7b556d2e96
Added BT support on AT90USB devices
Added AT90USB device BT connectivity support using second UART.
11 years ago
a5e8575829
Add UUID support to M115 responses.
11 years ago
b5a964fcc5
Initial SAV MkI (RepRap CloneWars board) integration.
Included support for BT dongle on AT90USB boards.
Added LCD Shift Register LCD control
Included support for RepRap Clone Wars project board (SAV MKI).
11 years ago
f941203172
PS_ON configurable boot state
Allows the user to select wheter or not the PSU should be turned on or
kept in standby when marlin boots
11 years ago
8a08cca0f2
Added temperature status less.
Hopefully fixed viky button handling without braking other boards
11 years ago
6f85a8c7aa
Bed auto Leveling change: Raise Z before homing
- Added "Z_RAISE_BEFORE_HOMING" for raising Z the defined distance
before homing. This is useful to avoid Z-Probe collision when hotend is
near bed.
- Fixed the issue of Z not going bellow Z_PROBE_OFFSET when
"min_software_endstops" is true.
Now the Z_PROBE_OFFSET is not set in Z_MIN_POS, it is added after
homing.
11 years ago
253dfc4bc1
Bed Auto Leveling feature
Check the Readme for instruction how to enable and configure the feature
11 years ago
57173739a1
Update Configuration.h
Include CPU Sethi 3D
11 years ago
0dca49a7c0
Added Azteeg X3 board.
11 years ago
d8c2c810b4
Added info to the delta configuration files in the configuration.h file
11 years ago
9bc88f8bab
Placed optional ENCODER_PULSES_PER_STEP in the configuration.h file
11 years ago
61db046b32
Added #ifdef BLINKM around new code. Also refined BlinkM.h.
11 years ago
3626b5ad8b
Removed Delta from the default config file.
Changed EEPROM CHITCHAT behavior. M503 is always enabled.
11 years ago
88dfeefca3
Define BlinkM default disabled
11 years ago
7016cc9511
Added BlinkM support over i2c
11 years ago
3b315b3da0
Added BlinkM support over i2c
11 years ago
2ca983568d
separate INVERTING for MIN and MAX endstops (6 #defines instead of 3)
11 years ago
9bf1cf1b22
Pre-calculate diagonal rod length squared
11 years ago
4623e78ce0
Added Honeywell thermistor 135-104LAF-J01
11 years ago
ab624eac2a
revert COnfiguratiuon to the same as head
11 years ago
fb20ceabce
enable soft endstops for delta
disable delta by default
11 years ago
d01ee7e7b5
fix zjerk being the same for delta as xy jerk
add more delta defaults
on delta make second home even slower
11 years ago
f3aa2a48e7
update max pos
11 years ago
460751503e
Added default configurations for deltas when DELTA is defined
11 years ago
c4a2077951
M109 and M190 now wait when cooling down if R is used instead of S.
M109 S180 waits only when heating.
M109 R180 also waits when cooling.
11 years ago
6397b3339c
restored configuration.h defaults
11 years ago
e509cdbeb0
added contrast control function for gLCDs
11 years ago
99b7e926e7
added MaKr3d Melzi board
11 years ago
ecf3ab5de4
Added thermistor 60 to configuration.h
11 years ago
2015989f84
Added DISABLE_MIN_ENDSTOPS
11 years ago
648d45cfb2
Fix Pin Description Typo
Reverse 'Bed' and 'Fan' at the RAMPS 33 Description.
Signed-off-by: Christian Inci <chris.pcguy.inci@gmail.com>
11 years ago
02dee80fa5
added Azteeg X1 motherboard
11 years ago
e34c9981ab
Delta disabled by default
11 years ago
ff6fa09ecf
Moved corexy implementation from stepper to planner
(Thanks iquizzle)
11 years ago
c8dcc7c208
Allow increasing the software PWM frequency.
11 years ago
c1cb5977ee
Update Configuration.h
11 years ago
8a5bd8a808
Update Configuration.h
11 years ago
6588933c04
Update Configuration.h
11 years ago
5dabc95409
Apply all changes from latest Marlin_V1
Diffed and merged, preserving my updates
11 years ago
f4f30c9d64
Added servo actuated enstop coding to allow G28 command to engage and retract a servo to specified angles.
11 years ago
5090c56651
More redundant temp sensor changes. (After testing and debugging by reifsnderb)
11 years ago
b78fa6bb70
Added support for Megatronics v2.0 and Minitronics v1.0
merged from code downloaded from reprapworld.com
11 years ago
9be61cdc02
Added redundant temp sensor
11 years ago
e2ff536b03
Fixed typo in Comment
11 years ago
28ada096e2
Adding servo documentation
11 years ago
dc59f07d24
First attempt at refactoring of original servo code. Only adding servo support as a start to keep things simple.
11 years ago
bd2cd4903e
Added #ifdef BARICUDA around the BariCUDA changes
11 years ago
2739c26c4f
changes:
- changed the variables from keypad to reprapworld_keypad
- added a missing ifdef check
11 years ago
6fb9573157
added support for the reprapworld keypad
11 years ago
1fa61c297e
Turning off Control Panel by Default and Updating the link to the LiquidCrystal_I2C library to avoid confusion.
11 years ago
fmalpartida
Kaz Walker
dumle29
Erik van der Zalm
Alex Borro
phq1910
Tim Koster
hg42@gmx.net
Nicolas Rossi
Jim Morris
Michael Mayer
Christian Inci
lajos
BorisLandoni
Scott Lahteine
Gord Christmas
Gatulibu
Alexander Kasimir
gregor
Tim Anderson