18245c6cd2
Update pins_RAMBO.h
Updated for the changes that Thinkyhead made before I submitted mine.
10 years ago
234a9d0b12
Viki 2 Pins from Manual
I added in the pins into the new board files for the Azteeg X3, X3 Pro,
Printrboard, and Rambo. I'm sure it can be added for others too but
these are the manual specified pins. Just like many things here though,
I can't test for the boards other than the Azteeg X3 Pro. Hopefully it
works smoothly for everyone who happens on this nifty display. :)
10 years ago
afff968e88
ARRAY_BY_EXTRUDERS, shorthand to sync planner
- Add some documentation to planner and stepper headers
- Patch up RAMBO pins with undefs
- Add `sync_plan_position` inline to set current XYZE
- Swap indices in `extruder_offset` to fix initialization values
10 years ago
2b0c25a091
Tweak G92 to call plan_set_position only once, yes?
10 years ago
22bea37393
Azteeg X3 Pro Pin Revisions
I added the fan pins in here and left them at -1 in configuration_adv.h
and it works fine. Pinned for a 4 extruder from 1-4 and HE5 being the
controller fan, HE6 being the Extruder Auto Fan/Water pump in the Kraken
case, and HE7 being for part cooling fan. Added in descriptions for the
MIN MAX pin swap and for servo motor additions.
10 years ago
edb67ea165
Patch generic delta config
- Addressing issue mentioned at #1699
10 years ago
c481c3b180
Move variable blink from ultralcd.h to dogm_lcd_implementation.h
to avoid warnings about unused blink.
Concentrate definitions of variables in dogm_lcd_implementation.h to one place.
Make only local used variable currentfont static.
10 years ago
059052889f
Further Sanity Checks for Z_PROBE_AND_ENDSTOP.
10 years ago
8b81f20c61
Filling in more places where Z_PROBE_PIN and Z_PROBE_AND_ENDSTOP need to
be.
Added Sanity Check for it.
Added hook so it's enabled.
10 years ago
fd823449ad
Added serial message for Z Probe trigger.
10 years ago
92eb8109ab
Fix declaration of old_z_probe_endstop.
10 years ago
44b88b41a2
Added credit for code.
10 years ago
2979b40a7a
Fixed typo in Z Probe and Endstop section.
10 years ago
9f3ff14008
Enabled separate Z Probe and Z Axis endstop use at same time.
Typo fixes in comments in existing code.
10 years ago
ba871e46bf
Fix compiler warnings
- Patched up for most included configurations
10 years ago
55739a4efe
Fix Z_APPLY_STEP
10 years ago
df02b992b0
Fix redundant_temperatrure_raw setting
10 years ago
fe29bdd72b
Also fix temperature externs
10 years ago
ce485175eb
Give all temp arrays 4 indices
10 years ago
782464ea4d
Parentheses need here otherwise sanitycheck.h does wrong thing on line 222
10 years ago
460f73056b
Fix ECHOPAIR ambiguity
- Also patch up some warnings
10 years ago
19d418cd6a
Fix up the code to eliminate warnings
10 years ago
b2496533c6
Put " M" into pmem
10 years ago
267d6bef15
Eliminate most warnings
- Fix a bug reading `code_value` for `M503 Sn`
- Hide and remove unused variables
10 years ago
b76a352d41
Fix the planeNormal calculation
10 years ago
410f64782a
Always 4 temp sensors
10 years ago
0b32431551
Remove abs() from planeNormal.z
10 years ago
53169d96e8
Set temp_meas_ready in set_current_temp_raw
10 years ago
04328d7537
Add zprobe_zoffset in set_bed_level_equation_*
- Also a small tweak to SanityCheck.h
10 years ago
78090275a9
Fix probe range editing
- Increase the probe offset range to -20…20
- Apply the range limits to the menu item
10 years ago
1ff6df8f9e
Avoid warnings in SanitiCheck.h
/SanityCheck.h:107:53: warning: missing terminating ' character
...
10 years ago
ebe5b87c2c
< like in the oher compareble loops
to avoid:
Marlin_main.cpp:1790: warning: array subscript is above array bounds.
10 years ago
eab5fad539
code formatting
10 years ago
abadeac08d
Group zprobe_zoffset with bed leveling
10 years ago
32331faee4
Prettify Bed Level Correction Matrix
- Put + in front of positive values in the output
10 years ago
5261d35737
Fix custom m-code behavior
Don’t set CUSTOM_M_CODE_SET_Z_PROBE_OFFSET if there’s no Z probe
10 years ago
96b5da7198
Fix up bed leveling code
- Init `zprobe_zoffset`
- Remove `current_position[Z_AXIS] = zprobe_zoffset` lines from the
`set_bed_level_equation_*` functions
- Apply standards to `mesh_bed_leveling` files
- Document `MESH_BED_LEVELING`
10 years ago
f680e509c4
Enclosed error-messages for TEMP_SENSOR_1_AS_REDUNDANT in PSTR()
10 years ago
d43d47da14
Clean "fromsd" array is not SDSUPPORT
if not have SDSUPPORT the fromsd array is not necessary
10 years ago
ac81b4084f
Make variables and function static.
10 years ago
55025558dc
Implement Dry-Run mode in G29
It just probe all the bed without appliying the matrix.
Useful after a first G29 to check the topology.
10 years ago
a4ad9117dd
comment #define Z_DUAL_STEPPER_DRIVERS
10 years ago
2dfd0e5ce7
Update Configuration.h
documentation how to disable buzzer feedback
10 years ago
4c3cbc0961
use only one implementation for beeper feedback
10 years ago
01cc97a3c3
Corected condition for PIDdT
10 years ago
94330705c7
Move definition of PIDdT back to temperature.h
make it unconditional
remove all definitions in the 'Configuration.h's
remove form 'Conditionals.h'
10 years ago
dd0067afa6
Fix MAX6675 again and introduce set_current_temp_raw()
to make the temperature-code work again with Arduino 1.0.6.
Sorry could not make an extra block on base level.
10 years ago
8848b7e9ef
Add the missed {} to END_MENU in ultralcd.cpp
what caused an extra update of encoderLine most of the time.
10 years ago
4beffbca69
Make SMALL_INFOFONT configurable.
Tweak the documentation
10 years ago
c2ba5d0c09
Fix ZigZag and Topograph table
ZigZag: Inverted Behavior.. If T supplied, it does not zigzag.
Topograph table: The table was rotated 90º clockwise.
10 years ago
Nate Stokes
Scott Lahteine
AnHardt
Chris Roadfeldt
Edward Patel
Christian Bohn
Victor Torre
alexborro
wurstnase