3cf59f6f9a
add RepRapPro Huxley thermistor tables
12 years ago
86358dd6cd
Panelolu pin assignment for sanguinololu from http://reprap.org/wiki/Panelolu
12 years ago
0f3f5d083d
Minor cleanup of the new FAN_KICKSTART code. #334
12 years ago
3d91bd486c
Add "kick fan" feature - briefly run fan at full speed on start.
Add a feature to run the cooling fan at full speed for a small period
(default 100ms) when first starting the fan. Some fans wont reliably
start spinning at low power, and many fans have issue with the PWM at
low power. However, once the fan starts spinning it can reliably be
set to a wide range of PWM values.
12 years ago
3f2f94ef28
Be consistent in setting of the fan PWM.
Always set the FAN PWM value in check_axes_activity() and always use
the value of the active move if a move is active.
12 years ago
7f30039d2a
+ Finnish translation
12 years ago
bbe7d3d0fe
Fixed #312
12 years ago
9c34c4f05b
fixes for ramps compilation using installed arduino ide
12 years ago
442ade15a6
Move Gen6 stuff into a proper location.
12 years ago
8b88e3b386
Fixed #345 , Fixed #267 .
12 years ago
921273baa0
Added optional feature to stop printing when an endstop is hit. Made the Z display on the LCD in 3.2 format instead of 3.1. Added LCD message when and endstop is hit.
12 years ago
7d20ec706e
Added libraries from Arduino 1.0.3 for sanguino build
12 years ago
437eb3bafc
Initialize PS_ON at startup
12 years ago
f3c1fc70a9
Power signal control definitions for ATX and others
12 years ago
dad7691df9
makefile for sanguino standalone compilation
12 years ago
6752cb2d9c
PID now per extruder. Fixed typo
12 years ago
0ac452e252
Disable is now multi extruder compatible. M84 got a T option.
12 years ago
9e7b5056a0
{X,Y,Z}_{MIN,MAX}_POS are actually in Gcode coordinates.
12 years ago
5f82f03ff3
Add italian MSG_RESUMING.
12 years ago
5e3873c8db
Add german MSG_RESUMING.
12 years ago
01aac2a142
Small changes on the LCD panel, let the speed control work better, line up the parameter edit the same as the menu, remove some unused defines, and remove the Z from the 10mm move menu.
12 years ago
b69cb9fbd9
Change the end of SD cart print message from minutes/seconds to hours/minutes.
12 years ago
38ee395ac7
Replace the 1ms delay for 2 nops to get a 100ns delay. #259
12 years ago
a95dcd74e7
Fix some of the duplicated PSTRs, saving 500bytes of flash with LCD on.
12 years ago
8caf5d252d
Remove bogus blank line.
12 years ago
1c2ecddae4
Fix typo (# missing before define).
12 years ago
6dfb8a2187
Fix home_all_axis to make QUICK_HOME work with Repetier-Host which sends G28 X0 Y0 Z0 instead of G28. Thanks to Matt Schoenholz for reporting this issue.
12 years ago
b39f5d614a
For boards with only one endstop per axis, automatically set *_MIN_PIN and *_MAX_PIN according to *_HOME_DIR.
12 years ago
ab09fa4bbf
fixed pwm generation at pin D12 and D13 when one of them is used as FAN_PIN on Sanguino, added soft pwm entry for FAN_PIN in temperature.cpp
12 years ago
5697451c72
fix lcd class
12 years ago
58e806f3fa
Fix the russial translation.
12 years ago
50a5ce1dc4
deduplicate messages
12 years ago
6123a00e64
Fix the german translation.
12 years ago
7c21716886
Fixed #341
12 years ago
596a7e1904
Fix compiling for Arduin < 1.0.0
12 years ago
b264317fa0
Reverted the patch by KevinOConnor, as it crashes some versions of avr-gcc and caused linking issues.
12 years ago
23022f1a82
Updates to Makefile to compile for Teensy.
12 years ago
08356361ac
Fixing a problem with heated beds not working without PID and BED_LIMIT_SWITCHING
12 years ago
047d037f8c
#ifdef fix for #326
12 years ago
0908458381
Use gcc "-fwhole-program" optimization.
Use "whole program" and "link time optimization" features of gcc. The
whole-program optimization enables the compiler to evaluate the entire
firmware for optimization instead of just one code file at a time.
This leads to better overall optimizations.
12 years ago
16fbb455ef
Use linker "--relax" option.
The "relax" option enables the linker to convert certain "call"
instructions to the smaller "rcall" instruction. This reduces the
size of the resulting binary.
12 years ago
f30b46b2a8
One more fix for #338 , I really should get a heated bed to test with.
12 years ago
65c3f1ffcd
Most likely fixing #338
12 years ago
7577717b59
Fixed #336
12 years ago
1a8f54cea1
The big LCD code update. This splits the display and menu implementation. Paving the way for future different displays. It also makes it easier to modify the menu structures while keeping everything consistant. Note that this most likely breaks the translations, which need to be updated.
12 years ago
6731c094ee
Fix compiling with just an 16x2 LCD and no buttons.
12 years ago
b99a928a80
Fix the M117 (display message on LCD) when used over USB with checksums.
12 years ago
55ba90ac19
Add PID functional range setting. With high powered heaters the current functional range of 10 degrees causes high overshoots as the PID needs to kick in before the temperature hits 10 degrees below target.
12 years ago
5ff5cee8ce
Fix the sensitive pin definitions, there where analogue numbers in the digital pin list. Also made M42 without a P function on the LED_PIN (which was otherwise a useless pin definition)
12 years ago
ca409e5531
Fix X/Y/Z_MIN_PIN for Printrboard.
12 years ago
Daniele Sdei
Yuri Valentini
daid303
Kevin O'Connor
Henry Palonen
Nicolas Rossi
Erik vd Zalm
Johann Rocholl
oni303
Sergey Taranenko