AnHardt
c6d2ebe452
Extend the idea of dummy temperature sensors.
Added a second sensor and made them configurable.
10 years ago
alexborro
a57869ba49
Dummy Thermistor Table for testing purposes
Am I the only one who always need to change the thermistortable.h to add
a dummy table??
Ok, it is done. Just set the thermistor to 999 and it will always read
25C. Great for Testing or Development purposes.
10 years ago
MagoKimbra
986e723eeb
Add 4th extruder
10 years ago
MagoKimbra
0ebf896070
Add 4th extruder
10 years ago
Scott Lahteine
5714f64927
get latest Marlin_v1 changes
10 years ago
Fourmi
af3e4d7510
Update line 627 ,wrong number on thermistortables
Wrong number on line 627 > i change number "12" by the correct number "13"
Soory
10 years ago
Fourmi
a664763e6f
Update thermistortables.h
Add another thermistor table (13),it's a cartridge thermistor up to +300°C,use with Hotend "Simple ONE" & "All In ONE"
Thx
10 years ago
Fourmi
c35736a140
Update thermistortables.h
Add another thermistor table,use with hotend "Simple ONE" & "All in ONE"
10 years ago
cocktailyogi
512f2a3136
restore Branch from Backup
sorry for that
10 years ago
Greg Tan
6e6e4e2143
Added thermistor table for the 500C thermistor shipped with the Pico hot end.
10 years ago
Cameron Lai
da6b536182
Add 5DPrint D8 Driver Board info and temperature table for Makibox hot bed
10 years ago
Nutz95
ed6f4a71c5
fix wrong temptable index
10 years ago
Nutz95
3161740df9
This table is made for thermistor 3950 (can be found on ebay for cheap)
it's caracteristics are :
R25℃ ;100KΩ±1%
B Value(R25/50℃):3990K 1%
Dissipation Factor(mW/℃):1.1~1.6 In still Air
Thermal Time Constant(S):10~17 In Still Air
Operating temperature range: (-50~+260°C)
Dimension: 1.8mm Dia X4.1mm
Lead Length :30mm
This table was found on the following blogs:
http://cae2100.wordpress.com/2014/03/08/beta3950-thermistor-table-for-marlin/
and
http://microfabricator.com/articles/view/id/531ad7e59aad9d3131000000/beta-3950-thermistor-table-for-marlin
10 years ago
David Forrest
b0093a1513
thermistortables.h: Add comments that table 60 uses beta=3950.
11 years ago
Josef Pavlik
831fc2a952
Pt100 and Pt1000 temperature sensors handling
11 years ago
daid
df194f75e1
Added PT100 support for Ultiboard2
11 years ago
Nicolas Rossi
4623e78ce0
Added Honeywell thermistor 135-104LAF-J01
11 years ago
Ryan Turner
7c47e7162d
Adding Maker's Tool Works heated bed thermistor
12 years ago
whosawhatsis
6a61a3c0b4
missing comma in last commit
12 years ago
whosawhatsis
f0aee4101a
regenerated thermistor table 7
Generated with createTemperatureLookup.py. The old table crapped out at
270C, which was a problem for polycarbonate.
12 years ago
daid303
2f60e324dc
Fixed #394
12 years ago
Denis B
49b2ddc8c1
Cleaned up non-standard characters
12 years ago
Daniele Sdei
3cf59f6f9a
add RepRapPro Huxley thermistor tables
12 years ago
daid303
7577717b59
Fixed #336
12 years ago
daid303
52158dffcc
Big temperature code update. No longer converts back and forwards between temperature and raw sample value. Reducing complexity, removing code. Also named some variables better. While keeping the safety intact and functionality the same.
12 years ago
MaikStohn
2b7b1e52b1
allow marlin internal 0°C represenation
12 years ago
Erik vd Zalm
0e89022cc3
Correct temptable_55 name.
12 years ago
Bernhard Kubicek
b7fc14bc65
repaired thermistortable_6 by graphcial fitting of the off-slope values. see issue 179. Erik, I know you asked for no changes, but this file probably is not related and hopefully allright.
12 years ago
linagee
2e8c5049c5
Update Marlin/thermistortables.h
12 years ago
linagee
2d0d8e5272
Small correction.
12 years ago
linagee
9e9db65c3f
Update Marlin/thermistortables.h
12 years ago
linagee
bd966ef389
Update Marlin/thermistortables.h
12 years ago
linagee
775da3f103
Added top ratings and extended to ADC=1 for table 3 and 5.
12 years ago
linagee
96a4baa0be
Update Marlin/thermistortables.h
12 years ago
linagee
2aa9f7b131
Update Marlin/thermistortables.h
12 years ago
linagee
dd9144994e
Tested May 19 - It works! Verified with separate thermocouple TM-902C also.
12 years ago
linagee
4c37d0d9f1
Extended range above 250C. (Operating range states up to 300C)
12 years ago
linagee
241f5a4c0e
Update Marlin/thermistortables.h
12 years ago
MaikStohn
b657a18449
Revert "magic PROGMEM defines to avoid hundreds of wrong GCC warnings"
This reverts commit 3682d9bd5b
.
12 years ago
MaikStohn
3682d9bd5b
magic PROGMEM defines to avoid hundreds of wrong GCC warnings
12 years ago
Bernhard
57f9359a41
simplified the includes, makefile now works with arduino23
13 years ago
Denis B
4fd75dc813
Working version of multiple extruders (up to 3)
- The temperature control is pretty much complete
(not sure what to do w/ autotemp though)
Changed the pins assignment to clearly separate bed and extruder heaters
and temp sensors, changed a bit how termistor tables are handled.
- The steppers control is rudimentary
(only chanages what pins it uses depending on the active_extruder var,
but that's enough for switching extruder in the start.gcode in the
the profiles)
- Tested only w/ RAMPS 1.4
13 years ago
Bernhard Kubicek
a9c7da06e3
and changed ultipanel to have the mm/sec and not mm/min
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
Conflicts:
Marlin/Marlin.pde
Marlin/ultralcd.h
13 years ago
Erik van der Zalm
65934eee9c
A lot of changes in the planner code
13 years ago
Erik van der Zalm
d15f01e1b4
Temperature changes
13 years ago
Bernhard Kubicek
40e8081623
changed end of line to windows, which seems to be the majority of developers main platform.
13 years ago
Bernhard Kubicek
00674af3a8
merge from the branch bkubicek/Marlin/zalmmerge
13 years ago
Erik van der Zalm
bf879ceaa9
Added thermistor tables
13 years ago
Erik van der Zalm
094afe7c10
Merged Marlin, Marlin non gen6 and Ultimaker changes
13 years ago
Erik van der Zalm
750f6c33e3
first commit
13 years ago