7b2550a604
Times can't be negative.
cardreader.cpp needs temperature.h for autotempShutdown() when
AUTOTEMP is defined but warns about unused variables.
Unpublished variables by putting them in to temperature.cpp.
9 years ago
507efa771b
Remove unused variable fan_rot
and satisfy the compiler about the implicit compare.
9 years ago
2b959a7752
Some additional {} to make the compiler happy.
9 years ago
0f1bd6e4a7
In ST7920_SWSPI_SND_8BIT(uint8_t val) parameter is unsigned
therefor in macro ST7920_WRITE_BYTE(a) cast a to uint8_t
to make the compiler happy.
9 years ago
afff968e88
ARRAY_BY_EXTRUDERS, shorthand to sync planner
- Add some documentation to planner and stepper headers
- Patch up RAMBO pins with undefs
- Add `sync_plan_position` inline to set current XYZE
- Swap indices in `extruder_offset` to fix initialization values
9 years ago
2b0c25a091
Tweak G92 to call plan_set_position only once, yes?
9 years ago
22bea37393
Azteeg X3 Pro Pin Revisions
I added the fan pins in here and left them at -1 in configuration_adv.h
and it works fine. Pinned for a 4 extruder from 1-4 and HE5 being the
controller fan, HE6 being the Extruder Auto Fan/Water pump in the Kraken
case, and HE7 being for part cooling fan. Added in descriptions for the
MIN MAX pin swap and for servo motor additions.
9 years ago
edb67ea165
Patch generic delta config
- Addressing issue mentioned at #1699
9 years ago
c481c3b180
Move variable blink from ultralcd.h to dogm_lcd_implementation.h
to avoid warnings about unused blink.
Concentrate definitions of variables in dogm_lcd_implementation.h to one place.
Make only local used variable currentfont static.
9 years ago
ba871e46bf
Fix compiler warnings
- Patched up for most included configurations
9 years ago
55739a4efe
Fix Z_APPLY_STEP
9 years ago
df02b992b0
Fix redundant_temperatrure_raw setting
9 years ago
fe29bdd72b
Also fix temperature externs
9 years ago
ce485175eb
Give all temp arrays 4 indices
9 years ago
782464ea4d
Parentheses need here otherwise sanitycheck.h does wrong thing on line 222
9 years ago
460f73056b
Fix ECHOPAIR ambiguity
- Also patch up some warnings
9 years ago
19d418cd6a
Fix up the code to eliminate warnings
9 years ago
b2496533c6
Put " M" into pmem
9 years ago
267d6bef15
Eliminate most warnings
- Fix a bug reading `code_value` for `M503 Sn`
- Hide and remove unused variables
9 years ago
b76a352d41
Fix the planeNormal calculation
9 years ago
410f64782a
Always 4 temp sensors
9 years ago
0b32431551
Remove abs() from planeNormal.z
9 years ago
53169d96e8
Set temp_meas_ready in set_current_temp_raw
9 years ago
04328d7537
Add zprobe_zoffset in set_bed_level_equation_*
- Also a small tweak to SanityCheck.h
9 years ago
78090275a9
Fix probe range editing
- Increase the probe offset range to -20…20
- Apply the range limits to the menu item
9 years ago
1ff6df8f9e
Avoid warnings in SanitiCheck.h
/SanityCheck.h:107:53: warning: missing terminating ' character
...
9 years ago
ebe5b87c2c
< like in the oher compareble loops
to avoid:
Marlin_main.cpp:1790: warning: array subscript is above array bounds.
9 years ago
eab5fad539
code formatting
9 years ago
abadeac08d
Group zprobe_zoffset with bed leveling
9 years ago
32331faee4
Prettify Bed Level Correction Matrix
- Put + in front of positive values in the output
9 years ago
5261d35737
Fix custom m-code behavior
Don’t set CUSTOM_M_CODE_SET_Z_PROBE_OFFSET if there’s no Z probe
9 years ago
96b5da7198
Fix up bed leveling code
- Init `zprobe_zoffset`
- Remove `current_position[Z_AXIS] = zprobe_zoffset` lines from the
`set_bed_level_equation_*` functions
- Apply standards to `mesh_bed_leveling` files
- Document `MESH_BED_LEVELING`
9 years ago
f680e509c4
Enclosed error-messages for TEMP_SENSOR_1_AS_REDUNDANT in PSTR()
9 years ago
d43d47da14
Clean "fromsd" array is not SDSUPPORT
if not have SDSUPPORT the fromsd array is not necessary
9 years ago
ac81b4084f
Make variables and function static.
9 years ago
55025558dc
Implement Dry-Run mode in G29
It just probe all the bed without appliying the matrix.
Useful after a first G29 to check the topology.
9 years ago
a4ad9117dd
comment #define Z_DUAL_STEPPER_DRIVERS
9 years ago
2dfd0e5ce7
Update Configuration.h
documentation how to disable buzzer feedback
9 years ago
4c3cbc0961
use only one implementation for beeper feedback
9 years ago
01cc97a3c3
Corected condition for PIDdT
9 years ago
94330705c7
Move definition of PIDdT back to temperature.h
make it unconditional
remove all definitions in the 'Configuration.h's
remove form 'Conditionals.h'
9 years ago
dd0067afa6
Fix MAX6675 again and introduce set_current_temp_raw()
to make the temperature-code work again with Arduino 1.0.6.
Sorry could not make an extra block on base level.
9 years ago
8848b7e9ef
Add the missed {} to END_MENU in ultralcd.cpp
what caused an extra update of encoderLine most of the time.
9 years ago
4beffbca69
Make SMALL_INFOFONT configurable.
Tweak the documentation
9 years ago
c2ba5d0c09
Fix ZigZag and Topograph table
ZigZag: Inverted Behavior.. If T supplied, it does not zigzag.
Topograph table: The table was rotated 90º clockwise.
9 years ago
0ce3576685
New Feature: Z_DUAL_ENDSTOPS
Z_DUAL_ENDSTOPS is a feature to enable the use of 2 endstops for both Z
steppers - Let's call them Z stepper and Z2 stepper.
That way the machine is capable to align the bed during home, since both
Z steppers are homed.
There is also an implementation of M666 (software endstops adjustment)
to this feature.
After Z homing, this adjustment is applied to just one of the steppers
in order to align the bed.
One just need to home the Z axis and measure the distance difference
between both Z axis and apply the math: Z adjust = Z - Z2.
If the Z stepper axis is closer to the bed, the measure Z > Z2 (yes, it
is.. think about it) and the Z adjust would be positive.
Play a little bit with small adjustments (0.5mm) and check the
behaviour.
The M119 (endstops report) will start reporting the Z2 Endstop as well.
9 years ago
c686069ccd
Revert "Remove 6x9 font"
This reverts commit e6cb8ee188
9 years ago
b00a531df8
Revert "Removed now unneded FONT_STATUSMENU"
This reverts commit 8c5bb38748
9 years ago
fc53e43de6
Don't test raw temp for MAX6675
- Remove test of raw temp for thermistor 0 when using MAX6675
- Longer `raw_temp_value` array for `TEMP_SENSOR_1_AS_REDUNDANT`
9 years ago
1fac388664
Revert measurement loop
9 years ago
AnHardt
Scott Lahteine
Natealus
Edward Patel
Christian Bohn
Victor Torre
alexborro
wurstnase