard Wackerbarth	a0120a533c	Merge CORE_XZ (PR#2503)	9 years ago
AnHardt	4e14e152fa	Add Travis tests for CORXY and COREXZ	9 years ago
AnHardt	27d7d2ccab	Correct bracketing for COREXY-XZ	9 years ago
Scott Lahteine	469843427d	Reduce code in gcode_M81 (PR#2497)	9 years ago
Scott Lahteine	c66955aaf9	Mark unchanging arrays as const (PR#2494) The compiler may be able to optimize if it knows an array won’t be changing.	9 years ago
Richard Wackerbarth	72b9e3a6ac	Merge Configuration Macros (PR#2495)	9 years ago
Scott Lahteine	278aa15301	Add COUNT macro and apply	9 years ago
Scott Lahteine	d85861d296	Move macros, add ENABLED/DISABLED, add includes	9 years ago