ab624eac2a
revert COnfiguratiuon to the same as head
11 years ago
fb20ceabce
enable soft endstops for delta
disable delta by default
11 years ago
d01ee7e7b5
fix zjerk being the same for delta as xy jerk
add more delta defaults
on delta make second home even slower
11 years ago
f3aa2a48e7
update max pos
11 years ago
460751503e
Added default configurations for deltas when DELTA is defined
11 years ago
c4a2077951
M109 and M190 now wait when cooling down if R is used instead of S.
M109 S180 waits only when heating.
M109 R180 also waits when cooling.
11 years ago
6397b3339c
restored configuration.h defaults
11 years ago
e509cdbeb0
added contrast control function for gLCDs
11 years ago
99b7e926e7
added MaKr3d Melzi board
11 years ago
ecf3ab5de4
Added thermistor 60 to configuration.h
11 years ago
2015989f84
Added DISABLE_MIN_ENDSTOPS
11 years ago
648d45cfb2
Fix Pin Description Typo
Reverse 'Bed' and 'Fan' at the RAMPS 33 Description.
Signed-off-by: Christian Inci <chris.pcguy.inci@gmail.com>
11 years ago
02dee80fa5
added Azteeg X1 motherboard
11 years ago
e34c9981ab
Delta disabled by default
11 years ago
ff6fa09ecf
Moved corexy implementation from stepper to planner
(Thanks iquizzle)
11 years ago
c8dcc7c208
Allow increasing the software PWM frequency.
11 years ago
c1cb5977ee
Update Configuration.h
11 years ago
8a5bd8a808
Update Configuration.h
11 years ago
6588933c04
Update Configuration.h
11 years ago
5dabc95409
Apply all changes from latest Marlin_V1
Diffed and merged, preserving my updates
11 years ago
f4f30c9d64
Added servo actuated enstop coding to allow G28 command to engage and retract a servo to specified angles.
11 years ago
5090c56651
More redundant temp sensor changes. (After testing and debugging by reifsnderb)
11 years ago
b78fa6bb70
Added support for Megatronics v2.0 and Minitronics v1.0
merged from code downloaded from reprapworld.com
11 years ago
9be61cdc02
Added redundant temp sensor
11 years ago
e2ff536b03
Fixed typo in Comment
11 years ago
28ada096e2
Adding servo documentation
11 years ago
dc59f07d24
First attempt at refactoring of original servo code. Only adding servo support as a start to keep things simple.
11 years ago
bd2cd4903e
Added #ifdef BARICUDA around the BariCUDA changes
11 years ago
2739c26c4f
changes:
- changed the variables from keypad to reprapworld_keypad
- added a missing ifdef check
11 years ago
6fb9573157
added support for the reprapworld keypad
11 years ago
1fa61c297e
Turning off Control Panel by Default and Updating the link to the LiquidCrystal_I2C library to avoid confusion.
11 years ago
b27a59f41e
Added support for Elefu RA Board and Elefu Control Panel
11 years ago
0ef54f2f85
Make M303 silent when "S0" is sent
If S is left out perhaps it should be silent, but check the spec for
this M code.
11 years ago
a200521eab
Added CUSTOM_MENDEL_NAME option to Configuration.h and language.h
Also cosmetic comment changes and spelling corrections in printed
messages
11 years ago
1a397825f9
fix DEFAULT_AXIS_STEPS_PER_UNIT minor Z rounding error
11 years ago
d71f1e9bf6
Add (as an option) slower SD transfer mode
11 years ago
13596e8722
Added RepRapDiscount FULL GRAPHIC Smart Controller
11 years ago
c80a78bb70
Lower the default max E feedrate a bit. With the stepper fix this is much to high.
11 years ago
7a5c474d91
Update Configuration.h
11 years ago
9322c408c6
Updated for LiquidTWI2 library version 1.2.3
The new version of the library means that PANELOLU no longer needs to be
defined in LiquidTWI.h (the library file can be used as is) and the new
version of the library also enables the buzzer on the Panucatt VIKI
panel.
11 years ago
fd5b7e0cec
Separate PID_MAX from BANG_MAX
This allows PID_FUNCTIONAL_RANGE to use a maximum duty cycle higher
than PID_MAX. This is useful for powerful heaters to heat quickly in
bang-bang mode, but use a lower duty cycle that is easier to stabilize
in PID mode.
11 years ago
72419f69a9
Added rumba
11 years ago
5de25ccd20
Add Motherboard variant 64 - STB V1.1
Definition for the graphic LCD are already in it, they will not harm the
configuration as they are only defined constants
11 years ago
aba67e2449
No bed config for RAMPS
The motherboard 35 is a config without bed with this pins setting :
D8 Extruder
D9 Fan
D10 Controller Fan
11 years ago
7bad72359c
Support encoder click on PANELOLU2 being read through I2C
This change also handles the case where the pause/stop/restart button on
the VIKI is not used. Make LCD I2C buzz sound the same as the normal
buzz (300ms is too long for quick feedback).
11 years ago
1daf2f3256
Number of extruders is not an advanced configuration - it is a basic property.
11 years ago
b2c1c64fb1
Add Motherboard variant 64 - STB V1.1
Definition for the graphic LCD are already in it, they will not harm the
configuration as they are only defined constants
11 years ago
6beb42cdf6
Attempt to address Bernhard's comments
Refactor configuration to try to make items clearer (what defines a
panel vs what is user changeable).
11 years ago
839bef6d5d
Fix Configuration.h file to not define LCDs be default.
Also fix compile time check in Marlin.pde
11 years ago
1292d735ba
Converge all I2C LCD branches (PANELOLU2, VIKI & PCF8575)
This includes refactoring the buttons code to remove a large amount of
non-pin dependent duplication from pins.h.
11 years ago
Jim Morris
Erik van der Zalm
Michael Mayer
Christian Inci
lajos
BorisLandoni
Scott Lahteine
Gord Christmas
Gatulibu
Alexander Kasimir
gregor
Tim Anderson
kiyoshigawa
Martin Renold
Lukasz Stefanowicz
MaikStohn
daid303
Robert F-C
whosawhatsis
blddk
Dirk Eichel
Nicolas Rossi