Tree: a644d8cb93

FB4S_WIFI

FBG5_WIFI

MKS_UI

vanilla_fb_2.0.x

2.0.7.2

2.0.7.2_upd

2.0.8.1

2.0.9.1

2.0.9.2

2.0.9.3

Branches Tags

${ item.name }

Create tag ${ searchTerm }

Create branch ${ searchTerm }

from 'a644d8cb93'

${ noResults }

Commit Graph

179 Commits (a644d8cb93aba193df5f2f8897d0ff896cee5b6b)

Author	SHA1	Message	Date
Alexander Amelkin	2ecfda80ac	Improve support for JTAG/SWD pins reuse (#11963) STM32 can reuse JTAG and SWD pins separately. Add `DISABLE_DEBUG` option to disable both interfaces and retain `DISABLE_JTAG` to disable JTAG only.	6 years ago
Alexander Amelkin	84926b1d5a	HAL general support for DISABLE_JTAG option (#11211) Some STM32-based boards may use multiplexed JTAG pins as IO. Up to now the `DISABLE_JTAG` option (defined in pins files) was only supported for AT90-based boards. This commit generalizes the code and adds support for boards based on STM32F1 and STM32F4.	6 years ago
Scott Lahteine	1718eff54a	Code changes supporting up to 6 extruders	6 years ago
Thomas Moore	c437bb08f1	Overhaul of the planner (#11578) - Move FWRETRACT to the planner - Combine leveling, skew, etc. in a single modifier method - Have kinematic and non-kinematic moves call one planner method	6 years ago
Scott Lahteine	1933d5d6fb	Fix SD autostart with no LCD	6 years ago
Sam Lane	1b6bc19427	Add external closed loop controller support	6 years ago
Scott Lahteine	56f1e17a25	[2.0.x] Max7219 cleanup, simplify, and extend (#11575)	6 years ago
teemuatlut	fbcdf5eaeb	Simplify stepper driver per-axis selection	6 years ago
Scott Lahteine	566d05006d	report_state > event_handler Make the endstop report method track endstop changes on its own.	6 years ago
Scott Lahteine	1a0f4dedad	Fix and improve POWER_LOSS_RECOVERY (#11187)	6 years ago
TheLongAndOnly	cedc158106	[2.0.x] Board specific init macro (#11170)	6 years ago
Scott Lahteine	d4795e5b8e	[2.0.x] Tweaks and additions for MAX7219 (#11034)	6 years ago
Simon Jouet	e2aeda61ed	HAL for Espressif ESP32 Wifi	7 years ago
Scott Lahteine	f2c3b0d476	Use bit flags for homed/known	6 years ago
Scott Lahteine	968a5d2e63	Protected pin err for M226	6 years ago
Scott Lahteine	0ca9db7051	Correct HOTENDS for SWITCHING_EXTRUDER	6 years ago
etagle	569df3fc0c	Fix interrupt-based endstop detection - Also implemented real endstop reading on interrupt.	6 years ago
etagle	a11eb50a3e	Refactor and optimize Stepper/Planner Better encapsulation and considerably reduce stepper jitter	6 years ago
GMagician	3c76bda2d8	Fix switching extruder `DONT_SWITCH` got lost along the way. Replace it with `DO_SWITCH_EXTRUDER` and adjust the code.	6 years ago
Scott Lahteine	35258dd50b	Consistent heating status and status reset Fix #10699	6 years ago
Scott Lahteine	625035a9ce	Fix M301 access to lpq_len (#10714) Co-Authored-By: Zwaubel	6 years ago
Scott Lahteine	306f0f2135	Move Stepper::synchronize to Planner (#10713) Co-Authored-By: ejtagle <ejtagle@hotmail.com>	6 years ago
Scott Lahteine	05fca752d6	Clean up autostart handling	6 years ago
Scott Lahteine	11ab017dd0	Creality3D Power-Loss Recovery	6 years ago
Scott Lahteine	6c7a17dba6	Abort SD printing more safely (#10407) Allow the current command to complete when aborting an SD print, otherwise some commands (G28, G29, etc.) will cause trouble.	6 years ago
Chris Pepper	cc6d41e1d3	Use a macro for HAL header redirection (#10380)	6 years ago
Scott Lahteine	56486c5c0e	Apply const to manage_inactivity	6 years ago
Bob-the-Kuhn	902c885782	Switch to TMC2130 compatible hardware SPI & misc (#10299)	6 years ago
Scott Lahteine	adcb87f0db	Z Endstop Servo => Z Probe Servo	6 years ago
Scott Lahteine	1cb810ff1c	[2.0.x] Automatically reset stepper timeout (#10179) * Automatically reset stepper timeout in manage_inactivity Any code that adds moves to the planner can skip resetting the stepper timeout. We can let `idle` / `manage_inactivity` reset the timer whenever it detects any moves in the planner. * blocks_queued => has_blocks_queued	6 years ago
Eduardo José Tagle	97e8a6ebd9	Various fixes for DUE... (#10152) - Watchdog reset during SD Card initialization. - Move `DebugMonitor` to `DebugMonitor_Due.cpp`. - Since the watchdog is enabled on boot do extra resets during init. - Have `thermalManager` do watchdog reset before its ISR starts to prevent reset. - Ensure that timers are stopped before reprogramming them to address tone issues. - Improve SAM3XE reset when reflashed through the native port.	6 years ago
Scott Lahteine	9fd1016bb1	Trust the bootloader to clear globals	6 years ago
Scott Lahteine	ae39fbd646	Also suppress keepalive with suspend_auto_report	6 years ago
Bob-the-Kuhn	53362b81cc	Tone fixes/changes (#10151)	6 years ago
Scott Lahteine	72281c4ff9	Turn power off in `kill` instead of setting PS_ON to input	6 years ago
Scott Lahteine	0543362b34	Don't init the tone timer if no BEEPER_PIN	6 years ago
Scott Lahteine	317673fec3	Init watchdog last in setup()	6 years ago
Scott Lahteine	eb212ae073	Add suspend_auto_report flag to suppress auto-report	6 years ago
Scott Lahteine	ffbf63e6af	Add HAS_TEMP_SENSOR conditional	6 years ago
Scott Lahteine	36262a0479	Use static classes for job timers (#9938)	6 years ago
Bob-the-Kuhn	025118da3e	Init print_job_timer in setup() instead of "early" (#9937)	6 years ago
TheSFReader	eb079959fb	Report sd card progress [FR] #9751 (#9832) * SD Status auto-report feature Feature Request #9751	6 years ago
Scott Lahteine	cfdcf91df5	Fix compile error with initTone	6 years ago
Scott Lahteine	65519263f4	Fix broken LEVEL_BED_CORNERS Fix #8805	6 years ago
Scott Lahteine	73cd34b121	Finish AUTO_POWER_CONTROL implementation Followup to #9503	6 years ago
Studiodyne	d3ca82d8c2	Support for multiple filament runout sensors	6 years ago
Scott Lahteine	ca55f2927a	Pulldown pin mode support (#9701) Implemented for LPC1768.	6 years ago
Scott Lahteine	93c0198b2d	Init LCD welcome message programmatically	6 years ago
teemuatlut	5990266724	Init CS pins before loading settings (#9566)	6 years ago
Scott Lahteine	112917cfef	No EXTRUDER_RUNOUT_PREVENT during print	6 years ago